13 files changed, 403 insertions, 714 deletions

diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index 50ddb5040..ef7637a49 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -29,48 +29,6 @@ obj-$(CONFIG_MP)	+= release.o
 obj-$(CONFIG_CMD_ERRATA) += cmd_errata.o
 obj-$(CONFIG_CPM2)	+= commproc.o
 
-# supports ddr1
-obj-$(CONFIG_MPC8540) += ddr-gen1.o
-obj-$(CONFIG_MPC8560) += ddr-gen1.o
-obj-$(CONFIG_MPC8541) += ddr-gen1.o
-obj-$(CONFIG_MPC8555) += ddr-gen1.o
-
-# supports ddr1/2
-obj-$(CONFIG_MPC8548) += ddr-gen2.o
-obj-$(CONFIG_MPC8568) += ddr-gen2.o
-obj-$(CONFIG_MPC8544) += ddr-gen2.o
-
-# supports ddr1/2/3
-obj-$(CONFIG_PPC_C29X)	+= ddr-gen3.o
-obj-$(CONFIG_MPC8572) += ddr-gen3.o
-obj-$(CONFIG_MPC8536) += ddr-gen3.o
-obj-$(CONFIG_MPC8569)	+= ddr-gen3.o
-obj-$(CONFIG_P1010)	+= ddr-gen3.o
-obj-$(CONFIG_P1011)	+= ddr-gen3.o
-obj-$(CONFIG_P1012)	+= ddr-gen3.o
-obj-$(CONFIG_P1013)	+= ddr-gen3.o
-obj-$(CONFIG_P1014)	+= ddr-gen3.o
-obj-$(CONFIG_P1020)	+= ddr-gen3.o
-obj-$(CONFIG_P1021)	+= ddr-gen3.o
-obj-$(CONFIG_P1022)	+= ddr-gen3.o
-obj-$(CONFIG_P1023)	+= ddr-gen3.o
-obj-$(CONFIG_P1024)	+= ddr-gen3.o
-obj-$(CONFIG_P1025)	+= ddr-gen3.o
-obj-$(CONFIG_P2010)	+= ddr-gen3.o
-obj-$(CONFIG_P2020)	+= ddr-gen3.o
-obj-$(CONFIG_PPC_P2041)	+= ddr-gen3.o
-obj-$(CONFIG_PPC_P3041)	+= ddr-gen3.o
-obj-$(CONFIG_PPC_P4080)	+= ddr-gen3.o
-obj-$(CONFIG_PPC_P5020)	+= ddr-gen3.o
-obj-$(CONFIG_PPC_P5040)	+= ddr-gen3.o
-obj-$(CONFIG_PPC_T4240)	+= ddr-gen3.o
-obj-$(CONFIG_PPC_T4160)	+= ddr-gen3.o
-obj-$(CONFIG_PPC_B4420)	+= ddr-gen3.o
-obj-$(CONFIG_PPC_B4860)	+= ddr-gen3.o
-obj-$(CONFIG_BSC9131)		+= ddr-gen3.o
-obj-$(CONFIG_BSC9132)		+= ddr-gen3.o
-obj-$(CONFIG_PPC_T1040)	+= ddr-gen3.o
-
 obj-$(CONFIG_CPM2)	+= ether_fcc.o
 obj-$(CONFIG_OF_LIBFDT) += fdt.o
 obj-$(CONFIG_FSL_CORENET) += liodn.o
@@ -89,6 +47,12 @@ obj-$(CONFIG_PPC_T4160) += t4240_ids.o
 obj-$(CONFIG_PPC_B4420) += b4860_ids.o
 obj-$(CONFIG_PPC_B4860) += b4860_ids.o
 obj-$(CONFIG_PPC_T1040) += t1040_ids.o
+obj-$(CONFIG_PPC_T1042)	+= t1040_ids.o
+obj-$(CONFIG_PPC_T1020)	+= t1040_ids.o
+obj-$(CONFIG_PPC_T1022)	+= t1040_ids.o
+obj-$(CONFIG_PPC_T2080) += t2080_ids.o
+obj-$(CONFIG_PPC_T2081) += t2080_ids.o
+
 
 obj-$(CONFIG_QE)	+= qe_io.o
 obj-$(CONFIG_CPM2)	+= serial_scc.o
@@ -128,6 +92,11 @@ obj-$(CONFIG_PPC_B4420) += b4860_serdes.o
 obj-$(CONFIG_PPC_B4860) += b4860_serdes.o
 obj-$(CONFIG_BSC9132) += bsc9132_serdes.o
 obj-$(CONFIG_PPC_T1040) += t1040_serdes.o
+obj-$(CONFIG_PPC_T1042)	+= t1040_serdes.o
+obj-$(CONFIG_PPC_T1020)	+= t1040_serdes.o
+obj-$(CONFIG_PPC_T1022)	+= t1040_serdes.o
+obj-$(CONFIG_PPC_T2080) += t2080_serdes.o
+obj-$(CONFIG_PPC_T2081) += t2080_serdes.o
 
 obj-y	+= cpu.o
 obj-y	+= cpu_init.o
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index 1a0196c7c..3e99b079c 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -17,12 +17,12 @@
 #include <asm/cache.h>
 #include <asm/io.h>
 #include <asm/mmu.h>
-#include <asm/fsl_ifc.h>
+#include <fsl_ifc.h>
 #include <asm/fsl_law.h>
 #include <asm/fsl_lbc.h>
 #include <post.h>
 #include <asm/processor.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -416,7 +416,7 @@ static void dump_spd_ddr_reg(void)
 	int i, j, k, m;
 	u8 *p_8;
 	u32 *p_32;
-	ccsr_ddr_t *ddr[CONFIG_NUM_DDR_CONTROLLERS];
+	struct ccsr_ddr __iomem *ddr[CONFIG_NUM_DDR_CONTROLLERS];
 	generic_spd_eeprom_t
 		spd[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR];
 
@@ -453,21 +453,21 @@ static void dump_spd_ddr_reg(void)
 	for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
 		switch (i) {
 		case 0:
-			ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
+			ddr[i] = (void *)CONFIG_SYS_FSL_DDR_ADDR;
 			break;
-#if defined(CONFIG_SYS_MPC8xxx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
+#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
 		case 1:
-			ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR;
+			ddr[i] = (void *)CONFIG_SYS_FSL_DDR2_ADDR;
 			break;
 #endif
-#if defined(CONFIG_SYS_MPC8xxx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
+#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
 		case 2:
-			ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR3_ADDR;
+			ddr[i] = (void *)CONFIG_SYS_FSL_DDR3_ADDR;
 			break;
 #endif
-#if defined(CONFIG_SYS_MPC8xxx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
+#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
 		case 3:
-			ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR4_ADDR;
+			ddr[i] = (void *)CONFIG_SYS_FSL_DDR4_ADDR;
 			break;
 #endif
 		default:
@@ -482,7 +482,7 @@ static void dump_spd_ddr_reg(void)
 	for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
 		printf("     Base + 0x%04x", (u32)ddr[i] & 0xFFFF);
 	puts("\n");
-	for (k = 0; k < sizeof(ccsr_ddr_t)/4; k++) {
+	for (k = 0; k < sizeof(struct ccsr_ddr)/4; k++) {
 		m = 0;
 		printf("%6d (0x%04x)", k * 4, k * 4);
 		for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen1.c b/arch/powerpc/cpu/mpc85xx/ddr-gen1.c
deleted file mode 100644
index 4dd8c0b5b..000000000
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen1.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
-#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
-#endif
-
-void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
-			     unsigned int ctrl_num, int step)
-{
-	unsigned int i;
-	volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
-
-	if (ctrl_num != 0) {
-		printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
-		return;
-	}
-
-	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
-		if (i == 0) {
