diff options
Diffstat (limited to 'board/mpc7448hpc2/asm_init.S')
| -rw-r--r-- | board/mpc7448hpc2/asm_init.S | 1125 |
1 files changed, 544 insertions, 581 deletions
diff --git a/board/mpc7448hpc2/asm_init.S b/board/mpc7448hpc2/asm_init.S index 8c15a3d49..a7a40a134 100644 --- a/board/mpc7448hpc2/asm_init.S +++ b/board/mpc7448hpc2/asm_init.S @@ -1,10 +1,10 @@ -/***************************************************************************** +/* * (C) Copyright 2004-05; Tundra Semiconductor Corp. - * + * * Added automatic detect of SDC settings * Copyright (c) 2005 Freescale Semiconductor, Inc. * Maintainer tie-fei.zang@freescale.com - * + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of @@ -19,9 +19,9 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA - ****************************************************************************/ + */ -/*---------------------------------------------------------------------------- +/* * FILENAME: asm_init.s * * Originator: Alex Bounine @@ -29,7 +29,7 @@ * DESCRIPTION: * Initialization code for the Tundra Tsi108 bridge chip * - *---------------------------------------------------------------------------*/ + */ #include <config.h> #include <version.h> @@ -40,15 +40,15 @@ #include <tsi108.h> -/*=========================================================================== +/* * Build Configuration Options */ -/* #define DISABLE_PBM disables usage of PB Master */ -/* #define SDC_HARDCODED_INIT config SDRAM controller with hardcoded values */ -/* #define SDC_AUTOPRECH_EN enable SDRAM auto precharge */ +/* #define DISABLE_PBM disables usage of PB Master */ +/* #define SDC_HARDCODED_INIT config SDRAM controller with hardcoded values */ +/* #define SDC_AUTOPRECH_EN enable SDRAM auto precharge */ -/* =========================================================================== +/* * Hardcoded SDC settings */ @@ -56,571 +56,543 @@ /* Micron MT9HTF6472AY-40EA1 : Unbuffered, 512MB, 400, CL3, Single Rank */ -#define VAL_SD_REFRESH (0x61A) -#define VAL_SD_TIMING (0x0308336b) -#define VAL_SD_D0_CTRL (0x07100021) /* auto-precharge disabled */ -#define VAL_SD_D0_BAR (0x0FE00000) /* 512MB @ 0x00000000 */ -#define VAL_SD_D1_CTRL (0x07100021) /* auto-precharge disabled */ -#define VAL_SD_D1_BAR (0x0FE00200) /* 512MB @ 0x20000000 */ +#define VAL_SD_REFRESH (0x61A) +#define VAL_SD_TIMING (0x0308336b) +#define VAL_SD_D0_CTRL (0x07100021) /* auto-precharge disabled */ +#define VAL_SD_D0_BAR (0x0FE00000) /* 512MB @ 0x00000000 */ +#define VAL_SD_D1_CTRL (0x07100021) /* auto-precharge disabled */ +#define VAL_SD_D1_BAR (0x0FE00200) /* 512MB @ 0x20000000 */ #endif /* SDC_HARDCODED_INIT */ -/*--------------------------------------------------------------------------- +/* CPU Configuration: CPU Address and Data Parity enables. #define CPU_AP #define CPU_DP +*/ -=========================================================================== - Macros - - !!! Attention !!! Macros LOAD_PTR, LOAD_U32 and LOAD_MEM defined below are - expected to work correctly for the CSR space within 32KB range. - - LOAD_PTR and LOAD_U32 - load specified register with a 32 bit constant. - These macros are absolutely identical except their names. This difference - is provided intentionally for better readable code. - -------------------------------------------------------------------------*/ +/* + * Macros + * !!! Attention !!! Macros LOAD_PTR, LOAD_U32 and LOAD_MEM defined below are + * expected to work correctly for the CSR space within 32KB range. + * + * LOAD_PTR and LOAD_U32 - load specified register with a 32 bit constant. + * These macros are absolutely identical except their names. This difference + * is provided intentionally for better readable code. + */ #define LOAD_PTR(reg,const32) \ - addis reg,r0,const32@h; ori reg,reg,const32@l + addis reg,r0,const32@h; ori reg,reg,const32@l #define LOAD_U32(reg,const32) \ - addis reg,r0,const32@h; ori reg,reg,const32@l + addis reg,r0,const32@h; ori reg,reg,const32@l -/* LOADMEM initializes a register with the contents of a specified 32-bit memory - location, usually a CSR value.*/ +/* LOADMEM initializes a register with the contents of a specified 32-bit + * memory location, usually a CSR value. + */ #define LOAD_MEM(reg,addr32) \ - addis reg,r0,addr32@ha; lwz reg,addr32@l(reg) + addis reg,r0,addr32@ha; lwz reg,addr32@l(reg) #ifndef SDC_HARDCODED_INIT sdc_clk_sync: /* MHz: 0,0,183,100,133,167,200,233 */ - .long 0,0, 6, 10, 8, 6, 5, 4 /* nSec */ + .long 0, 0, 6, 10, 8, 6, 5, 4 /* nSec */ #endif -/*=========================================================================== - board_asm_init() - early initialization function. Coded to be portable to - dual-CPU configuration. - Checks CPU number and performs board HW initialization if called for CPU0. - - Registers used: r3,r4,r5,r6,r19,r29 -=========================================================================== - ---------------------------------------------------------------------------- - NOTE: For dual-CPU configuration only CPU0 is allowed to configure Tsi108 - and the rest of