summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--CHANGELOG2
-rw-r--r--board/Marvell/db64360/mv_eth.c2
-rw-r--r--board/Marvell/db64460/mv_eth.c4
-rw-r--r--board/esd/cpci2dp/cpci2dp.c44
-rw-r--r--board/esd/cpci750/mv_eth.c2
-rw-r--r--board/evb64260/eth_addrtbl.c2
-rw-r--r--board/incaip/flash.c2
-rw-r--r--board/incaip/incaip.c2
-rw-r--r--board/incaip/lowlevel_init.S9
-rw-r--r--board/mpc8260ads/mpc8260ads.c2
-rw-r--r--board/prodrive/p3p440/p3p440.c2
-rw-r--r--board/tqm834x/config.mk1
-rw-r--r--board/tqm834x/pci.c36
-rw-r--r--board/tqm834x/tqm834x.c16
-rw-r--r--cpu/mcf52x2/fec.c1
-rw-r--r--cpu/mips/incaip_clock.c2
-rw-r--r--cpu/mpc83xx/speed.c4
-rw-r--r--cpu/mpc8xx/config.mk2
-rw-r--r--cpu/ppc4xx/spd_sdram.c354
-rw-r--r--doc/README.OFT2
-rw-r--r--include/configs/TQM834x.h6
-rw-r--r--include/configs/o2dnt.h2
-rw-r--r--lib_mips/board.c2
-rw-r--r--lib_mips/mips_linux.c4
-rw-r--r--lib_ppc/board.c4
25 files changed, 251 insertions, 258 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 3f31d86e1..3762f2116 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -36,7 +36,7 @@ Changes for U-Boot 1.1.4:
* Increase malloc arena on TQM5200 board to 256 kB.
With 64 kb uniform flash sector size the old value of 128 kB was
too small.
-
+
* Fix miiphy global data initialization (problem on 4xx boards when
no ethaddr is assigned). Initialization moved from
miiphy_register() to eth_initialize().
diff --git a/board/Marvell/db64360/mv_eth.c b/board/Marvell/db64360/mv_eth.c
index 2dd47bf50..3c5dee73b 100644
--- a/board/Marvell/db64360/mv_eth.c
+++ b/board/Marvell/db64360/mv_eth.c
@@ -283,7 +283,7 @@ void mv6436x_eth_initialize (bd_t * bis)
/* set pointer to memory for stats data structure etc... */
port_private = calloc (sizeof (*ethernet_private), 1);
- ethernet_private->port_private = (void *)port_private;
+ ethernet_private->port_private = (void *)port_private;
if (!port_private) {
printf ("%s: %s allocation failure, %s\n",
__FUNCTION__, dev->name,
diff --git a/board/Marvell/db64460/mv_eth.c b/board/Marvell/db64460/mv_eth.c
index a50f174fa..ec5d58106 100644
--- a/board/Marvell/db64460/mv_eth.c
+++ b/board/Marvell/db64460/mv_eth.c
@@ -268,7 +268,7 @@ void mv6446x_eth_initialize (bd_t * bis)
dev->recv = (void *) db64460_eth_poll;
ethernet_private = calloc (sizeof (*ethernet_private), 1);
- dev->priv = (void *)ethernet_private;
+ dev->priv = (void *)ethernet_private;
if (!ethernet_private) {
printf ("%s: %s allocation failure, %s\n",
__FUNCTION__, dev->name,
@@ -282,7 +282,7 @@ void mv6446x_eth_initialize (bd_t * bis)
/* set pointer to memory for stats data structure etc... */
port_private = calloc (sizeof (*ethernet_private), 1);
- ethernet_private->port_private = (void *)port_private;
+ ethernet_private->port_private = (void *)port_private;
if (!port_private) {
printf ("%s: %s allocation failure, %s\n",
__FUNCTION__, dev->name,
diff --git a/board/esd/cpci2dp/cpci2dp.c b/board/esd/cpci2dp/cpci2dp.c
index b463f0e38..df10c0e6a 100644
--- a/board/esd/cpci2dp/cpci2dp.c
+++ b/board/esd/cpci2dp/cpci2dp.c
@@ -12,7 +12,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -36,11 +36,11 @@ int board_early_init_f (void)
cntrl0Reg = mfdcr(cntrl0);
mtdcr(cntrl0, cntrl0Reg | 0x00900000);
- /* set output pins to high */
- out32(GPIO0_OR, CFG_INTA_FAKE | CFG_EEPROM_WP | CFG_PB_LED);
- /* INTA# is open drain */
+ /* set output pins to high */
+ out32(GPIO0_OR, CFG_INTA_FAKE | CFG_EEPROM_WP | CFG_PB_LED);
+ /* INTA# is open drain */
out32(GPIO0_ODR, CFG_INTA_FAKE);
- /* setup for output */
+ /* setup for output */
out32(GPIO0_TCR, CFG_INTA_FAKE | CFG_EEPROM_WP);
/*
@@ -55,14 +55,14 @@ int board_early_init_f (void)
* IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive
* IRQ 31 (EXT IRQ 6) unused
*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
- mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(uicer, 0x00000000); /* disable all ints */
+ mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
+ mtdcr(uicpr, 0xFFFFFF81); /* set int polarities */
- mtdcr(uictr, 0x10000000); /* set int trigger levels */
- mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(uictr, 0x10000000); /* set int trigger levels */
+ mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
return 0;
}
@@ -142,18 +142,17 @@ int testdram (void)
#if defined(CFG_EEPROM_WREN)
/* Input: <dev_addr> I2C address of EEPROM device to enable.
- * <state> -1: deliver current state
- * 0: disable write
+ * <state> -1: deliver current state
+ * 0: disable write
* 1: enable write
- * Returns: -1: wrong device address
- * 0: dis-/en- able done
+ * Returns: -1: wrong device address
+ * 0: dis-/en- able done
* 0/1: current state if <state> was -1.
