summaryrefslogtreecommitdiff
path: root/board/amcc
diff options
context:
space:
mode:
Diffstat (limited to 'board/amcc')
-rw-r--r--board/amcc/bamboo/Makefile17
-rw-r--r--board/amcc/bubinga/Makefile16
-rw-r--r--board/amcc/common/flash.c60
-rw-r--r--board/amcc/ebony/Makefile16
-rw-r--r--board/amcc/luan/Makefile17
-rw-r--r--board/amcc/ocotea/Makefile16
-rw-r--r--board/amcc/sequoia/Makefile52
-rw-r--r--board/amcc/sequoia/config.mk41
-rw-r--r--board/amcc/sequoia/init.S157
-rw-r--r--board/amcc/sequoia/sdram.c83
-rw-r--r--board/amcc/sequoia/sequoia.c560
-rw-r--r--board/amcc/sequoia/sequoia.h67
-rw-r--r--board/amcc/sequoia/u-boot-nand.lds137
-rw-r--r--board/amcc/sequoia/u-boot.lds145
-rw-r--r--board/amcc/walnut/Makefile16
-rw-r--r--board/amcc/yellowstone/Makefile16
-rw-r--r--board/amcc/yosemite/Makefile16
-rw-r--r--board/amcc/yucca/Makefile16
-rw-r--r--board/amcc/yucca/yucca.c105
-rw-r--r--board/amcc/yucca/yucca.h3
20 files changed, 1461 insertions, 95 deletions
diff --git a/board/amcc/bamboo/Makefile b/board/amcc/bamboo/Makefile
index 5654f91a8..5f3e34e24 100644
--- a/board/amcc/bamboo/Makefile
+++ b/board/amcc/bamboo/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o
-OBJS += flash.o
+COBJS = $(BOARD).o flash.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -40,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/amcc/bubinga/Makefile b/board/amcc/bubinga/Makefile
index f5bda5519..e78ed5f92 100644
--- a/board/amcc/bubinga/Makefile
+++ b/board/amcc/bubinga/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,9 +23,13 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/amcc/common/flash.c b/board/amcc/common/flash.c
index a0acbba70..e6429ecd1 100644
--- a/board/amcc/common/flash.c
+++ b/board/amcc/common/flash.c
@@ -35,7 +35,7 @@
#include <ppc4xx.h>
#include <asm/processor.h>
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
/*-----------------------------------------------------------------------
* Functions
@@ -76,7 +76,7 @@ void flash_print_info(flash_info_t * info)
case FLASH_MAN_SST:
printf("SST ");
break;
- case FLASH_MAN_MX:
+ case FLASH_MAN_MX:
printf ("MACRONIX ");
break;
default:
@@ -223,75 +223,75 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
return (0); /* no or unknown flash */
}
- value = addr2[1]; /* device ID */
+ value = addr2[1]; /* device ID */
DEBUGF("\nFLASH DEVICEID: %x\n", value);
switch (value) {
case (CFG_FLASH_WORD_SIZE) AMD_ID_LV040B:
info->flash_id += FLASH_AM040;
info->sector_count = 8;
- info->size = 0x0080000; /* => 512 ko */
+ info->size = 0x0080000; /* => 512 KiB */
break;
case (CFG_FLASH_WORD_SIZE) AMD_ID_F040B:
info->flash_id += FLASH_AM040;
info->sector_count = 8;
- info->size = 0x0080000; /* => 512 ko */
+ info->size = 0x0080000; /* => 512 KiB */
break;
case (CFG_FLASH_WORD_SIZE) STM_ID_M29W040B:
info->flash_id += FLASH_AM040;
info->sector_count = 8;
- info->size = 0x0080000; /* => 512 ko */
+ info->size = 0x0080000; /* => 512 KiB */
break;
case (CFG_FLASH_WORD_SIZE) AMD_ID_F016D:
info->flash_id += FLASH_AMD016;
info->sector_count = 32;
- info->size = 0x00200000;
- break; /* => 2 MB */
+ info->size = 0x00200000; /* => 2 MiB */
+ break;
case (CFG_FLASH_WORD_SIZE) AMD_ID_LV033C:
info->flash_id += FLASH_AMDLV033C;
info->sector_count = 64;
- info->size = 0x00400000;
- break; /* => 4 MB */
+ info->size = 0x00400000; /* => 4 MiB */
+ break;
case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400T:
info->flash_id += FLASH_AM400T;
info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
+ info->size = 0x00080000; /* => 512 KiB */
+ break;
case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400B:
info->flash_id += FLASH_AM400B;
info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
+ info->size = 0x00080000; /* => 512 KiB */
+ break;
case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800T:
info->flash_id += FLASH_AM800T;
info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
+ info->size = 0x00100000; /* => 1 MiB */
+ break;
case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800B:
info->flash_id += FLASH_AM800B;
info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
+ info->size = 0x00100000; /* => 1 MiB */
+ break;
case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160T:
info->flash_id += FLASH_AM160T;
info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
+ info->size = 0x00200000; /* => 2 MiB */
+ break;
case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160B:
info->flash_id += FLASH_AM160B;
info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
+ info->size = 0x00200000; /* => 2 MiB */
+ break;
default:
info->flash_id = FLASH_UNKNOWN;
@@ -306,7 +306,7 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
info->start[i] = base + (i * 0x00010000);
} else {
if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
+ /* set sector offsets for bottom boot block type */
info->start[0] = base + 0x00000000;
info->start[1] = base + 0x00004000;
info->start[2] = base + 0x00006000;
@@ -316,7 +316,7 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
base + (i * 0x00010000) - 0x00030000;
}
} else {
- /* set sector offsets for top boot block type */
+ /* set sector offsets for top boot block type */
i = info->sector_count - 1;
info->start[i--] = base + info->size - 0x00004000;
info->start[i--] = base + info->size - 0x00006000;
@@ -666,7 +666,7 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
return (0); /* no or unknown flash */
}
- value = addr2[1]; /* device ID */
+ value = addr2[1]; /* device ID */
DEBUGF("\nFLASH DEVICEID: %x\n", value);
@@ -675,17 +675,17 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320T:
info->flash_id += FLASH_AM320T;
info->sector_count = 71;
- info->size = 0x00400000; break; /* => 4 MB */
+ info->size = 0x00400000; break; /* => 4 MiB */
case (CFG_FLASH_WORD_SIZE)AMD_ID_LV320B:
info->flash_id += FLASH_AM320B;
info->sector_count = 71;
