diff options
30 files changed, 1154 insertions, 227 deletions
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index 6776c85e4..6e5aec26e 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -83,6 +83,7 @@ COBJS-$(CONFIG_PPC_P4080) += ddr-gen3.o COBJS-$(CONFIG_PPC_P5020) += ddr-gen3.o COBJS-$(CONFIG_PPC_P5040) += ddr-gen3.o COBJS-$(CONFIG_PPC_T4240) += ddr-gen3.o +COBJS-$(CONFIG_PPC_T4160) += ddr-gen3.o COBJS-$(CONFIG_PPC_B4420) += ddr-gen3.o COBJS-$(CONFIG_PPC_B4860) += ddr-gen3.o COBJS-$(CONFIG_BSC9131) += ddr-gen3.o @@ -102,6 +103,7 @@ COBJS-$(CONFIG_PPC_P4080) += p4080_ids.o COBJS-$(CONFIG_PPC_P5020) += p5020_ids.o COBJS-$(CONFIG_PPC_P5040) += p5040_ids.o COBJS-$(CONFIG_PPC_T4240) += t4240_ids.o +COBJS-$(CONFIG_PPC_T4160) += t4240_ids.o COBJS-$(CONFIG_PPC_B4420) += b4860_ids.o COBJS-$(CONFIG_PPC_B4860) += b4860_ids.o @@ -137,6 +139,7 @@ COBJS-$(CONFIG_PPC_P4080) += p4080_serdes.o COBJS-$(CONFIG_PPC_P5020) += p5020_serdes.o COBJS-$(CONFIG_PPC_P5040) += p5040_serdes.o COBJS-$(CONFIG_PPC_T4240) += t4240_serdes.o +COBJS-$(CONFIG_PPC_T4160) += t4240_serdes.o COBJS-$(CONFIG_PPC_B4420) += b4860_serdes.o COBJS-$(CONFIG_PPC_B4860) += b4860_serdes.o COBJS-$(CONFIG_BSC9132) += bsc9132_serdes.o diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 53713e31d..48e6a05d3 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -637,6 +637,28 @@ skip_l2: } #endif +#if defined(CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE) + ccsr_usb_phy_t *usb_phy = + (void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR; + setbits_be32(&usb_phy->pllprg[1], + CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN | + CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN | + CONFIG_SYS_FSL_USB_PLLPRG2_MFI | + CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN); + setbits_be32(&usb_phy->port1.ctrl, + CONFIG_SYS_FSL_USB_CTRL_PHY_EN); + setbits_be32(&usb_phy->port1.drvvbuscfg, + CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN); + setbits_be32(&usb_phy->port1.pwrfltcfg, + CONFIG_SYS_FSL_USB_PWRFLT_CR_EN); + setbits_be32(&usb_phy->port2.ctrl, + CONFIG_SYS_FSL_USB_CTRL_PHY_EN); + setbits_be32(&usb_phy->port2.drvvbuscfg, + CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN); + setbits_be32(&usb_phy->port2.pwrfltcfg, + CONFIG_SYS_FSL_USB_PWRFLT_CR_EN); +#endif + #ifdef CONFIG_FMAN_ENET fman_enet_init(); #endif diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c index ef0dd1da6..c5b47200e 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c +++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c @@ -142,7 +142,7 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, } } #ifdef CONFIG_SYS_FSL_ERRATUM_A_004934 - out_be32(&ddr->debug[28], 0x00003000); + out_be32(&ddr->debug[28], 0x30003000); #endif #ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003474 diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c index 01dcdf6bc..93eca7669 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c @@ -164,7 +164,7 @@ u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift) } cfg >>= sd_prctl_shift; - printf("Using SERDES%d Protocol: 0x%x\n", sd + 1, cfg); + printf("Using SERDES%d Protocol: %d (0x%x)\n", sd + 1, cfg, cfg); if (!is_serdes_prtcl_valid(sd, cfg)) printf("SERDES%d[PRTCL] = 0x%x is not valid\n", sd + 1, cfg); diff --git a/arch/powerpc/cpu/mpc85xx/portals.c b/arch/powerpc/cpu/mpc85xx/portals.c index d529095ee..672edde45 100644 --- a/arch/powerpc/cpu/mpc85xx/portals.c +++ b/arch/powerpc/cpu/mpc85xx/portals.c @@ -128,24 +128,32 @@ static int fdt_qportal(void *blob, int off, int id, char *name, childoff = fdt_subnode_offset(blob, off, name); if (create) { - if (childoff <= 0) - childoff = fdt_add_subnode(blob, off, name); + char handle[64], *p; - if (childoff > 0) { - char handle[64], *p; + strncpy(handle, name, sizeof(handle)); + p = strchr(handle, '@'); + if (!strncmp(name, "fman", 4)) { + *p = *(p + 1); + p++; + } + *p = '\0'; - strncpy(handle, name, sizeof(handle)); - p = strchr(handle, '@'); - if (!strncmp(name, "fman", 4)) { - *p = *(p + 1); - p++; - } - *p = '\0'; + dev_off = fdt_path_offset(blob, handle); + /* skip this node if alias is not found */ + if (dev_off == -FDT_ERR_BADPATH) + return 0; + if (dev_off < 0) + return dev_off; - dev_off = fdt_path_offset(blob, handle); - if (dev_off < 0) - return dev_off; + if (childoff <= 0) + childoff = fdt_add_subnode(blob, off, name); + /* need to update the dev_off after adding a subnode */ + dev_off = fdt_path_offset(blob, handle); + if (dev_off < 0) + return dev_off; + + if (childoff > 0) { dev_handle = fdt_get_phandle(blob, dev_off); if (dev_handle <= 0) { dev_handle = fdt_alloc_phandle(blob); diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S index 5c4b1e3b7..467ea1045 100644 --- a/arch/powerpc/cpu/mpc85xx/release.S +++ b/arch/powerpc/cpu/mpc85xx/release.S @@ -69,9 +69,9 @@ __secondary_start_page: #endif #ifdef CONFIG_SYS_FSL_ERRATUM_CPU_A003999 - mfspr r3,977 + mfspr r3,SPRN_HDBCR1 oris r3,r3,0x0100 - mtspr 977,r3 + mtspr SPRN_HDBCR1,r3 #endif #ifdef CONFIG_SYS_FSL_ERRATUM_A004510 @@ -93,10 +93,10 @@ __secondary_start_page: 1: /* Erratum says set bits 55:60 to 001001 */ msync isync - mfspr r3,976 + mfspr r3,SPRN_HDBCR0 li r4,0x48 rlwimi r3,r4,0,0x1f8 - mtspr 976,r3 + mtspr SPRN_HDBCR0,r3 isync 2: #endif @@ -159,9 +159,9 @@ __secondary_start_page: * we cannot access it yet before setting up a new TLB */ mfspr r0,SPRN_PIR -#if defined(CONFIG_E6500) +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* - * PIR definition for E6500 + * PIR definition for Chassis 2 * 0-17 Reserved (logic 0s) * 8-19 CHIP_ID, 2'b00 - SoC 1 * all others - reserved @@ -187,7 +187,7 @@ __secondary_start_page: slwi r8,r4,6 /* spin table is padded to 64 byte */ add r10,r3,r8 -#ifdef CONFIG_E6500 +#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 mfspr r0,SPRN_PIR /* * core 0 thread 0: pir reset value 0x00, new pir 0 diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c index 297f2ed47..f00b1abe6 100644 --- a/arch/powerpc/cpu/mpc85xx/speed.c +++ b/arch/powerpc/cpu/mpc85xx/speed.c @@ -132,10 +132,15 @@ void get_sys_info (sys_info_t * sysInfo) sysInfo->freqProcessor[cpu] = freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel]; } +#ifdef CONFIG_PPC_B4860 +#define FM1_CLK_SEL 0xe0000000 +#define FM1_CLK_SHIFT 29 +#else #define PME_CLK_SEL 0xe0000000 #define PME_CLK_SHIFT 29 #define FM1_CLK_SEL 0x1c000000 #define FM1_CLK_SHIFT 26 +#endif rcw_tmp = in_be32(&gur->rcwsr[7]); #ifdef CONFIG_SYS_DPAA_PME @@ -185,6 +190,9 @@ void get_sys_info (sys_info_t * sysInfo) case 4: sysInfo->freqFMan[0] = freqCC_PLL[3] / 4; break; + case 5: + sysInfo->freqFMan[0] = sysInfo->freqSystemBus; + break; case 6: sysInfo->freqFMan[0] = freqCC_PLL[4] / 2; break; @@ -285,6 +293,10 @@ void get_sys_info (sys_info_t * sysInfo) #endif #endif +#ifdef CONFIG_SYS_DPAA_QBMAN + sysInfo->freqQMAN = sysInfo->freqSystemBus / 2; +#endif + #endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */ #else /* CONFIG_FSL_CORENET */ diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index 3f76ee66c..5542d0afb 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -116,10 +116,10 @@ _start_e500: /* Erratum says set bits 55:60 to 001001 */ msync isync - mfspr r3,976 + mfspr r3,SPRN_HDBCR0 li r4,0x48 rlwimi r3,r4,0,0x1f8 - mtspr 976,r3 + mtspr SPRN_HDBCR0,r3 isync 2: #endif @@ -173,52 +173,6 @@ l2_disabled: mfspr r1,DBSR mtspr DBSR,r1 /* Clear all valid bits */ - /* - * Enable L1 Caches early - * - */ - -#ifdef CONFIG_SYS_CACHE_STASHING - /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */ - li r2,(32 + 0) - mtspr L1CSR2,r2 -#endif - - /* Enable/invalidate the I-Cache */ - lis r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@h - ori r2,r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@l - mtspr SPRN_L1CSR1,r2 -1: - mfspr r3,SPRN_L1CSR1 - and. r1,r3,r2 - bne 1b - - lis r3,(L1CSR1_CPE|L1CSR1_ICE)@h - ori r3,r3,(L1CSR1_CPE|L1CSR1_ICE)@l - mtspr SPRN_L1CSR1,r3 - isync -2: - mfspr r3,SPRN_L1CSR1 - andi. r1,r3,L1CSR1_ICE@l - beq 2b - - /* Enable/invalidate the D-Cache */ - lis r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@h - ori r2,r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@l - mtspr SPRN_L1CSR0,r2 -1: - mfspr r3,SPRN_L1CSR0 - and. r1,r3,r2 - bne 1b - - lis r3,(L1CSR0_CPE|L1CSR0_DCE)@h - ori r3,r3,(L1CSR0_CPE|L1CSR0_DCE)@l - mtspr SPRN_L1CSR0,r3 - isync -2: - mfspr r3,SPRN_L1CSR0 - andi. r1,r3,L1CSR0_DCE@l - beq 2b .macro create_tlb1_entry