-			out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
-			out_be32(&ddr->cs0_config, regs->cs[i].config);
-
-		} else if (i == 1) {
-			out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
-			out_be32(&ddr->cs1_config, regs->cs[i].config);
-
-		} else if (i == 2) {
-			out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
-			out_be32(&ddr->cs2_config, regs->cs[i].config);
-
-		} else if (i == 3) {
-			out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
-			out_be32(&ddr->cs3_config, regs->cs[i].config);
-		}
-	}
-
-	out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
-	out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
-	out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
-	out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
-#if defined(CONFIG_MPC8555) || defined(CONFIG_MPC8541)
-	out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
-#endif
-
-	/*
-	 * 200 painful micro-seconds must elapse between
-	 * the DDR clock setup and the DDR config enable.
-	 */
-	udelay(200);
-	asm volatile("sync;isync");
-
-	out_be32(&ddr->sdram_cfg, regs->ddr_sdram_cfg);
-
-	asm("sync;isync;msync");
-	udelay(500);
-}
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-/*
- * Initialize all of memory for ECC, then enable errors.
- */
-
-void
-ddr_enable_ecc(unsigned int dram_size)
-{
-	volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR);
-
-	dma_meminit(CONFIG_MEM_INIT_VALUE, dram_size);
-
-	/*
-	 * Enable errors for ECC.
-	 */
-	debug("DMA DDR: err_disable = 0x%08x\n", ddr->err_disable);
-	ddr->err_disable = 0x00000000;
-	asm("sync;isync;msync");
-	debug("DMA DDR: err_disable = 0x%08x\n", ddr->err_disable);
-}
-
-#endif	/* CONFIG_DDR_ECC  && ! CONFIG_ECC_INIT_VIA_DDRCONTROLLER */
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c b/arch/powerpc/cpu/mpc85xx/ddr-gen2.c
deleted file mode 100644
index 542bc84ac..000000000
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- * Copyright 2008-2011 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
-#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
-#endif
-
-void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
-			     unsigned int ctrl_num, int step)
-{
-	unsigned int i;
-	ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
-
-#if defined(CONFIG_SYS_FSL_ERRATUM_NMG_DDR120) && defined(CONFIG_MPC85xx)
-	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-	uint svr;
-#endif
-
-	if (ctrl_num) {
-		printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
-		return;
-	}
-
-#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_DDR120
-	/*
-	 * Set the DDR IO receiver to an acceptable bias point.
-	 * Fixed in Rev 2.1.
-	 */
-	svr = get_svr();
-	if ((SVR_MAJ(svr) == 1) || IS_SVR_REV(svr, 2, 0)) {
-		if ((regs->ddr_sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) ==
-		   SDRAM_CFG_SDRAM_TYPE_DDR2)
-			out_be32(&gur->ddrioovcr, 0x90000000);
-		else
-			out_be32(&gur->ddrioovcr, 0xA8000000);
-	}
-#endif
-
-	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
-		if (i == 0) {
-			out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
-			out_be32(&ddr->cs0_config, regs->cs[i].config);
-
-		} else if (i == 1) {
-			out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
-			out_be32(&ddr->cs1_config, regs->cs[i].config);
-
-		} else if (i == 2) {
-			out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
-			out_be32(&ddr->cs2_config, regs->cs[i].config);
-
-		} else if (i == 3) {
-			out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
-			out_be32(&ddr->cs3_config, regs->cs[i].config);
-		}
-	}
-
-	out_be32(&ddr->timing_cfg_3, regs->timing_cfg_3);
-	out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
-	out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
-	out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
-	out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
-	out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
-	out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
-	out_be32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl);
-	out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
-	out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
-	out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
-	out_be32(&ddr->init_addr, regs->ddr_init_addr);
-	out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
-
-	/*
-	 * 200 painful micro-seconds must elapse between
-	 * the DDR clock setup and the DDR config enable.
-	 */
-	udelay(200);
-	asm volatile("sync;isync");
-
-	out_be32(&ddr->sdram_cfg, regs->ddr_sdram_cfg);
-
-	/* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done.  */
-	while (in_be32(&ddr->sdram_cfg_2) & 0x10) {
-		udelay(10000);		/* throttle polling rate */
-	}
-}
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
deleted file mode 100644
index 1be51d330..000000000
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
+++ /dev/null
@@ -1,464 +0,0 @@
-/*
- * Copyright 2008-2012 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/processor.h>
-
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
-#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
-#endif
-
-
-/*
- * regs has the to-be-set values for DDR controller registers
- * ctrl_num is the DDR controller number
- * step: 0 goes through the initialization in one pass
- *       1 sets registers and returns before enabling controller
- *       2 resumes from step 1 and continues to initialize
- * Dividing the initialization to two steps to deassert DDR reset signal
- * to comply with JEDEC specs for RDIMMs.
