diff options
Diffstat (limited to 'arch/nds32/cpu/n1213/ag101/lowlevel_init.S')
| -rw-r--r-- | arch/nds32/cpu/n1213/ag101/lowlevel_init.S | 32 |
1 files changed, 31 insertions, 1 deletions
diff --git a/arch/nds32/cpu/n1213/ag101/lowlevel_init.S b/arch/nds32/cpu/n1213/ag101/lowlevel_init.S index 66ed8f0cf..810326d20 100644 --- a/arch/nds32/cpu/n1213/ag101/lowlevel_init.S +++ b/arch/nds32/cpu/n1213/ag101/lowlevel_init.S @@ -22,6 +22,7 @@ #define SDMC_CR1_A (CONFIG_FTSDMC021_BASE + FTSDMC021_CR1) #define SDMC_CR2_A (CONFIG_FTSDMC021_BASE + FTSDMC021_CR2) #define SDMC_B0_BSR_A (CONFIG_FTSDMC021_BASE + FTSDMC021_BANK0_BSR) +#define SDMC_B1_BSR_A (CONFIG_FTSDMC021_BASE + FTSDMC021_BANK1_BSR) #define SDMC_TP1_D CONFIG_SYS_FTSDMC021_TP1 #define SDMC_TP2_D CONFIG_SYS_FTSDMC021_TP2 @@ -29,6 +30,7 @@ #define SDMC_CR2_D CONFIG_SYS_FTSDMC021_CR2 #define SDMC_B0_BSR_D CONFIG_SYS_FTSDMC021_BANK0_BSR +#define SDMC_B1_BSR_D CONFIG_SYS_FTSDMC021_BANK1_BSR /* * parameters for the static memory controller @@ -80,6 +82,11 @@ lowlevel_init: led 0x10 jal remap +#if (defined(NDS32_EXT_FPU_DP) || defined(NDS32_EXT_FPU_SP)) + led 0x1f + jal enable_fpu +#endif + led 0x20 ret $r10 @@ -151,12 +158,12 @@ relo_base: */ led 0x1a write32 SDMC_B0_BSR_A, SDMC_B0_BSR_D ! 0x00001100 + write32 SDMC_B1_BSR_A, SDMC_B1_BSR_D ! 0x00001140 /* clear empty BSR registers */ led 0x1b li $r4, CONFIG_FTSDMC021_BASE li $r5, 0x0 - swi $r5, [$r4 + FTSDMC021_BANK1_BSR] swi $r5, [$r4 + FTSDMC021_BANK2_BSR] swi $r5, [$r4 + FTSDMC021_BANK3_BSR] @@ -207,6 +214,8 @@ relo_base: * - after remap: flash/rom 0x80000000, sdram: 0x00000000 */ led 0x1c + write32 SDMC_B0_BSR_A, 0x00001000 + write32 SDMC_B1_BSR_A, 0x00001040 setbf15 AHBC_CR_A, FTAHBC020S_CR_REMAP ! 0x1 #endif /* #ifdef CONFIG_MEM_REMAP */ @@ -214,6 +223,27 @@ relo_base: 2: ret + /* + * enable_fpu: + * Some of Andes CPU version support FPU coprocessor, if so, + * and toolchain support FPU instruction set, we should enable it. + */ +#if (defined(NDS32_EXT_FPU_DP) || defined(NDS32_EXT_FPU_SP)) +enable_fpu: + mfsr $r0, $CPU_VER /* enable FPU if it exists */ + srli $r0, $r0, 3 + andi $r0, $r0, 1 + beqz $r0, 1f /* skip if no COP */ + mfsr $r0, $FUCOP_EXIST + srli $r0, $r0, 31 + beqz $r0, 1f /* skip if no FPU */ + mfsr $r0, $FUCOP_CTL + ori $r0, $r0, 1 + mtsr $r0, $FUCOP_CTL +1: + ret +#endif + .globl show_led show_led: li $r8, (CONFIG_DEBUG_LED) |