diff options
Diffstat (limited to 'drivers/usb/host/ehci-fsl.c')
| -rw-r--r-- | drivers/usb/host/ehci-fsl.c | 53 |
1 files changed, 18 insertions, 35 deletions
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 39ef4354e..bf148c4e2 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -1,4 +1,6 @@ /* + * (C) Copyright 2009 Freescale Semiconductor, Inc. + * * (C) Copyright 2008, Excito Elektronik i Sk=E5ne AB * * Author: Tor Krill tor@excito.com @@ -22,12 +24,10 @@ #include <common.h> #include <pci.h> #include <usb.h> -#include <mpc83xx.h> #include <asm/io.h> -#include <asm/bitops.h> +#include <usb/ehci-fsl.h> #include "ehci.h" -#include <usb/ehci-fsl.h> #include "ehci-core.h" /* @@ -38,50 +38,33 @@ */ int ehci_hcd_init(void) { - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - uint32_t addr, temp; + struct usb_ehci *ehci; - addr = (uint32_t)&(im->usb[0]); - hccr = (struct ehci_hccr *)(addr + FSL_SKIP_PCI); + ehci = (struct usb_ehci *)CONFIG_SYS_MPC8xxx_USB_ADDR; + hccr = (struct ehci_hccr *)((uint32_t)ehci->caplength); hcor = (struct ehci_hcor *)((uint32_t) hccr + HC_LENGTH(ehci_readl(&hccr->cr_capbase))); - /* Configure clock */ - clrsetbits_be32(&(im->clk.sccr), MPC83XX_SCCR_USB_MASK, - MPC83XX_SCCR_USB_DRCM_11); - - /* Confgure interface. */ - temp = in_be32((void *)(addr + FSL_SOC_USB_CTRL)); - out_be32((void *)(addr + FSL_SOC_USB_CTRL), temp - | REFSEL_16MHZ | UTMI_PHY_EN); - - /* Wait for clock to stabilize */ - do { - temp = in_be32((void *)(addr + FSL_SOC_USB_CTRL)); - udelay(1000); - } while (!(temp & PHY_CLK_VALID)); - /* Set to Host mode */ - temp = in_le32((void *)(addr + FSL_SOC_USB_USBMODE)); - out_le32((void *)(addr + FSL_SOC_USB_USBMODE), temp | CM_HOST); + setbits_le32((void *)ehci->usbmode, CM_HOST); - out_be32((void *)(addr + FSL_SOC_USB_SNOOP1), SNOOP_SIZE_2GB); - out_be32((void *)(addr + FSL_SOC_USB_SNOOP2), - 0x80000000 | SNOOP_SIZE_2GB); + out_be32((void *)ehci->snoop1, SNOOP_SIZE_2GB); + out_be32((void *)ehci->snoop2, 0x80000000 | SNOOP_SIZE_2GB); /* Init phy */ - /* TODO: handle different phys? */ - out_le32(&(hcor->or_portsc[0]), PORT_PTS_UTMI); + if (!strcmp(getenv("usb_phy_type"), "utmi")) + out_le32(&(hcor->or_portsc[0]), PORT_PTS_UTMI); + else + out_le32(&(hcor->or_portsc[0]), PORT_PTS_ULPI); /* Enable interface. */ - temp = in_be32((void *)(addr + FSL_SOC_USB_CTRL)); - out_be32((void *)(addr + FSL_SOC_USB_CTRL), temp | USB_EN); + setbits_be32((void *)ehci->control, USB_EN); - out_be32((void *)(addr + FSL_SOC_USB_PRICTRL), 0x0000000c); - out_be32((void *)(addr + FSL_SOC_USB_AGECNTTHRSH), 0x00000040); - out_be32((void *)(addr + FSL_SOC_USB_SICTRL), 0x00000001); + out_be32((void *)ehci->prictrl, 0x0000000c); + out_be32((void *)ehci->age_cnt_limit, 0x00000040); + out_be32((void *)ehci->sictrl, 0x00000001); - temp = in_le32((void *)(addr + FSL_SOC_USB_USBMODE)); + in_le32((void *)ehci->usbmode); return 0; } |