diff options
Diffstat (limited to 'tools/updater/flash.c')
| -rw-r--r-- | tools/updater/flash.c | 184 |
1 files changed, 184 insertions, 0 deletions
diff --git a/tools/updater/flash.c b/tools/updater/flash.c new file mode 100644 index 000000000..d2e11d212 --- /dev/null +++ b/tools/updater/flash.c @@ -0,0 +1,184 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <flash.h> + +extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ + +/*----------------------------------------------------------------------- + * Functions + */ + +/*----------------------------------------------------------------------- + * Set protection status for monitor sectors + * + * The monitor is always located in the _first_ Flash bank. + * If necessary you have to map the second bank at lower addresses. + */ +void +flash_protect (int flag, ulong from, ulong to, flash_info_t *info) +{ + ulong b_end = info->start[0] + info->size - 1; /* bank end address */ + short s_end = info->sector_count - 1; /* index of last sector */ + int i; + + /* Do nothing if input data is bad. */ + if (info->sector_count == 0 || info->size == 0 || to < from) { + return; + } + + /* There is nothing to do if we have no data about the flash + * or the protect range and flash range don't overlap. + */ + if (info->flash_id == FLASH_UNKNOWN || + to < info->start[0] || from > b_end) { + return; + } + + for (i=0; i<info->sector_count; ++i) { + ulong end; /* last address in current sect */ + + end = (i == s_end) ? b_end : info->start[i + 1] - 1; + + /* Update protection if any part of the sector + * is in the specified range. + */ + if (from <= end && to >= info->start[i]) { + if (flag & FLAG_PROTECT_CLEAR) { +#if defined(CFG_FLASH_PROTECTION) + flash_real_protect(info, i, 0); +#else + info->protect[i] = 0; +#endif /* CFG_FLASH_PROTECTION */ + } + else if (flag & FLAG_PROTECT_SET) { +#if defined(CFG_FLASH_PROTECTION) + flash_real_protect(info, i, 1); +#else + info->protect[i] = 1; +#endif /* CFG_FLASH_PROTECTION */ + } + } + } +} + +/*----------------------------------------------------------------------- + */ + +flash_info_t * +addr2info (ulong addr) +{ +#ifndef CONFIG_SPD823TS + flash_info_t *info; + int i; + + for (i=0, info=&flash_info[0]; i<CFG_MAX_FLASH_BANKS; ++i, ++info) { + if (info->flash_id != FLASH_UNKNOWN && + addr >= info->start[0] && + /* WARNING - The '- 1' is needed if the flash + * is at the end of the address space, since + * info->start[0] + info->size wraps back to 0. + * Please don't change this unless you understand this. + */ + addr <= info->start[0] + info->size - 1) { + return (info); + } + } +#endif /* CONFIG_SPD823TS */ + + return (NULL); +} + +/*----------------------------------------------------------------------- + * Copy memory to flash. + * Make sure all target addresses are within Flash bounds, + * and no protected sectors are hit. + * Returns: + * ERR_OK 0 - OK + * ERR_TIMOUT 1 - write timeout + * ERR_NOT_ERASED 2 - Flash not erased + * ERR_PROTECTED 4 - target range includes protected sectors + * ERR_INVAL 8 - target address not in Flash memory + * ERR_ALIGN 16 - target address not aligned on boundary + * (only some targets require alignment) + */ +int +flash_write (uchar *src, ulong addr, ulong cnt) +{ +#ifdef CONFIG_SPD823TS + return (ERR_TIMOUT); /* any other error codes are possible as well */ +#else + int i; + ulong end = addr + cnt - 1; + flash_info_t *info_first = addr2info (addr); + flash_info_t *info_last = addr2info (end ); + flash_info_t *info; + int j; + + if (cnt == 0) { + return (ERR_OK); + } + + if (!info_first || !info_last) { + return (ERR_INVAL); + } + + for (info = info_first; info <= info_last; ++info) { + ulong b_end = info->start[0] + info->size; /* bank end addr */ + short s_end = info->sector_count - 1; + for (i=0; i<info->sector_count; ++i) { + ulong e_addr = (i == s_end) ? b_end : info->start[i + 1]; + + if ((end >= info->start[i]) && (addr < e_addr) && + (info->protect[i] != 0) ) { + return (ERR_PROTECTED); + } + } + } + + mon_printf("\rWriting "); + for (j=0; j<20; j++) mon_putc(177); + mon_printf("\rWriting "); + + /* finally write data to flash */ + for (info = info_first; info <= info_last && cnt>0; ++info) { + ulong len; + + len = info->start[0] + info->size - addr; + if (len > cnt) + len = cnt; + + if ((i = write_buff(info, src, addr, len)) != 0) { + return (i); + } + cnt -= len; + addr += len; + src += len; + } + return (ERR_OK); +#endif /* CONFIG_SPD823TS */ +} + +/*----------------------------------------------------------------------- + */ |