*/
int eeprom_write_enable (unsigned dev_addr, int state) {
if (CFG_I2C_EEPROM_ADDR != dev_addr) {
return -1;
- }
- else {
+ } else {
switch (state) {
case 1:
/* Enable write access, clear bit GPIO_SINT2. */
@@ -186,19 +185,16 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, -1);
if (state < 0) {
puts ("Query of write access state failed.\n");
- }
- else {
+ } else {
printf ("Write access for device 0x%0x is %sabled.\n",
CFG_I2C_EEPROM_ADDR, state ? "en" : "dis");
state = 0;
}
- }
- else {
+ } else {
if ('0' == argv[1][0]) {
/* Disable write access. */
state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 0);
- }
- else {
+ } else {
/* Enable write access. */
state = eeprom_write_enable (CFG_I2C_EEPROM_ADDR, 1);
}
diff --git a/board/esd/cpci750/mv_eth.c b/board/esd/cpci750/mv_eth.c
index 880528f84..be176dcc8 100644
--- a/board/esd/cpci750/mv_eth.c
+++ b/board/esd/cpci750/mv_eth.c
@@ -284,7 +284,7 @@ void mv6436x_eth_initialize (bd_t * bis)
/* set pointer to memory for stats data structure etc... */
port_private =
calloc (sizeof (*ethernet_private), 1);
- ethernet_private->port_private = (void *)port_private;
+ ethernet_private->port_private = (void *)port_private;
if (!port_private) {
printf ("%s: %s allocation failure, %s\n",
__FUNCTION__, dev->name,
diff --git a/board/evb64260/eth_addrtbl.c b/board/evb64260/eth_addrtbl.c
index 69882f530..e8ef0e3e5 100644
--- a/board/evb64260/eth_addrtbl.c
+++ b/board/evb64260/eth_addrtbl.c
@@ -57,7 +57,7 @@ unsigned int initAddressTable (u32 port, u32 hashMode, u32 hashSizeSelector)
realAddrTableBase[port] =
malloc (bytes + 64);
- tableBase = (unsigned int)realAddrTableBase;
+ tableBase = (unsigned int)realAddrTableBase;
if (!tableBase) {
printf ("%s: alloc memory failed \n", __FUNCTION__);
diff --git a/board/incaip/flash.c b/board/incaip/flash.c
index 686f2e96f..520514dea 100644
--- a/board/incaip/flash.c
+++ b/board/incaip/flash.c
@@ -190,7 +190,7 @@ void flash_print_info (flash_info_t *info)
int i;
uchar *boottype;
uchar *bootletter;
- uchar *fmt;
+ char *fmt;
uchar botbootletter[] = "B";
uchar topbootletter[] = "T";
uchar botboottype[] = "bottom boot sector";
diff --git a/board/incaip/incaip.c b/board/incaip/incaip.c
index eb6eaea27..b5d9e0049 100644
--- a/board/incaip/incaip.c
+++ b/board/incaip/incaip.c
@@ -68,7 +68,7 @@ long int initdram(int board_type)
{
*INCA_IP_SDRAM_MC_CFGPB0 = (0x14 << 8) |
(rows << 4) | cols;
- size = get_ram_size((ulong *)CFG_SDRAM_BASE,
+ size = get_ram_size((long *)CFG_SDRAM_BASE,
max_sdram_size());
if (size > max_size)
diff --git a/board/incaip/lowlevel_init.S b/board/incaip/lowlevel_init.S
index fb64ef419..14d738aa1 100644
--- a/board/incaip/lowlevel_init.S
+++ b/board/incaip/lowlevel_init.S
@@ -66,6 +66,7 @@
.globl ebu_init
.ent ebu_init
ebu_init:
+__ebu_init:
li t1, EBU_MODUL_BASE
li t2, 0xA0000041
@@ -118,6 +119,7 @@ ebu_init:
.globl cgu_init
.ent cgu_init
cgu_init:
+__cgu_init:
li t1, CGU_MODUL_BASE
@@ -182,6 +184,7 @@ cgu_init:
.globl sdram_init
.ent sdram_init
sdram_init:
+__sdram_init:
li t1, MC_MODUL_BASE
@@ -281,11 +284,11 @@ lowlevel_init:
/* We rely on the fact that neither ebu_init() nor cgu_init() nor sdram_init()
* modify t0 and a0.
*/
- bal cgu_init
+ bal __cgu_init
nop
- bal ebu_init
+ bal __ebu_init
nop
- bal sdram_init
+ bal __sdram_init
nop
move ra, t0
diff --git a/board/mpc8260ads/mpc8260ads.c b/board/mpc8260ads/mpc8260ads.c
index 374e97961..93550e2ad 100644
--- a/board/mpc8260ads/mpc8260ads.c
+++ b/board/mpc8260ads/mpc8260ads.c
@@ -251,7 +251,7 @@ void reset_phy (void)
/* Advertise all capabilities */
bb_miiphy_write(NULL, CFG_PHY_ADDR, PHY_ANAR, 0x01E1);
-
+
/* Do not bypass Rx/Tx (de)scrambler */
bb_miiphy_write(NULL, CFG_PHY_ADDR, PHY_DCR, 0x0000);
diff --git a/board/prodrive/p3p440/p3p440.c b/board/prodrive/p3p440/p3p440.c
index 8ba66bf5e..d42a643c2 100644
--- a/board/prodrive/p3p440/p3p440.c
+++ b/board/prodrive/p3p440/p3p440.c
@@ -72,7 +72,7 @@ static void wait_for_pci_ready(void)
for (;;) {
if (in32(GPIO0_IR) & CFG_EREADY_IO)
return;
- }
+ }
}
diff --git a/board/tqm834x/config.mk b/board/tqm834x/config.mk
index 9295e7765..f172c4ede 100644
--- a/board/tqm834x/config.mk
+++ b/board/tqm834x/config.mk
@@ -21,4 +21,3 @@
#
TEXT_BASE = 0x80000000
-
diff --git a/board/tqm834x/pci.c b/board/tqm834x/pci.c
index 590987cc8..5a23e6c55 100644
--- a/board/tqm834x/pci.c
+++ b/board/tqm834x/pci.c
@@ -86,29 +86,29 @@ pci_init_board(void)
pci_conf = immr->pci_conf;
hose = &pci1_hose;
-
+
/*
- * Configure PCI controller and PCI_CLK_OUTPUT
+ * Configure PCI controller and PCI_CLK_OUTPUT
*/
/*
* WARNING! only PCI_CLK_OUTPUT1 is enabled here as this is the one
* line actually used for clocking all external PCI devices in TQM83xx.
- * Enabling other PCI_CLK_OUTPUT lines may lead to board's hang for
+ * Enabling other PCI_CLK_OUTPUT lines may lead to board's hang for
* unknown reasons - particularly PCI_CLK_OUTPUT6 and PCI_CLK_OUTPUT7
- * are known to hang the board; this issue is under investigation
+ * are known to hang the board; this issue is under investigation
* (13 oct 05)
*/
reg32 = OCCR_PCICOE1;
-#if 0
+#if 0
/* enabling all PCI_CLK_OUTPUT lines HANGS the board... */
reg32 = 0xff000000;
-#endif
+#endif
if (clk->spmr & SPMR_CKID) {
/* PCI Clock is half CONFIG_83XX_CLKIN so need to set up OCCR
* fields accordingly */
reg32 |= (OCCR_PCI1CR | OCCR_PCI2CR);
-
+
reg32 |= (OCCR_PCICD0 | OCCR_PCICD1 | OCCR_PCICD2 \
| OCCR_PCICD3 | OCCR_PCICD4 | OCCR_PCICD5 \
| OCCR_PCICD6 | OCCR_PCICD7);
@@ -138,7 +138,7 @@ pci_init_board(void)
* Configure PCI Outbound Translation Windows
*/
- /* PCI1 mem space */
+ /* PCI1 mem space */
pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK;
pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK;
pci_pot[0].pocmr = POCMR_EN | (POCMR_CM_512M & POCMR_CM_MASK);
@@ -152,8 +152,8 @@ pci_init_board(void)
* Configure PCI Inbound Translation Windows
*/
- /* we need RAM mapped to PCI space for the devices to
- * access main memory */
+ /* we need RAM mapped to PCI space for the devices to
+ * access main memory */
pci_ctrl[0].pitar1 = 0x0;
pci_ctrl[0].pibar1 = 0x0;
pci_ctrl[0].piebar1 = 0x0;
@@ -179,10 +179,10 @@ pci_init_board(void)
/* System memory space */
pci_set_region(hose->regions + 2,
CONFIG_PCI_SYS_MEM_BUS,
- CONFIG_PCI_SYS_MEM_PHYS,
- CONFIG_PCI_SYS_MEM_SIZE,
- PCI_REGION_MEM | PCI_REGION_MEMORY);
-
+ CONFIG_PCI_SYS_MEM_PHYS,
+ CONFIG_PCI_SYS_MEM_SIZE,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
hose->region_count = 3;
pci_setup_indirect(hose,
@@ -195,18 +195,18 @@ pci_init_board(void)
* Write to Command register
*/
reg16 = 0xff;
- pci_hose_read_config_word (hose, PCI_BDF(0,0,0), PCI_COMMAND,
+ pci_hose_read_config_word (hose, PCI_BDF(0,0,0), PCI_COMMAND,
&reg16);
reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_hose_write_config_word(hose, PCI_BDF(0,0,0), PCI_COMMAND,
+ pci_hose_write_config_word(hose, PCI_BDF(0,0,0), PCI_COMMAND,
reg16);
/*
* Clear non-reserved bits in status register.
