diff options
Diffstat (limited to 'board/g2000/g2000.c')
| -rw-r--r-- | board/g2000/g2000.c | 316 |
1 files changed, 316 insertions, 0 deletions
diff --git a/board/g2000/g2000.c b/board/g2000/g2000.c new file mode 100644 index 000000000..c0b36762b --- /dev/null +++ b/board/g2000/g2000.c @@ -0,0 +1,316 @@ +/* + * (C) Copyright 2004 + * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/processor.h> +#include <command.h> + + +#define MEM_MCOPT1_INIT_VAL 0x00800000 +#define MEM_RTR_INIT_VAL 0x04070000 +#define MEM_PMIT_INIT_VAL 0x07c00000 +#define MEM_MB0CF_INIT_VAL 0x00082001 +#define MEM_MB1CF_INIT_VAL 0x04082000 +#define MEM_SDTR1_INIT_VAL 0x00854005 +#define SDRAM0_CFG_ENABLE 0x80000000 + + + +#define CFG_SDRAM_SIZE 0x04000000 /* 64 MB */ + + +int board_early_init_f (void) +{ +#if 0 /* test-only */ + mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr (uicer, 0x00000000); /* disable all ints */ + mtdcr (uiccr, 0x00000010); + mtdcr (uicpr, 0xFFFF7FF0); /* set int polarities */ + mtdcr (uictr, 0x00000010); /* set int trigger levels */ + mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ +#else + mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(uicer, 0x00000000); /* disable all ints */ + mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ + mtdcr(uicpr, 0xFFFFFFF0); /* set int polarities */ + mtdcr(uictr, 0x10000000); /* set int trigger levels */ + mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/ + mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ +#endif + +#if 1 /* test-only */ + /* + * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us + */ + mtebc (epcr, 0xa8400000); /* ebc always driven */ +#endif + + return 0; +} + + +int misc_init_f (void) +{ + return 0; /* dummy implementation */ +} + + +int misc_init_r (void) +{ +#if (CONFIG_COMMANDS & CFG_CMD_NAND) + /* + * Set NAND-FLASH GPIO signals to default + */ + out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); + out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); +#endif + + return (0); +} + + +/* + * Check Board Identity: + */ +int checkboard (void) +{ + unsigned char str[64]; + int i = getenv_r ("serial#", str, sizeof(str)); + + puts ("Board: "); + + if (i == -1) { + puts ("### No HW ID - assuming G2000"); + } else { + puts(str); + } + + putc ('\n'); + + return 0; +} + + +/* ------------------------------------------------------------------------- + G2000 rev B is an embeded design. we don't read for spd of this version. + Doing static SDRAM controller configuration in the following section. + ------------------------------------------------------------------------- */ + +long int init_sdram_static_settings(void) +{ +#define mtsdram0(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data) + /* disable memcontroller so updates work */ + mtsdram0( mem_mcopt1, MEM_MCOPT1_INIT_VAL ); + mtsdram0( mem_rtr , MEM_RTR_INIT_VAL ); + mtsdram0( mem_pmit , MEM_PMIT_INIT_VAL ); + mtsdram0( mem_mb0cf , MEM_MB0CF_INIT_VAL ); + mtsdram0( mem_mb1cf , MEM_MB1CF_INIT_VAL ); + mtsdram0( mem_sdtr1 , MEM_SDTR1_INIT_VAL ); + + /* SDRAM have a power on delay, 500 micro should do */ + udelay(500); + mtsdram0( mem_mcopt1, MEM_MCOPT1_INIT_VAL|SDRAM0_CFG_ENABLE ); + + return (CFG_SDRAM_SIZE); /* CFG_SDRAM_SIZE is in G2000.h */ + } + + +long int initdram (int board_type) +{ + long int ret; + +/* flzt, we can still turn this on in the future */ +/* #ifdef CONFIG_SPD_EEPROM + ret = spd_sdram (); +#else + ret = init_sdram_static_settings(); +#endif +*/ + + ret = init_sdram_static_settings(); + + return ret; +} + + +#if 1 /* test-only */ +void sdram_init(void) +{ + init_sdram_static_settings(); +} +#endif + + +#if 0 /* test-only */ +long int initdram (int board_type) +{ + unsigned long val; + + mtdcr(memcfga, mem_mb0cf); + val = mfdcr(memcfgd); + +#if 0 + printf("\nmb0cf=%x\n", val); /* test-only */ + printf("strap=%x\n", mfdcr(strap)); /* test-only */ +#endif + + return (4*1024*1024 << ((val & 