diff options
Diffstat (limited to 'cpu/arm925t/interrupts.c')
| -rw-r--r-- | cpu/arm925t/interrupts.c | 301 | 
1 files changed, 301 insertions, 0 deletions
| diff --git a/cpu/arm925t/interrupts.c b/cpu/arm925t/interrupts.c new file mode 100644 index 000000000..ed8a1c771 --- /dev/null +++ b/cpu/arm925t/interrupts.c @@ -0,0 +1,301 @@ +/* + * (C) Copyright 2003 + * Texas Instruments, <www.ti.com> + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Alex Zuepke <azu@sysgo.de> + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <arm925t.h> +#include <configs/omap1510.h> + +#include <asm/proc-armv/ptrace.h> + +extern void reset_cpu(ulong addr); +#define TIMER_LOAD_VAL 0xffffffff + +/* macro to read the 32 bit timer */ +#define READ_TIMER (*(volatile ulong *)(CFG_TIMERBASE+8)) + +#ifdef CONFIG_USE_IRQ +/* enable IRQ interrupts */ +void enable_interrupts (void) +{ +	unsigned long temp; +	__asm__ __volatile__("mrs %0, cpsr\n" +			     "bic %0, %0, #0x80\n" +			     "msr cpsr_c, %0" +			     : "=r" (temp) +			     : +			     : "memory"); +} + + +/* + * disable IRQ/FIQ interrupts + * returns true if interrupts had been enabled before we disabled them + */ +int disable_interrupts (void) +{ +	unsigned long old,temp; +	__asm__ __volatile__("mrs %0, cpsr\n" +			     "orr %1, %0, #0xc0\n" +			     "msr cpsr_c, %1" +			     : "=r" (old), "=r" (temp) +			     : +			     : "memory"); +	return (old & 0x80) == 0; +} +#else +void enable_interrupts (void) +{ +	return; +} +int disable_interrupts (void) +{ +	return 0; +} +#endif + + + +void bad_mode (void) +{ +	panic ("Resetting CPU ...\n"); +	reset_cpu (0); +} + +void show_regs (struct pt_regs *regs) +{ +	unsigned long flags; +	const char *processor_modes[] = { +	"USER_26",	"FIQ_26",	"IRQ_26",	"SVC_26", +	"UK4_26",	"UK5_26",	"UK6_26",	"UK7_26", +	"UK8_26",	"UK9_26",	"UK10_26",	"UK11_26", +	"UK12_26",	"UK13_26",	"UK14_26",	"UK15_26", +	"USER_32",	"FIQ_32",	"IRQ_32",	"SVC_32", +	"UK4_32",	"UK5_32",	"UK6_32",	"ABT_32", +	"UK8_32",	"UK9_32",	"UK10_32",	"UND_32", +	"UK12_32",	"UK13_32",	"UK14_32",	"SYS_32", +	}; + +	flags = condition_codes (regs); + +	printf ("pc : [<%08lx>]    lr : [<%08lx>]\n" +		"sp : %08lx  ip : %08lx  fp : %08lx\n", +		instruction_pointer (regs), +		regs->ARM_lr, regs->ARM_sp, regs->ARM_ip, regs->ARM_fp); +	printf ("r10: %08lx  r9 : %08lx  r8 : %08lx\n", +		regs->ARM_r10, regs->ARM_r9, regs->ARM_r8); +	printf ("r7 : %08lx  r6 : %08lx  r5 : %08lx  r4 : %08lx\n", +		regs->ARM_r7, regs->ARM_r6, regs->ARM_r5, regs->ARM_r4); +	printf ("r3 : %08lx  r2 : %08lx  r1 : %08lx  r0 : %08lx\n", +		regs->ARM_r3, regs->ARM_r2, regs->ARM_r1, regs->ARM_r0); +	printf ("Flags: %c%c%c%c", +		flags & CC_N_BIT ? 'N' : 'n', +		flags & CC_Z_BIT ? 'Z' : 'z', +		flags & CC_C_BIT ? 'C' : 'c', flags & CC_V_BIT ? 