*/
- pci_hose_write_config_word(hose, PCI_BDF(0,0,0), PCI_STATUS,
+ pci_hose_write_config_word(hose, PCI_BDF(0,0,0), PCI_STATUS,
0xffff);
- pci_hose_write_config_byte(hose, PCI_BDF(0,0,0), PCI_LATENCY_TIMER,
+ pci_hose_write_config_byte(hose, PCI_BDF(0,0,0), PCI_LATENCY_TIMER,
0x80);
#ifdef CONFIG_PCI_SCAN_SHOW
diff --git a/board/tqm834x/tqm834x.c b/board/tqm834x/tqm834x.c
index f681dc8b7..dada6739b 100644
--- a/board/tqm834x/tqm834x.c
+++ b/board/tqm834x/tqm834x.c
@@ -77,7 +77,7 @@ int board_early_init_r (void) {
/* sanity check, IMMARBAR should be mirrored at offset zero of IMMR */
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
return 0;
-
+
/* detect the number of Flash banks */
return detect_num_flash_banks();
}
@@ -108,7 +108,7 @@ long int initdram (int board_type)
set_ddr_config();
udelay(200);
-
+
/* enable DDR controller */
im->ddr.sdram_cfg = (SDRAM_CFG_MEM_EN |
SDRAM_CFG_SREN |
@@ -154,7 +154,7 @@ int checkboard (void)
/* get bus width */
w = 32;
- if (immr->reset.rcwh & RCWH_PCI64)
+ if (immr->reset.rcwh & RCWH_PCI64)
w = 64;
/* get clock */
@@ -192,7 +192,7 @@ static int detect_num_flash_banks(void)
ulong total_size;
tqm834x_num_flash_banks = 2; /* assume two banks */
-
+
/* Get bank 1 and 2 information */
bank1_size = flash_get_size(CFG_FLASH_BASE, 0);
debug("Bank1 size: %lu\n", bank1_size);
@@ -318,10 +318,10 @@ static long int get_ddr_bank_size(short cs, volatile long *base)
set_cs_config(cs, 0);
return 0;
}
-
+
debug("\nDetected configuration %ld x %ld (%ld MiB) at addr %p\n",
conf[detected].row, conf[detected].col, conf[detected].size >> 20, base);
-
+
/* configure cs ro detected params */
set_cs_config(cs, CSCONFIG_EN | conf[detected].row |
conf[detected].col);
@@ -367,7 +367,7 @@ static void set_ddr_config(void) {
im->ddr.sdram_clk_cntl = DDR_SDRAM_CLK_CNTL_SS_EN |
DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05;
SYNC;
-
+
/* timing configuration */
im->ddr.timing_cfg_1 =
(4 << TIMING_CFG1_PRETOACT_SHIFT) |
@@ -389,7 +389,7 @@ static void set_ddr_config(void) {
SDRAM_CFG_SREN |
SDRAM_CFG_SDRAM_TYPE_DDR;
SYNC;
-
+
/* Set SDRAM mode */
im->ddr.sdram_mode =
((DDR_MODE_EXT_MODEREG | DDR_MODE_WEAK) <<
diff --git a/cpu/mcf52x2/fec.c b/cpu/mcf52x2/fec.c
index 3bf3c8d54..a5c50af63 100644
--- a/cpu/mcf52x2/fec.c
+++ b/cpu/mcf52x2/fec.c
@@ -567,4 +567,3 @@ int mcf52x2_miiphy_initialize(bd_t *bis)
#endif
return 0;
}
-
diff --git a/cpu/mips/incaip_clock.c b/cpu/mips/incaip_clock.c
index 65ee8472d..d0515ca67 100644
--- a/cpu/mips/incaip_clock.c
+++ b/cpu/mips/incaip_clock.c
@@ -102,7 +102,7 @@ int incaip_set_cpuclk (void)
extern void ebu_init(long);
extern void cgu_init(long);
extern void sdram_init(long);
- uchar tmp[64];
+ char tmp[64];
ulong cpuclk;
if (getenv_r ("cpuclk", tmp, sizeof (tmp)) > 0) {
diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c
index 5964260e3..1368fc3fe 100644
--- a/cpu/mpc83xx/speed.c
+++ b/cpu/mpc83xx/speed.c
@@ -132,7 +132,7 @@ int get_clocks (void)
/* PCI Host Mode */
if (!(im->reset.rcwh & RCWH_PCIHOST)) {
- /* though RCWH_PCIHOST is defined in CFG_HRCW_HIGH
+ /* though RCWH_PCIHOST is defined in CFG_HRCW_HIGH
* the im->reset.rcwhr PCI Host Mode is disabled
* FIXME: findout if there is a way to issue some warning */
return -2;
@@ -156,7 +156,7 @@ int get_clocks (void)
/* PCI Agent Mode */
if (im->reset.rcwh & RCWH_PCIHOST) {
- /* though RCWH_PCIHOST is not defined in CFG_HRCW_HIGH
+ /* though RCWH_PCIHOST is not defined in CFG_HRCW_HIGH
* the im->reset.rcwhr PCI Host Mode is enabled */
return -3;
}
diff --git a/cpu/mpc8xx/config.mk b/cpu/mpc8xx/config.mk
index 5fa150e91..bfa6625fa 100644
--- a/cpu/mpc8xx/config.mk
+++ b/cpu/mpc8xx/config.mk
@@ -21,6 +21,6 @@
# MA 02111-1307 USA
#
-PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -fno-strict-aliasing
+PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -fno-strict-aliasing
PLATFORM_CPPFLAGS += -DCONFIG_8xx -ffixed-r2 -ffixed-r29 -mstring -mcpu=860 -msoft-float
diff --git a/cpu/ppc4xx/spd_sdram.c b/cpu/ppc4xx/spd_sdram.c
index 1bdfc1610..ebd5f3998 100644
--- a/cpu/ppc4xx/spd_sdram.c
+++ b/cpu/ppc4xx/spd_sdram.c
@@ -48,49 +48,49 @@
/*
* Set default values
*/
-#ifndef CFG_I2C_SPEED
-#define CFG_I2C_SPEED 50000
+#ifndef CFG_I2C_SPEED
+#define CFG_I2C_SPEED 50000
#endif
-#ifndef CFG_I2C_SLAVE
-#define CFG_I2C_SLAVE 0xFE
+#ifndef CFG_I2C_SLAVE
+#define CFG_I2C_SLAVE 0xFE
#endif
-#define ONE_BILLION 1000000000
+#define ONE_BILLION 1000000000
-#ifndef CONFIG_440 /* for 405 WALNUT/SYCAMORE/BUBINGA boards */
+#ifndef CONFIG_440 /* for 405 WALNUT/SYCAMORE/BUBINGA boards */
-#define SDRAM0_CFG_DCE 0x80000000
-#define SDRAM0_CFG_SRE 0x40000000
-#define SDRAM0_CFG_PME 0x20000000
-#define SDRAM0_CFG_MEMCHK 0x10000000
-#define SDRAM0_CFG_REGEN 0x08000000
-#define SDRAM0_CFG_ECCDD 0x00400000
-#define SDRAM0_CFG_EMDULR 0x00200000
-#define SDRAM0_CFG_DRW_SHIFT (31-6)
-#define SDRAM0_CFG_BRPF_SHIFT (31-8)
+#define SDRAM0_CFG_DCE 0x80000000
+#define SDRAM0_CFG_SRE 0x40000000
+#define SDRAM0_CFG_PME 0x20000000
+#define SDRAM0_CFG_MEMCHK 0x10000000
+#define SDRAM0_CFG_REGEN 0x08000000
+#define SDRAM0_CFG_ECCDD 0x00400000
+#define SDRAM0_CFG_EMDULR 0x00200000