the board. Current implementation demonstrates two - possible ways to identify CPU number: - - for MPC74xx platform: uses MSSCR0[ID] bit as defined in UM. - - for PPC750FX/GX boards: uses WHO_AM_I bit reported by Tsi108. ----------------------------------------------------------------------------*/ +/* + * board_asm_init() - early initialization function. Coded to be portable to + * dual-CPU configuration. + * Checks CPU number and performs board HW initialization if called for CPU0. + * Registers used: r3,r4,r5,r6,r19,r29 + * + * NOTE: For dual-CPU configuration only CPU0 is allowed to configure Tsi108 + * and the rest of the board. Current implementation demonstrates two + * possible ways to identify CPU number: + * - for MPC74xx platform: uses MSSCR0[ID] bit as defined in UM. + * - for PPC750FX/GX boards: uses WHO_AM_I bit reported by Tsi108. + */ - .globl board_asm_init + .globl board_asm_init board_asm_init: + mflr r19 /* Save LR to be able return later. */ + bl icache_enable /* Enable icache to reduce reads from flash. */ - mflr r19 /* Save LR to be able return later. */ +/* Initialize pointer to Tsi108 register space */ - bl icache_enable /* Enable icache to reduce reads from flash. */ + LOAD_PTR(r29,CFG_TSI108_CSR_RST_BASE)/* r29 - pointer to tsi108 CSR space */ + ori r4,r29,TSI108_PB_REG_OFFSET - /* Initialize pointer to Tsi108 register space - -------------------------------------------------------------------------*/ +/* Check Processor Version Number */ - LOAD_PTR(r29,CFG_TSI108_CSR_RST_BASE)/* r29 - pointer to tsi108 CSR space */ - ori r4,r29,TSI108_PB_REG_OFFSET + mfspr r3, PVR + rlwinm r3,r3,16,16,23 /* get ((Processor Version Number) & 0xFF00) */ - /*------------------------------------------------------------------------- - Check Processor Version Number */ + cmpli 0,0,r3,0x8000 /* MPC74xx */ + bne cont_brd_init - mfspr r3, PVR - rlwinm r3,r3,16,16,23 /* get ((Processor Version Number) & 0xFF00) */ - - cmpli 0,0,r3,0x8000 /* MPC74xx */ - bne cont_brd_init - - /* ------------------------------------------ - For MPC744x/5x enable extended BATs[4-7] - Sri: Set HIGH_BAT_EN and XBSEN, and SPD =1 - to disable prefetch - */ - - mfspr r5, HID0 - oris r5, r5, 0x0080 /* Set HID0[HIGH_BAT_EN] bit #8 */ - ori r5, r5, 0x0380 /* Set SPD,XBSEN,SGE bits #22,23,24 */ - mtspr HID0, r5 - isync - sync + /* + * For MPC744x/5x enable extended BATs[4-7] + * Sri: Set HIGH_BAT_EN and XBSEN, and SPD =1 + * to disable prefetch + */ - /* Adding code to disable external interventions in MPX bus mode */ - mfspr r3, 1014 - oris r3, r3, 0x0100 /* Set the EIDIS bit in MSSCR0: bit 7 */ - mtspr 1014, r3 - isync - sync + mfspr r5, HID0 + oris r5, r5, 0x0080 /* Set HID0[HIGH_BAT_EN] bit #8 */ + ori r5, r5, 0x0380 /* Set SPD,XBSEN,SGE bits #22,23,24 */ + mtspr HID0, r5 + isync + sync - /* Sri: code to enable FP unit */ - mfmsr r3 - ori r3, r3, 0x2000 - mtmsr r3 - isync - sync + /* Adding code to disable external interventions in MPX bus mode */ + mfspr r3, 1014 + oris r3, r3, 0x0100 /* Set the EIDIS bit in MSSCR0: bit 7 */ + mtspr 1014, r3 + isync + sync -#if(1) /* def CONFIG_DUAL_CPU - ------------------------------------------------------------------------- - For MPC74xx processor, use MSSCR0[ID] bit to identify CPU number. - */ + /* Sri: code to enable FP unit */ + mfmsr r3 + ori r3, r3, 0x2000 + mtmsr r3 + isync + sync - mfspr r3,1014 /* read MSSCR0 */ - rlwinm. r3,r3,27,31,31 /* get processor ID number */ - mtspr SPRN_PIR,r3 /* Save CPU ID */ - sync - bne init_done - b do_tsi108_init + /* def CONFIG_DUAL_CPU + * For MPC74xx processor, use MSSCR0[ID] bit to identify CPU number. + */ +#if(1) + mfspr r3,1014 /* read MSSCR0 */ + rlwinm. r3,r3,27,31,31 /* get processor ID number */ + mtspr SPRN_PIR,r3 /* Save CPU ID */ + sync + bne init_done + b do_tsi108_init cont_brd_init: - /* An alternative method of checking the processor number (in addition - to configuration using MSSCR0[ID] bit on MPC74xx). - Good for IBM PPC750FX/GX. - */ - - lwz r3,PB_BUS_MS_SELECT(r4) /* read PB_ID register */ - rlwinm. r3,r3,24,31,31 /* get processor ID number */ - - bne init_done + /* An alternative method of checking the processor number (in addition + * to configuration using MSSCR0[ID] bit on MPC74xx). + * Good for IBM PPC750FX/GX. + */ + lwz r3,PB_BUS_MS_SELECT(r4) /* read PB_ID register */ + rlwinm. r3,r3,24,31,31 /* get processor ID number */ + bne init_done #else cont_brd_init: #endif /* CONFIG_DUAL_CPU */ - /* Initialize Tsi108 chip - --------------------------------------------------------------------------- - */ + /* Initialize Tsi108 chip */ do_tsi108_init: - /*-------------------------------------------------------------------------- - Adjust HLP/Flash parameters. By default after reset the HLP port is set - to support slow devices. Better performance can be achived when an optimal - parameters are used for specific EPROM device. - NOTE: This should be performed ASAP for the emulation platform because - it has 5MHz HLP clocking. - */ + /* + * Adjust HLP/Flash parameters. By default after