diff options
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/tegra_mmc.c | 179 | 
1 files changed, 121 insertions, 58 deletions
| diff --git a/drivers/mmc/tegra_mmc.c b/drivers/mmc/tegra_mmc.c index 72586193c..455a690b7 100644 --- a/drivers/mmc/tegra_mmc.c +++ b/drivers/mmc/tegra_mmc.c @@ -2,7 +2,7 @@   * (C) Copyright 2009 SAMSUNG Electronics   * Minkyu Kang <mk7.kang@samsung.com>   * Jaehoon Chung <jh80.chung@samsung.com> - * Portions Copyright 2011-2012 NVIDIA Corporation + * Portions Copyright 2011-2013 NVIDIA Corporation   *   * This program is free software; you can redistribute it and/or modify   * it under the terms of the GNU General Public License as published by @@ -21,6 +21,7 @@  #include <bouncebuf.h>  #include <common.h> +#include <fdtdec.h>  #include <asm/gpio.h>  #include <asm/io.h>  #include <asm/arch/clock.h> @@ -28,44 +29,14 @@  #include <asm/arch-tegra/tegra_mmc.h>  #include <mmc.h> -/* support 4 mmc hosts */ -struct mmc mmc_dev[4]; -struct mmc_host mmc_host[4]; +DECLARE_GLOBAL_DATA_PTR; +struct mmc mmc_dev[MAX_HOSTS]; +struct mmc_host mmc_host[MAX_HOSTS]; -/** - * Get the host address and peripheral ID for a device. Devices are numbered - * from 0 to 3. - * - * @param host		Structure to fill in (base, reg, mmc_id) - * @param dev_index	Device index (0-3) - */ -static void tegra_get_setup(struct mmc_host *host, int dev_index) -{ -	debug("tegra_get_setup: dev_index = %d\n", dev_index); - -	switch (dev_index) { -	case 1: -		host->base = TEGRA_SDMMC3_BASE; -		host->mmc_id = PERIPH_ID_SDMMC3; -		break; -	case 2: -		host->base = TEGRA_SDMMC2_BASE; -		host->mmc_id = PERIPH_ID_SDMMC2; -		break; -	case 3: -		host->base = TEGRA_SDMMC1_BASE; -		host->mmc_id = PERIPH_ID_SDMMC1; -		break; -	case 0: -	default: -		host->base = TEGRA_SDMMC4_BASE; -		host->mmc_id = PERIPH_ID_SDMMC4; -		break; -	} - -	host->reg = (struct tegra_mmc *)host->base; -} +#ifndef CONFIG_OF_CONTROL +#error "Please enable device tree support to use this driver" +#endif  static void mmc_prepare_data(struct mmc_host *host, struct mmc_data *data,  				struct bounce_buffer *bbstate) @@ -518,41 +489,43 @@ int tegra_mmc_getcd(struct mmc *mmc)  	debug("tegra_mmc_getcd called\n"); -	if (host->cd_gpio >= 0) -		return !gpio_get_value(host->cd_gpio); +	if (fdt_gpio_isvalid(&host->cd_gpio)) +		return fdtdec_get_gpio(&host->cd_gpio);  	return 1;  } -int tegra_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio) +static int do_mmc_init(int dev_index)  {  	struct mmc_host *host;  	char gpusage[12]; /* "SD/MMCn PWR" or "SD/MMCn CD" */  	struct mmc *mmc; -	debug(" tegra_mmc_init: index %d, bus width %d " -		"pwr_gpio %d cd_gpio %d\n", -		dev_index, bus_width, pwr_gpio, cd_gpio); - +	/* DT should have been read & host config filled in */  	host = &mmc_host[dev_index]; +	if (!host->enabled) +		return -1; -	host->clock = 0; -	host->pwr_gpio = pwr_gpio; -	host->cd_gpio = cd_gpio; -	tegra_get_setup(host, dev_index); +	debug(" do_mmc_init: index %d, bus width %d " +		"pwr_gpio %d cd_gpio %d\n", +		dev_index, host->width, +		host->pwr_gpio.gpio, host->cd_gpio.gpio); +	host->clock = 0;  	clock_start_periph_pll(host->mmc_id, CLOCK_ID_PERIPH, 20000000); -	if (host->pwr_gpio >= 0) { +	if (fdt_gpio_isvalid(&host->pwr_gpio)) {  		sprintf(gpusage, "SD/MMC%d PWR", dev_index); -		gpio_request(host->pwr_gpio, gpusage); -		gpio_direction_output(host->pwr_gpio, 1); +		gpio_request(host->pwr_gpio.gpio, gpusage); +		gpio_direction_output(host->pwr_gpio.gpio, 1); +		debug(" Power GPIO name = %s\n", host->pwr_gpio.name);  	} -	if (host->cd_gpio >= 0) { +	if (fdt_gpio_isvalid(&host->cd_gpio)) {  		sprintf(gpusage, "SD/MMC%d CD", dev_index); -		gpio_request(host->cd_gpio, gpusage); -		