summaryrefslogtreecommitdiff
path: root/board/MAI/bios_emulator/glue.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/MAI/bios_emulator/glue.c')
-rw-r--r--board/MAI/bios_emulator/glue.c515
1 files changed, 0 insertions, 515 deletions
diff --git a/board/MAI/bios_emulator/glue.c b/board/MAI/bios_emulator/glue.c
deleted file mode 100644
index b380f0dfe..000000000
--- a/board/MAI/bios_emulator/glue.c
+++ /dev/null
@@ -1,515 +0,0 @@
-#include <common.h>
-#include <pci.h>
-#include <74xx_7xx.h>
-
-
-#ifdef DEBUG
-#undef DEBUG
-#endif
-
-#ifdef DEBUG
-#define PRINTF(format, args...) _printf(format , ## args)
-#else
-#define PRINTF(format, argc...)
-#endif
-
-static pci_dev_t to_pci(int bus, int devfn)
-{
- return PCI_BDF(bus, (devfn>>3), devfn&3);
-}
-
-int mypci_find_device(int vendor, int product, int index)
-{
- return pci_find_device(vendor, product, index);
-}
-
-int mypci_bus(int device)
-{
- return PCI_BUS(device);
-}
-
-int mypci_devfn(int device)
-{
- return (PCI_DEV(device)<<3) | PCI_FUNC(device);
-}
-
-
-#define mypci_read_func(type, size) \
-type mypci_read_cfg_##size##(int bus, int devfn, int offset) \
-{ \
- type c; \
- pci_read_config_##size##(to_pci(bus, devfn), offset, &c); \
- return c; \
-}
-
-#define mypci_write_func(type, size) \
-void mypci_write_cfg_##size##(int bus, int devfn, int offset, int value) \
-{ \
- pci_write_config_##size##(to_pci(bus, devfn), offset, value); \
-}
-
-mypci_read_func(u8,byte);
-mypci_read_func(u16,word);
-
-mypci_write_func(u8,byte);
-mypci_write_func(u16,word);
-
-u32 mypci_read_cfg_long(int bus, int devfn, int offset)
-{
- u32 c;
- pci_read_config_dword(to_pci(bus, devfn), offset, &c);
- return c;
-}
-
-void mypci_write_cfg_long(int bus, int devfn, int offset, int value)
-{
- pci_write_config_dword(to_pci(bus, devfn), offset, value);
-}
-
-void _printf(const char *fmt, ...)
-{
- va_list args;
- char buf[CFG_PBSIZE];
-
- va_start(args, fmt);
- (void)vsprintf(buf, fmt, args);
- va_end(args);
-
- printf(buf);
-}
-
-char *_getenv(char *name)
-{
- return getenv(name);
-}
-
-unsigned long get_bar_size(pci_dev_t dev, int offset)
-{
- u32 bar_back, bar_value;
-
- /* Save old BAR value */
- pci_read_config_dword(dev, offset, &bar_back);
-
- /* Write all 1's. */
- pci_write_config_dword(dev, offset, ~0);
-
- /* Now read back the relevant bits */
- pci_read_config_dword(dev, offset, &bar_value);
-
- /* Restore original value */
- pci_write_config_dword(dev, offset, bar_back);
-
- if (bar_value == 0) return 0xFFFFFFFF; /* This BAR is disabled */
-
- if ((bar_value & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_MEMORY)
- {
- /* This is a memory space BAR. Mask it out so we get the size of it */
- return ~(bar_value & PCI_BASE_ADDRESS_MEM_MASK) + 1;
- }
-
- /* Not suitable */
- return 0xFFFFFFFF;
-}
-
-void enable_compatibility_hole(void)
-{
- u8 cfg;
- pci_dev_t art = PCI_BDF(0,0,0);
-
- pci_read_config_byte(art, 0x54, &cfg);
- /* cfg |= 0x08; */
- cfg |= 0x20;
- pci_write_config_byte(art, 0x54, cfg);
-}
-
-void disable_compatibility_hole(void)
-{
- u8 cfg;
- pci_dev_t art = PCI_BDF(0,0,0);
-
- pci_read_config_byte(art, 0x54, &cfg);
- /* cfg &= ~0x08; */
- cfg &= ~0x20;
- pci_write_config_byte(art, 0x54, cfg);
-}
-
-void map_rom(pci_dev_t dev, u32 address)
-{
- pci_write_config_dword(dev, PCI_ROM_ADDRESS, address|PCI_ROM_ADDRESS_ENABLE);
-}
-
-void unmap_rom(pci_dev_t dev)
-{
- pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0);
-}
-
-void bat_map(u8 batnum, u32 address, u32 length)
-{
- u32 temp = address;
- address &= 0xFFFE0000;
- temp &= 0x0001FFFF;
- length = (length - 1 ) >> 17;
- length <<= 2;
-
- switch (batnum)