- info->size = 0x00400000; break; /* => 4 MB */
+ info->size = 0x00400000; break; /* => 4 MiB */
case (CFG_FLASH_WORD_SIZE)STM_ID_29W320DT:
info->flash_id += FLASH_STMW320DT;
info->sector_count = 67;
- info->size = 0x00400000; break; /* => 4 MB */
+ info->size = 0x00400000; break; /* => 4 MiB */
case (CFG_FLASH_WORD_SIZE)MX_ID_LV320T:
info->flash_id += FLASH_MXLV320T;
@@ -743,7 +743,7 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
info->start[i] = base + i * 0x00010000;
} else {
if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
+ /* set sector offsets for bottom boot block type */
info->start[0] = base + 0x00000000;
info->start[1] = base + 0x00004000;
info->start[2] = base + 0x00006000;
@@ -753,7 +753,7 @@ static ulong flash_get_size_2(vu_long * addr, flash_info_t * info)
base + (i * 0x00010000) - 0x00030000;
}
} else {
- /* set sector offsets for top boot block type */
+ /* set sector offsets for top boot block type */
i = info->sector_count - 1;
info->start[i--] = base + info->size - 0x00004000;
info->start[i--] = base + info->size - 0x00006000;
diff --git a/board/amcc/ebony/Makefile b/board/amcc/ebony/Makefile
index 4a3927be7..5f3e34e24 100644
--- a/board/amcc/ebony/Makefile
+++ b/board/amcc/ebony/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/amcc/luan/Makefile b/board/amcc/luan/Makefile
index 5654f91a8..5f3e34e24 100644
--- a/board/amcc/luan/Makefile
+++ b/board/amcc/luan/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,12 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o
-OBJS += flash.o
+COBJS = $(BOARD).o flash.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -40,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/amcc/ocotea/Makefile b/board/amcc/ocotea/Makefile
index af223d2c5..4def7fd79 100644
--- a/board/amcc/ocotea/Makefile
+++ b/board/amcc/ocotea/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/amcc/sequoia/Makefile b/board/amcc/sequoia/Makefile
new file mode 100644
index 000000000..b29c04a0d
--- /dev/null
+++ b/board/amcc/sequoia/Makefile
@@ -0,0 +1,52 @@
+#
+# (C) Copyright 2002-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+include $(TOPDIR)/include/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o sdram.o
+SOBJS = init.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/amcc/sequoia/config.mk b/board/amcc/sequoia/config.mk
new file mode 100644
index 000000000..7713a72be
--- /dev/null
+++ b/board/amcc/sequoia/config.mk
@@ -0,0 +1,41 @@
+#
+# (C) Copyright 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+# AMCC 440EPx Reference Platform (Sequoia) board
+#
+
+sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+
+ifndef TEXT_BASE
+TEXT_BASE = 0xFFFA0000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
diff --git a/board/amcc/sequoia/init.S b/board/amcc/sequoia/init.S
new file mode 100644
index 000000000..3d4ac8543
--- /dev/null
+++ b/board/amcc/sequoia/init.S
@@ -0,0 +1,157 @@
+/*
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+
+/* General */
+#define TLB_VALID 0x00000200
+#define _256M 0x10000000
+
+/* Supported page sizes */
+
+#define SZ_1K 0x00000000
+#define SZ_4K 0x00000010
+#define SZ_16K 0x00000020
+#define SZ_64K 0x00000030
+#define SZ_256K 0x00000040
+#define SZ_1M 0x00000050
+#define SZ_8M 0x00000060
+#define SZ_16M 0x00000070
+#define SZ_256M 0x00000090
+
+/* Storage attributes */
+#define SA_W 0x00000800 /* Write-through */
+#define SA_I 0x00000400 /* Caching inhibited */
+#define SA_M 0x00000200 /* Memory coherence */
+#define SA_G 0x00000100 /* Guarded */
+#define SA_E 0x00000080 /* Endian */
+
+/* Access control */
+#define AC_X 0x00000024 /* Execute */
+#define AC_W 0x00000012 /* Write */
+#define AC_R 0x00000009 /* Read */
+
+/* Some handy macros */
+
+#define EPN(e) ((e) & 0xfffffc00)
+#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) )
+#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) )
+#define TLB2(a) ( (a)&0x00000fbf )
+
+#define tlbtab_start\
+ mflr r1 ;\
+ bl 0f ;
+
+#define tlbtab_end\
+ .long 0, 0, 0 ; \
+0: mflr r0 ; \
+ mtlr r1 ; \
+ blr ;
+
+#define tlbentry(epn,sz,rpn,erpn,attr)\
+ .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
+
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ * Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+ .section .bootpg,"ax"
+ .globl tlbtab
+
+tlbtab:
+ tlbtab_start
+
+ /*
+ * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
+ * speed up boot process. It is patched after relocation to enable SA_I
+ */
+#ifndef CONFIG_NAND_SPL
+ tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G )
+#else
+ tlbentry( CFG_NAND_BOOT_SPL_SRC, SZ_4K, CFG_NAND_BOOT_SPL_SRC, 1, AC_R|AC_W|AC_X|SA_G )
+#endif
+
+ /* TLB-entry for DDR SDRAM (Up to 2GB) */
+ tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+
+#ifdef CFG_INIT_RAM_DCACHE
+ /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
+ tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
+#endif
+
+ /* TLB-entry for PCI Memory */
+ tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 1, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I )
+
+ /* TLB-entry for EBC */
+ tlbentry( CFG_BCSR_BASE, SZ_1K, CFG_BCSR_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+
+ /* TLB-entry for NAND */
+ tlbentry( CFG_NAND_ADDR, SZ_1K, CFG_NAND_ADDR, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+
+ /* TLB-entry for Internal Registers & OCM */
+ tlbentry( 0xe0000000, SZ_16M, 0xe0000000, 0, AC_R|AC_W|AC_X|SA_I )
+
+ /*TLB-entry PCI registers*/
+ tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1, AC_R|AC_W|AC_X|SA_G|SA_I )
+
+ /* TLB-entry for peripherals */
+ tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I)
+
+ tlbtab_end
+
+#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+ /*
+ * For NAND booting the first TLB has to be reconfigured to full size
+ * and with caching disabled after running from RAM!