esel ts tsize epn wimg rpn perm phy_high scratch lis \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@h @@ -372,9 +326,9 @@ l2_disabled: #endif #ifdef CONFIG_SYS_FSL_ERRATUM_CPU_A003999 - mfspr r3,977 + mfspr r3,SPRN_HDBCR1 oris r3,r3,0x0100 - mtspr 977,r3 + mtspr SPRN_HDBCR1,r3 #endif /* Enable Branch Prediction */ @@ -782,11 +736,57 @@ enable_l2_cluster_l2: bne 1b lis r4, L2CSR0_L2E@h sync - stw r4, 0(r3) /* eanble L2 */ + stw r4, 0(r3) /* enable L2 */ delete_ccsr_l2_tlb: delete_tlb0_entry 0, CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, r3 #endif + /* + * Enable the L1. On e6500, this has to be done + * after the L2 is up. + */ + +#ifdef CONFIG_SYS_CACHE_STASHING + /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */ + li r2,(32 + 0) + mtspr L1CSR2,r2 +#endif + + /* Enable/invalidate the I-Cache */ + lis r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@h + ori r2,r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@l + mtspr SPRN_L1CSR1,r2 +1: + mfspr r3,SPRN_L1CSR1 + and. r1,r3,r2 + bne 1b + + lis r3,(L1CSR1_CPE|L1CSR1_ICE)@h + ori r3,r3,(L1CSR1_CPE|L1CSR1_ICE)@l + mtspr SPRN_L1CSR1,r3 + isync +2: + mfspr r3,SPRN_L1CSR1 + andi. r1,r3,L1CSR1_ICE@l + beq 2b + + /* Enable/invalidate the D-Cache */ + lis r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@h + ori r2,r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@l + mtspr SPRN_L1CSR0,r2 +1: + mfspr r3,SPRN_L1CSR0 + and. r1,r3,r2 + bne 1b + + lis r3,(L1CSR0_CPE|L1CSR0_DCE)@h + ori r3,r3,(L1CSR0_CPE|L1CSR0_DCE)@l + mtspr SPRN_L1CSR0,r3 + isync +2: + mfspr r3,SPRN_L1CSR0 + andi. r1,r3,L1CSR0_DCE@l + beq 2b #ifdef CONFIG_SYS_FSL_ERRATUM_A004510 #define DCSR_LAWBARH0 (CONFIG_SYS_CCSRBAR + 0x1000) #define LAW_SIZE_1M 0x13 diff --git a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c index 102defa56..c001780ca 100644 --- a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c @@ -31,7 +31,8 @@ struct serdes_config { u8 lanes[SRDS_MAX_LANES]; }; -static struct serdes_config serdes1_cfg_tbl[] = { +#ifdef CONFIG_PPC_T4240 +static const struct serdes_config serdes1_cfg_tbl[] = { /* SerDes 1 */ {1, {XAUI_FM1_MAC9, XAUI_FM1_MAC9, XAUI_FM1_MAC9, XAUI_FM1_MAC9, @@ -66,7 +67,7 @@ static struct serdes_config serdes1_cfg_tbl[] = { NONE, NONE, QSGMII_FM1_A, NONE}}, {} }; -static struct serdes_config serdes2_cfg_tbl[] = { +static const struct serdes_config serdes2_cfg_tbl[] = { /* SerDes 2 */ {1, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, XAUI_FM2_MAC9, XAUI_FM2_MAC9, @@ -150,7 +151,7 @@ static struct serdes_config serdes2_cfg_tbl[] = { SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}}, {} }; -static struct serdes_config serdes3_cfg_tbl[] = { +static const struct serdes_config serdes3_cfg_tbl[] = { /* SerDes 3 */ {2, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1}}, {4, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2}}, @@ -174,20 +175,151 @@ static struct serdes_config serdes3_cfg_tbl[] = { SRIO1, SRIO1, SRIO1, SRIO1}}, {} }; -static struct serdes_config serdes4_cfg_tbl[] = { +static const struct serdes_config serdes4_cfg_tbl[] = { /* SerDes 4 */ {2, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3}}, {4, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4}}, {6, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2}}, {8, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2}}, - {10, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SATA1, SATA1}}, - {12, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SATA1, SATA1}}, + {10, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SATA1, SATA2} }, + {12, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SATA1, SATA2} }, {14, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2}}, {16, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2}}, {18, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, AURORA, AURORA}}, {} }; -static struct serdes_config *serdes_cfg_tbl[] = { +#elif defined(CONFIG_PPC_T4160) +static const struct serdes_config serdes1_cfg_tbl[] = { + /* SerDes 1 */ + {1, {XAUI_FM1_MAC9, XAUI_FM1_MAC9, + XAUI_FM1_MAC9, XAUI_FM1_MAC9, + XAUI_FM1_MAC10, XAUI_FM1_MAC10, + XAUI_FM1_MAC10, XAUI_FM1_MAC10} }, + {2, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + HIGIG_FM1_MAC10, HIGIG_FM1_MAC10, + HIGIG_FM1_MAC10, HIGIG_FM1_MAC10} }, + {4, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + HIGIG_FM1_MAC9, HIGIG_FM1_MAC9, + HIGIG_FM1_MAC10, HIGIG_FM1_MAC10, + HIGIG_FM1_MAC10, HIGIG_FM1_MAC10} }, + {28, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4} }, + {36, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6, + SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9, + SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, + SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4} }, + {38, {NONE, NONE, QSGMII_FM1_B, NONE, + NONE, NONE, QSGMII_FM1_A, NONE} }, + {} +}; +static const struct serdes_config serdes2_cfg_tbl[] = { + /* SerDes 2 */ + {7, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, + {13, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, + {16, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, + {22, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, + {25, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, + {26, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + NONE, NONE} }, + {28, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, + {36, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, + {38, {NONE, NONE, QSGMII_FM2_B, NONE, + NONE, QSGMII_FM1_A, NONE, NONE} }, + {40, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + NONE, QSGMII_FM1_A, NONE, NONE} }, + {46, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + NONE, QSGMII_FM1_A, NONE, NONE} }, + {48, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6, + SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9, + NONE, QSGMII_FM1_A, NONE, NONE} }, + {50, {XAUI_FM2_MAC9, XAUI_FM2_MAC9, + XAUI_FM2_MAC9, XAUI_FM2_MAC9, + NONE, NONE, NONE, NONE} }, + {52, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + NONE, NONE, NONE, NONE} }, + {54, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + HIGIG_FM2_MAC9, HIGIG_FM2_MAC9, + NONE, NONE, NONE, NONE} }, + {56, {NONE, XFI_FM1_MAC10, + XFI_FM2_MAC10, NONE, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4} }, + {57, {NONE, XFI_FM1_MAC10, + XFI_FM2_MAC10, NONE, + SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2, + NONE, NONE} }, + {} +}; +static const struct serdes_config serdes3_cfg_tbl[] = { + /* SerDes 3 */ + {2, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1} }, + {4, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2} }, + {6, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1} }, + {8, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, NONE, NONE, NONE} }, + {9, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN} }, + {10, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN} }, + {12, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + PCIE2, PCIE2, PCIE2, PCIE2} }, + {14, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + PCIE2, PCIE2, PCIE2, PCIE2} }, + {16, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + SRIO1, SRIO1, SRIO1, SRIO1} }, + {17, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + SRIO1, SRIO1, SRIO1, SRIO1} }, + {19, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + SRIO1, SRIO1, SRIO1, SRIO1} }, + {20, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN, + NONE, NONE, NONE, NONE} }, + {} +}; +static const struct serdes_config serdes4_cfg_tbl[] = { + /* SerDes 4 */ + {4, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4} }, + {6, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2} }, + {8, {SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2, SRIO2} }, + {10, {PCIE3, PCIE3, PCIE3, PCIE3, SATA1, SATA1, SATA2, SATA2} }, + {12, {AURORA, AURORA, AURORA, AURORA, SATA1, SATA1, SATA2, SATA2} }, + {14, {AURORA, AURORA, AURORA, AURORA, SRIO2, SRIO2, SRIO2, SRIO2} }, + {16, {AURORA, AURORA, AURORA, AURORA, SRIO2, SRIO2, SRIO2, SRIO2} }, + {18, {AURORA, AURORA, AURORA, AURORA, AURORA, AURORA, AURORA, AURORA} }, + {} +} +; +#else +#error "Need to define SerDes protocol" +#endif +static const struct serdes_config *serdes_cfg_tbl[] = { serdes1_cfg_tbl, serdes2_cfg_tbl, serdes3_cfg_tbl, @@ -196,7 +328,7 @@ static struct serdes_config *serdes_cfg_tbl[] = { enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane) { - struct serdes_config *ptr; + const struct