diff options
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/Makefile | 1 | ||||
| -rw-r--r-- | drivers/mmc/bcm2835_sdhci.c | 189 | ||||
| -rw-r--r-- | drivers/mmc/mmc.c | 16 | ||||
| -rw-r--r-- | drivers/mmc/omap_hsmmc.c | 8 | ||||
| -rw-r--r-- | drivers/mmc/sdhci.c | 8 | 
5 files changed, 213 insertions, 9 deletions
| diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 65791aa21..1d6faa2a9 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -43,6 +43,7 @@ COBJS-$(CONFIG_MXS_MMC) += mxsmmc.o  COBJS-$(CONFIG_OMAP_HSMMC) += omap_hsmmc.o  COBJS-$(CONFIG_PXA_MMC_GENERIC) += pxa_mmc_gen.o  COBJS-$(CONFIG_SDHCI) += sdhci.o +COBJS-$(CONFIG_BCM2835_SDHCI) += bcm2835_sdhci.o  COBJS-$(CONFIG_S5P_SDHCI) += s5p_sdhci.o  COBJS-$(CONFIG_SH_MMCIF) += sh_mmcif.o  COBJS-$(CONFIG_TEGRA_MMC) += tegra_mmc.o diff --git a/drivers/mmc/bcm2835_sdhci.c b/drivers/mmc/bcm2835_sdhci.c new file mode 100644 index 000000000..b0afc3c9c --- /dev/null +++ b/drivers/mmc/bcm2835_sdhci.c @@ -0,0 +1,189 @@ +/* + * This code was extracted from: + * git://github.com/gonzoua/u-boot-pi.git master + * and hence presumably (C) 2012 Oleksandr Tymoshenko + * + * Tweaks for U-Boot upstreaming + * (C) 2012 Stephen Warren + * + * Portions (e.g. read/write macros, concepts for back-to-back register write + * timing workarounds) obviously extracted from the Linux kernel at: + * https://github.com/raspberrypi/linux.git rpi-3.6.y + * + * The Linux kernel code has the following (c) and license, which is hence + * propagated to Oleksandr's tree and here: + * + * Support for SDHCI device on 2835 + * Based on sdhci-bcm2708.c (c) 2010 Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* Supports: + * SDHCI platform device - Arasan SD controller in BCM2708 + * + * Inspired by sdhci-pci.c, by Pierre Ossman + */ + +#include <common.h> +#include <malloc.h> +#include <sdhci.h> + +/* 400KHz is max freq for card ID etc. Use that as min */ +#define MIN_FREQ 400000 + +struct bcm2835_sdhci_host { +	struct sdhci_host host; +	uint twoticks_delay; +	ulong last_write; +}; + +static inline struct bcm2835_sdhci_host *to_bcm(struct sdhci_host *host) +{ +	return (struct bcm2835_sdhci_host *)host; +} + +static inline void bcm2835_sdhci_raw_writel(struct sdhci_host *host, u32 val, +						int reg) +{ +	struct bcm2835_sdhci_host *bcm_host = to_bcm(host); + +	/* +	 * The Arasan has a bugette whereby it may lose the content of +	 * successive writes to registers that are within two SD-card clock +	 * cycles of each other (a clock domain crossing problem). +	 * It seems, however, that the data register does not have this problem. +	 * (Which is just as well - otherwise we'd have to nobble the DMA engine +	 * too) +	 */ +	while (get_timer(bcm_host->last_write) < bcm_host->twoticks_delay) +		; + +	writel(val, host->ioaddr + reg); +	bcm_host->last_write = get_timer(0); +} + +static inline u32 bcm2835_sdhci_raw_readl(struct sdhci_host *host, int reg) +{ +	return readl(host->ioaddr + reg); +} + +static void bcm2835_sdhci_writel(struct sdhci_host *host, u32 val, int reg) +{ +	bcm2835_sdhci_raw_writel(host, val, reg); +} + +static void bcm2835_sdhci_writew(struct sdhci_host *host, u16 val, int reg) +{ +	static u32 shadow; +	u32 oldval = (reg == SDHCI_COMMAND) ? shadow : +		bcm2835_sdhci_raw_readl(host, reg & ~3); +	u32 word_num = (reg >> 1) & 1; +	u32 word_shift = word_num * 16; +	u32 mask = 0xffff << word_shift; +	u32 newval = (oldval & ~mask) | (val << word_shift); + +	if (reg == SDHCI_TRANSFER_MODE) +		shadow = newval; +	else +		bcm2835_sdhci_raw_writel(host, newval, reg & ~3); +} + +static void bcm2835_sdhci_writeb(struct sdhci_host *host, u8 val, int reg) +{ +	u32 oldval = bcm2835_sdhci_raw_readl(host, reg & ~3); +	u32 byte_num = reg & 3; +	u32 byte_shift = byte_num * 8; +	u32 mask = 0xff << byte_shift; +	u32 newval = (oldval & ~mask) | (val << byte_shift); + +	bcm2835_sdhci_raw_writel(host, newval, reg & ~3); +} + +static u32 bcm2835_sdhci_readl(struct sdhci_host *host, int reg) +{ +	u32 val = bcm2835_sdhci_raw_readl(host, reg); + +	return val; +} + +static u16 bcm2835_sdhci_readw(struct sdhci_host *host, int reg) +{ +	u32 