diff options
77 files changed, 7685 insertions, 290 deletions
@@ -1,3 +1,394 @@ +commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39 +Author: Heiko Schocher <hs@pollux.denx.de> +Date: Fri Jan 19 19:57:10 2007 +0100 + + [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT. + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167 +Author: Heiko Schocher <hs@pollux.denx.de> +Date: Fri Jan 19 18:05:26 2007 +0100 + + [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver + if you must swap the bytes between reading/writing. + (Needed for the SC3 board) + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276 +Author: Stefan Roese <sr@denx.de> +Date: Thu Jan 18 16:05:47 2007 +0100 + + [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e +Author: Stefan Roese <sr@denx.de> +Date: Thu Jan 18 11:54:52 2007 +0100 + + [PATCH] Update Prodrive P3Mx support + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 34167a36c29ee946b727465db5c014746a08e978 +Author: Stefan Roese <sr@denx.de> +Date: Thu Jan 18 11:48:10 2007 +0100 + + [PATCH] Add missing Taishan config file + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit cb4820725e9fc409c5cbc8e83054a6ed522d2111 +Author: Heiko Schocher <hs@pollux.denx.de> +Date: Thu Jan 18 11:28:51 2007 +0100 + + [PATCH] Fix: Compilerwarnings for SC3 board. + The EBC Configuration Register is now by CFG_EBC_CFG definable + Added JFFS2 support for the SC3 board. + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd +Author: Stefan Roese <sr@denx.de> +Date: Thu Jan 18 10:25:34 2007 +0100 + + [PATCH] Add support for AMCC Taishan PPC440GX eval board + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Tue Jan 16 18:30:50 2007 +0100 + + Raname solidcard3 into sc3; add redundant env for sc3 + +commit 1bbbbdd20fcec9933697000dcf55ff7972622596 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Tue Jan 16 12:46:35 2007 +0100 + + Update default environment for Solidcard3 + +commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd +Author: Stefan Roese <sr@denx.de> +Date: Mon Jan 15 09:46:29 2007 +0100 + + [PATCH] Fix 440SPe rev B detection from previous patch + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit a443d31410c571ee8f970da819a44d698fdd6b1f +Author: Heiko Schocher <hs@pollux.denx.de> +Date: Sun Jan 14 13:35:31 2007 +0100 + + [FIX] correct I2C Writes for the LM81 Sensor. + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 0bba5452835f19a61204edcda3a58112fd8e2208 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Sat Jan 13 11:17:10 2007 +0100 + + Undo commit 3033ebb2: reset command does not take any arguments + + Haiying Wang's modification to the reset command was broken, undo it. + + Signed-off-by: Wolfgang Denk <wd@denx.de> + +commit 95981778cff0038fd9941044d6a3eda810e33258 +Author: Stefan Roese <sr@denx.de> +Date: Sat Jan 13 08:01:03 2007 +0100 + + [PATCH] Update 440SP(e) cpu revisions + + Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7 +Author: Stefan Roese <sr@denx.de> +Date: Sat Jan 13 07:59:56 2007 +0100 + + [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed + + Now the board revision and the current PCI bus speed are printed after + the board message. + + Also the EBC initialising is now done via defines in the board config + file. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 36adff362c2c0141ff8a810d42a7e478f779130f +Author: Stefan Roese <sr@denx.de> +Date: Sat Jan 13 07:59:19 2007 +0100 + + [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed + + Now the board revision and the current PCI bus speed are printed after + the board message. + + Also the EBC initialising is now done via defines in the board config + file. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6 +Author: Stefan Roese <sr@denx.de> +Date: Sat Jan 13 07:57:51 2007 +0100 + + [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed + + Now the board revision and the current PCI bus speed are printed after + the board message. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit ca43ba18e910206ef8063e4b22d282630bff3fd2 +Author: Heiko Schocher <hs@pollux.denx.de> +Date: Thu Jan 11 15:44:44 2007 +0100 + + Added support for the SOLIDCARD III board from Eurodesign + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 6abaee42621c07e81a2cd189ad4368b5e8c50280 +Author: Reinhard Thies <Reinhard.Thies@web.de> +Date: Wed Jan 10 14:41:14 2007 +0100 + + Adjusted default environment for cam5200 board. + +commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Wed Jan 10 15:35:52 2007 +0100 + + Update CHANGELOG + +commit 787fa15860a57833e50bd30555079a9cd4e519b8 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Wed Jan 10 01:28:39 2007 +0100 + + Fix auto_update for MCC200 board. + + The invocation of do_auto_update() is moved to the end of the + misc_init_r() function, after the flash mappings have been + initialized. Please find attached a patch that implements that + change. + + Also correct the decoding of the keypad status. With this update, the + key that will trigger the update is Column 2, Row 2. + +commit d9384de2f571046e71081bae22b49e3d5ca2e3d5 +Author: Marian Balakowicz <m8@semihalf.com> +Date: Wed Jan 10 00:26:15 2007 +0100 + + CAM5200 flash driver modifications: + - use CFI driver (replaces custom flash driver) for main 'cam5200' target + - add second build target 'cam5200_niosflash' which still uses custom driver + +commit 67fea022fa957f59653b5238c7496f80a6b70432 +Author: Markus Klotzbuecher <mk@denx.de> +Date: Tue Jan 9 16:02:48 2007 +0100 + + SPC1920: cleanup memory contoller setup + +commit 8fc2102faa23593c80381437c09f7745a14deb40 +Author: Markus Klotzbuecher <mk@denx.de> +Date: Tue Jan 9 14:57:14 2007 +0100 + + Fix the cpu speed setup to work with all boards. + +commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c +Author: Markus Klotzbuecher <mk@denx.de> +Date: Tue Jan 9 14:57:13 2007 +0100 + + SPC1920: add support for the FM18L08 Ramtron FRAM + +commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223 +Author: Markus Klotzbuecher <mk@denx.de> +Date: Tue Jan 9 14:57:13 2007 +0100 + + SPC1920: update the HPI register addresses to work with the second + generation of hardware + +commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e +Author: Markus Klotzbuecher <mk@creamnet.de> +Date: Tue Jan 9 14:57:13 2007 +0100 + + Miscellanious spc1920 related cleanups + +commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120 +Author: Markus Klotzbuecher <mk@denx.de> +Date: Tue Jan 9 14:57:12 2007 +0100 + + SPC1920 GO/NOGO led should be set to color red in U-Boot + +commit 0be62728aac459ba268d6d752ed49ec0e2bc7348 +Author: Markus Klotzbuecher <mk@creamnet.de> +Date: Tue Jan 9 14:57:12 2007 +0100 + + Add support for the DS3231 RTC + +commit 8139567b60d678584b05f0718a681f2047c5e14f +Author: Markus Klotzbuecher <mk@creamnet.de> +Date: Tue Jan 9 14:57:11 2007 +0100 + + SMC1 uses external CLK4 instead of BRG on spc1920 + +commit d8d9de1a02fbd880b613d607143d1f57342affc7 +Author: Markus Klotzbuecher <mk@creamnet.de> +Date: Tue Jan 9 14:57:10 2007 +0100 + + Update the SPC1920 CMB PLD driver + +commit 3f34f869162750e5e999fd140f884f5de952bcfe +Author: Markus Klotzbuecher <mk@creamnet.de> +Date: Tue Jan 9 14:57:10 2007 +0100 + + Add / enable I2C support on the spc1920 board + +commit d28707dbce1e9ac2017ad051da4133bf22b4204f +Author: Markus Klotzbuecher <mk@creamnet.de> +Date: Tue Jan 9 14:57:10 2007 +0100 + + Add support for the tms320671x host port interface (HPI) + +commit f4eb54529bb3664c3a562e488b460fe075f79d67 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Sun Jan 7 00:13:11 2007 +0100 + + Prepare for release 1.2.0 + +commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02 +Author: Stefan Roese <sr@denx.de> +Date: Sat Jan 6 15:58:09 2007 +0100 + + [PATCH] 44x: Fix problem with DDR controller setup (refresh rate) + + This patch fixes a problem with an incorrect setup for the refresh + timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit f16c1da9577f06c5fc08651a4065537407de4635 +Author: Stefan Roese <sr@denx.de> +Date: Sat Jan 6 15:56:13 2007 +0100 + + [PATCH] Update ALPR board files + + This update brings the ALPR board support to the newest version. + It also fixes a problem with the NAND driver. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit cd1d937f90250a32988c37b2b4af8364d25de8ed +Author: Stefan Roese <sr@denx.de> +Date: Fri Jan 5 11:46:05 2007 +0100 + + [PATCH] nand: Fix problem with oobsize calculation + + Here the description from Brian Brelsford <Brian_Brelsford@dell.com>: + + The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part + returns a 0x15. In the code fragment below bits [1:0] determine the + page size, it is ANDed via "(extid & 0x3)" then shifted out. The + next field is also ANDed with 0x3. However this is a one bit field + as defined in the Hynix and Samsung parts in the 4th ID byte that + determins the oobsize, not a two bit field. It works on Samsung as + bits[3:2] are 01. However for the Hynix there is a 11 in these two + bits, so the oob size gets messed up. + + I checked the correct linux code and the suggested fix from Brian is + also available in the linux nand mtd driver. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e +Author: Stefan Roese <sr@denx.de> +Date: Fri Jan 5 10:40:36 2007 +0100 + + [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx) + + This fix will make the MAL burst disabling patch for the Linux + EMAC driver obsolete. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 023889838282b6237b401664f22dd22dfba2c066 +Author: Stefan Roese <sr@denx.de> +Date: Fri Jan 5 10:38:05 2007 +0100 + + [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board + + This code will optimize the DDR2 controller setup on a board specific + basis. + + Note: This code doesn't work right now on the NAND booting image for the + Sequoia board, since it doesn't fit into the 4kBytes for the SPL image. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit cce4acbb68398634b8d011ed7bb0d12269c84230 +Author: Bartlomiej Sieka <tur@semihalf.com> +Date: Thu Dec 28 19:08:21 2006 +0100 + + Few V38B changes: + - fix a typo in V38B config file + - move watchdog initialisation earlier in the boot process + - add "wdt=off" to default kernel command line (disables kernel watchdog) + +commit 92eb729bad876725aeea908d2addba0800620840 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Wed Dec 27 01:26:13 2006 +0100 + + Fix bug in adaption of Stefano Babic's CFI driver patch. + +commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Sun Dec 24 01:42:57 2006 +0100 + + Minor code cleanup. + +commit d784fdb05900ada3686d5778783e1fb328e9fb66 +Author: Stefano Babic <sbabic@denx.de> +Date: Tue Dec 12 00:22:42 2006 +0100 + + Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode) + +commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2 +Author: Stefan Roese <sr@denx.de> +Date: Fri Dec 22 14:29:40 2006 +0100 + + [PATCH] Fix sequoia flash autodetection (finally correct) + + Now 32MByte and 64MByte FLASH is know to work and other + configurations should work too. + + Signed-off-by: Stefan Roese <sr@denx.de> + +commit 82e5236a8b719543643fd26d5827938ab2b94818 +Author: Wolfgang Denk <wd@pollux.denx.de> +Date: Fri Dec 22 10:30:26 2006 +0100 + + Minor code cleanup; update CHANGELOG. + +commit fa23044564091f05d9695beb7b5b9a931e7f41a4 +Author: Heiko Schocher <hs@pollux.denx.de> +Date: Thu Dec 21 17:17:02 2006 +0100 + + Added support for the TQM8272 board from TQ + + Signed-off-by: Heiko Schocher <hs@denx.de> + +commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c +Author: Heiko Schocher <hs@pollux.denx.de> +Date: Thu Dec 21 16:14:48 2006 +0100 + + [PATCH] Add support for the UC101 board from MAN. + + Signed-off-by: Heiko Schocher <hs@denx.de> + commit c84bad0ef60e7055ab0bd49b93069509cecc382a Author: Bartlomiej Sieka <tur@semihalf.com> Date: Wed Dec 20 00:29:43 2006 +0100 @@ -210,7 +601,7 @@ Date: Mon Nov 27 17:04:06 2006 +0100 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel This patch allows an arch/ppc kernel to be booted by just passing 1 or 2 - arguments to bootm. It removes the getenv("disable_of") test that used + arguments to bootm. It removes the getenv("disable_of") test that used to be used for this purpose. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> @@ -908,7 +1299,7 @@ Date: Tue Oct 24 23:47:37 2006 -0500 If a Multi-Image file contains a third image we try to use it as a device tree. The device tree image is assumed to be uncompressed in the - image file. We automatically allocate space for the device tree in memory + image file. We automatically allocate space for the device tree in memory and provide an 8k pad to allow more than a reasonable amount of growth. Additionally, a device tree that was contained in flash will now automatically diff --git a/MAINTAINERS b/MAINTAINERS index ce20def81..e9203eb05 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -292,6 +292,7 @@ Stefan Roese <sr@denx.de> pcs440ep PPC440EP sequoia PPC440EPx sycamore PPC405GPr + taishan PPC440GX walnut PPC405GP yellowstone PPC440GR yosemite PPC440EP @@ -464,6 +465,7 @@ Stefan Roese <sr@denx.de> ixdpg425 xscale pdnb3 xscale + scpu xscale Robert Schwebel <r.schwebel@pengutronix.de> @@ -85,10 +85,11 @@ LIST_4xx=" \ MIP405 MIP405T ML2 ml300 \ ocotea OCRTC ORSG p3p440 \ PCI405 pcs440ep PIP405 PLU405 \ - PMC405 PPChameleonEVB sbc405 sequoia \ - sequoia_nand VOH405 VOM405 W7OLMC \ - W7OLMG walnut WUH405 XPEDITE1K \ - yellowstone yosemite yucca \ + PMC405 PPChameleonEVB sbc405 sc3 \ + sequoia sequoia_nand taishan VOH405 \ + VOM405 W7OLMC W7OLMG walnut \ + WUH405 XPEDITE1K yellowstone yosemite \ + yucca \ " ######################################################################### @@ -225,7 +226,7 @@ LIST_pxa=" \ xsengine zylonite \ " -LIST_ixp="ixdp425 ixdpg425 pdnb3" +LIST_ixp="ixdp425 ixdpg425 pdnb3 scpu" LIST_arm=" \ @@ -22,8 +22,8 @@ # VERSION = 1 -PATCHLEVEL = 1 -SUBLEVEL = 6 +PATCHLEVEL = 2 +SUBLEVEL = 0 EXTRAVERSION = U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) VERSION_FILE = $(obj)include/version_autogenerated.h @@ -557,6 +557,7 @@ Total5200_Rev2_lowboot_config: unconfig @$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200 cam5200_config \ +cam5200_niosflash_config \ fo300_config \ MiniFAP_config \ TQM5200S_config \ @@ -574,6 +575,10 @@ TQM5200_STK100_config: unconfig echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ echo "... TQM5200S on Cam5200" ; \ } + @[ -z "$(findstring niosflash,$@)" ] || \ + { echo "#define CONFIG_CAM5200_NIOSFLASH" >>$(obj)include/config.h ; \ + echo "... with NIOS flash driver" ; \ + } @[ -z "$(findstring fo300,$@)" ] || \ { echo "#define CONFIG_FO300" >>$(obj)include/config.h ; \ echo "... TQM5200 on FO300" ; \ @@ -597,6 +602,8 @@ TQM5200_STK100_config: unconfig { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \ } @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200 +uc101_config: unconfig + @$(MKCONFIG) uc101 ppc mpc5xxx uc101 ######################################################################### ## MPC8xx Systems @@ -1193,10 +1200,16 @@ sequoia_nand_config: unconfig @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk +sc3_config:unconfig + @./mkconfig $(@:_config=) ppc ppc4xx sc3 + sycamore_config: unconfig @echo "Configuring for sycamore board as subset of walnut..." @$(MKCONFIG) -a walnut ppc ppc4xx walnut amcc +taishan_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc + VOH405_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd @@ -2056,8 +2069,15 @@ pleb2_config : unconfig logodl_config : unconfig @$(MKCONFIG) $(@:_config=) arm pxa logodl -pdnb3_config : unconfig - @$(MKCONFIG) $(@:_config=) arm ixp pdnb3 prodrive +pdnb3_config \ +scpu_config: unconfig + @if [ "$(findstring scpu_,$@)" ] ; then \ + echo "#define CONFIG_SCPU" >>include/config.h ; \ + echo "... on SCPU board variant" ; \ + else \ + >include/config.h ; \ + fi + @$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive pxa255_idp_config: unconfig @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp diff --git a/board/amcc/sequoia/init.S b/board/amcc/sequoia/init.S index 3d4ac8543..45bcd4bef 100644 --- a/board/amcc/sequoia/init.S +++ b/board/amcc/sequoia/init.S @@ -90,7 +90,7 @@ tlbtab: /* * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the * speed up boot process. It is patched after relocation to enable SA_I - */ + */ #ifndef CONFIG_NAND_SPL tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G ) #else diff --git a/board/amcc/sequoia/sdram.c b/board/amcc/sequoia/sdram.c index 53f728def..77f143844 100644 --- a/board/amcc/sequoia/sdram.c +++ b/board/amcc/sequoia/sdram.c @@ -1,5 +1,12 @@ /* * (C) Copyright 2006 + * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com + * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com + * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com + * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com + * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com + * + * (C) Copyright 2006 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * This program is free software; you can redistribute it and/or @@ -18,10 +25,352 @@ * MA 02111-1307 USA */ +/* define DEBUG for debug output */ +#undef DEBUG + #include <common.h> #include <asm/processor.h> +#include <asm/io.h> #include <ppc440.h> +#include "sdram.h" + +#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) || \ + defined(CONFIG_DDR_DATA_EYE) +/*-----------------------------------------------------------------------------+ + * wait_for_dlllock. + +----------------------------------------------------------------------------*/ +static int wait_for_dlllock(void) +{ + unsigned long val; + int wait = 0; + + /* -----------------------------------------------------------+ + * Wait for the DCC master delay line to finish calibration + * ----------------------------------------------------------*/ + mtdcr(ddrcfga, DDR0_17); + val = DDR0_17_DLLLOCKREG_UNLOCKED; + + while (wait != 0xffff) { + val = mfdcr(ddrcfgd); + if ((val & DDR0_17_DLLLOCKREG_MASK) == DDR0_17_DLLLOCKREG_LOCKED) + /* dlllockreg bit on */ + return 0; + else + wait++; + } + debug("0x%04x: DDR0_17 Value (dlllockreg bit): 0x%08x\n", wait, val); + debug("Waiting for dlllockreg bit to raise\n"); + + return -1; +} +#endif + +#if defined(CONFIG_DDR_DATA_EYE) +/*-----------------------------------------------------------------------------+ + * wait_for_dram_init_complete. + +----------------------------------------------------------------------------*/ +int wait_for_dram_init_complete(void) +{ + unsigned long val; + int wait = 0; + + /* --------------------------------------------------------------+ + * Wait for 'DRAM initialization complete' bit in status register + * -------------------------------------------------------------*/ + mtdcr(ddrcfga, DDR0_00); + + while (wait != 0xffff) { + val = mfdcr(ddrcfgd); + if ((val & DDR0_00_INT_STATUS_BIT6) == DDR0_00_INT_STATUS_BIT6) + /* 'DRAM initialization complete' bit */ + return 0; + else + wait++; + } + + debug("DRAM initialization complete bit in status register did not rise\n"); + + return -1; +} + +#define NUM_TRIES 64 +#define NUM_READS 10 + +/*-----------------------------------------------------------------------------+ + * denali_core_search_data_eye. + +----------------------------------------------------------------------------*/ +void denali_core_search_data_eye(unsigned long memory_size) +{ + int k, j; + u32 val; + u32 wr_dqs_shift, dqs_out_shift, dll_dqs_delay_X; + u32 max_passing_cases = 0, wr_dqs_shift_with_max_passing_cases = 0; + u32 passing_cases = 0, dll_dqs_delay_X_sw_val = 0; + u32 dll_dqs_delay_X_start_window = 0, dll_dqs_delay_X_end_window = 0; + volatile u32 *ram_pointer; + u32 test[NUM_TRIES] = { + 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, + 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, + 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, + 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, + 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, + 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, + 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, + 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, + 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, + 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, + 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, + 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, + 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, + 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, + 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 }; + + ram_pointer = (volatile u32 *)(CFG_SDRAM_BASE); + + for (wr_dqs_shift = 64; wr_dqs_shift < 96; wr_dqs_shift++) { + /*for (wr_dqs_shift=1; wr_dqs_shift<96; wr_dqs_shift++) {*/ + + /* -----------------------------------------------------------+ + * De-assert 'start' parameter. + * ----------------------------------------------------------*/ + mtdcr(ddrcfga, DDR0_02); + val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF; + mtdcr(ddrcfgd, val); + + /* -----------------------------------------------------------+ + * Set 'wr_dqs_shift' + * ----------------------------------------------------------*/ + mtdcr(ddrcfga, DDR0_09); + val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK) + | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift); + mtdcr(ddrcfgd, val); + + /* -----------------------------------------------------------+ + * Set 'dqs_out_shift' = wr_dqs_shift + 32 + * ----------------------------------------------------------*/ + dqs_out_shift = wr_dqs_shift + 32; + mtdcr(ddrcfga, DDR0_22); + val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK) + | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift); + mtdcr(ddrcfgd, val); + + passing_cases = 0; + + for (dll_dqs_delay_X = 1; dll_dqs_delay_X < 64; dll_dqs_delay_X++) { + /*for (dll_dqs_delay_X=1; dll_dqs_delay_X<128; dll_dqs_delay_X++) {*/ + /* -----------------------------------------------------------+ + * Set 'dll_dqs_delay_X'. + * ----------------------------------------------------------*/ + /* dll_dqs_delay_0 */ + mtdcr(ddrcfga, DDR0_17); + val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK) + | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X); + mtdcr(ddrcfgd, val); + /* dll_dqs_delay_1 to dll_dqs_delay_4 */ + mtdcr(ddrcfga, DDR0_18); + val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK) + | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X) + | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X) + | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X) + | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X); + mtdcr(ddrcfgd, val); + /* dll_dqs_delay_5 to dll_dqs_delay_8 */ + mtdcr(ddrcfga, DDR0_19); + val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK) + | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X) + | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X) + | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X) + | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X); + mtdcr(ddrcfgd, val); + + ppcMsync(); + ppcMbar(); + + /* -----------------------------------------------------------+ + * Assert 'start' parameter. + * ----------------------------------------------------------*/ + mtdcr(ddrcfga, DDR0_02); + val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON; + mtdcr(ddrcfgd, val); + + ppcMsync(); + ppcMbar(); + + /* -----------------------------------------------------------+ + * Wait for the DCC master delay line to finish calibration + * ----------------------------------------------------------*/ + if (wait_for_dlllock() != 0) { + printf("dlllock did not occur !!!\n"); + printf("denali_core_search_data_eye!!!\n"); + printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n", + wr_dqs_shift, dll_dqs_delay_X); + hang(); + } + ppcMsync(); + ppcMbar(); + + if (wait_for_dram_init_complete() != 0) { + printf("dram init complete did not occur !!!\n"); + printf("denali_core_search_data_eye!!!\n"); + printf("wr_dqs_shift = %d - dll_dqs_delay_X = %d\n", + wr_dqs_shift, dll_dqs_delay_X); + hang(); + } + udelay(100); /* wait 100us to ensure init is really completed !!! */ + + /* write values */ + for (j=0; j<NUM_TRIES; j++) { + ram_pointer[j] = test[j]; + + /* clear any cache at ram location */ + __asm__("dcbf 0,%0": :"r" (&ram_pointer[j])); + } + + /* read values back */ + for (j=0; j<NUM_TRIES; j++) { + for (k=0; k<NUM_READS; k++) { + /* clear any cache at ram location */ + __asm__("dcbf 0,%0": :"r" (&ram_pointer[j])); + + if (ram_pointer[j] != test[j]) + break; + } + + /* read error */ + if (k != NUM_READS) + break; + } + + /* See if the dll_dqs_delay_X value passed.