diff options
Diffstat (limited to 'board/armltd/integratorap/flash.c')
| -rw-r--r-- | board/armltd/integratorap/flash.c | 473 | 
1 files changed, 473 insertions, 0 deletions
| diff --git a/board/armltd/integratorap/flash.c b/board/armltd/integratorap/flash.c new file mode 100644 index 000000000..0492be762 --- /dev/null +++ b/board/armltd/integratorap/flash.c @@ -0,0 +1,473 @@ +/* + * (C) Copyright 2001 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2001-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2003 + * Texas Instruments, <www.ti.com> + * Kshitij Gupta <Kshitij@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <linux/byteorder/swab.h> + +#define PHYS_FLASH_SECT_SIZE	0x00020000	/* 256 KB sectors (x2) */ +flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */ + +/* Board support for 1 or 2 flash devices */ +#undef FLASH_PORT_WIDTH32 +#define FLASH_PORT_WIDTH16 + +#ifdef FLASH_PORT_WIDTH16 +#define FLASH_PORT_WIDTH		ushort +#define FLASH_PORT_WIDTHV		vu_short +#define SWAP(x)			__swab16(x) +#else +#define FLASH_PORT_WIDTH		ulong +#define FLASH_PORT_WIDTHV		vu_long +#define SWAP(x)			__swab32(x) +#endif + +#define FPW	FLASH_PORT_WIDTH +#define FPWV	FLASH_PORT_WIDTHV + +#define mb() __asm__ __volatile__ ("" : : : "memory") + + +/* Flash Organization Structure */ +typedef struct OrgDef { +	unsigned int sector_number; +	unsigned int sector_size; +} OrgDef; + + +/* Flash Organizations */ +OrgDef OrgIntel_28F256L18T[] = { +	{4, 32 * 1024},				/* 4 * 32kBytes sectors */ +	{255, 128 * 1024},			/* 255 * 128kBytes sectors */ +}; + + +/*----------------------------------------------------------------------- + * Functions + */ +unsigned long flash_init (void); +static ulong flash_get_size (FPW * addr, flash_info_t * info); +static int write_data (flash_info_t * info, ulong dest, FPW data); +static void flash_get_offsets (ulong base, flash_info_t * info); +void inline spin_wheel (void); +void flash_print_info (flash_info_t * info); +void flash_unprotect_sectors (FPWV * addr); +int flash_erase (flash_info_t * info, int s_first, int s_last); +int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt); + +/*----------------------------------------------------------------------- + */ + +unsigned long flash_init (void) +{ +	int i; +	ulong size = 0; +	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { +		switch (i) { +		case 0: +			flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]); +			flash_get_offsets (PHYS_FLASH_1, &flash_info[i]); +			break; +		default: +			panic ("configured too many flash banks!\n"); +			break; +		} +		size += flash_info[i].size; +	} + +	/* Protect monitor and environment sectors +	 */ +	flash_protect (FLAG_PROTECT_SET, +			CONFIG_SYS_FLASH_BASE, +			CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, &flash_info[0]); + +	return size; +} + +/*----------------------------------------------------------------------- + */ +static void flash_get_offsets (ulong base, flash_info_t * info) +{ +	int i; +	OrgDef *pOrgDef; + +	pOrgDef = OrgIntel_28F256L18T; +	if (info->flash_id == FLASH_UNKNOWN) { +		return; +	} + +	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { +		for (i = 0; i < info->sector_count; i++) { +			if (i > 255) { +				info->start[i] = base + (i * 0x8000); +				info->protect[i] = 0; +			} else { +				info->start[i] = base + +						(i * PHYS_FLASH_SECT_SIZE); +				info->protect[i] = 0; +			} +		} +	} +} + +/*----------------------------------------------------------------------- + */ +void flash_print_info (flash_info_t * info) +{ +	int i; + +	if (info->flash_id == FLASH_UNKNOWN) { +		printf ("missing or unknown