summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2015-09-06First fastboot commit, MLO built here wont work so be careful.mattis fjallstrom
Change-Id: Ic8d65a92da82896282eee71cf0d0515f64c939bc
2015-03-24Adding some environment variables which makes the life of a kernel ↵mattis fjallstrom
programmer easier. Change-Id: Ib1bcee870336c9f971ed561bd2a1c0af2d2edc78
2015-01-29Cleaned up and double-verified BCH8 build and setupsmattis fjallstrom
Change-Id: I0650578aed380254fa9fa02bc924a43875923c5d
2015-01-27FINALLYgit status ./! committing the omap3_h1 header file.mattis fjallstrom
Change-Id: I04bc20ae19283314712f2e57d67b18041ae0cb34
2015-01-19Changes to config file for BCH8mattis fjallstrom
Change-Id: Ia144822905f51971a9893380f18c9a90d4816f39
2014-11-11Cleaned up broken solution for building with software ECC.mattis fjallstrom
Change-Id: Ibd0e5688eb23d3d9d5a5c14efcfabf059404fe47
2014-10-30Allow building for software ECC from the commandline - flag is SW_ECC=1.mattis fjallstrom
Change-Id: Ibb9d5084b21e1d6b518737cf9b4a231373cad1b3
2014-10-29Software ECC and adding 3000000 as a baudrate possibilitymattis fjallstrom
Change-Id: I5983c76c4c514bbb579ae331fa3c480c5d5b16ac
2014-10-15Adding memtest and build-time flag for SPL serial bootmattis fjallstrom
Change-Id: Iaf14e63498c3cdca4e2125b8217195b90caf842b
2014-09-29Redefining memory config, and ECC settingsEvan Wilson
2014-09-01Enabling NAND UNLOCK command on H1 boardEvan Wilson
2014-05-09Updated pinmux and boot commandsEvan Wilson
2014-04-07Changes for 2014.01 U-boot versionEvan Wilson
2014-04-03U-boot flashed and bootingEvan Wilson
2014-04-03Changes to custom pinmuxEvan Wilson
2014-04-03Updated memory configuration(NAND and DDR). Removed led.c from board init. ↵Evan Wilson
Simplified bootcommand procedure
2014-04-03Removed TWL4030 supportEvan Wilson
2014-04-03Removed USB and Ethernet supportEvan Wilson
2014-04-03Removed LED and MMC supportEvan Wilson
2014-04-03Removed code not related to AM37Evan Wilson
2014-04-03Created H1 board portEvan Wilson
2014-01-17omap3_beagle: use omap3-beagle.dtb for the C4 revisionRobert Nelson
findftd is currently setting fdtfile to undefined for the beagle c4, select omap3-beagle.dtb instead Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
2014-01-17vexpress/armv8: Fix incorrect ethernet controllerBhupesh Sharma
This patch enables ethernet support in ARMv8 foundation model. The ARMv8 foundation model supports a SMSC91C111 integrated MAC and PHY module which is present at base address 0x01A000000. The previous implementation had enabled SMSC9115 ethernet controller which is not present on the ARMv8 foundation model. Tested on ARMv8 foundation model v1 and v2 by running ping/tftp between the foundation model and the host PC via a bridged network. Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
2014-01-17ARM: trats2: dfu: Enable default Poll Timeout for Trats2 boardŁukasz Majewski
Provide default Poll Timeout value for Trats2 board. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Minkyu Kang <mk7.kang@samsung.com>
2014-01-17config: Update envs for trats and trats2 - Disable L2 cacheŁukasz Majewski
Disable L2 caches for Trats and Trats2 devices. It turns out that for data downloading with thordown command L2 cache disablement brings a significant speed improvement. rootfs - 400 MiB: - L2 cache enabled: 2.69 MiB/s - L2 cache disabled: 5.56 MiB/s Such improvement is possible due to reduction of the need to invalidate redundant data, which resides in L2 cache. Since the sent USB request size at once is 512B (L1 - 32 KiB in total) - one can be quite confident that it is already available in L1 and L2 can be disabled. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Minkyu Kang <mk7.kang@samsung.com>
2014-01-16config: Update envs for trats and trats2 - new entries for new partitionsŁukasz Majewski
This patch adds extra dfu_alt_info entries to support storing the whole BOOT , DATA and UMS partitions. This allows upgrade of uImage and device tree blob (dtb) files at once. Now it is also possible to store ext4 rootfs prepared with well established linux tools (like mkfs.ext4). Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Minkyu Kang <mk7.kang@samsung.com>
2014-01-16Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini
2014-01-16arm: koelsch: Add support QSPI device and enable boot from SPI flashNobuhiro Iwamatsu
This supports SH-QSPI device on koelsch board, and enable booting from SPI flash. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2014-01-16arm: lager: Add support QSPI device and enable boot from SPI flashNobuhiro Iwamatsu
This supports SH-QSPI device on lager board, and enable booting from SPI flash. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2014-01-15Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD
2014-01-15mx6: Add initial support for the Hummingboard soloFabio Estevam
