diff options
| -rw-r--r-- | board/CarMediaLab/flea3/flea3.c | 4 | ||||
| -rw-r--r-- | include/configs/flea3.h | 20 |
2 files changed, 14 insertions, 10 deletions
diff --git a/board/CarMediaLab/flea3/flea3.c b/board/CarMediaLab/flea3/flea3.c index 64f4b57f1..34ede87ff 100644 --- a/board/CarMediaLab/flea3/flea3.c +++ b/board/CarMediaLab/flea3/flea3.c @@ -160,7 +160,7 @@ static void board_setup_sdram(void) writel(0x2000, &esdc->esdctl0); writel(0x2000, &esdc->esdctl1); - board_setup_sdram_bank(CSD1_BASE_ADDR); + board_setup_sdram_bank(CSD0_BASE_ADDR); } static void setup_iomux_uart3(void) @@ -229,7 +229,7 @@ int board_early_init_f(void) (struct ccm_regs *)IMX_CCM_BASE; /* setup GPIO3_1 to set HighVCore signal */ - mxc_request_iomux(MX35_PIN_ATA_DATA1, MUX_CONFIG_ALT5); + mxc_request_iomux(MX35_PIN_ATA_DA1, MUX_CONFIG_ALT5); gpio_direction_output(65, 1); /* initialize PLL and clock configuration */ diff --git a/include/configs/flea3.h b/include/configs/flea3.h index 20100c214..aac3930f0 100644 --- a/include/configs/flea3.h +++ b/include/configs/flea3.h @@ -107,7 +107,7 @@ #define CONFIG_BOOTDELAY 3 -#define CONFIG_LOADADDR 0x90800000 /* loadaddr env var */ +#define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */ /* @@ -162,10 +162,10 @@ * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 CSD1_BASE_ADDR +#define PHYS_SDRAM_1 CSD0_BASE_ADDR #define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) -#define CONFIG_SYS_SDRAM_BASE CSD1_BASE_ADDR +#define CONFIG_SYS_SDRAM_BASE CSD0_BASE_ADDR #define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR + 0x10000) #define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE / 2) #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ @@ -181,10 +181,14 @@ #define CONFIG_FLASH_CFI_MTD #define CONFIG_MTD_PARTITIONS #define MTDIDS_DEFAULT "nand0=mxc_nand,nor0=physmap-flash.0" -#define MTDPARTS_DEFAULT "mtdparts=mxc_nand:196m(root1)," \ - "196m(root2),-(user);" \ +#define MTDPARTS_DEFAULT "mtdparts=mxc_nand:50m(root1)," \ + "32m(rootfb)," \ + "64m(pcache)," \ + "64m(app1)," \ + "10m(app2),-(spool);" \ "physmap-flash.0:512k(u-boot),64k(env1)," \ "64k(env2),3776k(kernel1),3776k(kernel2)" + /* * FLASH and environment organization */ @@ -249,10 +253,10 @@ "else run addip_sta;fi\0" \ "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ "addtty=setenv bootargs ${bootargs}" \ - " console=ttymxc0,${baudrate}\0" \ + " console=ttymxc2,${baudrate}\0" \ "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ - "loadaddr=90800000\0" \ - "kernel_addr_r=90800000\0" \ + "loadaddr=80800000\0" \ + "kernel_addr_r=80800000\0" \ "hostname=" xstr(CONFIG_HOSTNAME) "\0" \ "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \ "ramdisk_file=" xstr(CONFIG_HOSTNAME) "/uRamdisk\0" \ |