diff options
Diffstat (limited to 'cpu/pxa/serial.c')
| -rw-r--r-- | cpu/pxa/serial.c | 166 |
1 files changed, 166 insertions, 0 deletions
diff --git a/cpu/pxa/serial.c b/cpu/pxa/serial.c new file mode 100644 index 000000000..c9d5f70bc --- /dev/null +++ b/cpu/pxa/serial.c @@ -0,0 +1,166 @@ +/* + * (C) Copyright 2002 + * Wolfgang Denk, DENX Software Engineering, <wd@denx.de> + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Alex Zuepke <azu@sysgo.de> + * + * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <common.h> +#include <asm/arch/pxa-regs.h> + +void serial_setbrg (void) +{ + DECLARE_GLOBAL_DATA_PTR; + + unsigned int quot = 0; + + if (gd->baudrate == 1200) + quot = 192; + else if (gd->baudrate == 9600) + quot = 96; + else if (gd->baudrate == 19200) + quot = 48; + else if (gd->baudrate == 38400) + quot = 24; + else if (gd->baudrate == 57600) + quot = 16; + else if (gd->baudrate == 115200) + quot = 8; + else + hang (); + +#ifdef CONFIG_FFUART + + CKEN |= CKEN6_FFUART; + + FFIER = 0; /* Disable for now */ + FFFCR = 0; /* No fifos enabled */ + + /* set baud rate */ + FFLCR = LCR_WLS0 | LCR_WLS1 | LCR_DLAB; + FFDLL = quot & 0xff; + FFDLH = quot >> 8; + FFLCR = LCR_WLS0 | LCR_WLS1; + + FFIER = IER_UUE; /* Enable FFUART */ + +#elif defined(CONFIG_BTUART) + CKEN |= CKEN7_BTUART; + + BTIER = 0; + BTFCR = 0; + + /* set baud rate */ + BTLCR = LCR_DLAB; + BTDLL = quot & 0xff; + BTDLH = quot >> 8; + BTLCR = LCR_WLS0 | LCR_WLS1; + + BTIER = IER_UUE; /* Enable BFUART */ + +#elif defined(CONFIG_STUART) +#error "Bad: not implemented yet!" +#else +#error "Bad: you didn't configured serial ..." +#endif +} + + +/* + * Initialise the serial port with the given baudrate. The settings + * are always 8 data bits, no parity, 1 stop bit, no start bits. + * + */ +int serial_init (void) +{ + serial_setbrg (); + + return (0); +} + + +/* + * Output a single byte to the serial port. + */ +void serial_putc (const char c) +{ +#ifdef CONFIG_FFUART + /* wait for room in the tx FIFO on FFUART */ + while ((FFLSR & LSR_TEMT) == 0); + + FFTHR = c; +#elif defined(CONFIG_BTUART) + while ((BTLSR & LSR_TEMT ) == 0 ); + BTTHR = c; +#elif defined(CONFIG_STUART) +#endif + + /* If \n, also do \r */ + if (c == '\n') + serial_putc ('\r'); +} + +/* + * Read a single byte from the serial port. Returns 1 on success, 0 + * otherwise. When the function is succesfull, the character read is + * written into its argument c. + */ +int serial_tstc (void) +{ +#ifdef CONFIG_FFUART + return FFLSR & LSR_DR; +#elif defined(CONFIG_BTUART) + return BTLSR & LSR_DR; +#elif defined(CONFIG_STUART) +#endif +} + +/* + * Read a single byte from the serial port. Returns 1 on success, 0 + * otherwise. When the function is succesfull, the character read is + * written into its argument c. + */ +int serial_getc (void) +{ +#ifdef CONFIG_FFUART + while (!(FFLSR & LSR_DR)); + + return (char) FFRBR & 0xff; +#elif defined(CONFIG_BTUART) + while (!(BTLSR & LSR_DR)); + + return (char) BTRBR & 0xff; +#elif defined(CONFIG_STUART) +#endif +} + +void +serial_puts (const char *s) +{ + while (*s) { + serial_putc (*s++); + } +} |