*/ + if (j < NUM_TRIES) { + /* Failed */ + passing_cases = 0; + /* break; */ + } else { + /* Passed */ + if (passing_cases == 0) + dll_dqs_delay_X_sw_val = dll_dqs_delay_X; + passing_cases++; + if (passing_cases >= max_passing_cases) { + max_passing_cases = passing_cases; + wr_dqs_shift_with_max_passing_cases = wr_dqs_shift; + dll_dqs_delay_X_start_window = dll_dqs_delay_X_sw_val; + dll_dqs_delay_X_end_window = dll_dqs_delay_X; + } + } + + /* -----------------------------------------------------------+ + * De-assert 'start' parameter. + * ----------------------------------------------------------*/ + mtdcr(ddrcfga, DDR0_02); + val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF; + mtdcr(ddrcfgd, val); + + } /* for (dll_dqs_delay_X=0; dll_dqs_delay_X<128; dll_dqs_delay_X++) */ + + } /* for (wr_dqs_shift=0; wr_dqs_shift<96; wr_dqs_shift++) */ + + /* -----------------------------------------------------------+ + * Largest passing window is now detected. + * ----------------------------------------------------------*/ + + /* Compute dll_dqs_delay_X value */ + dll_dqs_delay_X = (dll_dqs_delay_X_end_window + dll_dqs_delay_X_start_window) / 2; + wr_dqs_shift = wr_dqs_shift_with_max_passing_cases; + + debug("DQS calibration - Window detected:\n"); + debug("max_passing_cases = %d\n", max_passing_cases); + debug("wr_dqs_shift = %d\n", wr_dqs_shift); + debug("dll_dqs_delay_X = %d\n", dll_dqs_delay_X); + debug("dll_dqs_delay_X window = %d - %d\n", + dll_dqs_delay_X_start_window, dll_dqs_delay_X_end_window); + + /* -----------------------------------------------------------+ + * De-assert 'start' parameter. + * ----------------------------------------------------------*/ + mtdcr(ddrcfga, DDR0_02); + val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF; + mtdcr(ddrcfgd, val); + + /* -----------------------------------------------------------+ + * Set 'wr_dqs_shift' + * ----------------------------------------------------------*/ + mtdcr(ddrcfga, DDR0_09); + val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK) + | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift); + mtdcr(ddrcfgd, val); + debug("DDR0_09=0x%08lx\n", val); + + /* -----------------------------------------------------------+ + * Set 'dqs_out_shift' = wr_dqs_shift + 32 + * ----------------------------------------------------------*/ + dqs_out_shift = wr_dqs_shift + 32; + mtdcr(ddrcfga, DDR0_22); + val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK) + | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift); + mtdcr(ddrcfgd, val); + debug("DDR0_22=0x%08lx\n", val); + + /* -----------------------------------------------------------+ + * Set 'dll_dqs_delay_X'. + * ----------------------------------------------------------*/ + /* dll_dqs_delay_0 */ + mtdcr(ddrcfga, DDR0_17); + val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK) + | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X); + mtdcr(ddrcfgd, val); + debug("DDR0_17=0x%08lx\n", val); + + /* dll_dqs_delay_1 to dll_dqs_delay_4 */ + mtdcr(ddrcfga, DDR0_18); + val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK) + | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X) + | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X) + | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X) + | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X); + mtdcr(ddrcfgd, val); + debug("DDR0_18=0x%08lx\n", val); + + /* dll_dqs_delay_5 to dll_dqs_delay_8 */ + mtdcr(ddrcfga, DDR0_19); + val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK) + | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X) + | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X) + | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X) + | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X); + mtdcr(ddrcfgd, val); + debug("DDR0_19=0x%08lx\n", val); + + /* -----------------------------------------------------------+ + * Assert 'start' parameter. + * ----------------------------------------------------------*/ + mtdcr(ddrcfga, DDR0_02); + val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON; + mtdcr(ddrcfgd, val); + + ppcMsync(); + ppcMbar(); + + /* -----------------------------------------------------------+ + * Wait for the DCC master delay line to finish calibration + * ----------------------------------------------------------*/ + if (wait_for_dlllock() != 0) { + printf("dlllock did not occur !!!\n"); + hang(); + } + ppcMsync(); + ppcMbar(); + + if (wait_for_dram_init_complete() != 0) { + printf("dram init complete did not occur !!!\n"); + hang(); + } + udelay(100); /* wait 100us to ensure init is really completed !!! */ +} +#endif /* CONFIG_DDR_DATA_EYE */ + /************************************************************************* * * initdram -- 440EPx's DDR controller is a DENALI Core @@ -30,8 +379,6 @@ long int initdram (int board_type) { #if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) - volatile ulong val; - mtsdram(DDR0_02, 0x00000000); mtsdram(DDR0_00, 0x0000190A); @@ -64,14 +411,15 @@ long int initdram (int board_type) mtsdram(DDR0_44, 0x00000005); mtsdram(DDR0_02, 0x00000001); - /* - * Wait for DCC master delay line to finish calibration - */ - mfsdram(DDR0_17, val); - while (((val >> 8) & 0x000007f) == 0) { - mfsdram(DDR0_17, val); - } + wait_for_dlllock(); #endif /* #ifndef CONFIG_NAND_U_BOOT */ +#ifdef CONFIG_DDR_DATA_EYE + /* -----------------------------------------------------------+ + * Perform data eye search if requested. + * ----------------------------------------------------------*/ + denali_core_search_data_eye(CFG_MBYTES_SDRAM << 20); +#endif + return (CFG_MBYTES_SDRAM << 20); } diff --git a/board/amcc/sequoia/sdram.h b/board/amcc/sequoia/sdram.h new file mode 100644 index 000000000..7f847aa2a --- /dev/null +++ b/board/amcc/sequoia/sdram.h @@ -0,0 +1,505 @@ +/* + * (C) Copyright 2006 + * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com + * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com + * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com + * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com + * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SPD_SDRAM_DENALI_H_ +#define _SPD_SDRAM_DENALI_H_ + +#define ppcMsync sync +#define ppcMbar eieio + +/* General definitions */ +#define MAX_SPD_BYTE 128 /* highest SPD byte # to read */ +#define DENALI_REG_NUMBER 45 /* 45 Regs in PPC440EPx Denali Core */ +#define SUPPORTED_DIMMS_NB 7 /* Number of supported DIMM modules types */ +#define SDRAM_NONE 0 /* No DIMM detected in Slot */ +#define MAXRANKS 2 /* 2 ranks maximum */ + +/* Supported PLB Frequencies */ +#define PLB_FREQ_133MHZ 133333333 +#define PLB_FREQ_152MHZ 152000000 +#define PLB_FREQ_160MHZ 160000000 +#define PLB_FREQ_166MHZ 166666666 + +/* Denali Core Registers */ +#define SDRAM_DCR_BASE 0x10 + +#define DDR_DCR_BASE 0x10 +#define ddrcfga (DDR_DCR_BASE+0x0) /* DDR configuration address reg */ +#define ddrcfgd (DDR_DCR_BASE+0x1) /* DDR configuration data reg */ + +/*-----------------------------------------------------------------------------+ + | Values for ddrcfga register - indirect addressing of these regs + +-----------------------------------------------------------------------------*/ + +#define DDR0_00 0x00 +#define DDR0_00_INT_ACK_MASK 0x7F000000 /* Write only */ +#define DDR0_00_INT_ACK_ALL 0x7F000000 +#define DDR0_00_INT_ACK_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24) +#define DDR0_00_INT_ACK_DECODE(n) ((((unsigned long)(n))>>24)&0x7F) +/* Status */ +#define DDR0_00_INT_STATUS_MASK 0x00FF0000 /* Read only */ +/* Bit0. A single access outside the defined PHYSICAL memory space detected. */ +#define DDR0_00_INT_STATUS_BIT0 0x00010000 +/* Bit1. Multiple accesses outside the defined PHYSICAL memory space detected. */ +#define DDR0_00_INT_STATUS_BIT1 0x00020000 +/* Bit2. Single correctable ECC event detected */ +#define DDR0_00_INT_STATUS_BIT2 0x00040000 +/* Bit3. Multiple correctable ECC events detected. */ +#define DDR0_00_INT_STATUS_BIT3 0x00080000 +/* Bit4. Single uncorrectable ECC event detected. */ +#define DDR0_00_INT_STATUS_BIT4 0x00100000 +/* Bit5. Multiple uncorrectable ECC events detected. */ +#define DDR0_00_INT_STATUS_BIT5 0x00200000 +/* Bit6. DRAM initialization complete. */ +#define DDR0_00_INT_STATUS_BIT6 0x00400000 +/* Bit7. Logical OR of all lower bits. */ +#define DDR0_00_INT_STATUS_BIT7 0x00800000 + +#define DDR0_00_INT_STATUS_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16) +#define DDR0_00_INT_STATUS_DECODE(n) ((((unsigned long)(n))>>16)&0xFF) +#define DDR0_00_DLL_INCREMENT_MASK 0x00007F00 +#define DDR0_00_DLL_INCREMENT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_00_DLL_INCREMENT_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_00_DLL_START_POINT_MASK 0x0000007F +#define DDR0_00_DLL_START_POINT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_00_DLL_START_POINT_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + + +#define DDR0_01 0x01 +#define DDR0_01_PLB0_DB_CS_LOWER_MASK 0x1F000000 +#define DDR0_01_PLB0_DB_CS_LOWER_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24) +#define DDR0_01_PLB0_DB_CS_LOWER_DECODE(n) ((((unsigned long)(n))>>24)&0x1F) +#define DDR0_01_PLB0_DB_CS_UPPER_MASK 0x001F0000 +#define DDR0_01_PLB0_DB_CS_UPPER_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16) +#define DDR0_01_PLB0_DB_CS_UPPER_DECODE(n) ((((unsigned long)(n))>>16)&0x1F) +#define DDR0_01_OUT_OF_RANGE_TYPE_MASK 0x00000700 /* Read only */ +#define DDR0_01_OUT_OF_RANGE_TYPE_ENCODE(n) ((((unsigned long)(n))&0x7)<<8) +#define DDR0_01_OUT_OF_RANGE_TYPE_DECODE(n) ((((unsigned long)(n))>>8)&0x7) +#define DDR0_01_INT_MASK_MASK 0x000000FF +#define DDR0_01_INT_MASK_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0) +#define DDR0_01_INT_MASK_DECODE(n) ((((unsigned long)(n))>>0)&0xFF) +#define DDR0_01_INT_MASK_ALL_ON 0x000000FF +#define DDR0_01_INT_MASK_ALL_OFF 0x00000000 + +#define DDR0_02 0x02 +#define DDR0_02_MAX_CS_REG_MASK 0x02000000 /* Read only */ +#define DDR0_02_MAX_CS_REG_ENCODE(n) ((((unsigned long)(n))&0x2)<<24) +#define DDR0_02_MAX_CS_REG_DECODE(n) ((((unsigned long)(n))>>24)&0x2) +#define DDR0_02_MAX_COL_REG_MASK 0x000F0000 /* Read only */ +#define DDR0_02_MAX_COL_REG_ENCODE(n) ((((unsigned long)(n))&0xF)<<16) +#define DDR0_02_MAX_COL_REG_DECODE(n) ((((unsigned long)(n))>>16)&0xF) +#define DDR0_02_MAX_ROW_REG_MASK 0x00000F00 /* Read only */ +#define DDR0_02_MAX_ROW_REG_ENCODE(n) ((((unsigned long)(n))&0xF)<<8) +#define DDR0_02_MAX_ROW_REG_DECODE(n) ((((unsigned long)(n))>>8)&0xF) +#define DDR0_02_START_MASK 0x00000001 +#define DDR0_02_START_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_02_START_DECODE(n) ((((unsigned long)(n))>>0)&0x1) +#define DDR0_02_START_OFF 0x00000000 +#define DDR0_02_START_ON 0x00000001 + +#define DDR0_03 0x03 +#define DDR0_03_BSTLEN_MASK 0x07000000 +#define DDR0_03_BSTLEN_ENCODE(n) ((((unsigned long)(n))&0x7)<<24) +#define DDR0_03_BSTLEN_DECODE(n) ((((unsigned long)(n))>>24)&0x7) +#define DDR0_03_CASLAT_MASK 0x00070000 +#define DDR0_03_CASLAT_ENCODE(n) ((((unsigned long)(n))&0x7)<<16) +#define DDR0_03_CASLAT_DECODE(n) ((((unsigned long)(n))>>16)&0x7) +#define DDR0_03_CASLAT_LIN_MASK 0x00000F00 +#define DDR0_03_CASLAT_LIN_ENCODE(n) ((((unsigned long)(n))&0xF)<<8) +#define DDR0_03_CASLAT_LIN_DECODE(n) ((((unsigned long)(n))>>8)&0xF) +#define DDR0_03_INITAREF_MASK 0x0000000F +#define DDR0_03_INITAREF_ENCODE(n) ((((unsigned long)(n))&0xF)<<0) +#define DDR0_03_INITAREF_DECODE(n) ((((unsigned long)(n))>>0)&0xF) + +#define DDR0_04 0x04 +#define DDR0_04_TRC_MASK 0x1F000000 +#define DDR0_04_TRC_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24) +#define DDR0_04_TRC_DECODE(n) ((((unsigned long)(n))>>24)&0x1F) +#define DDR0_04_TRRD_MASK 0x00070000 +#define DDR0_04_TRRD_ENCODE(n) ((((unsigned long)(n))&0x7)<<16) +#define DDR0_04_TRRD_DECODE(n) ((((unsigned long)(n))>>16)&0x7) +#define DDR0_04_TRTP_MASK 0x00000700 +#define DDR0_04_TRTP_ENCODE(n) ((((unsigned long)(n))&0x7)<<8) +#define DDR0_04_TRTP_DECODE(n) ((((unsigned long)(n))>>8)&0x7) + +#define DDR0_05 0x05 +#define DDR0_05_TMRD_MASK 0x1F000000 +#define DDR0_05_TMRD_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24) +#define DDR0_05_TMRD_DECODE(n) ((((unsigned long)(n))>>24)&0x1F) +#define DDR0_05_TEMRS_MASK 0x00070000 +#define DDR0_05_TEMRS_ENCODE(n) ((((unsigned long)(n))&0x7)<<16) +#define DDR0_05_TEMRS_DECODE(n) ((((unsigned long)(n))>>16)&0x7) +#define DDR0_05_TRP_MASK 0x00000F00 +#define DDR0_05_TRP_ENCODE(n) ((((unsigned long)(n))&0xF)<<8) +#define DDR0_05_TRP_DECODE(n) ((((unsigned long)(n))>>8)&0xF) +#define DDR0_05_TRAS_MIN_MASK 0x000000FF +#define DDR0_05_TRAS_MIN_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0) +#define DDR0_05_TRAS_MIN_DECODE(n) ((((unsigned long)(n))>>0)&0xFF) + +#define DDR0_06 0x06 +#define DDR0_06_WRITEINTERP_MASK 0x01000000 +#define DDR0_06_WRITEINTERP_ENCODE(n) ((((unsigned long)(n))&0x1)<<24) +#define DDR0_06_WRITEINTERP_DECODE(n) ((((unsigned long)(n))>>24)&0x1) +#define DDR0_06_TWTR_MASK 0x00070000 +#define DDR0_06_TWTR_ENCODE(n) ((((unsigned long)(n))&0x7)<<16) +#define DDR0_06_TWTR_DECODE(n) ((((unsigned long)(n))>>16)&0x7) +#define DDR0_06_TDLL_MASK 0x0000FF00 +#define DDR0_06_TDLL_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8) +#define DDR0_06_TDLL_DECODE(n) ((((unsigned long)(n))>>8)&0xFF) +#define DDR0_06_TRFC_MASK 0x0000007F +#define DDR0_06_TRFC_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_06_TRFC_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_07 0x07 +#define DDR0_07_NO_CMD_INIT_MASK 0x01000000 +#define DDR0_07_NO_CMD_INIT_ENCODE(n) ((((unsigned long)(n))&0x1)<<24) +#define DDR0_07_NO_CMD_INIT_DECODE(n) ((((unsigned long)(n))>>24)&0x1) +#define DDR0_07_TFAW_MASK 0x001F0000 +#define DDR0_07_TFAW_ENCODE(n) ((((unsigned long)(n))&0x1F)<<16) +#define DDR0_07_TFAW_DECODE(n) ((((unsigned long)(n))>>16)&0x1F) +#define DDR0_07_AUTO_REFRESH_MODE_MASK 0x00000100 +#define DDR0_07_AUTO_REFRESH_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<8) +#define DDR0_07_AUTO_REFRESH_MODE_DECODE(n) ((((unsigned long)(n))>>8)&0x1) +#define DDR0_07_AREFRESH_MASK 0x00000001 +#define DDR0_07_AREFRESH_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_07_AREFRESH_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_08 0x08 +#define DDR0_08_WRLAT_MASK 0x07000000 +#define DDR0_08_WRLAT_ENCODE(n) ((((unsigned long)(n))&0x7)<<24) +#define DDR0_08_WRLAT_DECODE(n) ((((unsigned long)(n))>>24)&0x7) +#define DDR0_08_TCPD_MASK 0x00FF0000 +#define DDR0_08_TCPD_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16) +#define DDR0_08_TCPD_DECODE(n) ((((unsigned long)(n))>>16)&0xFF) +#define DDR0_08_DQS_N_EN_MASK 0x00000100 +#define DDR0_08_DQS_N_EN_ENCODE(n) ((((unsigned long)(n))&0x1)<<8) +#define DDR0_08_DQS_N_EN_DECODE(n) ((((unsigned long)(n))>>8)&0x1) +#define DDR0_08_DDRII_SDRAM_MODE_MASK 0x00000001 +#define DDR0_08_DDRII_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_08_DDRII_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_09 0x09 +#define DDR0_09_OCD_ADJUST_PDN_CS_0_MASK 0x1F000000 +#define DDR0_09_OCD_ADJUST_PDN_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<24) +#define DDR0_09_OCD_ADJUST_PDN_CS_0_DECODE(n) ((((unsigned long)(n))>>24)&0x1F) +#define DDR0_09_RTT_0_MASK 0x00030000 +#define DDR0_09_RTT_0_ENCODE(n) ((((unsigned long)(n))&0x3)<<16) +#define DDR0_09_RTT_0_DECODE(n) ((((unsigned long)(n))>>16)&0x3) +#define DDR0_09_WR_DQS_SHIFT_BYPASS_MASK 0x00007F00 +#define DDR0_09_WR_DQS_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_09_WR_DQS_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_09_WR_DQS_SHIFT_MASK 0x0000007F +#define DDR0_09_WR_DQS_SHIFT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_09_WR_DQS_SHIFT_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_10 0x0A +#define DDR0_10_WRITE_MODEREG_MASK 0x00010000 /* Write only */ +#define DDR0_10_WRITE_MODEREG_ENCODE(n) ((((unsigned long)(n))&0x1)<<16) +#define DDR0_10_WRITE_MODEREG_DECODE(n) ((((unsigned long)(n))>>16)&0x1) +#define DDR0_10_CS_MAP_MASK 0x00000300 +#define DDR0_10_CS_MAP_NO_MEM 0x00000000 +#define DDR0_10_CS_MAP_RANK0_INSTALLED 0x00000100 +#define DDR0_10_CS_MAP_RANK1_INSTALLED 0x00000200 +#define DDR0_10_CS_MAP_ENCODE(n) ((((unsigned long)(n))&0x3)<<8) +#define DDR0_10_CS_MAP_DECODE(n) ((((unsigned long)(n))>>8)&0x3) +#define DDR0_10_OCD_ADJUST_PUP_CS_0_MASK 0x0000001F +#define DDR0_10_OCD_ADJUST_PUP_CS_0_ENCODE(n) ((((unsigned long)(n))&0x1F)<<0) +#define DDR0_10_OCD_ADJUST_PUP_CS_0_DECODE(n) ((((unsigned long)(n))>>0)&0x1F) + +#define DDR0_11 0x0B +#define DDR0_11_SREFRESH_MASK 0x01000000 +#define DDR0_11_SREFRESH_ENCODE(n) ((((unsigned long)(n))&0x1)<<24) +#define DDR0_11_SREFRESH_DECODE(n) ((((unsigned long)(n))>>24)&0x1F) +#define DDR0_11_TXSNR_MASK 0x00FF0000 +#define DDR0_11_TXSNR_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16) +#define DDR0_11_TXSNR_DECODE(n) ((((unsigned long)(n))>>16)&0xFF) +#define DDR0_11_TXSR_MASK 0x0000FF00 +#define DDR0_11_TXSR_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8) +#define DDR0_11_TXSR_DECODE(n) ((((unsigned long)(n))>>8)&0xFF) + +#define DDR0_12 0x0C +#define DDR0_12_TCKE_MASK 0x0000007 +#define DDR0_12_TCKE_ENCODE(n) ((((unsigned long)(n))&0x7)<<0) +#define DDR0_12_TCKE_DECODE(n) ((((unsigned long)(n))>>0)&0x7) + +#define DDR0_13 0x0D + +#define DDR0_14 0x0E +#define DDR0_14_DLL_BYPASS_MODE_MASK 0x01000000 +#define DDR0_14_DLL_BYPASS_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<24) +#define DDR0_14_DLL_BYPASS_MODE_DECODE(n) ((((unsigned long)(n))>>24)&0x1) +#define DDR0_14_REDUC_MASK 0x00010000 +#define DDR0_14_REDUC_64BITS 0x00000000 +#define DDR0_14_REDUC_32BITS 0x00010000 +#define DDR0_14_REDUC_ENCODE(n) ((((unsigned long)(n))&0x1)<<16) +#define DDR0_14_REDUC_DECODE(n) ((((unsigned long)(n))>>16)&0x1) +#define DDR0_14_REG_DIMM_ENABLE_MASK 0x00000100 +#define DDR0_14_REG_DIMM_ENABLE_ENCODE(n) ((((unsigned long)(n))&0x1)<<8) +#define DDR0_14_REG_DIMM_ENABLE_DECODE(n) ((((unsigned long)(n))>>8)&0x1) + +#define DDR0_15 0x0F + +#define DDR0_16 0x10 + +#define DDR0_17 0x11 +#define DDR0_17_DLL_DQS_DELAY_0_MASK 0x7F000000 +#define DDR0_17_DLL_DQS_DELAY_0_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24) +#define DDR0_17_DLL_DQS_DELAY_0_DECODE(n) ((((unsigned long)(n))>>24)&0x7F) +#define DDR0_17_DLLLOCKREG_MASK 0x00010000 /* Read only */ +#define DDR0_17_DLLLOCKREG_LOCKED 0x00010000 +#define DDR0_17_DLLLOCKREG_UNLOCKED 0x00000000 +#define DDR0_17_DLLLOCKREG_ENCODE(n) ((((unsigned long)(n))&0x1)<<16) +#define DDR0_17_DLLLOCKREG_DECODE(n) ((((unsigned long)(n))>>16)&0x1) +#define DDR0_17_DLL_LOCK_MASK 0x00007F00 /* Read only */ +#define DDR0_17_DLL_LOCK_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_17_DLL_LOCK_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) + +#define DDR0_18 0x12 +#define DDR0_18_DLL_DQS_DELAY_X_MASK 0x7F7F7F7F +#define DDR0_18_DLL_DQS_DELAY_4_MASK 0x7F000000 +#define DDR0_18_DLL_DQS_DELAY_4_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24) +#define DDR0_18_DLL_DQS_DELAY_4_DECODE(n) ((((unsigned long)(n))>>24)&0x7F) +#define DDR0_18_DLL_DQS_DELAY_3_MASK 0x007F0000 +#define DDR0_18_DLL_DQS_DELAY_3_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16) +#define DDR0_18_DLL_DQS_DELAY_3_DECODE(n) ((((unsigned long)(n))>>16)&0x7F) +#define DDR0_18_DLL_DQS_DELAY_2_MASK 0x00007F00 +#define DDR0_18_DLL_DQS_DELAY_2_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_18_DLL_DQS_DELAY_2_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_18_DLL_DQS_DELAY_1_MASK 0x0000007F +#define DDR0_18_DLL_DQS_DELAY_1_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_18_DLL_DQS_DELAY_1_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_19 0x13 +#define DDR0_19_DLL_DQS_DELAY_X_MASK 0x7F7F7F7F +#define DDR0_19_DLL_DQS_DELAY_8_MASK 0x7F000000 +#define DDR0_19_DLL_DQS_DELAY_8_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24) +#define DDR0_19_DLL_DQS_DELAY_8_DECODE(n) ((((unsigned long)(n))>>24)&0x7F) +#define DDR0_19_DLL_DQS_DELAY_7_MASK 0x007F0000 +#define DDR0_19_DLL_DQS_DELAY_7_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16) +#define DDR0_19_DLL_DQS_DELAY_7_DECODE(n) ((((unsigned long)(n))>>16)&0x7F) +#define DDR0_19_DLL_DQS_DELAY_6_MASK 0x00007F00 +#define DDR0_19_DLL_DQS_DELAY_6_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_19_DLL_DQS_DELAY_6_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_19_DLL_DQS_DELAY_5_MASK 0x0000007F +#define DDR0_19_DLL_DQS_DELAY_5_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_19_DLL_DQS_DELAY_5_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_20 0x14 +#define DDR0_20_DLL_DQS_BYPASS_3_MASK 0x7F000000 +#define DDR0_20_DLL_DQS_BYPASS_3_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24) +#define DDR0_20_DLL_DQS_BYPASS_3_DECODE(n) ((((unsigned long)(n))>>24)&0x7F) +#define DDR0_20_DLL_DQS_BYPASS_2_MASK 0x007F0000 +#define DDR0_20_DLL_DQS_BYPASS_2_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16) +#define DDR0_20_DLL_DQS_BYPASS_2_DECODE(n) ((((unsigned long)(n))>>16)&0x7F) +#define DDR0_20_DLL_DQS_BYPASS_1_MASK 0x00007F00 +#define DDR0_20_DLL_DQS_BYPASS_1_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_20_DLL_DQS_BYPASS_1_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_20_DLL_DQS_BYPASS_0_MASK 0x0000007F +#define DDR0_20_DLL_DQS_BYPASS_0_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_20_DLL_DQS_BYPASS_0_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_21 0x15 +#define DDR0_21_DLL_DQS_BYPASS_7_MASK 0x7F000000 +#define DDR0_21_DLL_DQS_BYPASS_7_ENCODE(n) ((((unsigned long)(n))&0x7F)<<24) +#define DDR0_21_DLL_DQS_BYPASS_7_DECODE(n) ((((unsigned long)(n))>>24)&0x7F) +#define DDR0_21_DLL_DQS_BYPASS_6_MASK 0x007F0000 +#define DDR0_21_DLL_DQS_BYPASS_6_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16) +#define DDR0_21_DLL_DQS_BYPASS_6_DECODE(n) ((((unsigned long)(n))>>16)&0x7F) +#define DDR0_21_DLL_DQS_BYPASS_5_MASK 0x00007F00 +#define DDR0_21_DLL_DQS_BYPASS_5_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_21_DLL_DQS_BYPASS_5_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_21_DLL_DQS_BYPASS_4_MASK 0x0000007F +#define DDR0_21_DLL_DQS_BYPASS_4_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_21_DLL_DQS_BYPASS_4_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + +#define DDR0_22 0x16 +/* ECC */ +#define DDR0_22_CTRL_RAW_MASK 0x03000000 +#define DDR0_22_CTRL_RAW_ECC_DISABLE 0x00000000 /* ECC not being used */ +#define DDR0_22_CTRL_RAW_ECC_CHECK_ONLY 0x01000000 /* ECC checking is on, but no attempts to correct*/ +#define DDR0_22_CTRL_RAW_NO_ECC_RAM 0x02000000 /* No ECC RAM storage available */ +#define DDR0_22_CTRL_RAW_ECC_ENABLE 0x03000000 /* ECC checking and correcting on */ +#define DDR0_22_CTRL_RAW_ENCODE(n) ((((unsigned long)(n))&0x3)<<24) +#define DDR0_22_CTRL_RAW_DECODE(n) ((((unsigned long)(n))>>24)&0x3) + +#define DDR0_22_DQS_OUT_SHIFT_BYPASS_MASK 0x007F0000 +#define DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(n) ((((unsigned long)(n))&0x7F)<<16) +#define DDR0_22_DQS_OUT_SHIFT_BYPASS_DECODE(n) ((((unsigned long)(n))>>16)&0x7F) +#define DDR0_22_DQS_OUT_SHIFT_MASK 0x00007F00 +#define DDR0_22_DQS_OUT_SHIFT_ENCODE(n) ((((unsigned long)(n))&0x7F)<<8) +#define DDR0_22_DQS_OUT_SHIFT_DECODE(n) ((((unsigned long)(n))>>8)&0x7F) +#define DDR0_22_DLL_DQS_BYPASS_8_MASK 0x0000007F +#define DDR0_22_DLL_DQS_BYPASS_8_ENCODE(n) ((((unsigned long)(n))&0x7F)<<0) +#define DDR0_22_DLL_DQS_BYPASS_8_DECODE(n) ((((unsigned long)(n))>>0)&0x7F) + + +#define DDR0_23 0x17 +#define DDR0_23_ODT_RD_MAP_CS0_MASK 0x03000000 +#define DDR0_23_ODT_RD_MAP_CS0_ENCODE(n) ((((unsigned long)(n))&0x3)<<24) +#define DDR0_23_ODT_RD_MAP_CS0_DECODE(n) ((((unsigned long)(n))>>24)&0x3) +#define DDR0_23_ECC_C_SYND_MASK 0x00FF0000 /* Read only */ +#define DDR0_23_ECC_C_SYND_ENCODE(n) ((((unsigned long)(n))&0xFF)<<16) +#define DDR0_23_ECC_C_SYND_DECODE(n) ((((unsigned long)(n))>>16)&0xFF) +#define DDR0_23_ECC_U_SYND_MASK 0x0000FF00 /* Read only */ +#define DDR0_23_ECC_U_SYND_ENCODE(n) ((((unsigned long)(n))&0xFF)<<8) +#define DDR0_23_ECC_U_SYND_DECODE(n) ((((unsigned long)(n))>>8)&0xFF) +#define DDR0_23_FWC_MASK 0x00000001 /* Write only */ +#define DDR0_23_FWC_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_23_FWC_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_24 