+ */
+#define TLB00 TLB0(CFG_BOOT_BASE_ADDR, SZ_256M)
+#define TLB01 TLB1(CFG_BOOT_BASE_ADDR, 1)
+#define TLB02 TLB2(AC_R|AC_W|AC_X|SA_G|SA_I)
+
+ .globl reconfig_tlb0
+reconfig_tlb0:
+ sync
+ isync
+ addi r4,r0,0x0000 /* TLB entry #0 */
+ lis r5,TLB00@h
+ ori r5,r5,TLB00@l
+ tlbwe r5,r4,0x0000 /* Save it out */
+ lis r5,TLB01@h
+ ori r5,r5,TLB01@l
+ tlbwe r5,r4,0x0001 /* Save it out */
+ lis r5,TLB02@h
+ ori r5,r5,TLB02@l
+ tlbwe r5,r4,0x0002 /* Save it out */
+ sync
+ isync
+ blr
+#endif
diff --git a/board/amcc/sequoia/sdram.c b/board/amcc/sequoia/sdram.c
new file mode 100644
index 000000000..a62648bb5
--- /dev/null
+++ b/board/amcc/sequoia/sdram.c
@@ -0,0 +1,83 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <ppc440.h>
+
+/*************************************************************************
+ *
+ * initdram -- 440EPx's DDR controller is a DENALI Core
+ *
+ ************************************************************************/
+long int initdram (int board_type)
+{
+#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+ volatile ulong val;
+
+ mtsdram(DDR0_02, 0x00000000);
+
+ /*
+ * Soft-reset SDRAM controller
+ */
+ mtsdr(sdr_srst, SDR0_SRST0_DMC);
+ mtsdr(sdr_srst, 0x00000000);
+
+ mtsdram(DDR0_00, 0x0000190A);
+ mtsdram(DDR0_01, 0x01000000);
+ mtsdram(DDR0_03, 0x02030602);
+ mtsdram(DDR0_04, 0x13030300);
+ mtsdram(DDR0_05, 0x0202050E);
+ mtsdram(DDR0_06, 0x0104C823);
+ mtsdram(DDR0_07, 0x000D0100);
+ mtsdram(DDR0_08, 0x02360001);
+ mtsdram(DDR0_09, 0x00011D5F);
+ mtsdram(DDR0_10, 0x00000300);
+ mtsdram(DDR0_11, 0x0027C800);
+ mtsdram(DDR0_12, 0x00000003);
+ mtsdram(DDR0_14, 0x00000000);
+ mtsdram(DDR0_17, 0x19000000);
+ mtsdram(DDR0_18, 0x19191919);
+ mtsdram(DDR0_19, 0x19191919);
+ mtsdram(DDR0_20, 0x0B0B0B0B);
+ mtsdram(DDR0_21, 0x0B0B0B0B);
+ mtsdram(DDR0_22, 0x00267F0B);
+ mtsdram(DDR0_23, 0x00000000);
+ mtsdram(DDR0_24, 0x01010002);
+ mtsdram(DDR0_26, 0x5B260181);
+ mtsdram(DDR0_27, 0x0000682B);
+ mtsdram(DDR0_28, 0x00000000);
+ mtsdram(DDR0_31, 0x00000000);
+ mtsdram(DDR0_42, 0x01000006);
+ mtsdram(DDR0_43, 0x050A0200);
+ mtsdram(DDR0_44, 0x00000005);
+ mtsdram(DDR0_02, 0x00000001);
+
+ /*
+ * Wait for DCC master delay line to finish calibration
+ */
+ mfsdram(DDR0_17, val);
+ while (((val >> 8) & 0x000007f) == 0) {
+ mfsdram(DDR0_17, val);
+ }
+#endif /* #ifndef CONFIG_NAND_U_BOOT */
+
+ return (CFG_MBYTES_SDRAM << 20);
+}
diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c
new file mode 100644
index 000000000..a8ba2c083
--- /dev/null
+++ b/board/amcc/sequoia/sequoia.c
@@ -0,0 +1,560 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2006
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <ppc440.h>
+#include "sequoia.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+int board_early_init_f(void)
+{
+ unsigned long sdr0_cust0;
+ unsigned long sdr0_pfc1, sdr0_pfc2;
+ register uint reg;
+
+ mtdcr(ebccfga, xbcfg);
+ mtdcr(ebccfgd, 0xb8400000);
+
+ /*--------------------------------------------------------------------
+ * Setup the GPIO pins
+ *-------------------------------------------------------------------*/
+ /* test-only: take GPIO init from pcs440ep ???? in config file */
+ out32(GPIO0_OR, 0x00000000);
+ out32(GPIO0_TCR, 0x0000000f);
+ out32(GPIO0_OSRL, 0x50015400);
+ out32(GPIO0_OSRH, 0x550050aa);
+ out32(GPIO0_TSRL, 0x50015400);
+ out32(GPIO0_TSRH, 0x55005000);
