diff options
Diffstat (limited to 'drivers/spi/tegra_spi.c')
| -rw-r--r-- | drivers/spi/tegra_spi.c | 45 |
1 files changed, 43 insertions, 2 deletions
diff --git a/drivers/spi/tegra_spi.c b/drivers/spi/tegra_spi.c index 9bb34e293..ce19095af 100644 --- a/drivers/spi/tegra_spi.c +++ b/drivers/spi/tegra_spi.c @@ -32,6 +32,9 @@ #include <asm/arch-tegra/clk_rst.h> #include <asm/arch-tegra/tegra_spi.h> #include <spi.h> +#include <fdtdec.h> + +DECLARE_GLOBAL_DATA_PTR; #if defined(CONFIG_SPI_CORRUPTS_UART) #define corrupt_delay() udelay(CONFIG_SPI_CORRUPTS_UART_DLY); @@ -44,6 +47,7 @@ struct tegra_spi_slave { struct spi_tegra *regs; unsigned int freq; unsigned int mode; + int periph_id; }; static inline struct tegra_spi_slave *to_tegra_spi(struct spi_slave *slave) @@ -84,8 +88,45 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, } spi->slave.bus = bus; spi->slave.cs = cs; - spi->freq = max_hz; +#ifdef CONFIG_OF_CONTROL + int node = fdtdec_next_compatible(gd->fdt_blob, 0, + COMPAT_NVIDIA_TEGRA20_SFLASH); + if (node < 0) { + debug("%s: cannot locate sflash node\n", __func__); + return NULL; + } + if (!fdtdec_get_is_enabled(gd->fdt_blob, node)) { + debug("%s: sflash is disabled\n", __func__); + return NULL; + } + spi->regs = (struct spi_tegra *)fdtdec_get_addr(gd->fdt_blob, + node, "reg"); + if ((fdt_addr_t)spi->regs == FDT_ADDR_T_NONE) { + debug("%s: no sflash register found\n", __func__); + return NULL; + } + spi->freq = fdtdec_get_int(gd->fdt_blob, node, "spi-max-frequency", 0); + if (!spi->freq) { + debug("%s: no sflash max frequency found\n", __func__); + return NULL; + } + spi->periph_id = clock_decode_periph_id(gd->fdt_blob, node); + if (spi->periph_id == PERIPH_ID_NONE) { + debug("%s: could not decode periph id\n", __func__); + return NULL; + } +#else spi->regs = (struct spi_tegra *)NV_PA_SPI_BASE; + spi->freq = TEGRA_SPI_MAX_FREQ; + spi->periph_id = PERIPH_ID_SPI1; +#endif + if (max_hz < spi->freq) { + debug("%s: limiting frequency from %u to %u\n", __func__, + spi->freq, max_hz); + spi->freq = max_hz; + } + debug("%s: controller initialized at %p, freq = %u, periph_id = %d\n", + __func__, spi->regs, spi->freq, spi->periph_id); spi->mode = mode; return &spi->slave; @@ -110,7 +151,7 @@ int spi_claim_bus(struct spi_slave *slave) u32 reg; /* Change SPI clock to correct frequency, PLLP_OUT0 source */ - clock_start_periph_pll(PERIPH_ID_SPI1, CLOCK_ID_PERIPH, spi->freq); + clock_start_periph_pll(spi->periph_id, CLOCK_ID_PERIPH, spi->freq); /* Clear stale status here */ reg = SPI_STAT_RDY | SPI_STAT_RXF_FLUSH | SPI_STAT_TXF_FLUSH | \ |