- */
-void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
-			     unsigned int ctrl_num, int step)
-{
-	unsigned int i, bus_width;
-	volatile ccsr_ddr_t *ddr;
-	u32 temp_sdram_cfg;
-	u32 total_gb_size_per_controller;
-	int timeout;
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
-	int timeout_save;
-	volatile ccsr_local_ecm_t *ecm = (void *)CONFIG_SYS_MPC85xx_ECM_ADDR;
-	unsigned int csn_bnds_backup = 0, cs_sa, cs_ea, *csn_bnds_t;
-	int csn = -1;
-#endif
-
-	switch (ctrl_num) {
-	case 0:
-		ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
-		break;
-#if defined(CONFIG_SYS_MPC8xxx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
-	case 1:
-		ddr = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR;
-		break;
-#endif
-#if defined(CONFIG_SYS_MPC8xxx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
-	case 2:
-		ddr = (void *)CONFIG_SYS_MPC8xxx_DDR3_ADDR;
-		break;
-#endif
-#if defined(CONFIG_SYS_MPC8xxx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
-	case 3:
-		ddr = (void *)CONFIG_SYS_MPC8xxx_DDR4_ADDR;
-		break;
-#endif
-	default:
-		printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
-		return;
-	}
-
-	if (step == 2)
-		goto step2;
-
-	if (regs->ddr_eor)
-		out_be32(&ddr->eor, regs->ddr_eor);
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
-	debug("Workaround for ERRATUM_DDR111_DDR134\n");
-	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
-		cs_sa = (regs->cs[i].bnds >> 16) & 0xfff;
-		cs_ea = regs->cs[i].bnds & 0xfff;
-		if ((cs_sa <= 0xff) && (cs_ea >= 0xff)) {
-			csn = i;
-			csn_bnds_backup = regs->cs[i].bnds;
-			csn_bnds_t = (unsigned int *) &regs->cs[i].bnds;
-			if (cs_ea > 0xeff)
-				*csn_bnds_t = regs->cs[i].bnds + 0x01000000;
-			else
-				*csn_bnds_t = regs->cs[i].bnds + 0x01000100;
-			debug("Found cs%d_bns (0x%08x) covering 0xff000000, "
-				"change it to 0x%x\n",
-				csn, csn_bnds_backup, regs->cs[i].bnds);
-			break;
-		}
-	}
-#endif
-	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
-		if (i == 0) {
-			out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
-			out_be32(&ddr->cs0_config, regs->cs[i].config);
-			out_be32(&ddr->cs0_config_2, regs->cs[i].config_2);
-
-		} else if (i == 1) {
-			out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
-			out_be32(&ddr->cs1_config, regs->cs[i].config);
-			out_be32(&ddr->cs1_config_2, regs->cs[i].config_2);
-
-		} else if (i == 2) {
-			out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
-			out_be32(&ddr->cs2_config, regs->cs[i].config);
-			out_be32(&ddr->cs2_config_2, regs->cs[i].config_2);
-
-		} else if (i == 3) {
-			out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
-			out_be32(&ddr->cs3_config, regs->cs[i].config);
-			out_be32(&ddr->cs3_config_2, regs->cs[i].config_2);
-		}
-	}
-
-	out_be32(&ddr->timing_cfg_3, regs->timing_cfg_3);
-	out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
-	out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
-	out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
-	out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
-	out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
-	out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
-	out_be32(&ddr->sdram_mode_3, regs->ddr_sdram_mode_3);
-	out_be32(&ddr->sdram_mode_4, regs->ddr_sdram_mode_4);
-	out_be32(&ddr->sdram_mode_5, regs->ddr_sdram_mode_5);
-	out_be32(&ddr->sdram_mode_6, regs->ddr_sdram_mode_6);
-	out_be32(&ddr->sdram_mode_7, regs->ddr_sdram_mode_7);
-	out_be32(&ddr->sdram_mode_8, regs->ddr_sdram_mode_8);
-	out_be32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl);
-	out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
-	out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
-	out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
-	out_be32(&ddr->init_addr, regs->ddr_init_addr);
-	out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
-
-	out_be32(&ddr->timing_cfg_4, regs->timing_cfg_4);
-	out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5);
-	out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
-	out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
-#ifndef CONFIG_SYS_FSL_DDR_EMU
-	/*
-	 * Skip these two registers if running on emulator
-	 * because emulator doesn't have skew between bytes.
-	 */
-
-	if (regs->ddr_wrlvl_cntl_2)
-		out_be32(&ddr->ddr_wrlvl_cntl_2, regs->ddr_wrlvl_cntl_2);
-	if (regs->ddr_wrlvl_cntl_3)
-		out_be32(&ddr->ddr_wrlvl_cntl_3, regs->ddr_wrlvl_cntl_3);
-#endif
-
-	out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr);
-	out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
-	out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
-	out_be32(&ddr->ddr_cdr1, regs->ddr_cdr1);
-	out_be32(&ddr->ddr_cdr2, regs->ddr_cdr2);
-	out_be32(&ddr->err_disable, regs->err_disable);
-	out_be32(&ddr->err_int_en, regs->err_int_en);
-	for (i = 0; i < 32; i++) {
-		if (regs->debug[i]) {
-			debug("Write to debug_%d as %08x\n", i+1, regs->debug[i]);
-			out_be32(&ddr->debug[i], regs->debug[i]);
-		}
-	}
-#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934
-	out_be32(&ddr->debug[28], 0x30003000);
-#endif
-
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003474
-	out_be32(&ddr->debug[12], 0x00000015);
-	out_be32(&ddr->debug[21], 0x24000000);
-#endif /* CONFIG_SYS_FSL_ERRATUM_DDR_A003474 */
-
-	/*
-	 * For RDIMMs, JEDEC spec requires clocks to be stable before reset is
-	 * deasserted. Clocks start when any chip select is enabled and clock
-	 * control register is set. Because all DDR components are connected to
-	 * one reset signal, this needs to be done in two steps. Step 1 is to
-	 * get the clocks started. Step 2 resumes after reset signal is
-	 * deasserted.