- {
- case 0:
- __asm volatile ("mtdbatu 0, %0" : : "r" (address | length | 3));
- __asm volatile ("mtdbatl 0, %0" : : "r" (address | 0x22));
- break;
- case 1:
- __asm volatile ("mtdbatu 1, %0" : : "r" (address | length | 3));
- __asm volatile ("mtdbatl 1, %0" : : "r" (address | 0x22));
- break;
- case 2:
- __asm volatile ("mtdbatu 2, %0" : : "r" (address | length | 3));
- __asm volatile ("mtdbatl 2, %0" : : "r" (address | 0x22));
- break;
- case 3:
- __asm volatile ("mtdbatu 3, %0" : : "r" (address | length | 3));
- __asm volatile ("mtdbatl 3, %0" : : "r" (address | 0x22));
- break;
- }
-}
-
-int find_image(u32 rom_address, u32 rom_size, void **image, u32 *image_size);
-
-int attempt_map_rom(pci_dev_t dev, void *copy_address)
-{
- u32 rom_size = 0;
- u32 rom_address = 0;
- u32 bar_size = 0;
- u32 bar_backup = 0;
- int i,j;
- void *image = 0;
- u32 image_size = 0;
- int did_correct = 0;
- u32 prefetch_addr = 0;
- u32 prefetch_size = 0;
- u32 prefetch_idx = 0;
-
- /* Get the size of the expansion rom */
- pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0xFFFFFFFF);
- pci_read_config_dword(dev, PCI_ROM_ADDRESS, &rom_size);
- if ((rom_size & 0x01) == 0)
- {
- PRINTF("No ROM\n");
- return 0;
- }
-
- rom_size &= 0xFFFFF800;
- rom_size = (~rom_size)+1;
-
- PRINTF("ROM Size is %dK\n", rom_size/1024);
-
- /*
- * Try to find a place for the ROM. We always attempt to use
- * one of the card's bases for this, as this will be in any
- * bridge's resource range as well as being free of conflicts
- * with other cards. In a graphics card it is very unlikely
- * that there won't be any base address that is large enough to
- * hold the rom.
- *
- * FIXME: To work around this, theoretically the largest base
- * could be used if none is found in the loop below.
- */
-
- for (i = PCI_BASE_ADDRESS_0; i <= PCI_BASE_ADDRESS_5; i += 4)
- {
- bar_size = get_bar_size(dev, i);
- PRINTF("PCI_BASE_ADDRESS_%d is %dK large\n",
- (i - PCI_BASE_ADDRESS_0)/4,
- bar_size/1024);
- if (bar_size != 0xFFFFFFFF && bar_size >= rom_size)
- {
- PRINTF("Found a match for rom size\n");
- pci_read_config_dword(dev, i, &rom_address);
- rom_address &= 0xFFFFFFF0;
- if (rom_address != 0 && rom_address != 0xFFFFFFF0) break;
- }
- }
-
- if (rom_address == 0 || rom_address == 0xFFFFFFF0)
- {
- PRINTF("No suitable rom address found\n");
- return 0;
- }
-
- /* Disable the BAR */
- pci_read_config_dword(dev, i, &bar_backup);
- pci_write_config_dword(dev, i, 0);
-
- /* Map ROM */
- pci_write_config_dword(dev, PCI_ROM_ADDRESS, rom_address | PCI_ROM_ADDRESS_ENABLE);
-
- /* Copy the rom to a place in the emulator space */
- PRINTF("Claiming BAT 2\n");
- bat_map(2, rom_address, rom_size);
- /* show_bat_mapping(); */
-
- if (0 == find_image(rom_address, rom_size, &image, &image_size))
- {
- PRINTF("No x86 BIOS image found\n");
- return 0;
- }
-
- PRINTF("Copying %ld bytes from 0x%lx to 0x%lx\n", (long)image_size, (long)image, (long)copy_address);
-
- /* memcpy(copy_address, rom_address, rom_size); */
- {
- unsigned char *from = (unsigned char *)image; /* rom_address; */
- unsigned char *to = (unsigned char *)copy_address;
- for (j=0; j<image_size /*rom_size*/; j++)
- {
- *to++ = *from++;
- }
- }
-
- PRINTF("Copy is done\n");
-
- /* Unmap the ROM and restore the BAR */
- pci_write_config_dword(dev, PCI_ROM_ADDRESS, 0);
- pci_write_config_dword(dev, i, bar_backup);
-
- /* FIXME: Shouldn't be needed anymore*/
- /* bat_map(2, 0x80000000, 256*1024*1024);
- show_bat_mapping(); */
-
- /*
- * Since most cards can probably only do 16 bit IO addressing, we
- * correct their IO base into an appropriate value.
- * This should do for most.