0x18 +#define DDR0_24_RTT_PAD_TERMINATION_MASK 0x03000000 +#define DDR0_24_RTT_PAD_TERMINATION_ENCODE(n) ((((unsigned long)(n))&0x3)<<24) +#define DDR0_24_RTT_PAD_TERMINATION_DECODE(n) ((((unsigned long)(n))>>24)&0x3) +#define DDR0_24_ODT_WR_MAP_CS1_MASK 0x00030000 +#define DDR0_24_ODT_WR_MAP_CS1_ENCODE(n) ((((unsigned long)(n))&0x3)<<16) +#define DDR0_24_ODT_WR_MAP_CS1_DECODE(n) ((((unsigned long)(n))>>16)&0x3) +#define DDR0_24_ODT_RD_MAP_CS1_MASK 0x00000300 +#define DDR0_24_ODT_RD_MAP_CS1_ENCODE(n) ((((unsigned long)(n))&0x3)<<8) +#define DDR0_24_ODT_RD_MAP_CS1_DECODE(n) ((((unsigned long)(n))>>8)&0x3) +#define DDR0_24_ODT_WR_MAP_CS0_MASK 0x00000003 +#define DDR0_24_ODT_WR_MAP_CS0_ENCODE(n) ((((unsigned long)(n))&0x3)<<0) +#define DDR0_24_ODT_WR_MAP_CS0_DECODE(n) ((((unsigned long)(n))>>0)&0x3) + +#define DDR0_25 0x19 +#define DDR0_25_VERSION_MASK 0xFFFF0000 /* Read only */ +#define DDR0_25_VERSION_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<16) +#define DDR0_25_VERSION_DECODE(n) ((((unsigned long)(n))>>16)&0xFFFF) +#define DDR0_25_OUT_OF_RANGE_LENGTH_MASK 0x000003FF /* Read only */ +#define DDR0_25_OUT_OF_RANGE_LENGTH_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0) +#define DDR0_25_OUT_OF_RANGE_LENGTH_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF) + +#define DDR0_26 0x1A +#define DDR0_26_TRAS_MAX_MASK 0xFFFF0000 +#define DDR0_26_TRAS_MAX_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<16) +#define DDR0_26_TRAS_MAX_DECODE(n) ((((unsigned long)(n))>>16)&0xFFFF) +#define DDR0_26_TREF_MASK 0x00003FFF +#define DDR0_26_TREF_ENCODE(n) ((((unsigned long)(n))&0x3FF)<<0) +#define DDR0_26_TREF_DECODE(n) ((((unsigned long)(n))>>0)&0x3FF) + +#define DDR0_27 0x1B +#define DDR0_27_EMRS_DATA_MASK 0x3FFF0000 +#define DDR0_27_EMRS_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<16) +#define DDR0_27_EMRS_DATA_DECODE(n) ((((unsigned long)(n))>>16)&0x3FFF) +#define DDR0_27_TINIT_MASK 0x0000FFFF +#define DDR0_27_TINIT_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<0) +#define DDR0_27_TINIT_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFF) + +#define DDR0_28 0x1C +#define DDR0_28_EMRS3_DATA_MASK 0x3FFF0000 +#define DDR0_28_EMRS3_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<16) +#define DDR0_28_EMRS3_DATA_DECODE(n) ((((unsigned long)(n))>>16)&0x3FFF) +#define DDR0_28_EMRS2_DATA_MASK 0x00003FFF +#define DDR0_28_EMRS2_DATA_ENCODE(n) ((((unsigned long)(n))&0x3FFF)<<0) +#define DDR0_28_EMRS2_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0x3FFF) + +#define DDR0_29 0x1D + +#define DDR0_30 0x1E + +#define DDR0_31 0x1F +#define DDR0_31_XOR_CHECK_BITS_MASK 0x0000FFFF +#define DDR0_31_XOR_CHECK_BITS_ENCODE(n) ((((unsigned long)(n))&0xFFFF)<<0) +#define DDR0_31_XOR_CHECK_BITS_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFF) + +#define DDR0_32 0x20 +#define DDR0_32_OUT_OF_RANGE_ADDR_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_32_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_32_OUT_OF_RANGE_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_33 0x21 +#define DDR0_33_OUT_OF_RANGE_ADDR_MASK 0x00000001 /* Read only */ +#define DDR0_33_OUT_OF_RANGE_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_33_OUT_OF_RANGE_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_34 0x22 +#define DDR0_34_ECC_U_ADDR_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_34_ECC_U_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_34_ECC_U_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_35 0x23 +#define DDR0_35_ECC_U_ADDR_MASK 0x00000001 /* Read only */ +#define DDR0_35_ECC_U_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_35_ECC_U_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_36 0x24 +#define DDR0_36_ECC_U_DATA_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_36_ECC_U_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_36_ECC_U_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_37 0x25 +#define DDR0_37_ECC_U_DATA_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_37_ECC_U_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_37_ECC_U_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_38 0x26 +#define DDR0_38_ECC_C_ADDR_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_38_ECC_C_ADDR_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_38_ECC_C_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_39 0x27 +#define DDR0_39_ECC_C_ADDR_MASK 0x00000001 /* Read only */ +#define DDR0_39_ECC_C_ADDR_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_39_ECC_C_ADDR_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_40 0x28 +#define DDR0_40_ECC_C_DATA_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_40_ECC_C_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_40_ECC_C_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_41 0x29 +#define DDR0_41_ECC_C_DATA_MASK 0xFFFFFFFF /* Read only */ +#define DDR0_41_ECC_C_DATA_ENCODE(n) ((((unsigned long)(n))&0xFFFFFFFF)<<0) +#define DDR0_41_ECC_C_DATA_DECODE(n) ((((unsigned long)(n))>>0)&0xFFFFFFFF) + +#define DDR0_42 0x2A +#define DDR0_42_ADDR_PINS_MASK 0x07000000 +#define DDR0_42_ADDR_PINS_ENCODE(n) ((((unsigned long)(n))&0x7)<<24) +#define DDR0_42_ADDR_PINS_DECODE(n) ((((unsigned long)(n))>>24)&0x7) +#define DDR0_42_CASLAT_LIN_GATE_MASK 0x0000000F +#define DDR0_42_CASLAT_LIN_GATE_ENCODE(n) ((((unsigned long)(n))&0xF)<<0) +#define DDR0_42_CASLAT_LIN_GATE_DECODE(n) ((((unsigned long)(n))>>0)&0xF) + +#define DDR0_43 0x2B +#define DDR0_43_TWR_MASK 0x07000000 +#define DDR0_43_TWR_ENCODE(n) ((((unsigned long)(n))&0x7)<<24) +#define DDR0_43_TWR_DECODE(n) ((((unsigned long)(n))>>24)&0x7) +#define DDR0_43_APREBIT_MASK 0x000F0000 +#define DDR0_43_APREBIT_ENCODE(n) ((((unsigned long)(n))&0xF)<<16) +#define DDR0_43_APREBIT_DECODE(n) ((((unsigned long)(n))>>16)&0xF) +#define DDR0_43_COLUMN_SIZE_MASK 0x00000700 +#define DDR0_43_COLUMN_SIZE_ENCODE(n) ((((unsigned long)(n))&0x7)<<8) +#define DDR0_43_COLUMN_SIZE_DECODE(n) ((((unsigned long)(n))>>8)&0x7) +#define DDR0_43_EIGHT_BANK_MODE_MASK 0x00000001 +#define DDR0_43_EIGHT_BANK_MODE_8_BANKS 0x00000001 +#define DDR0_43_EIGHT_BANK_MODE_4_BANKS 0x00000000 +#define DDR0_43_EIGHT_BANK_MODE_ENCODE(n) ((((unsigned long)(n))&0x1)<<0) +#define DDR0_43_EIGHT_BANK_MODE_DECODE(n) ((((unsigned long)(n))>>0)&0x1) + +#define DDR0_44 0x2C +#define DDR0_44_TRCD_MASK 0x000000FF +#define DDR0_44_TRCD_ENCODE(n) ((((unsigned long)(n))&0xFF)<<0) +#define DDR0_44_TRCD_DECODE(n) ((((unsigned long)(n))>>0)&0xFF) + +#endif /* _SPD_SDRAM_DENALI_H_ */ diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c index ff211aef2..b2b82c759 100644 --- a/board/amcc/sequoia/sequoia.c +++ b/board/amcc/sequoia/sequoia.c @@ -35,9 +35,9 @@ ulong flash_get_size (ulong base, int banknum); int board_early_init_f(void) { - unsigned long sdr0_cust0; - unsigned long sdr0_pfc1, sdr0_pfc2; - register uint reg; + u32 sdr0_cust0; + u32 sdr0_pfc1, sdr0_pfc2; + u32 reg; mtdcr(ebccfga, xbcfg); mtdcr(ebccfgd, 0xb8400000); @@ -142,6 +142,7 @@ int misc_init_r(void) { uint pbcr; int size_val = 0; + u32 reg; #ifdef CONFIG_440EPX unsigned long usb2d0cr = 0; unsigned long usb2phy0cr, usb2h0cr = 0; @@ -335,18 +336,33 @@ int misc_init_r(void) } #endif /* CONFIG_440EPX */ + /* + * Clear PLB4A0_ACR[WRP] + * This fix will make the MAL burst disabling patch for the Linux + * EMAC driver obsolete. + */ + reg = mfdcr(plb4_acr) & ~PLB4_ACR_WRP; + mtdcr(plb4_acr, reg); + return 0; } int checkboard(void) { char *s = getenv("serial#"); + u8 rev; + u8 val; #ifdef CONFIG_440EPX printf("Board: Sequoia - AMCC PPC440EPx Evaluation Board"); #else printf("Board: Rainier - AMCC PPC440GRx Evaluation Board"); #endif + + rev = *(u8 *)(CFG_CPLD + 0); + val = *(u8 *)(CFG_CPLD + 5) & 0x01; + printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33); + if (s != NULL) { puts(", serial# "); puts(s); diff --git a/board/amcc/taishan/Makefile b/board/amcc/taishan/Makefile new file mode 100644 index 000000000..462af001b --- /dev/null +++ b/board/amcc/taishan/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2007 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o lcd.o update.o showinfo.o +SOBJS = init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/amcc/taishan/config.mk b/board/amcc/taishan/config.mk new file mode 100644 index 000000000..4eefff21d --- /dev/null +++ b/board/amcc/taishan/config.mk @@ -0,0 +1,44 @@ +# +# (C) Copyright 2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# AMCC 440GX Reference Platform (Taishan) board +# + +#TEXT_BASE = 0xFFFE0000 + +ifeq ($(ramsym),1) +TEXT_BASE = 0x07FD0000 +else +TEXT_BASE = 0xFFFC0000 +endif + +PLATFORM_CPPFLAGS += -DCONFIG_440=1 + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif + +ifeq ($(dbcr),1) +PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000 +endif diff --git a/board/amcc/taishan/init.S b/board/amcc/taishan/init.S new file mode 100644 index 000000000..8db043ba1 --- /dev/null +++ b/board/amcc/taishan/init.S @@ -0,0 +1,97 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <ppc_asm.tmpl> +#include <config.h> + +/* General */ +#define TLB_VALID 0x00000200 +#define _256M 0x10000000 + +/* Supported page sizes */ + +#define SZ_1K 0x00000000 +#define SZ_4K 0x00000010 +#define SZ_16K 0x00000020 +#define SZ_64K 0x00000030 +#define SZ_256K 0x00000040 +#define SZ_1M 0x00000050 +#define SZ_8M 0x00000060 +#define SZ_16M 0x00000070 +#define SZ_256M 0x00000090 + +/* Storage attributes */ +#define SA_W 0x00000800 /* Write-through */ +#define SA_I 0x00000400 /* Caching inhibited */ +#define SA_M 0x00000200 /* Memory coherence */ +#define SA_G 0x00000100 /* Guarded */ +#define SA_E 0x00000080 /* Endian */ + +/* Access control */ +#define AC_X 0x00000024 /* Execute */ +#define AC_W 0x00000012 /* Write */ +#define AC_R 0x00000009 /* Read */ + +/* Some handy macros */ + +#define EPN(e) ((e) & 0xfffffc00) +#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) ) +#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) ) +#define TLB2(a) ( (a)&0x00000fbf ) + +#define tlbtab_start\ + mflr r1 ;\ + bl 0f ; + +#define tlbtab_end\ + .long 0, 0, 0 ; \ +0: mflr r0 ; \ + mtlr r1 ; \ + blr ; + +#define tlbentry(epn,sz,rpn,erpn,attr)\ + .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr) + +/************************************************************************** + * TLB TABLE + * + * This table is used by the cpu boot code to setup the initial tlb + * entries. Rather than make broad assumptions in the cpu source tree, + * this table lets each board set things up however they like. + * + * Pointer to the table is returned in r1 + * + *************************************************************************/ + + .section .bootpg,"ax" + .globl tlbtab + +tlbtab: + tlbtab_start + tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I) + tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I) + tlbentry( CFG_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X ) + tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) + tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I ) + tlbtab_end diff --git a/board/amcc/taishan/lcd.c b/board/amcc/taishan/lcd.c new file mode 100644 index 000000000..8d2dce35c --- /dev/null +++ b/board/amcc/taishan/lcd.c @@ -0,0 +1,380 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <command.h> +#include <i2c.h> +#include <miiphy.h> + +#ifdef CONFIG_TAISHAN + +#define LCD_DELAY_NORMAL_US 100 +#define LCD_DELAY_NORMAL_MS 2 +#define LCD_CMD_ADDR ((volatile char *)(CFG_EBC2_LCM_BASE)) +#define LCD_DATA_ADDR ((volatile char *)(CFG_EBC2_LCM_BASE+1)) +#define LCD_BLK_CTRL ((volatile char *)(CFG_EBC1_FPGA_BASE+0x2)) + +#define mdelay(t) ({unsigned long msec=(t); while (msec--) { udelay(1000);}}) + +static int g_lcd_init_b = 0; +static char *amcc_logo = " AMCC TAISHAN 440GX EvalBoard"; +static char addr_flag = 0x80; + +static void lcd_bl_ctrl(char val) +{ + char cpld_val; + + cpld_val = *LCD_BLK_CTRL; + *LCD_BLK_CTRL = val | cpld_val; +} + +static void lcd_putc(char val) +{ + int i = 100; + char addr; + + while (i--) { + if ((*LCD_CMD_ADDR & 0x80) != 0x80) { /*BF = 1 ? */ + udelay(LCD_DELAY_NORMAL_US); + break; + } + udelay(LCD_DELAY_NORMAL_US); + } + + if (*LCD_CMD_ADDR & 0x80) { + printf("LCD is busy\n"); + return; + } + + addr = *LCD_CMD_ADDR; + udelay(LCD_DELAY_NORMAL_US); + if ((addr != 0) && (addr % 0x10 == 0)) { + addr_flag ^= 0x40; + *LCD_CMD_ADDR = addr_flag; + } + + udelay(LCD_DELAY_NORMAL_US); + *LCD_DATA_ADDR = val; + udelay(LCD_DELAY_NORMAL_US); +} + +static void lcd_puts(char *s) +{ + char *p = s; + int i = 100; + + while (i--) { + if ((*LCD_CMD_ADDR & 0x80) != 0x80) { /*BF = 1 ? */ + udelay(LCD_DELAY_NORMAL_US); + break; + } + udelay(LCD_DELAY_NORMAL_US); + } + + if (*LCD_CMD_ADDR & 0x80) { + printf("LCD is busy\n"); + return; + } + + while (*p) + lcd_putc(*p++); +} + +static void lcd_put_logo(void) +{ + int i = 100; + char *p = amcc_logo; + + while (i--) { + if ((*LCD_CMD_ADDR & 0x80) != 0x80) { /*BF = 1 ? */ + udelay(LCD_DELAY_NORMAL_US); + break; + } + udelay(LCD_DELAY_NORMAL_US); + } + + if (*LCD_CMD_ADDR & 0x80) { + printf("LCD is busy\n"); + return; + } + + *LCD_CMD_ADDR = 0x80; + while (*p) + lcd_putc(*p++); +} + +int lcd_init(void) +{ + if (g_lcd_init_b == 0) { + puts("LCD: "); + mdelay(100); /* Waiting for the LCD initialize */ + + *LCD_CMD_ADDR = 0x38; /*set function:8-bit,2-line,5x7 font type */ + udelay(LCD_DELAY_NORMAL_US); + + *LCD_CMD_ADDR = 0x0f; /*set display on,cursor on,blink on */ + udelay(LCD_DELAY_NORMAL_US); + + *LCD_CMD_ADDR = 0x01; /*display clear */ + mdelay(LCD_DELAY_NORMAL_MS); + + *LCD_CMD_ADDR = 0x06; /*set entry */ + udelay(LCD_DELAY_NORMAL_US); + + lcd_bl_ctrl(0x02); + lcd_put_logo(); + + puts(" ready\n"); + g_lcd_init_b = 1; + } + + return 0; +} + +static int do_lcd_test(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + lcd_init(); + return 0; +} + +static int do_lcd_clear(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + *LCD_CMD_ADDR = 0x01; + mdelay(LCD_DELAY_NORMAL_MS); + return 0; +} +static int do_lcd_puts(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + if (argc < 2) { + printf("%s", cmdtp->usage); + return 1; + } + lcd_puts(argv[1]); + return 0; +} +static int do_lcd_putc(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + if (argc < 2) { + printf("%s", cmdtp->usage); + return 1; + } + lcd_putc((char)argv[1][0]); + return 0; +} +static int do_lcd_cur(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + ulong count; + ulong dir; + char cur_addr; + + if (argc < 3) { + printf("%s", cmdtp->usage); + return 1; + } + + count = simple_strtoul(argv[1], NULL, 16); + if (count > 31) { + printf("unable to shift > 0x20\n"); + count = 0; + } + + dir = simple_strtoul(argv[2], NULL, 16); + cur_addr = *LCD_CMD_ADDR; + udelay(LCD_DELAY_NORMAL_US); + if (dir == 0x0) { + if (addr_flag == 0x80) { + if (count >= (cur_addr & 0xf)) { + *LCD_CMD_ADDR = 0x80; + udelay(LCD_DELAY_NORMAL_US); + count = 0; + } + } else { + if (count >= ((cur_addr & 0x0f) + 0x0f)) { + *LCD_CMD_ADDR = 0x80; + addr_flag = 0x80; + udelay(LCD_DELAY_NORMAL_US); + count = 0x0; + } else if (count >= (cur_addr & 0xf)) { + count -= cur_addr & 0xf; + *LCD_CMD_ADDR = 0x80 | 0xf; + addr_flag = 0x80; + udelay(LCD_DELAY_NORMAL_US); + } + } + } else { + if (addr_flag == 0x80) { + if (count >= (0x1f - (cur_addr & 0xf))) { + count = 0x0; + addr_flag = 0xc0; + *LCD_CMD_ADDR = 0xc0 | 0xf; + udelay(LCD_DELAY_NORMAL_US); + } else if ((count + (cur_addr & 0xf)) >= 0x0f) { + count = count + (cur_addr & 0xf) - 0x0f; + addr_flag = 0xc0; + *LCD_CMD_ADDR = 0xc0; + udelay(LCD_DELAY_NORMAL_US); + } + } else if ((count + (cur_addr & 0xf)) >= 0x0f) { + count = 0x0; + *LCD_CMD_ADDR = 0xc0 | 0xf; + udelay(LCD_DELAY_NORMAL_US); + } + } + + while (count--) { + if (dir == 0) { + *LCD_CMD_ADDR = 0x10; + } else { + *LCD_CMD_ADDR = 0x14; + } + udelay(LCD_DELAY_NORMAL_US); + } + + return 0; +} + +U_BOOT_CMD(lcd_test, 1, 1, do_lcd_test, "lcd_test - lcd test display\n", NULL); +U_BOOT_CMD(lcd_cls, 1, 1, do_lcd_clear, "lcd_cls - lcd clear display\n", NULL); +U_BOOT_CMD(lcd_puts, 2, 1, do_lcd_puts, + "lcd_puts - display string on lcd\n", + "<string> - <string> to be displayed\n"); +U_BOOT_CMD(lcd_putc, 2, 1, do_lcd_putc, + "lcd_putc - display char on lcd\n", + "<char> - <char> to be displayed\n"); +U_BOOT_CMD(lcd_cur, 3, 1, do_lcd_cur, + "lcd_cur - shift cursor on lcd\n", + "<count> <dir>- shift cursor on lcd <count> times, direction is <dir> \n" + " <count> - 0~31\n" " <dir> - 0,backward; 1, forward\n"); + +#if 0 /* test-only */ +void set_phy_loopback_mode(void) +{ + char devemac2[32]; + char devemac3[32]; + + sprintf(devemac2, "%s2", CONFIG_EMAC_DEV_NAME); + sprintf(devemac3, "%s3", CONFIG_EMAC_DEV_NAME); + +#if 0 + unsigned short reg_short; + + miiphy_read(devemac2, 0x1, 1, ®_short); + if (reg_short & 0x04) { + /* + * printf("EMAC2 link up,do nothing\n"); + */ + } else { + udelay(1000); + miiphy_write(devemac2, 0x1, 0, 0x6000); + udelay(1000); + miiphy_read(devemac2, 0x1, 0, ®_short); + if (reg_short != 0x6000) { + printf + ("\nEMAC2 error set LOOPBACK mode error,reg2[0]=%x\n", + reg_short); + } + } + + miiphy_read(devemac3, 0x3, 1, ®_short); + if (reg_short & 0x04) { + /* + * printf("EMAC3 link up,do nothing\n"); + */ + } else { + udelay(1000); + miiphy_write(devemac3, 0x3, 0, 0x6000); + udelay(1000); + miiphy_read(devemac3, 0x3, 0, ®_short); + if (reg_short != 0x6000) { + printf + ("\nEMAC3 error set LOOPBACK mode error,reg2[0]=%x\n", + reg_short); + } + } +#else + /* Set PHY as LOOPBACK MODE, for Linux emac initializing */ + miiphy_write(devemac2, CONFIG_PHY2_ADDR, 0, 0x6000); + udelay(1000); + miiphy_write(devemac3, CONFIG_PHY3_ADDR, 0, 0x6000); + udelay(1000); +#endif /* 0 */ +} + +void set_phy_normal_mode(void) +{ + char devemac2[32]; + char devemac3[32]; + unsigned short reg_short; + + sprintf(devemac2, "%s2", CONFIG_EMAC_DEV_NAME); + sprintf(devemac3, "%s3", CONFIG_EMAC_DEV_NAME); + + /* Set phy of EMAC2 */ + miiphy_read(devemac2, CONFIG_PHY2_ADDR, 0x16, ®_short); + reg_short &= ~(0x7); + reg_short |= 0x6; /* RGMII DLL Delay */ + miiphy_write(devemac2, CONFIG_PHY2_ADDR, 0x16, reg_short); + + miiphy_read(devemac2, CONFIG_PHY2_ADDR, 0x17, ®_short); + reg_short &= ~(0x40); + miiphy_write(devemac2, CONFIG_PHY2_ADDR, 0x17, reg_short); + + miiphy_write(devemac2, CONFIG_PHY2_ADDR, 0x1c, 0x74f0); + + /* Set phy of EMAC3 */ + miiphy_read(devemac3, CONFIG_PHY3_ADDR, 0x16, ®_short); + reg_short &= ~(0x7); + reg_short |= 0x6; /* RGMII DLL Delay */ + miiphy_write(devemac3, CONFIG_PHY3_ADDR, 0x16, reg_short); + + miiphy_read(devemac3, CONFIG_PHY3_ADDR, 0x17, ®_short); + reg_short &= ~(0x40); + miiphy_write(devemac3, CONFIG_PHY3_ADDR, 0x17, reg_short); + + miiphy_write(devemac3, CONFIG_PHY3_ADDR, 0x1c, 0x74f0); +} +#endif /* 0 - test only */ + +static int do_led_test_off(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + volatile unsigned int *GpioOr = + (volatile unsigned int *)(CFG_PERIPHERAL_BASE + 0x700); + *GpioOr |= 0x00300000; + return 0; +} + +static int do_led_test_on(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + volatile unsigned int *GpioOr = + (volatile unsigned int *)(CFG_PERIPHERAL_BASE + 0x700); + *GpioOr &= ~0x00300000; + return 0; +} + +U_BOOT_CMD(ledon, 1, 1, do_led_test_on, + "ledon - led test light on\n", NULL); + +U_BOOT_CMD(ledoff, 1, 1, do_led_test_off, + "ledoff - led test light off\n", NULL); +#endif diff --git a/board/amcc/taishan/showinfo.c b/board/amcc/taishan/showinfo.c new file mode 100644 index 000000000..57b9d1c42 --- /dev/null +++ b/board/amcc/taishan/showinfo.c @@ -0,0 +1,236 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <command.h> +#include <asm/processor.h> +#include <pci.h> + +void show_reset_reg(void) +{ + unsigned long reg; + + /* read clock regsiter */ + printf("===== Display reset and initialize register Start =========\n"); + mfclk(clk_pllc,reg); + printf("cpr_pllc = %#010x\n",reg); + + mfclk(clk_plld,reg); + printf("cpr_plld = %#010x\n",reg); + + mfclk(clk_primad,reg); + printf("cpr_primad = %#010x\n",reg); + + mfclk(clk_primbd,reg); + printf("cpr_primbd = %#010x\n",reg); + + mfclk(clk_opbd,reg); + printf("cpr_opbd = %#010x\n",reg); + + mfclk(clk_perd,reg); + printf("cpr_perd = %#010x\n",reg); + + mfclk(clk_mald,reg); + printf("cpr_mald = %#010x\n",reg); + + /* read sdr register */ + mfsdr(sdr_ebc,reg); + printf("sdr_ebc = %#010x\n",reg); + + mfsdr(sdr_cp440,reg); + printf("sdr_cp440 = %#010x\n",reg); + + mfsdr(sdr_xcr,reg); + printf("sdr_xcr = %#010x\n",reg); + + mfsdr(sdr_xpllc,reg); + printf("sdr_xpllc = %#010x\n",reg); + + mfsdr(sdr_xplld,reg); + printf("sdr_xplld = %#010x\n",reg); + + mfsdr(sdr_pfc0,reg); + printf("sdr_pfc0 = %#010x\n",reg); + + mfsdr(sdr_pfc1,reg); + printf("sdr_pfc1 = %#010x\n",reg); + + mfsdr(sdr_cust0,reg); + printf("sdr_cust0 = %#010x\n",reg); + + mfsdr(sdr_cust1,reg); + printf("sdr_cust1 = %#010x\n",reg); + + mfsdr(sdr_uart0,reg); + printf("sdr_uart0 = %#010x\n",reg); + + mfsdr(sdr_uart1,reg); + printf("sdr_uart1 = %#010x\n",reg); + + printf("===== Display reset and initialize register End =========\n"); +} + +void show_xbridge_info(void) +{ + unsigned long reg; + + printf("PCI-X chip control registers\n"); + mfsdr(sdr_xcr, reg); + printf("sdr_xcr = %#010x\n", reg); + + mfsdr(sdr_xpllc, reg); + printf("sdr_xpllc = %#010x\n", reg); + + mfsdr(sdr_xplld, reg); + printf("sdr_xplld = %#010x\n", reg); + + printf("PCI-X Bridge Configure registers\n"); + printf("PCIX0_VENDID = %#06x\n", in16r(PCIX0_VENDID)); + printf("PCIX0_DEVID = %#06x\n", in16r(PCIX0_DEVID)); + printf("PCIX0_CMD = %#06x\n", in16r(PCIX0_CMD)); + printf("PCIX0_STATUS = %#06x\n", in16r(PCIX0_STATUS)); + printf("PCIX0_REVID = %#04x\n", in8(PCIX0_REVID)); + printf("PCIX0_CACHELS = %#04x\n", in8(PCIX0_CACHELS)); + printf("PCIX0_LATTIM = %#04x\n", in8(PCIX0_LATTIM)); + printf("PCIX0_HDTYPE = %#04x\n", in8(PCIX0_HDTYPE)); + printf("PCIX0_BIST = %#04x\n", in8(PCIX0_BIST)); + + printf("PCIX0_BAR0 = %#010x\n", in32r(PCIX0_BAR0)); + printf("PCIX0_BAR1 = %#010x\n", in32r(PCIX0_BAR1)); + printf("PCIX0_BAR2 = %#010x\n", in32r(PCIX0_BAR2)); + printf("PCIX0_BAR3 = %#010x\n", in32r(PCIX0_BAR3)); + printf("PCIX0_BAR4 = %#010x\n", in32r(PCIX0_BAR4)); + printf("PCIX0_BAR5 = %#010x\n", in32r(PCIX0_BAR5)); + + printf("PCIX0_CISPTR = %#010x\n", in32r(PCIX0_CISPTR)); + printf("PCIX0_SBSSYSVID = %#010x\n", in16r(PCIX0_SBSYSVID)); + printf("PCIX0_SBSSYSID = %#010x\n", in16r(PCIX0_SBSYSID)); + printf("PCIX0_EROMBA = %#010x\n", in32r(PCIX0_EROMBA)); + printf("PCIX0_CAP = %#04x\n", in8(PCIX0_CAP)); + printf("PCIX0_INTLN = %#04x\n", in8(PCIX0_INTLN)); + printf("PCIX0_INTPN = %#04x\n", in8(PCIX0_INTPN)); + printf("PCIX0_MINGNT = %#04x\n", in8(PCIX0_MINGNT)); + printf("PCIX0_MAXLTNCY = %#04x\n", in8(PCIX0_MAXLTNCY)); + + printf("PCIX0_BRDGOPT1 = %#010x\n", in32r(PCIX0_BRDGOPT1)); + printf("PCIX0_BRDGOPT2 = %#010x\n", in32r(PCIX0_BRDGOPT2)); + + printf("PCIX0_POM0LAL = %#010x\n", in32r(PCIX0_POM0LAL)); + printf("PCIX0_POM0LAH = %#010x\n", in32r(PCIX0_POM0LAH)); + printf("PCIX0_POM0SA = %#010x\n", in32r(PCIX0_POM0SA)); + printf("PCIX0_POM0PCILAL = %#010x\n", in32r(PCIX0_POM0PCIAL)); + printf("PCIX0_POM0PCILAH = %#010x\n", in32r(PCIX0_POM0PCIAH)); + printf("PCIX0_POM1LAL = %#010x\n", in32r(PCIX0_POM1LAL)); + printf("PCIX0_POM1LAH = %#010x\n", in32r(PCIX0_POM1LAH)); + printf("PCIX0_POM1SA = %#010x\n", in32r(PCIX0_POM1SA)); + printf("PCIX0_POM1PCILAL = %#010x\n", in32r(PCIX0_POM1PCIAL)); + printf("PCIX0_POM1PCILAH = %#010x\n", in32r(PCIX0_POM1PCIAH)); + printf("PCIX0_POM2SA = %#010x\n", in32r(PCIX0_POM2SA)); + + printf("PCIX0_PIM0SA = %#010x\n", in32r(PCIX0_PIM0SA)); + printf("PCIX0_PIM0LAL = %#010x\n", in32r(PCIX0_PIM0LAL)); + printf("PCIX0_PIM0LAH = %#010x\n", in32r(PCIX0_PIM0LAH)); + printf("PCIX0_PIM1SA = %#010x\n", in32r(PCIX0_PIM1SA)); + printf("PCIX0_PIM1LAL = %#010x\n", in32r(PCIX0_PIM1LAL)); + printf("PCIX0_PIM1LAH = %#010x\n", in32r(PCIX0_PIM1LAH)); + printf("PCIX0_PIM2SA = %#010x\n", in32r(PCIX0_PIM1SA)); + printf("PCIX0_PIM2LAL = %#010x\n", in32r(PCIX0_PIM1LAL)); + printf("PCIX0_PIM2LAH = %#010x\n", in32r(PCIX0_PIM1LAH)); + + printf("PCIX0_XSTS = %#010x\n", in32r(PCIX0_STS)); +} + +int do_show_xbridge_info(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + show_xbridge_info(); + return 0; +} + +U_BOOT_CMD(xbriinfo, 1, 1, do_show_xbridge_info, + "xbriinfo - Show PCIX bridge info\n", NULL); + +#define TAISHAN_PCI_DEV_ID0 0x800 +#define TAISHAN_PCI_DEV_ID1 0x1000 + +void show_pcix_device_info(void) +{ + int ii; + int