-	 */
-	if (step == 1) {
-		udelay(200);
-		return;
-	}
-
-step2:
-	/* Set, but do not enable the memory */
-	temp_sdram_cfg = regs->ddr_sdram_cfg;
-	temp_sdram_cfg &= ~(SDRAM_CFG_MEM_EN);
-	out_be32(&ddr->sdram_cfg, temp_sdram_cfg);
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003
-	debug("Workaround for ERRATUM_DDR_A003\n");
-	if (regs->ddr_sdram_rcw_2 & 0x00f00000) {
-		out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2 & 0xf07fffff);
-		out_be32(&ddr->debug[2], 0x00000400);
-		out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl & 0x7fffffff);
-		out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl & 0x7fffffff);
-		out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2 & 0xffffffeb);
-		out_be32(&ddr->mtcr, 0);
-		out_be32(&ddr->debug[12], 0x00000015);
-		out_be32(&ddr->debug[21], 0x24000000);
-		out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval & 0xffff);
-		out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_BI | SDRAM_CFG_MEM_EN);
-
-		asm volatile("sync;isync");
-		while (!(in_be32(&ddr->debug[1]) & 0x2))
-			;
-
-		switch (regs->ddr_sdram_rcw_2 & 0x00f00000) {
-		case 0x00000000:
-			out_be32(&ddr->sdram_md_cntl,
-				MD_CNTL_MD_EN		|
-				MD_CNTL_CS_SEL_CS0_CS1	|
-				0x04000000		|
-				MD_CNTL_WRCW		|
-				MD_CNTL_MD_VALUE(0x02));
-			break;
-		case 0x00100000:
-			out_be32(&ddr->sdram_md_cntl,
-				MD_CNTL_MD_EN		|
-				MD_CNTL_CS_SEL_CS0_CS1	|
-				0x04000000		|
-				MD_CNTL_WRCW		|
-				MD_CNTL_MD_VALUE(0x0a));
-			break;
-		case 0x00200000:
-			out_be32(&ddr->sdram_md_cntl,
-				MD_CNTL_MD_EN		|
-				MD_CNTL_CS_SEL_CS0_CS1	|
-				0x04000000		|
-				MD_CNTL_WRCW		|
-				MD_CNTL_MD_VALUE(0x12));
-			break;
-		case 0x00300000:
-			out_be32(&ddr->sdram_md_cntl,
-				MD_CNTL_MD_EN		|
-				MD_CNTL_CS_SEL_CS0_CS1	|
-				0x04000000		|
-				MD_CNTL_WRCW		|
-				MD_CNTL_MD_VALUE(0x1a));
-			break;
-		default:
-			out_be32(&ddr->sdram_md_cntl,
-				MD_CNTL_MD_EN		|
-				MD_CNTL_CS_SEL_CS0_CS1	|
-				0x04000000		|
-				MD_CNTL_WRCW		|
-				MD_CNTL_MD_VALUE(0x02));
-			printf("Unsupported RC10\n");
-			break;
-		}
-
-		while (in_be32(&ddr->sdram_md_cntl) & 0x80000000)
-			;
-		udelay(6);
-		out_be32(&ddr->sdram_cfg, temp_sdram_cfg);
-		out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
-		out_be32(&ddr->debug[2], 0x0);
-		out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
-		out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
-		out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
-		out_be32(&ddr->debug[12], 0x0);
-		out_be32(&ddr->debug[21], 0x0);
-		out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
-
-	}
-#endif
-	/*
-	 * For 8572 DDR1 erratum - DDR controller may enter illegal state
-	 * when operatiing in 32-bit bus mode with 4-beat bursts,
-	 * This erratum does not affect DDR3 mode, only for DDR2 mode.
-	 */
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_115
-	debug("Workaround for ERRATUM_DDR_115\n");
-	if ((((in_be32(&ddr->sdram_cfg) >> 24) & 0x7) == SDRAM_TYPE_DDR2)
-	    && in_be32(&ddr->sdram_cfg) & 0x80000) {
-		/* set DEBUG_1[31] */
-		setbits_be32(&ddr->debug[0], 1);
-	}
-#endif
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
-	debug("Workaround for ERRATUM_DDR111_DDR134\n");
-	/*
-	 * This is the combined workaround for DDR111 and DDR134
-	 * following the published errata for MPC8572
-	 */
-
-	/* 1. Set EEBACR[3] */
-	setbits_be32(&ecm->eebacr, 0x10000000);
-	debug("Setting EEBACR[3] to 0x%08x\n", in_be32(&ecm->eebacr));
-
-	/* 2. Set DINIT in SDRAM_CFG_2*/
-	setbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_D_INIT);
-	debug("Setting sdram_cfg_2[D_INIT] to 0x%08x\n",
-		in_be32(&ddr->sdram_cfg_2));
-
-	/* 3. Set DEBUG_3[21] */
-	setbits_be32(&ddr->debug[2], 0x400);
-	debug("Setting DEBUG_3[21] to 0x%08x\n", in_be32(&ddr->debug[2]));
-
-#endif	/* part 1 of the workaound */
-
-	/*
-	 * 500 painful micro-seconds must elapse between
-	 * the DDR clock setup and the DDR config enable.
-	 * DDR2 need 200 us, and DDR3 need 500 us from spec,
-	 * we choose the max, that is 500 us for all of case.