+#define SDRAM0_CFG_DRW_SHIFT (31-6)
+#define SDRAM0_CFG_BRPF_SHIFT (31-8)
-#define SDRAM0_TR_CASL_SHIFT (31-8)
-#define SDRAM0_TR_PTA_SHIFT (31-13)
-#define SDRAM0_TR_CTP_SHIFT (31-15)
-#define SDRAM0_TR_LDF_SHIFT (31-17)
-#define SDRAM0_TR_RFTA_SHIFT (31-29)
-#define SDRAM0_TR_RCD_SHIFT (31-31)
+#define SDRAM0_TR_CASL_SHIFT (31-8)
+#define SDRAM0_TR_PTA_SHIFT (31-13)
+#define SDRAM0_TR_CTP_SHIFT (31-15)
+#define SDRAM0_TR_LDF_SHIFT (31-17)
+#define SDRAM0_TR_RFTA_SHIFT (31-29)
+#define SDRAM0_TR_RCD_SHIFT (31-31)
-#define SDRAM0_RTR_SHIFT (31-15)
-#define SDRAM0_ECCCFG_SHIFT (31-11)
+#define SDRAM0_RTR_SHIFT (31-15)
+#define SDRAM0_ECCCFG_SHIFT (31-11)
/* SDRAM0_CFG enable macro */
#define SDRAM0_CFG_BRPF(x) ( ( x & 0x3)<< SDRAM0_CFG_BRPF_SHIFT )
-#define SDRAM0_BXCR_SZ_MASK 0x000e0000
-#define SDRAM0_BXCR_AM_MASK 0x0000e000
+#define SDRAM0_BXCR_SZ_MASK 0x000e0000
+#define SDRAM0_BXCR_AM_MASK 0x0000e000
-#define SDRAM0_BXCR_SZ_SHIFT (31-14)
-#define SDRAM0_BXCR_AM_SHIFT (31-18)
+#define SDRAM0_BXCR_SZ_SHIFT (31-14)
+#define SDRAM0_BXCR_AM_SHIFT (31-18)
-#define SDRAM0_BXCR_SZ(x) ( (( x << SDRAM0_BXCR_SZ_SHIFT) & SDRAM0_BXCR_SZ_MASK) )
-#define SDRAM0_BXCR_AM(x) ( (( x << SDRAM0_BXCR_AM_SHIFT) & SDRAM0_BXCR_AM_MASK) )
+#define SDRAM0_BXCR_SZ(x) ( (( x << SDRAM0_BXCR_SZ_SHIFT) & SDRAM0_BXCR_SZ_MASK) )
+#define SDRAM0_BXCR_AM(x) ( (( x << SDRAM0_BXCR_AM_SHIFT) & SDRAM0_BXCR_AM_MASK) )
#ifdef CONFIG_SPDDRAM_SILENT
# define SPD_ERR(x) do { return 0; } while (0)
@@ -175,7 +175,7 @@ long int spd_sdram(int(read_spd)(uint addr))
* data from DIMM:
* 27 IN Row Precharge Time ( t RP)
* 29 MIN RAS to CAS Delay ( t RCD)
- * 127 Component and Clock Detail ,clk0-clk3, junction temp, CAS
+ * 127 Component and Clock Detail ,clk0-clk3, junction temp, CAS
* -------------------------------------------------------------------*/
/*
@@ -184,18 +184,18 @@ long int spd_sdram(int(read_spd)(uint addr))
*/
tmp = read_spd(127) & 0x6;
- if (tmp == 0x02){ /* only cas = 2 supported */
+ if (tmp == 0x02) { /* only cas = 2 supported */
min_cas = 2;
-/* t_ck = read_spd(9); */
-/* t_ac = read_spd(10); */
- } else if (tmp == 0x04) { /* only cas = 3 supported */
+/* t_ck = read_spd(9); */
+/* t_ac = read_spd(10); */
+ } else if (tmp == 0x04) { /* only cas = 3 supported */
min_cas = 3;
-/* t_ck = read_spd(9); */
-/* t_ac = read_spd(10); */
- } else if (tmp == 0x06) { /* 2,3 supported, so use 2 */
+/* t_ck = read_spd(9); */
+/* t_ac = read_spd(10); */
+ } else if (tmp == 0x06) { /* 2,3 supported, so use 2 */
min_cas = 2;
-/* t_ck = read_spd(23); */
-/* t_ac = read_spd(24); */
+/* t_ck = read_spd(23); */
+/* t_ac = read_spd(24); */
} else {
SPD_ERR("SDRAM - unsupported CAS latency \n");
}
@@ -263,7 +263,7 @@ long int spd_sdram(int(read_spd)(uint addr))
}
/* convert from nsec to bus cycles */
tmp = (tmp * 10) / bus_period_x_10;
- sdram0_rtr = (tmp & 0x3ff8) << SDRAM0_RTR_SHIFT;
+ sdram0_rtr = (tmp & 0x3ff8) << SDRAM0_RTR_SHIFT;
/*------------------------------------------------------------------
* determine the number of banks used
@@ -292,7 +292,7 @@ long int spd_sdram(int(read_spd)(uint addr))
else if (tmp==4)
bank_cnt *= 4;
else
- bank_cnt = 8; /* 8 is an error code */
+ bank_cnt = 8; /* 8 is an error code */
if (bank_cnt > 4) /* we only have 4 banks to work with */
SPD_ERR("SDRAM - unsupported module rows for this width\n");
@@ -323,7 +323,7 @@ long int spd_sdram(int(read_spd)(uint addr))
total_size *= read_spd(5); /* mult by module rows (dimm sides) */
/*------------------------------------------------------------------
- * map rows * cols * banks to a mode
+ * map rows * cols * banks to a mode
* -------------------------------------------------------------------*/
switch (row) {
@@ -388,9 +388,9 @@ long int spd_sdram(int(read_spd)(uint addr))
bank_size = total_size / bank_cnt;
/* convert bank size to bank size code for ppc4xx
by takeing log2(bank_size) - 22 */
- tmp = bank_size; /* start with tmp = bank_size */
+ tmp = bank_size; /* start with tmp = bank_size */
bank_code = 0; /* and bank_code = 0 */
- while (tmp > 1) { /* this takes log2 of tmp */
+ while (tmp > 1) { /* this takes log2 of tmp */
bank_code++; /* and stores result in bank_code */
tmp = tmp >> 1;
} /* bank_code is now log2(bank_size) */
@@ -444,7 +444,7 @@ long int spd_sdram(int(read_spd)(uint addr))
#endif
mtsdram0( mem_sdtr1 , sdram0_tr );
- /* SDRAM have a power on delay, 500 micro should do */
+ /* SDRAM have a power on delay, 500 micro should do */
udelay(500);
sdram0_cfg = SDRAM0_CFG_DCE | SDRAM0_CFG_BRPF(1) | SDRAM0_CFG_ECCDD | SDRAM0_CFG_EMDULR;
if (ecc_on)
@@ -464,172 +464,172 @@ int spd_read(uint addr)
return 0;
}
-#else /* CONFIG_440 */
+#else /* CONFIG_440 */
/*-----------------------------------------------------------------------------
| Memory Controller Options 0
+-----------------------------------------------------------------------------*/
-#define SDRAM_CFG0_DCEN 0x80000000 /* SDRAM Controller Enable */
-#define SDRAM_CFG0_MCHK_MASK 0x30000000 /* Memory data errchecking mask */
-#define SDRAM_CFG0_MCHK_NON 0x00000000 /* No ECC generation */
-#define SDRAM_CFG0_MCHK_GEN 0x20000000 /* ECC generation */