dev; + u8 capp; + u8 xcapid; + u16 status; + u16 xcommand; + u32 xstatus; + + for (ii = 0; ii < 2; ii++) { + if (ii == 0) + dev = TAISHAN_PCI_DEV_ID0; + else + dev = TAISHAN_PCI_DEV_ID1; + + pci_read_config_word(dev, PCI_STATUS, &status); + if (status & PCI_STATUS_CAP_LIST) { + pci_read_config_byte(dev, PCI_CAPABILITY_LIST, &capp); + + pci_read_config_byte(dev, (int)(capp), &xcapid); + if (xcapid == 0x07) { + pci_read_config_word(dev, (int)(capp + 2), + &xcommand); + pci_read_config_dword(dev, (int)(capp + 4), + &xstatus); + printf("BUS0 dev%d Xcommand=%#06x,Xstatus=%#010x\n", + (ii + 1), xcommand, xstatus); + } else { + printf("BUS0 dev%d PCI-X CAP ID error," + "CAP=%#04x,XCAPID=%#04x\n", + (ii + 1), capp, xcapid); + } + } else { + printf("BUS0 dev%d not found PCI_STATUS_CAP_LIST supporting\n", + ii + 1); + } + } + +} + +int do_show_pcix_device_info(cmd_tbl_t * cmdtp, int flag, int argc, + char *argv[]) +{ + show_pcix_device_info(); + return 0; +} + +U_BOOT_CMD(xdevinfo, 1, 1, do_show_pcix_device_info, + "xdevinfo - Show PCIX Device info\n", NULL); + +extern void show_reset_reg(void); + +int do_show_reset_reg_info(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + show_reset_reg(); + return 0; +} + +U_BOOT_CMD(resetinfo, 1, 1, do_show_reset_reg_info, + "resetinfo - Show Reset REG info\n", NULL); diff --git a/board/amcc/taishan/taishan.c b/board/amcc/taishan/taishan.c new file mode 100644 index 000000000..1a2e53b1a --- /dev/null +++ b/board/amcc/taishan/taishan.c @@ -0,0 +1,331 @@ +/* + * Copyright (C) 2004 PaulReynolds@lhsolutions.com + * + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/processor.h> +#include <spd_sdram.h> +#include <ppc4xx_enet.h> + +#ifdef CFG_INIT_SHOW_RESET_REG +void show_reset_reg(void); +#endif + +int lcd_init(void); + +int board_early_init_f (void) +{ + unsigned long reg; + volatile unsigned int *GpioOdr; + volatile unsigned int *GpioTcr; + volatile unsigned int *GpioOr; + + /*-------------------------------------------------------------------------+ + | Initialize EBC CONFIG + +-------------------------------------------------------------------------*/ + mtebc(xbcfg, EBC_CFG_LE_UNLOCK | + EBC_CFG_PTD_ENABLE | EBC_CFG_RTC_64PERCLK | + EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS | + EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_DEFAULT | + EBC_CFG_PME_DISABLE | EBC_CFG_PR_32); + + /*-------------------------------------------------------------------------+ + | 64MB FLASH. Initialize bank 0 with default values. + +-------------------------------------------------------------------------*/ + mtebc(pb0ap, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(15) | + EBC_BXAP_BCE_DISABLE | + EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_OEN_ENCODE(1) | + EBC_BXAP_WBN_ENCODE(1) | EBC_BXAP_WBF_ENCODE(1) | + EBC_BXAP_TH_ENCODE(3) | EBC_BXAP_RE_DISABLED | + EBC_BXAP_BEM_WRITEONLY | + EBC_BXAP_PEN_DISABLED); + mtebc(pb0cr, EBC_BXCR_BAS_ENCODE(CFG_FLASH_BASE) | + EBC_BXCR_BS_64MB | EBC_BXCR_BU_RW|EBC_BXCR_BW_32BIT); + + /*-------------------------------------------------------------------------+ + | FPGA. Initialize bank 1 with default values. + +-------------------------------------------------------------------------*/ + mtebc(pb1ap, EBC_BXAP_BME_DISABLED|EBC_BXAP_TWT_ENCODE(5) | + EBC_BXAP_BCE_DISABLE | + EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_OEN_ENCODE(1) | + EBC_BXAP_WBN_ENCODE(1) | EBC_BXAP_WBF_ENCODE(1) | + EBC_BXAP_TH_ENCODE(3) | EBC_BXAP_RE_DISABLED | + EBC_BXAP_BEM_WRITEONLY | + EBC_BXAP_PEN_DISABLED); + mtebc(pb1cr, EBC_BXCR_BAS_ENCODE(0x41000000) | + EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT); + + /*-------------------------------------------------------------------------+ + | LCM. Initialize bank 2 with default values. + +-------------------------------------------------------------------------*/ + mtebc(pb2ap, EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(64) | + EBC_BXAP_BCE_DISABLE | + EBC_BXAP_CSN_ENCODE(3) | EBC_BXAP_OEN_ENCODE(3) | + EBC_BXAP_WBN_ENCODE(3) | EBC_BXAP_WBF_ENCODE(3) | + EBC_BXAP_TH_ENCODE(7) | EBC_BXAP_RE_DISABLED | + EBC_BXAP_BEM_WRITEONLY | + EBC_BXAP_PEN_DISABLED); + mtebc(pb2cr, EBC_BXCR_BAS_ENCODE(0x42000000) | + EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW|EBC_BXCR_BW_8BIT); + + /*-------------------------------------------------------------------------+ + | TMP. Initialize bank 3 with default values. + +-------------------------------------------------------------------------*/ + mtebc(pb3ap, EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(128) | + EBC_BXAP_BCE_DISABLE | + EBC_BXAP_CSN_ENCODE(3) | EBC_BXAP_OEN_ENCODE(3) | + EBC_BXAP_WBN_ENCODE(3) | EBC_BXAP_WBF_ENCODE(3) | + EBC_BXAP_TH_ENCODE(7) | EBC_BXAP_RE_DISABLED | + EBC_BXAP_BEM_WRITEONLY | + EBC_BXAP_PEN_DISABLED); + mtebc(pb3cr, EBC_BXCR_BAS_ENCODE(0x48000000) | + EBC_BXCR_BS_64MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT); + + /*-------------------------------------------------------------------------+ + | Connector 4~7. Initialize bank 3~ 7 with default values. + +-------------------------------------------------------------------------*/ + mtebc(pb4ap,0); + mtebc(pb4cr,0); + mtebc(pb5ap,0); + mtebc(pb5cr,0); + mtebc(pb6ap,0); + mtebc(pb6cr,0); + mtebc(pb7ap,0); + mtebc(pb7cr,0); + + /*-------------------------------------------------------------------- + * Setup the interrupt controller polarities, triggers, etc. + *-------------------------------------------------------------------*/ + mtdcr (uic0sr, 0xffffffff); /* clear all */ + mtdcr (uic0er, 0x00000000); /* disable all */ + mtdcr (uic0cr, 0x00000009); /* SMI & UIC1 crit are critical */ + mtdcr (uic0pr, 0xfffffe13); /* per ref-board manual */ + mtdcr (uic0tr, 0x01c00008); /* per ref-board manual */ + mtdcr (uic0vr, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr (uic0sr, 0xffffffff); /* clear all */ + + mtdcr (uic1sr, 0xffffffff); /* clear all */ + mtdcr (uic1er, 0x00000000); /* disable all */ + mtdcr (uic1cr, 0x00000000); /* all non-critical */ + mtdcr (uic1pr, 0xffffe0ff); /* per ref-board manual */ + mtdcr (uic1tr, 0x00ffc000); /* per ref-board manual */ + mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr (uic1sr, 0xffffffff); /* clear all */ + + mtdcr (uic2sr, 0xffffffff); /* clear all */ + mtdcr (uic2er, 0x00000000); /* disable all */ + mtdcr (uic2cr, 0x00000000); /* all non-critical */ + mtdcr (uic2pr, 0xffffffff); /* per ref-board manual */ + mtdcr (uic2tr, 0x00ff8c0f); /* per ref-board manual */ + mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr (uic2sr, 0xffffffff); /* clear all */ + + mtdcr (uicb0sr, 0xfc000000); /* clear all */ + mtdcr (uicb0er, 0x00000000); /* disable all */ + mtdcr (uicb0cr, 0x00000000); /* all non-critical */ + mtdcr (uicb0pr, 0xfc000000); /* */ + mtdcr (uicb0tr, 0x00000000); /* */ + mtdcr (uicb0vr, 0x00000001); /* */ + + /* Enable two GPIO 10~11 and TraceA signal */ + mfsdr(sdr_pfc0,reg); + reg |= 0x00300000; + mtsdr(sdr_pfc0,reg); + + mfsdr(sdr_pfc1,reg); + reg |= 0x00100000; + mtsdr(sdr_pfc1,reg); + + /* Set GPIO 10 and 11 as output */ + GpioOdr = (volatile unsigned int*)(CFG_PERIPHERAL_BASE+0x718); + GpioTcr = (volatile unsigned int*)(CFG_PERIPHERAL_BASE+0x704); + GpioOr = (volatile unsigned int*)(CFG_PERIPHERAL_BASE+0x700); + + *GpioOdr &= ~(0x00300000); + *GpioTcr |= 0x00300000; + *GpioOr |= 0x00300000; + + return 0; +} + +int misc_init_r(void) +{ + lcd_init(); + + return 0; +} + +int checkboard (void) +{ + char *s = getenv ("serial#"); + + printf ("Board: Taishan - AMCC PPC440GX Evaluation Board"); + if (s != NULL) { + puts (", serial# "); + puts (s); + } + putc ('\n'); + +#ifdef CFG_INIT_SHOW_RESET_REG + show_reset_reg(); +#endif + + return (0); +} + +#if defined(CFG_DRAM_TEST) +int testdram (void) +{ + uint *pstart = (uint *) 0x04000000; + uint *pend = (uint *) 0x0fc00000; + uint *p; + + for (p = pstart; p < pend; p++) + *p = 0xaaaaaaaa; + + for (p = pstart; p < pend; p++) { + if (*p != 0xaaaaaaaa) { + printf ("SDRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + + for (p = pstart; p < pend; p++) + *p = 0x55555555; + + for (p = pstart; p < pend; p++) { + if (*p != 0x55555555) { + printf ("SDRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + return 0; +} +#endif + +/************************************************************************* + * pci_pre_init + * + * This routine is called just prior to registering the hose and gives + * the board the opportunity to check things. Returning a value of zero + * indicates that things are bad & PCI initialization should be aborted. + * + * Different boards may wish to customize the pci controller structure + * (add regions, override default access routines, etc) or perform + * certain pre-initialization actions. + * + ************************************************************************/ +#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) +int pci_pre_init(struct pci_controller * hose ) +{ + unsigned long strap; + + /*--------------------------------------------------------------------------+ + * The ocotea board is always configured as the host & requires the + * PCI arbiter to be enabled. + *--------------------------------------------------------------------------*/ + mfsdr(sdr_sdstp1, strap); + if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){ + printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); + return 0; + } + + return 1; +} +#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */ + +/************************************************************************* + * pci_target_init + * + * The bootstrap configuration provides default settings for the pci + * inbound map (PIM). But the bootstrap config choices are limited and + * may not be sufficient for a given board. + * + ************************************************************************/ +#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) +void pci_target_init(struct pci_controller * hose ) +{ + DECLARE_GLOBAL_DATA_PTR; + + /*--------------------------------------------------------------------------+ + * Disable everything + *--------------------------------------------------------------------------*/ + out32r( PCIX0_PIM0SA, 0 ); /* disable */ + out32r( PCIX0_PIM1SA, 0 ); /* disable */ + out32r( PCIX0_PIM2SA, 0 ); /* disable */ + out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */ + + /*--------------------------------------------------------------------------+ + * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping + * options to not support sizes such as 128/256 MB. + *--------------------------------------------------------------------------*/ + out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE ); + out32r( PCIX0_PIM0LAH, 0 ); + out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 ); + + out32r( PCIX0_BAR0, 0 ); + + /*--------------------------------------------------------------------------+ + * Program the board's subsystem id/vendor id + *--------------------------------------------------------------------------*/ + out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID ); + out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID ); + + out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY ); +} +#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ + +/************************************************************************* + * is_pci_host + * + * This routine is called to determine if a pci scan should be + * performed. With various hardware environments (especially cPCI and + * PPMC) it's insufficient to depend on the state of the arbiter enable + * bit in the strap register, or generic host/adapter assumptions. + * + * Rather than hard-code a bad assumption in the general 440 code, the + * 440 pci code requires the board to decide at runtime. + * + * Return 0 for adapter mode, non-zero for host (monarch) mode. + * + * + ************************************************************************/ +#if defined(CONFIG_PCI) +int is_pci_host(struct pci_controller *hose) +{ + /* The ocotea board is always configured as host. */ + return(1); +} +#endif /* defined(CONFIG_PCI) */ + +#ifdef CONFIG_POST +/* + * Returns 1 if keys pressed to start the power-on long-running tests + * Called from board_init_f(). + */ +int post_hotkeys_pressed(void) +{ + return (ctrlc()); +} +#endif diff --git a/board/amcc/taishan/u-boot.lds b/board/amcc/taishan/u-boot.lds new file mode 100644 index 000000000..664716ed4 --- /dev/null +++ b/board/amcc/taishan/u-boot.lds @@ -0,0 +1,157 @@ +/* + * (C) Copyright 2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + .resetvec 0xFFFFFFFC : + { + *(.resetvec) + } = 0xffff + + .bootpg 0xFFFFF000 : + { + cpu/ppc4xx/start.o (.bootpg) + } = 0xffff + + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/ppc4xx/start.o (.text) + board/amcc/taishan/init.o (.text) + cpu/ppc4xx/kgdb.o (.text) + cpu/ppc4xx/traps.o (.text) + cpu/ppc4xx/interrupts.o (.text) + cpu/ppc4xx/serial.o (.text) + cpu/ppc4xx/cpu_init.o (.text) + cpu/ppc4xx/speed.o (.text) + common/dlmalloc.o (.text) + lib_generic/crc32.o (.text) + lib_ppc/extable.o (.text) + lib_generic/zlib.o (.text) + +/* . = env_offset;*/ +/* common/environment.o(.text)*/ + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/amcc/taishan/update.c b/board/amcc/taishan/update.c new file mode 100644 index 000000000..ed2c196dc --- /dev/null +++ b/board/amcc/taishan/update.c @@ -0,0 +1,78 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <command.h> +#include <asm/processor.h> +#include <i2c.h> + +#if defined(CONFIG_TAISHAN) + +const uchar bootstrap_buf[16] = { + 0x86, + 0x78, + 0xc1, + 0xa6, + 0x09, + 0x67, + 0x04, + 0x63, + 0x00, + 0x00, + 0x00, + 0x00, + 0x00, + 0x00, + 0x00, + 0x00 +}; + +static int update_boot_eeprom(void) +{ + ulong len = 0x10; + uchar chip = CFG_BOOTSTRAP_IIC_ADDR; + uchar *pbuf = (uchar *)bootstrap_buf; + int ii, jj; + + for (ii = 0; ii < len; ii++) { + if (i2c_write(chip, ii, 1, &pbuf[ii], 1) != 0) { + printf("i2c_write failed\n"); + return -1; + } + + /* wait 10ms */ + for (jj = 0; jj < 10; jj++) + udelay(1000); + } + return 0; +} + +int do_update_boot_eeprom(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + return update_boot_eeprom(); +} + +U_BOOT_CMD(update_boot_eeprom, 1, 1, do_update_boot_eeprom, + "update_boot_eeprom - update bootstrap eeprom content\n", NULL); +#endif diff --git a/board/amcc/yellowstone/yellowstone.c b/board/amcc/yellowstone/yellowstone.c index 754ae449c..04f58e041 100644 --- a/board/amcc/yellowstone/yellowstone.c +++ b/board/amcc/yellowstone/yellowstone.c @@ -39,24 +39,6 @@ int board_early_init_f(void) reg = mfdcr(ebccfgd); mtdcr(ebccfgd, reg | 0x04000000); /* Set ATC */ - mtebc(pb0ap, 0x03017300); /* FLASH/SRAM */ - mtebc(pb0cr, 0xfc0da000); /* BAS=0xfc0 64MB r/w 16-bit */ - - mtebc(pb1ap, 0x00000000); - mtebc(pb1cr, 0x00000000); - - mtebc(pb2ap, 0x04814500); - /*CPLD*/ mtebc(pb2cr, 0x80018000); /*BAS=0x800 1MB r/w 8-bit */ - - mtebc(pb3ap, 0x00000000); - mtebc(pb3cr, 0x00000000); - - mtebc(pb4ap, 0x00000000); - mtebc(pb4cr, 0x00000000); - - mtebc(pb5ap, 0x00000000); - mtebc(pb5cr, 0x00000000); - /*-------------------------------------------------------------------- * Setup the GPIO pins *-------------------------------------------------------------------*/ @@ -190,8 +172,15 @@ int misc_init_r (void) int checkboard(void) { char *s = getenv("serial#"); + u8 rev; + u8 val; printf("Board: Yellowstone - AMCC PPC440GR Evaluation Board"); + + rev = *(u8 *)(CFG_CPLD + 0); + val = *(u8 *)(CFG_CPLD + 5) & 0x01; + printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33); + if (s != NULL) { puts(", serial# "); puts(s); diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c index 588ee900d..d47219cb6 100644 --- a/board/amcc/yosemite/yosemite.c +++ b/board/amcc/yosemite/yosemite.c @@ -39,24 +39,6 @@ int board_early_init_f(void) reg = mfdcr(ebccfgd); mtdcr(ebccfgd, reg | 0x04000000); /* Set ATC */ - mtebc(pb0ap, 0x03017300); /* FLASH/SRAM */ - mtebc(pb0cr, 0xfc0da000); /* BAS=0xfc0 64MB r/w 16-bit */ - - mtebc(pb1ap, 0x00000000); - mtebc(pb1cr, 0x00000000); - - mtebc(pb2ap, 0x04814500); - /*CPLD*/ mtebc(pb2cr, 0x80018000); /*BAS=0x800 1MB r/w 8-bit */ - - mtebc(pb3ap, 0x00000000); - mtebc(pb3cr, 0x00000000); - - mtebc(pb4ap, 0x00000000); - mtebc(pb4cr, 0x00000000); - - mtebc(pb5ap, 0x00000000); - mtebc(pb5cr, 0x00000000); - /*-------------------------------------------------------------------- * Setup the GPIO pins *-------------------------------------------------------------------*/ @@ -186,8 +168,15 @@ int misc_init_r (void) int checkboard(void) { char *s = getenv("serial#"); + u8 rev; + u8 val; printf("Board: Yosemite - AMCC PPC440EP Evaluation Board"); + + rev = *(u8 *)(CFG_CPLD + 0); + val = *(u8 *)(CFG_CPLD + 5) & 0x01; + printf(", Rev. %X, PCI=%d MHz", rev, val ? 66 : 33); + if (s != NULL) { puts(", serial# "); puts(s); diff --git a/board/mcc200/auto_update.c b/board/mcc200/auto_update.c index 63e4139fc..f1bb72128 100644 --- a/board/mcc200/auto_update.c +++ b/board/mcc200/auto_update.c @@ -121,10 +121,10 @@ struct flash_layout aufl_layout[AU_MAXFILES] = { \ #define I2C_PSOC_KEYPAD_ADDR 0x53 /* keypad mask */ -#define KEYPAD_ROW 3 -#define KEYPAD_COL 3 -#define KEYPAD_MASK_LO ((1<<(KEYPAD_COL-1+(KEYPAD_ROW*4-4)))&0xFF) -#define KEYPAD_MASK_HI ((1<<(KEYPAD_COL-1+(KEYPAD_ROW*4-4)))>>8) +#define KEYPAD_ROW 2 +#define KEYPAD_COL 2 +#define KEYPAD_MASK_LO ((1<<(KEYPAD_COL-1+(KEYPAD_ROW*3-3)))&0xFF) +#define KEYPAD_MASK_HI ((1<<(KEYPAD_COL-1+(KEYPAD_ROW*3-3)))>>8) /* externals */ extern int fat_register_device(block_dev_desc_t *, int); diff --git a/board/mcc200/mcc200.c b/board/mcc200/mcc200.c index 67969a601..af047e2a0 100644 --- a/board/mcc200/mcc200.c +++ b/board/mcc200/mcc200.c @@ -92,8 +92,8 @@ static void sdram_start (int hi_addr) /* * ATTENTION: Although partially referenced initdram does NOT make real use - * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE - * is something else than 0x00000000. + * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE + * is something else than 0x00000000. */ long int initdram (int board_type) @@ -228,10 +228,6 @@ int misc_init_r (void) { ulong flash_sup_end, snum; -#ifdef CONFIG_AUTO_UPDATE - /* this has priority over all else */ - do_auto_update(); -#endif /* * Adjust flash start and offset to detected values */ @@ -294,6 +290,9 @@ int misc_init_r (void) flash_info[0].sector_count = snum; } +#ifdef CONFIG_AUTO_UPDATE + do_auto_update(); +#endif return (0); } diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c index 238956127..5abc87dde 100644 --- a/board/prodrive/alpr/alpr.c +++ b/board/prodrive/alpr/alpr.c @@ -77,8 +77,12 @@ int board_early_init_f (void) mtdcr (uicb0tr, 0x00000000); /* */ mtdcr (uicb0vr, 0x00000001); /* */ + /* Setup shutdown/SSD empty interrupt as inputs */ + out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CFG_GPIO_SHUTDOWN | CFG_GPIO_SSD_EMPTY)); + out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CFG_GPIO_SHUTDOWN | CFG_GPIO_SSD_EMPTY)); + /* Setup GPIO/IRQ multiplexing */ - mtsdr(sdr_pfc0, 0x01a03e00); + mtsdr(sdr_pfc0, 0x01a33e00); return 0; } @@ -105,26 +109,11 @@ int last_stage_init(void) static int board_rev(void) { - int rev; - u32 pfc0; - - /* Setup GPIO14 & 15 as GPIO */ - mfsdr(sdr_pfc0, pfc0); - pfc0 |= CFG_GPIO_REV0 | CFG_GPIO_REV1; - mtsdr(sdr_pfc0, pfc0); - /* Setup as input */ - out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV0)); - out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV0)); - - rev = (in32(GPIO0_IR) >> 16) & 0x3; - - /* Setup GPIO14 & 15 as non GPIO again */ - mfsdr(sdr_pfc0, pfc0); - pfc0 &= ~(CFG_GPIO_REV0 | CFG_GPIO_REV1); - mtsdr(sdr_pfc0, pfc0); + out32(GPIO0_TCR, in32(GPIO0_TCR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV1)); + out32(GPIO0_ODR, in32(GPIO0_ODR) & ~(CFG_GPIO_REV0 | CFG_GPIO_REV1)); - return rev; + return (in32(GPIO0_IR) >> 16) & 0x3; } int checkboard (void) diff --git a/board/prodrive/alpr/nand.c b/board/prodrive/alpr/nand.c index e63c921ef..d66b08847 100644 --- a/board/prodrive/alpr/nand.c +++ b/board/prodrive/alpr/nand.c @@ -154,7 +154,7 @@ static int alpr_nand_dev_ready(struct mtd_info *mtd) return 1; } -void board_nand_init(struct nand_chip *nand) +int board_nand_init(struct nand_chip *nand) { alpr_ndfc = (struct alpr_ndfc_regs *)CFG_NAND_BASE; @@ -169,5 +169,7 @@ void board_nand_init(struct nand_chip *nand) nand->read_buf = alpr_nand_read_buf; nand->verify_buf = alpr_nand_verify_buf; nand->dev_ready = alpr_nand_dev_ready; + + return 0; } #endif diff --git a/board/prodrive/p3mx/p3mx.c b/board/prodrive/p3mx/p3mx.c index 6cebd1aeb..d54ddaffc 100644 --- a/board/prodrive/p3mx/p3mx.c +++ b/board/prodrive/p3mx/p3mx.c @@ -45,6 +45,7 @@ #include "mpsc.h" #include "64460.h" #include "mv_regs.h" +#include "p3mx.h" DECLARE_GLOBAL_DATA_PTR; @@ -79,6 +80,7 @@ extern flash_info_t flash_info[]; void board_prebootm_init (void); unsigned int INTERNAL_REG_BASE_ADDR = CFG_GT_REGS; int display_mem_map (void); +void set_led(int); /* ------------------------------------------------------------------------- */ @@ -246,7 +248,6 @@ int board_early_init_f (void) * that if it's not at the power-on location, it's where we put * it last time. (huber) */ - my_remap_gt_regs (CFG_DFL_GT_REGS, CFG_GT_REGS); #ifdef CONFIG_PCI @@ -287,6 +288,8 @@ int board_early_init_f (void) GT_REG_WRITE (GPP_LEVEL_CONTROL, CFG_GPP_LEVEL_CONTROL); + set_led(LED_RED); + return 0; } @@ -332,6 +335,7 @@ void after_reloc (ulong dest_addr, gd_t * gd) /* display_mem_map(); */ /* now, jump to the main U-Boot board init code */ + set_led(LED_GREEN); board_init_r (gd, dest_addr); /* NOTREACHED */ } @@ -356,15 +360,66 @@ int checkboard (void) return (0); } -/* utility functions */ -void debug_led (int led, int mode) +void set_led(int col) { + int tmp; + int on_pin; + int off_pin; + + /* Program Mpp[22] as Gpp[22] + * Program Mpp[23] as Gpp[23] + */ + tmp = GTREGREAD(MPP_CONTROL2); + tmp &= 0x00ffffff; + GT_REG_WRITE(MPP_CONTROL2,tmp); + + /* Program Gpp[22] and Gpp[23] as output + */ + tmp = GTREGREAD(GPP_IO_CONTROL); + tmp |= 0x00C00000; + GT_REG_WRITE(GPP_IO_CONTROL, tmp); + + /* Program Gpp[22] and Gpp[23] as active high + */ + tmp = GTREGREAD(GPP_LEVEL_CONTROL); + tmp &= 0xff3fffff; + GT_REG_WRITE(GPP_LEVEL_CONTROL, tmp); + + switch(col) { + default: + case LED_OFF : + on_pin = 0; + off_pin = ((1 << 23) | (1 << 22)); + break; + case LED_RED : + on_pin = (1 << 23); + off_pin = (1 << 22); + break; + case LED_GREEN : + on_pin = (1 << 22); + off_pin = (1 << 23); + break; + case LED_ORANGE : + on_pin = ((1 << 23) | (1 << 22)); + off_pin = 0; + break; + } + + /* Set output Gpp[22] and Gpp[23] + */ + tmp = GTREGREAD(GPP_VALUE); + tmp |= on_pin; + tmp &= ~off_pin; + GT_REG_WRITE(GPP_VALUE, tmp); } int display_mem_map (void) { - int i, j; + int i; unsigned int base, size, width; +#ifdef CONFIG_PCI + int j; +#endif /* SDRAM */ printf ("SD (DDR) RAM\n"); diff --git a/board/prodrive/p3mx/sdram_init.c b/board/prodrive/p3mx/sdram_init.c index 176252efe..046486042 100644 --- a/board/prodrive/p3mx/sdram_init.c +++ b/board/prodrive/p3mx/sdram_init.c @@ -65,7 +65,7 @@ int mvDmaTransfer (int, ulong, ulong, ulong, ulong); int memory_map_bank (unsigned int bankNo, unsigned int bankBase, unsigned int bankLength) { -#ifdef MAP_PCI +#if defined (MAP_PCI) && defined (CONFIG_PCI) PCI_HOST host; #endif @@ -80,7 +80,7 @@ int memory_map_bank (unsigned int bankNo, memoryMapBank (bankNo, bankBase, bankLength); -#ifdef MAP_PCI +#if defined (MAP_PCI) && defined (CONFIG_PCI) for (host = PCI_HOST0; host <= PCI_HOST1; host++) { const int features = PREFETCH_ENABLE | diff --git a/board/prodrive/pdnb3/flash.c b/board/prodrive/pdnb3/flash.c index d0e5fe703..518ea9c03 100644 --- a/board/prodrive/pdnb3/flash.c +++ b/board/prodrive/pdnb3/flash.c @@ -24,6 +24,8 @@ #include <common.h> #include <asm/arch/ixp425.h> +#if !defined(CFG_FLASH_CFI_DRIVER) + /* * include common flash code (for esd boards) */ @@ -83,3 +85,5 @@ unsigned long flash_init(void) return size; } + +#endif /* CFG_FLASH_CFI_DRIVER */ diff --git a/board/sc3/Makefile b/board/sc3/Makefile new file mode 100644 index 000000000..1b0b15fc6 --- /dev/null +++ b/board/sc3/Makefile @@ -0,0 +1,47 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS = $(BOARD).o sc3nand.o +SOBJS = init.