gpio_direction_input(host->cd_gpio); +		gpio_request(host->cd_gpio.gpio, gpusage); +		gpio_direction_input(host->cd_gpio.gpio); +		debug(" CD GPIO name = %s\n", host->cd_gpio.name);  	}  	mmc = &mmc_dev[dev_index]; @@ -567,9 +540,9 @@ int tegra_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio)  	mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;  	mmc->host_caps = 0; -	if (bus_width == 8) +	if (host->width == 8)  		mmc->host_caps |= MMC_MODE_8BIT; -	if (bus_width >= 4) +	if (host->width >= 4)  		mmc->host_caps |= MMC_MODE_4BIT;  	mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_HC; @@ -578,8 +551,6 @@ int tegra_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio)  	 *  low-speed SDIO card frequency (actually 400KHz)  	 * max freq is highest HS eMMC clock as per the SD/MMC spec  	 *  (actually 52MHz) -	 * Both of these are the closest equivalents w/216MHz source -	 *  clock and Tegra SDMMC divisors.  	 */  	mmc->f_min = 375000;  	mmc->f_max = 48000000; @@ -588,3 +559,95 @@ int tegra_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio)  	return 0;  } + +/** + * Get the host address and peripheral ID for a node. + * + * @param blob		fdt blob + * @param node		Device index (0-3) + * @param host		Structure to fill in (reg, width, mmc_id) + */ +static int mmc_get_config(const void *blob, int node, struct mmc_host *host) +{ +	debug("%s: node = %d\n", __func__, node); + +	host->enabled = fdtdec_get_is_enabled(blob, node); + +	host->reg = (struct tegra_mmc *)fdtdec_get_addr(blob, node, "reg"); +	if ((fdt_addr_t)host->reg == FDT_ADDR_T_NONE) { +		debug("%s: no sdmmc base reg info found\n", __func__); +		return -FDT_ERR_NOTFOUND; +	} + +	host->mmc_id = clock_decode_periph_id(blob, node); +	if (host->mmc_id == PERIPH_ID_NONE) { +		debug("%s: could not decode periph id\n", __func__); +		return -FDT_ERR_NOTFOUND; +	} + +	/* +	 * NOTE: mmc->bus_width is determined by mmc.c dynamically. +	 * TBD: Override it with this value? +	 */ +	host->width = fdtdec_get_int(blob, node, "bus-width", 0); +	if (!host->width) +		debug("%s: no sdmmc width found\n", __func__); + +	/* These GPIOs are optional */ +	fdtdec_decode_gpio(blob, node, "cd-gpios", &host->cd_gpio); +	fdtdec_decode_gpio(blob, node, "wp-gpios", &host->wp_gpio); +	fdtdec_decode_gpio(blob, node, "power-gpios", &host->pwr_gpio); + +	debug("%s: found controller at %p, width = %d, periph_id = %d\n", +		__func__, host->reg, host->width, host->mmc_id); +	return 0; +} + +/* + * Process a list of nodes, adding them to our list of SDMMC ports. + * + * @param blob          fdt blob + * @param node_list     list of nodes to process (any <=0 are ignored) + * @param count         number of nodes to process + * @return 0 if ok, -1 on error + */ +static int process_nodes(const void *blob, int node_list[], int count) +{ +	struct mmc_host *host; +	int i, node; + +	debug("%s: count = %d\n", __func__, count); + +	/* build mmc_host[] for each controller */ +	for (i = 0; i < count; i++) { +		node = node_list[i]; +		if (node <= 0) +			continue; + +		host = &mmc_host[i]; +		host->id = i; + +		if (mmc_get_config(blob, node, host)) { +			printf("%s: failed to decode dev %d\n",	__func__, i); +			return -1; +		} +		do_mmc_init(i); +	} +	return 0; +} + +void tegra_mmc_init(void) +{ +	int node_list[MAX_HOSTS], count; +	const void *blob = gd->fdt_blob; +	debug("%s entry\n", __func__); + +	count = fdtdec_find_aliases_for_id(blob, "sdhci", +		COMPAT_NVIDIA_TEGRA20_SDMMC, node_list, MAX_HOSTS); +	debug("%s: count of sdhci nodes is %d\n", __func__, count); + +	if (process_nodes(blob, node_list, count)) { +		printf("%s: Error processing mmc node(s)!\n", __func__); +		return; +	} +} |