1 files changed, 127 insertions, 0 deletions
diff --git a/board/esd/ocrtc/ocrtc.c b/board/esd/ocrtc/ocrtc.c
new file mode 100644
index 000000000..3c3d56eb4
--- /dev/null
+++ b/board/esd/ocrtc/ocrtc.c
@@ -0,0 +1,127 @@
+/*
+ * (C) Copyright 2001
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include "ocrtc.h"
+#include <asm/processor.h>
+#include <i2c.h>
+#include <command.h>
+#include <cmd_boot.h>
+
+/* ------------------------------------------------------------------------- */
+
+int board_pre_init (void)
+{
+	/*
+	 * IRQ 0-15  405GP internally generated; active high; level sensitive
+	 * IRQ 16    405GP internally generated; active low; level sensitive
+	 * IRQ 17-24 RESERVED
+	 * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
+	 * IRQ 26 (EXT IRQ 1) CAN1; active low; level sensitive
+	 * IRQ 27 (EXT IRQ 2) PCI SLOT 0; active low; level sensitive
+	 * IRQ 28 (EXT IRQ 3) PCI SLOT 1; active low; level sensitive
+	 * IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
+	 * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive
+	 * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
+	 */
+	mtdcr (uicsr, 0xFFFFFFFF);	/* clear all ints */
+	mtdcr (uicer, 0x00000000);	/* disable all ints */
+	mtdcr (uiccr, 0x00000000);	/* set all to be non-critical */
+	mtdcr (uicpr, 0xFFFFFF81);	/* set int polarities */
+	mtdcr (uictr, 0x10000000);	/* set int trigger levels */
+	mtdcr (uicvcr, 0x00000001);	/* set vect base=0,INT0 highest priority */
+	mtdcr (uicsr, 0xFFFFFFFF);	/* clear all ints */
+
+	/*
+	 * EBC Configuration Register: clear EBTC -> high-Z ebc signals between
+	 * transfers, set device-paced timeout to 256 cycles
+	 */
+	mtebc (epcr, 0x20400000);
+
+	return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+int misc_init_f (void)
+{
+	return 0;					/* dummy implementation */
+}
+
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard (void)
+{
+	unsigned char str[64];
+	int i = getenv_r ("serial#", str, sizeof (str));
+
+	puts ("Board: ");
+
+	if (i == -1) {
+#ifdef CONFIG_OCRTC
+		puts ("### No HW ID - assuming OCRTC");
+#endif
+#ifdef CONFIG_ORSG
+		puts ("### No HW ID - assuming ORSG");
+#endif
+	} else {
+		puts (str);
+	}
+
+	putc ('\n');
+
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+	unsigned long val;
+
+	mtdcr (memcfga, mem_mb0cf);
+	val = mfdcr (memcfgd);
+
+#if 0
+	printf ("\nmb0cf=%x\n", val);	/* test-only */
+	printf ("strap=%x\n", mfdcr (strap));	/* test-only */
+#endif
+
+	return (4 * 1024 * 1024 << ((val & 0x000e0000) >> 17));
+}
+
+/* ------------------------------------------------------------------------- */
+
+int testdram (void)
+{
+	/* TODO: XXX XXX XXX */
+	printf ("test: 16 MB - ok\n");
+
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */