1 files changed, 0 insertions, 113 deletions
diff --git a/board/cmc_pu2/load_sernum_ethaddr.c b/board/cmc_pu2/load_sernum_ethaddr.c
deleted file mode 100644
index 6f85dd95b..000000000
--- a/board/cmc_pu2/load_sernum_ethaddr.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * (C) Copyright 2000, 2001, 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2005
- * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* #define DEBUG */
-
-#include <common.h>
-#include <net.h>
-
-#define I2C_CHIP	0x50	/* I2C bus address of onboard EEPROM */
-#define I2C_ALEN	1	/* length of EEPROM addresses in bytes */
-#define I2C_OFFSET	0x0	/* start address of manufacturere data block
-				 * in EEPROM */
-
-/* 64 Byte manufacturer data block in EEPROM */
-struct manufacturer_data {
-	unsigned int	serial_number;	/* serial number (0...999999) */
-	unsigned short	hardware;	/* hardware version (e.g. V1.02) */
-	unsigned short	manuf_date;	/* manufacture date (e.g. 25/02) */
-	unsigned char	name[20];	/* device name (in CHIP.INI) */
-	unsigned char	macadr[6];	/* MAC address */
-	signed char	a_kal[4];	/* calibration value for U */
-	signed char	i_kal[4];	/* calibration value for I */
-	unsigned char	reserve[18];	/* reserved */
-	unsigned short	save_nr;	/* save count */
-	unsigned short	chksum;		/* checksum */
-};
-
-
-int i2c_read (unsigned char chip, unsigned int addr, int alen,
-	      unsigned char *buffer, int len);
-
-/*-----------------------------------------------------------------------
- * Process manufacturer data block in EEPROM:
- *
- * If we boot on a system fresh from factory, check if the manufacturer data
- * in the EEPROM is valid and save some information it contains.
- *
- * CMC manufacturer data is defined as follows:
- *
- * - located in the onboard EEPROM
- * - starts at offset 0x0
- * - size 0x00000040
- *
- * Internal structure: see struct definition
- */
-
-int misc_init_r(void)
-{
-	struct manufacturer_data data;
-	char  serial [9];
-	unsigned short chksum;
-	unsigned char *p;
-	unsigned short i;
-
-#if !defined(CONFIG_HARD_I2C) && !defined(CONFIG_SOFT_I2C)
-#error you must define some I2C support (CONFIG_HARD_I2C or CONFIG_SOFT_I2C)
-#endif
-	if (i2c_read(I2C_CHIP, I2C_OFFSET, I2C_ALEN, (unsigned char *)&data,
-		     sizeof(data)) != 0) {
-		puts ("Error reading manufacturer data from EEPROM\n");
-		return -1;
-	}
-
-	/* check if manufacturer data block is valid  */
-	p = (unsigned char *)&data;
-	chksum = 0;
-	for (i = 0; i < (sizeof(data) - sizeof(data.chksum)); i++)
-		chksum += *p++;
-
-	debug ("checksum of manufacturer data block: %#.4x\n", chksum);
-
-	if (chksum != data.chksum) {
-		puts ("Error: manufacturer data block has invalid checksum\n");
-		return -1;
-	}
-
-	/* copy serial number */
-	sprintf (serial, "%d", data.serial_number);
-
-	/* set serial# and ethaddr if not yet defined */
-	if (getenv("serial#") == NULL) {
-		setenv ("serial#", serial);
-	}
-
-	if (getenv("ethaddr") == NULL) {
-		eth_setenv_enetaddr("ethaddr", data.macadr);
-	}
-
-	return 0;
-}