+ out32(GPIO0_ISR1L, 0x50000000);
+ out32(GPIO0_ISR1H, 0x00000000);
+ out32(GPIO0_ISR2L, 0x00000000);
+ out32(GPIO0_ISR2H, 0x00000100);
+ out32(GPIO0_ISR3L, 0x00000000);
+ out32(GPIO0_ISR3H, 0x00000000);
+
+ out32(GPIO1_OR, 0x00000000);
+ out32(GPIO1_TCR, 0xc2000000);
+ out32(GPIO1_OSRL, 0x5c280000);
+ out32(GPIO1_OSRH, 0x00000000);
+ out32(GPIO1_TSRL, 0x0c000000);
+ out32(GPIO1_TSRH, 0x00000000);
+ out32(GPIO1_ISR1L, 0x00005550);
+ out32(GPIO1_ISR1H, 0x00000000);
+ out32(GPIO1_ISR2L, 0x00050000);
+ out32(GPIO1_ISR2H, 0x00000000);
+ out32(GPIO1_ISR3L, 0x01400000);
+ out32(GPIO1_ISR3H, 0x00000000);
+
+ /*--------------------------------------------------------------------
+ * Setup the interrupt controller polarities, triggers, etc.
+ *-------------------------------------------------------------------*/
+ mtdcr(uic0sr, 0xffffffff); /* clear all */
+ mtdcr(uic0er, 0x00000000); /* disable all */
+ mtdcr(uic0cr, 0x00000005); /* ATI & UIC1 crit are critical */
+ mtdcr(uic0pr, 0xfffff7ff); /* per ref-board manual */
+ mtdcr(uic0tr, 0x00000000); /* per ref-board manual */
+ mtdcr(uic0vr, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(uic0sr, 0xffffffff); /* clear all */
+
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
+ mtdcr(uic1er, 0x00000000); /* disable all */
+ mtdcr(uic1cr, 0x00000000); /* all non-critical */
+ mtdcr(uic1pr, 0xffffffff); /* per ref-board manual */
+ mtdcr(uic1tr, 0x00000000); /* per ref-board manual */
+ mtdcr(uic1vr, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
+
+ mtdcr(uic2sr, 0xffffffff); /* clear all */
+ mtdcr(uic2er, 0x00000000); /* disable all */
+ mtdcr(uic2cr, 0x00000000); /* all non-critical */
+ mtdcr(uic2pr, 0xffffffff); /* per ref-board manual */
+ mtdcr(uic2tr, 0x00000000); /* per ref-board manual */
+ mtdcr(uic2vr, 0x00000000); /* int31 highest, base=0x000 */
+ mtdcr(uic2sr, 0xffffffff); /* clear all */
+
+ /* 50MHz tmrclk */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00;
+
+ /* clear write protects */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00;
+
+ /* enable Ethernet */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0x00;
+
+ /* enable USB device */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x20;
+
+ /* select Ethernet pins */
+ mfsdr(SDR0_PFC1, sdr0_pfc1);
+ sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) | SDR0_PFC1_SELECT_CONFIG_4;
+ mfsdr(SDR0_PFC2, sdr0_pfc2);
+ sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | SDR0_PFC2_SELECT_CONFIG_4;
+ mtsdr(SDR0_PFC2, sdr0_pfc2);
+ mtsdr(SDR0_PFC1, sdr0_pfc1);
+
+ /* PCI arbiter enabled */
+ mfsdr(sdr_pci0, reg);
+ mtsdr(sdr_pci0, 0x80000000 | reg);
+
+ /* setup NAND FLASH */
+ mfsdr(SDR0_CUST0, sdr0_cust0);
+ sdr0_cust0 = SDR0_CUST0_MUX_NDFC_SEL |
+ SDR0_CUST0_NDFC_ENABLE |
+ SDR0_CUST0_NDFC_BW_8_BIT |
+ SDR0_CUST0_NDFC_ARE_MASK |
+ (0x80000000 >> (28 + CFG_NAND_CS));
+ mtsdr(SDR0_CUST0, sdr0_cust0);
+
+ return 0;
+}
+
+/*---------------------------------------------------------------------------+
+ | misc_init_r.
+ +---------------------------------------------------------------------------*/
+int misc_init_r(void)
+{
+ uint pbcr;
+ int size_val = 0;
+#ifdef CONFIG_440EPX
+ unsigned long usb2d0cr = 0;
+ unsigned long usb2phy0cr, usb2h0cr = 0;
+ unsigned long sdr0_pfc1;
+ char *act = getenv("usbact");
+#endif
+
+ /*
+ * FLASH stuff...