reset the HLP port is + * set to support slow devices. Better performance can be achived when + * an optimal parameters are used for specific EPROM device. + * NOTE: This should be performed ASAP for the emulation platform + * because it has 5MHz HLP clocking. + */ #ifdef CONFIG_TSI108EMU - ori r4,r29,TSI108_HLP_REG_OFFSET - LOAD_U32(r5,0x434422c0) - stw r5,0x08(r4) /* set HLP B0_CTRL0 */ - sync - LOAD_U32(r5,0xd0012000) - stw r5,0x0c(r4) /* set HLP B0_CTRL1 */ - sync + ori r4,r29,TSI108_HLP_REG_OFFSET + LOAD_U32(r5,0x434422c0) + stw r5,0x08(r4) /* set HLP B0_CTRL0 */ + sync + LOAD_U32(r5,0xd0012000) + stw r5,0x0c(r4) /* set HLP B0_CTRL1 */ + sync #endif - /* ------------------------------------------------------------------------- - * Initialize PB interface. - */ + /* Initialize PB interface. */ - ori r4,r29,TSI108_PB_REG_OFFSET + ori r4,r29,TSI108_PB_REG_OFFSET #if (CFG_TSI108_CSR_BASE != CFG_TSI108_CSR_RST_BASE) - /* Relocate (if required) Tsi108 registers. Set new value for PB_REG_BAR: - * Note we are in the 32-bit address mode. - */ - LOAD_U32(r5,(CFG_TSI108_CSR_BASE | 0x01)) /* value for PB_REG_BAR: BA + EN*/ - stw r5,PB_REG_BAR(r4) - andis. r29,r5,0xFFFF - sync - - ori r4,r29,TSI108_PB_REG_OFFSET + /* Relocate (if required) Tsi108 registers. Set new value for + * PB_REG_BAR: + * Note we are in the 32-bit address mode. + */ + LOAD_U32(r5,(CFG_TSI108_CSR_BASE | 0x01)) /* PB_REG_BAR: BA + EN */ + stw r5,PB_REG_BAR(r4) + andis. r29,r5,0xFFFF + sync + ori r4,r29,TSI108_PB_REG_OFFSET #endif - /* Set PB Slave configuration register */ + /* Set PB Slave configuration register */ -/* LOAD_U32(r5,0x000024C7) value for PB_SCR: TEA enabled,AACK delay = 7 */ - LOAD_U32(r5,0x00002481) /* value for PB_SCR: TEA enabled,AACK delay = 1 */ - lwz r3, PB_RSR(r4) /* get PB bus mode */ - xori r3,r3,0x0001 /* mask PB_BMODE: r3 -> (0 = 60X, 1 = MPX) */ - rlwimi r5,r3,14,17,17 /* for MPX: set DTI_MODE bit */ - stw r5,PB_SCR(r4) - sync + LOAD_U32(r5,0x00002481) /* PB_SCR: TEA enabled,AACK delay = 1 */ + lwz r3, PB_RSR(r4) /* get PB bus mode */ + xori r3,r3,0x0001 /* mask PB_BMODE: r3 -> (0 = 60X, 1 = MPX) */ + rlwimi r5,r3,14,17,17 /* for MPX: set DTI_MODE bit */ + stw r5,PB_SCR(r4) + sync - /* Configure PB Arbiter */ + /* Configure PB Arbiter */ - lwz r5,PB_ARB_CTRL(r4) /* Read PB Arbiter Control Register */ - li r3, 0x00F0 /* ARB_PIPELINE_DEP mask */ + lwz r5,PB_ARB_CTRL(r4) /* Read PB Arbiter Control Register */ + li r3, 0x00F0 /* ARB_PIPELINE_DEP mask */ #ifdef DISABLE_PBM - ori r3,r3,0x1000 /* add PBM_EN to clear (enabled by default) */ + ori r3,r3,0x1000 /* add PBM_EN to clear (enabled by default) */ #endif - andc r5,r5,r3 /* Clear the masked bit fields */ -/* ori r5,r5,0x0040 Set pipeline depth 4 - ori r5,r5,0x0080 Set pipeline depth 8 - ori r5,r5,0x0020 !!!avb Testing: set pipeline depth 2 */ - ori r5,r5,0x0001 - stw r5,PB_ARB_CTRL(r4) + andc r5,r5,r3 /* Clear the masked bit fields */ + ori r5,r5,0x0001 /* Set pipeline depth */ + stw r5,PB_ARB_CTRL(r4) -#if (0) /* currently using the default settings for PBM after reset */ - LOAD_U32(r5,0x) /* value for PB_MCR */ - stw r5,PB_MCR(r4) - sync +#if (0) /* currently using the default settings for PBM after reset */ + LOAD_U32(r5,0x) /* value for PB_MCR */ + stw r5,PB_MCR(r4) + sync - LOAD_U32(r5,0x) /* value for PB_MCMD */ - stw r5,PB_MCMD(r4) - sync + LOAD_U32(r5,0x) /* value for PB_MCMD */ + stw r5,PB_MCMD(r4) + sync #endif -/* Disable or enable PVT based on processor bus frequency - 1. Read CG_PWRUP_STATUS register field bits 18,17,16 - 2. See if the value is < or > 133mhz (18:16 = 100) - 3. If > enable PVT - */ + /* Disable or enable PVT based on processor bus frequency + * 1. Read CG_PWRUP_STATUS register field bits 18,17,16 + * 2. See if the value is < or > 133mhz (18:16 = 100) + * 3. If > enable PVT + */ - LOAD_U32(r3,0xC0002234) - lwz r3,0(r3) - rlwinm r3,r3,16,29,31 + LOAD_U32(r3,0xC0002234) + lwz r3,0(r3) + rlwinm r3,r3,16,29,31 - cmpi 0,0,r3,0x0004 - bgt sdc_init + cmpi 0,0,r3,0x0004 + bgt sdc_init #ifndef CONFIG_TSI108EMU - /* FIXME: Disable PB calibration control for any real Tsi108 board */ - li r5,0x0101 /* disable calibration control */ - stw r5,PB_PVT_CTRL2(r4) - sync + /* FIXME: Disable PB calibration control for any real Tsi108 board */ + li r5,0x0101 /* disable calibration control */ + stw r5,PB_PVT_CTRL2(r4) + sync #endif -/*--------------------------------------------------------------------------- - Initialize SDRAM controller. -----------------------------------------------------------------------------*/ + /* Initialize SDRAM controller. */ sdc_init: #ifndef SDC_HARDCODED_INIT - /* get SDC clock prior doing sdram controller autoconfig */ - ori r4,r29,TSI108_CLK_REG_OFFSET /* r4 - ptr to CG registers */ - lwz r3, CG_PWRUP_STATUS(r4) /* get CG configuration */ - rlwinm r3,r3,12,29,31 /* r3 - SD clk */ - lis r5,sdc_clk_sync@h - ori r5,r5,sdc_clk_sync@l - /* Sri: At this point check if r3 = 001. If yes, - * the memory frequency should be same as the - * MPX bus frequency - */ - cmpi 0,0,r3,0x0001 - bne