diff options
Diffstat (limited to 'board/esd/common/fpga.c')
| -rw-r--r-- | board/esd/common/fpga.c | 262 |
1 files changed, 262 insertions, 0 deletions
diff --git a/board/esd/common/fpga.c b/board/esd/common/fpga.c new file mode 100644 index 000000000..666b4908e --- /dev/null +++ b/board/esd/common/fpga.c @@ -0,0 +1,262 @@ +/* + * (C) Copyright 2001 + * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com + * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/processor.h> +#include <command.h> + +/* ------------------------------------------------------------------------- */ + +#ifdef FPGA_DEBUG +#define DBG(x...) printf(x) +#else +#define DBG(x...) +#endif /* DEBUG */ + +#define MAX_ONES 226 + +#define IBM405GP_GPIO0_OR 0xef600700 /* GPIO Output */ +#define IBM405GP_GPIO0_TCR 0xef600704 /* GPIO Three-State Control */ +#define IBM405GP_GPIO0_ODR 0xef600718 /* GPIO Open Drain */ +#define IBM405GP_GPIO0_IR 0xef60071c /* GPIO Input */ + +#ifdef CFG_FPGA_PRG +# define FPGA_PRG CFG_FPGA_PRG /* FPGA program pin (ppc output)*/ +# define FPGA_CLK CFG_FPGA_CLK /* FPGA clk pin (ppc output) */ +# define FPGA_DATA CFG_FPGA_DATA /* FPGA data pin (ppc output) */ +# define FPGA_DONE CFG_FPGA_DONE /* FPGA done pin (ppc input) */ +# define FPGA_INIT CFG_FPGA_INIT /* FPGA init pin (ppc input) */ +#else +# define FPGA_PRG 0x04000000 /* FPGA program pin (ppc output) */ +# define FPGA_CLK 0x02000000 /* FPGA clk pin (ppc output) */ +# define FPGA_DATA 0x01000000 /* FPGA data pin (ppc output) */ +# define FPGA_DONE 0x00800000 /* FPGA done pin (ppc input) */ +# define FPGA_INIT 0x00400000 /* FPGA init pin (ppc input) */ +#endif + +#define ERROR_FPGA_PRG_INIT_LOW -1 /* Timeout after PRG* asserted */ +#define ERROR_FPGA_PRG_INIT_HIGH -2 /* Timeout after PRG* deasserted */ +#define ERROR_FPGA_PRG_DONE -3 /* Timeout after programming */ + +#define SET_FPGA(data) out32(IBM405GP_GPIO0_OR, data) + +#define FPGA_WRITE_1 { \ + SET_FPGA(FPGA_PRG | FPGA_DATA); /* set clock to 0 */ \ + SET_FPGA(FPGA_PRG | FPGA_DATA); /* set data to 1 */ \ + SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA); /* set clock to 1 */ \ + SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1 */ + +#define FPGA_WRITE_0 { \ + SET_FPGA(FPGA_PRG | FPGA_DATA); /* set clock to 0 */ \ + SET_FPGA(FPGA_PRG); /* set data to 0 */ \ + SET_FPGA(FPGA_PRG | FPGA_CLK); /* set clock to 1 */ \ + SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1 */ + + +static int fpga_boot(unsigned char *fpgadata, int size) +{ + int i,index,len; + int count; +#ifdef CFG_FPGA_SPARTAN2 + int j; +#else + unsigned char b; + int bit; +#endif + + /* display infos on fpgaimage */ + index = 15; + for (i=0; i<4; i++) + { + len = fpgadata[index]; + DBG("FPGA: %s\n", &(fpgadata[index+1])); + index += len+3; + } + +#ifdef CFG_FPGA_SPARTAN2 + /* search for preamble 0xFFFFFFFF */ + while (1) + { + if ((fpgadata[index] == 0xff) && (fpgadata[index+1] == 0xff) && + (fpgadata[index+2] == 0xff) && (fpgadata[index+3] == 0xff)) + break; /* preamble found */ + else + index++; + } +#else + /* search for preamble 0xFF2X */ + for (index = 0; index < size-1 ; index++) + { + if ((fpgadata[index] == 0xff) && ((fpgadata[index+1] & 0xf0) == 0x30)) + break; + } + index += 2; +#endif + + DBG("FPGA: configdata starts at position 0x%x\n",index); + DBG("FPGA: length of fpga-data %d\n", size-index); + + /* + * Setup port pins