+ */
+
+ /* Re-do sizing to get full correct info */
+#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+ mtdcr(ebccfga, pb3cr);
+#else
+ mtdcr(ebccfga, pb0cr);
+#endif
+ pbcr = mfdcr(ebccfgd);
+ switch (gd->bd->bi_flashsize) {
+ case 1 << 20:
+ size_val = 0;
+ break;
+ case 2 << 20:
+ size_val = 1;
+ break;
+ case 4 << 20:
+ size_val = 2;
+ break;
+ case 8 << 20:
+ size_val = 3;
+ break;
+ case 16 << 20:
+ size_val = 4;
+ break;
+ case 32 << 20:
+ size_val = 5;
+ break;
+ case 64 << 20:
+ size_val = 6;
+ break;
+ case 128 << 20:
+ size_val = 7;
+ break;
+ }
+ pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
+#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+ mtdcr(ebccfga, pb3cr);
+#else
+ mtdcr(ebccfga, pb0cr);
+#endif
+ mtdcr(ebccfgd, pbcr);
+
+ /* adjust flash start and offset */
+ gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
+ gd->bd->bi_flashoffset = 0;
+
+#ifdef CFG_ENV_IS_IN_FLASH
+ /* Monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ -CFG_MONITOR_LEN,
+ 0xffffffff,
+ &flash_info[0]);
+
+ /* Env protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR_REDUND,
+ CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1,
+ &flash_info[0]);
+#endif
+
+ /*
+ * USB suff...
+ */
+#ifdef CONFIG_440EPX
+ if (act == NULL || strcmp(act, "hostdev") == 0) {
+ /* SDR Setting */
+ mfsdr(SDR0_PFC1, sdr0_pfc1);
+ mfsdr(SDR0_USB0, usb2d0cr);
+ mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+ mfsdr(SDR0_USB2H0CR, usb2h0cr);
+
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; /*1*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/
+
+ /* An 8-bit/60MHz interface is the only possible alternative
+ when connecting the Device to the PHY */
+ usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
+ usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; /*1*/
+
+ /* To enable the USB 2.0 Device function through the UTMI interface */
+ usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
+ usb2d0cr = usb2d0cr | SDR0_USB2D0CR_USB2DEV_SELECTION; /*1*/
+
+ sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
+ sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL; /*0*/
+
+ mtsdr(SDR0_PFC1, sdr0_pfc1);
+ mtsdr(SDR0_USB0, usb2d0cr);
+ mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+ mtsdr(SDR0_USB2H0CR, usb2h0cr);
+
+ /*clear resets*/
+ udelay (1000);
+ mtsdr(SDR0_SRST1, 0x00000000);
+ udelay (1000);
+ mtsdr(SDR0_SRST0, 0x00000000);
+
+ printf("USB: Host(int phy) Device(ext phy)\n");
+
+ } else if (strcmp(act, "dev") == 0) {
+ /*-------------------PATCH-------------------------------*/
+ mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; /*0*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/
+ mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+
+ udelay (1000);
+ mtsdr(SDR0_SRST1, 0x672c6000);
+
+ udelay (1000);
+ mtsdr(SDR0_SRST0, 0x00000080);
+
+ udelay (1000);
+ mtsdr(SDR0_SRST1, 0x60206000);
+
+ *(unsigned int *)(0xe0000350) = 0x00000001;
+
+ udelay (1000);
+ mtsdr(SDR0_SRST1, 0x60306000);
+ /*-------------------PATCH-------------------------------*/
+
+ /* SDR Setting */
+ mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+ mfsdr(SDR0_USB2H0CR, usb2h0cr);
+ mfsdr(SDR0_USB0, usb2d0cr);
+ mfsdr(SDR0_PFC1, sdr0_pfc1);
+
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ; /*0*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN; /*1*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV; /*0*/
+ usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
+ usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV; /*0*/
+
+ usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
+ usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ; /*0*/
+
+ usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
+ usb2d0cr = usb2d0cr | SDR0_USB2D0CR_EBC_SELECTION; /*0*/
+
+ sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
+ sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL; /*1*/
+
+ mtsdr(SDR0_USB2H0CR, usb2h0cr);
+ mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
+ mtsdr(SDR0_USB0, usb2d0cr);
+ mtsdr(SDR0_PFC1, sdr0_pfc1);
+
+ /*clear resets*/
+ udelay (1000);
+ mtsdr(SDR0_SRST1, 0x00000000);
+ udelay (1000);
+ mtsdr(SDR0_SRST0, 0x00000000);
+
+ printf("USB: Device(int phy)\n");
+ }
+#endif /* CONFIG_440EPX */
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ char *s = getenv("serial#");
+
+#ifdef CONFIG_440EPX
+ printf("Board: Sequoia - AMCC PPC440EPx Evaluation Board");
+#else
+ printf("Board: Rainier - AMCC PPC440GRx Evaluation Board");
+#endif
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+ putc('\n');
+
+ return (0);
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram(void)
+{
+ unsigned long *mem = (unsigned long *)0;
+ const unsigned long kend = (1024 / sizeof(unsigned long));
+ unsigned long k, n;
+
+ mtmsr(0);
+
+ for (k = 0; k < CFG_MBYTES_SDRAM;
+ ++k, mem += (1024 / sizeof(unsigned long))) {
+ if ((k & 1023) == 0) {
+ printf("%3d MB\r", k / 1024);
+ }
+
+ memset(mem, 0xaaaaaaaa, 1024);
+ for (n = 0; n < kend; ++n) {
+ if (mem[n] != 0xaaaaaaaa) {
+ printf("SDRAM test fails at: %08x\n",
+ (uint) & mem[n]);
+ return 1;
+ }
+ }
+
+ memset(mem, 0x55555555, 1024);
+ for (n = 0; n < kend; ++n) {
+ if (mem[n] != 0x55555555) {
+ printf("SDRAM test fails at: %08x\n",
+ (uint) & mem[n]);
+ return 1;
+ }
+ }
+ }
+ printf("SDRAM test passes\n");
+ return 0;
+}
+#endif
+
+/*************************************************************************
+ * pci_pre_init
+ *
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
+ *
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+int pci_pre_init(struct pci_controller *hose)
+{
+ unsigned long addr;
+#if 0
+ /*--------------------------------------------------------------------------+
+ * Cactus is always configured as the host & requires the
+ * PCI arbiter to be enabled ???