get_nsec - lwz r6, CG_PWRUP_STATUS(r4) - rlwinm r6,r6,16,29,31 - mr r3,r6 + /* get SDC clock prior doing sdram controller autoconfig */ + ori r4,r29,TSI108_CLK_REG_OFFSET /* r4 - ptr to CG registers */ + lwz r3, CG_PWRUP_STATUS(r4) /* get CG configuration */ + rlwinm r3,r3,12,29,31 /* r3 - SD clk */ + lis r5,sdc_clk_sync@h + ori r5,r5,sdc_clk_sync@l + /* Sri: At this point check if r3 = 001. If yes, + * the memory frequency should be same as the + * MPX bus frequency + */ + cmpi 0,0,r3,0x0001 + bne get_nsec + lwz r6, CG_PWRUP_STATUS(r4) + rlwinm r6,r6,16,29,31 + mr r3,r6 get_nsec: - rlwinm r3,r3,2,0,31 - lwzx r9,r5,r3 /* get SD clk rate in nSec */ - /* ATTN: r9 will be used by SPD routine */ + rlwinm r3,r3,2,0,31 + lwzx r9,r5,r3 /* get SD clk rate in nSec */ + /* ATTN: r9 will be used by SPD routine */ #endif /* !SDC_HARDCODED_INIT */ - ori r4,r29,TSI108_SD_REG_OFFSET /* r4 - ptr to SDRAM registers */ + ori r4,r29,TSI108_SD_REG_OFFSET /* r4 - ptr to SDRAM registers */ - /* Initialize SDRAM controller. SDRAM Size = 512MB, One DIMM. */ + /* Initialize SDRAM controller. SDRAM Size = 512MB, One DIMM. */ - LOAD_U32(r5,0x00) - stw r5,SD_INT_ENABLE(r4) /* Ensure that interrupts are disabled */ + LOAD_U32(r5,0x00) + stw r5,SD_INT_ENABLE(r4) /* Ensure that interrupts are disabled */ #ifdef ENABLE_SDRAM_ECC - li r5, 0x01 + li r5, 0x01 #endif /* ENABLE_SDRAM_ECC */ - stw r5,SD_ECC_CTRL(r4) /* Enable/Disable ECC */ - sync + stw r5,SD_ECC_CTRL(r4) /* Enable/Disable ECC */ + sync #ifdef SDC_HARDCODED_INIT /* config sdram controller with hardcoded values */ - /* First read the CG_PWRUP_STATUS register to get the - memory speed from bits 22,21,20 */ - - LOAD_U32(r3,0xC0002234) - lwz r3,0(r3) - rlwinm r3,r3,12,29,31 + /* First read the CG_PWRUP_STATUS register to get the + * memory speed from bits 22,21,20 + */ - /* Now first check for 166, then 200, or default */ + LOAD_U32(r3,0xC0002234) + lwz r3,0(r3) + rlwinm r3,r3,12,29,31 - cmpi 0,0,r3,0x0005 - bne check_for_200mhz + /* Now first check for 166, then 200, or default */ - /* set values for 166 Mhz memory speed */ + cmpi 0,0,r3,0x0005 + bne check_for_200mhz - /* Set refresh rate and timing parameters */ - LOAD_U32(r5,0x00000515) - stw r5,SD_REFRESH(r4) - LOAD_U32(r5,0x03073368) - stw r5,SD_TIMING(r4) - sync + /* set values for 166 Mhz memory speed + * Set refresh rate and timing parameters + */ + LOAD_U32(r5,0x00000515) + stw r5,SD_REFRESH(r4) + LOAD_U32(r5,0x03073368) + stw r5,SD_TIMING(r4) + sync - /* Initialize DIMM0 control and BAR registers */ - LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */ + /* Initialize DIMM0 control and BAR registers */ + LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */ #ifdef SDC_AUTOPRECH_EN - oris r5,r5,0x0001 /* set auto precharge EN bit */ + oris r5,r5,0x0001 /* set auto precharge EN bit */ #endif - stw r5,SD_D0_CTRL(r4) - LOAD_U32(r5,VAL_SD_D0_BAR) - stw r5,SD_D0_BAR(r4) - sync + stw r5,SD_D0_CTRL(r4) + LOAD_U32(r5,VAL_SD_D0_BAR) + stw r5,SD_D0_BAR(r4) + sync - /* Initialize DIMM1 control and BAR registers - * (same as dimm 0, next 512MB, disabled) - */ - LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */ + /* Initialize DIMM1 control and BAR registers + * (same as dimm 0, next 512MB, disabled) + */ + LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */ #ifdef SDC_AUTOPRECH_EN - oris r5,r5,0x0001 /* set auto precharge EN bit */ + oris r5,r5,0x0001 /* set auto precharge EN bit */ #endif - stw r5,SD_D1_CTRL(r4) - LOAD_U32(r5,VAL_SD_D1_BAR) - stw r5,SD_D1_BAR(r4) - sync + stw r5,SD_D1_CTRL(r4) + LOAD_U32(r5,VAL_SD_D1_BAR) + stw r5,SD_D1_BAR(r4) + sync - b sdc_init_done + b sdc_init_done check_for_200mhz: - cmpi 0,0,r3,0x0006 - bne set_default_values - - /* set values for 200Mhz memory speed */ + cmpi 0,0,r3,0x0006 + bne set_default_values - /* Set refresh rate and timing parameters */ - LOAD_U32(r5,0x0000061a) - stw r5,SD_REFRESH(r4) - LOAD_U32(r5,0x03083348) - stw r5,SD_TIMING(r4) - sync + /* set values for 200Mhz memory speed + * Set refresh rate and timing parameters + */ + LOAD_U32(r5,0x0000061a) + stw r5,SD_REFRESH(r4) + LOAD_U32(r5,0x03083348) + stw r5,SD_TIMING(r4) + sync - /* Initialize DIMM0 control and BAR registers */ - LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */ + /* Initialize DIMM0 control and BAR registers */ + LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */ #ifdef SDC_AUTOPRECH_EN - oris r5,r5,0x0001 /* set auto precharge EN bit */ + oris r5,r5,0x0001 /* set auto precharge EN bit */ #endif - stw r5,SD_D0_CTRL(r4) - LOAD_U32(r5,VAL_SD_D0_BAR) - stw r5,SD_D0_BAR(r4) - sync + stw r5,SD_D0_CTRL(r4) + LOAD_U32(r5,VAL_SD_D0_BAR) + stw r5,SD_D0_BAR(r4) + sync - /* Initialize DIMM1 control and BAR registers - * (same as dimm 0, next 512MB, disabled) - */ - LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */ + /* Initialize DIMM1 control and BAR registers + * (same as dimm 0, next 512MB, disabled) + */ + LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */ #ifdef SDC_AUTOPRECH_EN - oris r5,r5,0x0001 /* set auto precharge EN