diff options
Diffstat (limited to 'board/esd/common/pci.c')
| -rw-r--r-- | board/esd/common/pci.c | 202 |
1 files changed, 202 insertions, 0 deletions
diff --git a/board/esd/common/pci.c b/board/esd/common/pci.c new file mode 100644 index 000000000..f8f180c6c --- /dev/null +++ b/board/esd/common/pci.c @@ -0,0 +1,202 @@ +/* + * (C) Copyright 2001 + * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <ppc4xx.h> +#include <asm/processor.h> +#include <pci.h> + + +u_long pci9054_iobase; + + +#define PCI_PRIMARY_CAR (0x500000dc) /* PCI config address reg */ +#define PCI_PRIMARY_CDR (0x80000000) /* PCI config data reg */ + + +/*-----------------------------------------------------------------------------+ +| Subroutine: pci9054_read_config_dword +| Description: Read a PCI configuration register +| Inputs: +| hose PCI Controller +| dev PCI Bus+Device+Function number +| offset Configuration register number +| value Address of the configuration register value +| Return value: +| 0 Successful ++-----------------------------------------------------------------------------*/ +int pci9054_read_config_dword(struct pci_controller *hose, + pci_dev_t dev, int offset, u32* value) +{ + unsigned long conAdrVal; + unsigned long val; + + /* generate coded value for CON_ADR register */ + conAdrVal = dev | (offset & 0xfc) | 0x80000000; + + /* Load the CON_ADR (CAR) value first, then read from CON_DATA (CDR) */ + *(unsigned long *)PCI_PRIMARY_CAR = conAdrVal; + + /* Note: *pResult comes back as -1 if machine check happened */ + val = in32r(PCI_PRIMARY_CDR); + + *value = (unsigned long) val; + + out32r(PCI_PRIMARY_CAR, 0); + + if ((*(unsigned long *)0x50000304) & 0x60000000) + { + /* clear pci master/target abort bits */ + *(unsigned long *)0x50000304 = *(unsigned long *)0x50000304; + } + + return 0; +} + +/*-----------------------------------------------------------------------------+ +| Subroutine: pci9054_write_config_dword +| Description: Write a PCI configuration register. +| Inputs: +| hose PCI Controller +| dev PCI Bus+Device+Function number +| offset Configuration register number +| Value Configuration register value +| Return value: +| 0 Successful +| Updated for pass2 errata #6. Need to disable interrupts and clear the +| PCICFGADR reg after writing the PCICFGDATA reg. ++-----------------------------------------------------------------------------*/ +int pci9054_write_config_dword(struct pci_controller *hose, + pci_dev_t dev, int offset, u32 value) +{ + unsigned long conAdrVal; + + conAdrVal = dev | (offset & 0xfc) | 0x80000000; + + *(unsigned long *)PCI_PRIMARY_CAR = conAdrVal; + + out32r(PCI_PRIMARY_CDR, value); + + out32r(PCI_PRIMARY_CAR, 0); + + /* clear pci master/target abort bits */ + *(unsigned long *)0x50000304 = *(unsigned long *)0x50000304; + + return (0); +} + +/*----------------------------------------------------------------------- + */ + +#ifdef CONFIG_DASA_SIM +static void pci_dasa_sim_config_pci9054(struct pci_controller *hose, pci_dev_t dev, + struct pci_config_table *_) +{ + unsigned int iobase; + unsigned short status = 0; + unsigned char timer; + + /* + * Configure PLX PCI9054 + */ + pci_read_config_word(CFG_PCI9054_DEV_FN, PCI_COMMAND, &status); + status |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY; + pci_write_config_word(CFG_PCI9054_DEV_FN, PCI_COMMAND, status); + + /* Check the latency timer for values >= 0x60. + */ + pci_read_config_byte(CFG_PCI9054_DEV_FN, PCI_LATENCY_TIMER, &timer); + if (timer < 0x60) + { + pci_write_config_byte(CFG_PCI9054_DEV_FN, PCI_LATENCY_TIMER, 0x60); + } + + /* Set I/O base register. + */ + pci_write_config_dword(CFG_PCI9054_DEV_FN, PCI_BASE_ADDRESS_0, CFG_PCI9054_IOBASE); + pci_read_config_dword(CFG_PCI9054_DEV_FN, PCI_BASE_ADDRESS_0, &iobase); + + pci9054_iobase = pci_mem_to_phys(CFG_PCI9054_DEV_FN, iobase & PCI_BASE_ADDRESS_MEM_MASK); + + if (pci9054_iobase == 0xffffffff) + { + printf("Error: Can not set I/O base register.\n"); + return; + } +} +#endif + +static struct pci_config_table pci9054_config_table[] = { +#ifndef CONFIG_PCI_PNP + { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_BUS(CFG_ETH_DEV_FN), PCI_DEV(CFG_ETH_DEV_FN), PCI_FUNC(CFG_ETH_DEV_FN), + pci_cfgfunc_config_device, { CFG_ETH_IOBASE, + CFG_ETH_IOBASE, + PCI_COMMAND_IO | PCI_COMMAND_MASTER }}, +#ifdef CONFIG_DASA_SIM + { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_BUS(CFG_PCI9054_DEV_FN), PCI_DEV(CFG_PCI9054_DEV_FN), PCI_FUNC(CFG_PCI9054_DEV_FN), + pci_dasa_sim_config_pci9054 }, +#endif +#endif + { } +}; + +static struct pci_controller pci9054_hose = { + config_table: pci9054_config_table, +}; + +void pci_init(void) +{ + struct pci_controller *hose = &pci9054_hose; + + /* + * Register the hose + */ + hose->first_busno = 0; + hose->last_busno = 0xff; + + /* System memory space */ + pci_set_region(hose->regions + 0, + 0x00000000, 0x00000000, 0x01000000, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + /* PCI Memory space */ + pci_set_region(hose->regions + 1, + 0x00000000, 0xc0000000, 0x10000000, + PCI_REGION_MEM); + + pci_set_ops(hose, + pci_hose_read_config_byte_via_dword, + pci_hose_read_config_word_via_dword, + pci9054_read_config_dword, + pci_hose_write_config_byte_via_dword, + pci_hose_write_config_word_via_dword, + pci9054_write_config_dword); + + hose->region_count = 2; + + pci_register_hose(hose); + + hose->last_busno = pci_hose_scan(hose); +} |