+ *--------------------------------------------------------------------------*/
+ unsigned long strap;
+ mfsdr(sdr_sdstp1, strap);
+ if ((strap & SDR0_SDSTP1_PAE_MASK) == 0) {
+ printf("PCI: SDR0_STRP1[PAE] not set.\n");
+ printf("PCI: Configuration aborted.\n");
+ return 0;
+ }
+#endif
+
+ /*-------------------------------------------------------------------------+
+ | Set priority for all PLB3 devices to 0.
+ | Set PLB3 arbiter to fair mode.
+ +-------------------------------------------------------------------------*/
+ mfsdr(sdr_amp1, addr);
+ mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
+ addr = mfdcr(plb3_acr);
+ mtdcr(plb3_acr, addr | 0x80000000);
+
+ /*-------------------------------------------------------------------------+
+ | Set priority for all PLB4 devices to 0.
+ +-------------------------------------------------------------------------*/
+ mfsdr(sdr_amp0, addr);
+ mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
+ addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */
+ mtdcr(plb4_acr, addr);
+
+ /*-------------------------------------------------------------------------+
+ | Set Nebula PLB4 arbiter to fair mode.
+ +-------------------------------------------------------------------------*/
+ /* Segment0 */
+ addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
+ addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
+ addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
+ addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
+ mtdcr(plb0_acr, addr);
+
+ /* Segment1 */
+ addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
+ addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
+ addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
+ addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
+ mtdcr(plb1_acr, addr);
+
+ return 1;
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+
+/*************************************************************************
+ * pci_target_init
+ *
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller *hose)
+{
+ /*--------------------------------------------------------------------------+
+ * Set up Direct MMIO registers
+ *--------------------------------------------------------------------------*/
+ /*--------------------------------------------------------------------------+
+ | PowerPC440EPX PCI Master configuration.
+ | Map one 1Gig range of PLB/processor addresses to PCI memory space.
+ | PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
+ | Use byte reversed out routines to handle endianess.
+ | Make this region non-prefetchable.
+ +--------------------------------------------------------------------------*/
+ out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
+ out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */
+ out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */
+ out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */
+
+ out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
+ out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
+ out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */
+ out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */
+
+ out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */
+ out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */
+ out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */
+ out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */
+
+ /*--------------------------------------------------------------------------+
+ * Set up Configuration registers
+ *--------------------------------------------------------------------------*/
+
+ /* Program the board's subsystem id/vendor id */
+ pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
+ CFG_PCI_SUBSYS_VENDORID);
+ pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
+
+ /* Configure command register as bus master */
+ pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
+
+ /* 240nS PCI clock */
+ pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
+
+ /* No error reporting */
+ pci_write_config_word(0, PCI_ERREN, 0);
+
+ pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
+
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+/*************************************************************************
+ * pci_master_init
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+void pci_master_init(struct pci_controller *hose)
+{
+ unsigned short temp_short;
+
+ /*--------------------------------------------------------------------------+
+ | Write the PowerPC440 EP PCI Configuration regs.
+ | Enable PowerPC440 EP to be a master on the PCI bus (PMM).
+ | Enable PowerPC440 EP to act as a PCI memory target (PTM).
+ +--------------------------------------------------------------------------*/
+ pci_read_config_word(0, PCI_COMMAND, &temp_short);
+ pci_write_config_word(0, PCI_COMMAND,
+ temp_short | PCI_COMMAND_MASTER |
+ PCI_COMMAND_MEMORY);
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+
+/*************************************************************************
+ * is_pci_host
+ *
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int is_pci_host(struct pci_controller *hose)
+{
+ /* Cactus is always configured as host. */
+ return (1);
+}
+#endif /* defined(CONFIG_PCI) */
diff --git a/board/amcc/sequoia/sequoia.h b/board/amcc/sequoia/sequoia.h
new file mode 100644
index 000000000..1d44b1646
--- /dev/null
+++ b/board/amcc/sequoia/sequoia.h
@@ -0,0 +1,67 @@
+/*
+ * (C) Copyright 2006
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2006
+ * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
+ * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+/*----------------------------------------------------------------------------+
+ | EBC Configuration Register - EBC0_CFG
