diff options
Diffstat (limited to 'arch/arm/cpu/arm926ejs/mxs/spl_power_init.c')
| -rw-r--r-- | arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 50 |
1 files changed, 40 insertions, 10 deletions
diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c index 287c698ff..21cac7b33 100644 --- a/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c +++ b/arch/arm/cpu/arm926ejs/mxs/spl_power_init.c @@ -687,6 +687,12 @@ static void mxs_power_configure_power_source(void) mxs_init_batt_bo(); mxs_switch_vddd_to_dcdc_source(); + +#ifdef CONFIG_MX23 + /* Fire up the VDDMEM LinReg now that we're all set. */ + writel(POWER_VDDMEMCTRL_ENABLE_LINREG | POWER_VDDMEMCTRL_ENABLE_ILIMIT, + &power_regs->hw_power_vddmemctrl); +#endif } static void mxs_enable_output_rail_protection(void) @@ -781,7 +787,11 @@ struct mxs_vddx_cfg { static const struct mxs_vddx_cfg mxs_vddio_cfg = { .reg = &(((struct mxs_power_regs *)MXS_POWER_BASE)-> hw_power_vddioctrl), +#if defined(CONFIG_MX23) + .step_mV = 25, +#else .step_mV = 50, +#endif .lowest_mV = 2800, .powered_by_linreg = mxs_get_vddio_power_source_off, .trg_mask = POWER_VDDIOCTRL_TRG_MASK, @@ -804,6 +814,21 @@ static const struct mxs_vddx_cfg mxs_vddd_cfg = { .bo_offset_offset = POWER_VDDDCTRL_BO_OFFSET_OFFSET, }; +#ifdef CONFIG_MX23 +static const struct mxs_vddx_cfg mxs_vddmem_cfg = { + .reg = &(((struct mxs_power_regs *)MXS_POWER_BASE)-> + hw_power_vddmemctrl), + .step_mV = 50, + .lowest_mV = 1700, + .powered_by_linreg = NULL, + .trg_mask = POWER_VDDMEMCTRL_TRG_MASK, + .bo_irq = 0, + .bo_enirq = 0, + .bo_offset_mask = 0, + .bo_offset_offset = 0, +}; +#endif + static void mxs_power_set_vddx(const struct mxs_vddx_cfg *cfg, uint32_t new_target, uint32_t new_brownout) { @@ -821,9 +846,10 @@ static void mxs_power_set_vddx(const struct mxs_vddx_cfg *cfg, cur_target += cfg->lowest_mV; adjust_up = new_target > cur_target; - powered_by_linreg = cfg->powered_by_linreg(); + if (cfg->powered_by_linreg) + powered_by_linreg = cfg->powered_by_linreg(); - if (adjust_up) { + if (adjust_up && cfg->bo_irq) { if (powered_by_linreg) { bo_int = readl(cfg->reg); clrbits_le32(cfg->reg, cfg->bo_enirq); @@ -864,14 +890,16 @@ static void mxs_power_set_vddx(const struct mxs_vddx_cfg *cfg, cur_target += cfg->lowest_mV; } while (new_target > cur_target); - if (adjust_up && powered_by_linreg) { - writel(cfg->bo_irq, &power_regs->hw_power_ctrl_clr); - if (bo_int & cfg->bo_enirq) - setbits_le32(cfg->reg, cfg->bo_enirq); - } + if (cfg->bo_irq) { + if (adjust_up && powered_by_linreg) { + writel(cfg->bo_irq, &power_regs->hw_power_ctrl_clr); + if (bo_int & cfg->bo_enirq) + setbits_le32(cfg->reg, cfg->bo_enirq); + } - clrsetbits_le32(cfg->reg, cfg->bo_offset_mask, - new_brownout << cfg->bo_offset_offset); + clrsetbits_le32(cfg->reg, cfg->bo_offset_mask, + new_brownout << cfg->bo_offset_offset); + } } static void mxs_setup_batt_detect(void) @@ -910,7 +938,9 @@ void mxs_power_init(void) mxs_power_set_vddx(&mxs_vddio_cfg, 3300, 3150); mxs_power_set_vddx(&mxs_vddd_cfg, 1500, 1000); - +#ifdef CONFIG_MX23 + mxs_power_set_vddx(&mxs_vddmem_cfg, 2500, 1700); +#endif writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ | POWER_CTRL_VDDIO_BO_IRQ | POWER_CTRL_VDD5V_DROOP_IRQ | POWER_CTRL_VBUS_VALID_IRQ | POWER_CTRL_BATT_BO_IRQ | |