diff options
Diffstat (limited to 'drivers/i2c/soft_i2c.c')
| -rw-r--r-- | drivers/i2c/soft_i2c.c | 131 |
1 files changed, 72 insertions, 59 deletions
diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c index 23db2ee8f..a27de5a7e 100644 --- a/drivers/i2c/soft_i2c.c +++ b/drivers/i2c/soft_i2c.c @@ -28,6 +28,7 @@ #include <common.h> #ifdef CONFIG_MPC8260 /* only valid for MPC8260 */ #include <ioports.h> +#include <asm/io.h> #endif #ifdef CONFIG_AT91RM9200 /* need this for the at91rm9200 */ #include <asm/io.h> @@ -39,6 +40,9 @@ #ifdef CONFIG_LPC2292 #include <asm/arch/hardware.h> #endif +#ifdef CONFIG_MPC866 /* only valid for MPC866 */ +#include <asm/io.h> +#endif #include <i2c.h> /* #define DEBUG_I2C */ @@ -68,17 +72,23 @@ DECLARE_GLOBAL_DATA_PTR; #define PRINTD(fmt,args...) #endif +#if defined(CONFIG_I2C_MULTI_BUS) +static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = 0; +#endif /* CONFIG_I2C_MULTI_BUS */ + /*----------------------------------------------------------------------- * Local functions */ +#if !defined(CONFIG_SYS_I2C_INIT_BOARD) static void send_reset (void); +#endif static void send_start (void); static void send_stop (void); static void send_ack (int); static int write_byte (uchar byte); static uchar read_byte (int); - +#if !defined(CONFIG_SYS_I2C_INIT_BOARD) /*----------------------------------------------------------------------- * Send a reset sequence consisting of 9 clocks with the data signal high * to clock any confused device back into an idle state. Also send a @@ -86,12 +96,7 @@ static uchar read_byte (int); */ static void send_reset(void) { -#ifdef CONFIG_MPC8260 - volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT); -#endif -#ifdef CONFIG_8xx - volatile immap_t *immr = (immap_t *)CFG_IMMR; -#endif + I2C_SOFT_DECLARATIONS /* intentional without ';' */ int j; I2C_SCL(1); @@ -111,18 +116,14 @@ static void send_reset(void) send_stop(); I2C_TRISTATE; } +#endif /*----------------------------------------------------------------------- * START: High -> Low on SDA while SCL is High */ static void send_start(void) { -#ifdef CONFIG_MPC8260 - volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT); -#endif -#ifdef CONFIG_8xx - volatile immap_t *immr = (immap_t *)CFG_IMMR; -#endif + I2C_SOFT_DECLARATIONS /* intentional without ';' */ I2C_DELAY; I2C_SDA(1); @@ -139,12 +140,7 @@ static void send_start(void) */ static void send_stop(void) { -#ifdef CONFIG_MPC8260 - volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT); -#endif -#ifdef CONFIG_8xx - volatile immap_t *immr = (immap_t *)CFG_IMMR; -#endif + I2C_SOFT_DECLARATIONS /* intentional without ';' */ I2C_SCL(0); I2C_DELAY; @@ -164,12 +160,7 @@ static void send_stop(void) */ static void send_ack(int ack) { -#ifdef CONFIG_MPC8260 - volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT); -#endif -#ifdef CONFIG_8xx - volatile immap_t *immr = (immap_t *)CFG_IMMR; -#endif + I2C_SOFT_DECLARATIONS /* intentional without ';' */ I2C_SCL(0); I2C_DELAY; @@ -189,12 +180,7 @@ static void send_ack(int ack) */ static int write_byte(uchar data) { -#ifdef CONFIG_MPC8260 - volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT); -#endif -#ifdef CONFIG_8xx - volatile immap_t *immr = (immap_t *)CFG_IMMR; -#endif + I2C_SOFT_DECLARATIONS /* intentional without ';' */ int j; int nack; @@ -230,6 +216,51 @@ static int write_byte(uchar data) return(nack); /* not a nack is an ack */ } +#if defined(CONFIG_I2C_MULTI_BUS) +/* + * Functions for multiple I2C bus handling + */ +unsigned int i2c_get_bus_num(void) +{ + return i2c_bus_num; +} + +int i2c_set_bus_num(unsigned int bus) +{ +#if defined(CONFIG_I2C_MUX) + if (bus < CONFIG_SYS_MAX_I2C_BUS) { + i2c_bus_num = bus; + } else { + int ret; + + ret = i2x_mux_select_mux(bus); + if (ret == 0) + i2c_bus_num = bus; + else + return ret; + } +#else + if (bus >= CONFIG_SYS_MAX_I2C_BUS) + return -1; + i2c_bus_num = bus; +#endif + return 0; +} + +/* TODO: add 100/400k switching */ +unsigned int i2c_get_bus_speed(void) +{ + return CONFIG_SYS_I2C_SPEED; +} + +int i2c_set_bus_speed(unsigned int speed) +{ + if (speed != CONFIG_SYS_I2C_SPEED) + return -1; + + return 0; +} +#endif /*----------------------------------------------------------------------- * if ack == I2C_ACK, ACK the byte so can continue reading, else @@ -237,12 +268,7 @@ static int write_byte(uchar data) */ static uchar read_byte(int ack) { -#ifdef CONFIG_MPC8260 - volatile ioport_t *iop = ioport_addr((immap_t *)CFG_IMMR, I2C_PORT); -#endif -#ifdef CONFIG_8xx - volatile immap_t *immr = (immap_t *)CFG_IMMR; -#endif + I2C_SOFT_DECLARATIONS /* intentional without ';' */ int data; int j; @@ -275,6 +301,12 @@ static uchar read_byte(int ack) */ void i2c_init (int speed, int slaveaddr) { +#if defined(CONFIG_SYS_I2C_INIT_BOARD) + /* call board specific i2c bus reset routine before accessing the */ + /* environment, which might be in a chip on that bus. For details */ + /* about this problem see doc/I2C_Edge_Conditions. */ + i2c_init_board(); +#else /* * WARNING: Do NOT save speed in a static variable: if the * I2C routines are called before RAM is initialized (to read @@ -282,6 +314,7 @@ void i2c_init (int speed, int slaveaddr) * system will crash. */ send_reset (); +#endif } /*----------------------------------------------------------------------- @@ -313,7 +346,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) PRINTD("i2c_read: chip %02X addr %02X alen %d buffer %p len %d\n", chip, addr, alen, buffer, len); -#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW +#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW /* * EEPROM chips that implement "address overflow" are ones * like Catalyst 24WC04/08/16 which has 9/10/11 bits of @@ -325,7 +358,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) * still be one byte because the extra address bits are * hidden in the chip address. */ - chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW); + chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW); PRINTD("i2c_read: fix addr_overflow: chip %02X addr %02X\n", chip, addr); @@ -401,23 +434,3 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) send_stop(); return(failures); } - -/*----------------------------------------------------------------------- - * Read a register - */ -uchar i2c_reg_read(uchar i2c_addr, uchar reg) -{ - uchar buf; - - i2c_read(i2c_addr, reg, 1, &buf, 1); - - return(buf); -} - -/*----------------------------------------------------------------------- - * Write a register - */ -void i2c_reg_write(uchar i2c_addr, uchar reg, uchar val) -{ - i2c_write(i2c_addr, reg, 1, &val, 1); -} |