diff options
Diffstat (limited to 'board/prodrive/common/fpga.c')
| -rw-r--r-- | board/prodrive/common/fpga.c | 183 |
1 files changed, 183 insertions, 0 deletions
diff --git a/board/prodrive/common/fpga.c b/board/prodrive/common/fpga.c new file mode 100644 index 000000000..f9412a21e --- /dev/null +++ b/board/prodrive/common/fpga.c @@ -0,0 +1,183 @@ +/* + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * (C) Copyright 2001-2004 + * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com + * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/processor.h> +#include <command.h> + +/* ------------------------------------------------------------------------- */ + +#ifdef FPGA_DEBUG +#define DBG(x...) printf(x) +#else +#define DBG(x...) +#endif /* DEBUG */ + +#define FPGA_PRG CFG_FPGA_PRG /* FPGA program pin (cpu output)*/ +#define FPGA_CLK CFG_FPGA_CLK /* FPGA clk pin (cpu output) */ +#define FPGA_DATA CFG_FPGA_DATA /* FPGA data pin (cpu output) */ +#define FPGA_DONE CFG_FPGA_DONE /* FPGA done pin (cpu input) */ +#define FPGA_INIT CFG_FPGA_INIT /* FPGA init pin (cpu input) */ + +#define ERROR_FPGA_PRG_INIT_LOW -1 /* Timeout after PRG* asserted */ +#define ERROR_FPGA_PRG_INIT_HIGH -2 /* Timeout after PRG* deasserted */ +#define ERROR_FPGA_PRG_DONE -3 /* Timeout after programming */ + +#ifndef OLD_VAL +# define OLD_VAL 0 +#endif + +#if 0 /* test-only */ +#define FPGA_WRITE_1 { \ + SET_FPGA(OLD_VAL | FPGA_PRG | 0 | FPGA_DATA); /* set clock to 0 */ \ + SET_FPGA(OLD_VAL | FPGA_PRG | 0 | FPGA_DATA); /* set data to 1 */ \ + SET_FPGA(OLD_VAL | FPGA_PRG | FPGA_CLK | FPGA_DATA); /* set clock to 1 */ \ + SET_FPGA(OLD_VAL | FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1 */ + +#define FPGA_WRITE_0 { \ + SET_FPGA(OLD_VAL | FPGA_PRG | 0 | FPGA_DATA); /* set clock to 0 */ \ + SET_FPGA(OLD_VAL | FPGA_PRG | 0 | 0 ); /* set data to 0 */ \ + SET_FPGA(OLD_VAL | FPGA_PRG | FPGA_CLK | 0 ); /* set clock to 1 */ \ + SET_FPGA(OLD_VAL | FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1 */ +#else +#define FPGA_WRITE_1 { \ + SET_FPGA(OLD_VAL | FPGA_PRG | 0 | FPGA_DATA); /* set data to 1 */ \ + SET_FPGA(OLD_VAL | FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1 */ + +#define FPGA_WRITE_0 { \ + SET_FPGA(OLD_VAL | FPGA_PRG | 0 | 0 ); /* set data to 0 */ \ + SET_FPGA(OLD_VAL | FPGA_PRG | FPGA_CLK | 0 );} /* set data to 1 */ +#endif + +static int fpga_boot(unsigned char *fpgadata, int size) +{ + int i,index,len; + int count; + int j; + + /* display infos on fpgaimage */ + index = 15; + for (i=0; i<4; i++) { + len = fpgadata[index]; + DBG("FPGA: %s\n", &(fpgadata[index+1])); + index += len+3; + } + + /* search for preamble 0xFFFFFFFF */ + while (1) { + if ((fpgadata[index] == 0xff) && (fpgadata[index+1] == 0xff) && + (fpgadata[index+2] == 0xff) && (fpgadata[index+3] == 0xff)) + break; /* preamble found */ + else + index++; + } + + DBG("FPGA: configdata starts at position 0x%x\n",index); + DBG("FPGA: length of fpga-data %d\n", size-index); + + /* + * Setup port pins for fpga programming + */ + SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA); /* set pins to high */ + + DBG("%s, ",(FPGA_DONE_STATE == 0) ? "NOT DONE" : "DONE" ); + DBG("%s\n",(FPGA_INIT_STATE == 0) ? "NOT INIT" : "INIT" ); + + /* + * Init fpga by asserting and deasserting PROGRAM* + */ + SET_FPGA(0 | FPGA_CLK | FPGA_DATA); /* set prog active */ + + /* Wait for FPGA init line low */ + count = 0; + while (FPGA_INIT_STATE) { + udelay(1000); /* wait 1ms */ + /* Check for timeout - 100us max, so use 3ms */ + if (count++ > 3) { + DBG("FPGA: Booting failed!\n"); + return ERROR_FPGA_PRG_INIT_LOW; + } + } + + DBG("%s, ",(FPGA_DONE_STATE == 0) ? "NOT DONE" : "DONE" ); + DBG("%s\n",(FPGA_INIT_STATE == 0) ? "NOT INIT" : "INIT" ); + + /* deassert PROGRAM* */ + SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA); /* set prog inactive */ + + /* Wait for FPGA end of init period . */ + count = 0; + while (!(FPGA_INIT_STATE)) { + udelay(1000); /* wait 1ms */ + /* Check for timeout */ + if (count++ > 3) { + DBG("FPGA: Booting failed!\n"); + return ERROR_FPGA_PRG_INIT_HIGH; + } + } + + DBG("%s, ",(FPGA_DONE_STATE == 0) ? "NOT DONE" : "DONE" ); + DBG("%s\n",(FPGA_INIT_STATE == 0) ? "NOT INIT" : "INIT" ); + + DBG("write configuration data into fpga\n"); + /* write configuration-data into fpga... */ + + /* + * Load uncompressed image into fpga + */ + for (i=index; i<size; i++) { + for (j=0; j<8; j++) { + if ((fpgadata[i] & 0x80) == 0x80) { + FPGA_WRITE_1; + } else { + FPGA_WRITE_0; + } + fpgadata[i] <<= 1; + } + } + + DBG("%s, ",(FPGA_DONE_STATE == 0) ? "NOT DONE" : "DONE" ); + DBG("%s\n",(FPGA_INIT_STATE == 0) ? "NOT INIT" : "INIT" ); + + /* + * Check if fpga's DONE signal - correctly booted ? + */ + + /* Wait for FPGA end of programming period . */ + count = 0; + while (!(FPGA_DONE_STATE)) { + udelay(1000); /* wait 1ms */ + /* Check for timeout */ + if (count++ > 3) { + DBG("FPGA: Booting failed!\n"); + return ERROR_FPGA_PRG_DONE; + } + } + + DBG("FPGA: Booting successful!\n"); + return 0; +} |