diff options
Diffstat (limited to 'doc/README.at91')
| -rw-r--r-- | doc/README.at91 | 23 |
1 files changed, 6 insertions, 17 deletions
diff --git a/doc/README.at91 b/doc/README.at91 index b51df00da..b3d110b38 100644 --- a/doc/README.at91 +++ b/doc/README.at91 @@ -1,7 +1,5 @@ Atmel AT91 Evaluation kits -http://atmel.com/dyn/products/tools.asp?family_id=605#1443 - I. Board mapping & boot media ------------------------------------------------------------------------------ AT91SAM9260EK, AT91SAM9G20EK & AT91SAM9XEEK @@ -10,7 +8,7 @@ AT91SAM9260EK, AT91SAM9G20EK & AT91SAM9XEEK Memory map 0x20000000 - 23FFFFFF SDRAM (64 MB) 0xC0000000 - Cxxxxxxx Atmel Dataflash card (J13) - 0xD0000000 - Dxxxxxxx Soldered Atmel Dataflash + 0xD0000000 - D07FFFFF Soldered Atmel Dataflash (AT45DB642) Environment variables @@ -20,7 +18,6 @@ Environment variables - Nand flash. You can choose your storage location at config step (here for at91sam9260ek) : - make at91sam9260ek_config - use data flash (spi cs1) (default) make at91sam9260ek_nandflash_config - use nand flash make at91sam9260ek_dataflash_cs0_config - use data flash (spi cs0) make at91sam9260ek_dataflash_cs1_config - use data flash (spi cs1) @@ -32,7 +29,7 @@ AT91SAM9261EK, AT91SAM9G10EK Memory map 0x20000000 - 23FFFFFF SDRAM (64 MB) - 0xC0000000 - Cxxxxxxx Soldered Atmel Dataflash + 0xC0000000 - C07FFFFF Soldered Atmel Dataflash (AT45DB642) 0xD0000000 - Dxxxxxxx Atmel Dataflash card (J22) Environment variables @@ -43,7 +40,6 @@ Environment variables - Nand flash. You can choose your storage location at config step (here for at91sam9260ek) : - make at91sam9261ek_config - use data flash (spi cs0) (default) make at91sam9261ek_nandflash_config - use nand flash make at91sam9261ek_dataflash_cs0_config - use data flash (spi cs0) make at91sam9261ek_dataflash_cs3_config - use data flash (spi cs3) @@ -65,7 +61,6 @@ Environment variables - Nor flash (not populate by default) You can choose your storage location at config step (here for at91sam9260ek) : - make at91sam9263ek_config - use data flash (spi cs0) (default) make at91sam9263ek_nandflash_config - use nand flash make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0) make at91sam9263ek_norflash_config - use nor flash @@ -79,19 +74,15 @@ AT91SAM9M10G45EK ------------------------------------------------------------------------------ Memory map - 0x20000000 - 23FFFFFF SDRAM (64 MB) - 0xC0000000 - Cxxxxxxx Atmel Dataflash card (J12) + 0x70000000 - 77FFFFFF SDRAM (128 MB) Environment variables U-Boot environment variables can be stored at different places: - - Dataflash on SPI chip select 0 (dataflash card) - Nand flash. You can choose your storage location at config step (here for at91sam9m10g45ek) : - make at91sam9m10g45ek_config - use data flash (spi cs0) (default) make at91sam9m10g45ek_nandflash_config - use nand flash - make at91sam9m10g45ek_dataflash_cs0_config - use data flash (spi cs0) ------------------------------------------------------------------------------ @@ -100,7 +91,7 @@ AT91SAM9RLEK Memory map 0x20000000 - 23FFFFFF SDRAM (64 MB) - 0xC0000000 - Cxxxxxxx Soldered Atmel Dataflash + 0xC0000000 - C07FFFFF Soldered Atmel Dataflash (AT45DB642) Environment variables @@ -108,10 +99,8 @@ Environment variables - Dataflash on SPI chip select 0 - Nand flash. - You can choose your storage location at config step (here for at91sam9260ek) : - make at91sam9263ek_config - use data flash (spi cs0) (default) - make at91sam9263ek_nandflash_config - use nand flash - make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0) + You can choose your storage location at config step (here for at91sam9rlek) : + make at91sam9rlek_nandflash_config - use nand flash II. Watchdog support |