-	 */
-	udelay(500);
-	asm volatile("sync;isync");
-
-	/* Let the controller go */
-	temp_sdram_cfg = in_be32(&ddr->sdram_cfg) & ~SDRAM_CFG_BI;
-	out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
-	asm volatile("sync;isync");
-
-	total_gb_size_per_controller = 0;
-	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
-		if (!(regs->cs[i].config & 0x80000000))
-			continue;
-		total_gb_size_per_controller += 1 << (
-			((regs->cs[i].config >> 14) & 0x3) + 2 +
-			((regs->cs[i].config >> 8) & 0x7) + 12 +
-			((regs->cs[i].config >> 0) & 0x7) + 8 +
-			3 - ((regs->ddr_sdram_cfg >> 19) & 0x3) -
-			26);			/* minus 26 (count of 64M) */
-	}
-	if (fsl_ddr_get_intl3r() & 0x80000000)	/* 3-way interleaving */
-		total_gb_size_per_controller *= 3;
-	else if (regs->cs[0].config & 0x20000000) /* 2-way interleaving */
-		total_gb_size_per_controller <<= 1;
-	/*
-	 * total memory / bus width = transactions needed
-	 * transactions needed / data rate = seconds
-	 * to add plenty of buffer, double the time
-	 * For example, 2GB on 666MT/s 64-bit bus takes about 402ms
-	 * Let's wait for 800ms
-	 */
-	bus_width = 3 - ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK)
-			>> SDRAM_CFG_DBW_SHIFT);
-	timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 /
-		(get_ddr_freq(0) >> 20)) << 1;
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
-	timeout_save = timeout;
-#endif
-	total_gb_size_per_controller >>= 4;	/* shift down to gb size */
-	debug("total %d GB\n", total_gb_size_per_controller);
-	debug("Need to wait up to %d * 10ms\n", timeout);
-
-	/* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done.  */
-	while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) &&
-		(timeout >= 0)) {
-		udelay(10000);		/* throttle polling rate */
-		timeout--;
-	}
-
-	if (timeout <= 0)
-		printf("Waiting for D_INIT timeout. Memory may not work.\n");
-
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
-	/* continue this workaround */
-
-	/* 4. Clear DEBUG3[21] */
-	clrbits_be32(&ddr->debug[2], 0x400);
-	debug("Clearing D3[21] to 0x%08x\n", in_be32(&ddr->debug[2]));
-
-	/* DDR134 workaround starts */
-	/* A: Clear sdram_cfg_2[odt_cfg] */
-	clrbits_be32(&ddr->sdram_cfg_2, SDRAM_CFG2_ODT_CFG_MASK);
-	debug("Clearing SDRAM_CFG2[ODT_CFG] to 0x%08x\n",
-		in_be32(&ddr->sdram_cfg_2));
-
-	/* B: Set DEBUG1[15] */
-	setbits_be32(&ddr->debug[0], 0x10000);
-	debug("Setting D1[15] to 0x%08x\n", in_be32(&ddr->debug[0]));
-
-	/* C: Set timing_cfg_2[cpo] to 0b11111 */
-	setbits_be32(&ddr->timing_cfg_2, TIMING_CFG_2_CPO_MASK);
-	debug("Setting TMING_CFG_2[CPO] to 0x%08x\n",
-		in_be32(&ddr->timing_cfg_2));
-
-	/* D: Set D6 to 0x9f9f9f9f */
-	out_be32(&ddr->debug[5], 0x9f9f9f9f);
-	debug("Setting D6 to 0x%08x\n", in_be32(&ddr->debug[5]));
-
-	/* E: Set D7 to 0x9f9f9f9f */
-	out_be32(&ddr->debug[6], 0x9f9f9f9f);
-	debug("Setting D7 to 0x%08x\n", in_be32(&ddr->debug[6]));
-
-	/* F: Set D2[20] */
-	setbits_be32(&ddr->debug[1], 0x800);
-	debug("Setting D2[20] to 0x%08x\n", in_be32(&ddr->debug[1]));
-
-	/* G: Poll on D2[20] until cleared */
-	while (in_be32(&ddr->debug[1]) & 0x800)
-		udelay(10000);          /* throttle polling rate */
-
-	/* H: Clear D1[15] */
-	clrbits_be32(&ddr->debug[0], 0x10000);
-	debug("Setting D1[15] to 0x%08x\n", in_be32(&ddr->debug[0]));
-
-	/* I: Set sdram_cfg_2[odt_cfg] */
-	setbits_be32(&ddr->sdram_cfg_2,
-		regs->ddr_sdram_cfg_2 & SDRAM_CFG2_ODT_CFG_MASK);
-	debug("Setting sdram_cfg_2 to 0x%08x\n", in_be32(&ddr->sdram_cfg_2));
-
-	/* Continuing with the DDR111 workaround */
-	/* 5. Set D2[21] */
-	setbits_be32(&ddr->debug[1], 0x400);
-	debug("Setting D2[21] to 0x%08x\n", in_be32(&ddr->debug[1]));
-
-	/* 6. Poll D2[21] until its cleared */
-	while (in_be32(&ddr->debug[1]) & 0x400)
-		udelay(10000);          /* throttle polling rate */
-
-	/* 7. Wait for state machine 2nd run, roughly 400ms/GB */
-	debug("Wait for %d * 10ms\n", timeout_save);
-	udelay(timeout_save * 10000);
-
-	/* 8. Set sdram_cfg_2[dinit] if options requires */
-	setbits_be32(&ddr->sdram_cfg_2,
-		regs->ddr_sdram_cfg_2 & SDRAM_CFG2_D_INIT);
-	debug("Setting sdram_cfg_2 to 0x%08x\n", in_be32(&ddr->sdram_cfg_2));
-
-	/* 9. Poll until dinit is cleared */
-	timeout = timeout_save;
-	debug("Need to wait up to %d * 10ms\n", timeout);
-	while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) &&
-		(timeout >= 0)) {
-		udelay(10000);		/* throttle polling rate */
-		timeout--;
-	}
-
-	if (timeout <= 0)
-		printf("Waiting for D_INIT timeout. Memory may not work.\n");
-
-	/* 10. Clear EEBACR[3] */
-	clrbits_be32(&ecm->eebacr, 10000000);
-	debug("Clearing EEBACR[3] to 0x%08x\n", in_be32(&ecm->eebacr));
-
-	if (csn != -1) {
-		csn_bnds_t = (unsigned int *) &regs->cs[csn].bnds;
-		*csn_bnds_t = csn_bnds_backup;
-		debug("Change cs%d_bnds back to 0x%08x\n",
-			csn, regs->cs[csn].bnds);
-		setbits_be32(&ddr->sdram_cfg, 0x2);	/* MEM_HALT */
-		switch (csn) {
-		case 0:
-			out_be32(&ddr->cs0_bnds, regs->cs[csn].bnds);
-			break;
-		case 1:
-			out_be32(&ddr->cs1_bnds, regs->cs[csn].bnds);
-			break;
-		case 2:
-			out_be32(&ddr->cs2_bnds, regs->cs[csn].bnds);
-			break;