-#define SDRAM_CFG0_MCHK_CHK 0x30000000 /* ECC generation and checking */
-#define SDRAM_CFG0_RDEN 0x08000000 /* Registered DIMM enable */
-#define SDRAM_CFG0_PMUD 0x04000000 /* Page management unit */
-#define SDRAM_CFG0_DMWD_MASK 0x02000000 /* DRAM width mask */
-#define SDRAM_CFG0_DMWD_32 0x00000000 /* 32 bits */
-#define SDRAM_CFG0_DMWD_64 0x02000000 /* 64 bits */
-#define SDRAM_CFG0_UIOS_MASK 0x00C00000 /* Unused IO State */
-#define SDRAM_CFG0_PDP 0x00200000 /* Page deallocation policy */
+#define SDRAM_CFG0_DCEN 0x80000000 /* SDRAM Controller Enable */
+#define SDRAM_CFG0_MCHK_MASK 0x30000000 /* Memory data errchecking mask */
+#define SDRAM_CFG0_MCHK_NON 0x00000000 /* No ECC generation */
+#define SDRAM_CFG0_MCHK_GEN 0x20000000 /* ECC generation */
+#define SDRAM_CFG0_MCHK_CHK 0x30000000 /* ECC generation and checking */
+#define SDRAM_CFG0_RDEN 0x08000000 /* Registered DIMM enable */
+#define SDRAM_CFG0_PMUD 0x04000000 /* Page management unit */
+#define SDRAM_CFG0_DMWD_MASK 0x02000000 /* DRAM width mask */
+#define SDRAM_CFG0_DMWD_32 0x00000000 /* 32 bits */
+#define SDRAM_CFG0_DMWD_64 0x02000000 /* 64 bits */
+#define SDRAM_CFG0_UIOS_MASK 0x00C00000 /* Unused IO State */
+#define SDRAM_CFG0_PDP 0x00200000 /* Page deallocation policy */
/*-----------------------------------------------------------------------------
| Memory Controller Options 1
+-----------------------------------------------------------------------------*/
-#define SDRAM_CFG1_SRE 0x80000000 /* Self-Refresh Entry */
-#define SDRAM_CFG1_PMEN 0x40000000 /* Power Management Enable */
+#define SDRAM_CFG1_SRE 0x80000000 /* Self-Refresh Entry */
+#define SDRAM_CFG1_PMEN 0x40000000 /* Power Management Enable */
/*-----------------------------------------------------------------------------+
| SDRAM DEVPOT Options
+-----------------------------------------------------------------------------*/
-#define SDRAM_DEVOPT_DLL 0x80000000
-#define SDRAM_DEVOPT_DS 0x40000000
+#define SDRAM_DEVOPT_DLL 0x80000000
+#define SDRAM_DEVOPT_DS 0x40000000
/*-----------------------------------------------------------------------------+
| SDRAM MCSTS Options
+-----------------------------------------------------------------------------*/
-#define SDRAM_MCSTS_MRSC 0x80000000
-#define SDRAM_MCSTS_SRMS 0x40000000
-#define SDRAM_MCSTS_CIS 0x20000000
+#define SDRAM_MCSTS_MRSC 0x80000000
+#define SDRAM_MCSTS_SRMS 0x40000000
+#define SDRAM_MCSTS_CIS 0x20000000
/*-----------------------------------------------------------------------------
| SDRAM Refresh Timer Register
+-----------------------------------------------------------------------------*/
-#define SDRAM_RTR_RINT_MASK 0xFFFF0000
+#define SDRAM_RTR_RINT_MASK 0xFFFF0000
#define SDRAM_RTR_RINT_ENCODE(n) (((n) << 16) & SDRAM_RTR_RINT_MASK)
-#define sdram_HZ_to_ns(hertz) (1000000000/(hertz))
+#define sdram_HZ_to_ns(hertz) (1000000000/(hertz))
/*-----------------------------------------------------------------------------+
| SDRAM UABus Base Address Reg
+-----------------------------------------------------------------------------*/
-#define SDRAM_UABBA_UBBA_MASK 0x0000000F
+#define SDRAM_UABBA_UBBA_MASK 0x0000000F
/*-----------------------------------------------------------------------------+
| Memory Bank 0-7 configuration
+-----------------------------------------------------------------------------*/
-#define SDRAM_BXCR_SDBA_MASK 0xff800000 /* Base address */
-#define SDRAM_BXCR_SDSZ_MASK 0x000e0000 /* Size */
-#define SDRAM_BXCR_SDSZ_8 0x00020000 /* 8M */
-#define SDRAM_BXCR_SDSZ_16 0x00040000 /* 16M */
-#define SDRAM_BXCR_SDSZ_32 0x00060000 /* 32M */
-#define SDRAM_BXCR_SDSZ_64 0x00080000 /* 64M */
-#define SDRAM_BXCR_SDSZ_128 0x000a0000 /* 128M */
-#define SDRAM_BXCR_SDSZ_256 0x000c0000 /* 256M */
-#define SDRAM_BXCR_SDSZ_512 0x000e0000 /* 512M */
-#define SDRAM_BXCR_SDAM_MASK 0x0000e000 /* Addressing mode */
-#define SDRAM_BXCR_SDAM_1 0x00000000 /* Mode 1 */
-#define SDRAM_BXCR_SDAM_2 0x00002000 /* Mode 2 */
-#define SDRAM_BXCR_SDAM_3 0x00004000 /* Mode 3 */
-#define SDRAM_BXCR_SDAM_4 0x00006000 /* Mode 4 */
-#define SDRAM_BXCR_SDBE 0x00000001 /* Memory Bank Enable */
+#define SDRAM_BXCR_SDBA_MASK 0xff800000 /* Base address */
+#define SDRAM_BXCR_SDSZ_MASK 0x000e0000 /* Size */
+#define SDRAM_BXCR_SDSZ_8 0x00020000 /* 8M */
+#define SDRAM_BXCR_SDSZ_16 0x00040000 /* 16M */
+#define SDRAM_BXCR_SDSZ_32 0x00060000 /* 32M */
+#define SDRAM_BXCR_SDSZ_64 0x00080000 /* 64M */
+#define SDRAM_BXCR_SDSZ_128 0x000a0000 /* 128M */
+#define SDRAM_BXCR_SDSZ_256 0x000c0000 /* 256M */
+#define SDRAM_BXCR_SDSZ_512 0x000e0000 /* 512M */
+#define SDRAM_BXCR_SDAM_MASK 0x0000e000 /* Addressing mode */
+#define SDRAM_BXCR_SDAM_1 0x00000000 /* Mode 1 */
+#define SDRAM_BXCR_SDAM_2 0x00002000 /* Mode 2 */
+#define SDRAM_BXCR_SDAM_3 0x00004000 /* Mode 3 */
+#define SDRAM_BXCR_SDAM_4 0x00006000 /* Mode 4 */
+#define SDRAM_BXCR_SDBE 0x00000001 /* Memory Bank Enable */
/*-----------------------------------------------------------------------------+
| SDRAM TR0 Options
+-----------------------------------------------------------------------------*/
-#define SDRAM_TR0_SDWR_MASK 0x80000000