+ +----------------------------------------------------------------------------*/
+/* External Bus Three-State Control */
+#define EBC0_CFG_EBTC_DRIVEN 0x80000000
+/* Device-Paced Time-out Disable */
+#define EBC0_CFG_PTD_ENABLED 0x00000000
+/* Ready Timeout Count */
+#define EBC0_CFG_RTC_MASK 0x38000000
+#define EBC0_CFG_RTC_16PERCLK 0x00000000
+#define EBC0_CFG_RTC_32PERCLK 0x08000000
+#define EBC0_CFG_RTC_64PERCLK 0x10000000
+#define EBC0_CFG_RTC_128PERCLK 0x18000000
+#define EBC0_CFG_RTC_256PERCLK 0x20000000
+#define EBC0_CFG_RTC_512PERCLK 0x28000000
+#define EBC0_CFG_RTC_1024PERCLK 0x30000000
+#define EBC0_CFG_RTC_2048PERCLK 0x38000000
+/* External Master Priority Low */
+#define EBC0_CFG_EMPL_LOW 0x00000000
+#define EBC0_CFG_EMPL_MEDIUM_LOW 0x02000000
+#define EBC0_CFG_EMPL_MEDIUM_HIGH 0x04000000
+#define EBC0_CFG_EMPL_HIGH 0x06000000
+/* External Master Priority High */
+#define EBC0_CFG_EMPH_LOW 0x00000000
+#define EBC0_CFG_EMPH_MEDIUM_LOW 0x00800000
+#define EBC0_CFG_EMPH_MEDIUM_HIGH 0x01000000
+#define EBC0_CFG_EMPH_HIGH 0x01800000
+/* Chip Select Three-State Control */
+#define EBC0_CFG_CSTC_DRIVEN 0x00400000
+/* Burst Prefetch */
+#define EBC0_CFG_BPF_ONEDW 0x00000000
+#define EBC0_CFG_BPF_TWODW 0x00100000
+#define EBC0_CFG_BPF_FOURDW 0x00200000
+/* External Master Size */
+#define EBC0_CFG_EMS_8BIT 0x00000000
+/* Power Management Enable */
+#define EBC0_CFG_PME_DISABLED 0x00000000
+#define EBC0_CFG_PME_ENABLED 0x00020000
+/* Power Management Timer */
+#define EBC0_CFG_PMT_ENCODE(n) ((((unsigned long)(n))&0x1F)<<12)
+
+#define SDR0_USB0 0x0320 /* USB Control Register */
diff --git a/board/amcc/sequoia/u-boot-nand.lds b/board/amcc/sequoia/u-boot-nand.lds
new file mode 100644
index 000000000..cf2e2b558
--- /dev/null
+++ b/board/amcc/sequoia/u-boot-nand.lds
@@ -0,0 +1,137 @@
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+
+ /* Align to next NAND block */
+ . = ALIGN(0x4000);
+ common/environment.o (.ppcenv)
+ /* Keep some space here for redundant env and potential bad env blocks */
+ . = ALIGN(0x10000);
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/amcc/sequoia/u-boot.lds b/board/amcc/sequoia/u-boot.lds
new file mode 100644
index 000000000..a423f9828
--- /dev/null
+++ b/board/amcc/sequoia/u-boot.lds
@@ -0,0 +1,145 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ .bootpg 0xFFFFF000 :
+ {
+ cpu/ppc4xx/start.o (.bootpg)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+
+ ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified.");
+
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/amcc/walnut/Makefile b/board/amcc/walnut/Makefile
index f5bda5519..e78ed5f92 100644
--- a/board/amcc/walnut/Makefile
+++ b/board/amcc/walnut/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,9 +23,13 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o
+COBJS = $(BOARD).o flash.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -38,9 +42,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/amcc/yellowstone/Makefile b/board/amcc/yellowstone/Makefile
index 47116d367..a47a0674c 100644
--- a/board/amcc/yellowstone/Makefile
+++ b/board/amcc/yellowstone/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o
+COBJS = $(BOARD).o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/amcc/yosemite/Makefile b/board/amcc/yosemite/Makefile
index 47116d367..a47a0674c 100644
--- a/board/amcc/yosemite/Makefile
+++ b/board/amcc/yosemite/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2002
+# (C) Copyright 2002-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -23,11 +23,15 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o
+COBJS = $(BOARD).o
SOBJS = init.o
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/amcc/yucca/Makefile b/board/amcc/yucca/Makefile
index c85fa3107..696fd4092 100644
--- a/board/amcc/yucca/Makefile
+++ b/board/amcc/yucca/Makefile
@@ -23,12 +23,16 @@
include $(TOPDIR)/config.mk
-LIB = lib$(BOARD).a
+LIB = $(obj)lib$(BOARD).a
-OBJS = $(BOARD).o flash.o cmd_yucca.o
+COBJS = $(BOARD).o flash.o cmd_yucca.o
SOBJS = init.o
-$(LIB): $(OBJS) $(SOBJS)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
clean:
@@ -39,9 +43,9 @@ distclean: clean
#########################################################################
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
-sinclude .depend
+sinclude $(obj).depend
#########################################################################
diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c
index af12839c2..cd175265f 100644
--- a/board/amcc/yucca/yucca.c
+++ b/board/amcc/yucca/yucca.c
@@ -32,6 +32,10 @@
#include <asm-ppc/io.h>
#include "yucca.h"
+#include "../cpu/ppc4xx/440spe_pcie.h"
+
+#undef PCIE_ENDPOINT
+/* #define PCIE_ENDPOINT 1 */
void fpga_init (void);
@@ -562,10 +566,11 @@ int checkboard (void)
static long int yucca_probe_for_dimms(void)
{
- long int dimm_installed[MAXDIMMS];
- long int dimm_num, probe_result;
- long int dimms_found = 0;
- uchar dimm_addr = IIC0_DIMM0_ADDR;
+ int dimm_installed[MAXDIMMS];
+ int dimm_num, result;
+ int dimms_found = 0;
+ uchar dimm_addr = IIC0_DIMM0_ADDR;
+ uchar dimm_spd_data[MAX_SPD_BYTES];
for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) {
/* check if there is a chip at the dimm address */
@@ -577,12 +582,28 @@ static long int yucca_probe_for_dimms(void)
dimm_addr = IIC0_DIMM1_ADDR;
break;
}
- probe_result = i2c_probe(dimm_addr);
- if (probe_result == 0) {
+ result = i2c_probe(dimm_addr);
+
+ memset(dimm_spd_data, 0, MAX_SPD_BYTES * sizeof(char));
+ if (result == 0) {
+ /* read first byte of SPD data, if there is any data */
+ result = i2c_read(dimm_addr, 0, 1, dimm_spd_data, 1);
+
+ if (result == 0) {
+ result = dimm_spd_data[0];
+ result = result > MAX_SPD_BYTES ?