-		case 3:
-			out_be32(&ddr->cs3_bnds, regs->cs[csn].bnds);
-			break;
-		}
-		clrbits_be32(&ddr->sdram_cfg, 0x2);
-	}
-#endif /* CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134 */
-}
diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c
index 2ccd9c7b9..33bc90016 100644
--- a/arch/powerpc/cpu/mpc85xx/fdt.c
+++ b/arch/powerpc/cpu/mpc85xx/fdt.c
@@ -586,6 +586,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 {
 	int off;
 	int val;
+	int len;
 	sys_info_t sysinfo;
 
 	/* delete crypto node if not on an E-processor */
@@ -615,8 +616,8 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 	get_sys_info(&sysinfo);
 	off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
 	while (off != -FDT_ERR_NOTFOUND) {
-		u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
-		val = cpu_to_fdt32(sysinfo.freq_processor[*reg]);
+		u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", &len);
+		val = cpu_to_fdt32(sysinfo.freq_processor[(*reg) / (len / 4)]);
 		fdt_setprop(blob, off, "clock-frequency", &val, 4);
 		off = fdt_node_offset_by_prop_value(blob, off, "device_type",
 							"cpu", 4);
diff --git a/arch/powerpc/cpu/mpc85xx/liodn.c b/arch/powerpc/cpu/mpc85xx/liodn.c
index 4b00da9f7..19e130e87 100644
--- a/arch/powerpc/cpu/mpc85xx/liodn.c
+++ b/arch/powerpc/cpu/mpc85xx/liodn.c
@@ -239,9 +239,9 @@ static void fdt_fixup_srio_liodn(void *blob, struct srio_liodn_id_table *tbl)
 #endif
 
 #define CONFIG_SYS_MAX_PCI_EPS		8
-#define CONFIG_SYS_PCI_EP_LIODN_START	256
 
-static void fdt_fixup_pci_liodn_offsets(void *fdt, const char *compat)
+static void fdt_fixup_pci_liodn_offsets(void *fdt, const char *compat,
+					int ep_liodn_start)
 {
 	int off, pci_idx = 0, pci_cnt = 0, i, rc;
 	const uint32_t *base_liodn;
@@ -271,7 +271,7 @@ static void fdt_fixup_pci_liodn_offsets(void *fdt, const char *compat)
 			continue;
 		}
 		for (i = 0; i < CONFIG_SYS_MAX_PCI_EPS; i++)
-			liodn_offs[i + 1] = CONFIG_SYS_PCI_EP_LIODN_START +
+			liodn_offs[i + 1] = ep_liodn_start +
 					i * pci_cnt + pci_idx - *base_liodn;
 		rc = fdt_setprop(fdt, off, "fsl,liodn-offset-list",
 				 liodn_offs, sizeof(liodn_offs));
@@ -338,5 +338,22 @@ void fdt_fixup_liodn(void *blob)
 	fdt_fixup_liodn_tbl(blob, rman_liodn_tbl, rman_liodn_tbl_sz);
 #endif
 
-	fdt_fixup_pci_liodn_offsets(blob, "fsl,qoriq-pcie-v2.4");
+	ccsr_pcix_t *pcix = (ccsr_pcix_t *)CONFIG_SYS_PCIE1_ADDR;
+	int pci_ver = pcix->ipver1 & 0xffff, liodn_base = 0;
+
+	if (pci_ver >= 0x0204) {
+		if (pci_ver >= 0x0300)
+			liodn_base = 1024;
+		else
+			liodn_base = 256;
+	}
+
+	if (liodn_base) {
+		char compat[32];
+
+		sprintf(compat, "fsl,qoriq-pcie-v%d.%d",
+			(pci_ver & 0xff00) >> 8, pci_ver & 0xff);
+		fdt_fixup_pci_liodn_offsets(blob, compat, liodn_base);
+		fdt_fixup_pci_liodn_offsets(blob, "fsl,qoriq-pcie", liodn_base);
+	}
 }
diff --git a/arch/powerpc/cpu/mpc85xx/mp.c b/arch/powerpc/cpu/mpc85xx/mp.c
index 5f198eb30..88c8e6593 100644
--- a/arch/powerpc/cpu/mpc85xx/mp.c
+++ b/arch/powerpc/cpu/mpc85xx/mp.c
@@ -11,7 +11,7 @@
 #include <asm/io.h>
 #include <asm/mmu.h>
 #include <asm/fsl_law.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 #include "mp.h"
 
 DECLARE_GLOBAL_DATA_PTR;
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index d08a8d212..1a58a194f 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -122,7 +122,7 @@ void get_sys_info(sys_info_t *sys_info)
 		sys_info->freq_processor[cpu] =
 			 freq_c_pll[cplx_pll] / core_cplx_pll_div[c_pll_sel];
 	}
-#ifdef CONFIG_PPC_B4860
+#if defined(CONFIG_PPC_B4860) || defined(CONFIG_PPC_T2080)
 #define FM1_CLK_SEL	0xe0000000
 #define FM1_CLK_SHIFT	29
 #else
diff --git a/arch/powerpc/cpu/mpc85xx/spl_minimal.c b/arch/powerpc/cpu/mpc85xx/spl_minimal.c
index 199b33e3b..9e4c6c907 100644
--- a/arch/powerpc/cpu/mpc85xx/spl_minimal.c
+++ b/arch/powerpc/cpu/mpc85xx/spl_minimal.c
@@ -7,7 +7,7 @@
 #include <common.h>
 #include <asm/processor.h>
 #include <asm/global_data.h>
-#include <asm/fsl_ifc.h>
+#include <fsl_ifc.h>
 #include <asm/io.h>
 
 DECLARE_GLOBAL_DATA_PTR;
diff --git a/arch/powerpc/cpu/mpc85xx/t2080_ids.c b/arch/powerpc/cpu/mpc85xx/t2080_ids.c
new file mode 100644
index 000000000..068e1f26b
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/t2080_ids.c
@@ -0,0 +1,142 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
+	/* dqrr liodn, frame data liodn, liodn off, sdest */
+	SET_QP_INFO(1, 27, 1, 0),
+	SET_QP_INFO(2, 28, 1, 0),
+	SET_QP_INFO(3, 29, 1, 1),
+	SET_QP_INFO(4, 30, 1, 1),
+	SET_QP_INFO(5, 31, 1, 2),
+	SET_QP_INFO(6, 32, 1, 2),
+	SET_QP_INFO(7, 33, 1, 3),
+	SET_QP_INFO(8, 34, 1, 3),
+	SET_QP_INFO(9, 35, 1, 0),
+	SET_QP_INFO(10, 36, 1, 0),
+	SET_QP_INFO(11, 37, 1, 1),
+	SET_QP_INFO(12, 38, 1, 1),
+	SET_QP_INFO(13, 39, 1, 2),
+	SET_QP_INFO(14, 40, 1, 2),
+	SET_QP_INFO(15, 41, 1, 3),
+	SET_QP_INFO(16, 42, 1, 3),
+	SET_QP_INFO(17, 43, 1, 0),
+	SET_QP_INFO(18, 44, 1, 0),
+};
+#endif
+
+#ifdef CONFIG_SYS_SRIO
+struct srio_liodn_id_table srio_liodn_tbl[] = {
+	SET_SRIO_LIODN_BASE(1, 307),
+	SET_SRIO_LIODN_BASE(2, 387),
+};
+int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl);
+#endif
+
+struct liodn_id_table liodn_tbl[] = {
