diff options
Diffstat (limited to 'board/ttcontrol/vision2/vision2.c')
| -rw-r--r-- | board/ttcontrol/vision2/vision2.c | 71 |
1 files changed, 27 insertions, 44 deletions
diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c index 565c4d05b..17a25587d 100644 --- a/board/ttcontrol/vision2/vision2.c +++ b/board/ttcontrol/vision2/vision2.c @@ -29,7 +29,7 @@ #include <asm/arch/mx5x_pins.h> #include <asm/arch/crm_regs.h> #include <asm/arch/iomux.h> -#include <mxc_gpio.h> +#include <asm/gpio.h> #include <asm/arch/sys_proto.h> #include <asm/errno.h> #include <i2c.h> @@ -69,9 +69,9 @@ void hw_watchdog_reset(void) int val; /* toggle watchdog trigger pin */ - val = mxc_gpio_get(66); + val = gpio_get_value(66); val = val ? 0 : 1; - mxc_gpio_set(66, val); + gpio_set_value(66, val); } #endif @@ -233,30 +233,22 @@ static void reset_peripherals(int reset) if (reset) { /* reset_n is on NANDF_D15 */ - mxc_gpio_set(89, 0); - mxc_gpio_direction(89, MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(89, 0); #ifdef CONFIG_VISION2_HW_1_0 /* * set FEC Configuration lines * set levels of FEC config lines */ - mxc_gpio_set(75, 0); - mxc_gpio_set(74, 1); - mxc_gpio_set(95, 1); - mxc_gpio_direction(75, MXC_GPIO_DIRECTION_OUT); - mxc_gpio_direction(74, MXC_GPIO_DIRECTION_OUT); - mxc_gpio_direction(95, MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(75, 0); + gpio_direction_output(74, 1); + gpio_direction_output(95, 1); /* set direction of FEC config lines */ - mxc_gpio_set(59, 0); - mxc_gpio_set(60, 0); - mxc_gpio_set(61, 0); - mxc_gpio_set(55, 1); - mxc_gpio_direction(59, MXC_GPIO_DIRECTION_OUT); - mxc_gpio_direction(60, MXC_GPIO_DIRECTION_OUT); - mxc_gpio_direction(61, MXC_GPIO_DIRECTION_OUT); - mxc_gpio_direction(55, MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(59, 0); + gpio_direction_output(60, 0); + gpio_direction_output(61, 0); + gpio_direction_output(55, 1); /* FEC_RXD1 - sel GPIO (2-23) for configuration -> 1 */ mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT1); @@ -283,7 +275,7 @@ static void reset_peripherals(int reset) PAD_CTL_DRV_VOT_HIGH | PAD_CTL_DRV_MAX); } else { /* set FEC Control lines */ - mxc_gpio_direction(89, MXC_GPIO_DIRECTION_IN); + gpio_direction_input(89); udelay(500); #ifdef CONFIG_VISION2_HW_1_0 @@ -438,31 +430,23 @@ static void setup_gpios(void) * Set GPIO1_4 to high and output; it is used to reset * the system on reboot */ - mxc_gpio_set(4, 1); - mxc_gpio_direction(4, MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(4, 1); - mxc_gpio_set(7, 0); - mxc_gpio_direction(7, MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(7, 0); for (i = 65; i < 71; i++) { - mxc_gpio_set(i, 0); - mxc_gpio_direction(i, MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(i, 0); } - mxc_gpio_set(94, 0); - mxc_gpio_direction(94, MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(94, 0); /* Set POWER_OFF high */ - mxc_gpio_set(91, 1); - mxc_gpio_direction(91, MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(91, 1); - mxc_gpio_set(90, 0); - mxc_gpio_direction(90, MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(90, 0); - mxc_gpio_set(122, 0); - mxc_gpio_direction(122, MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(122, 0); - mxc_gpio_set(121, 1); - mxc_gpio_direction(121, MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(121, 1); WATCHDOG_RESET(); } @@ -551,7 +535,7 @@ int get_mmc_getcd(u8 *cd, struct mmc *mmc) struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) - *cd = mxc_gpio_get(0); + *cd = gpio_get_value(0); else *cd = 0; @@ -623,8 +607,7 @@ int board_early_init_f(void) init_drive_strength(); /* Setup debug led */ - mxc_gpio_set(6, 0); - mxc_gpio_direction(6, MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(6, 0); mxc_request_iomux(MX51_PIN_GPIO1_6, IOMUX_CONFIG_ALT0); mxc_iomux_set_pad(MX51_PIN_GPIO1_6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST); @@ -644,12 +627,12 @@ int board_early_init_f(void) static void backlight(int on) { if (on) { - mxc_gpio_set(65, 1); + gpio_set_value(65, 1); udelay(10000); - mxc_gpio_set(68, 1); + gpio_set_value(68, 1); } else { - mxc_gpio_set(65, 0); - mxc_gpio_set(68, 0); + gpio_set_value(65, 0); + gpio_set_value(68, 0); } } @@ -660,7 +643,7 @@ void lcd_enable(void) mxc_request_iomux(MX51_PIN_DI1_PIN2, IOMUX_CONFIG_ALT0); mxc_request_iomux(MX51_PIN_DI1_PIN3, IOMUX_CONFIG_ALT0); - mxc_gpio_set(2, 1); + gpio_set_value(2, 1); mxc_request_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT0); ret = mx51_fb_init(&nec_nl6448bc26_09c); |