FLASH type\n"); +		return; +	} + +	switch (info->flash_id & FLASH_VENDMASK) { +	case FLASH_MAN_INTEL: +		printf ("INTEL "); +		break; +	default: +		printf ("Unknown Vendor "); +		break; +	} + +	switch (info->flash_id & FLASH_TYPEMASK) { +	case FLASH_28F256L18T: +		printf ("FLASH 28F256L18T\n"); +		break; +	default: +		printf ("Unknown Chip Type\n"); +		break; +	} + +	printf ("  Size: %ld MB in %d Sectors\n", +			info->size >> 20, info->sector_count); + +	printf ("  Sector Start Addresses:"); +	for (i = 0; i < info->sector_count; ++i) { +		if ((i % 5) == 0) +			printf ("\n   "); +		printf (" %08lX%s", +			info->start[i], info->protect[i] ? " (RO)" : "     "); +	} +	printf ("\n"); +	return; +} + +/* + * The following code cannot be run from FLASH! + */ +static ulong flash_get_size (FPW * addr, flash_info_t * info) +{ +	volatile FPW value; + +	/* Write auto select command: read Manufacturer ID */ +	addr[0x5555] = (FPW) 0x00AA00AA; +	addr[0x2AAA] = (FPW) 0x00550055; +	addr[0x5555] = (FPW) 0x00900090; + +	mb (); +	value = addr[0]; + +	switch (value) { + +	case (FPW) INTEL_MANUFACT: +		info->flash_id = FLASH_MAN_INTEL; +		break; + +	default: +		info->flash_id = FLASH_UNKNOWN; +		info->sector_count = 0; +		info->size = 0; +		addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */ +		return (0);		/* no or unknown flash  */ +	} + +	mb (); +	value = addr[1];	/* device ID        */ +	switch (value) { + +	case (FPW) (INTEL_ID_28F256L18T): +		info->flash_id += FLASH_28F256L18T; +		info->sector_count = 259; +		info->size = 0x02000000; +		break;			/* => 32 MB     */ + +	default: +		info->flash_id = FLASH_UNKNOWN; +		break; +	} + +	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { +		printf ("** ERROR: sector count %d > max (%d) **\n", +				info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); +		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; +	} + +	addr[0] = (FPW) 0x00FF00FF;	/* restore read mode */ + +	return (info->size); +} + + +/* unprotects a sector for write and erase + * on some intel parts, this unprotects the entire chip, but it + * wont hurt to call this additional times per sector... + */ +void flash_unprotect_sectors (FPWV * addr) +{ +#define PD_FINTEL_WSMS_READY_MASK    0x0080 + +	*addr = (FPW) 0x00500050;	/* clear status register */ + +	/* this sends the clear lock bit command */ +	*addr = (FPW) 0x00600060; +	*addr = (FPW) 0x00D000D0; +} + + +/*----------------------------------------------------------------------- + */ + +int flash_erase (flash_info_t * info, int s_first, int s_last) +{ +	int flag, prot, sect; +	ulong type, start, last; +	int rcode = 0; + +	if ((s_first < 0) || (s_first > s_last)) { +		if (info->flash_id == FLASH_UNKNOWN) { +			printf ("- missing\n"); +		} else { +			printf ("- no sectors to erase\n"); +		} +		return 1; +	} + +	type = (info->flash_id & FLASH_VENDMASK); +	if ((type != FLASH_MAN_INTEL)) { +		printf ("Can't erase unknown flash type %08lx - aborted\n", +				info->flash_id); +		return 1; +	} + +	prot = 0; +	for (sect = s_first; sect <= s_last; ++sect) { +		if (info->protect[sect]) { +			prot++; +		} +	} + +	if (prot) { +		printf ("- Warning: %d protected sectors will not be erased!