SolidRun has designed the Hummingboard board based on mx6q/dl/solo. Add the initial support for the mx6 solo variant. More information about this hardware can be found at: http://imx.solid-run.com/wiki/index.php?title=Carrier-One_Hardware (Carrier-One was the previous name of Hummingboard). Based on the work from Jon Nettleton <jon.nettleton@gmail.com>. Signed-off-by: Jon Nettleton <jon.nettleton@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
2014-01-14Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini
2014-01-14Merge 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD
2014-01-14mx1ads: remove board supportAlbert ARIBAUD
Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: Stefano Babic <sbabic@denx.de>
2014-01-13Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini
2014-01-13Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini
2014-01-13ARM: pxa: Fix OneNAND window access on VPAC270Marek Vasut
Access the OneNAND 1KiB window on the VPAC270 as an SRAM instead of accessing it as a burst-RAM. This fixes a problem where the board failed to reboot sometimes as the CPU couldn't start executing from the OneNAND 1KiB window. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com>
2014-01-13usb: ums: wait for usb cable connection before enter ums modePrzemyslaw Marczak
Before this change ums mode can not be entered when device was using the same usb port for usb/uart communication. Switching USB cable from UART to USB always causes ums exit. Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com>
2014-01-13usb: exynos5: arndale: Add network supportInderpal Singh
Arndale board has AX88760, which is USB 2.0 Hub & USB 2.0 Ethernet Combo controller, connected to HSIC Phy of USB host controller via USB3503 hub. This patch uses board specific board_usb_init function to perform reset sequence for USB3503 hub and enables the relevant config options for network to work. Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org> Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
2014-01-13mx6slevk: Include "mx6_common.h"Fabio Estevam
Include "mx6_common.h" so that some ARM errata are applied and also the vddsoc regulator can be changed. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
2014-01-13wandboard: Set default environment to use zImageJohn Weber
Change the default environment to use zImage instead of uImage, this requires changes to the default environment to load a file named zImage instead of uImage, and to use the 'bootz' command instead of 'bootm' when booting the kernel. The zImage works for FSL Linux's kernel fork versions 3.0.35, 3.10.9, and 3.10.17; this also works fine for mainline kernels. Signed-off-by: John Weber <rjohnweber@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2014-01-13mx6sabresd: Add eMMC specific environment to allow U-Boot updateOtavio Salvador
A new 'update_emmc_firmware' target is added to allow for easy U-Boot update in the eMMC as it has secury boot partition and this needs specific handling on how to program the specific partition. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2014-01-12sf: Add dual memories support - DUAL_PARALLELJagannadha Sutradharudu Teki
This patch added support for accessing dual memories in parallel connection with single chipselect line from controller. For more info - see doc/SPI/README.dual-flash Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-12sf: Add dual memories support - DUAL_STACKEDJagannadha Sutradharudu Teki
This patch added support for accessing dual memories in stacked connection with single chipselect line from controller. For more info - see doc/SPI/README.dual-flash Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-12sf: Code cleanupsJagannadha Sutradharudu Teki
- comment typo's - func args have a proper names Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-11sf: Discover read dummy_byteJagannadha Sutradharudu Teki
Discovered the read dummy_byte based on the configured read command. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-11sf: Add QUAD_IO_FAST read supportJagannadha Sutradharudu Teki
This patch adds support QUAD_IO_FAST read command. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-11sf: Separate the flash params tableJagannadha Sutradharudu Teki
Moved the flash params table from sf_probe.c and placed on to sf_params.c, hence flash params file will alter based on new addons. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-11sf: Add quad read/write commands supportJagannadha Sutradharudu Teki
This patch add quad commands support like - QUAD_PAGE_PROGRAM => for write program - QUAD_OUTPUT_FAST ->> for read program Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
2014-01-11sf: Add extended read commands supportJagannadha Sutradharudu Teki
Current sf uses FAST_READ command, this patch adds support to use the different/extended read command. This implementation will determine the fastest command by taking the supported commands from the flash and the controller, controller is always been a priority. Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
generated by cgit v1.2.3-70-g09d2 (git 2.51.2) at 2025-10-30 02:37:37 +0000