serdes_config *ptr; if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) return 0; @@ -213,7 +345,7 @@ enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane) int is_serdes_prtcl_valid(int serdes, u32 prtcl) { int i; - struct serdes_config *ptr; + const struct serdes_config *ptr; if (serdes >= ARRAY_SIZE(serdes_cfg_tbl)) return 0; diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c index 39525fb29..0087cd029 100644 --- a/arch/powerpc/cpu/mpc8xxx/cpu.c +++ b/arch/powerpc/cpu/mpc8xxx/cpu.c @@ -77,6 +77,7 @@ static struct cpu_type cpu_type_list[] = { CPU_TYPE_ENTRY(P5040, P5040, 4), CPU_TYPE_ENTRY(T4240, T4240, 0), CPU_TYPE_ENTRY(T4120, T4120, 0), + CPU_TYPE_ENTRY(T4160, T4160, 0), CPU_TYPE_ENTRY(B4860, B4860, 0), CPU_TYPE_ENTRY(G4860, G4860, 0), CPU_TYPE_ENTRY(G4060, G4060, 0), diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c index 5311a262a..7a8636de1 100644 --- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c +++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c @@ -186,7 +186,7 @@ const char * step_to_string(unsigned int step) { return step_string_tbl[s]; } -unsigned long long step_assign_addresses(fsl_ddr_info_t *pinfo, +static unsigned long long __step_assign_addresses(fsl_ddr_info_t *pinfo, unsigned int dbw_cap_adj[]) { int i, j; @@ -354,6 +354,11 @@ unsigned long long step_assign_addresses(fsl_ddr_info_t *pinfo, return total_mem; } +/* Use weak function to allow board file to override the address assignment */ +__attribute__((weak, alias("__step_assign_addresses"))) +unsigned long long step_assign_addresses(fsl_ddr_info_t *pinfo, + unsigned int dbw_cap_adj[]); + unsigned long long fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step, unsigned int size_only) @@ -541,14 +546,17 @@ phys_size_t fsl_ddr_sdram(void) total_memory = fsl_ddr_compute(&info, STEP_GET_SPD, 0); /* setup 3-way interleaving before enabling DDRC */ - switch (info.memctl_opts[0].memctl_interleaving_mode) { - case FSL_DDR_3WAY_1KB_INTERLEAVING: - case FSL_DDR_3WAY_4KB_INTERLEAVING: - case FSL_DDR_3WAY_8KB_INTERLEAVING: - fsl_ddr_set_intl3r(info.memctl_opts[0].memctl_interleaving_mode); - break; - default: - break; + if (info.memctl_opts[0].memctl_interleaving) { + switch (info.memctl_opts[0].memctl_interleaving_mode) { + case FSL_DDR_3WAY_1KB_INTERLEAVING: + case FSL_DDR_3WAY_4KB_INTERLEAVING: + case FSL_DDR_3WAY_8KB_INTERLEAVING: + fsl_ddr_set_intl3r( + info.memctl_opts[0].memctl_interleaving_mode); + break; + default: + break; + } } /* Program configuration registers. */ diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 7267611cb..757194140 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -537,13 +537,45 @@ #define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 -#define CONFIG_SYS_FSL_USB1_PHY_ENABLE -#define CONFIG_SYS_FSL_USB2_PHY_ENABLE +#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE +#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY +#define CONFIG_SYS_FSL_ERRATUM_A004468 +#define CONFIG_SYS_FSL_ERRATUM_A_004934 +#define CONFIG_SYS_FSL_ERRATUM_A005871 +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 + +#elif defined(CONFIG_PPC_T4160) +#define CONFIG_SYS_PPC64 /* 64-bit core */ +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ +#define CONFIG_SYS_FSL_QORIQ_CHASSIS2 /* Freescale Chassis generation 2 */ +#define CONFIG_SYS_FSL_QMAN_V3 /* QMAN version 3 */ +#define CONFIG_MAX_CPUS 8 +#define CONFIG_SYS_FSL_NUM_CC_PLLS 5 +#define CONFIG_SYS_FSL_NUM_LAWS 32 +#define CONFIG_SYS_FSL_SRDS_3 +#define CONFIG_SYS_FSL_SRDS_4 +#define CONFIG_SYS_FSL_SEC_COMPAT 4 +#define CONFIG_SYS_NUM_FMAN 2 +#define CONFIG_SYS_NUM_FM1_DTSEC 7 +#define CONFIG_SYS_NUM_FM1_10GEC 1 +#define CONFIG_SYS_NUM_FM2_DTSEC 7 +#define CONFIG_SYS_NUM_FM2_10GEC 1 +#define CONFIG_NUM_DDR_CONTROLLERS 2 +#define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_4_7 +#define CONFIG_SYS_FMAN_V3 +#define CONFIG_SYS_FM_MURAM_SIZE 0x60000 +#define CONFIG_SYS_FSL_TBCLK_DIV 16 +#define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v3.0" +#define CONFIG_SYS_FSL_SRIO_MAX_PORTS 2 +#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM 9 +#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM 5 +#define CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY #define CONFIG_SYS_FSL_ERRATUM_A004468 #define CONFIG_SYS_FSL_ERRATUM_A_004934 #define CONFIG_SYS_FSL_ERRATUM_A005871 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 +#define CONFIG_SYS_FSL_PCI_VER_3_X #elif defined(CONFIG_PPC_B4420) #define CONFIG_SYS_PPC64 /* 64-bit core */ diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index baaa9fee5..28fe1d22c 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -1676,18 +1676,17 @@ typedef struct cpc_corenet { /* Global Utilities Block */ #ifdef CONFIG_FSL_CORENET typedef struct ccsr_gur { - u32 porsr1; /* POR status */ - u8 res1[28]; + u32 porsr1; /* POR status 1 */ + u32 porsr2; /* POR status 2 */ + u8 res_008[0x20-0x8]; u32 gpporcr1; /* General-purpose POR configuration */ - u8 res2[12]; - u32 gpiocr; /* GPIO control */ - u8 res3[12]; - u32 gpoutdr; /* General-purpose output data */ - u8 res4[12]; - u32 gpindr; /* General-purpose input data */ - u8 res5[12]; - u32 alt_pmuxcr; /* Alt function signal multiplex control */ - u8 res6[12]; + u32 gpporcr2; /* General-purpose POR configuration 2 */ + u32 dcfg_fusesr; /* Fuse status register */ +#define FSL_CORENET_DCFG_FUSESR_VID_SHIFT 25 +#define FSL_CORENET_DCFG_FUSESR_VID_MASK 0x1F +#define FSL_CORENET_DCFG_FUSESR_ALTVID_SHIFT 20 +#define FSL_CORENET_DCFG_FUSESR_ALTVID_MASK 0x1F + u8 res_02c[0x70-0x2c]; u32 devdisr; /* Device disable control */ u32 devdisr2; /* Device disable control 2 */ u32 devdisr3; /* Device disable control 3 */ @@ -1831,7 +1830,7 @@ typedef struct ccsr_gur { #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2 #define FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT 16 #define FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK 0x3f -#if defined(CONFIG_PPC_T4240) +#if defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160) #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xfc000000 #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 26 #define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00fe0000 @@ -1899,7 +1898,7 @@ typedef struct ccsr_gur { #define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_MII 0x00100000 #define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_NONE 0x00180000 #endif -#if defined(CONFIG_PPC_T4240) +#if defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160) #define FSL_CORENET_RCWSR13_EC1 0x60000000 /* bits 417..418 */ #define FSL_CORENET_RCWSR13_EC1_FM2_DTSEC5_RGMII 0x00000000 #define FSL_CORENET_RCWSR13_EC1_FM2_GPIO 0x40000000 @@ -2829,12 +2828,53 @@ typedef struct ccsr_pme { u8 res4[0x400]; } ccsr_pme_t; +#ifdef CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE +struct ccsr_usb_port_ctrl { + u32 ctrl; + u32 drvvbuscfg; + u32 pwrfltcfg; + u32 sts; + u8 res_14[0xc]; + u32 bistcfg; + u32 biststs; + u32 abistcfg; + u32 abiststs; + u8 res_30[0x10]; + u32 xcvrprg; + u32 anaprg; + u32 anadrv; + u32 anasts; +}; + +typedef struct ccsr_usb_phy { + u32 id; + struct ccsr_usb_port_ctrl port1; + u8 res_50[0xc]; + u32 tvr; + u32 pllprg[4]; + u8 res_70[0x4]; + u32 anaccfg; + u32 dbg; + u8 res_7c[0x4]; + struct ccsr_usb_port_ctrl port2; + u8 res_dc[0x334]; +} ccsr_usb_phy_t; + +#define CONFIG_SYS_FSL_USB_CTRL_PHY_EN (1 << 0) +#define CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN (1 << 1) +#define CONFIG_SYS_FSL_USB_PWRFLT_CR_EN (1 << 1) +#define CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN (1 << 0) +#define CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN (1 << 1) +#define CONFIG_SYS_FSL_USB_PLLPRG2_MFI (5 << 16) +#define CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN (1 << 21) +#else typedef struct ccsr_usb_phy { u8 res0[0x18]; u32 usb_enable_override; u8 res[0xe4]; } ccsr_usb_phy_t; #define CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE 1 +#endif #ifdef CONFIG_SYS_FSL_RAID_ENGINE struct ccsr_raide { diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 8c91f0849..5c0c438e6 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -575,6 +575,16 @@ #define SPRN_MSSSR0 0x3f7 #endif +#define SPRN_HDBCR0 0x3d0 +#define SPRN_HDBCR1 0x3d1 +#define SPRN_HDBCR2 0x3d2 +#define SPRN_HDBCR3 0x3d3 +#define SPRN_HDBCR4 0x3d4 +#define SPRN_HDBCR5 0x3d5 +#define SPRN_HDBCR6 0x3d6 +#define