\n", +				prot); +	} else { +		printf ("\n"); +	} + + +	start = get_timer (0); +	last = start; + +	/* Disable interrupts which might cause a timeout here */ +	flag = disable_interrupts (); + +	/* Start erase on unprotected sectors */ +	for (sect = s_first; sect <= s_last; sect++) { +		if (info->protect[sect] == 0) {	/* not protected */ +			FPWV *addr = (FPWV *) (info->start[sect]); +			FPW status; + +			printf ("Erasing sector %2d ... ", sect); + +			flash_unprotect_sectors (addr); + +			/* arm simple, non interrupt dependent timer */ +			reset_timer_masked (); + +			*addr = (FPW) 0x00500050;/* clear status register */ +			*addr = (FPW) 0x00200020;/* erase setup */ +			*addr = (FPW) 0x00D000D0;/* erase confirm */ + +			while (((status = +				*addr) & (FPW) 0x00800080) != +				(FPW) 0x00800080) { +					if (get_timer_masked () > +					CONFIG_SYS_FLASH_ERASE_TOUT) { +					printf ("Timeout\n"); +					/* suspend erase     */ +					*addr = (FPW) 0x00B000B0; +					/* reset to read mode */ +					*addr = (FPW) 0x00FF00FF; +					rcode = 1; +					break; +				} +			} + +			/* clear status register cmd.   */ +			*addr = (FPW) 0x00500050; +			*addr = (FPW) 0x00FF00FF;/* resest to read mode */ +			printf (" done\n"); +		} +	} +	return rcode; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + * 4 - Flash not identified + */ + +int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) +{ +	ulong cp, wp; +	FPW data; +	int count, i, l, rc, port_width; + +	if (info->flash_id == FLASH_UNKNOWN) { +		return 4; +	} +/* get lower word aligned address */ +#ifdef FLASH_PORT_WIDTH16 +	wp = (addr & ~1); +	port_width = 2; +#else +	wp = (addr & ~3); +	port_width = 4; +#endif + +	/* +	 * handle unaligned start bytes +	 */ +	if ((l = addr - wp) != 0) { +		data = 0; +		for (i = 0, cp = wp; i < l; ++i, ++cp) { +			data = (data << 8) | (*(uchar *) cp); +		} +		for (; i < port_width && cnt > 0; ++i) { +			data = (data << 8) | *src++; +			--cnt; +			++cp; +		} +		for (; cnt == 0 && i < port_width; ++i, ++cp) { +			data = (data << 8) | (*(uchar *) cp); +		} + +		if ((rc = write_data (info, wp, SWAP (data))) != 0) { +			return (rc); +		} +		wp += port_width; +	} + +	/* +	 * handle word aligned part +	 */ +	count = 0; +	while (cnt >= port_width) { +		data = 0; +		for (i = 0; i < port_width; ++i) { +			data = (data << 8) | *src++; +		} +		if ((rc = write_data (info, wp, SWAP (data))) != 0) { +			return (rc); +		} +		wp += port_width; +		cnt -= port_width; +		if (count++ > 0x800) { +			spin_wheel (); +			count = 0; +		} +	} + +	if (cnt == 0) { +		return (0); +	} + +	/* +	 * handle unaligned tail bytes +	 */ +	data = 0; +	for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) { +		data = (data << 8) | *src++; +		--cnt; +	} +	for (; i < port_width; ++i, ++cp) { +		data = (data << 8) | (*(uchar *) cp); +	} + +	return (write_data (info, wp, SWAP (data))); +} + +/*----------------------------------------------------------------------- + * Write a word or halfword to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +static int write_data (flash_info_t * info, ulong dest, FPW data) +{ +	FPWV *addr = (FPWV *) dest; +	ulong status; +	int flag; + +	/* Check if Flash is (sufficiently) erased */ +	if ((*addr & data) != data) { +		printf ("not erased at %08lx (%x)\n", (ulong) addr, *addr); +		return (2); +	} +	flash_unprotect_sectors (addr); +	/* Disable interrupts which might cause a timeout here */ +	flag = disable_interrupts (); +	*addr = (FPW) 0x00400040;	/* write setup */ +	*addr = data; + +	/* arm simple, non interrupt dependent timer */ +	reset_timer_masked (); + +	/* wait while polling the status register */ +	while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { +		if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { +			*addr = (FPW) 0x00FF00FF;	/* restore read mode */ +			return (1); +		} +	} +	*addr = (FPW) 0x00FF00FF;	/* restore read mode */ +	return (0); +} + +void inline spin_wheel (void) +{ +	static int p = 0; +	static char w[] = "\\/-"; + +	printf ("\010%c", w[p]); +	(++p == 3) ? (p = 0) : 0; +} |