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $^ + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/board/sc3/config.mk b/board/sc3/config.mk new file mode 100644 index 000000000..1bdf5e4fc --- /dev/null +++ b/board/sc3/config.mk @@ -0,0 +1,24 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0xFFFC0000 diff --git a/board/sc3/init.S b/board/sc3/init.S new file mode 100644 index 000000000..e7b3c8394 --- /dev/null +++ b/board/sc3/init.S @@ -0,0 +1,382 @@ +/*------------------------------------------------------------------------------+ + * + * This souce code has been made available to you by EuroDesign + * (www.eurodsn.de). It's based on the original IBM source code, so + * this follows: + * + * This source code has been made available to you by IBM on an AS-IS + * basis. Anyone receiving this source is licensed under IBM + * copyrights to use it in any way he or she deems fit, including + * copying it, modifying it, compiling it, and redistributing it either + * with or without modifications. No license under IBM patents or + * patent applications is to be implied by the copyright license. + * + * Any user of this software should understand that IBM cannot provide + * technical support for this software and will not be responsible for + * any consequences resulting from the use of this software. + * + * Any person who transfers this source code or any derivative work + * must include the IBM copyright notice, this paragraph, and the + * preceding two paragraphs in the transferred software. + * + * COPYRIGHT I B M CORPORATION 1995 + * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M + *------------------------------------------------------------------------------- */ + +#include <config.h> +#include <ppc4xx.h> + +#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */ + +#include <ppc_asm.tmpl> +#include <ppc_defs.h> + +#include <asm/cache.h> +#include <asm/mmu.h> + +/** + * ext_bus_cntlr_init - Initializes the External Bus Controller for the external peripherals + * + * IMPORTANT: For pass1 this code must run from cache since you can not + * reliably change a peripheral banks timing register (pbxap) while running + * code from that bank. For ex., since we are running from ROM on bank 0, we + * can NOT execute the code that modifies bank 0 timings from ROM, so + * we run it from cache. + * + * Bank 0 - Boot-Flash + * Bank 1 - NAND-Flash + * Bank 2 - ISA bus + * Bank 3 - Second Flash + * Bank 4 - USB controller + */ + .globl ext_bus_cntlr_init +ext_bus_cntlr_init: +/* + * We need the current boot up configuration to set correct + * timings into internal flash and external flash + */ + mfdcr r24,strap /* xxxx xxxx xxxx xxx? ?xxx xxxx xxxx xxxx + 0 0 -> 8 bit external ROM + 0 1 -> 16 bit internal ROM */ + addi r4,0,2 + srw r24,r24,r4 /* shift right r24 two positions */ + andi. r24,r24,0x06000 +/* + * All calculations are based on 33MHz EBC clock. + * + * First, create a "very slow" timing (~250ns) with burst mode enabled + * This is need for the external flash access + */ + lis r25,0x0800 + ori r25,r25,0x0280 /* 0000 1000 0xxx 0000 0000 0010 100x xxxx = 0x03800280 +/* + * Second, create a fast timing: + * 90ns first cycle - 3 clock access + * and 90ns burst cycle, plus 1 clock after the last access + * This is used for the internal access + */ + lis r26,0x8900 + ori r26,r26,0x0280 /* 1000 1001 0xxx 0000 0000 0010 100x xxxx +/* + * We can't change settings on CS# if we currently use them. + * -> load a few instructions into cache and run this code from cache + */ + mflr r4 /* save link register */ + bl ..getAddr +..getAddr: + mflr r3 /* get address of ..getAddr */ + mtlr r4 /* restore link register */ + addi r4,0,14 /* set ctr to 10; used to prefetch */ + mtctr r4 /* 10 cache lines to fit this function + in cache (gives us 8x10=80 instructions) */ +..ebcloop: + icbt r0,r3 /* prefetch cache line for addr in r3 */ + addi r3,r3,32 /* move to next cache line */ + bdnz ..ebcloop /* continue for 10 cache lines */ +/* + * Delay to ensure all accesses to ROM are complete before changing + * bank 0 timings. 200usec should be enough. + * 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles + */ + lis r3,0x0 + ori r3,r3,0xA000 /* ensure 200usec have passed since reset */ + mtctr r3 +..spinlp: + bdnz ..spinlp /* spin loop */ + +/*----------------------------------------------------------------------- + * Memory Bank 0 (BOOT-ROM) initialization + * 0xFFEF00000....0xFFFFFFF + * We only have to change the timing. Mapping is ok by boot-strapping + *----------------------------------------------------------------------- */ + + li r4,pb0ap /* PB0AP=Peripheral Bank 0 Access Parameters */ + mtdcr ebccfga,r4 + + mr r4,r26 /* assume internal fast flash is boot flash */ + cmpwi r24,0x2000 /* assumption true? ... */ + beq 1f /* ...yes! */ + mr r4,r25 /* ...no, use the slow variant */ + mr r25,r26 /* use this for the other flash */ +1: + mtdcr ebccfgd,r4 /* change timing now */ + + li r4,pb0cr /* PB0CR=Peripheral Bank 0 Control Register */ + mtdcr ebccfga,r4 + mfdcr r4,ebccfgd + lis r3,0x0001 + ori r3,r3,0x8000 /* allow reads and writes */ + or r4,r4,r3 + mtdcr ebccfgd,r4 + +/*----------------------------------------------------------------------- + * Memory Bank 3 (Second-Flash) initialization + * 0xF0000000...0xF01FFFFF -> 2MB + *----------------------------------------------------------------------- */ + + li r4,pb3ap /* Peripheral Bank 1 Access Parameter */ + mtdcr ebccfga,r4 + mtdcr ebccfgd,r2 /* change timing */ + + li r4,pb3cr /* Peripheral Bank 1 Configuration Registers */ + mtdcr ebccfga,r4 + + lis r4,0xF003 + ori r4,r4,0x8000 +/* + * Consider boot configuration + */ + xori r24,r24,0x2000 /* invert current bus width */ + or r4,r4,r24 + mtdcr ebccfgd,r4 + +/*----------------------------------------------------------------------- + * Memory Bank 1 (NAND-Flash) initialization + * 0x77D00000...0x77DFFFFF -> 1MB + * - the write/read pulse to the NAND can be as short as 25ns, bus the cycle time is always 50ns + * - the setup time is 0ns + * - the hold time is 15ns + * -> + * - TWT = 0 + * - CSN = 0 + * - OEN = 0 + * - WBN = 0 + * - WBF = 0 + * - TH = 1 + * ----> 2 clocks per cycle = 60ns cycle (30ns active, 30ns hold) + *----------------------------------------------------------------------- */ + + li r4,pb1ap /* Peripheral Bank 1 Access Parameter */ + mtdcr ebccfga,r4 + + lis r4,0x0000 + ori r4,r4,0x0200 + mtdcr ebccfgd,r4 + + li r4,pb1cr /* Peripheral Bank 1 Configuration Registers */ + mtdcr ebccfga,r4 + + lis r4,0x77D1 + ori r4,r4,0x8000 + mtdcr ebccfgd,r4 + + +/* USB init (without acceleration) */ +#ifndef CONFIG_ISP1161_PRESENT + li r4,pb4ap /* PB4AP=Peripheral Bank 4 Access Parameters */ + mtdcr ebccfga,r4 + lis r4,0x0180 + ori r4,r4,0x5940 + mtdcr ebccfgd,r4 +#endif + +/*----------------------------------------------------------------------- + * Memory Bank 2 (ISA Access) initialization (plus memory bank 6 and 7) + * 0x78000000...0x7BFFFFFF -> 64 MB + * Wir arbeiten bei 33 MHz -> 30ns + *----------------------------------------------------------------------- + + A7 (ppc notation) or A24 (standard notation) decides about + the type of access: + A7/A24=0 -> memory cycle + A7/ /A24=1 -> I/O cycle +*/ + li r4,pb2ap /* PB2AP=Peripheral Bank 2 Access Parameters */ + mtdcr ebccfga,r4 +/* + We emulate an ISA access + + 1. Address active + 2. wait 0 EBC clocks -> CSN=0 + 3. set CS# + 4. wait 0 EBC clock -> OEN/WBN=0 + 5. set OE#/WE# + 6. wait 4 clocks (ca. 90ns) and for Ready signal + 7. hold for 4 clocks -> TH=4 +*/ + +#if 1 +/* faster access to isa-bus */ + lis r4,0x0180 + ori r4,r4,0x5940 +#else + lis r4,0x0100 + ori r4,r4,0x0340 +#endif + mtdcr ebccfgd,r4 + +#ifdef IDE_USES_ISA_EMULATION + li r25,pb5ap /* PB5AP=Peripheral Bank 5 Access Parameters */ + mtdcr ebccfga,r25 + mtdcr ebccfgd,r4 +#endif + + li r25,pb6ap /* PB6AP=Peripheral Bank 6 Access Parameters */ + mtdcr ebccfga,r25 + mtdcr ebccfgd,r4 + li r25,pb7ap /* PB7AP=Peripheral Bank 7 Access Parameters */ + mtdcr ebccfga,r25 + mtdcr ebccfgd,r4 + + li r25,pb2cr /* PB2CR=Peripheral Bank 2 Configuration Register */ + mtdcr ebccfga,r25 + + lis r4,0x780B + ori r4,r4,0xA000 + mtdcr ebccfgd,r4 +/* + * the other areas are only 1MiB in size + */ + lis r4,0x7401 + ori r4,r4,0xA000 + + li r25,pb6cr /* PB6CR=Peripheral Bank 6 Configuration Register */ + mtdcr ebccfga,r25 + lis r4,0x7401 + ori r4,r4,0xA000 + mtdcr ebccfgd,r4 + + li r25,pb7cr /* PB7CR=Peripheral Bank 7 Configuration Register */ + mtdcr ebccfga,r25 + lis r4,0x7411 + ori r4,r4,0xA000 + mtdcr ebccfgd,r4 + +#ifndef CONFIG_ISP1161_PRESENT + li r25,pb4cr /* PB4CR=Peripheral Bank 4 Configuration Register */ + mtdcr ebccfga,r25 + lis r4,0x7421 + ori r4,r4,0xA000 + mtdcr ebccfgd,r4 +#endif +#ifdef IDE_USES_ISA_EMULATION + li r25,pb5cr /* PB5CR=Peripheral Bank 5 Configuration Register */ + mtdcr ebccfga,r25 + lis r4,0x0000 + ori r4,r4,0x0000 + mtdcr ebccfgd,r4 +#endif + +/*----------------------------------------------------------------------- + * Memory bank 4: USB controller Philips ISP6111 + * 0x77C00000 ... 0x77CFFFFF + * + * The chip is connected to: + * - CPU CS#4 + * - CPU IRQ#2 + * - CPU DMA 3 + * + * Timing: + * - command to first data: 300ns. Software must ensure this timing! + * - Write pulse: 26ns + * - Read pulse: 33ns + * - read cycle time: 150ns + * - write cycle time: 140ns + * + * Note: All calculations are based on 33MHz EBC clock. One '#' or '_' is 30ns + * + * |- 300ns --| + * |---- 420ns ---|---- 420ns ---| cycle + * CS ############:###____#######:###____####### + * OE ############:####___#######:####___####### + * WE ############:####__########:####__######## + * + * ----> 2 clocks RD/WR pulses: 60ns + * ----> CSN: 3 clock, 90ns + * ----> OEN: 1 clocks (read cycle) + * ----> WBN: 1 clocks (write cycle) + * ----> WBE: 2 clocks + * ----> TH: 7 clock, 210ns + * ----> TWT: 7 clocks + *----------------------------------------------------------------------- */ + +#ifdef CONFIG_ISP1161_PRESENT + + li r4,pb4ap /* PB4AP=Peripheral Bank 4 Access Parameters */ + mtdcr ebccfga,r4 + + lis r4,0x030D + ori r4,r4,0x5E80 + mtdcr ebccfgd,r4 + + li r4,pb4cr /* PB2CR=Peripheral Bank 4 Configuration Register */ + mtdcr ebccfga,r4 + + lis r4,0x77C1 + ori r4,r4,0xA000 + mtdcr ebccfgd,r4 + +#endif + +#ifndef IDE_USES_ISA_EMULATION + +/*----------------------------------------------------------------------- + * Memory Bank 5 used for IDE access + * + * Timings for IDE Interface + * + * SETUP / LENGTH / HOLD - cycles valid for 33.3 MHz clk -> 30ns cycle time + * 70 165 30 PIO-Mode 0, [ns] + * 3 6 1 [Cycles] ----> AP=0x040C0200 + * 50 125 20 PIO-Mode 1, [ns] + * 2 5 1 [Cycles] ----> AP=0x03080200 + * 30 100 15 PIO-Mode 2, [ns] + * 1 4 1 [Cycles] ----> AP=0x02040200 + * 30 80 10 PIO-Mode 3, [ns] + * 1 3 1 [Cycles] ----> AP=0x01840200 + * 25 70 10 PIO-Mode 4, [ns] + * 1 3 1 [Cycles] ----> AP=0x01840200 + * + *----------------------------------------------------------------------- */ + + li r4,pb5ap + mtdcr ebccfga,r4 + lis r4,0x040C + ori r4,r4,0x0200 + mtdcr ebccfgd,r4 + + li r4,pb5cr /* PB2CR=Peripheral Bank 2 Configuration Register */ + mtdcr ebccfga,r4 + + lis r4,0x7A01 + ori r4,r4,0xA000 + mtdcr ebccfgd,r4 +#endif +/* + * External Peripheral Control Register + */ + li r4,epcr + mtdcr ebccfga,r4 + + lis r4,0xB84E + ori r4,r4,0xF000 + mtdcr ebccfgd,r4 +/* + * drive POST code + */ + lis r4,0x7900 + ori r4,r4,0x0080 + li r3,0x0001 + stb r3,0(r4) /* 01 -> external bus controller is initialized */ + nop /* pass2 DCR errata #8 */ + blr diff --git a/board/sc3/sc3.c b/board/sc3/sc3.c new file mode 100644 index 000000000..363a77d8a --- /dev/null +++ b/board/sc3/sc3.c @@ -0,0 +1,781 @@ +/* + * (C) Copyright 2007 + * Heiko Schocher, DENX Software Engineering, <hs@denx.de>. + * + * (C) Copyright 2003 + * Juergen Beisert, EuroDesign embedded technologies, info@eurodsn.de + * Derived from walnut.c + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * $Log:$ + */ + +#include <common.h> +#include <asm/processor.h> +#include <asm/io.h> +#include "sc3.h" +#include <pci.h> +#include <i2c.h> +#include <malloc.h> + +#undef writel +#undef writeb +#define writeb(b,addr) ((*(volatile u8 *) (addr)) = (b)) +#define writel(b,addr) ((*(volatile u32 *) (addr)) = (b)) + +/* write only register to configure things in our CPLD */ +#define CPLD_CONTROL_1 0x79000102 +#define CPLD_VERSION 0x79000103 + +#define IS_CAMERON ((*(unsigned char *)(CPLD_VERSION)== 0x32) ? 1 : 0) + +static struct pci_controller hose={0,}; + +/************************************************************ + * Standard definition + ************************************************************/ + +/* CPC0_CR0 Function ISA bus + - GPIO0 + - GPIO1 -> Output: NAND-Command Latch Enable + - GPIO2 -> Output: NAND Address Latch Enable + - GPIO3 -> IRQ input ISA-IRQ #5 (through CPLD) + - GPIO4 -> Output: NAND-Chip Enable + - GPIO5 -> IRQ input ISA-IRQ#7 (through CPLD) + - GPIO6 -> IRQ input ISA-IRQ#9 (through CPLD) + - GPIO7 -> IRQ input ISA-IRQ#10 (through CPLD) + - GPIO8 -> IRQ input ISA-IRQ#11 (through CPLD) + - GPIO9 -> IRQ input ISA-IRQ#12 (through CPLD) + - GPIO10/CS1# -> CS1# NAND ISA-CS#0 + - GPIO11/CS2# -> CS2# ISA emulation ISA-CS#1 + - GPIO12/CS3# -> CS3# 2nd Flash-Bank ISA-CS#2 or ISA-CS#7 + - GPIO13/CS4# -> CS4# USB HC or ISA emulation ISA-CS#3 + - GPIO14/CS5# -> CS5# Boosted IDE access ISA-CS#4 + - GPIO15/CS6# -> CS6# ISA emulation ISA-CS#5 + - GPIO16/CS7# -> CS7# ISA emulation ISA-CS#6 + - GPIO17/IRQ0 -> GPIO, in, NAND-Ready/Busy# line ISA-IRQ#3 + - GPIO18/IRQ1 -> IRQ input ISA-IRQ#14 + - GPIO19/IRQ2 -> IRQ input or USB ISA-IRQ#4 + - GPIO20/IRQ3 -> IRQ input PCI-IRQ#D + - GPIO21/IRQ4 -> IRQ input PCI-IRQ#C + - GPIO22/IRQ5 -> IRQ input PCI-IRQ#B + - GPIO23/IRQ6 -> IRQ input PCI-IRQ#A + - GPIO24 -> if GPIO output: 0=JTAG CPLD activ, 1=JTAG CPLD inactiv +*/ +/* +| CPLD register: io-space at offset 0x102 (write only) +| 0 +| 1 +| 2 0=CS#4 USB CS#, 1=ISA or GP bus +| 3 +| 4 +| 5 +| 6 1=enable faster IDE access +| 7 +*/ +#define USB_CHIP_ENABLE 0x04 +#define IDE_BOOSTING 0x40 + +/* --------------- USB stuff ------------------------------------- */ +#ifdef CONFIG_ISP1161_PRESENT +/** + * initUsbHost- Initialize the Philips isp1161 HC part if present + * @cpldConfig: Pointer to value in write only CPLD register + * + * Initialize the USB host controller if present and fills the + * scratch register to inform the driver about used resources + */ + +static void initUsbHost (unsigned char *cpldConfig) +{ + int i; + unsigned long usbBase; + /* + * Read back where init.S has located the USB chip + */ + mtdcr (0x012, 0x04); + usbBase = mfdcr (0x013); + if (!(usbBase & 0x18000)) /* enabled? */ + return; + usbBase &= 0xFFF00000; + + /* + * to test for the USB controller enable using of CS#4 and DMA 3 for USB access + */ + writeb (*cpldConfig | USB_CHIP_ENABLE,CPLD_CONTROL_1); + + /* + * first check: is the controller assembled? + */ + hcWriteWord (usbBase, 0x5555, HcScratch); + if (hcReadWord (usbBase, HcScratch) == 0x5555) { + hcWriteWord (usbBase, 0xAAAA, HcScratch); + if (hcReadWord (usbBase, HcScratch) == 0xAAAA) { + if ((hcReadWord (usbBase, HcChipID) & 0xFF00) != 0x6100) + return; /* this is not our controller */ + /* + * try a software reset. This needs up to 10 seconds (see datasheet) + */ + hcWriteDWord (usbBase, 0x00000001, HcCommandStatus); + for (i = 1000; i > 0; i--) { /* loop up to 10 seconds */ + udelay (10); + if (!(hcReadDWord (usbBase, HcCommandStatus) & 0x01)) + break; + } + + if (!i) + return; /* the controller doesn't responding. Broken? */ + /* + * OK. USB controller is ready. Initialize it in such way the later driver + * can us it (without any knowing about specific implementation) + */ + hcWriteDWord (usbBase, 0x00000000, HcControl); + /* + * disable all interrupt sources. Because we + * don't know where we come from (hard reset, cold start, soft reset...) + */ + hcWriteDWord (usbBase, 0x8000007D, HcInterruptDisable); + /* + * our current setup hardware configuration + * - every port power supply can switched indepently + * - every port can signal overcurrent + * - every port is "outside" and the devices are removeable + */ + hcWriteDWord (usbBase, 0x32000902, HcRhDescriptorA); + hcWriteDWord (usbBase, 0x00060000, HcRhDescriptorB); + /* + * don't forget to switch off power supply of each port + * The later running driver can reenable them to find and use + * the (maybe) connected devices. + * + */ + hcWriteDWord (usbBase, 0x00000200, HcRhPortStatus1); + hcWriteDWord (usbBase, 0x00000200, HcRhPortStatus2); + hcWriteWord (usbBase, 0x0428, HcHardwareConfiguration); + hcWriteWord (usbBase, 0x0040, HcDMAConfiguration); + hcWriteWord (usbBase, 0x0000, HcuPInterruptEnable); + hcWriteWord (usbBase, 0xA000 | (0x03 << 8) | 27, HcScratch); + /* + * controller is present and usable + */ + *cpldConfig |= USB_CHIP_ENABLE; + } + } +} +#endif + +#if defined(CONFIG_START_IDE) +int board_start_ide(void) +{ + if (IS_CAMERON) { + puts ("no IDE on cameron board.\n"); + return 0; + } + return 1; +} +#endif + +static int sc3_cameron_init (void) +{ + /* Set up the Memory Controller for the CAMERON version */ + mtebc (pb4ap, 0x01805940); + mtebc (pb4cr, 0x7401a000); + mtebc (pb5ap, 0x01805940); + mtebc (pb5cr, 0x7401a000); + mtebc (pb6ap, 0x0); + mtebc (pb6cr, 0x0); + mtebc (pb7ap, 0x0); + mtebc (pb7cr, 0x0); + return 0; +} + +void sc3_read_eeprom (void) +{ + uchar i2c_buffer[18]; + + i2c_read (0x50, 0x03, 1, i2c_buffer, 9); + i2c_buffer[9] = 0; + setenv ("serial#", (char *)i2c_buffer); + + /* read mac-address from eeprom */ + i2c_read (0x50, 0x11, 1, i2c_buffer, 15); + i2c_buffer[17] = 0; + i2c_buffer[16] = i2c_buffer[14]; + i2c_buffer[15] = i2c_buffer[13]; + i2c_buffer[14] = ':'; + i2c_buffer[13] = i2c_buffer[12]; + i2c_buffer[12] = i2c_buffer[11]; + i2c_buffer[11] = ':'; + i2c_buffer[8] = ':'; + i2c_buffer[5] = ':'; + i2c_buffer[2] = ':'; + setenv ("ethaddr", (char *)i2c_buffer); +} + +int board_early_init_f (void) +{ + /* write only register to configure things in our CPLD */ + unsigned char cpldConfig_1=0x00; + +/*-------------------------------------------------------------------------+ +| Interrupt controller setup for the SolidCard III CPU card (plus Evaluation board). +| +| Note: IRQ 0 UART 0, active high; level sensitive +| IRQ 1 UART 1, active high; level sensitive +| IRQ 2 IIC, active high; level sensitive +| IRQ 3 Ext. master, rising edge, edge sensitive +| IRQ 4 PCI, active high; level sensitive +| IRQ 5 DMA Channel 0, active high; level sensitive +| IRQ 6 DMA Channel 1, active high; level sensitive +| IRQ 7 DMA Channel 2, active high; level sensitive +| IRQ 8 DMA Channel 3, active high; level sensitive +| IRQ 9 Ethernet Wakeup, active high; level sensitive +| IRQ 10 MAL System Error (SERR), active high; level sensitive +| IRQ 11 MAL Tx End of Buffer, active high; level sensitive +| IRQ 12 MAL Rx End of Buffer, active high; level sensitive +| IRQ 13 MAL Tx Descriptor Error, active high; level sensitive +| IRQ 14 MAL Rx Descriptor Error, active high; level sensitive +| IRQ 15 Ethernet, active high; level sensitive +| IRQ 16 External PCI SERR, active high; level sensitive +| IRQ 17 ECC Correctable Error, active high; level sensitive +| IRQ 18 PCI Power Management, active high; level sensitive +| +| IRQ 19 (EXT IRQ7 405GPr only) +| IRQ 20 (EXT IRQ8 405GPr only) +| IRQ 21 (EXT IRQ9 405GPr only) +| IRQ 22 (EXT IRQ10 405GPr only) +| IRQ 23 (EXT IRQ11 405GPr only) +| IRQ 24 (EXT IRQ12 405GPr only) +| +| IRQ 25 (EXT IRQ 0) NAND-Flash R/B# (raising edge means flash is ready) +| IRQ 26 (EXT IRQ 1) IDE0 interrupt (x86 = IRQ14). Active high (edge sensitive) +| IRQ 27 (EXT IRQ 2) USB controller +| IRQ 28 (EXT IRQ 3) INT D, VGA; active low; level sensitive +| IRQ 29 (EXT IRQ 4) INT C, Ethernet; active low; level sensitive +| IRQ 30 (EXT IRQ 5) INT B, PC104+ SLOT; active low; level sensitive +| IRQ 31 (EXT IRQ 6) INT A, PC104+ SLOT; active low; level sensitive +| +| Direct Memory Access Controller Signal Polarities +| DRQ0 active high (like ISA) +| ACK0 active low (like ISA) +| EOT0 active high (like ISA) +| DRQ1 active high (like ISA) +| ACK1 active low (like ISA) +| EOT1 active high (like ISA) +| DRQ2 active high (like ISA) +| ACK2 active low (like ISA) +| EOT2 active high (like ISA) +| DRQ3 active high (like ISA) +| ACK3 active low (like ISA) +| EOT3 active high (like ISA) +| ++-------------------------------------------------------------------------*/ + + writeb (cpldConfig_1, CPLD_CONTROL_1); /* disable everything in CPLD */ + + mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr (uicer, 0x00000000); /* disable all ints */ + mtdcr (uiccr, 0x00000000); /* set all to be non-critical */ + + if (IS_CAMERON) { + sc3_cameron_init(); + mtdcr (0x0B6, 0x18000000); + mtdcr (uicpr, 0xFFFFFFF0); + mtdcr (uictr, 0x10001030); + } else { + mtdcr (0x0B6, 0x0000000); + mtdcr (uicpr, 0xFFFFFFE0); + mtdcr (uictr, 0x10000020); + } + mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ + mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + + /* setup other implementation specific details */ + mtdcr (ecr, 0x60606000); + + mtdcr (cntrl1, 0x000042C0); + + if (IS_CAMERON) { + mtdcr (cntrl0, 0x01380000); + /* Setup the GPIOs */ + writel (0x08008000, 0xEF600700); /* Output states */ + writel (0x00000000, 0xEF600718); /* Open Drain control */ + writel (0x68098000, 0xEF600704); /* Output control */ + } else { + mtdcr (cntrl0,0x00080000); + /* Setup the GPIOs */ + writel (0x08000000, 0xEF600700); /* Output states */ + writel (0x14000000, 0xEF600718); /* Open Drain control */ + writel (0x7C000000, 0xEF600704); /* Output control */ + } + + /* Code decompression disabled */ + mtdcr (kiar, kconf); + mtdcr (kidr, 0x2B); + + /* CPC0_ER: enable sleep mode of (currently) unused components */ + /* CPC0_FR: force unused components into sleep mode */ + mtdcr (cpmer, 0x3F800000); + mtdcr (cpmfr, 0x14000000); + + /* set PLB priority */ + mtdcr (0x87, 0x08000000); + + /* --------------- DMA stuff ------------------------------------- */ + mtdcr (0x126, 0x49200000); + +#ifndef IDE_USES_ISA_EMULATION + cpldConfig_1 |= IDE_BOOSTING; /* enable faster IDE */ + /* cpldConfig |= 0x01; */ /* enable 8.33MHz output, if *not* present on your baseboard */ + writeb (cpldConfig_1, CPLD_CONTROL_1); +#endif + +#ifdef CONFIG_ISP1161_PRESENT + initUsbHost (&cpldConfig_1); + writeb (cpldConfig_1, CPLD_CONTROL_1); +#endif + /* FIXME: for what must we do this */ + *(unsigned long *)0x79000080 = 0x0001; + return(0); +} + +int misc_init_r (void) +{ + char *s1; + int i, xilinx_val; + volatile char *xilinx_adr; + xilinx_adr = (char *)0x79000102; + + *xilinx_adr = 0x00; + +/* customer settings ***************************************** */ +/* + s1 = getenv ("function"); + if (s1) { + if (!strcmp (s1, "Rosho")) { + printf ("function 'Rosho' activated\n"); + *xilinx_adr = 0x40; + } + else { + printf (">>>>>>>>>> function %s not recognized\n",s1); + } + } +*/ + +/* individual settings ***************************************** */ + if ((s1 = getenv ("xilinx"))) { + i=0; + xilinx_val = 0; + while (i < 3 && s1[i]) { + if (s1[i] >= '0' && s1[i] <= '9') + xilinx_val = (xilinx_val << 4) + s1[i] - '0'; + else + if (s1[i] >= 'A' && s1[i] <= 'F') + xilinx_val = (xilinx_val << 4) + s1[i] - 'A' + 10; + else + if (s1[i] >= 'a' && s1[i] <= 'f') + xilinx_val = (xilinx_val << 4) + s1[i] - 'a' + 10; + else { + xilinx_val = -1; + break; + } + i++; + } + if (xilinx_val >= 0 && xilinx_val <=255 && i < 3) { + printf ("Xilinx: set to %s\n", s1); + *xilinx_adr = (unsigned char) xilinx_val; + } else + printf ("Xilinx: rejected value %s\n", s1); + } + return 0; +} + +/* ------------------------------------------------------------------------- + * printCSConfig + * + * Print some informations about chips select configurations + * Only used while debugging. + * + * Params: + * - No. of CS pin + * - AP of this CS + * - CR of this CS + * + * Returns + * nothing + ------------------------------------------------------------------------- */ + +#ifdef SC3_DEBUGOUT +static void printCSConfig(int reg,unsigned long ap,unsigned long cr) +{ + const char *bsize[4] = {"8","16","32","?"}; + const unsigned char banks[8] = {1, 2, 4, 8, 16, 32, 64, 128}; + const char *bankaccess[4] = {"disabled", "RO", "WO", "RW"}; + +#define CYCLE 30 /* time of one clock (based on 33MHz) */ + + printf("\nCS#%d",reg); + if (!