+#ifdef CONFIG_SYS_DPAA_QBMAN
+	SET_QMAN_LIODN(62),
+	SET_BMAN_LIODN(63),
+#endif
+
+	SET_SDHC_LIODN(1, 552),
+
+	SET_PME_LIODN(117),
+
+	SET_USB_LIODN(1, "fsl-usb2-mph", 553),
+	SET_USB_LIODN(2, "fsl-usb2-dr", 554),
+
+	SET_SATA_LIODN(1, 555),
+	SET_SATA_LIODN(2, 556),
+
+	SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148),
+	SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 228),
+	SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 308),
+	SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 4, 388),
+
+	SET_DMA_LIODN(1, 147),
+	SET_DMA_LIODN(2, 227),
+	SET_DMA_LIODN(3, 226),
+
+	SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0),
+	SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0),
+	SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0),
+	SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0),
+
+#ifdef CONFIG_SYS_PMAN
+	SET_PMAN_LIODN(1, 513),
+	SET_PMAN_LIODN(2, 514),
+	SET_PMAN_LIODN(3, 515),
+#endif
+
+	/* SET_NEXUS_LIODN(557), -- not yet implemented */
+};
+int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+struct liodn_id_table fman1_liodn_tbl[] = {
+	SET_FMAN_RX_1G_LIODN(1, 0, 88),
+	SET_FMAN_RX_1G_LIODN(1, 1, 89),
+	SET_FMAN_RX_1G_LIODN(1, 2, 90),
+	SET_FMAN_RX_1G_LIODN(1, 3, 91),
+	SET_FMAN_RX_1G_LIODN(1, 4, 92),
+	SET_FMAN_RX_1G_LIODN(1, 5, 93),
+	SET_FMAN_RX_10G_LIODN(1, 0, 94),
+	SET_FMAN_RX_10G_LIODN(1, 1, 95),
+};
+int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
+#endif
+
+struct liodn_id_table sec_liodn_tbl[] = {
+	SET_SEC_JR_LIODN_ENTRY(0, 454, 458),
+	SET_SEC_JR_LIODN_ENTRY(1, 455, 459),
+	SET_SEC_JR_LIODN_ENTRY(2, 456, 460),
+	SET_SEC_JR_LIODN_ENTRY(3, 457, 461),
+	SET_SEC_RTIC_LIODN_ENTRY(a, 453),
+	SET_SEC_RTIC_LIODN_ENTRY(b, 549),
+	SET_SEC_RTIC_LIODN_ENTRY(c, 550),
+	SET_SEC_RTIC_LIODN_ENTRY(d, 551),
+	SET_SEC_DECO_LIODN_ENTRY(0, 541, 610),
+	SET_SEC_DECO_LIODN_ENTRY(1, 542, 611),
+	SET_SEC_DECO_LIODN_ENTRY(2, 543, 612),
+	SET_SEC_DECO_LIODN_ENTRY(3, 544, 613),
+	SET_SEC_DECO_LIODN_ENTRY(4, 545, 614),
+	SET_SEC_DECO_LIODN_ENTRY(5, 546, 615),
+	SET_SEC_DECO_LIODN_ENTRY(6, 547, 616),
+	SET_SEC_DECO_LIODN_ENTRY(7, 548, 617),
+};
+int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_RMAN
+struct liodn_id_table rman_liodn_tbl[] = {
+	/* Set RMan block 0-3 liodn offset */
+	SET_RMAN_LIODN(0, 6),
+	SET_RMAN_LIODN(1, 7),
+	SET_RMAN_LIODN(2, 8),
+	SET_RMAN_LIODN(3, 9),
+};
+int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl);
+#endif
+
+struct liodn_id_table liodn_bases[] = {
+#ifdef CONFIG_SYS_DPAA_DCE
+	[FSL_HW_PORTAL_DCE]  = SET_LIODN_BASE_2(618, 694),
+#endif
+	[FSL_HW_PORTAL_SEC]  = SET_LIODN_BASE_2(462, 558),
+#ifdef CONFIG_SYS_DPAA_FMAN
+	[FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973),
+#endif
+#ifdef CONFIG_SYS_DPAA_PME
+	[FSL_HW_PORTAL_PME]   = SET_LIODN_BASE_2(770, 846),
+#endif
+#ifdef CONFIG_SYS_DPAA_RMAN
+	[FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922),
+#endif
+};
diff --git a/arch/powerpc/cpu/mpc85xx/t2080_serdes.c b/arch/powerpc/cpu/mpc85xx/t2080_serdes.c
new file mode 100644
index 000000000..f2fbdebec
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/t2080_serdes.c
@@ -0,0 +1,208 @@
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Shengzhou Liu <Shengzhou.Liu@freescale.com>
+ *
+ * SPDX-License-Identifier:     GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/fsl_serdes.h>
+#include <asm/processor.h>
+#include "fsl_corenet2_serdes.h"
+
+struct serdes_config {
+	u32 protocol;
+	u8 lanes[SRDS_MAX_LANES];
+};
+
+static const struct serdes_config serdes1_cfg_tbl[] = {
+	/* SerDes 1 */
+	{0x6E, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		PCIE4, PCIE4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0xBC, {PCIE3, PCIE3, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, PCIE4, PCIE4, PCIE4, PCIE4} },
+	{0xC8, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, PCIE4, PCIE4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0xD6, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, PCIE4, PCIE4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0xDE, {PCIE3, PCIE3, PCIE3, PCIE3,
+		PCIE4, PCIE1, PCIE2, SGMII_FM1_DTSEC6} },
+	{0xE0, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4,
+		PCIE1, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0xF2, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, PCIE4, PCIE1, PCIE2, SGMII_FM1_DTSEC6} },
+	{0xF8, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, PCIE4, PCIE1, PCIE2, SGMII_FM1_DTSEC6} },
+	{0xFA, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, PCIE4, PCIE1,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x6C, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		PCIE4, PCIE4, PCIE4, PCIE4} },
+#if defined(CONFIG_PPC_T2080)
