diff options
Diffstat (limited to 'drivers/net/designware.c')
| -rw-r--r-- | drivers/net/designware.c | 54 |
1 files changed, 27 insertions, 27 deletions
diff --git a/drivers/net/designware.c b/drivers/net/designware.c index 2f923f26f..3f5eeb73c 100644 --- a/drivers/net/designware.c +++ b/drivers/net/designware.c @@ -318,19 +318,19 @@ static int find_phy(struct eth_device *dev) u16 ctrl, oldctrl; do { - eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl); - oldctrl = ctrl & PHY_BMCR_AUTON; + eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl); + oldctrl = ctrl & BMCR_ANENABLE; - ctrl ^= PHY_BMCR_AUTON; - eth_mdio_write(dev, phy_addr, PHY_BMCR, ctrl); - eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl); - ctrl &= PHY_BMCR_AUTON; + ctrl ^= BMCR_ANENABLE; + eth_mdio_write(dev, phy_addr, MII_BMCR, ctrl); + eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl); + ctrl &= BMCR_ANENABLE; if (ctrl == oldctrl) { phy_addr++; } else { - ctrl ^= PHY_BMCR_AUTON; - eth_mdio_write(dev, phy_addr, PHY_BMCR, ctrl); + ctrl ^= BMCR_ANENABLE; + eth_mdio_write(dev, phy_addr, MII_BMCR, ctrl); return phy_addr; } @@ -347,10 +347,10 @@ static int dw_reset_phy(struct eth_device *dev) int timeout = CONFIG_PHYRESET_TIMEOUT; u32 phy_addr = priv->address; - eth_mdio_write(dev, phy_addr, PHY_BMCR, PHY_BMCR_RESET); + eth_mdio_write(dev, phy_addr, MII_BMCR, BMCR_RESET); do { - eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl); - if (!(ctrl & PHY_BMCR_RESET)) + eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl); + if (!(ctrl & BMCR_RESET)) break; udelay(1000); } while (timeout--); @@ -386,33 +386,33 @@ static int configure_phy(struct eth_device *dev) return -1; #if defined(CONFIG_DW_AUTONEG) - bmcr = PHY_BMCR_AUTON | PHY_BMCR_RST_NEG | PHY_BMCR_100MB | \ - PHY_BMCR_DPLX | PHY_BMCR_1000_MBPS; + bmcr = BMCR_ANENABLE | BMCR_ANRESTART | BMCR_SPEED100 | \ + BMCR_FULLDPLX | BMCR_SPEED1000; #else - bmcr = PHY_BMCR_100MB | PHY_BMCR_DPLX; + bmcr = BMCR_SPEED100 | BMCR_FULLDPLX; #if defined(CONFIG_DW_SPEED10M) - bmcr &= ~PHY_BMCR_100MB; + bmcr &= ~BMCR_SPEED100; #endif #if defined(CONFIG_DW_DUPLEXHALF) - bmcr &= ~PHY_BMCR_DPLX; + bmcr &= ~BMCR_FULLDPLX; #endif #endif - if (eth_mdio_write(dev, phy_addr, PHY_BMCR, bmcr) < 0) + if (eth_mdio_write(dev, phy_addr, MII_BMCR, bmcr) < 0) return -1; /* Read the phy status register and populate priv structure */ #if defined(CONFIG_DW_AUTONEG) timeout = CONFIG_AUTONEG_TIMEOUT; do { - eth_mdio_read(dev, phy_addr, PHY_BMSR, &bmsr); - if (bmsr & PHY_BMSR_AUTN_COMP) + eth_mdio_read(dev, phy_addr, MII_BMSR, &bmsr); + if (bmsr & BMSR_ANEGCOMPLETE) break; udelay(1000); } while (timeout--); - eth_mdio_read(dev, phy_addr, PHY_ANLPAR, &anlpar); - eth_mdio_read(dev, phy_addr, PHY_1000BTSR, &btsr); + eth_mdio_read(dev, phy_addr, MII_LPA, &anlpar); + eth_mdio_read(dev, phy_addr, MII_STAT1000, &btsr); if (btsr & (PHY_1000BTSR_1000FD | PHY_1000BTSR_1000HD)) { priv->speed = SPEED_1000M; @@ -421,28 +421,28 @@ static int configure_phy(struct eth_device *dev) else priv->duplex = HALF_DUPLEX; } else { - if (anlpar & PHY_ANLPAR_100) + if (anlpar & LPA_100) priv->speed = SPEED_100M; else priv->speed = SPEED_10M; - if (anlpar & (PHY_ANLPAR_10FD | PHY_ANLPAR_TXFD)) + if (anlpar & (LPA_10FULL | LPA_100FULL)) priv->duplex = FULL_DUPLEX; else priv->duplex = HALF_DUPLEX; } #else - if (eth_mdio_read(dev, phy_addr, PHY_BMCR, &ctrl) < 0) + if (eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl) < 0) return -1; - if (ctrl & PHY_BMCR_DPLX) + if (ctrl & BMCR_FULLDPLX) priv->duplex = FULL_DUPLEX; else priv->duplex = HALF_DUPLEX; - if (ctrl & PHY_BMCR_1000_MBPS) + if (ctrl & BMCR_SPEED1000) priv->speed = SPEED_1000M; - else if (ctrl & PHY_BMCR_100_MBPS) + else if (ctrl & BMCR_SPEED100) priv->speed = SPEED_100M; else priv->speed = SPEED_10M; |