(cr & 0x00018000)) + puts(" unused"); + else { + if (((cr&0xFFF00000U) & ((banks[(cr & 0x000E0000) >> 17]-1) << 20))) + puts(" Address is not multiple of bank size!"); + + printf("\n -%s bit device", + bsize[(cr & 0x00006000) >> 13]); + printf(" at 0x%08lX", cr & 0xFFF00000U); + printf(" size: %u MB", banks[(cr & 0x000E0000) >> 17]); + printf(" rights: %s", bankaccess[(cr & 0x00018000) >> 15]); + if (ap & 0x80000000) { + printf("\n -Burst device (%luns/%luns)", + (((ap & 0x7C000000) >> 26) + 1) * CYCLE, + (((ap & 0x03800000) >> 23) + 1) * CYCLE); + } else { + printf("\n -Non burst device, active cycle %luns", + (((ap & 0x7F800000) >> 23) + 1) * CYCLE); + printf("\n -Address setup %luns", + ((ap & 0xC0000) >> 18) * CYCLE); + printf("\n -CS active to RD %luns/WR %luns", + ((ap & 0x30000) >> 16) * CYCLE, + ((ap & 0xC000) >> 14) * CYCLE); + printf("\n -WR to CS inactive %luns", + ((ap & 0x3000) >> 12) * CYCLE); + printf("\n -Hold after access %luns", + ((ap & 0xE00) >> 9) * CYCLE); + printf("\n -Ready is %sabled", + ap & 0x100 ? "en" : "dis"); + } + } +} +#endif + +#ifdef SC3_DEBUGOUT + +static unsigned int ap[] = {pb0ap, pb1ap, pb2ap, pb3ap, pb4ap, + pb5ap, pb6ap, pb7ap}; +static unsigned int cr[] = {pb0cr, pb1cr, pb2cr, pb3cr, pb4cr, + pb5cr, pb6cr, pb7cr}; + +static int show_reg (int nr) +{ + unsigned long ul1, ul2; + + mtdcr (ebccfga, ap[nr]); + ul1 = mfdcr (ebccfgd); + mtdcr (ebccfga, cr[nr]); + ul2 = mfdcr(ebccfgd); + printCSConfig(nr, ul1, ul2); + return 0; +} +#endif + +int checkboard (void) +{ +#ifdef SC3_DEBUGOUT + unsigned long ul1; + int i; + + for (i = 0; i < 8; i++) { + show_reg (i); + } + + mtdcr (ebccfga, epcr); + ul1 = mfdcr (ebccfgd); + + puts ("\nGeneral configuration:\n"); + + if (ul1 & 0x80000000) + printf(" -External Bus is always driven\n"); + + if (ul1 & 0x400000) + printf(" -CS signals are always driven\n"); + + if (ul1 & 0x20000) + printf(" -PowerDown after %lu clocks\n", + (ul1 & 0x1F000) >> 7); + + switch (ul1 & 0xC0000) + { + case 0xC0000: + printf(" -No external master present\n"); + break; + case 0x00000: + printf(" -8 bit external master present\n"); + break; + case 0x40000: + printf(" -16 bit external master present\n"); + break; + case 0x80000: + printf(" -32 bit external master present\n"); + break; + } + + switch (ul1 & 0x300000) + { + case 0x300000: + printf(" -Prefetch: Illegal setting!\n"); + break; + case 0x000000: + printf(" -1 doubleword prefetch\n"); + break; + case 0x100000: + printf(" -2 doublewords prefetch\n"); + break; + case 0x200000: + printf(" -4 doublewords prefetch\n"); + break; + } + putc ('\n'); +#endif + printf("Board: SolidCard III %s %s version.\n", + (IS_CAMERON ? "Cameron" : "Eurodesign"), CONFIG_SC3_VERSION); + return 0; +} + +static int printSDRAMConfig(char reg, unsigned long cr) +{ + const int bisize[8]={4, 8, 16, 32, 64, 128, 256, 0}; +#ifdef SC3_DEBUGOUT + const char *basize[8]= + {"4", "8", "16", "32", "64", "128", "256", "Reserved"}; + + printf("SDRAM bank %d",reg); + + if (!(cr & 0x01)) + puts(" disabled\n"); + else { + printf(" at 0x%08lX, size %s MB",cr & 0xFFC00000,basize[(cr&0xE0000)>>17]); + printf(" mode %lu\n",((cr & 0xE000)>>13)+1); + } +#endif + + if (cr & 0x01) + return(bisize[(cr & 0xE0000) >> 17]); + + return 0; +} + +#ifdef SC3_DEBUGOUT +static unsigned int mbcf[] = {mem_mb0cf, mem_mb1cf, mem_mb2cf, mem_mb3cf}; +#endif + +long int initdram (int board_type) +{ + unsigned int mems=0; + unsigned long ul1; + +#ifdef SC3_DEBUGOUT + unsigned long ul2; + int i; + + puts("\nSDRAM configuration:\n"); + + mtdcr (memcfga, mem_mcopt1); + ul1 = mfdcr(memcfgd); + + if (!(ul1 & 0x80000000)) { + puts(" Controller disabled\n"); + return 0; + } + for (i = 0; i < 4; i++) { + mtdcr (memcfga, mbcf[i]); + ul1 = mfdcr (memcfgd); + mems += printSDRAMConfig (i, ul1); + } + + mtdcr (memcfga, mem_sdtr1); + ul1 = mfdcr(memcfgd); + + printf ("Timing:\n -CAS latency %lu\n", ((ul1 & 0x1800000) >> 23)+1); + printf (" -Precharge %lu (PTA) \n", ((ul1 & 0xC0000) >> 18) + 1); + printf (" -R/W to Precharge %lu (CTP)\n", ((ul1 & 0x30000) >> 16) + 1); + printf (" -Leadoff %lu\n", ((ul1 & 0xC000) >> 14) + 1); + printf (" -CAS to RAS %lu\n", ((ul1 & 0x1C) >> 2) + 4); + printf (" -RAS to CAS %lu\n", ((ul1 & 0x3) + 1)); + puts ("Misc:\n"); + mtdcr (memcfga, mem_rtr); + ul1 = mfdcr(memcfgd); + printf (" -Refresh rate: %luns\n", (ul1 >> 16) * 7); + + mtdcr(memcfga,mem_pmit); + ul2=mfdcr(memcfgd); + + mtdcr(memcfga,mem_mcopt1); + ul1=mfdcr(memcfgd); + + if (ul1 & 0x20000000) + printf(" -Power Down after: %luns\n", + ((ul2 & 0xFFC00000) >> 22) * 7); + else + puts(" -Power Down disabled\n"); + + if (ul1 & 0x40000000) + printf(" -Self refresh feature active\n"); + else + puts(" -Self refresh disabled\n"); + + if (ul1 & 0x10000000) + puts(" -ECC enabled\n"); + else + puts(" -ECC disabled\n"); + + if (ul1 & 0x8000000) + puts(" -Using registered SDRAM\n"); + + if (!(ul1 & 0x6000000)) + puts(" -Using 32 bit data width\n"); + else + puts(" -Illegal data width!\n"); + + if (ul1 & 0x400000) + puts(" -ECC drivers inactive\n"); + else + puts(" -ECC drivers active\n"); + + if (ul1 & 0x200000) + puts(" -Memory lines always active outputs\n"); + else + puts(" -Memory lines only at write cycles active outputs\n"); + + mtdcr (memcfga, mem_status); + ul1 = mfdcr (memcfgd); + if (ul1 & 0x80000000) + puts(" -SDRAM Controller ready\n"); + else + puts(" -SDRAM Controller not ready\n"); + + if (ul1 & 0x4000000) + puts(" -SDRAM in self refresh mode!\n"); + + return (mems * 1024 * 1024); +#else + mtdcr (memcfga, mem_mb0cf); + ul1 = mfdcr (memcfgd); + mems = printSDRAMConfig (0, ul1); + + mtdcr (memcfga, mem_mb1cf); + ul1 = mfdcr (memcfgd); + mems += printSDRAMConfig (1, ul1); + + mtdcr (memcfga, mem_mb2cf); + ul1 = mfdcr(memcfgd); + mems += printSDRAMConfig (2, ul1); + + mtdcr (memcfga, mem_mb3cf); + ul1 = mfdcr(memcfgd); + mems += printSDRAMConfig (3, ul1); + + return (mems * 1024 * 1024); +#endif +} + +static void pci_solidcard3_fixup_irq (struct pci_controller *hose, pci_dev_t dev) +{ +/*-------------------------------------------------------------------------+ + | ,-. ,-. ,-. ,-. ,-. + | INTD# ----|B|-----|P|-. ,-|P|-. ,-| |-. ,-|G| + | |R| |C| \ / |C| \ / |E| \ / |r| + | INTC# ----|I|-----|1|-. `/---|1|-. `/---|t|-. `/---|a| + | |D| |0| \/ |0| \/ |h| \/ |f| + | INTB# ----|G|-----|4|-./`----|4|-./`----|e|-./`----|i| + | |E| |+| /\ |+| /\ |r| /\ |k| + | INTA# ----| |-----| |- `----| |- `----| |- `----| | + | `-' `-' `-' `-' `-' + | Slot 0 10 11 12 13 + | REQ# 0 1 2 * + | GNT# 0 1 2 * + +-------------------------------------------------------------------------*/ + unsigned char int_line = 0xff; + + switch (PCI_DEV(dev)) { + case 10: + int_line = 31; /* INT A */ + POST_OUT(0x42); + break; + + case 11: + int_line = 30; /* INT B */ + POST_OUT(0x43); + break; + + case 12: + int_line = 29; /* INT C */ + POST_OUT(0x44); + break; + + case 13: + int_line = 28; /* INT D */ + POST_OUT(0x45); + break; + } + pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, int_line); +} + +extern void pci_405gp_init(struct pci_controller *hose); +extern void pci_405gp_fixup_irq(struct pci_controller *hose, pci_dev_t dev); +extern void pci_405gp_setup_bridge(struct pci_controller *hose, pci_dev_t dev,struct pci_config_table *entry); +/* + * The following table is used when there is a special need to setup a PCI device. + * For every PCI device found in this table is called the given init function with given + * parameters. So never let all IDs at PCI_ANY_ID. In this case any found device gets the same + * parameters! + * +*/ +static struct pci_config_table pci_solidcard3_config_table[] = +{ +/* Host to PCI Bridge device (405GP) */ + { + vendor: 0x1014, + device: 0x0156, + class: PCI_CLASS_BRIDGE_HOST, + bus: 0, + dev: 0, + func: 0, + config_device: pci_405gp_setup_bridge + }, + { } +}; + +/*-------------------------------------------------------------------------+ + | pci_init_board (Called from pci_init() in drivers/pci.c) + | + | Init the PCI part of the SolidCard III + | + | Params: + * - Pointer to current PCI hose + * - Current Device + * + * Returns + * nothing + +-------------------------------------------------------------------------*/ + +void pci_init_board(void) +{ + POST_OUT(0x41); +/* + * we want the ptrs to RAM not flash (ie don't use init list) + */ + hose.fixup_irq = pci_solidcard3_fixup_irq; + hose.config_table = pci_solidcard3_config_table; + pci_405gp_init(&hose); +} diff --git a/board/sc3/sc3.h b/board/sc3/sc3.h new file mode 100644 index 000000000..cf920f9f5 --- /dev/null +++ b/board/sc3/sc3.h @@ -0,0 +1,117 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/** + * hcWriteWord - write a 16 bit value into the USB controller + * @base: base address to access the chip registers + * @value: 16 bit value to write into register @offset + * @offset: register to write the @value into + * + */ +static void inline hcWriteWord (unsigned long base, unsigned int value, + unsigned int offset) +{ + out_le16 ((volatile u16*)(base + 2), offset | 0x80); + out_le16 ((volatile u16*)base, value); +} + +/** + * hcWriteDWord - write a 32 bit value into the USB controller + * @base: base address to access the chip registers + * @value: 32 bit value to write into register @offset + * @offset: register to write the @value into + * + */ + +static void inline hcWriteDWord (unsigned long base, unsigned long value, + unsigned int offset) +{ + out_le16 ((volatile u16*)(base + 2), offset | 0x80); + out_le16 ((volatile u16*)base, value); + out_le16 ((volatile u16*)base, value >> 16); +} + +/** + * hcReadWord - read a 16 bit value from the USB controller + * @base: base address to access the chip registers + * @offset: register to read from + * + * Returns the readed register value + */ + +static unsigned int inline hcReadWord (unsigned long base, unsigned int offset) +{ + out_le16 ((volatile u16*)(base + 2), offset); + return (in_le16 ((volatile u16*)base)); +} + +/** + * hcReadDWord - read a 32 bit value from the USB controller + * @base: base address to access the chip registers + * @offset: register to read from + * + * Returns the readed register value + */ + +static unsigned long inline hcReadDWord (unsigned long base, unsigned int offset) +{ + unsigned long val, val16; + + out_le16 ((volatile u16*)(base + 2), offset); + val = in_le16((volatile u16*)base); + val16 = in_le16((volatile u16*)base); + return (val | (val16 << 16)); +} + +/* control and status registers isp1161 */ +#define HcRevision 0x00 +#define HcControl 0x01 +#define HcCommandStatus 0x02 +#define HcInterruptStatus 0x03 +#define HcInterruptEnable 0x04 +#define HcInterruptDisable 0x05 +#define HcFmInterval 0x0D +#define HcFmRemaining 0x0E +#define HcFmNumber 0x0F +#define HcLSThreshold 0x11 +#define HcRhDescriptorA 0x12 +#define HcRhDescriptorB 0x13 +#define HcRhStatus 0x14 +#define HcRhPortStatus1 0x15 +#define HcRhPortStatus2 0x16 + +#define HcHardwareConfiguration 0x20 +#define HcDMAConfiguration 0x21 +#define HcTransferCounter 0x22 +#define HcuPInterrupt 0x24 +#define HcuPInterruptEnable 0x25 +#define HcChipID 0x27 +#define HcScratch 0x28 +#define HcSoftwareReset 0x29 +#define HcITLBufferLength 0x2A +#define HcATLBufferLength 0x2B +#define HcBufferStatus 0x2C +#define HcReadBackITL0Length 0x2D +#define HcReadBackITL1Length 0x2E +#define HcITLBufferPort 0x40 +#define HcATLBufferPort 0x41 diff --git a/board/sc3/sc3nand.c b/board/sc3/sc3nand.c new file mode 100644 index 000000000..7daa877cd --- /dev/null +++ b/board/sc3/sc3nand.c @@ -0,0 +1,94 @@ +/* + * (C) Copyright 2007 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#if (CONFIG_COMMANDS & CFG_CMD_NAND) + +#include <nand.h> +#include <asm/processor.h> + +#define readb(addr) *(volatile u_char *)(addr) +#define readl(addr) *(volatile u_long *)(addr) +#define writeb(d,addr) *(volatile u_char *)(addr) = (d) + +#define SC3_NAND_ALE 29 /* GPIO PIN 3 */ +#define SC3_NAND_CLE 30 /* GPIO PIN 2 */ +#define SC3_NAND_CE 27 /* GPIO PIN 5 */ + +static void *sc3_io_base; +static void *sc3_control_base = (void *)0xEF600700; + +static void sc3_nand_hwcontrol(struct mtd_info *mtd, int cmd) +{ + switch (cmd) { + case NAND_CTL_SETCLE: + set_bit (SC3_NAND_CLE, sc3_control_base); + break; + case NAND_CTL_CLRCLE: + clear_bit (SC3_NAND_CLE, sc3_control_base); + break; + + case NAND_CTL_SETALE: + set_bit (SC3_NAND_ALE, sc3_control_base); + break; + case NAND_CTL_CLRALE: + clear_bit (SC3_NAND_ALE, sc3_control_base); + break; + + case NAND_CTL_SETNCE: + set_bit (SC3_NAND_CE, sc3_control_base); + break; + case NAND_CTL_CLRNCE: + clear_bit (SC3_NAND_CE, sc3_control_base); + break; + } +} + +static int sc3_nand_dev_ready(struct mtd_info *mtd) +{ + if (!(readl(sc3_control_base + 0x1C) & 0x4000)) + return 0; + return 1; +} + +static void sc3_select_chip(struct mtd_info *mtd, int chip) +{ + clear_bit (SC3_NAND_CE, sc3_control_base); +} + +int board_nand_init(struct nand_chip *nand) +{ + nand->eccmode = NAND_ECC_SOFT; + + sc3_io_base = (void *) CFG_NAND_BASE; + /* Set address of NAND IO lines (Using Linear Data Access Region) */ + nand->IO_ADDR_R = (void __iomem *) sc3_io_base; + nand->IO_ADDR_W = (void __iomem *) sc3_io_base; + /* Reference hardware control function */ + nand->hwcontrol = sc3_nand_hwcontrol; + nand->dev_ready = sc3_nand_dev_ready; + nand->select_chip = sc3_select_chip; + return 0; +} +#endif diff --git a/board/sc3/u-boot.lds b/board/sc3/u-boot.lds new file mode 100644 index 000000000..dc255d283 --- /dev/null +++ b/board/sc3/u-boot.lds @@ -0,0 +1,150 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + .resetvec 0xFFFFFFFC : + { + *(.resetvec) + } = 0xffff + + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/ppc4xx/start.o (.text) + board/sc3/init.o (.text) + cpu/ppc4xx/kgdb.o (.text) + cpu/ppc4xx/traps.o (.text) + cpu/ppc4xx/interrupts.o (.text) + cpu/ppc4xx/serial.o (.text) + cpu/ppc4xx/cpu_init.o (.text) + cpu/ppc4xx/speed.o (.text) + common/dlmalloc.o (.text) + lib_generic/crc32.o (.text) + lib_ppc/extable.o (.text) + lib_generic/zlib.o (.text) + +/* . = env_offset;*/ +/* common/environment.o(.text)*/ + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/spc1920/Makefile b/board/spc1920/Makefile index 424ab1cf9..0c48c3aee 100644 --- a/board/spc1920/Makefile +++ b/board/spc1920/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o +COBJS = $(BOARD).o hpi.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/spc1920/hpi.c b/board/spc1920/hpi.c new file mode 100644 index 000000000..3c36f7911 --- /dev/null +++ b/board/spc1920/hpi.c @@ -0,0 +1,603 @@ +/* + * (C) Copyright 2006 + * Markus Klotzbuecher, DENX Software Engineering, mk@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Host Port Interface (HPI) + */ + +/* debug levels: + * 0 : errors + * 1 : usefull info + * 2 : lots of info + * 3 : noisy + */ + +#define DEBUG 0 + +#include <config.h> +#include <common.h> +#include <mpc8xx.h> + +#include "pld.h" +#include "hpi.h" + +#define _NOT_USED_ 0xFFFFFFFF + +/* original table: + * - inserted loops to achieve long CS low and high Periods (~217ns) + * - move cs high 2/4 to the right + */ +const uint dsp_table_slow[] = +{ + /* single read (offset 0x00 in upm ram) */ + 0x8fffdc04, 0x0fffdc84, 0x0fffdc84, 0x0fffdc00, + 0x3fffdc04, 0xffffdc84, 0xffffdc84, 0xffffdc05, + + /* burst read (offset 0x08 in upm ram) */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + + /* single write (offset 0x18 in upm ram) */ + 0x8fffd004, 0x0fffd084, 0x0fffd084, 0x3fffd000, + 0xffffd084, 0xffffd084, 0xffffd005, _NOT_USED_, + + /* burst write (offset 0x20 in upm ram) */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + /* refresh (offset 0x30 in upm ram) */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + /* exception (offset 0x3C in upm ram) */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, +}; + +/* dsp hpi upm ram table + * works fine for noninc access, failes on incremental. + * - removed first word + */ +const uint dsp_table_fast[] = +{ + /* single read (offset 0x00 in upm ram) */ + 0x8fffdc04, 0x0fffdc04, 0x0fffdc00, 0x3fffdc04, + 0xffffdc05, _NOT_USED_, _NOT_USED_, _NOT_USED_, + + /* burst read (offset 0x08 in upm ram) */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + + /* single write (offset 0x18 in upm ram) */ + 0x8fffd004, 0x0fffd004, 0x3fffd000, 0xffffd005, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + + /* burst write (offset 0x20 in upm ram) */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + /* refresh (offset 0x30 in upm ram) */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + /* exception (offset 0x3C in upm ram) */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, +}; + + +#ifdef CONFIG_SPC1920_HPI_TEST +#undef HPI_TEST_OSZI + +#define HPI_TEST_CHUNKSIZE 0x1000 +#define HPI_TEST_PATTERN 0x00000000 +#define HPI_TEST_START 0x0 +#define HPI_TEST_END 0x30000 + +#define TINY_AUTOINC_DATA_SIZE 16 /* 32bit words */ +#define TINY_AUTOINC_BASE_ADDR 0x0 + +static int hpi_activate(void); +static void hpi_inactivate(void); +static void dsp_reset(void); + +static int hpi_write_inc(u32 addr, u32 *data, u32 count); +static int hpi_read_inc(u32 addr, u32 *buf, u32 count); +static int hpi_write_noinc(u32 addr, u32 data); +static u32 hpi_read_noinc(u32 addr); + +int hpi_test(void); +static int hpi_write_addr_test(u32 addr); +static int hpi_read_write_test(u32 addr, u32 data); +static int hpi_tiny_autoinc_test(void); +#endif /* CONFIG_SPC1920_HPI_TEST */ + + +/* init the host port interface on UPMA */ +int hpi_init(void) +{ + volatile immap_t *immr = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immr->im_memctl; + volatile spc1920_pld_t *pld = (spc1920_pld_t *) CFG_SPC1920_PLD_BASE; + + upmconfig(UPMA, (uint *)dsp_table_slow, sizeof(dsp_table_slow)/sizeof(uint)); + udelay(100); + + memctl->memc_mamr = CFG_MAMR; + memctl->memc_or3 = CFG_OR3; + memctl->memc_br3 = CFG_BR3; + + /* reset dsp */ + dsp_reset(); + + /* activate hpi switch*/ + pld->dsp_hpi_on = 0x1; + + udelay(100); + + return 0; +} + +#ifdef CONFIG_SPC1920_HPI_TEST +/* activate the Host Port interface */ +static int hpi_activate(void) +{ + volatile spc1920_pld_t *pld = (spc1920_pld_t *) CFG_SPC1920_PLD_BASE; + + /* turn on hpi */ + pld->dsp_hpi_on = 0x1; + + udelay(5); + + /* turn on the power EN_DSP_POWER high*/ + /* currently always on TBD */ + + /* setup hpi control register */ + HPI_HPIC_1 = (u16) 0x0008; + HPI_HPIC_2 = (u16) 0x0008; + + udelay(100); + + return 0; +} + +/* turn off the host port interface */ +static void hpi_inactivate(void) +{ + volatile spc1920_pld_t *pld = (spc1920_pld_t *) CFG_SPC1920_PLD_BASE; + + /* deactivate hpi */ + pld->dsp_hpi_on = 0x0; + + /* reset the dsp */ + /* pld->dsp_reset = 0x0; */ + + /* turn off the power EN_DSP_POWER# high*/ + /* currently always on TBD */ + +} + +/* reset the DSP */ +static void dsp_reset(void) +{ + volatile spc1920_pld_t *pld = (spc1920_pld_t *) CFG_SPC1920_PLD_BASE; + pld->dsp_reset = 0x1; + pld->dsp_hpi_on = 0x0; + + udelay(300000); + + pld->dsp_reset = 0x0; + pld->dsp_hpi_on = 0x1; +} + + +/* write using autoinc (count is number of 32bit words) */ +static int hpi_write_inc(u32 addr, u32 *data, u32 count) +{ + int i; + u16 addr1, addr2; + + addr1 = (u16) ((addr >> 16) & 0xffff); /* First HW is most significant */ + addr2 = (u16) (addr & 0xffff); + + /* write address */ + HPI_HPIA_1 = addr1; + HPI_HPIA_2 = addr2; + + debugX(4, "writing from data=0x%x to 0x%x\n", data, (data+count)); + + for(i=0; i<count; i++) { + HPI_HPID_INC_1 = (u16) ((data[i] >> 16) & 0xffff); + HPI_HPID_INC_2 = (u16) (data[i] & 0xffff); + debugX(4, "hpi_write_inc: data1=0x%x, data2=0x%x\n", + (u16) ((data[i] >> 16) & 0xffff), + (u16) (data[i] & 0xffff)); + } +#if 0 + while(data_ptr < (u16*) (data + count)) { + HPI_HPID_INC_1 = *(data_ptr++); + HPI_HPID_INC_2 = *(data_ptr++); + } +#endif + + /* return number of bytes written */ + return count; +} + +/* + * read using autoinc (count is number of 32bit words) + */ +static int hpi_read_inc(u32 addr, u32 *buf, u32 count) +{ + int i; + u16 addr1, addr2, data1, data2; + + addr1 = (u16) ((addr >> 16) & 0xffff); /* First HW is most significant */ + addr2 = (u16) (addr & 0xffff); + + /* write address */ + HPI_HPIA_1 = addr1; + HPI_HPIA_2 = addr2; + + for(i=0; i<count; i++) { + data1 = HPI_HPID_INC_1; + data2 = HPI_HPID_INC_2; + debugX(4, "hpi_read_inc: data1=0x%x, data2=0x%x\n", data1, data2); + buf[i] = (((u32) data1) << 16) | (data2 & 0xffff); + } + +#if 0 + while(buf_ptr < (u16*) (buf + count)) { + *(buf_ptr++) = HPI_HPID_INC_1; + *(buf_ptr++) = HPI_HPID_INC_2; + } +#endif + + /* return number of bytes read */ + return count; +} + + +/* write to non- auto inc regs */ +static int hpi_write_noinc(u32 addr, u32 data) +{ + + u16 addr1, addr2, data1, data2; + + addr1 = (u16) ((addr >> 16) & 0xffff); /* First HW is most significant */ + addr2 = (u16) (addr & 0xffff); + + /* printf("hpi_write_noinc: addr1=0x%x, addr2=0x%x\n", addr1, addr2); */ + + HPI_HPIA_1 = addr1; + HPI_HPIA_2 = addr2; + + data1 = (u16) ((data >> 16) & 0xffff); + data2 = (u16) (data & 0xffff); + + /* printf("hpi_write_noinc: data1=0x%x, data2=0x%x\n", data1, data2); */ + + HPI_HPID_NOINC_1 = data1; + HPI_HPID_NOINC_2 = data2; + + return 0; +} + +/* read from non- auto inc regs */ +static u32 hpi_read_noinc(u32 addr) +{ + u16 addr1, addr2, data1, data2; + u32 ret; + + addr1 = (u16) ((addr >> 16) & 0xffff); /* First HW is most significant */ + addr2 = (u16) (addr & 0xffff); + + HPI_HPIA_1 = addr1; + HPI_HPIA_2 = addr2; + + /* printf("hpi_read_noinc: addr1=0x%x, addr2=0x%x\n", addr1, addr2); */ + + data1 = HPI_HPID_NOINC_1; + data2 = HPI_HPID_NOINC_2; + + /* printf("hpi_read_noinc: data1=0x%x, data2=0x%x\n", data1, data2); */ + + ret = (((u32) data1) << 16) | (data2 & 0xffff); + return ret; + +} + +/* + * Host Port Interface Tests + */ + +#ifndef HPI_TEST_OSZI +/* main test function */ +int hpi_test(void) +{ + int err = 0; + u32 i, ii, pattern, tmp; + + pattern = HPI_TEST_PATTERN; + + u32 test_data[HPI_TEST_CHUNKSIZE]; + u32 read_data[HPI_TEST_CHUNKSIZE]; + + debugX(2, "hpi_test: activating hpi..."); + hpi_activate(); + debugX(2, "OK.\n"); + +#if 0 + /* Dump the first 1024 bytes + * + */ + for(i=0; i<1024; i+=4) { + if(i%16==0) + printf("\n0x%08x: ", i); + printf("0x%08x ", hpi_read_noinc(i)); + } +#endif + + /* HPIA read-write test + * + */ + debugX(1, "hpi_test: starting HPIA read-write tests...\n"); + err |= hpi_write_addr_test(0xdeadc0de); + err |= hpi_write_addr_test(0xbeefd00d); + err |= hpi_write_addr_test(0xabcd1234); + err |= hpi_write_addr_test(0xaaaaaaaa); + if(err) { + debugX(1, "hpi_test: HPIA read-write tests: *** FAILED ***\n"); + return -1; + } + debugX(1, "hpi_test: HPIA read-write tests: OK\n"); + + + /* read write test using nonincremental data regs + * + */ + debugX(1, "hpi_test: starting nonincremental tests...\n"); + for(i=HPI_TEST_START; i<HPI_TEST_END; i+=4) { + err |= hpi_read_write_test(i, pattern); + + /* stolen from cmd_mem.c */ + if(pattern & 0x80000000) { + pattern = -pattern; /* complement & increment */ + } else { + pattern = ~pattern; + } + err |= hpi_read_write_test(i, pattern); + + if(err) { + debugX(1, "hpi_test: nonincremental tests *** FAILED ***\n"); + return -1; + } + } + debugX(1, "hpi_test: nonincremental test OK\n"); + + /* read write a chunk of data using nonincremental data regs + * + */ + debugX(1, "hpi_test: starting nonincremental chunk tests...\n"); + pattern = HPI_TEST_PATTERN; + for(i=HPI_TEST_START; i<HPI_TEST_END; i+=4) { + hpi_write_noinc(i, pattern); + + /* stolen from cmd_mem.c */ + if(pattern & 0x80000000) { + pattern = -pattern; /* complement & increment */ + } else { + pattern = ~pattern; + } + } + pattern = HPI_TEST_PATTERN; + for(i=HPI_TEST_START; i<HPI_TEST_END; i+=4) { + tmp = hpi_read_noinc(i); + + if(tmp != pattern) { + debugX(1, "hpi_test: noninc chunk test *** FAILED *** @ 0x%x, written=0x%x, read=0x%x\n", i, pattern, tmp); + err = -1; + } + /* stolen from cmd_mem.c */ + if(pattern & 0x80000000) { + pattern = -pattern; /* complement & increment */ + } else { + pattern = ~pattern; + } + } + if(err) + return -1; + debugX(1, "hpi_test: nonincremental chunk test OK\n"); + + +#ifdef DO_TINY_TEST + /* small verbose test using autoinc and nonautoinc to compare + * + */ + debugX(1, "hpi_test: tiny_autoinc_test...\n"); + hpi_tiny_autoinc_test(); + debugX(1, "hpi_test: tiny_autoinc_test done\n"); +#endif /* DO_TINY_TEST */ + + + /* $%& write a chunk of data using the autoincremental regs + * + */ + debugX(1, "hpi_test: starting autoinc test %d chunks with 0x%x bytes...