-#define SDRAM_TR0_SDWR_2_CLK 0x00000000
-#define SDRAM_TR0_SDWR_3_CLK 0x80000000
-#define SDRAM_TR0_SDWD_MASK 0x40000000
-#define SDRAM_TR0_SDWD_0_CLK 0x00000000
-#define SDRAM_TR0_SDWD_1_CLK 0x40000000
-#define SDRAM_TR0_SDCL_MASK 0x01800000
-#define SDRAM_TR0_SDCL_2_0_CLK 0x00800000
-#define SDRAM_TR0_SDCL_2_5_CLK 0x01000000
-#define SDRAM_TR0_SDCL_3_0_CLK 0x01800000
-#define SDRAM_TR0_SDPA_MASK 0x000C0000
-#define SDRAM_TR0_SDPA_2_CLK 0x00040000
-#define SDRAM_TR0_SDPA_3_CLK 0x00080000
-#define SDRAM_TR0_SDPA_4_CLK 0x000C0000
-#define SDRAM_TR0_SDCP_MASK 0x00030000
-#define SDRAM_TR0_SDCP_2_CLK 0x00000000
-#define SDRAM_TR0_SDCP_3_CLK 0x00010000
-#define SDRAM_TR0_SDCP_4_CLK 0x00020000
-#define SDRAM_TR0_SDCP_5_CLK 0x00030000
-#define SDRAM_TR0_SDLD_MASK 0x0000C000
-#define SDRAM_TR0_SDLD_1_CLK 0x00000000
-#define SDRAM_TR0_SDLD_2_CLK 0x00004000
-#define SDRAM_TR0_SDRA_MASK 0x0000001C
-#define SDRAM_TR0_SDRA_6_CLK 0x00000000
-#define SDRAM_TR0_SDRA_7_CLK 0x00000004
-#define SDRAM_TR0_SDRA_8_CLK 0x00000008
-#define SDRAM_TR0_SDRA_9_CLK 0x0000000C
-#define SDRAM_TR0_SDRA_10_CLK 0x00000010
-#define SDRAM_TR0_SDRA_11_CLK 0x00000014
-#define SDRAM_TR0_SDRA_12_CLK 0x00000018
-#define SDRAM_TR0_SDRA_13_CLK 0x0000001C
-#define SDRAM_TR0_SDRD_MASK 0x00000003
-#define SDRAM_TR0_SDRD_2_CLK 0x00000001
-#define SDRAM_TR0_SDRD_3_CLK 0x00000002
-#define SDRAM_TR0_SDRD_4_CLK 0x00000003
+#define SDRAM_TR0_SDWR_MASK 0x80000000
+#define SDRAM_TR0_SDWR_2_CLK 0x00000000
+#define SDRAM_TR0_SDWR_3_CLK 0x80000000
+#define SDRAM_TR0_SDWD_MASK 0x40000000
+#define SDRAM_TR0_SDWD_0_CLK 0x00000000
+#define SDRAM_TR0_SDWD_1_CLK 0x40000000
+#define SDRAM_TR0_SDCL_MASK 0x01800000
+#define SDRAM_TR0_SDCL_2_0_CLK 0x00800000
+#define SDRAM_TR0_SDCL_2_5_CLK 0x01000000
+#define SDRAM_TR0_SDCL_3_0_CLK 0x01800000
+#define SDRAM_TR0_SDPA_MASK 0x000C0000
+#define SDRAM_TR0_SDPA_2_CLK 0x00040000
+#define SDRAM_TR0_SDPA_3_CLK 0x00080000
+#define SDRAM_TR0_SDPA_4_CLK 0x000C0000
+#define SDRAM_TR0_SDCP_MASK 0x00030000
+#define SDRAM_TR0_SDCP_2_CLK 0x00000000
+#define SDRAM_TR0_SDCP_3_CLK 0x00010000
+#define SDRAM_TR0_SDCP_4_CLK 0x00020000
+#define SDRAM_TR0_SDCP_5_CLK 0x00030000
+#define SDRAM_TR0_SDLD_MASK 0x0000C000
+#define SDRAM_TR0_SDLD_1_CLK 0x00000000
+#define SDRAM_TR0_SDLD_2_CLK 0x00004000
+#define SDRAM_TR0_SDRA_MASK 0x0000001C
+#define SDRAM_TR0_SDRA_6_CLK 0x00000000
+#define SDRAM_TR0_SDRA_7_CLK 0x00000004
+#define SDRAM_TR0_SDRA_8_CLK 0x00000008
+#define SDRAM_TR0_SDRA_9_CLK 0x0000000C
+#define SDRAM_TR0_SDRA_10_CLK 0x00000010
+#define SDRAM_TR0_SDRA_11_CLK 0x00000014
+#define SDRAM_TR0_SDRA_12_CLK 0x00000018
+#define SDRAM_TR0_SDRA_13_CLK 0x0000001C
+#define SDRAM_TR0_SDRD_MASK 0x00000003
+#define SDRAM_TR0_SDRD_2_CLK 0x00000001
+#define SDRAM_TR0_SDRD_3_CLK 0x00000002
+#define SDRAM_TR0_SDRD_4_CLK 0x00000003
/*-----------------------------------------------------------------------------+
| SDRAM TR1 Options
+-----------------------------------------------------------------------------*/
-#define SDRAM_TR1_RDSS_MASK 0xC0000000
-#define SDRAM_TR1_RDSS_TR0 0x00000000
-#define SDRAM_TR1_RDSS_TR1 0x40000000
-#define SDRAM_TR1_RDSS_TR2 0x80000000
-#define SDRAM_TR1_RDSS_TR3 0xC0000000
-#define SDRAM_TR1_RDSL_MASK 0x00C00000
-#define SDRAM_TR1_RDSL_STAGE1 0x00000000
-#define SDRAM_TR1_RDSL_STAGE2 0x00400000
-#define SDRAM_TR1_RDSL_STAGE3 0x00800000
-#define SDRAM_TR1_RDCD_MASK 0x00000800
-#define SDRAM_TR1_RDCD_RCD_0_0 0x00000000
-#define SDRAM_TR1_RDCD_RCD_1_2 0x00000800
-#define SDRAM_TR1_RDCT_MASK 0x000001FF
-#define SDRAM_TR1_RDCT_ENCODE(x) (((x) << 0) & SDRAM_TR1_RDCT_MASK)
-#define SDRAM_TR1_RDCT_DECODE(x) (((x) & SDRAM_TR1_RDCT_MASK) >> 0)
-#define SDRAM_TR1_RDCT_MIN 0x00000000
-#define SDRAM_TR1_RDCT_MAX 0x000001FF
+#define SDRAM_TR1_RDSS_MASK 0xC0000000
+#define SDRAM_TR1_RDSS_TR0 0x00000000
+#define SDRAM_TR1_RDSS_TR1 0x40000000
+#define SDRAM_TR1_RDSS_TR2 0x80000000
+#define SDRAM_TR1_RDSS_TR3 0xC0000000
+#define SDRAM_TR1_RDSL_MASK 0x00C00000
+#define SDRAM_TR1_RDSL_STAGE1 0x00000000
+#define SDRAM_TR1_RDSL_STAGE2 0x00400000
+#define SDRAM_TR1_RDSL_STAGE3 0x00800000
+#define SDRAM_TR1_RDCD_MASK 0x00000800
+#define SDRAM_TR1_RDCD_RCD_0_0 0x00000000
+#define SDRAM_TR1_RDCD_RCD_1_2 0x00000800
+#define SDRAM_TR1_RDCT_MASK 0x000001FF
+#define SDRAM_TR1_RDCT_ENCODE(x) (((x) << 0) & SDRAM_TR1_RDCT_MASK)
+#define SDRAM_TR1_RDCT_DECODE(x) (((x) & SDRAM_TR1_RDCT_MASK) >> 0)
+#define SDRAM_TR1_RDCT_MIN 0x00000000
+#define SDRAM_TR1_RDCT_MAX 0x000001FF
/*-----------------------------------------------------------------------------+
| SDRAM WDDCTR Options
+-----------------------------------------------------------------------------*/
-#define SDRAM_WDDCTR_WRCP_MASK 0xC0000000
-#define SDRAM_WDDCTR_WRCP_0DEG 0x00000000
-#define SDRAM_WDDCTR_WRCP_90DEG 0x40000000
-#define SDRAM_WDDCTR_WRCP_180DEG 0x80000000
-#define SDRAM_WDDCTR_DCD_MASK 0x000001FF
+#define SDRAM_WDDCTR_WRCP_MASK 0xC0000000
+#define SDRAM_WDDCTR_WRCP_0DEG 0x00000000
+#define SDRAM_WDDCTR_WRCP_90DEG 0x40000000
+#define SDRAM_WDDCTR_WRCP_180DEG 0x80000000
+#define SDRAM_WDDCTR_DCD_MASK 0x000001FF