+ MAX_SPD_BYTES : result;
+ result = i2c_read(dimm_addr, 0, 1,
+ dimm_spd_data, result);
+ }
+ }
+
+ if ((result == 0) &&
+ (dimm_spd_data[64] == MICRON_SPD_JEDEC_ID)) {
dimm_installed[dimm_num] = TRUE;
dimms_found++;
- debug("DIMM slot %d: DDR2 SDRAM detected\n",dimm_num);
+ debug("DIMM slot %d: DDR2 SDRAM detected\n", dimm_num);
} else {
dimm_installed[dimm_num] = FALSE;
debug("DIMM slot %d: Not populated or cannot sucessfully probe the DIMM\n", dimm_num);
@@ -1012,6 +1033,57 @@ void yucca_setup_pcie_fpga_rootpoint(int port)
out_be16((u16 *)FPGA_REG1C, reset_off | in_be16((u16 *)FPGA_REG1C));
}
+/*
+ * For the given slot, set endpoint mode, send power to the slot,
+ * turn on the green LED and turn off the yellow LED, enable the clock
+ * .In end point mode reset bit is read only.
+ */
+void yucca_setup_pcie_fpga_endpoint(int port)
+{
+ u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint;
+
+ switch(port) {
+ case 0:
+ rootpoint = FPGA_REG1C_PE0_ROOTPOINT;
+ endpoint = 0;
+ power = FPGA_REG1A_PE0_PWRON;
+ green_led = FPGA_REG1A_PE0_GLED;
+ clock = FPGA_REG1A_PE0_REFCLK_ENABLE;
+ yellow_led = FPGA_REG1A_PE0_YLED;
+ reset_off = FPGA_REG1C_PE0_PERST;
+ break;
+ case 1:
+ rootpoint = 0;
+ endpoint = FPGA_REG1C_PE1_ENDPOINT;
+ power = FPGA_REG1A_PE1_PWRON;
+ green_led = FPGA_REG1A_PE1_GLED;
+ clock = FPGA_REG1A_PE1_REFCLK_ENABLE;
+ yellow_led = FPGA_REG1A_PE1_YLED;
+ reset_off = FPGA_REG1C_PE1_PERST;
+ break;
+ case 2:
+ rootpoint = 0;
+ endpoint = FPGA_REG1C_PE2_ENDPOINT;
+ power = FPGA_REG1A_PE2_PWRON;
+ green_led = FPGA_REG1A_PE2_GLED;
+ clock = FPGA_REG1A_PE2_REFCLK_ENABLE;
+ yellow_led = FPGA_REG1A_PE2_YLED;
+ reset_off = FPGA_REG1C_PE2_PERST;
+ break;
+
+ default:
+ return;
+ }
+
+ out_be16((u16 *)FPGA_REG1A,
+ ~(power | clock | green_led) &
+ (yellow_led | in_be16((u16 *)FPGA_REG1A)));
+
+ out_be16((u16 *)FPGA_REG1C,
+ ~(rootpoint | reset_off) &
+ (endpoint | in_be16((u16 *)FPGA_REG1C)));
+}
+
static struct pci_controller pcie_hose[3] = {{0},{0},{0}};
@@ -1031,9 +1103,13 @@ void pcie_setup_hoses(void)
if (!yucca_pcie_card_present(i))
continue;
+#ifdef PCIE_ENDPOINT
+ yucca_setup_pcie_fpga_endpoint(i);
+ if (ppc440spe_init_pcie_endport(i)) {
+#else
yucca_setup_pcie_fpga_rootpoint(i);
-
if (ppc440spe_init_pcie_rootport(i)) {
+#endif
printf("PCIE%d: initialization failed\n", i);
continue;
}
@@ -1053,8 +1129,19 @@ void pcie_setup_hoses(void)
hose->region_count = 1;
pci_register_hose(hose);
- ppc440spe_setup_pcie(hose, i);
+#ifdef PCIE_ENDPOINT
+ ppc440spe_setup_pcie_endpoint(hose, i);
+ /*
+ * Reson for no scanning is endpoint can not generate
+ * upstream configuration accesses.
+ */
+#else
+ ppc440spe_setup_pcie_rootpoint(hose, i);
+ /*
+ * Config access can only go down stream
+ */
hose->last_busno = pci_hose_scan(hose);
+#endif
}
}
#endif /* defined(CONFIG_PCI) */
diff --git a/board/amcc/yucca/yucca.h b/board/amcc/yucca/yucca.h
index 66f75847d..4d13021f3 100644
--- a/board/amcc/yucca/yucca.h
+++ b/board/amcc/yucca/yucca.h
@@ -60,6 +60,9 @@ extern "C" {
#define NUM_TLB_ENTRIES 64
+/* MICRON SPD JEDEC ID Code (first byte) - SPD data byte [64] */
+#define MICRON_SPD_JEDEC_ID 0x2c
+
/*----------------------------------------------------------------------------+
| TLB specific defines.
+----------------------------------------------------------------------------*/
generated by cgit v1.2.3-70-g09d2 (git 2.51.2) at 2025-10-31 21:04:50 +0000