\n", + ((HPI_TEST_END - HPI_TEST_START) / HPI_TEST_CHUNKSIZE), + HPI_TEST_CHUNKSIZE); + + for(i=HPI_TEST_START; + i < ((HPI_TEST_END - HPI_TEST_START) / HPI_TEST_CHUNKSIZE); + i++) { + /* generate the pattern data */ + debugX(3, "generating pattern data: "); + for(ii = 0; ii < HPI_TEST_CHUNKSIZE; ii++) { + debugX(3, "0x%x ", pattern); + + test_data[ii] = pattern; + read_data[ii] = 0x0; /* zero to be sure */ + + /* stolen from cmd_mem.c */ + if(pattern & 0x80000000) { + pattern = -pattern; /* complement & increment */ + } else { + pattern = ~pattern; + } + } + debugX(3, "done\n"); + + debugX(2, "Writing autoinc data @ 0x%x\n", i); + hpi_write_inc(i, test_data, HPI_TEST_CHUNKSIZE); + + debugX(2, "Reading autoinc data @ 0x%x\n", i); + hpi_read_inc(i, read_data, HPI_TEST_CHUNKSIZE); + + /* compare */ + for(ii = 0; ii < HPI_TEST_CHUNKSIZE; ii++) { + debugX(3, "hpi_test_autoinc: @ 0x%x, written=0x%x, read=0x%x", i+ii, test_data[ii], read_data[ii]); + if(read_data[ii] != test_data[ii]) { + debugX(0, "hpi_test: autoinc test @ 0x%x, written=0x%x, read=0x%x *** FAILED ***\n", i+ii, test_data[ii], read_data[ii]); + return -1; + } + } + } + debugX(1, "hpi_test: autoinc test OK\n"); + + return 0; +} +#else /* HPI_TEST_OSZI */ +int hpi_test(void) +{ + int i; + u32 read_data[TINY_AUTOINC_DATA_SIZE]; + + unsigned int dummy_data[TINY_AUTOINC_DATA_SIZE] = { + 0x11112222, 0x33334444, 0x55556666, 0x77778888, + 0x9999aaaa, 0xbbbbcccc, 0xddddeeee, 0xffff1111, + 0x00010002, 0x00030004, 0x00050006, 0x00070008, + 0x0009000a, 0x000b000c, 0x000d000e, 0x000f0001 + }; + + debugX(0, "hpi_test: activating hpi..."); + hpi_activate(); + debugX(0, "OK.\n"); + + while(1) { + led9(1); + debugX(0, " writing to autoinc...\n"); + hpi_write_inc(TINY_AUTOINC_BASE_ADDR, + dummy_data, TINY_AUTOINC_DATA_SIZE); + + debugX(0, " reading from autoinc...\n"); + hpi_read_inc(TINY_AUTOINC_BASE_ADDR, + read_data, TINY_AUTOINC_DATA_SIZE); + + for(i=0; i < (TINY_AUTOINC_DATA_SIZE); i++) { + debugX(0, " written=0x%x, read(inc)=0x%x\n", + dummy_data[i], read_data[i]); + } + led9(0); + udelay(2000000); + } + return 0; +} +#endif + +/* test if Host Port Address Register can be written correctly */ +static int hpi_write_addr_test(u32 addr) +{ + u32 read_back; + /* write address */ + HPI_HPIA_1 = ((u16) (addr >> 16)); /* First HW is most significant */ + HPI_HPIA_2 = ((u16) addr); + + read_back = (((u32) HPI_HPIA_1)<<16) | ((u32) HPI_HPIA_2); + + if(read_back == addr) { + debugX(2, " hpi_write_addr_test OK: written=0x%x, read=0x%x\n", + addr, read_back); + return 0; + } else { + debugX(0, " hpi_write_addr_test *** FAILED ***: written=0x%x, read=0x%x\n", + addr, read_back); + return -1; + } + + return 0; +} + +/* test if a simple read/write sequence succeeds */ +static int hpi_read_write_test(u32 addr, u32 data) +{ + u32 read_back; + + hpi_write_noinc(addr, data); + read_back = hpi_read_noinc(addr); + + if(read_back == data) { + debugX(2, " hpi_read_write_test: OK, addr=0x%x written=0x%x, read=0x%x\n", addr, data, read_back); + return 0; + } else { + debugX(0, " hpi_read_write_test: *** FAILED ***, addr=0x%x written=0x%x, read=0x%x\n", addr, data, read_back); + return -1; + } + + return 0; +} + +static int hpi_tiny_autoinc_test(void) +{ + int i; + u32 read_data[TINY_AUTOINC_DATA_SIZE]; + u32 read_data_noinc[TINY_AUTOINC_DATA_SIZE]; + + unsigned int dummy_data[TINY_AUTOINC_DATA_SIZE] = { + 0x11112222, 0x33334444, 0x55556666, 0x77778888, + 0x9999aaaa, 0xbbbbcccc, 0xddddeeee, 0xffff1111, + 0x00010002, 0x00030004, 0x00050006, 0x00070008, + 0x0009000a, 0x000b000c, 0x000d000e, 0x000f0001 + }; + + printf(" writing to autoinc...\n"); + hpi_write_inc(TINY_AUTOINC_BASE_ADDR, dummy_data, TINY_AUTOINC_DATA_SIZE); + + printf(" reading from autoinc...\n"); + hpi_read_inc(TINY_AUTOINC_BASE_ADDR, read_data, TINY_AUTOINC_DATA_SIZE); + + printf(" reading from noinc for comparison...\n"); + for(i=0; i < (TINY_AUTOINC_DATA_SIZE); i++) + read_data_noinc[i] = hpi_read_noinc(TINY_AUTOINC_BASE_ADDR+i*4); + + for(i=0; i < (TINY_AUTOINC_DATA_SIZE); i++) { + printf(" written=0x%x, read(inc)=0x%x, read(noinc)=0x%x\n", + dummy_data[i], read_data[i], read_data_noinc[i]); + } + return 0; +} + +#endif /* CONFIG_SPC1920_HPI_TEST */ diff --git a/board/spc1920/hpi.h b/board/spc1920/hpi.h new file mode 100644 index 000000000..450387308 --- /dev/null +++ b/board/spc1920/hpi.h @@ -0,0 +1,28 @@ +/* + * (C) Copyright 2006 + * Markus Klotzbuecher, DENX Software Engineering, mk@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +int hpi_init(void); + +#ifdef CONFIG_SPC1920_HPI_TEST +int hpi_test(void); +#endif diff --git a/board/spc1920/pld.h b/board/spc1920/pld.h index 3254f820c..5beb71b5c 100644 --- a/board/spc1920/pld.h +++ b/board/spc1920/pld.h @@ -5,8 +5,8 @@ typedef struct spc1920_pld { uchar com1_en; uchar dsp_reset; uchar dsp_hpi_on; + uchar superv_mode; uchar codec_dsp_power_en; - uchar clk2_en; uchar clk3_select; uchar clk4_select; } spc1920_pld_t; diff --git a/board/spc1920/spc1920.c b/board/spc1920/spc1920.c index 028f4c635..1f5dcb5d3 100644 --- a/board/spc1920/spc1920.c +++ b/board/spc1920/spc1920.c @@ -27,9 +27,9 @@ #include <common.h> #include <mpc8xx.h> #include "pld.h" +#include "hpi.h" #define _NOT_USED_ 0xFFFFFFFF -/* #define debug(fmt,args...) printf (fmt ,##args) */ static long int dram_size (long int, long int *, long int); @@ -172,10 +172,12 @@ long int initdram (int board_type) memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V; udelay (1000); + /* initalize the DSP Host Port Interface */ + hpi_init(); - /* PLD Setup */ - memctl->memc_or5 = CFG_OR5_PRELIM; - memctl->memc_br5 = CFG_BR5_PRELIM; + /* FRAM Setup */ + memctl->memc_or4 = CFG_OR4; + memctl->memc_br4 = CFG_BR4; udelay(1000); return (size_b0); @@ -207,13 +209,31 @@ int board_early_init_f(void) { volatile immap_t *immap = (immap_t *) CFG_IMMR; + /* Set Go/NoGo led (PA15) to color red */ + immap->im_ioport.iop_papar &= ~0x1; + immap->im_ioport.iop_paodr &= ~0x1; + immap->im_ioport.iop_padir |= 0x1; + immap->im_ioport.iop_padat |= 0x1; +#if 0 /* Turn on LED PD9 */ immap->im_ioport.iop_pdpar &= ~(0x0040); immap->im_ioport.iop_pddir |= 0x0040; immap->im_ioport.iop_pddat |= 0x0040; +#endif + + /* + * Enable console on SMC1. This requires turning on + * the com2_en signal and SMC1_DISABLE + */ + + /* SMC1_DISABLE: PB17 */ + immap->im_cpm.cp_pbodr &= ~0x4000; + immap->im_cpm.cp_pbpar &= ~0x4000; + immap->im_cpm.cp_pbdir |= 0x4000; + immap->im_cpm.cp_pbdat &= ~0x4000; - /* Enable PD10 (COM2_EN) */ + /* COM2_EN: PD10 */ immap->im_ioport.iop_pdpar &= ~0x0020; immap->im_ioport.iop_pddir &= ~0x4000; immap->im_ioport.iop_pddir |= 0x0020; @@ -228,6 +248,14 @@ int board_early_init_f(void) return 0; } +int last_stage_init(void) +{ +#ifdef CONFIG_SPC1920_HPI_TEST + printf("CMB1920 Host Port Interface Test: %s\n", + hpi_test() ? "Failed!" : "OK"); +#endif + return 0; +} int checkboard (void) { diff --git a/board/tqm5200/cam5200_flash.c b/board/tqm5200/cam5200_flash.c index 8c3f62e39..b3f095d80 100644 --- a/board/tqm5200/cam5200_flash.c +++ b/board/tqm5200/cam5200_flash.c @@ -25,7 +25,7 @@ #include <mpc5xxx.h> #include <asm/processor.h> -#ifdef CONFIG_CAM5200 +#if defined(CONFIG_CAM5200) && defined(CONFIG_CAM5200_NIOSFLASH) #if 0 #define DEBUGF(x...) printf(x) @@ -783,4 +783,4 @@ unsigned long flash_init(void) return total_b; } -#endif /* ifdef CONFIG_CAM5200 */ +#endif /* if defined(CONFIG_CAM5200) && defined(CONFIG_CAM5200_NIOSFLASH) */ diff --git a/board/uc101/Makefile b/board/uc101/Makefile new file mode 100644 index 000000000..ddfd2ef8a --- /dev/null +++ b/board/uc101/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2003-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/uc101/config.mk b/board/uc101/config.mk new file mode 100644 index 000000000..51e8e84c5 --- /dev/null +++ b/board/uc101/config.mk @@ -0,0 +1,41 @@ +# +# (C) Copyright 2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# INKA 4X0 board: +# +# Valid values for TEXT_BASE are: +# +# 0xFFE00000 boot high +# +# 0x00100000 boot from RAM (for testing only) +# + +ifndef TEXT_BASE +## Standard: boot high +TEXT_BASE = 0xFFF00000 +## For testing: boot from RAM +#TEXT_BASE = 0x00100000 +endif + +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board diff --git a/board/uc101/u-boot.lds b/board/uc101/u-boot.lds new file mode 100644 index 000000000..123a14c5a --- /dev/null +++ b/board/uc101/u-boot.lds @@ -0,0 +1,136 @@ +/* + * (C) Copyright 2003-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/mpc5xxx/start.o (.text) + cpu/mpc5xxx/traps.o (.text) + lib_generic/crc32.o (.text) + lib_ppc/cache.o (.text) + lib_ppc/time.o (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/environment.o (.ppcenv) + + *(.text) + *(.fixup) + *(.got1) + . = ALIGN(16); + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FFF) & 0xFFFFF000; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(4096); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/uc101/uc101.c b/board/uc101/uc101.c new file mode 100644 index 000000000..b80358584 --- /dev/null +++ b/board/uc101/uc101.c @@ -0,0 +1,371 @@ +/* + * (C) Copyright 2006 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * (C) Copyright 2003-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004 + * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. + * + * (C) Copyright 2004 + * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <mpc5xxx.h> +#include <pci.h> +#include <malloc.h> + +/* some SIMPLE GPIO Pins */ +#define GPIO_USB_8 (31-12) +#define GPIO_USB_7 (31-13) +#define GPIO_USB_6 (31-14) +#define GPIO_USB_0 (31-15) +#define GPIO_PSC3_7 (31-18) +#define GPIO_PSC3_6 (31-19) +#define GPIO_PSC3_1 (31-22) +#define GPIO_PSC3_0 (31-23) + +/* some simple Interrupt GPIO Pins */ +#define GPIO_PSC3_8 2 +#define GPIO_USB1_9 3 + +#define GPT_OUT_0 0x00000027 +#define GPT_OUT_1 0x00000037 +#define GPT_DISABLE 0x00000000 /* GPT pin disabled */ + +#define GP_SIMP_ENABLE_O(n, v) {pgpio->simple_dvo |= (v << n); \ + pgpio->simple_ddr |= (1 << n); \ + pgpio->simple_gpioe |= (1 << n); \ + } + +#define GP_SIMP_ENABLE_I(n) { pgpio->simple_ddr |= ~(1 << n); \ + pgpio->simple_gpioe |= (1 << n); \ + } + +#define GP_SIMP_SET_O(n, v) (pgpio->simple_dvo = v ? \ + (pgpio->simple_dvo | (1 << n)) : \ + (pgpio->simple_dvo & ~(1 << n)) ) + +#define GP_SIMP_GET_O(n) ((pgpio->simple_dvo >> n) & 1) +#define GP_SIMP_GET_I(n) ((pgpio->simple_ival >> n) & 1) + +#define GP_SINT_SET_O(n, v) (pgpio->sint_dvo = v ? \ + (pgpio->sint_dvo | (1 << n)) : \ + (pgpio->sint_dvo & ~(1 << n)) ) + +#define GP_SINT_ENABLE_O(n, v) {pgpio->sint_ode &= ~(1 << n); \ + pgpio->sint_ddr |= (1 << n); \ + GP_SINT_SET_O(n, v); \ + pgpio->sint_gpioe |= (1 << n); \ + } + +#define GP_SINT_ENABLE_I(n) { pgpio->sint_ddr |= ~(1 << n); \ + pgpio->sint_gpioe |= (1 << n); \ + } + +#define GP_SINT_GET_O(n) ((pgpio->sint_ival >> n) & 1) +#define GP_SINT_GET_I(n) ((pgpio-ntt_ival >> n) & 1) + +#define GP_TIMER_ENABLE_O(n, v) ( \ + ((volatile struct mpc5xxx_gpt *)(MPC5XXX_GPT + n))->emsr = v ? \ + GPT_OUT_1 : \ + GPT_OUT_0 ) + +#define GP_TIMER_SET_O(n, v) GP_TIMER_ENABLE_O(n, v) + +#define GP_TIMER_GET_O(n, v) ( \ + (((volatile struct mpc5xxx_gpt *)(MPC5XXX_GPT + n))->emsr & 0x10) >> 4) + +#define GP_TIMER_GET_I(n, v) ( \ + (((volatile struct mpc5xxx_gpt *)(MPC5XXX_GPT + n))->sr & 0x100) >> 8) + +#ifndef CFG_RAMBOOT +static void sdram_start (int hi_addr) +{ + long hi_addr_bit = hi_addr ? 0x01000000 : 0; + + /* unlock mode register */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit; + __asm__ volatile ("sync"); + + /* precharge all banks */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit; + __asm__ volatile ("sync"); + +#if SDRAM_DDR + /* set mode register: extended mode */ + *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE; + __asm__ volatile ("sync"); + + /* set mode register: reset DLL */ + *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000; + __asm__ volatile ("sync"); +#endif + + /* precharge all banks */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit; + __asm__ volatile ("sync"); + + /* auto refresh */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit; + __asm__ volatile ("sync"); + + /* set mode register */ + *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE; + __asm__ volatile ("sync"); + + /* normal operation */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit; + __asm__ volatile ("sync"); +} +#endif + +/* + * ATTENTION: Although partially referenced initdram does NOT make real use + * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE + * is something else than 0x00000000. + */ + +long int initdram (int board_type) +{ + ulong dramsize = 0; +#ifndef CFG_RAMBOOT + ulong test1, test2; + + /* setup SDRAM chip selects */ + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001c; /* 512MB at 0x0 */ + *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x40000000; /* disabled */ + __asm__ volatile ("sync"); + + /* setup config registers */ + *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; + *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; + __asm__ volatile ("sync"); + +#if SDRAM_DDR + /* set tap delay */ + *(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY; + __asm__ volatile ("sync"); +#endif + + /* find RAM size using SDRAM CS0 only */ + sdram_start(0); + test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x20000000); + sdram_start(1); + test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x20000000); + if (test1 > test2) { + sdram_start(0); + dramsize = test1; + } else { + dramsize = test2; + } + + /* memory smaller than 1MB is impossible */ + if (dramsize < (1 << 20)) { + dramsize = 0; + } + + /* set SDRAM CS0 size according to the amount of RAM found */ + if (dramsize > 0) { + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + + __builtin_ffs(dramsize >> 20) - 1; + } else { + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ + } + + *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */ +#else /* CFG_RAMBOOT */ + + /* retrieve size of memory connected to SDRAM CS0 */ + dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF; + if (dramsize >= 0x13) { + dramsize = (1 << (dramsize - 0x13)) << 20; + } else { + dramsize = 0; + } + + /* retrieve size of memory connected to SDRAM CS1 */ + dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF; + if (dramsize2 >= 0x13) { + dramsize2 = (1 << (dramsize2 - 0x13)) << 20; + } else { + dramsize2 = 0; + } + +#endif /* CFG_RAMBOOT */ + +/* return dramsize + dramsize2; */ + return dramsize; +} + +int checkboard (void) +{ + puts ("Board: MAN UC101\n"); + return 0; +} + +static void init_ports (void) +{ + volatile struct mpc5xxx_gpio *pgpio = + (struct mpc5xxx_gpio *)MPC5XXX_GPIO; + + GP_SIMP_ENABLE_I(GPIO_USB_8); /* HEX Bit 3 */ + GP_SIMP_ENABLE_I(GPIO_USB_7); /* HEX Bit 2 */ + GP_SIMP_ENABLE_I(GPIO_USB_6); /* HEX Bit 1 */ + GP_SIMP_ENABLE_I(GPIO_USB_0); /* HEX Bit 0 */ + GP_SIMP_ENABLE_I(GPIO_PSC3_0); /* Switch Menue A */ + GP_SIMP_ENABLE_I(GPIO_PSC3_1); /* Switch Menue B */ + GP_SIMP_ENABLE_I(GPIO_PSC3_6); /* Switch Cold_Warm */ + GP_SIMP_ENABLE_I(GPIO_PSC3_7); /* Switch Restart */ + GP_SINT_ENABLE_O(GPIO_PSC3_8, 0); /* LED H2 */ + GP_SINT_ENABLE_O(GPIO_USB1_9, 0); /* LED H3 */ + GP_TIMER_ENABLE_O(4, 0); /* LED H4 */ + GP_TIMER_ENABLE_O(5, 0); /* LED H5 */ + GP_TIMER_ENABLE_O(3, 0); /* LED HB */ + GP_TIMER_ENABLE_O(1, 0); /* RES_COLDSTART */ +} + +#ifdef CONFIG_PREBOOT + +static uchar kbd_magic_prefix[] = "key_magic"; +static uchar kbd_command_prefix[] = "key_cmd"; + +struct kbd_data_t { + char s1; +}; + +struct kbd_data_t* get_keys (struct kbd_data_t *kbd_data) +{ + volatile struct mpc5xxx_gpio *pgpio = + (struct mpc5xxx_gpio *)MPC5XXX_GPIO; + + kbd_data->s1 = GP_SIMP_GET_I(GPIO_USB_8) << 3 | \ + GP_SIMP_GET_I(GPIO_USB_7) << 2 | \ + GP_SIMP_GET_I(GPIO_USB_6) << 1 | \ + GP_SIMP_GET_I(GPIO_USB_0) << 0; + return kbd_data; +} + +static int compare_magic (const struct kbd_data_t *kbd_data, uchar *str) +{ + char s1 = str[0]; + + if (s1 >= '0' && s1 <= '9') + s1 -= '0'; + else if (s1 >= 'a' && s1 <= 'f') + s1 = s1 - 'a' + 10; + else if (s1 >= 'A' && s1 <= 'F') + s1 = s1 - 'A' + 10; + else + return -1; + + if (s1 != kbd_data->s1) return -1; + return 0; +} + +static uchar *key_match (const struct kbd_data_t *kbd_data) +{ + uchar magic[sizeof (kbd_magic_prefix) + 1]; + uchar *suffix; + uchar *kbd_magic_keys; + + /* + * The following string defines the characters that can be appended + * to "key_magic" to form the names of environment variables that + * hold "magic" key codes, i. e. such key codes that can cause + * pre-boot actions. If the string is empty (""), then only + * "key_magic" is checked (old behaviour); the string "125" causes + * checks for "key_magic1", "key_magic2" and "key_magic5", etc. + */ + if ((kbd_magic_keys = getenv ("magic_keys")) == NULL) + kbd_magic_keys = ""; + + /* loop over all magic keys; + * use '\0' suffix in case of empty string + */ + for (suffix = kbd_magic_keys; *suffix || + suffix == kbd_magic_keys; ++suffix) { + sprintf (magic, "%s%c", kbd_magic_prefix, *suffix); + + if (compare_magic(kbd_data, getenv(magic)) == 0) { + uchar cmd_name[sizeof (kbd_command_prefix) + 1]; + char *cmd; + + sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix); + cmd = getenv (cmd_name); + + return (cmd); + } + } + + return (NULL); +} + +#endif /* CONFIG_PREBOOT */ + +int misc_init_r (void) +{ + /* Init the I/O ports */ + init_ports (); + +#ifdef CONFIG_PREBOOT + struct kbd_data_t kbd_data; + /* Decode keys */ + uchar *str = strdup (key_match (get_keys (&kbd_data))); + /* Set or delete definition */ + setenv ("preboot", str); + free (str); +#endif /* CONFIG_PREBOOT */ + return 0; +} + +int board_early_init_r (void) +{ + *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ + *(vu_long *)MPC5XXX_BOOTCS_START = + *(vu_long *)MPC5XXX_CS0_START = START_REG(CFG_FLASH_BASE); + *(vu_long *)MPC5XXX_BOOTCS_STOP = + *(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(CFG_FLASH_BASE, CFG_FLASH_SIZE); + /* Interbus enable it here ?? */ + *(vu_long *)MPC5XXX_GPT6_ENABLE = GPT_OUT_1; + return 0; +} +#ifdef CONFIG_PCI +static struct pci_controller hose; + +extern void pci_mpc5xxx_init(struct pci_controller *); + +void pci_init_board(void) +{ + pci_mpc5xxx_init(&hose); +} +#endif + +#if defined(CONFIG_HW_WATCHDOG) +void hw_watchdog_reset(void) +{ + /* Trigger HW Watchdog with TIMER_0 */ + *(vu_long *)MPC5XXX_GPT0_ENABLE = GPT_OUT_1; + *(vu_long *)MPC5XXX_GPT0_ENABLE = GPT_OUT_0; +} +#endif diff --git a/board/v38b/v38b.c b/board/v38b/v38b.c index dede99688..ace4aa2ca 100644 --- a/board/v38b/v38b.c +++ b/board/v38b/v38b.c @@ -191,16 +191,8 @@ int checkboard (void) return 0; } - -int board_early_init_r(void) +int board_early_init_f(void) { - /* - * Now, when we are in RAM, enable flash write access for the - * detection process. Note that CS_BOOT cannot be cleared when - * executing in flash. - */ - *(vu_long *) MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ - #ifdef CONFIG_HW_WATCHDOG /* * Enable and configure the direction (output) of PSC3_9 - watchdog @@ -210,6 +202,17 @@ int board_early_init_r(void) *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC3_9; *(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC3_9; #endif /* CONFIG_HW_WATCHDOG */ + return 0; +} + +int board_early_init_r(void) +{ + /* + * Now, when we are in RAM, enable flash write access for the + * detection process. Note that CS_BOOT cannot be cleared when + * executing in flash. + */ + *(vu_long *) MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ /* * Enable GPIO_WKUP_7 to "read the status of the actual power diff --git a/common/cmd_boot.c b/common/cmd_boot.c index 182e2ab98..e68f16f9d 100644 --- a/common/cmd_boot.c +++ b/common/cmd_boot.c @@ -83,7 +83,7 @@ U_BOOT_CMD( extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); U_BOOT_CMD( - reset, CFG_MAXARGS, 1, do_reset, + reset, 1, 0, do_reset, "reset - Perform RESET of the CPU\n", NULL ); diff --git a/cpu/mpc5xxx/cpu_init.c b/cpu/mpc5xxx/cpu_init.c index b7e00b3e2..7e6582185 100644 --- a/cpu/mpc5xxx/cpu_init.c +++ b/cpu/mpc5xxx/cpu_init.c @@ -123,7 +123,7 @@ void cpu_init_f (void) #endif #if defined(CFG_CS7_START) && defined(CFG_CS7_SIZE) - *(vu_long *)MPC5XXX_CS7_START = START_REG(CFG_CS5_START); + *(vu_long *)MPC5XXX_CS7_START = START_REG(CFG_CS7_START); *(vu_long *)MPC5XXX_CS7_STOP = STOP_REG(CFG_CS7_START, CFG_CS7_SIZE); addecr |= (1 << 27); #endif diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c index 37fe3e715..71c1bfab1 100644 --- a/cpu/mpc5xxx/fec.c +++ b/cpu/mpc5xxx/fec.c @@ -376,7 +376,7 @@ static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis) #if (DEBUG & 0x2) if (fec->xcv_type != SEVENWIRE) - mpc5xxx_fec_phydump (); + mpc5xxx_fec_phydump (dev->name); #endif /* @@ -575,7 +575,7 @@ static void mpc5xxx_fec_halt(struct eth_device *dev) #if (DEBUG & 0x2) if (fec->xcv_type != SEVENWIRE) - mpc5xxx_fec_phydump (); + mpc5xxx_fec_phydump (dev->name); #endif /* @@ -882,7 +882,8 @@ int mpc5xxx_fec_initialize(bd_t * bis) defined(CONFIG_ICECUBE) || defined(CONFIG_INKA4X0) || \ defined(CONFIG_MCC200) || defined(CONFIG_O2DNT) || \ defined(CONFIG_PM520) || defined(CONFIG_TOP5200) || \ - defined(CONFIG_TQM5200) || defined(CONFIG_V38B) + defined(CONFIG_TQM5200) || defined(CONFIG_V38B) || \ + defined(CONFIG_UC101) # ifndef CONFIG_FEC_10MBIT fec->xcv_type = MII100; # else diff --git a/cpu/mpc8xx/serial.c b/cpu/mpc8xx/serial.c index 8ae584f2e..9d0fc6b4f 100644 --- a/cpu/mpc8xx/serial.c +++ b/cpu/mpc8xx/serial.c @@ -227,8 +227,17 @@ static int smc_init (void) sp->smc_smcm = 0; sp->smc_smce = 0xff; -#ifdef CFG_SPC1920_SMC1_CLK4 /* clock source is PLD */ - *((volatile uchar *) CFG_SPC1920_PLD_BASE+6) = 0xff; +#ifdef CFG_SPC1920_SMC1_CLK4 + /* clock source is PLD */ + + /* set freq to 19200 Baud */ + *((volatile uchar *) CFG_SPC1920_PLD_BASE+6) = 0x3; + /* configure clk4 as input */ + im->im_ioport.iop_pdpar |= 0x800; + im->im_ioport.iop_pddir &= ~0x800; + + cp->cp_simode = 0x0000; + cp->cp_simode |= 0x7000; #else /* Set up the baud rate generator */ smc_setbrg (); diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c index 9b711e2eb..713435563 100644 --- a/cpu/ppc4xx/405gp_pci.c +++ b/cpu/ppc4xx/405gp_pci.c @@ -380,7 +380,7 @@ void pci_405gp_setup_vga(struct pci_controller *hose, pci_dev_t dev, pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat); } -#if !(defined(CONFIG_PIP405) || defined (CONFIG_MIP405)) +#if !(defined(CONFIG_PIP405) || defined (CONFIG_MIP405)) && !