/*-----------------------------------------------------------------------------+
| SDRAM CLKTR Options
+-----------------------------------------------------------------------------*/
-#define SDRAM_CLKTR_CLKP_MASK 0xC0000000
-#define SDRAM_CLKTR_CLKP_0DEG 0x00000000
-#define SDRAM_CLKTR_CLKP_90DEG 0x40000000
-#define SDRAM_CLKTR_CLKP_180DEG 0x80000000
-#define SDRAM_CLKTR_DCDT_MASK 0x000001FF
+#define SDRAM_CLKTR_CLKP_MASK 0xC0000000
+#define SDRAM_CLKTR_CLKP_0DEG 0x00000000
+#define SDRAM_CLKTR_CLKP_90DEG 0x40000000
+#define SDRAM_CLKTR_CLKP_180DEG 0x80000000
+#define SDRAM_CLKTR_DCDT_MASK 0x000001FF
/*-----------------------------------------------------------------------------+
| SDRAM DLYCAL Options
+-----------------------------------------------------------------------------*/
-#define SDRAM_DLYCAL_DLCV_MASK 0x000003FC
-#define SDRAM_DLYCAL_DLCV_ENCODE(x) (((x)<<2) & SDRAM_DLYCAL_DLCV_MASK)
-#define SDRAM_DLYCAL_DLCV_DECODE(x) (((x) & SDRAM_DLYCAL_DLCV_MASK)>>2)
+#define SDRAM_DLYCAL_DLCV_MASK 0x000003FC
+#define SDRAM_DLYCAL_DLCV_ENCODE(x) (((x)<<2) & SDRAM_DLYCAL_DLCV_MASK)
+#define SDRAM_DLYCAL_DLCV_DECODE(x) (((x) & SDRAM_DLYCAL_DLCV_MASK)>>2)
/*-----------------------------------------------------------------------------+
| General Definition
+-----------------------------------------------------------------------------*/
-#define DEFAULT_SPD_ADDR1 0x53
-#define DEFAULT_SPD_ADDR2 0x52
-#define MAXBANKS 4 /* at most 4 dimm banks */
-#define MAX_SPD_BYTES 256
-#define NUMHALFCYCLES 4
-#define NUMMEMTESTS 8
-#define NUMMEMWORDS 8
-#define MAXBXCR 4
-#define TRUE 1
-#define FALSE 0
+#define DEFAULT_SPD_ADDR1 0x53
+#define DEFAULT_SPD_ADDR2 0x52
+#define MAXBANKS 4 /* at most 4 dimm banks */
+#define MAX_SPD_BYTES 256
+#define NUMHALFCYCLES 4
+#define NUMMEMTESTS 8
+#define NUMMEMWORDS 8
+#define MAXBXCR 4
+#define TRUE 1
+#define FALSE 0
const unsigned long test[NUMMEMTESTS][NUMMEMWORDS] = {
{0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
@@ -666,37 +666,37 @@ unsigned char spd_read(uchar chip, uint addr);
void get_spd_info(unsigned long* dimm_populated,
unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks);
+ unsigned long num_dimm_banks);
void check_mem_type
(unsigned long* dimm_populated,
unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks);
+ unsigned long num_dimm_banks);
void check_volt_type
(unsigned long* dimm_populated,
unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks);
+ unsigned long num_dimm_banks);
void program_cfg0(unsigned long* dimm_populated,
unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks);
+ unsigned long num_dimm_banks);
void program_cfg1(unsigned long* dimm_populated,
unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks);
+ unsigned long num_dimm_banks);
void program_rtr (unsigned long* dimm_populated,
unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks);
+ unsigned long num_dimm_banks);
void program_tr0 (unsigned long* dimm_populated,
unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks);
+ unsigned long num_dimm_banks);
void program_tr1 (void);
-void program_ecc (unsigned long num_bytes);
+void program_ecc (unsigned long num_bytes);
unsigned
long program_bxcr(unsigned long* dimm_populated,
@@ -719,7 +719,7 @@ long int spd_sdram(void) {
unsigned long total_size;
unsigned long cfg0;
unsigned long mcsts;
- unsigned long num_dimm_banks; /* on board dimm banks */
+ unsigned long num_dimm_banks; /* on board dimm banks */
num_dimm_banks = sizeof(iic0_dimm_addr);
@@ -841,7 +841,7 @@ unsigned char spd_read(uchar chip, uint addr)
void get_spd_info(unsigned long* dimm_populated,
unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks)
+ unsigned long num_dimm_banks)
{
unsigned long dimm_num;
unsigned long dimm_found;
@@ -931,7 +931,7 @@ void check_volt_type(unsigned long* dimm_populated,
void program_cfg0(unsigned long* dimm_populated,
unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks)
+ unsigned long num_dimm_banks)
{
unsigned long dimm_num;
unsigned long cfg0;
@@ -1021,7 +1021,7 @@ void program_cfg0(unsigned long* dimm_populated,
void program_cfg1(unsigned long* dimm_populated,
unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks)
+ unsigned long num_dimm_banks)
{
unsigned long cfg1;
mfsdram(mem_cfg1, cfg1);
@@ -1039,7 +1039,7 @@ void program_cfg1(unsigned long* dimm_populated,
void program_rtr (unsigned long* dimm_populated,
unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks)
+ unsigned long num_dimm_banks)
{
unsigned long dimm_num;
unsigned long bus_period_x_10;
@@ -1100,7 +1100,7 @@ void program_rtr (unsigned long* dimm_populated,
void program_tr0 (unsigned long* dimm_populated,
unsigned char* iic0_dimm_addr,
- unsigned long num_dimm_banks)
+ unsigned long num_dimm_banks)
{
unsigned long dimm_num;
unsigned long tr0;
@@ -1159,7 +1159,7 @@ void program_tr0 (unsigned long* dimm_populated,
for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
if (dimm_populated[dimm_num] == TRUE) {
wcsbc = spd_read(iic0_dimm_addr[dimm_num], 15);
- t_rp_ns = spd_read(iic0_dimm_addr[dimm_num], 27) >> 2;
+ t_rp_ns = spd_read(iic0_dimm_addr[dimm_num], 27) >> 2;
t_rcd_ns = spd_read(iic0_dimm_addr[dimm_num], 29) >> 2;