- */
- for (i = PCI_BASE_ADDRESS_0; i <= PCI_BASE_ADDRESS_5; i += 4)
- {
- unsigned long value;
- pci_read_config_dword(dev, i, &value);
- if (value & 0x01) /* IO */
- {
- did_correct = 1;
- pci_write_config_dword(dev, i, 0x1001);
- break;
- }
-
- if (value & PCI_BASE_ADDRESS_MEM_PREFETCH)
- {
- prefetch_idx = i;
- prefetch_addr = value & PCI_BASE_ADDRESS_MEM_MASK;
- prefetch_size = get_bar_size(dev, i);
- }
- }
-
- if (1) /* did_correct) */
- {
- extern pci_dev_t pci_find_bridge_for_bus(struct pci_controller *hose, int busnr);
- int busnr = PCI_BUS(dev);
- if (busnr)
- {
- pci_dev_t bridge;
- PRINTF("Need to correct bridge device for IO range change\n");
- bridge = pci_find_bridge_for_bus(NULL, busnr);
- if (bridge == PCI_ANY_ID)
- {
- PRINTF("Didn't find bridge. Hope that's OK\n");
- }
- else
- {
- /*
- * Set upper I/O base/limit to 0
- */
- pci_write_config_byte(bridge, 0x30, 0x00);
- pci_write_config_byte(bridge, 0x31, 0x00);
- pci_write_config_byte(bridge, 0x32, 0x00);
- pci_write_config_byte(bridge, 0x33, 0x00);
- if (did_correct)
- {
- /*
- * set lower I/O base to 1000
- * That is, bits 0:3 are set to 0001 by default.
- * bits 7:4 contain I/O address bits 15:12
- * all others are assumed 0.
- */
- pci_write_config_byte(bridge, 0x1C, 0x11);
- /*
- * Set lower I/O limit to 1FFF
- * That is, bits 0:3 are reserved and always 0000
- * Bits 7:4 contain I/O address bits 15:12
- * All others are assumed F.
- */
- pci_write_config_byte(bridge, 0x1D, 0x10);
- pci_write_config_byte(bridge, 0x0D, 0x20);
- PRINTF("Corrected bridge resource range of bridge at %02x:%02x:%02x\n",
- PCI_BUS(bridge), PCI_DEV(bridge), PCI_FUNC(bridge));
-
- }
- else
- {
- /*
- * This card doesn't have I/O, we disable I/O forwarding
- */
- pci_write_config_byte(bridge, 0x1C, 0x11);
- pci_write_config_byte(bridge, 0x1D, 0x00);
- pci_write_config_byte(bridge, PCI_INTERRUPT_LINE, 0);
- pci_write_config_byte(bridge, PCI_INTERRUPT_PIN, 0);
- pci_write_config_dword(bridge, PCI_COMMAND, PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_IO);
- PRINTF("Disabled bridge resource range of bridge at %02x:%02x:%02x\n",
- PCI_BUS(bridge), PCI_DEV(bridge), PCI_FUNC(bridge));
-
- }
- }
- /*
- * Correct the prefetchable memory base, which is not set correctly by
- * the U-Boot autoconfig stuff
- */
- if (prefetch_idx)
- {
-/* PRINTF("Setting prefetchable range to %x, %x (%x and %x)\n", */
-/* prefetch_addr, prefetch_addr+prefetch_size, */
-/* prefetch_addr>>16, (prefetch_addr+prefetch_size)>>16); */
-/* pci_write_config_word(bridge, PCI_PREF_MEMORY_BASE, (prefetch_addr>>16)); */
-/* pci_write_config_word(bridge, PCI_PREF_MEMORY_LIMIT, (prefetch_addr+prefetch_size)>>16); */
- }
-
- pci_write_config_word(bridge, PCI_PREF_MEMORY_BASE, 0x1000);
- pci_write_config_word(bridge, PCI_PREF_MEMORY_LIMIT, 0x0000);
-
- pci_write_config_byte(bridge, 0xD0, 0x0A);
- pci_write_config_byte(bridge, 0xD3, 0x04);
-
- /*
- * Set the interrupt pin to 0
- */
-#if 0
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 0);
- pci_write_config_byte(dev, PCI_INTERRUPT_PIN, 0);
-#endif
- pci_write_config_byte(bridge, PCI_INTERRUPT_LINE, 0);
- pci_write_config_byte(bridge, PCI_INTERRUPT_PIN, 0);
-
- }
- }
-
- /* Finally, enable the card's IO and memory response */
- pci_write_config_dword(dev, PCI_COMMAND, PCI_COMMAND_MEMORY | PCI_COMMAND_IO);
- pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0);
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0);
-
- return 1;
-}
-
-int find_image(u32 rom_address, u32 rom_size, void **image, u32 *image_size)
-{
- int i = 0;
- unsigned char *rom = (unsigned char *)rom_address;
- /* if (*rom != 0x55 || *(rom+1) != 0xAA) return 0; /* No bios rom this is, yes. */ */
-
- for (;;)
- {
- unsigned short pci_data_offset = *(rom+0x18) + 256 * *(rom+0x19);
- unsigned short pci_image_length = (*(rom+pci_data_offset+0x10) + 256 * *(rom+pci_data_offset+0x11)) * 512;
- unsigned char pci_image_type = *(rom+pci_data_offset+0x14);
- if (*rom != 0x55 || *(rom+1) != 0xAA)
- {
- PRINTF("Invalid header this is\n");
- return 0;
- }
- PRINTF("Image %i: Type %d (%s)\n", i++, pci_image_type,
- pci_image_type==0 ? "x86" :
- pci_image_type==1 ? "OpenFirmware" :
- "Unknown");
- if (pci_image_type == 0)
- {
- *image = rom;
- *image_size = pci_image_length;
- return 1;
- }
-
- if (*(rom+pci_data_offset+0x15) & 0x80)
- {
- PRINTF("LAST image encountered, no image found\n");
- return 0;
- }
-
- rom += pci_image_length;
- }
-}
-
-void show_bat_mapping(void)
-{
- u32 dbat0u, dbat0l, ibat0u, ibat0l;
- u32 dbat1u, dbat1l, ibat1u, ibat1l;
- u32 dbat2u, dbat2l, ibat2u, ibat2l;
- u32 dbat3u, dbat3l, ibat3u, ibat3l;
- u32 msr, hid0, l2cr_reg;
-
- __asm volatile ("mfdbatu %0,0" : "=r" (dbat0u));
- __asm volatile ("mfdbatl %0,0" : "=r" (dbat0l));
- __asm volatile ("mfibatu %0,0" : "=r" (ibat0u));
- __asm volatile ("mfibatl %0,0" : "=r" (ibat0l));
-
- __asm volatile ("mfdbatu %0,1" : "=r" (dbat1u));
- __asm volatile ("mfdbatl %0,1" : "=r" (dbat1l));
- __asm volatile ("mfibatu %0,1" : "=r" (ibat1u));
- __asm volatile ("mfibatl %0,1" : "=r" (ibat1l));
-
- __asm volatile ("mfdbatu %0,2" : "=r" (dbat2u));
- __asm volatile ("mfdbatl %0,2" : "=r" (dbat2l));
- __asm volatile ("mfibatu %0,2" : "=r" (ibat2u));
- __asm volatile ("mfibatl %0,2" : "=r" (ibat2l));
-
- __asm volatile ("mfdbatu %0,3" : "=r" (dbat3u));
- __asm volatile ("mfdbatl %0,3" : "=r" (dbat3l));
- __asm volatile ("mfibatu %0,3" : "=r" (ibat3u));
- __asm volatile ("mfibatl %0,3" : "=r" (ibat3l));
-
- __asm volatile ("mfmsr %0" : "=r" (msr));
- __asm volatile ("mfspr %0,1008": "=r" (hid0));
- __asm volatile ("mfspr %0,1017": "=r" (l2cr_reg));
-
- printf("dbat0u: %08x dbat0l: %08x ibat0u: %08x ibat0l: %08x\n",
- dbat0u, dbat0l, ibat0u, ibat0l);
- printf("dbat1u: %08x dbat1l: %08x ibat1u: %08x ibat1l: %08x\n",
- dbat1u, dbat1l, ibat1u, ibat1l);
- printf("dbat2u: %08x dbat2l: %08x ibat2u: %08x ibat2l: %08x\n",
- dbat2u, dbat2l, ibat2u, ibat2l);
- printf("dbat3u: %08x dbat3l: %08x ibat3u: %08x ibat3l: %08x\n",
- dbat3u, dbat3l, ibat3u, ibat3l);
-
- printf("\nMSR: %08x HID0: %08x L2CR: %08x \n", msr,hid0, l2cr_reg);
-}
-
-
-void remove_init_data(void)
-{
- char *s;
-
- /* Invalidate and disable data cache */
- invalidate_l1_data_cache();
- dcache_disable();
-
- s = getenv("x86_cache");
-
- if (!s)
- {
- icache_enable();
- dcache_enable();
- }
- else if (s)
- {
- if (strcmp(s, "dcache")==0)
- {
- dcache_enable();
- }
- else if (strcmp(s, "icache") == 0)
- {
- icache_enable();
- }
- else if (strcmp(s, "on")== 0 || strcmp(s, "both") == 0)
- {
- dcache_enable();
- icache_enable();
- }
- }
-
- /* show_bat_mapping();*/
-}
generated by cgit v1.2.3-70-g09d2 (git 2.51.2) at 2025-10-31 00:37:42 +0000