val = bcm2835_sdhci_raw_readl(host, (reg & ~3)); +	u32 word_num = (reg >> 1) & 1; +	u32 word_shift = word_num * 16; +	u32 word = (val >> word_shift) & 0xffff; + +	return word; +} + +static u8 bcm2835_sdhci_readb(struct sdhci_host *host, int reg) +{ +	u32 val = bcm2835_sdhci_raw_readl(host, (reg & ~3)); +	u32 byte_num = reg & 3; +	u32 byte_shift = byte_num * 8; +	u32 byte = (val >> byte_shift) & 0xff; + +	return byte; +} + +static const struct sdhci_ops bcm2835_ops = { +	.write_l = bcm2835_sdhci_writel, +	.write_w = bcm2835_sdhci_writew, +	.write_b = bcm2835_sdhci_writeb, +	.read_l = bcm2835_sdhci_readl, +	.read_w = bcm2835_sdhci_readw, +	.read_b = bcm2835_sdhci_readb, +}; + +int bcm2835_sdhci_init(u32 regbase, u32 emmc_freq) +{ +	struct bcm2835_sdhci_host *bcm_host; +	struct sdhci_host *host; + +	bcm_host = malloc(sizeof(*bcm_host)); +	if (!bcm_host) { +		printf("sdhci_host malloc fail!\n"); +		return 1; +	} + +	/* +	 * See the comments in bcm2835_sdhci_raw_writel(). +	 * +	 * This should probably be dynamically calculated based on the actual +	 * frequency. However, this is the longest we'll have to wait, and +	 * doesn't seem to slow access down too much, so the added complexity +	 * doesn't seem worth it for now. +	 * +	 * 1/MIN_FREQ is (max) time per tick of eMMC clock. +	 * 2/MIN_FREQ is time for two ticks. +	 * Multiply by 1000000 to get uS per two ticks. +	 * +1 for hack rounding. +	 */ +	bcm_host->twoticks_delay = ((2 * 1000000) / MIN_FREQ) + 1; +	bcm_host->last_write = 0; + +	host = &bcm_host->host; +	host->name = "bcm2835_sdhci"; +	host->ioaddr = (void *)regbase; +	host->quirks = SDHCI_QUIRK_BROKEN_VOLTAGE | SDHCI_QUIRK_BROKEN_R1B | +		SDHCI_QUIRK_WAIT_SEND_CMD; +	host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; +	host->ops = &bcm2835_ops; + +	host->version = sdhci_readw(host, SDHCI_HOST_VERSION); +	add_sdhci(host, emmc_freq, MIN_FREQ); + +	return 0; +} diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 7b5fdd9f6..d732581eb 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -51,8 +51,12 @@ int mmc_getwp(struct mmc *mmc)  	wp = board_mmc_getwp(mmc); -	if ((wp < 0) && mmc->getwp) -		wp = mmc->getwp(mmc); +	if (wp < 0) { +		if (mmc->getwp) +			wp = mmc->getwp(mmc); +		else +			wp = 0; +	}  	return wp;  } @@ -692,8 +696,12 @@ int mmc_getcd(struct mmc *mmc)  	cd = board_mmc_getcd(mmc); -	if ((cd < 0) && mmc->getcd) -		cd = mmc->getcd(mmc); +	if (cd < 0) { +		if (mmc->getcd) +			cd = mmc->getcd(mmc); +		else +			cd = 1; +	}  	return cd;  } diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c index 67cfcc24d..166744c32 100644 --- a/drivers/mmc/omap_hsmmc.c +++ b/drivers/mmc/omap_hsmmc.c @@ -593,8 +593,6 @@ int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio,  	mmc->send_cmd = mmc_send_cmd;  	mmc->set_ios = mmc_set_ios;  	mmc->init = mmc_init_setup; -	mmc->getcd = omap_mmc_getcd; -	mmc->getwp = omap_mmc_getwp;  	mmc->priv = priv_data;  	switch (dev_index) { @@ -616,7 +614,13 @@ int omap_mmc_init(int dev_index, uint host_caps_mask, uint f_max, int cd_gpio,  		return 1;  	}  	priv_data->cd_gpio = omap_mmc_setup_gpio_in(cd_gpio, "mmc_cd"); +	if (priv_data->cd_gpio != -1) +		mmc->getcd = omap_mmc_getcd; +  	priv_data->wp_gpio = omap_mmc_setup_gpio_in(wp_gpio, "mmc_wp"); +	if (priv_data->wp_gpio != -1) +		mmc->getwp = omap_mmc_getwp; +  	mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;  	mmc->host_caps = (MMC_MODE_4BIT | MMC_MODE_HS_52MHz | MMC_MODE_HS |  				MMC_MODE_HC) & ~host_caps_mask; diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index daca0ea4f..1eaea04ad 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -412,9 +412,11 @@ int sdhci_init(struct mmc *mmc)  			status = sdhci_readl(host, SDHCI_PRESENT_STATE);  	} -	/* Eable all state */ -	sdhci_writel(host, SDHCI_INT_ALL_MASK, SDHCI_INT_ENABLE); -	sdhci_writel(host, SDHCI_INT_ALL_MASK, SDHCI_SIGNAL_ENABLE); +	/* Enable only interrupts served by the SD controller */ +	sdhci_writel(host, SDHCI_INT_DATA_MASK | SDHCI_INT_CMD_MASK +		     , SDHCI_INT_ENABLE); +	/* Mask all sdhci interrupt sources */ +	sdhci_writel(host, 0x0, SDHCI_SIGNAL_ENABLE);  	return 0;  } |