'V' : 'v'); +	printf ("  IRQs %s  FIQs %s  Mode %s%s\n", +		interrupts_enabled (regs) ? "on" : "off", +		fast_interrupts_enabled (regs) ? "on" : "off", +		processor_modes[processor_mode (regs)], +		thumb_mode (regs) ? " (T)" : ""); +} + +void do_undefined_instruction (struct pt_regs *pt_regs) +{ +	printf ("undefined instruction\n"); +	show_regs (pt_regs); +	bad_mode (); +} + +void do_software_interrupt (struct pt_regs *pt_regs) +{ +	printf ("software interrupt\n"); +	show_regs (pt_regs); +	bad_mode (); +} + +void do_prefetch_abort (struct pt_regs *pt_regs) +{ +	printf ("prefetch abort\n"); +	show_regs (pt_regs); +	bad_mode (); +} + +void do_data_abort (struct pt_regs *pt_regs) +{ +	printf ("data abort\n"); +	show_regs (pt_regs); +	bad_mode (); +} + +void do_not_used (struct pt_regs *pt_regs) +{ +	printf ("not used\n"); +	show_regs (pt_regs); +	bad_mode (); +} + +void do_fiq (struct pt_regs *pt_regs) +{ +	printf ("fast interrupt request\n"); +	show_regs (pt_regs); +	bad_mode (); +} + +void do_irq (struct pt_regs *pt_regs) +{ +	printf ("interrupt request\n"); +	show_regs (pt_regs); +	bad_mode (); +} + +static ulong timestamp; +static ulong lastdec; + +/* nothing really to do with interrupts, just starts up a counter. */ +int interrupt_init (void) +{ +	int32_t val; + +	*((int32_t *) (CFG_TIMERBASE + LOAD_TIM)) = TIMER_LOAD_VAL; +	val = MPUTIM_ST | MPUTIM_AR | MPUTIM_CLOCK_ENABLE | (CFG_PVT << MPUTIM_PTV_BIT); +	*((int32_t *) (CFG_TIMERBASE + CNTL_TIMER)) = val; +	return (0); +} + +/* + * timer without interrupts + */ + +void reset_timer (void) +{ +	reset_timer_masked (); +} + +ulong get_timer (ulong base) +{ +	return get_timer_masked () - base; +} + +void set_timer (ulong t) +{ +	timestamp = t; +} + +/* very rough timer... */ +void udelay (unsigned long usec) +{ +#ifdef CONFIG_INNOVATOROMAP1510 +#define LOOPS_PER_MSEC 60		/* tuned on omap1510 */ +	volatile int i, time_remaining = LOOPS_PER_MSEC * usec; + +	for (i = time_remaining; i > 0; i--) { +	} +#else + +	ulong tmo; + +	tmo = usec / 1000; +	tmo *= CFG_HZ; +	tmo /= 1000; + +	tmo += get_timer (0); + +	while (get_timer_masked () < tmo) +		/*NOP*/; +#endif +} + +void reset_timer_masked (void) +{ +	/* reset time */ +	lastdec = READ_TIMER; +	timestamp = 0; +} + +ulong get_timer_masked (void) +{ +	ulong now = READ_TIMER;           /* current tick value */ + +	if (lastdec >= now) {             /* did I roll (rem decrementer) */ +		/* normal mode */ +		timestamp += lastdec - now;   /* record amount of time since last check */ +	} else { +		/* we have an overflow ... */ +		timestamp += lastdec + TIMER_LOAD_VAL - now; +	} +	lastdec = now; + +	return timestamp; +} + +void udelay_masked (unsigned long usec) +{ +#ifdef CONFIG_INNOVATOROMAP1510 +	#define LOOPS_PER_MSEC 60 /* tuned on omap1510 */ +	volatile int i, time_remaining = LOOPS_PER_MSEC*usec; +    for (i=time_remaining; i>0; i--) { } +#else + +	ulong tmo; + +	tmo = usec / 1000; +	tmo *= CFG_HZ; +	tmo /= 1000; + +	reset_timer_masked (); + +	while (get_timer_masked () < tmo) +		/*NOP*/; +#endif +} + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On ARM it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ +	return get_timer(0); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk (void) +{	/* poor timer, may need to improve especiall for bootp. */ +	ulong tbclk; + +	tbclk = CFG_HZ; +	return tbclk; +} |