SPRN_HDBCR7 0x277 +#define SPRN_HDBCR8 0x278 + /* Short-hand versions for a number of the above SPRNs */ #define CTR SPRN_CTR /* Counter Register */ @@ -1099,6 +1109,7 @@ #define SVR_P5040 0x820400 #define SVR_T4240 0x824000 #define SVR_T4120 0x824001 +#define SVR_T4160 0x824100 #define SVR_B4860 0X868000 #define SVR_G4860 0x868001 #define SVR_G4060 0x868003 diff --git a/board/freescale/b4860qds/ddr.c b/board/freescale/b4860qds/ddr.c index dd4c0f69e..b82b3d409 100644 --- a/board/freescale/b4860qds/ddr.c +++ b/board/freescale/b4860qds/ddr.c @@ -13,6 +13,7 @@ #include <asm/fsl_ddr_sdram.h> #include <asm/fsl_ddr_dimm_params.h> #include <asm/fsl_law.h> +#include <../arch/powerpc/cpu/mpc8xxx/ddr/ddr.h> DECLARE_GLOBAL_DATA_PTR; @@ -188,3 +189,74 @@ phys_size_t initdram(int board_type) puts(" DDR: "); return dram_size; } + +unsigned long long step_assign_addresses(fsl_ddr_info_t *pinfo, + unsigned int dbw_cap_adj[]) +{ + int i, j; + unsigned long long total_mem, current_mem_base, total_ctlr_mem; + unsigned long long rank_density, ctlr_density = 0; + + current_mem_base = 0ull; + total_mem = 0; + /* + * This board has soldered DDR chips. DDRC1 has two rank. + * DDRC2 has only one rank. + * Assigning DDRC2 to lower address and DDRC1 to higher address. + */ + if (pinfo->memctl_opts[0].memctl_interleaving) { + rank_density = pinfo->dimm_params[0][0].rank_density >> + dbw_cap_adj[0]; + ctlr_density = rank_density; + + debug("rank density is 0x%llx, ctlr density is 0x%llx\n", + rank_density, ctlr_density); + for (i = CONFIG_NUM_DDR_CONTROLLERS - 1; i >= 0; i--) { + switch (pinfo->memctl_opts[i].memctl_interleaving_mode) { + case FSL_DDR_CACHE_LINE_INTERLEAVING: + case FSL_DDR_PAGE_INTERLEAVING: + case FSL_DDR_BANK_INTERLEAVING: + case FSL_DDR_SUPERBANK_INTERLEAVING: + total_ctlr_mem = 2 * ctlr_density; + break; + default: + panic("Unknown interleaving mode"); + } + pinfo->common_timing_params[i].base_address = + current_mem_base; + pinfo->common_timing_params[i].total_mem = + total_ctlr_mem; + total_mem = current_mem_base + total_ctlr_mem; + debug("ctrl %d base 0x%llx\n", i, current_mem_base); + debug("ctrl %d total 0x%llx\n", i, total_ctlr_mem); + } + } else { + /* + * Simple linear assignment if memory + * controllers are not interleaved. + */ + for (i = CONFIG_NUM_DDR_CONTROLLERS - 1; i >= 0; i--) { + total_ctlr_mem = 0; + pinfo->common_timing_params[i].base_address = + current_mem_base; + for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) { + /* Compute DIMM base addresses. */ + unsigned long long cap = + pinfo->dimm_params[i][j].capacity; + pinfo->dimm_params[i][j].base_address = + current_mem_base; + debug("ctrl %d dimm %d base 0x%llx\n", + i, j, current_mem_base); + current_mem_base += cap; + total_ctlr_mem += cap; + } + debug("ctrl %d total 0x%llx\n", i, total_ctlr_mem); + pinfo->common_timing_params[i].total_mem = + total_ctlr_mem; + total_mem += total_ctlr_mem; + } + } + debug("Total mem by %s is 0x%llx\n", __func__, total_mem); + + return total_mem; +} diff --git a/board/freescale/t4qds/ddr.c b/board/freescale/t4qds/ddr.c index 692616aed..058d62511 100644 --- a/board/freescale/t4qds/ddr.c +++ b/board/freescale/t4qds/ddr.c @@ -19,6 +19,7 @@ DECLARE_GLOBAL_DATA_PTR; struct board_specific_parameters { u32 n_ranks; u32 datarate_mhz_high; + u32 rank_gb; u32 clk_adjust; u32 wrlvl_start; u32 wrlvl_ctl_2; @@ -36,16 +37,19 @@ struct board_specific_parameters { static const struct board_specific_parameters udimm0[] = { /* * memory controller 0 - * num| hi| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T - * ranks| mhz|adjst| start | ctl2 | ctl3 | |delay | + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | */ - {2, 1350, 5, 7, 0x0809090b, 0x0c0c0d09, 0xff, 2, 0}, - {2, 1666, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, - {2, 2140, 5, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, - {1, 1350, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, - {1, 1700, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, - {1, 1900, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0}, - {1, 2140, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, + {2, 1350, 4, 4, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, + {2, 1350, 0, 5, 7, 0x0709090b, 0x0c0c0d09, 0xff, 2, 0}, + {2, 1666, 4, 4, 8, 0x080a0a0d, 0x0d10100b, 0xff, 2, 0}, + {2, 1666, 0, 5, 7, 0x080a0a0c, 0x0d0d0e0a, 0xff, 2, 0}, + {2, 1900, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0}, + {2, 2140, 0, 4, 8, 0x090a0b0e, 0x0f11120c, 0xff, 2, 0}, + {1, 1350, 0, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, + {1, 1700, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, + {1, 1900, 0, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0}, + {1, 2140, 0, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, {} }; @@ -61,19 +65,19 @@ static const struct board_specific_parameters *udimms[] = { static const struct board_specific_parameters rdimm0[] = { /* * memory controller 0 - * num| hi| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T - * ranks| mhz|adjst| start | ctl2 | ctl3 | |delay | + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl | cpo |wrdata|2T + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 | |delay | */ - {4, 1350, 5, 9, 0x08070605, 0x07080805, 0xff, 2, 0}, - {4, 1666, 5, 8, 0x08070605, 0x07080805, 0xff, 2, 0}, - {4, 2140, 5, 8, 0x08070605, 0x07081805, 0xff, 2, 0}, - {2, 1350, 5, 7, 0x0809090b, 0x0c0c0d09, 0xff, 2, 0}, - {2, 1666, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, - {2, 2140, 5, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, - {1, 1350, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, - {1, 1700, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, - {1, 1900, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0}, - {1, 2140, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, + {4, 1350, 0, 5, 9, 0x08070605, 0x07080805, 0xff, 2, 0}, + {4, 1666, 0, 5, 8, 0x08070605, 0x07080805, 0xff, 2, 0}, + {4, 2140, 0, 5, 8, 0x08070605, 0x07081805, 0xff, 2, 0}, + {2, 1350, 0, 5, 7, 0x0809090b, 0x0c0c0d09, 0xff, 2, 0}, + {2, 1666, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, + {2, 2140, 0, 5, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, + {1, 1350, 0, 5, 8, 0x0809090b, 0x0c0c0d0a, 0xff, 2, 0}, + {1, 1700, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a, 0xff, 2, 0}, + {1, 1900, 0, 4, 8, 0x080a0a0c, 0x0e0e0f0a, 0xff, 2, 0}, + {1, 2140, 0, 4, 8, 0x090a0b0c, 0x0e0f100b, 0xff, 2, 0}, {} }; @@ -113,7 +117,8 @@ void fsl_ddr_board_options(memctl_options_t *popts, */ ddr_freq = get_ddr_freq(0) / 1000000; while (pbsp->datarate_mhz_high) { - if (pbsp->n_ranks == pdimm->n_ranks) { + if (pbsp->n_ranks == pdimm->n_ranks && + (pdimm->rank_density >> 30) >= pbsp->rank_gb) { if (ddr_freq <= pbsp->datarate_mhz_high) { popts->cpo_override = pbsp->cpo; popts->write_data_delay = @@ -146,6 +151,13 @@ void fsl_ddr_board_options(memctl_options_t *popts, panic("DIMM is not supported by this board"); } found: + debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n" + "\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, " + "wrlvl_ctrl_3 0x%x\n", + pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb, + pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2, + pbsp->wrlvl_ctl_3); + /* * Factors to consider for half-strength driver enable: * - number of DIMMs installed diff --git a/board/freescale/t4qds/eth.c b/board/freescale/t4qds/eth.c index a49c7d4f1..b649df0f3 100644 --- a/board/freescale/t4qds/eth.c +++ b/board/freescale/t4qds/eth.c @@ -52,7 +52,7 @@ #define EMI1_SLOT4 4 #define EMI1_SLOT5 5 #define EMI1_SLOT7 7 -#define EMI2 8 /* tmp, FIXME */ +#define EMI2 8 /* Slot6 and Slot8 do not have EMI connections */ static int mdio_mux[NUM_FM_PORTS]; @@ -71,6 +71,14 @@ static const char *mdio_names[] = { static u8 lane_to_slot_fsm1[] = {1, 1, 1, 1, 2, 2, 2, 2}; static u8 lane_to_slot_fsm2[] = {3, 3, 3, 3, 4, 4, 4, 4}; +static u8 slot_qsgmii_phyaddr[5][4] = { + {0, 0, 0, 0},/* not used, to make index match slot No. */ + {0, 1, 2, 3}, + {4, 5, 6, 7}, + {8, 9, 0xa, 0xb}, + {0xc, 0xd, 0xe, 0xf}, +}; +static u8 qsgmiiphy_fix[NUM_FM_PORTS] = {0}; static const char *t4240qds_mdio_name_for_muxval(u8 muxval) { @@ -180,21 +188,212 @@ static int t4240qds_mdio_init(char *realbusname, u8 muxval) void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa, enum fm_port port, int offset) { - if (mdio_mux[port] == EMI1_RGMII) - fdt_set_phy_handle(blob, prop, pa, "phy_rgmii"); - - /* TODO: will do with dts */ + if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) { + switch (port) { + case FM1_DTSEC1: + if (qsgmiiphy_fix[port]) + fdt_set_phy_handle(blob, prop, pa, + "sgmii_phy21"); + break; + case FM1_DTSEC2: + if (qsgmiiphy_fix[port]) + fdt_set_phy_handle(blob, prop, pa, + "sgmii_phy22"); + break; + case FM1_DTSEC3: + if (qsgmiiphy_fix[port]) + fdt_set_phy_handle(blob, prop, pa, + "sgmii_phy23"); + break; + case FM1_DTSEC4: + if (qsgmiiphy_fix[port]) + fdt_set_phy_handle(blob, prop, pa, + "sgmii_phy24"); + break; + case FM1_DTSEC6: + if (qsgmiiphy_fix[port]) + fdt_set_phy_handle(blob, prop, pa, + "sgmii_phy12"); + break; + case FM1_DTSEC9: + if (qsgmiiphy_fix[port]) + fdt_set_phy_handle(blob, prop, pa, + "sgmii_phy14"); + else + fdt_set_phy_handle(blob, prop, pa, + "phy_sgmii4"); + break; + case FM1_DTSEC10: + if (qsgmiiphy_fix[port]) + fdt_set_phy_handle(blob, prop, pa, + "sgmii_phy13"); + else + fdt_set_phy_handle(blob, prop, pa, + "phy_sgmii3"); + break; + case FM2_DTSEC1: + if (qsgmiiphy_fix[port]) + fdt_set_phy_handle(blob, prop, pa, + "sgmii_phy41"); + break; + case FM2_DTSEC2: + if (qsgmiiphy_fix[port]) + fdt_set_phy_handle(blob, prop, pa, + "sgmii_phy42"); + break; + case FM2_DTSEC3: + if (qsgmiiphy_fix[port]) + fdt_set_phy_handle(blob, prop, pa, + "sgmii_phy43"); + break; + case FM2_DTSEC4: + if (qsgmiiphy_fix[port]) + fdt_set_phy_handle(blob, prop, pa, + "sgmii_phy44"); + break; + case FM2_DTSEC6: + if (qsgmiiphy_fix[port]) + fdt_set_phy_handle(blob, prop, pa, + "sgmii_phy32"); + break; + case FM2_DTSEC9: + if (qsgmiiphy_fix[port]) + fdt_set_phy_handle(blob, prop, pa, + "sgmii_phy34"); + else + fdt_set_phy_handle(blob, prop, pa, + "phy_sgmii12"); + break; + case FM2_DTSEC10: + if (qsgmiiphy_fix[port]) + fdt_set_phy_handle(blob, prop, pa, + "sgmii_phy33"); + else + fdt_set_phy_handle(blob, prop, pa, + "phy_sgmii11"); + break; + default: + break; + } + } } void fdt_fixup_board_enet(void *fdt) { - /* TODO: will do with dts */ + int i; + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 prtcl2 = in_be32(&gur->rcwsr[4]) & FSL_CORENET2_RCWSR4_SRDS2_PRTCL; + + prtcl2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; + for (i = FM1_DTSEC1; i < NUM_FM_PORTS; i++) { + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_SGMII: + switch (mdio_mux[i]) { + case EMI1_SLOT1: + fdt_status_okay_by_alias(fdt, "emi1_slot1"); + break; + case EMI1_SLOT2: + fdt_status_okay_by_alias(fdt, "emi1_slot2"); + break; + case EMI1_SLOT3: + fdt_status_okay_by_alias(fdt, "emi1_slot3"); + break; + case EMI1_SLOT4: + fdt_status_okay_by_alias(fdt, "emi1_slot4"); + break; + default: + break; + } + break; + case PHY_INTERFACE_MODE_XGMII: + /* check if it's XFI interface for 10g */ + if ((prtcl2 == 56) || (prtcl2 == 57)) { + fdt_status_okay_by_alias(fdt, "emi2_xfislot3"); + break; + } + switch (i) { + case FM1_10GEC1: + fdt_status_okay_by_alias(fdt, "emi2_xauislot1"); + break; + case FM1_10GEC2: + fdt_status_okay_by_alias(fdt, "emi2_xauislot2"); + break; + case FM2_10GEC1: + fdt_status_okay_by_alias(fdt, "emi2_xauislot3"); + break; + case FM2_10GEC2: + fdt_status_okay_by_alias(fdt, "emi2_xauislot4"); + break; + default: + break; + } + break; + default: + break; + } + } +} + +static void initialize_qsgmiiphy_fix(void) +{ + int i; + unsigned short reg; + + for (i = 1; i <= 4; i++) { + /* + * Try to read if a SGMII card is used, we do it slot by slot. + * if a SGMII PHY address is valid on a slot, then we mark + * all ports on the slot, then fix the PHY address for the + * marked port when doing dtb fixup. + */ + if (miiphy_read(mdio_names[i], + SGMII_CARD_PORT1_PHY_ADDR, MII_PHYSID2, ®) != 0) { + debug("Slot%d PHY ID register 2 read failed\n", i); + continue; + } + + debug("Slot%d MII_PHYSID2 @ 0x1c= 0x%04x\n", i, reg); + + if (reg == 0xFFFF) { + /* No physical device present at this address */ + continue; + } + + switch (i) { + case 1: + qsgmiiphy_fix[FM1_DTSEC5] = 1; + qsgmiiphy_fix[FM1_DTSEC6] = 1; + qsgmiiphy_fix[FM1_DTSEC9] = 1; + qsgmiiphy_fix[FM1_DTSEC10] = 1; + break; + case 2: + qsgmiiphy_fix[FM1_DTSEC1] = 1; + qsgmiiphy_fix[FM1_DTSEC2] = 1; + qsgmiiphy_fix[FM1_DTSEC3] = 1; + qsgmiiphy_fix[FM1_DTSEC4] = 1; + break; + case 3: + qsgmiiphy_fix[FM2_DTSEC5] = 1; + qsgmiiphy_fix[FM2_DTSEC6] = 1; + qsgmiiphy_fix[FM2_DTSEC9] = 1; + qsgmiiphy_fix[FM2_DTSEC10] = 1; + break; + case 4: + qsgmiiphy_fix[FM2_DTSEC1] = 1; + qsgmiiphy_fix[FM2_DTSEC2] = 1; + qsgmiiphy_fix[FM2_DTSEC3] = 1; + qsgmiiphy_fix[FM2_DTSEC4] = 1; + break; + default: + break; + } + } } int board_eth_init(bd_t *bis) { #if defined(CONFIG_FMAN_ENET) - int i; + int i, idx, lane, slot; struct memac_mdio_info dtsec_mdio_info; struct memac_mdio_info tgec_mdio_info; ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); @@ -248,44 +447,48 @@ int board_eth_init(bd_t *bis) case 28: case 36: /* SGMII in Slot1 and Slot2 */ - fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC1, slot_qsgmii_phyaddr[2][0]); + fm_info_set_phy_address(FM1_DTSEC2, slot_qsgmii_phyaddr[2][1]); + fm_info_set_phy_address(FM1_DTSEC3, slot_qsgmii_phyaddr[2][2]); + fm_info_set_phy_address(FM1_DTSEC4, slot_qsgmii_phyaddr[2][3]); + fm_info_set_phy_address(FM1_DTSEC5, slot_qsgmii_phyaddr[1][0]); + fm_info_set_phy_address(FM1_DTSEC6, slot_qsgmii_phyaddr[1][1]); if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) { fm_info_set_phy_address(FM1_DTSEC9, - SGMII_CARD_PORT4_PHY_ADDR); + slot_qsgmii_phyaddr[1][3]); fm_info_set_phy_address(FM1_DTSEC10, - SGMII_CARD_PORT3_PHY_ADDR); + slot_qsgmii_phyaddr[1][2]); } break; case 38: - fm_info_set_phy_address(FM1_DTSEC5, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC6, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC1, slot_qsgmii_phyaddr[2][0]); + fm_info_set_phy_address(FM1_DTSEC2, slot_qsgmii_phyaddr[2][1]); + fm_info_set_phy_address(FM1_DTSEC3, slot_qsgmii_phyaddr[2][2]); + fm_info_set_phy_address(FM1_DTSEC4, slot_qsgmii_phyaddr[2][3]); + fm_info_set_phy_address(FM1_DTSEC5, slot_qsgmii_phyaddr[1][0]); + fm_info_set_phy_address(FM1_DTSEC6, slot_qsgmii_phyaddr[1][1]); if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) { fm_info_set_phy_address(FM1_DTSEC9, - QSGMII_CARD_PHY_ADDR); + slot_qsgmii_phyaddr[1][3]); fm_info_set_phy_address(FM1_DTSEC10, - QSGMII_CARD_PHY_ADDR); + slot_qsgmii_phyaddr[1][2]); } break; case 40: case 46: case 48: - fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC5, slot_qsgmii_phyaddr[1][0]); + fm_info_set_phy_address(FM1_DTSEC6, slot_qsgmii_phyaddr[1][1]); if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) { fm_info_set_phy_address(FM1_DTSEC10, - SGMII_CARD_PORT3_PHY_ADDR); + slot_qsgmii_phyaddr[1][3]); fm_info_set_phy_address(FM1_DTSEC9, - SGMII_CARD_PORT4_PHY_ADDR); + slot_qsgmii_phyaddr[1][2]); } - fm_info_set_phy_address(FM1_DTSEC1, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC2, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC3, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC4, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM1_DTSEC1, slot_qsgmii_phyaddr[2][0]); + fm_info_set_phy_address(FM1_DTSEC2, slot_qsgmii_phyaddr[2][1]); + fm_info_set_phy_address(FM1_DTSEC3, slot_qsgmii_phyaddr[2][2]); + fm_info_set_phy_address(FM1_DTSEC4, slot_qsgmii_phyaddr[2][3]); break; default: puts("Invalid SerDes1 protocol for T4240QDS\n"); @@ -293,7 +496,7 @@ int board_eth_init(bd_t *bis) } for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { - int idx = i - FM1_DTSEC1, lane, slot; + idx = i - FM1_DTSEC1; switch (fm_info_get_enet_if(i)) { case PHY_INTERFACE_MODE_SGMII: lane = serdes_get_first_lane(FSL_SRDS_1, @@ -334,8 +537,16 @@ int board_eth_init(bd_t *bis) } for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) { + idx = i - FM1_10GEC1; switch (fm_info_get_enet_if(i)) { case PHY_INTERFACE_MODE_XGMII: + lane = serdes_get_first_lane(FSL_SRDS_1, + XAUI_FM1_MAC9 + idx); + if (lane < 0) + break; + slot = lane_to_slot_fsm1[lane]; + if (QIXIS_READ(present2) & (1 << (slot - 1))) + fm_disable_port(i); mdio_mux[i] = EMI2; fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); break; @@ -344,7 +555,6 @@ int board_eth_init(bd_t *bis) } } - #if (CONFIG_SYS_NUM_FMAN == 2) switch (srds_prtcl_s2) { case 1: @@ -364,68 +574,64 @@ int board_eth_init(bd_t *bis) case 26: /* XAUI/HiGig in Slot3, SGMII in Slot4 */ fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]); + fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]); + fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]); + fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]); break; case 28: case 36: /* SGMII in Slot3 and Slot4 */ - fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC9, SGMII_CARD_PORT4_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC10, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]); + fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]); + fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]); + fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]); + fm_info_set_phy_address(FM2_DTSEC5, slot_qsgmii_phyaddr[3][0]); + fm_info_set_phy_address(FM2_DTSEC6, slot_qsgmii_phyaddr[3][1]); + fm_info_set_phy_address(FM2_DTSEC9, slot_qsgmii_phyaddr[3][3]); + fm_info_set_phy_address(FM2_DTSEC10, slot_qsgmii_phyaddr[3][2]); break; case 38: /* QSGMII in Slot3 and Slot4 */ - fm_info_set_phy_address(FM2_DTSEC1, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC2, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC3, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC4, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC5, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC6, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC9, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC10, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]); + fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]); + fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]); + fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]); + fm_info_set_phy_address(FM2_DTSEC5, slot_qsgmii_phyaddr[3][0]); + fm_info_set_phy_address(FM2_DTSEC6, slot_qsgmii_phyaddr[3][1]); + fm_info_set_phy_address(FM2_DTSEC9, slot_qsgmii_phyaddr[3][3]); + fm_info_set_phy_address(FM2_DTSEC10, slot_qsgmii_phyaddr[3][2]); break; case 40: case 46: case 48: /* SGMII in Slot3 */ - fm_info_set_phy_address(FM2_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC9, SGMII_CARD_PORT4_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC10, SGMII_CARD_PORT3_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC5, slot_qsgmii_phyaddr[3][0]); + fm_info_set_phy_address(FM2_DTSEC6, slot_qsgmii_phyaddr[3][1]); + fm_info_set_phy_address(FM2_DTSEC9, slot_qsgmii_phyaddr[3][3]); + fm_info_set_phy_address(FM2_DTSEC10, slot_qsgmii_phyaddr[3][2]); /* QSGMII in Slot4 */ - fm_info_set_phy_address(FM2_DTSEC1, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC2, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC3, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC4, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]); + fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]); + fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]); + fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]); break; case 50: case 52: case 54: fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC1, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC2, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC3, QSGMII_CARD_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC4, QSGMII_CARD_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]); + fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]); + fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]); + fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]); break; case 56: case 57: /* XFI in Slot3, SGMII in Slot4 */ - fm_info_set_phy_address(FM1_10GEC1, XFI_CARD_PORT1_PHY_ADDR); - fm_info_set_phy_address(FM1_10GEC2, XFI_CARD_PORT2_PHY_ADDR); - fm_info_set_phy_address(FM2_10GEC2, XFI_CARD_PORT3_PHY_ADDR); - fm_info_set_phy_address(FM2_10GEC1, XFI_CARD_PORT4_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR); + fm_info_set_phy_address(FM2_DTSEC1, slot_qsgmii_phyaddr[4][0]); + fm_info_set_phy_address(FM2_DTSEC2, slot_qsgmii_phyaddr[4][1]); + fm_info_set_phy_address(FM2_DTSEC3, slot_qsgmii_phyaddr[4][2]); + fm_info_set_phy_address(FM2_DTSEC4, slot_qsgmii_phyaddr[4][3]); break; default: puts("Invalid SerDes2 protocol for T4240QDS\n"); @@ -433,7 +639,7 @@ int board_eth_init(bd_t *bis) } for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) { - int idx = i - FM2_DTSEC1, lane, slot; + idx = i - FM2_DTSEC1; switch (fm_info_get_enet_if(i)) { case PHY_INTERFACE_MODE_SGMII: lane = serdes_get_first_lane(FSL_SRDS_2, @@ -477,8 +683,16 @@ int board_eth_init(bd_t *bis) } for (i = FM2_10GEC1; i < FM2_10GEC1 + CONFIG_SYS_NUM_FM2_10GEC; i++) { + idx = i - FM2_10GEC1; switch (fm_info_get_enet_if(i)) { case PHY_INTERFACE_MODE_XGMII: + lane = serdes_get_first_lane(FSL_SRDS_2, + XAUI_FM2_MAC9 + idx); + if (lane < 0) + break; + slot = lane_to_slot_fsm2[lane]; + if (QIXIS_READ(present2) & (1 << (slot - 1))) + fm_disable_port(i); mdio_mux[i] = EMI2; fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); break; @@ -488,6 +702,8 @@ int board_eth_init(bd_t *bis) } #endif /* CONFIG_SYS_NUM_FMAN */ + initialize_qsgmiiphy_fix(); + cpu_eth_init(bis); #endif /* CONFIG_FMAN_ENET */ diff --git a/board/freescale/t4qds/t4240qds_qixis.h b/board/freescale/t4qds/t4240qds_qixis.h index efb718d2c..485353d5a 100644 --- a/board/freescale/t4qds/t4240qds_qixis.h +++ b/board/freescale/t4qds/t4240qds_qixis.h @@ -42,7 +42,7 @@ #define QIXIS_DDRCLK_125 0x2 #define QIXIS_DDRCLK_133 0x3 -#define BRDCFG5_RESET 0x00 +#define BRDCFG5_IRE 0x20 /* i2c Remote i2c1 enable */ #define BRDCFG12_SD3EN_MASK 0x20 #define BRDCFG12_SD3MX_MASK 0x08 diff --git a/board/freescale/t4qds/t4qds.c b/board/freescale/t4qds/t4qds.c index 3c95f3fb7..be6d1c498 100644 --- a/board/freescale/t4qds/t4qds.c +++ b/board/freescale/t4qds/t4qds.c @@ -110,7 +110,7 @@ int checkboard(void) for (i = 0; i < MAX_SERDES; i++) { static const char *freq[] = { "100", "125", "156.25", "161.1328125"}; - unsigned int clock = (sw >> (2 * i)) & 3; + unsigned int clock = (sw >> (6 - 2 * i)) & 3; printf("SERDES%u=%sMHz ", i+1, freq[clock]); } @@ -132,6 +132,228 @@ int select_i2c_ch_pca9547(u8 ch) return 0; } +/* + * read_voltage from sensor on I2C bus + * We use average of 4 readings, waiting for 532us befor another reading + */ +#define NUM_READINGS 4 /* prefer to be power of 2 for efficiency */ +#define WAIT_FOR_ADC 532 /* wait for 532 microseconds for ADC */ + +static inline int read_voltage(void) +{ + int i, ret, voltage_read = 0; + u16 vol_mon; + + for (i = 0; i < NUM_READINGS; i++) { + ret = i2c_read(I2C_VOL_MONITOR_ADDR, + I2C_VOL_MONITOR_BUS_V_OFFSET, 1, (void *)&vol_mon, 2); + if (ret) { + printf("VID: failed to read core voltage\n"); + return ret; + } + if (vol_mon & I2C_VOL_MONITOR_BUS_V_OVF) { + printf("VID: Core voltage sensor error\n"); + return -1; + } + debug("VID: bus voltage reads 0x%04x\n", vol_mon); + /* LSB = 4mv */ + voltage_read += (vol_mon >> I2C_VOL_MONITOR_BUS_V_SHIFT) * 4; + udelay(WAIT_FOR_ADC); + } + /* calculate the average */ + voltage_read /= NUM_READINGS; + + return voltage_read; +} + +/* + * We need to calculate how long before the voltage starts to drop or increase + * It returns with the loop count. Each loop takes several readings (532us) + */ +static inline int wait_for_voltage_change(int vdd_last) +{ + int timeout, vdd_current; + + vdd_current = read_voltage(); + /* wait until voltage starts to drop */ + for (timeout = 0; abs(vdd_last - vdd_current) <= 4 && + timeout < 100; timeout++) { + vdd_current = read_voltage(); + } + if (timeout >= 100) { + printf("VID: Voltage adjustment timeout\n"); + return -1; + } + return timeout; +} + +/* + * argument 'wait' is the time we know the voltage difference can be measured + * this function keeps reading the voltage until it is stable + */ +static inline int wait_for_voltage_stable(int wait) +{ + int timeout, vdd_current, vdd_last; + + vdd_last = read_voltage(); + udelay(wait * NUM_READINGS * WAIT_FOR_ADC); + /* wait until voltage is stable */ + vdd_current = read_voltage(); + for (timeout = 0; abs(vdd_last - vdd_current) >= 4 && + timeout < 100; timeout++) { + vdd_last = vdd_current; + udelay(wait * NUM_READINGS * WAIT_FOR_ADC); + vdd_current = read_voltage(); + } + if (timeout >= 100) { + printf("VID: Voltage adjustment timeout\n"); + return -1; + } + + return vdd_current; +} + +static inline int set_voltage(u8 vid) +{ + int wait, vdd_last; + + vdd_last = read_voltage(); + QIXIS_WRITE(brdcfg[6], vid); + wait = wait_for_voltage_change(vdd_last); + if (wait < 0) + return -1; + debug("VID: Waited %d us\n", wait * NUM_READINGS * WAIT_FOR_ADC); + wait = wait ? wait : 1; + + vdd_last = wait_for_voltage_stable(wait); + if (vdd_last < 0) + return -1; + debug("VID: Current voltage is %d mV\n", vdd_last); + + return vdd_last; +} + + +static int adjust_vdd(void) +{ + int re_enable = disable_interrupts(); + ccsr_gur_t __iomem *gur = + (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 fusesr; + u8 vid, vid_current; + int vdd_target, vdd_current, vdd_last; + int ret; + static const uint16_t vdd[32] = { + 0, /* unused */ + 9875, /* 0.9875V */ + 9750, + 9625, + 9500, + 9375, + 9250, + 9125, + 9000, + 8875, + 8750, + 8625, + 8500, + 8375, + 8250, + 8125, + 10000, /* 1.0000V */ + 10125, + 10250, + 10375, + 10500, + 10625, + 10750, + 10875, + 11000, + 0, /* reserved */ + }; + struct vdd_drive { + u8 vid; + unsigned voltage; + }; + + ret = select_i2c_ch_pca9547(I2C_MUX_CH_VOL_MONITOR); + if (ret) { + debug("VID: I2c failed to switch channel\n"); + ret = -1; + goto exit; + } + + /* get the voltage ID from fuse status register */ + fusesr = in_be32(&gur->dcfg_fusesr); + vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_VID_SHIFT) & + FSL_CORENET_DCFG_FUSESR_VID_MASK; + if (vid == FSL_CORENET_DCFG_FUSESR_VID_MASK) { + vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_ALTVID_SHIFT) & + FSL_CORENET_DCFG_FUSESR_ALTVID_MASK; + } + vdd_target = vdd[vid]; + if (vdd_target == 0) { + debug("VID: VID not used\n"); + ret = 0; + goto exit; + } else { + /* round up and divice by 10 to get a value in mV */ + vdd_target = DIV_ROUND_UP(vdd_target, 10); + debug("VID: vid = %d mV\n", vdd_target); + } + + /* + * Check current board VID setting + * Voltage regulator support output to 6.250mv step + * The highes voltage allowed for this board is (vid=0x40) 1.21250V + * the lowest is (vid=0x7f) 0.81875V + */ + vid_current = QIXIS_READ(brdcfg[6]); + vdd_current = 121250 - (vid_current - 0x40) * 625; + debug("VID: Current vid setting is (0x%x) %d mV\n", + vid_current, vdd_current/100); + + /* + * Read voltage monitor to check real voltage. + * Voltage monitor LSB is 4mv. + */ + vdd_last = read_voltage(); + if (vdd_last < 0) { + printf("VID: Could not read voltage sensor abort VID adjustment\n"); + ret = -1; + goto exit; + } + debug("VID: Core voltage is at %d mV\n", vdd_last); + /* + * Adjust voltage to at or 8mV above target. + * Each step of adjustment is 6.25mV. + * Stepping down too fast may cause over current. + */ + while (vdd_last > 0 && vid_current < 0x80 && + vdd_last > (vdd_target + 8)) { + vid_current++; + vdd_last = set_voltage(vid_current); + } + /* + * Check if we need to step up + * This happens when board voltage switch was set too low + */ + while (vdd_last > 0 && vid_current >= 0x40 && + vdd_last < vdd_target + 2) { + vid_current--; + vdd_last = set_voltage(vid_current); + } + if (vdd_last > 0) + printf("VID: Core voltage %d mV\n", vdd_last); + else + ret = -1; + +exit: + if (re_enable) + enable_interrupts(); + return ret; +} + /* Configure Crossbar switches for Front-Side SerDes Ports */ int config_frontside_crossbar_vsc3316(void) { @@ -282,8 +504,15 @@ int board_early_init_r(void) setup_portals(); #endif - /* Disable remote I2C connectoin */ - QIXIS_WRITE(brdcfg[5], BRDCFG5_RESET); + /* Disable remote I2C connection to qixis fpga */ + QIXIS_WRITE(brdcfg[5], QIXIS_READ(brdcfg[5]) & ~BRDCFG5_IRE); + + /* + * Adjust core voltage according to voltage ID + * This function changes I2C mux to channel 2. + */ + if (adjust_vdd()) + printf("Warning: Adjusting core voltage failed.\n"); /* Configure board SERDES ports crossbar */ config_frontside_crossbar_vsc3316(); @@ -357,7 +586,7 @@ int misc_init_r(void) sw = QIXIS_READ(brdcfg[2]); for (i = 0; i < MAX_SERDES; i++) { - unsigned int clock = (sw >> (2 * i)) & 3; + unsigned int clock = (sw >> (6 - 2 * i)) & 3; switch (clock) { case 0: actual[i] = SRDS_PLLCR0_RFCK_SEL_100; diff --git a/boards.cfg b/boards.cfg index 403f4c3f6..05318a110 100644 --- a/boards.cfg +++ b/boards.cfg @@ -890,9 +890,12 @@ BSC9132QDS_SPIFLASH_DDRCLK133 powerpc mpc85xx bsc9132qds freesca stxgp3 powerpc mpc85xx stxgp3 stx stxssa powerpc mpc85xx stxssa stx - stxssa stxssa_4M powerpc mpc85xx stxssa stx - stxssa:STXSSA_4M -T4240QDS powerpc mpc85xx t4qds freescale -T4240QDS_SDCARD powerpc mpc85xx t4qds freescale - T4240QDS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 -T4240QDS_SPIFLASH powerpc mpc85xx t4qds freescale - T4240QDS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 +T4240QDS powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240 +T4240QDS_SDCARD powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 +T4240QDS_SPIFLASH powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 +T4160QDS powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4160 +T4160QDS_SDCARD powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4160,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000 +T4160QDS_SPIFLASH powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4160,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 B4860QDS powerpc mpc85xx b4860qds freescale - B4860QDS:PPC_B4860 B4860QDS_NAND powerpc mpc85xx b4860qds freescale - B4860QDS:PPC_B4860,RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000 B4860QDS_SPIFLASH powerpc mpc85xx b4860qds freescale - B4860QDS:PPC_B4860,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000 diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile index f191c79a2..9aaa82853 100644 --- a/drivers/net/fm/Makefile +++ b/drivers/net/fm/Makefile @@ -46,6 +46,7 @@ COBJS-$(CONFIG_PPC_P4080) += p4080.o COBJS-$(CONFIG_PPC_P5020) += p5020.o COBJS-$(CONFIG_PPC_P5040) += p5040.o COBJS-$(CONFIG_PPC_T4240) += t4240.o +COBJS-$(CONFIG_PPC_T4160) += t4240.o COBJS-$(CONFIG_PPC_B4420) += b4860.o COBJS-$(CONFIG_PPC_B4860) += b4860.o endif diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c index 54b142f47..9b139eeb0 100644 --- a/drivers/net/fm/eth.c +++ b/drivers/net/fm/eth.c @@ -568,6 +568,8 @@ static int fm_eth_init_mac(struct fm_eth *fm_eth, struct ccsr_fman *reg) num = fm_eth->num; #ifdef CONFIG_SYS_FMAN_V3 + if (fm_eth->type == FM_ETH_10G_E) + num += 8; base = ®->memac[num].fm_memac; phyregs = ®->memac[num].fm_memac_mdio; #else diff --git a/drivers/net/fm/fm.h b/drivers/net/fm/fm.h index 228df330f..ba581e9ef 100644 --- a/drivers/net/fm/fm.h +++ b/drivers/net/fm/fm.h @@ -152,4 +152,6 @@ struct fm_eth { #define MAX_RXBUF_LOG2 11 #define MAX_RXBUF_LEN (1 << MAX_RXBUF_LOG2) +#define PORT_IS_ENABLED(port) fm_info[fm_port_to_index(port)].enabled + #endif /* __FM_H__ */ diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c index ae389b884..5908c3254 100644 --- a/drivers/net/fm/init.c +++ b/drivers/net/fm/init.c @@ -74,9 +74,15 @@ struct fm_eth_info fm_info[] = { #if (CONFIG_SYS_NUM_FM1_10GEC >= 1) FM_TGEC_INFO_INITIALIZER(1, 1), #endif +#if (CONFIG_SYS_NUM_FM1_10GEC >= 2) + FM_TGEC_INFO_INITIALIZER(1, 2), +#endif #if (CONFIG_SYS_NUM_FM2_10GEC >= 1) FM_TGEC_INFO_INITIALIZER(2, 1), #endif +#if (CONFIG_SYS_NUM_FM2_10GEC >= 2) + FM_TGEC_INFO_INITIALIZER(2, 2), +#endif }; int fm_standard_init(bd_t *bis) @@ -232,6 +238,26 @@ static void ft_fixup_port(void *blob, struct fm_eth_info *info, char *prop) return ; } +#ifdef CONFIG_SYS_FMAN_V3 + /* + * Physically FM1_DTSEC9 and FM1_10GEC1 use the same dual-role MAC, when + * FM1_10GEC1 is enabled and FM1_DTSEC9 is disabled, ensure that the + * dual-role MAC is not disabled, ditto for other dual-role MACs. + */ + if (((info->port == FM1_DTSEC9) && (PORT_IS_ENABLED(FM1_10GEC1))) || + ((info->port == FM1_DTSEC10) && (PORT_IS_ENABLED(FM1_10GEC2))) || + ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC9))) || + ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC10))) +#if (CONFIG_SYS_NUM_FMAN == 2) + || + ((info->port == FM2_DTSEC9) && (PORT_IS_ENABLED(FM2_10GEC1))) || + ((info->port == FM2_DTSEC10) && (PORT_IS_ENABLED(FM2_10GEC2))) || + ((info->port == FM2_10GEC1) && (PORT_IS_ENABLED(FM2_DTSEC9))) || + ((info->port == FM2_10GEC2) && (PORT_IS_ENABLED(FM2_DTSEC10))) +#endif + ) + return; +#endif /* board code might have caused offset to change */ off = fdt_node_offset_by_compat_reg(blob, prop, paddr); @@ -249,10 +275,15 @@ void fdt_fixup_fman_ethernet(void *blob) { int i; +#ifdef CONFIG_SYS_FMAN_V3 + for (i = 0; i < ARRAY_SIZE(fm_info); i++) + ft_fixup_port(blob, &fm_info[i], "fsl,fman-memac"); +#else for (i = 0; i < ARRAY_SIZE(fm_info); i++) { if (fm_info[i].type == FM_ETH_1G_E) ft_fixup_port(blob, &fm_info[i], "fsl,fman-1g-mac"); else ft_fixup_port(blob, &fm_info[i], "fsl,fman-10g-mac"); } +#endif } diff --git a/drivers/net/fm/t4240.c b/drivers/net/fm/t4240.c index 48c530c91..275395f18 100644 --- a/drivers/net/fm/t4240.c +++ b/drivers/net/fm/t4240.c @@ -70,12 +70,18 @@ phy_interface_t fman_port_enet_if(enum fm_port port) if (is_device_disabled(port)) return PHY_INTERFACE_MODE_NONE; - if ((port == FM1_10GEC1 || port == FM1_10GEC2) - && (is_serdes_configured(XAUI_FM1))) + if ((port == FM1_10GEC1 || port == FM1_10GEC2) && + ((is_serdes_configured(XAUI_FM1_MAC9)) || + (is_serdes_configured(XAUI_FM1_MAC10)) || + (is_serdes_configured(XFI_FM1_MAC9)) || + (is_serdes_configured(XFI_FM1_MAC10)))) return PHY_INTERFACE_MODE_XGMII; - if ((port == FM2_10GEC1 || port == FM2_10GEC2) - && (is_serdes_configured(XAUI_FM2))) + if ((port == FM2_10GEC1 || port == FM2_10GEC2) && + ((is_serdes_configured(XAUI_FM2_MAC9)) || + (is_serdes_configured(XAUI_FM2_MAC10)) || + (is_serdes_configured(XFI_FM2_MAC9)) || + (is_serdes_configured(XFI_FM2_MAC10)))) return PHY_INTERFACE_MODE_XGMII; #define FSL_CORENET_RCWSR13_EC1 0x60000000 /* bits 417..418 */ diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c index 6c5cb9977..c283d823b 100644 --- a/drivers/net/phy/vitesse.c +++ b/drivers/net/phy/vitesse.c @@ -48,6 +48,19 @@ #define MIIM_VSC8601_SKEW_CTRL 0x1c #define PHY_EXT_PAGE_ACCESS 0x1f +#define PHY_EXT_PAGE_ACCESS_GENERAL 0x10 +#define PHY_EXT_PAGE_ACCESS_EXTENDED3 0x3 + +/* Vitesse VSC8574 control register */ +#define MIIM_VSC8574_MAC_SERDES_CON 0x10 +#define MIIM_VSC8574_MAC_SERDES_ANEG 0x80 +#define MIIM_VSC8574_GENERAL18 0x12 +#define MIIM_VSC8574_GENERAL19 0x13 + +/* Vitesse VSC8574 gerenal purpose register 18 */ +#define MIIM_VSC8574_18G_SGMII 0x80f0 +#define MIIM_VSC8574_18G_QSGMII 0x80e0 +#define MIIM_VSC8574_18G_CMDSTAT 0x8000 /* CIS8201 */ static int vitesse_config(struct phy_device *phydev) @@ -145,6 +158,49 @@ static int vsc8601_config(struct phy_device *phydev) return 0; } +static int vsc8574_config(struct phy_device *phydev) +{ + u32 val; + /* configure regiser 19G for MAC */ + phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, + PHY_EXT_PAGE_ACCESS_GENERAL); + + val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL19); + if (phydev->interface == PHY_INTERFACE_MODE_QSGMII) { + /* set bit 15:14 to '01' for QSGMII mode */ + val = (val & 0x3fff) | (1 << 14); + phy_write(phydev, MDIO_DEVAD_NONE, + MIIM_VSC8574_GENERAL19, val); + /* Enable 4 ports MAC QSGMII */ + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18, + MIIM_VSC8574_18G_QSGMII); + } else { + /* set bit 15:14 to '00' for SGMII mode */ + val = val & 0x3fff; + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL19, val); + /* Enable 4 ports MAC SGMII */ + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18, + MIIM_VSC8574_18G_SGMII); + } + val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18); + /* When bit 15 is cleared the command has completed */ + while (val & MIIM_VSC8574_18G_CMDSTAT) + val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_GENERAL18); + + /* Enable Serdes Auto-negotiation */ + phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, + PHY_EXT_PAGE_ACCESS_EXTENDED3); + val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_MAC_SERDES_CON); + val = val | MIIM_VSC8574_MAC_SERDES_ANEG; + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8574_MAC_SERDES_CON, val); + + phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0); + + genphy_config_aneg(phydev); + + return 0; +} + static struct phy_driver VSC8211_driver = { .name = "Vitesse VSC8211", .uid = 0xfc4b0, @@ -185,6 +241,16 @@ static struct phy_driver VSC8234_driver = { .shutdown = &genphy_shutdown, }; +static struct phy_driver VSC8574_driver = { + .name = "Vitesse VSC8574", + .uid = 0x704a0, + .mask = 0xffff0, + .features = PHY_GBIT_FEATURES, + .config = &vsc8574_config, + .startup = &vitesse_startup, + .shutdown = &genphy_shutdown, +}; + static struct phy_driver VSC8601_driver = { .name = "Vitesse VSC8601", .uid = 0x70420, @@ -244,6 +310,7 @@ int phy_vitesse_init(void) phy_register(&VSC8244_driver); phy_register(&VSC8211_driver); phy_register(&VSC8221_driver); + phy_register(&VSC8574_driver); phy_register(&VSC8662_driver); phy_register(&cis8201_driver); phy_register(&cis8204_driver); diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h index 76b3ca689..6dd5c0d53 100644 --- a/include/configs/T4240QDS.h +++ b/include/configs/T4240QDS.h @@ -25,7 +25,6 @@ */ #define CONFIG_T4240QDS #define CONFIG_PHYS_64BIT -#define CONFIG_PPC_T4240 #define CONFIG_FSL_SATA_V2 #define CONFIG_PCIE4 diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h index 2c665b8a9..b5462b7ad 100644 --- a/include/configs/t4qds.h +++ b/include/configs/t4qds.h @@ -444,11 +444,19 @@ unsigned long get_board_ddr_clk(void); #define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ #define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */ -/* VSC Crossbar switches */ -#define CONFIG_VSC_CROSSBAR #define I2C_MUX_CH_DEFAULT 0x8 +#define I2C_MUX_CH_VOL_MONITOR 0xa #define I2C_MUX_CH_VSC3316_FS 0xc #define I2C_MUX_CH_VSC3316_BS 0xd + +/* Voltage monitor on channel 2*/ +#define I2C_VOL_MONITOR_ADDR 0x40 +#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 +#define I2C_VOL_MONITOR_BUS_V_OVF 0x1 +#define I2C_VOL_MONITOR_BUS_V_SHIFT 3 + +/* VSC Crossbar switches */ +#define CONFIG_VSC_CROSSBAR #define VSC3316_FSM_TX_ADDR 0x70 #define VSC3316_FSM_RX_ADDR 0x71 @@ -504,7 +512,7 @@ unsigned long get_board_ddr_clk(void); */ #define CONFIG_FSL_ESPI #define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_SPANSION +#define CONFIG_SPI_FLASH_SST #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 @@ -641,15 +649,10 @@ unsigned long get_board_ddr_clk(void); #define SGMII_CARD_PORT2_PHY_ADDR 0x1D #define SGMII_CARD_PORT3_PHY_ADDR 0x1E #define SGMII_CARD_PORT4_PHY_ADDR 0x1F -#define XFI_CARD_PORT1_PHY_ADDR 0x1 /* tmp, FIXME below addr */ -#define XFI_CARD_PORT2_PHY_ADDR 0x2 -#define XFI_CARD_PORT3_PHY_ADDR 0x3 -#define XFI_CARD_PORT4_PHY_ADDR 0x4 -#define QSGMII_CARD_PHY_ADDR 0x5 -#define FM1_10GEC1_PHY_ADDR 0x6 -#define FM1_10GEC2_PHY_ADDR 0x7 -#define FM2_10GEC1_PHY_ADDR 0x8 -#define FM2_10GEC2_PHY_ADDR 0x9 +#define FM1_10GEC1_PHY_ADDR 0x0 +#define FM1_10GEC2_PHY_ADDR 0x1 +#define FM2_10GEC1_PHY_ADDR 0x2 +#define FM2_10GEC2_PHY_ADDR 0x3 #endif #ifdef CONFIG_PCI @@ -783,8 +786,21 @@ unsigned long get_board_ddr_clk(void); #define __USB_PHY_TYPE utmi +/* + * T4240 has 3 DDR controllers. Default to 3way_4KB interleaving. It can be + * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to + * cacheline interleaving. It can be cacheline, page, bank, superbank. + * See doc/README.fsl-ddr for details. + */ +#ifdef CONFIG_PPC_T4240 +#define CTRL_INTLV_PREFERED 3way_4KB +#else +#define CTRL_INTLV_PREFERED cacheline +#endif + #define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=fsl_ddr:ctlr_intlv=3way_4KB," \ + "hwconfig=fsl_ddr:" \ + "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ "bank_intlv=auto;" \ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ "netdev=eth0\0" \ diff --git a/include/fm_eth.h b/include/fm_eth.h index 495765b93..8fcf17210 100644 --- a/include/fm_eth.h +++ b/include/fm_eth.h @@ -88,7 +88,7 @@ enum fm_eth_type { #define FM_TGEC_INFO_INITIALIZER(idx, n) \ { \ - FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_TGEC_MDIO_ADDR) \ + FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM2_TGEC_MDIO_ADDR) \ .index = idx, \ .num = n - 1, \ .type = FM_ETH_10G_E, \ @@ -96,7 +96,7 @@ enum fm_eth_type { .rx_port_id = RX_PORT_10G_BASE + n - 1, \ .tx_port_id = TX_PORT_10G_BASE + n - 1, \ .compat_offset = CONFIG_SYS_FSL_FM##idx##_OFFSET + \ - offsetof(struct ccsr_fman, memac[n-1]),\ + offsetof(struct ccsr_fman, memac[n-1+8]),\ } #else #define FM_DTSEC_INFO_INITIALIZER(idx, n) \ diff --git a/include/phy.h b/include/phy.h index 58ca2730c..44d5eaf54 100644 --- a/include/phy.h +++ b/include/phy.h @@ -52,6 +52,7 @@ typedef enum { PHY_INTERFACE_MODE_MII, PHY_INTERFACE_MODE_GMII, PHY_INTERFACE_MODE_SGMII, + PHY_INTERFACE_MODE_QSGMII, PHY_INTERFACE_MODE_TBI, PHY_INTERFACE_MODE_RMII, PHY_INTERFACE_MODE_RGMII, @@ -67,6 +68,7 @@ static const char *phy_interface_strings[] = { [PHY_INTERFACE_MODE_MII] = "mii", [PHY_INTERFACE_MODE_GMII] = "gmii", [PHY_INTERFACE_MODE_SGMII] = "sgmii", + [PHY_INTERFACE_MODE_QSGMII] = "qsgmii", [PHY_INTERFACE_MODE_TBI] = "tbi", [PHY_INTERFACE_MODE_RMII] = "rmii", [PHY_INTERFACE_MODE_RGMII] = "rgmii", |