0x000e0000) >> 17)); +} +#endif + + +int testdram (void) +{ + /* TODO: XXX XXX XXX */ + printf ("test: 16 MB - ok\n"); + + return (0); +} + + +#if (CONFIG_COMMANDS & CFG_CMD_NAND) +#include <linux/mtd/nand.h> +extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; + +void nand_init(void) +{ + nand_probe(CFG_NAND_BASE); + if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { + print_size(nand_dev_desc[0].totlen, "\n"); + } +} +#endif + + +#if 0 /* test-only !!! */ +int do_dumpebc(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + ulong ap, cr; + + printf("\nEBC registers for PPC405GP:\n"); + mfebc(pb0ap, ap); mfebc(pb0cr, cr); + printf("0: AP=%08lx CP=%08lx\n", ap, cr); + mfebc(pb1ap, ap); mfebc(pb1cr, cr); + printf("1: AP=%08lx CP=%08lx\n", ap, cr); + mfebc(pb2ap, ap); mfebc(pb2cr, cr); + printf("2: AP=%08lx CP=%08lx\n", ap, cr); + mfebc(pb3ap, ap); mfebc(pb3cr, cr); + printf("3: AP=%08lx CP=%08lx\n", ap, cr); + mfebc(pb4ap, ap); mfebc(pb4cr, cr); + printf("4: AP=%08lx CP=%08lx\n", ap, cr); + printf("\n"); + + return 0; +} +U_BOOT_CMD( + dumpebc, 1, 1, do_dumpebc, + "dumpebc - Dump all EBC registers\n", + NULL +); + + +int do_dumpdcr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int i; + + printf("\nDevice Configuration Registers (DCR's) for PPC405GP:"); + for (i=0; i<=0x1e0; i++) { + if (!(i % 0x8)) { + printf("\n%04x ", i); + } + printf("%08lx ", get_dcr(i)); + } + printf("\n"); + + return 0; +} +U_BOOT_CMD( + dumpdcr, 1, 1, do_dumpdcr, + "dumpdcr - Dump all DCR registers\n", + NULL +); + + +int do_dumpspr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + printf("\nSpecial Purpose Registers (SPR's) for PPC405GP:"); + printf("\n%04x %08x ", 947, mfspr(947)); + printf("\n%04x %08x ", 9, mfspr(9)); + printf("\n%04x %08x ", 1014, mfspr(1014)); + printf("\n%04x %08x ", 1015, mfspr(1015)); + printf("\n%04x %08x ", 1010, mfspr(1010)); + printf("\n%04x %08x ", 957, mfspr(957)); + printf("\n%04x %08x ", 1008, mfspr(1008)); + printf("\n%04x %08x ", 1018, mfspr(1018)); + printf("\n%04x %08x ", 954, mfspr(954)); + printf("\n%04x %08x ", 950, mfspr(950)); + printf("\n%04x %08x ", 951, mfspr(951)); + printf("\n%04x %08x ", 981, mfspr(981)); + printf("\n%04x %08x ", 980, mfspr(980)); + printf("\n%04x %08x ", 982, mfspr(982)); + printf("\n%04x %08x ", 1012, mfspr(1012)); + printf("\n%04x %08x ", 1013, mfspr(1013)); + printf("\n%04x %08x ", 948, mfspr(948)); + printf("\n%04x %08x ", 949, mfspr(949)); + printf("\n%04x %08x ", 1019, mfspr(1019)); + printf("\n%04x %08x ", 979, mfspr(979)); + printf("\n%04x %08x ", 8, mfspr(8)); + printf("\n%04x %08x ", 945, mfspr(945)); + printf("\n%04x %08x ", 987, mfspr(987)); + printf("\n%04x %08x ", 287, mfspr(287)); + printf("\n%04x %08x ", 953, mfspr(953)); + printf("\n%04x %08x ", 955, mfspr(955)); + printf("\n%04x %08x ", 272, mfspr(272)); + printf("\n%04x %08x ", 273, mfspr(273)); + printf("\n%04x %08x ", 274, mfspr(274)); + printf("\n%04x %08x ", 275, mfspr(275)); + printf("\n%04x %08x ", 260, mfspr(260)); + printf("\n%04x %08x ", 276, mfspr(276)); + printf("\n%04x %08x ", 261, mfspr(261)); + printf("\n%04x %08x ", 277, mfspr(277)); + printf("\n%04x %08x ", 262, mfspr(262)); + printf("\n%04x %08x ", 278, mfspr(278)); + printf("\n%04x %08x ", 263, mfspr(263)); + printf("\n%04x %08x ", 279, mfspr(279)); + printf("\n%04x %08x ", 26, mfspr(26)); + printf("\n%04x %08x ", 27, mfspr(27)); + printf("\n%04x %08x ", 990, mfspr(990)); + printf("\n%04x %08x ", 991, mfspr(991)); + printf("\n%04x %08x ", 956, mfspr(956)); + printf("\n%04x %08x ", 284, mfspr(284)); + printf("\n%04x %08x ", 285, mfspr(285)); + printf("\n%04x %08x ", 986, mfspr(986)); + printf("\n%04x %08x ", 984, mfspr(984)); + printf("\n%04x %08x ", 256, mfspr(256)); + printf("\n%04x %08x ", 1, mfspr(1)); + printf("\n%04x %08x ", 944, mfspr(944)); + printf("\n"); + + return 0; +} +U_BOOT_CMD( + dumpspr, 1, 1, do_dumpspr, + "dumpspr - Dump all SPR registers\n", + NULL +); +#endif |