+	{0x1C, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x95, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0xA2, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x94, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x51, {XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+		XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+		PCIE4, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x5F, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+		HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+		PCIE4, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x65, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+		HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+		PCIE4, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x6B, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+		XFI_FM1_MAC1, XFI_FM1_MAC2,
+		PCIE4, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x6D, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		PCIE4, PCIE4, PCIE4, PCIE4} },
+	{0x71, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE4,
+		SGMII_FM1_DTSEC4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0xA6, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE4,
+		PCIE4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x8E, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE4,
+		PCIE4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x8F, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, PCIE4,
+		PCIE4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x82, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		PCIE4, PCIE4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x83, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		PCIE4, PCIE4, SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0xA4, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		PCIE4, PCIE4, PCIE4, PCIE4} },
+	{0x96, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		PCIE4, PCIE4, PCIE4, PCIE4} },
+	{0x8A, {SGMII_FM1_DTSEC9, SGMII_FM1_DTSEC10,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		PCIE4, PCIE4, PCIE4, PCIE4} },
+	{0x67, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+		XFI_FM1_MAC1, XFI_FM1_MAC2,
+		PCIE4, PCIE4, PCIE4, PCIE4} },
+	{0xAB, {PCIE3, PCIE3, PCIE3, PCIE3,
+		PCIE4, PCIE4, PCIE4, PCIE4} },
+	{0xDA, {PCIE3, PCIE3, PCIE3, PCIE3,
+		PCIE3, PCIE3, PCIE3, PCIE3} },
+	{0xD9, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0xD3, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0xCB, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0xD8, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x66, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+		XFI_FM1_MAC1, XFI_FM1_MAC2,
+		PCIE4, PCIE4, PCIE4, PCIE4} },
+
+#elif defined(CONFIG_PPC_T2081)
+	{0xAA, {PCIE3, PCIE3, PCIE3, PCIE3,
+		PCIE4, PCIE4, PCIE4, PCIE4} },
+	{0xCA, {PCIE3, SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+	{0x70, {XFI_FM1_MAC9, XFI_FM1_MAC10, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, PCIE4, SGMII_FM1_DTSEC4,
+		SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6} },
+#endif
+	{}
+};
+
+#ifndef CONFIG_PPC_T2081
+static const struct serdes_config serdes2_cfg_tbl[] = {
+	/* SerDes 2 */
+	{0x1F, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2} },
+	{0x16, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SATA1, SATA2} },
+	{0x01, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1} },
+	{0x29, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1} },
+	{0x2D, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO1, SRIO1, SRIO1, SRIO1} },
+	{0x15, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SATA1, SATA2} },
+	{0x18, {PCIE1, PCIE1, PCIE1, PCIE1, AURORA, AURORA, SATA1, SATA2} },
+	{0x02, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1} },
+	{0x36, {SRIO2, SRIO2, SRIO2, SRIO2, AURORA, AURORA, SATA1, SATA2} },
+	{}
+};
+#endif
+
+static const struct serdes_config *serdes_cfg_tbl[] = {
+	serdes1_cfg_tbl,
+#ifndef CONFIG_PPC_T2081
+	serdes2_cfg_tbl,
+#endif
+};
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+	const struct serdes_config *ptr;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+	while (ptr->protocol) {
+		if (ptr->protocol == cfg)
+			return ptr->lanes[lane];
+		ptr++;
+	}
+	return 0;
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+	int i;
+	const struct serdes_config *ptr;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+	while (ptr->protocol) {
+		if (ptr->protocol == prtcl)
+			break;
+		ptr++;
+	}
+
+	if (!ptr->protocol)
+		return 0;
+
+	for (i = 0; i < SRDS_MAX_LANES; i++) {
+		if (ptr->lanes[i] != NONE)
+			return 1;
+	}
+
+	return 0;
+}
diff --git a/arch/powerpc/cpu/mpc85xx/t4240_ids.c b/arch/powerpc/cpu/mpc85xx/t4240_ids.c
index 54c1cfd2c..f18131513 100644
--- a/arch/powerpc/cpu/mpc85xx/t4240_ids.c
+++ b/arch/powerpc/cpu/mpc85xx/t4240_ids.c
@@ -86,10 +86,10 @@ struct liodn_id_table liodn_tbl[] = {
 	SET_SATA_LIODN(1, 555),
 	SET_SATA_LIODN(2, 556),
 
-	SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148),
-	SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 228),
-	SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 308),
-	SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 4, 388),
+	SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148),
+	SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 228),
+	SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 308),
+	SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 4, 388),
 
 	SET_DMA_LIODN(1, 147),
 	SET_DMA_LIODN(2, 227),