bit */ + oris r5,r5,0x0001 /* set auto precharge EN bit */ #endif - stw r5,SD_D1_CTRL(r4) - LOAD_U32(r5,VAL_SD_D1_BAR) - stw r5,SD_D1_BAR(r4) - sync + stw r5,SD_D1_CTRL(r4) + LOAD_U32(r5,VAL_SD_D1_BAR) + stw r5,SD_D1_BAR(r4) + sync - b sdc_init_done + b sdc_init_done set_default_values: - /* Set refresh rate and timing parameters */ - LOAD_U32(r5,VAL_SD_REFRESH) - stw r5,SD_REFRESH(r4) - LOAD_U32(r5,VAL_SD_TIMING) - stw r5,SD_TIMING(r4) - sync + /* Set refresh rate and timing parameters */ + LOAD_U32(r5,VAL_SD_REFRESH) + stw r5,SD_REFRESH(r4) + LOAD_U32(r5,VAL_SD_TIMING) + stw r5,SD_TIMING(r4) + sync - /* Initialize DIMM0 control and BAR registers */ - LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */ + /* Initialize DIMM0 control and BAR registers */ + LOAD_U32(r5,VAL_SD_D0_CTRL) /* auto-precharge disabled */ #ifdef SDC_AUTOPRECH_EN - oris r5,r5,0x0001 /* set auto precharge EN bit */ + oris r5,r5,0x0001 /* set auto precharge EN bit */ #endif - stw r5,SD_D0_CTRL(r4) - LOAD_U32(r5,VAL_SD_D0_BAR) - stw r5,SD_D0_BAR(r4) - sync + stw r5,SD_D0_CTRL(r4) + LOAD_U32(r5,VAL_SD_D0_BAR) + stw r5,SD_D0_BAR(r4) + sync - /* Initialize DIMM1 control and BAR registers - * (same as dimm 0, next 512MB, disabled) - */ - LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */ + /* Initialize DIMM1 control and BAR registers + * (same as dimm 0, next 512MB, disabled) + */ + LOAD_U32(r5,VAL_SD_D1_CTRL) /* auto-precharge disabled */ #ifdef SDC_AUTOPRECH_EN - oris r5,r5,0x0001 /* set auto precharge EN bit */ + oris r5,r5,0x0001 /* set auto precharge EN bit */ #endif - stw r5,SD_D1_CTRL(r4) - LOAD_U32(r5,VAL_SD_D1_BAR) - stw r5,SD_D1_BAR(r4) - sync - + stw r5,SD_D1_CTRL(r4) + LOAD_U32(r5,VAL_SD_D1_BAR) + stw r5,SD_D1_BAR(r4) + sync #else /* !SDC_HARDCODED_INIT */ - - bl tsi108_sdram_spd /* automatically detect SDC settings */ - + bl tsi108_sdram_spd /* automatically detect SDC settings */ #endif /* SDC_HARDCODED_INIT */ sdc_init_done: #ifdef DISABLE_PBM - LOAD_U32(r5,0x00000030) /* PB_EN + OCN_EN */ + LOAD_U32(r5,0x00000030) /* PB_EN + OCN_EN */ #else - LOAD_U32(r5,0x00000230) /* PB_EN + OCN_EN + PB/OCN=80/20 */ + LOAD_U32(r5,0x00000230) /* PB_EN + OCN_EN + PB/OCN=80/20 */ #endif /* DISABLE_PBM */ #ifdef CONFIG_TSI108EMU - oris r5,r5,0x0010 /* set EMULATION_MODE bit */ + oris r5,r5,0x0010 /* set EMULATION_MODE bit */ #endif - stw r5,SD_CTRL(r4) - eieio - sync + stw r5,SD_CTRL(r4) + eieio + sync - /* Enable SDRAM access */ + /* Enable SDRAM access */ - oris r5,r5,0x8000 /* start SDC: set SD_CTRL[ENABLE] bit */ - stw r5,SD_CTRL(r4) - sync + oris r5,r5,0x8000 /* start SDC: set SD_CTRL[ENABLE] bit */ + stw r5,SD_CTRL(r4) + sync wait_init_complete: - lwz r5,SD_STATUS(r4) - andi. r5,r5,0x0001 - beq wait_init_complete /* wait until SDRAM initialization is complete */ - -/*--------------------------------------------------------------------------- - Map SDRAM into the processor bus address space ----------------------------------------------------------------------------*/ + lwz r5,SD_STATUS(r4) + andi. r5,r5,0x0001 + /* wait until SDRAM initialization is complete */ + beq wait_init_complete - ori r4,r29,TSI108_PB_REG_OFFSET + /* Map SDRAM into the processor bus address space */ - /* Setup BARs associated with direct path PB<->SDRAM */ + ori r4,r29,TSI108_PB_REG_OFFSET - /* PB_SDRAM_BAR1: - provides a direct path to the main system memory (cacheable SDRAM) */ + /* Setup BARs associated with direct path PB<->SDRAM */ - LOAD_U32(r5, 0x00000011) /* BA=0,Size=512MB, ENable, No Addr.Translation */ - stw r5,PB_SDRAM_BAR1(r4) - sync + /* PB_SDRAM_BAR1: + * provides a direct path to the main system memory (cacheable SDRAM) + */ - /* Make sure that PB_SDRAM_BAR1 decoder is set - (to allow following immediate read from SDRAM) */ - lwz r5,PB_SDRAM_BAR1(r4) - sync + /* BA=0,Size=512MB, ENable, No Addr.Translation */ + LOAD_U32(r5, 0x00000011) + stw r5,PB_SDRAM_BAR1(r4) + sync - /* PB_SDRAM_BAR2: - provides non-cacheable alias (via the direct path) to main system memory. - Size = 512MB, ENable, Addr.Translation - ON, - BA = 0x0_40000000, TA = 0x0_00000000 */ + /* Make sure that PB_SDRAM_BAR1 decoder is set + * (to allow following immediate read from SDRAM) + */ + lwz r5,PB_SDRAM_BAR1(r4) + sync - LOAD_U32(r5, 0x40010011) - stw r5,PB_SDRAM_BAR2(r4) - sync + /* PB_SDRAM_BAR2: + * provides non-cacheable alias (via the direct path) to main + * system memory. + * Size = 512MB, ENable, Addr.Translation - ON, + * BA = 0x0_40000000, TA = 0x0_00000000 + */ - /* Make sure that PB_SDRAM_BAR2 decoder is set - (to allow following immediate read from SDRAM) */ - lwz r5,PB_SDRAM_BAR2(r4) - sync + LOAD_U32(r5, 0x40010011) + stw r5,PB_SDRAM_BAR2(r4) + sync + /* Make sure that PB_SDRAM_BAR2 decoder is set + * (to allow following immediate read from SDRAM) + */ + lwz r5,PB_SDRAM_BAR2(r4) + sync init_done: - /* All done. Restore LR and return. */ - mtlr r19 - blr + /* All done. Restore LR and return. */ + mtlr r19 + blr #if (0) -/*=========================================================================== - init_cpu1 - - This routine enables CPU1 on the dual-processor system. -===========================================================================*/ + /* + * init_cpu1 + * This routine enables CPU1 on the dual-processor system. + * Now there is only one processor in the system + */ - .global enable_cpu1 + .global enable_cpu1 enable_cpu1: - lis r3,Tsi108_Base@ha /* Get Grendel CSR Base Addr */ - addi r3,r3,Tsi108_Base@l - lwz r3,0(r3) /* R3 = CSR Base Addr */ - ori r4,r3,TSI108_PB_REG_OFFSET - lwz r3,PB_ARB_CTRL(r4) /* Read PB Arbiter Control Register */ - ori r3,r3,0x0200 /* Set M1_EN bit */ - stw r3,PB_ARB_CTRL(r4) + lis r3,Tsi108_Base@ha /* Get Grendel CSR Base Addr */ + addi r3,r3,Tsi108_Base@l + lwz r3,0(r3) /* R3 = CSR Base Addr */ + ori r4,r3,TSI108_PB_REG_OFFSET + lwz r3,PB_ARB_CTRL(r4) /* Read PB Arbiter Control Register */ + ori r3,r3,0x0200 /* Set M1_EN bit */ + stw r3,PB_ARB_CTRL(r4) - blr + blr #endif -/*=========================================================================== - enable_EI - - Enable CPU core external interrupt -===========================================================================*/ + /* + * enable_EI + * Enable CPU core external interrupt + */ - .global enable_EI + .global enable_EI enable_EI: - mfmsr r3 - ori r3,r3,0x8000 /* set EE bit */ - mtmsr r3 - blr - -/*=========================================================================== - disable_EI + mfmsr r3 + ori r3,r3,0x8000 /* set EE bit */ + mtmsr r3 + blr - Disable CPU core external interrupt -===========================================================================*/ + /* + * disable_EI + * Disable CPU core external interrupt + */ - .global disable_EI + .global disable_EI disable_EI: - mfmsr r3 - li r4,-32768 /* aka "li r4,0x8000" */ - andc r3,r3,r4 /* clear EE bit */ - mtmsr r3 - blr + mfmsr r3 + li r4,-32768 /* aka "li r4,0x8000" */ + andc r3,r3,r4 /* clear EE bit */ + mtmsr r3 + blr #ifdef ENABLE_SDRAM_ECC -/*=========================================================================== - enable_ECC - - enables SDRAM ECC -===========================================================================*/ + /* enables SDRAM ECC */ - .global enable_ECC + .global enable_ECC enable_ECC: - ori r4,r29,TSI108_SD_REG_OFFSET - lwz r3,SD_ECC_CTRL(r4) /* Read SDRAM ECC Control Register */ - ori r3,r3,0x0001 /* Set ECC_EN bit */ - stw r3,SD_ECC_CTRL(r4) - blr - -/*=========================================================================== - clear_ECC_err + ori r4,r29,TSI108_SD_REG_OFFSET + lwz r3,SD_ECC_CTRL(r4) /* Read SDRAM ECC Control Register */ + ori r3,r3,0x0001 /* Set ECC_EN bit */ + stw r3,SD_ECC_CTRL(r4) + blr - Clears all pending SDRAM ECC errors - (normally after SDRAM scrubbing/initialization) -===========================================================================*/ + /* + * clear_ECC_err + * Clears all pending SDRAM ECC errors + * (normally after SDRAM scrubbing/initialization) + */ - .global clear_ECC_err + .global clear_ECC_err clear_ECC_err: - ori r4,r29,TSI108_SD_REG_OFFSET -/* lwz r3,SD_INT_STATUS(r4) Read SDRAM ECC Control Register */ - ori r3,r0,0x0030 /* ECC_UE_INT + ECC_CE_INT bits */ - stw r3,SD_INT_STATUS(r4) - blr + ori r4,r29,TSI108_SD_REG_OFFSET + ori r3,r0,0x0030 /* ECC_UE_INT + ECC_CE_INT bits */ + stw r3,SD_INT_STATUS(r4) + blr #endif /* ENABLE_SDRAM_ECC */ #ifndef SDC_HARDCODED_INIT -/******************************************************************** - * SDRAM SPD Support - */ - + /* SDRAM SPD Support */ #define SD_I2C_CTRL1 (0x400) #define SD_I2C_CTRL2 (0x404) #define SD_I2C_RD_DATA (0x408) -#define SD_I2C_WR_DATA (0x40C) +#define SD_I2C_WR_DATA (0x40C) -/* - * SDRAM SPD Support Macros - */ + /* + * SDRAM SPD Support Macros + */ #define SPD_DIMM0 (0x00000100) -#define SPD_DIMM1 (0x00000200) /* SPD_DIMM1 was 0x00000000 */ +#define SPD_DIMM1 (0x00000200) /* SPD_DIMM1 was 0x00000000 */ #define SPD_RDIMM (0x01) #define SPD_UDIMM (0x02) @@ -651,30 +623,30 @@ clear_ECC_err: * r10 - number of DDR slot where first SPD device is detected */ -#define READ_SPD(byte_num) \ - addis r3, 0, byte_num@l;\ - or r3, r3, r10;\ - ori r3, r3, 0x0A;\ - stw r3, SD_I2C_CTRL1(r4);\ - li r3, I2C_CNTRL2_START;\ - stw r3, SD_I2C_CTRL2(r4);\ - eieio;\ - sync;\ - li r3, 0x100;\ -1: ;\ - addic. r3, r3, -1;\ - bne 1b;\ -2: ;\ - lwz r5, SD_I2C_CTRL2(r4);\ - rlwinm. r3,r5,0,23,23;\ - bne 2b;\ - rlwinm. r3,r5,0,3,3;\ - lwz r3, SD_I2C_RD_DATA(r4) +#define READ_SPD(byte_num) \ + addis r3, 0, byte_num@l; \ + or r3, r3, r10; \ + ori r3, r3, 0x0A; \ + stw r3, SD_I2C_CTRL1(r4); \ + li r3, I2C_CNTRL2_START; \ + stw r3, SD_I2C_CTRL2(r4); \ + eieio; \ + sync; \ + li r3, 0x100; \ +1:; \ + addic. r3, r3, -1; \ + bne 1b; \ +2:; \ + lwz r5, SD_I2C_CTRL2(r4); \ + rlwinm. r3,r5,0,23,23; \ + bne 2b; \ + rlwinm. r3,r5,0,3,3; \ + lwz r3,SD_I2C_RD_DATA(r4) #define SPD_MIN_RFRSH (0x80) #define SPD_MAX_RFRSH (0x85) -refresh_rates: /* in nSec */ +refresh_rates: /* in nSec */ .long 15625 /* Normal (0x80) */ .long 3900 /* Reduced 0.25x (0x81) */ .long 7800 /* Reduced 0.5x (0x82) */ @@ -682,274 +654,265 @@ refresh_rates: /* in nSec */ .long 62500 /* Extended 4x (0x84) */ .long 125000 /* Extended 8x (0x85) */ -/*=========================================================================== +/* * tsi108_sdram_spd * * Inittializes SDRAM Controller using DDR2 DIMM Serial Presence Detect data * Uses registers: r4 - SDC base address (not changed) * r9 - SDC clocking period in nSec * Changes registers: r3,r5,r6,r7,r8,r10,r11 - *==========================================================================*/ + */ tsi108_sdram_spd: - li r10,SPD_DIMM0 + li r10,SPD_DIMM0 xor r11,r11,r11 /* DIMM Base Address: starts from 0 */ do_first_dimm: - /************************************** - * Program Refresh Rate Register - */ + /* Program Refresh Rate Register */ - READ_SPD(12) /* get Refresh Rate */ - beq check_next_slot - li r5, ERR_RFRSH_RATE - cmpi 0,0,r3,SPD_MIN_RFRSH - ble spd_fail - cmpi 0,0,r3,SPD_MAX_RFRSH - bgt spd_fail - addi r3,r3,-SPD_MIN_RFRSH - rlwinm r3,r3,2,0,31 - lis r5,refresh_rates@h - ori r5,r5,refresh_rates@l - lwzx r5,r5,r3 /* get refresh rate in nSec */ - divwu r5,r5,r9 /* calculate # of SDC clocks */ - stw r5,SD_REFRESH(r4) /* Set refresh rate */ + READ_SPD(12) /* get Refresh Rate */ + beq check_next_slot + li r5, ERR_RFRSH_RATE + cmpi 0,0,r3,SPD_MIN_RFRSH + ble spd_fail + cmpi 0,0,r3,SPD_MAX_RFRSH + bgt spd_fail + addi r3,r3,-SPD_MIN_RFRSH + rlwinm r3,r3,2,0,31 + lis r5,refresh_rates@h + ori r5,r5,refresh_rates@l + lwzx r5,r5,r3 /* get refresh rate in nSec */ + divwu r5,r5,r9 /* calculate # of SDC clocks */ + stw r5,SD_REFRESH(r4) /* Set refresh rate */ sync - /************************************** - * Program SD Timing Register - */ + /* Program SD Timing Register */ - li r7, 0 /* clear r7 prior parameter collection */ + li r7, 0 /* clear r7 prior parameter collection */ - READ_SPD(20) /* get DIMM type: Registered or Unbuffered */ + READ_SPD(20) /* get DIMM type: Registered or Unbuffered */ beq spd_read_fail - li r5, ERR_DIMM_TYPE - cmpi 0,0,r3,SPD_UDIMM - beq do_cl - cmpi 0,0,r3,SPD_RDIMM - bne spd_fail - oris r7,r7,0x1000 /* set SD_TIMING[DIMM_TYPE] bit */ + li r5, ERR_DIMM_TYPE + cmpi 0,0,r3,SPD_UDIMM + beq do_cl + cmpi 0,0,r3,SPD_RDIMM + bne spd_fail + oris r7,r7,0x1000 /* set SD_TIMING[DIMM_TYPE] bit */ do_cl: - READ_SPD(18) /* Get CAS Latency */ + READ_SPD(18) /* Get CAS Latency */ beq spd_read_fail - li r5,ERR_CL_VALUE - andi. r6,r3,SPD_CAS_3 - beq cl_4 - li r6,3 - b set_cl + li r5,ERR_CL_VALUE + andi. r6,r3,SPD_CAS_3 + beq cl_4 + li r6,3 + b set_cl cl_4: - andi. r6,r3,SPD_CAS_4 - beq cl_5 - li r6,4 - b set_cl + andi. r6,r3,SPD_CAS_4 + beq cl_5 + li r6,4 + b set_cl cl_5: - andi. r6,r3,SPD_CAS_5 - beq spd_fail - li r6,5 + andi. r6,r3,SPD_CAS_5 + beq spd_fail + li r6,5 set_cl: - rlwimi r7,r6,24,5,7 + rlwimi r7,r6,24,5,7 - READ_SPD(30) /* Get tRAS */ + READ_SPD(30) /* Get tRAS */ beq spd_read_fail - divwu r6,r3,r9 - mullw r8,r6,r9 - subf. r8,r8,r3 + divwu r6,r3,r9 + mullw r8,r6,r9 + subf. r8,r8,r3 beq set_tras - addi r6,r6,1 + addi r6,r6,1 set_tras: li r5,ERR_TRAS_FAIL - cmpi 0,0,r6,0x0F /* max supported value */ - bgt spd_fail - rlwimi r7,r6,16,12,15 + cmpi 0,0,r6,0x0F /* max supported value */ + bgt spd_fail + rlwimi r7,r6,16,12,15 READ_SPD(29) /* Get tRCD */ beq spd_read_fail - rlwinm r3,r3,30,2,31/* right shift tRCD by 2 bits as per DDR2 spec */ - divwu r6,r3,r9 - mullw r8,r6,r9 - subf. r8,r8,r3 + /* right shift tRCD by 2 bits as per DDR2 spec */ + rlwinm r3,r3,30,2,31 + divwu r6,r3,r9 + mullw r8,r6,r9 + subf. r8,r8,r3 beq set_trcd - addi r6,r6,1 + addi r6,r6,1 set_trcd: - li r5,ERR_TRCD_FAIL - cmpi 0,0,r6,0x07 /* max supported value */ - bgt spd_fail - rlwimi r7,r6,12,17,19 + li r5,ERR_TRCD_FAIL + cmpi 0,0,r6,0x07 /* max supported value */ + bgt spd_fail + rlwimi r7,r6,12,17,19 READ_SPD(27) /* Get tRP value */ beq spd_read_fail - rlwinm r3,r3,30,2,31 /* right shift tRP by 2 bits as per DDR2 spec */ - divwu r6,r3,r9 - mullw r8,r6,r9 - subf. r8,r8,r3 + rlwinm r3,r3,30,2,31 /* right shift tRP by 2 bits as per DDR2 spec */ + divwu r6,r3,r9 + mullw r8,r6,r9 + subf. r8,r8,r3 beq set_trp - addi r6,r6,1 + addi r6,r6,1 set_trp: - li r5,ERR_TRP_FAIL - cmpi 0,0,r6,0x07 /* max supported value */ - bgt spd_fail - rlwimi r7,r6,8,21,23 + li r5,ERR_TRP_FAIL + cmpi 0,0,r6,0x07 /* max supported value */ + bgt spd_fail + rlwimi r7,r6,8,21,23 READ_SPD(36) /* Get tWR value */ beq spd_read_fail - rlwinm r3,r3,30,2,31 /* right shift tWR by 2 bits as per DDR2 spec */ - divwu r6,r3,r9 - mullw r8,r6,r9 - subf. r8,r8,r3 + rlwinm r3,r3,30,2,31 /* right shift tWR by 2 bits as per DDR2 spec */ + divwu r6,r3,r9 + mullw r8,r6,r9 + subf. r8,r8,r3 beq set_twr - addi r6,r6,1 + addi r6,r6,1 set_twr: - addi r6,r6,-1 /* Tsi108 SDC always gives one extra clock */ - li r5,ERR_TWR_FAIL - cmpi 0,0,r6,0x07 /* max supported value */ - bgt spd_fail - rlwimi r7,r6,5,24,26 + addi r6,r6,-1 /* Tsi108 SDC always gives one extra clock */ + li r5,ERR_TWR_FAIL + cmpi 0,0,r6,0x07 /* max supported value */ + bgt spd_fail + rlwimi r7,r6,5,24,26 READ_SPD(42) /* Get tRFC */ beq spd_read_fail - li r5, ERR_TRFC_FAIL + li r5, ERR_TRFC_FAIL /* Tsi108 spec: tRFC=(tRFC + 1)/2 */ - addi r3,r3,1 - rlwinm. r3,r3,31,1,31 /* divide by 2 */ - beq spd_fail - divwu r6,r3,r9 - mullw r8,r6,r9 - subf. r8,r8,r3 + addi r3,r3,1 + rlwinm. r3,r3,31,1,31 /* divide by 2 */ + beq spd_fail + divwu r6,r3,r9 + mullw r8,r6,r9 + subf. r8,r8,r3 beq set_trfc - addi r6,r6,1 + addi r6,r6,1 set_trfc: - cmpi 0,0,r6,0x1F /* max supported value */ - bgt spd_fail - rlwimi r7,r6,0,27,31 + cmpi 0,0,r6,0x1F /* max supported value */ + bgt spd_fail + rlwimi r7,r6,0,27,31 stw r7,SD_TIMING(r4) sync - /*===================================================================== + /* * The following two registers are set on per-DIMM basis. * The SD_REFRESH and SD_TIMING settings are common for both DIMMS - *===================================================================== */ do_each_dimm: - /***************************************** - * Program SDRAM DIMM Control Register - */ + /* Program SDRAM DIMM Control Register */ - li r7, 0 /* clear r7 prior parameter collection */ + li r7, 0 /* clear r7 prior parameter collection */ READ_SPD(13) /* Get Primary SDRAM Width */ beq spd_read_fail - cmpi 0,0,r3,4 /* Check for 4-bit SDRAM */ - beq do_nbank - oris r7,r7,0x0010 /* Set MEM_WIDTH bit */ + cmpi 0,0,r3,4 /* Check for 4-bit SDRAM */ + beq do_nbank + oris r7,r7,0x0010 /* Set MEM_WIDTH bit */ do_nbank: READ_SPD(17) /* Get Number of banks on SDRAM device */ beq spd_read_fail /* Grendel only distinguish betw. 4 or 8-bank memory parts */ - li r5,ERR_UNKNOWN_PART /* non-supported memory part */ - cmpi 0,0,r3,4 - beq do_nrank - cmpi 0,0,r3,8 - bne spd_fail - ori r7,r7,0x1000 + li r5,ERR_UNKNOWN_PART /* non-supported memory part */ + cmpi 0,0,r3,4 + beq do_nrank + cmpi 0,0,r3,8 + bne spd_fail + ori r7,r7,0x1000 do_nrank: - READ_SPD(5) /* Get # of Ranks */ + READ_SPD(5) /* Get # of Ranks */ beq spd_read_fail - li r5,ERR_NRANK_INVALID - andi. r6,r3,0x7 /* Use bits [2..0] only */ - beq do_addr_mode - cmpi 0,0,r6,1 - bgt spd_fail - rlwimi r7,r6,8,23,23 + li r5,ERR_NRANK_INVALID + andi. r6,r3,0x7 /* Use bits [2..0] only */ + beq do_addr_mode + cmpi 0,0,r6,1 + bgt spd_fail + rlwimi r7,r6,8,23,23 do_addr_mode: - READ_SPD(4) /* Get # of Column Addresses */ + READ_SPD(4) /* Get # of Column Addresses */ beq spd_read_fail - li r5, ERR_ADDR_MODE - andi. r3,r3,0x0f /* cut off reserved bits */ - cmpi 0,0,r3,8 - ble spd_fail - cmpi 0,0,r3,15 - bgt spd_fail - addi r6,r3,-8 /* calculate ADDR_MODE parameter */ - rlwimi r7,r6,4,24,27 /* set ADDR_MODE field */ + li r5, ERR_ADDR_MODE + andi. r3,r3,0x0f /* cut off reserved bits */ + cmpi 0,0,r3,8 + ble spd_fail + cmpi 0,0,r3,15 + bgt spd_fail + addi r6,r3,-8 /* calculate ADDR_MODE parameter */ + rlwimi r7,r6,4,24,27 /* set ADDR_MODE field */ set_dimm_ctrl: #ifdef SDC_AUTOPRECH_EN - oris r7,r7,0x0001 /* set auto precharge EN bit */ + oris r7,r7,0x0001 /* set auto precharge EN bit */ #endif - ori r7,r7,1 /* set ENABLE bit */ - cmpi 0,0,r10,SPD_DIMM0 - bne 1f - stw r7,SD_D0_CTRL(r4) + ori r7,r7,1 /* set ENABLE bit */ + cmpi 0,0,r10,SPD_DIMM0 + bne 1f + stw r7,SD_D0_CTRL(r4) sync - b set_dimm_bar + b set_dimm_bar 1: - stw r7,SD_D1_CTRL(r4) + stw r7,SD_D1_CTRL(r4) sync - /******************************************** - * Program SDRAM DIMMx Base Address Register - */ + /* Program SDRAM DIMMx Base Address Register */ set_dimm_bar: READ_SPD(5) /* get # of Ranks */ beq spd_read_fail - andi.r7,r3,0x7 - addi r7,r7,1 - READ_SPD(31) /* Read DIMM rank density */ + andi. r7,r3,0x7 + addi r7,r7,1 + READ_SPD(31) /* Read DIMM rank density */ beq spd_read_fail - rlwinm r5,r3,27,29,31 - rlwinm r6,r3,3,24,28 - or r5,r6,r5 /* r5 = Normalized Rank Density byte */ - lis r8, 0x0080 /* 128MB >> 4 */ - mullw r8,r8,r5 /* r8 = (rank_size >> 4) */ - mullw r8,r8,r7 /* r8 = (DIMM_size >> 4) */ - neg r7,r8 - rlwinm r7,r7,28,4,31 - or r7,r7,r11 /* set ADDR field */ - rlwinm r8,r8,12,20,31 - add r11,r11,r8 /* set Base Addr for next DIMM */ + rlwinm r5,r3,27,29,31 + rlwinm r6,r3,3,24,28 + or r5,r6,r5 /* r5 = Normalized Rank Density byte */ + lis r8, 0x0080 /* 128MB >> 4 */ + mullw r8,r8,r5 /* r8 = (rank_size >> 4) */ + mullw r8,r8,r7 /* r8 = (DIMM_size >> 4) */ + neg r7,r8 + rlwinm r7,r7,28,4,31 + or r7,r7,r11 /* set ADDR field */ + rlwinm r8,r8,12,20,31 + add r11,r11,r8 /* set Base Addr for next DIMM */ - cmpi 0,0,r10,SPD_DIMM0 - bne set_dimm1_size - stw r7,SD_D0_BAR(r4) + cmpi 0,0,r10,SPD_DIMM0 + bne set_dimm1_size + stw r7,SD_D0_BAR(r4) sync - li r10,SPD_DIMM1 + li r10,SPD_DIMM1 READ_SPD(0) bne do_each_dimm b spd_done set_dimm1_size: - stw r7,SD_D1_BAR(r4) + stw r7,SD_D1_BAR(r4) sync spd_done: blr check_next_slot: - cmpi 0,0,r10,SPD_DIMM1 - beq spd_read_fail - li r10,SPD_DIMM1 - b do_first_dimm + cmpi 0,0,r10,SPD_DIMM1 + beq spd_read_fail + li r10,SPD_DIMM1 + b do_first_dimm spd_read_fail: ori r3,r0,0xdead - b err_hung + b err_hung spd_fail: li r3,0x0bad sync -err_hung: /* hang here for debugging */ - nop - nop - b err_hung +err_hung: /* hang here for debugging */ + nop + nop + b err_hung #endif /* !SDC_HARDCODED_INIT */ - |