for fpga programming + */ + out32(IBM405GP_GPIO0_ODR, 0x00000000); /* no open drain pins */ + out32(IBM405GP_GPIO0_TCR, FPGA_PRG | FPGA_CLK | FPGA_DATA); /* setup for output */ + out32(IBM405GP_GPIO0_OR, FPGA_PRG | FPGA_CLK | FPGA_DATA); /* set output pins to high */ + + DBG("%s, ",((in32(IBM405GP_GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" ); + DBG("%s\n",((in32(IBM405GP_GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" ); + + /* + * Init fpga by asserting and deasserting PROGRAM* + */ + SET_FPGA(FPGA_CLK | FPGA_DATA); + + /* Wait for FPGA init line low */ + count = 0; + while (in32(IBM405GP_GPIO0_IR) & FPGA_INIT) + { + udelay(1000); /* wait 1ms */ + /* Check for timeout - 100us max, so use 3ms */ + if (count++ > 3) + { + DBG("FPGA: Booting failed!\n"); + return ERROR_FPGA_PRG_INIT_LOW; + } + } + + DBG("%s, ",((in32(IBM405GP_GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" ); + DBG("%s\n",((in32(IBM405GP_GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" ); + + /* deassert PROGRAM* */ + SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA); + + /* Wait for FPGA end of init period . */ + count = 0; + while (!(in32(IBM405GP_GPIO0_IR) & FPGA_INIT)) + { + udelay(1000); /* wait 1ms */ + /* Check for timeout */ + if (count++ > 3) + { + DBG("FPGA: Booting failed!\n"); + return ERROR_FPGA_PRG_INIT_HIGH; + } + } + + DBG("%s, ",((in32(IBM405GP_GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" ); + DBG("%s\n",((in32(IBM405GP_GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" ); + + DBG("write configuration data into fpga\n"); + /* write configuration-data into fpga... */ + +#ifdef CFG_FPGA_SPARTAN2 + /* + * Load uncompressed image into fpga + */ + for (i=index; i<size; i++) + { + for (j=0; j<8; j++) + { + if ((fpgadata[i] & 0x80) == 0x80) + { + FPGA_WRITE_1; + } + else + { + FPGA_WRITE_0; + } + fpgadata[i] <<= 1; + } + } +#else + /* send 0xff 0x20 */ + FPGA_WRITE_1; FPGA_WRITE_1; FPGA_WRITE_1; FPGA_WRITE_1; + FPGA_WRITE_1; FPGA_WRITE_1; FPGA_WRITE_1; FPGA_WRITE_1; + FPGA_WRITE_0; FPGA_WRITE_0; FPGA_WRITE_1; FPGA_WRITE_0; + FPGA_WRITE_0; FPGA_WRITE_0; FPGA_WRITE_0; FPGA_WRITE_0; + + /* + ** Bit_DeCompression + ** Code 1 .. maxOnes : n '1's followed by '0' + ** maxOnes + 1 .. maxOnes + 1 : n - 1 '1's no '0' + ** maxOnes + 2 .. 254 : n - (maxOnes + 2) '0's followed by '1' + ** 255 : '1' + */ + + for (i=index; i<size; i++) + { + b = fpgadata[i]; + if ((b >= 1) && (b <= MAX_ONES)) + { + for(bit=0; bit<b; bit++) + { + FPGA_WRITE_1; + } + FPGA_WRITE_0; + } + else if (b == (MAX_ONES+1)) + { + for(bit=1; bit<b; bit++) + { + FPGA_WRITE_1; + } + } + else if ((b >= (MAX_ONES+2)) && (b <= 254)) + { + for(bit=0; bit<(b-(MAX_ONES+2)); bit++) + { + FPGA_WRITE_0; + } + FPGA_WRITE_1; + } + else if (b == 255) + { + FPGA_WRITE_1; + } + } +#endif + + DBG("%s, ",((in32(IBM405GP_GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" ); + DBG("%s\n",((in32(IBM405GP_GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" ); + + /* + * Check if fpga's DONE signal - correctly booted ? + */ + + /* Wait for FPGA end of programming period . */ + count = 0; + while (!(in32(IBM405GP_GPIO0_IR) & FPGA_DONE)) + { + udelay(1000); /* wait 1ms */ + /* Check for timeout */ + if (count++ > 3) + { + DBG("FPGA: Booting failed!\n"); + return ERROR_FPGA_PRG_DONE; + } + } + + DBG("FPGA: Booting successful!\n"); + return 0; +} |