t_ras_ns = spd_read(iic0_dimm_addr[dimm_num], 30);
cas_bit = spd_read(iic0_dimm_addr[dimm_num], 18);
@@ -1234,7 +1234,7 @@ void program_tr0 (unsigned long* dimm_populated,
/*
* Program SD_WR and SD_WCSBC fields
*/
- tr0 |= SDRAM_TR0_SDWR_2_CLK; /* Write Recovery: 2 CLK */
+ tr0 |= SDRAM_TR0_SDWR_2_CLK; /* Write Recovery: 2 CLK */
switch (wcsbc) {
case 0:
tr0 |= SDRAM_TR0_SDWD_0_CLK;
@@ -1623,8 +1623,8 @@ unsigned long program_bxcr(unsigned long* dimm_populated,
unsigned long ctrl_bank_num[MAXBANKS];
unsigned long bx_cr_num;
unsigned long largest_size_index;
- unsigned long largest_size;
- unsigned long current_size_index;
+ unsigned long largest_size;
+ unsigned long current_size_index;
BANKPARMS bank_parms[MAXBXCR];
unsigned long sorted_bank_num[MAXBXCR]; /* DDR Controller bank number table (sorted by size) */
unsigned long sorted_bank_size[MAXBXCR]; /* DDR Controller bank size table (sorted by size)*/
@@ -1785,7 +1785,7 @@ unsigned long program_bxcr(unsigned long* dimm_populated,
return(bank_base_addr);
}
-void program_ecc (unsigned long num_bytes)
+void program_ecc (unsigned long num_bytes)
{
unsigned long bank_base_addr;
unsigned long current_address;
diff --git a/doc/README.OFT b/doc/README.OFT
index 8f00ebb2b..dd1c632bc 100644
--- a/doc/README.OFT
+++ b/doc/README.OFT
@@ -5,7 +5,7 @@ As part of the ongoing cleanup of the Linux PPC trees, the preferred
way to pass bootloader and board setup information is the open
firmware flat tree.
-Please take a look at the following email discussion for some
+Please take a look at the following email discussion for some
background.
http://ozlabs.org/pipermail/linuxppc-dev/2005-August/019408.html
diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index ba2f4ead2..41f44c5a3 100644
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -95,14 +95,14 @@
* When CFG_MAX_FLASH_BANKS_DETECT is defined, the actual number of Flash
* banks has to be determined at runtime and stored in a gloabl variable
* tqm834x_num_flash_banks. The value of CFG_MAX_FLASH_BANKS_DETECT is only
- * used insted of CFG_MAX_FLASH_BANKS to allocate the array flash_info, and
+ * used instead of CFG_MAX_FLASH_BANKS to allocate the array flash_info, and
* should be made sufficiently large to accomodate the number of banks that
- * might acutally be detected. Since most (all?) Flash related functions use
+ * might actually be detected. Since most (all?) Flash related functions use
* CFG_MAX_FLASH_BANKS as the number of actual banks on the board, it is
* defined as tqm834x_num_flash_banks.
*/
#define CFG_MAX_FLASH_BANKS_DETECT 2
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLY__
extern int tqm834x_num_flash_banks;
#endif
#define CFG_MAX_FLASH_BANKS (tqm834x_num_flash_banks)
diff --git a/include/configs/o2dnt.h b/include/configs/o2dnt.h
index 981651ab0..d7d27e51a 100644
--- a/include/configs/o2dnt.h
+++ b/include/configs/o2dnt.h
@@ -277,7 +277,7 @@
#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
#ifdef CFG_PCISPEED_66
-/*
+/*
* For 66 MHz PCI clock additional Wait State is needed for CS0 (flash).
*/
#define CFG_BOOTCS_CFG 0x00057801 /* for pci_clk = 66 MHz */
diff --git a/lib_mips/board.c b/lib_mips/board.c
index 5dfdf90d6..b7d335641 100644
--- a/lib_mips/board.c
+++ b/lib_mips/board.c
@@ -125,7 +125,7 @@ static void display_flash_config(ulong size)
static int init_baudrate (void)
{
- uchar tmp[64]; /* long enough for environment variables */
+ char tmp[64]; /* long enough for environment variables */
int i = getenv_r ("baudrate", tmp, sizeof (tmp));
gd->baudrate = (i > 0)
diff --git a/lib_mips/mips_linux.c b/lib_mips/mips_linux.c
index 18eafe13d..12e84359c 100644
--- a/lib_mips/mips_linux.c
+++ b/lib_mips/mips_linux.c
@@ -94,7 +94,7 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[],
checksum = ntohl (hdr->ih_hcrc);
hdr->ih_hcrc = 0;
- if (crc32 (0, (char *) data, len) != checksum) {
+ if (crc32 (0, (uchar *) data, len) != checksum) {
printf ("Bad Header Checksum\n");
SHOW_BOOT_PROGRESS (-11);
do_reset (cmdtp, flag, argc, argv);
@@ -111,7 +111,7 @@ void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[],
ulong csum = 0;
printf (" Verifying Checksum ... ");
- csum = crc32 (0, (char *) data, len);
+ csum = crc32 (0, (uchar *) data, len);
if (csum != ntohl (hdr->ih_dcrc)) {
printf ("Bad Data CRC\n");
SHOW_BOOT_PROGRESS (-12);
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index f2a474606..f40bb253b 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -581,7 +581,6 @@ void board_init_f (ulong bootflag)
/* NOTREACHED - relocate_code() does not return */
}
-
/************************************************************************
*
* This is the next part if the initialization sequence: we are now
@@ -591,7 +590,6 @@ void board_init_f (ulong bootflag)
*
************************************************************************
*/
-
void board_init_r (gd_t *id, ulong dest_addr)
{
cmd_tbl_t *cmdtp;
@@ -1124,8 +1122,6 @@ static inline void mdm_readline(char *buf, int bufsiz)
}
}
-
-
extern void dbg(const char *fmt, ...);
int mdm_init (void)
{
generated by cgit v1.2.3-70-g09d2 (git 2.51.2) at 2025-10-31 20:42:08 +0000