(defined (CONFIG_SOLIDCARD3)) /* *As is these functs get called out of flash Not a horrible diff --git a/cpu/ppc4xx/440spe_pcie.c b/cpu/ppc4xx/440spe_pcie.c index 6130cd283..d6c4be5f1 100644 --- a/cpu/ppc4xx/440spe_pcie.c +++ b/cpu/ppc4xx/440spe_pcie.c @@ -26,10 +26,9 @@ #include <common.h> #include <pci.h> -#include "440spe_pcie.h" +#if defined(CONFIG_440SPE) && defined(CONFIG_PCI) -#if defined(CONFIG_440SPE) -#if defined(CONFIG_PCI) +#include "440spe_pcie.h" enum { PTYPE_ENDPOINT = 0x0, @@ -958,5 +957,4 @@ int ppc440spe_setup_pcie_endpoint(struct pci_controller *hose, int port) return 0; } -#endif /* CONFIG_PCI */ -#endif /* CONFIG_440SPE */ +#endif /* CONFIG_440SPE && CONFIG_PCI */ diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c index 427ea9462..4f5558328 100644 --- a/cpu/ppc4xx/4xx_enet.c +++ b/cpu/ppc4xx/4xx_enet.c @@ -166,6 +166,11 @@ struct eth_device *emac0_dev = NULL; #define LAST_EMAC_NUM 1 #endif +/* normal boards start with EMAC0 */ +#if !defined(CONFIG_EMAC_NR_START) +#define CONFIG_EMAC_NR_START 0 +#endif + /*-----------------------------------------------------------------------------+ * Prototypes and externals. *-----------------------------------------------------------------------------*/ @@ -601,6 +606,26 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) /* end Vitesse/Cicada errata */ } #endif + +#if defined(CONFIG_ET1011C_PHY) + /* + * Agere ET1011c PHY needs to have an extended register whacked + * for RGMII mode. + */ + if (((devnum == 2) || (devnum ==3)) && (4 == ethgroup)) { + miiphy_read (dev->name, reg, 0x16, ®_short); + reg_short &= ~(0x7); + reg_short |= 0x6; /* RGMII DLL Delay*/ + miiphy_write (dev->name, reg, 0x16, reg_short); + + miiphy_read (dev->name, reg, 0x17, ®_short); + reg_short &= ~(0x40); + miiphy_write (dev->name, reg, 0x17, reg_short); + + miiphy_write(dev->name, reg, 0x1c, 0x74f0); + } +#endif + #endif /* Start/Restart autonegotiation */ phy_setup_aneg (dev->name, reg); @@ -643,8 +668,9 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) if (hw_p->print_speed) { hw_p->print_speed = 0; - printf ("ENET Speed is %d Mbps - %s duplex connection\n", - (int) speed, (duplex == HALF) ? "HALF" : "FULL"); + printf ("ENET Speed is %d Mbps - %s duplex connection (EMAC%d)\n", + (int) speed, (duplex == HALF) ? "HALF" : "FULL", + hw_p->devnum); } #if defined(CONFIG_440) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \ @@ -1493,6 +1519,8 @@ int ppc_4xx_eth_initialize (bd_t * bis) struct eth_device *dev; int eth_num = 0; EMAC_4XX_HW_PST hw = NULL; + u8 ethaddr[4 + CONFIG_EMAC_NR_START][6]; + u32 hw_addr[4]; #if defined(CONFIG_440GX) unsigned long pfc1; @@ -1502,59 +1530,69 @@ int ppc_4xx_eth_initialize (bd_t * bis) pfc1 |= 0x01200000; mtsdr (sdr_pfc1, pfc1); #endif - /* set phy num and mode */ - bis->bi_phynum[0] = CONFIG_PHY_ADDR; - bis->bi_phymode[0] = 0; -#if defined(CONFIG_PHY1_ADDR) - bis->bi_phynum[1] = CONFIG_PHY1_ADDR; - bis->bi_phymode[1] = 0; -#endif -#if defined(CONFIG_440GX) - bis->bi_phynum[2] = CONFIG_PHY2_ADDR; - bis->bi_phynum[3] = CONFIG_PHY3_ADDR; - bis->bi_phymode[2] = 2; - bis->bi_phymode[3] = 2; - - ppc_4xx_eth_setup_bridge(0, bis); -#endif + /* first clear all mac-addresses */ + for (eth_num = 0; eth_num < LAST_EMAC_NUM; eth_num++) + memcpy(ethaddr[eth_num], "\0\0\0\0\0\0", 6); for (eth_num = 0; eth_num < LAST_EMAC_NUM; eth_num++) { - - /* See if we can actually bring up the interface, otherwise, skip it */ switch (eth_num) { default: /* fall through */ case 0: - if (memcmp (bis->bi_enetaddr, "\0\0\0\0\0\0", 6) == 0) { - bis->bi_phymode[eth_num] = BI_PHYMODE_NONE; - continue; - } + memcpy(ethaddr[eth_num + CONFIG_EMAC_NR_START], + bis->bi_enetaddr, 6); + hw_addr[eth_num] = 0x0; break; #ifdef CONFIG_HAS_ETH1 case 1: - if (memcmp (bis->bi_enet1addr, "\0\0\0\0\0\0", 6) == 0) { - bis->bi_phymode[eth_num] = BI_PHYMODE_NONE; - continue; - } + memcpy(ethaddr[eth_num + CONFIG_EMAC_NR_START], + bis->bi_enet1addr, 6); + hw_addr[eth_num] = 0x100; break; #endif #ifdef CONFIG_HAS_ETH2 case 2: - if (memcmp (bis->bi_enet2addr, "\0\0\0\0\0\0", 6) == 0) { - bis->bi_phymode[eth_num] = BI_PHYMODE_NONE; - continue; - } + memcpy(ethaddr[eth_num + CONFIG_EMAC_NR_START], + bis->bi_enet2addr, 6); + hw_addr[eth_num] = 0x400; break; #endif #ifdef CONFIG_HAS_ETH3 case 3: - if (memcmp (bis->bi_enet3addr, "\0\0\0\0\0\0", 6) == 0) { - bis->bi_phymode[eth_num] = BI_PHYMODE_NONE; - continue; - } + memcpy(ethaddr[eth_num + CONFIG_EMAC_NR_START], + bis->bi_enet3addr, 6); + hw_addr[eth_num] = 0x600; break; #endif } + } + + /* set phy num and mode */ + bis->bi_phynum[0] = CONFIG_PHY_ADDR; + bis->bi_phymode[0] = 0; + +#if defined(CONFIG_PHY1_ADDR) + bis->bi_phynum[1] = CONFIG_PHY1_ADDR; + bis->bi_phymode[1] = 0; +#endif +#if defined(CONFIG_440GX) + bis->bi_phynum[2] = CONFIG_PHY2_ADDR; + bis->bi_phynum[3] = CONFIG_PHY3_ADDR; + bis->bi_phymode[2] = 2; + bis->bi_phymode[3] = 2; + + ppc_4xx_eth_setup_bridge(0, bis); +#endif + + for (eth_num = 0; eth_num < LAST_EMAC_NUM; eth_num++) { + /* + * See if we can actually bring up the interface, + * otherwise, skip it + */ + if (memcmp (ethaddr[eth_num], "\0\0\0\0\0\0", 6) == 0) { + bis->bi_phymode[eth_num] = BI_PHYMODE_NONE; + continue; + } /* Allocate device structure */ dev = (struct eth_device *) malloc (sizeof (*dev)); @@ -1576,36 +1614,12 @@ int ppc_4xx_eth_initialize (bd_t * bis) } memset(hw, 0, sizeof(*hw)); - switch (eth_num) { - default: /* fall through */ - case 0: - hw->hw_addr = 0; - memcpy (dev->enetaddr, bis->bi_enetaddr, 6); - break; -#ifdef CONFIG_HAS_ETH1 - case 1: - hw->hw_addr = 0x100; - memcpy (dev->enetaddr, bis->bi_enet1addr, 6); - break; -#endif -#ifdef CONFIG_HAS_ETH2 - case 2: - hw->hw_addr = 0x400; - memcpy (dev->enetaddr, bis->bi_enet2addr, 6); - break; -#endif -#ifdef CONFIG_HAS_ETH3 - case 3: - hw->hw_addr = 0x600; - memcpy (dev->enetaddr, bis->bi_enet3addr, 6); - break; -#endif - } - + hw->hw_addr = hw_addr[eth_num]; + memcpy (dev->enetaddr, ethaddr[eth_num], 6); hw->devnum = eth_num; hw->print_speed = 1; - sprintf (dev->name, "ppc_4xx_eth%d", eth_num); + sprintf (dev->name, "ppc_4xx_eth%d", eth_num - CONFIG_EMAC_NR_START); dev->priv = (void *) hw; dev->init = ppc_4xx_eth_init; dev->halt = ppc_4xx_eth_halt; @@ -1663,7 +1677,6 @@ int ppc_4xx_eth_initialize (bd_t * bis) return (1); } - #if !defined(CONFIG_NET_MULTI) void eth_halt (void) { if (emac0_dev) { diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c index 9c5c9109b..57a7e8d6e 100644 --- a/cpu/ppc4xx/cpu.c +++ b/cpu/ppc4xx/cpu.c @@ -332,24 +332,44 @@ int checkcpu (void) strcpy(addstr, "No Security/Kasumi support"); break; - case PVR_440SP_RA: - puts("SP Rev. A"); + case PVR_440SP_6_RAB: + puts("SP Rev. A/B"); + strcpy(addstr, "RAID 6 support"); break; - case PVR_440SP_RB: - puts("SP Rev. B"); + case PVR_440SP_RAB: + puts("SP Rev. A/B"); + strcpy(addstr, "No RAID 6 support"); + break; + + case PVR_440SP_6_RC: + puts("SP Rev. C"); + strcpy(addstr, "RAID 6 support"); break; case PVR_440SP_RC: puts("SP Rev. C"); + strcpy(addstr, "No RAID 6 support"); + break; + + case PVR_440SPe_6_RA: + puts("SPe Rev. A"); + strcpy(addstr, "RAID 6 support"); break; case PVR_440SPe_RA: puts("SPe Rev. A"); + strcpy(addstr, "No RAID 6 support"); + break; + + case PVR_440SPe_6_RB: + puts("SPe Rev. B"); + strcpy(addstr, "RAID 6 support"); break; case PVR_440SPe_RB: puts("SPe Rev. B"); + strcpy(addstr, "No RAID 6 support"); break; default: @@ -419,7 +439,7 @@ int ppc440spe_revB() { unsigned int pvr; pvr = get_pvr(); - if (pvr == PVR_440SPe_RB) + if ((pvr == PVR_440SPe_6_RB) || (pvr == PVR_440SPe_RB)) return 1; else return 0; diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c index 4b746b072..ae2459108 100644 --- a/cpu/ppc4xx/cpu_init.c +++ b/cpu/ppc4xx/cpu_init.c @@ -31,9 +31,6 @@ DECLARE_GLOBAL_DATA_PTR; #endif - -#define mtebc(reg, data) mtdcr(ebccfga,reg);mtdcr(ebccfgd,data) - #ifdef CFG_INIT_DCACHE_CS # if (CFG_INIT_DCACHE_CS == 0) # define PBxAP pb0ap @@ -222,6 +219,10 @@ void set_chip_gpio_configuration(gpio_param_s (*gpio_tab)[GPIO_GROUP_MAX][GPIO_M void cpu_init_f (void) { +#if defined(CONFIG_WATCHDOG) + unsigned long val; +#endif + #if defined(CONFIG_405EP) /* * GPIO0 setup (select GPIO or alternate function) @@ -312,9 +313,11 @@ cpu_init_f (void) mtebc(pb7cr, CFG_EBC_PB7CR); #endif -#if defined(CONFIG_WATCHDOG) - unsigned long val; +#if defined (CFG_EBC_CFG) + mtebc(epcr, CFG_EBC_CFG); +#endif +#if defined(CONFIG_WATCHDOG) val = mfspr(tcr); #if defined(CONFIG_440EP) || defined(CONFIG_440GR) val |= 0xb8000000; /* generate system reset after 1.34 seconds */ diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c index f06038e99..d520cd3ff 100644 --- a/cpu/ppc4xx/sdram.c +++ b/cpu/ppc4xx/sdram.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2005-2006 + * (C) Copyright 2005-2007 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * (C) Copyright 2006 @@ -32,9 +32,9 @@ #include <asm/processor.h> #include "sdram.h" - #ifdef CONFIG_SDRAM_BANK0 +#ifndef CONFIG_440 #ifndef CFG_SDRAM_TABLE sdram_conf_t mb0cf[] = { @@ -50,9 +50,6 @@ sdram_conf_t mb0cf[] = CFG_SDRAM_TABLE; #define N_MB0CF (sizeof(mb0cf) / sizeof(mb0cf[0])) - -#ifndef CONFIG_440 - #ifdef CFG_SDRAM_CASL static ulong ns2clks(ulong ns) { @@ -221,6 +218,26 @@ void sdram_init(void) #else /* CONFIG_440 */ +/* + * Define some default values. Those can be overwritten in the + * board config file. + */ + +#ifndef CFG_SDRAM_TABLE +sdram_conf_t mb0cf[] = { + {(256 << 20), 13, 0x000C4001}, /* 256MB mode 3, 13x10(4) */ + {(64 << 20), 12, 0x00082001} /* 64MB mode 2, 12x9(4) */ +}; +#else +sdram_conf_t mb0cf[] = CFG_SDRAM_TABLE; +#endif + +#ifndef CFG_SDRAM0_TR0 +#define CFG_SDRAM0_TR0 0x41094012 +#endif + +#define N_MB0CF (sizeof(mb0cf) / sizeof(mb0cf[0])) + #define NUM_TRIES 64 #define NUM_READS 10 @@ -295,7 +312,6 @@ static void sdram_tr1_set(int ram_address, int* tr1_value) *tr1_value = (first_good + last_bad) / 2; } - #ifdef CONFIG_SDRAM_ECC static void ecc_init(ulong start, ulong size) { @@ -351,7 +367,8 @@ long int initdram(int board_type) int i; int tr1_bank1; -#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP) +#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \ + defined(CONFIG_440GR) || defined(CONFIG_440SP) /* * Soft-reset SDRAM controller. */ @@ -378,9 +395,9 @@ long int initdram(int board_type) * Following for CAS Latency = 2.5 @ 133 MHz PLB */ mtsdram(mem_b0cr, mb0cf[i].reg); - mtsdram(mem_tr0, 0x41094012); + mtsdram(mem_tr0, CFG_SDRAM0_TR0); mtsdram(mem_tr1, 0x80800800); /* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/ - mtsdram(mem_rtr, 0x7e000000); /* Interval 15.20µs @ 133MHz PLB*/ + mtsdram(mem_rtr, 0x04100000); /* Interval 7.8µs @ 133MHz PLB */ mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM*/ udelay(400); /* Delay 200 usecs (min) */ diff --git a/drivers/cfi_flash.c b/drivers/cfi_flash.c index a834cb4cf..696f9a47a 100644 --- a/drivers/cfi_flash.c +++ b/drivers/cfi_flash.c @@ -2,7 +2,7 @@ * (C) Copyright 2002-2004 * Brad Kemp, Seranoa Networks, Brad.Kemp@seranoa.com * - * Copyright (C) 2003, 2006 Arabella Software Ltd. + * Copyright (C) 2003 Arabella Software Ltd. * Yuli Barcohen <yuli@arabellasw.com> * * Copyright (C) 2004 @@ -35,13 +35,10 @@ /* #define DEBUG */ #include <common.h> - -#ifdef CFG_FLASH_CFI_DRIVER - -#include <watchdog.h> #include <asm/processor.h> #include <asm/byteorder.h> #include <environment.h> +#ifdef CFG_FLASH_CFI_DRIVER /* * This file implements a Common Flash Interface (CFI) driver for U-Boot. @@ -57,12 +54,10 @@ * AMD/Spansion Application Note: Migration from Single-byte to Three-byte * Device IDs, Publication Number 25538 Revision A, November 8, 2001 * + * define CFG_WRITE_SWAPPED_DATA, if you have to swap the Bytes between + * reading and writing ... (yes there is such a Hardware). */ -#if defined(__LITTLE_ENDIAN) && !defined(CFG_FLASH_CFI_SWAP) -#define CFG_FLASH_CFI_SWAP -#endif - #ifndef CFG_FLASH_BANKS_LIST #define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE } #endif @@ -263,7 +258,7 @@ inline uchar flash_read_uchar (flash_info_t * info, uint offset) uchar *cp; cp = flash_make_addr (info, 0, offset); -#if defined(CFG_FLASH_CFI_SWAP) +#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA) return (cp[0]); #else return (cp[info->portwidth - 1]); @@ -290,7 +285,7 @@ ushort flash_read_ushort (flash_info_t * info, flash_sect_t sect, uint offset) debug ("addr[%x] = 0x%x\n", x, addr[x]); } #endif -#if defined(CFG_FLASH_CFI_SWAP) +#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA) retval = ((addr[(info->portwidth)] << 8) | addr[0]); #else retval = ((addr[(2 * info->portwidth) - 1] << 8) | @@ -322,7 +317,7 @@ ulong flash_read_long (flash_info_t * info, flash_sect_t sect, uint offset) debug ("addr[%x] = 0x%x\n", x, addr[x]); } #endif -#if defined(CFG_FLASH_CFI_SWAP) +#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA) retval = (addr[0] << 16) | (addr[(info->portwidth)] << 24) | (addr[(2 * info->portwidth)]) | (addr[(3 * info->portwidth)] << 8); #else @@ -863,7 +858,7 @@ static int flash_full_status_check (flash_info_t * info, flash_sect_t sector, */ static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c) { -#if defined(__LITTLE_ENDIAN) +#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA) unsigned short w; unsigned int l; unsigned long long ll; @@ -874,7 +869,7 @@ static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c) cword->c = c; break; case FLASH_CFI_16BIT: -#if defined(__LITTLE_ENDIAN) +#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA) w = c; w <<= 8; cword->w = (cword->w >> 8) | w; @@ -883,7 +878,7 @@ static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c) #endif break; case FLASH_CFI_32BIT: -#if defined(__LITTLE_ENDIAN) +#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA) l = c; l <<= 24; cword->l = (cword->l >> 8) | l; @@ -892,7 +887,7 @@ static void flash_add_byte (flash_info_t * info, cfiword_t * cword, uchar c) #endif break; case FLASH_CFI_64BIT: -#if defined(__LITTLE_ENDIAN) +#if defined(__LITTLE_ENDIAN) && !defined(CFG_WRITE_SWAPPED_DATA) ll = c; ll <<= 56; cword->ll = (cword->ll >> 8) | ll; @@ -912,22 +907,12 @@ static void flash_make_cmd (flash_info_t * info, uchar cmd, void *cmdbuf) int i; uchar *cp = (uchar *) cmdbuf; -#if defined(CFG_FLASH_CFI_SWAP) +#if defined(__LITTLE_ENDIAN) || defined(CFG_WRITE_SWAPPED_DATA) for (i = info->portwidth; i > 0; i--) #else for (i = 1; i <= info->portwidth; i++) #endif *cp++ = (i & (info->chipwidth - 1)) ? '\0' : cmd; -#ifdef CFG_FLASH_CFI_2x16 - if ((info->portwidth == FLASH_CFI_32BIT) && (info->chipwidth == FLASH_CFI_BY16)) - { - uchar tmp; - cp = (uchar *) cmdbuf; - tmp = cp[1]; - cp[1] = cp[2]; - cp[2] = tmp; - } -#endif /* CFG_FLASH_CFI_2x16 */ } /* @@ -1376,7 +1361,6 @@ static int flash_write_cfiword (flash_info_t * info, ulong dest, ctladdr.cp = flash_make_addr (info, 0, 0); cptr.cp = (uchar *) dest; - /* Check if Flash is (sufficiently) erased */ switch (info->portwidth) { case FLASH_CFI_8BIT: @@ -1548,4 +1532,5 @@ static int flash_write_cfibuffer (flash_info_t * info, ulong dest, uchar * cp, } } #endif /* CFG_FLASH_USE_BUFFER_WRITE */ + #endif /* CFG_FLASH_CFI */ diff --git a/drivers/nand/nand_base.c b/drivers/nand/nand_base.c index 7fdf57b17..849582990 100644 --- a/drivers/nand/nand_base.c +++ b/drivers/nand/nand_base.c @@ -2338,7 +2338,7 @@ int nand_scan (struct mtd_info *mtd, int maxchips) mtd->oobblock = 1024 << (extid & 0x3); extid >>= 2; /* Calc oobsize */ - mtd->oobsize = (8 << (extid & 0x03)) * (mtd->oobblock / 512); + mtd->oobsize = (8 << (extid & 0x01)) * (mtd->oobblock / 512); extid >>= 2; /* Calc blocksize. Blocksize is multiples of 64KiB */ mtd->erasesize = (64 * 1024) << (extid & 0x03); diff --git a/dtt/Makefile b/dtt/Makefile index 79d4e9f96..e6cb128f3 100644 --- a/dtt/Makefile +++ b/dtt/Makefile @@ -30,7 +30,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)libdtt.a -COBJS = lm75.o ds1621.o adm1021.o +COBJS = lm75.o ds1621.o adm1021.o lm81.o SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/dtt/lm81.c b/dtt/lm81.c new file mode 100644 index 000000000..03bc53d58 --- /dev/null +++ b/dtt/lm81.c @@ -0,0 +1,148 @@ +/* + * (C) Copyright 2006 + * Heiko Schocher, DENX Software Enginnering <hs@denx.de> + * + * based on dtt/lm75.c which is ... + * + * (C) Copyright 2001 + * Bill Hunter, Wave 7 Optics, williamhunter@mediaone.net + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * On Semiconductor's LM81 Temperature Sensor + */ + +#include <common.h> + +#ifdef CONFIG_DTT_LM81 +#if !defined(CFG_EEPROM_PAGE_WRITE_ENABLE) || \ + (CFG_EEPROM_PAGE_WRITE_BITS < 1) +# error "CFG_EEPROM_PAGE_WRITE_ENABLE must be defined and CFG_EEPROM_PAGE_WRITE_BITS must be greater than 1 to use CONFIG_DTT_LM81" +#endif + +#include <i2c.h> +#include <dtt.h> + +/* + * Device code + */ +#define DTT_I2C_DEV_CODE 0x2c /* ON Semi's LM81 device */ + +int dtt_read(int sensor, int reg) +{ + int dlen = 1; + uchar data[2]; + + /* + * Calculate sensor address and register. + */ + sensor = DTT_I2C_DEV_CODE + (sensor & 0x03); /* calculate address of lm81 */ + + /* + * Now try to read the register. + */ + if (i2c_read(sensor, reg, 1, data, dlen) != 0) + return -1; + + return (int)data[0]; +} /* dtt_read() */ + + +int dtt_write(int sensor, int reg, int val) +{ + uchar data; + + /* + * Calculate sensor address and register. + */ + sensor = DTT_I2C_DEV_CODE + (sensor & 0x03); /* calculate address of lm81 */ + + data = (char)(val & 0xff); + + /* + * Write value to register. + */ + if (i2c_write(sensor, reg, 1, &data, 1) != 0) + return 1; + + return 0; +} /* dtt_write() */ + +#define DTT_MANU 0x3e +#define DTT_REV 0x3f +#define DTT_CONFIG 0x40 +#define DTT_ADR 0x48 + +static int _dtt_init(int sensor) +{ + int man; + int adr; + int rev; + + if (dtt_write (sensor, DTT_CONFIG, 0x01) < 0) + return 1; + /* The LM81 needs 400ms to get the correct values ... */ + udelay (400000); + man = dtt_read (sensor, DTT_MANU); + if (man != 0x01) + return 1; + adr = dtt_read (sensor, DTT_ADR); + if (adr < 0) + return 1; + rev = dtt_read (sensor, DTT_REV); + if (adr < 0) + return 1; + + printf ("DTT: Found LM81@%x Rev: %d\n", adr, rev); + return 0; +} /* _dtt_init() */ + + +int dtt_init (void) +{ + int i; + unsigned char sensors[] = CONFIG_DTT_SENSORS; + const char *const header = "DTT: "; + + for (i = 0; i < sizeof(sensors); i++) { + if (_dtt_init(sensors[i]) != 0) + printf("%s%d FAILED INIT\n", header, i+1); + else + printf("%s%d is %i C\n", header, i+1, + dtt_get_temp(sensors[i])); + } + + return (0); +} /* dtt_init() */ + +#define TEMP_FROM_REG(temp) \ + ((temp)<256?((((temp)&0x1fe) >> 1) * 10) + ((temp) & 1) * 5: \ + ((((temp)&0x1fe) >> 1) -255) * 10 - ((temp) & 1) * 5) \ + +int dtt_get_temp(int sensor) +{ + int val = dtt_read (sensor, DTT_READ_TEMP); + int tmpcnf = dtt_read (sensor, DTT_CONFIG_TEMP); + + return (TEMP_FROM_REG((val << 1) + ((tmpcnf & 0x80) >> 7))) / 10; +} /* dtt_get_temp() */ + +#endif /* CONFIG_DTT_LM81 */ diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h index 661968687..f10260003 100644 --- a/include/asm-ppc/processor.h +++ b/include/asm-ppc/processor.h @@ -747,11 +747,14 @@ #define PVR_440GX_RC 0x51B21892 #define PVR_440GX_RF 0x51B21894 #define PVR_405EP_RB 0x51210950 -#define PVR_440SP_RA 0x53221850 -#define PVR_440SP_RB 0x53221891 -#define PVR_440SP_RC 0x53221892 -#define PVR_440SPe_RA 0x53421890 -#define PVR_440SPe_RB 0x53421891 +#define PVR_440SP_6_RAB 0x53221850 /* 440SP rev A&B with RAID 6 support enabled */ +#define PVR_440SP_RAB 0x53321850 /* 440SP rev A&B without RAID 6 support */ +#define PVR_440SP_6_RC 0x53221891 /* 440SP rev C with RAID 6 support enabled */ +#define PVR_440SP_RC 0x53321891 /* 440SP rev C without RAID 6 support */ +#define PVR_440SPe_6_RA 0x53421890 /* 440SPe rev A with RAID 6 support enabled */ +#define PVR_440SPe_RA 0x53521890 /* 440SPe rev A without RAID 6 support */ +#define PVR_440SPe_6_RB 0x53421891 /* 440SPe rev B with RAID 6 support enabled */ +#define PVR_440SPe_RB 0x53521891 /* 440SPe rev B without RAID 6 support */ #define PVR_601 0x00010000 #define PVR_602 0x00050000 #define PVR_603 0x00030000 diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h index 08674ca49..7069b35ad 100644 --- a/include/configs/TQM5200.h +++ b/include/configs/TQM5200.h @@ -231,6 +231,17 @@ "protect on FC000000 +${filesize}\0" #endif +#ifndef CONFIG_CAM5200 +#define CUSTOM_ENV_SETTINGS \ + "bootfile=/tftpboot/tqm5200/uImage\0" \ + "u-boot=/tftpboot/tqm5200/u-boot.bin\0" +#else +#define CUSTOM_ENV_SETTINGS \ + "bootfile=cam5200/uImage\0" \ + "u-boot=cam5200/u-boot.bin\0" \ + "setup=tftp 200000 cam5200/setup.img; autoscr 200000\0" +#endif + #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "rootpath=/opt/eldk/ppc_6xx\0" \ @@ -248,8 +259,7 @@ "bootm ${kernel_addr}\0" \ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addcons;" \ "bootm\0" \ - "bootfile=/tftpboot/tqm5200/uImage\0" \ - "u-boot=/tftpboot/tqm5200/u-boot.bin\0" \ + CUSTOM_ENV_SETTINGS \ "load=tftp 200000 ${u-boot}\0" \ ENV_UPDT \ "" @@ -325,15 +335,7 @@ */ #define CFG_FLASH_BASE 0xFC000000 -#ifndef CONFIG_CAM5200 -/* use CFI flash driver */ -#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ -#define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START } -#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks - (= chip selects) */ -#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */ -#else /* CONFIG_CAM5200 */ +#if defined(CONFIG_CAM5200) && defined(CONFIG_CAM5200_NIOSFLASH) #define CFG_MAX_FLASH_BANKS 2 /* max num of flash banks (= chip selects) */ #define CFG_FLASH_WORD_SIZE unsigned int /* main flash device with */ @@ -344,7 +346,15 @@ #define CFG_FLASH_ADDR1 0x2AA #define CFG_FLASH_2ND_16BIT_DEV 1 /* NIOS flash is a 16bit device */ #define CFG_MAX_FLASH_SECT 128 -#endif /* ifndef CONFIG_CAM5200 */ +#else +/* use CFI flash driver */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START } +#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks + (= chip selects) */ +#define CFG_MAX_FLASH_SECT 512 /* max num of sects on one chip */ +#endif #define CFG_FLASH_EMPTY_INFO #define CFG_FLASH_SIZE 0x04000000 /* 64 MByte */ diff --git a/include/configs/alpr.h b/include/configs/alpr.h index bbe6b76bf..49027da5a 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -166,8 +166,23 @@ "cp.b 100000 fffc0000 40000;" \ "setenv filesize;saveenv\0" \ "upd=run load;run update\0" \ + "ethprime=ppc_4xx_eth3\0" \ + "ethact=ppc_4xx_eth3\0" \ + "autoload=no\0" \ + "ipconfig=dhcp;setenv serverip 11.0.0.152\0" \ + "actkernel=kernel2\0" \ + "load_fpga=fpga load 0 ffe00000 10dd9a\0" \ + "mtdargs=setenv bootargs root=/dev/mtdblock6 rw " \ + "rootfstype=jffs2 init=/sbin/init\0" \ + "kernel1_mtd=nand read 200000 0 200000;run mtdargs addip addtty"\ + ";bootm 200000\0" \ + "kernel2_mtd=nand read 200000 200000 200000;run mtdargs addip " \ + "addtty;bootm 200000\0" \ + "kernel1=run ipconfig load_fpga kernel1_mtd\0" \ + "kernel2=run ipconfig load_fpga kernel2_mtd\0" \ "" -#define CONFIG_BOOTCOMMAND "run flash_self" + +#define CONFIG_BOOTCOMMAND "run kernel2" #define CONFIG_BOOTDELAY 2 /* autoboot after 5 seconds */ @@ -291,6 +306,8 @@ /*----------------------------------------------------------------------- * Definitions for GPIO setup *-----------------------------------------------------------------------*/ +#define CFG_GPIO_SHUTDOWN (0x80000000 >> 6) +#define CFG_GPIO_SSD_EMPTY (0x80000000 >> 9) #define CFG_GPIO_EREADY (0x80000000 >> 26) #define CFG_GPIO_REV0 (0x80000000 >> 14) #define CFG_GPIO_REV1 (0x80000000 >> 15) diff --git a/include/configs/p3mx.h b/include/configs/p3mx.h index 262e9d6ac..54462f007 100644 --- a/include/configs/p3mx.h +++ b/include/configs/p3mx.h @@ -168,10 +168,12 @@ #define PCI_HOST_FORCE 1 /* configure as pci host */ #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ -#define CONFIG_PCI /* include pci support */ +#undef CONFIG_PCI /* include pci support */ +#ifdef CONFIG_PCI #define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ #define CONFIG_PCI_PNP /* do pci plug-and-play */ #define CONFIG_PCI_SCAN_SHOW /* show devices on bus */ +#endif /* CONFIG_PCI */ /* PCI MEMORY MAP section */ #define CFG_PCI0_MEM_BASE 0x80000000 @@ -194,7 +196,6 @@ #define CFG_PCI1_IO_SPACE_PCI 0x00000000 #define CFG_ISA_IO_BASE_ADDRESS (CFG_PCI0_IO_BASE) - #define CFG_PCI_IDSEL 0x30 #undef CONFIG_BOOTARGS diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h index ba6b113d8..2cc137ce6 100644 --- a/include/configs/pdnb3.h +++ b/include/configs/pdnb3.h @@ -71,12 +71,18 @@ #define CONFIG_BAUDRATE 115200 #define CFG_IXP425_CONSOLE IXP425_UART1 /* we use UART1 for console */ +#if defined(CONFIG_SCPU) +#define CMD_NAND_ADD 0 +#else +#define CMD_NAND_ADD CFG_CMD_NAND +#endif + #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ CFG_CMD_DHCP | \ CFG_CMD_DATE | \ CFG_CMD_NET | \ CFG_CMD_MII | \ - CFG_CMD_NAND | \ + CMD_NAND_ADD | \ CFG_CMD_I2C | \ CFG_CMD_ELF | \ CFG_CMD_PING) @@ -176,12 +182,20 @@ #define CFG_FLASH_BASE 0x50000000 #define CFG_MONITOR_BASE CFG_FLASH_BASE +#if defined(CONFIG_SCPU) +#define CFG_MONITOR_LEN (384 << 10) /* Reserve 512 kB for Monitor */ +#else #define CFG_MONITOR_LEN (504 << 10) /* Reserve 512 kB for Monitor */ +#endif /* * Expansion bus settings */ +#if defined(CONFIG_SCPU) +#define CFG_EXP_CS0 0x94d23C42 /* 8bit, max size */ +#else #define CFG_EXP_CS0 0x94913C43 /* 8bit, max size */ +#endif #define CFG_EXP_CS1 0x85000043 /* 8bit, 512bytes */ /* @@ -194,6 +208,12 @@ /* * FLASH and environment organization */ +#if defined(CONFIG_SCPU) +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT /* no byte writes on IXP4xx */ +#endif + #define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */ #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ @@ -217,20 +237,27 @@ #define CFG_ENV_IS_IN_FLASH 1 +#if defined(CONFIG_SCPU) +#define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ +#else #define CFG_ENV_SECT_SIZE 0x1000 /* size of one complete sector */ -#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) #define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ +#endif +#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) /* Address and size of Redundant Environment Sector */ #define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) +#if !defined(CONFIG_SCPU) /* * NAND-FLASH stuff */ #define CFG_MAX_NAND_DEVICE 1 #define NAND_MAX_CHIPS 1 #define CFG_NAND_BASE 0x51000000 /* NAND FLASH Base Address */ +#endif /* * GPIO settings @@ -284,9 +311,15 @@ /* * I2C RTC */ +#if 0 /* test-only */ +#define CONFIG_RTC_DS1340 1 +#define CFG_I2C_RTC_ADDR 0x68 +#else +/* M41T11 Serial Access Timekeeper(R) SRAM */ #define CONFIG_RTC_M41T11 1 #define CFG_I2C_RTC_ADDR 0x68 #define CFG_M41T11_BASE_YEAR 1900 /* play along with the linux driver */ +#endif /* * Spartan3 FPGA configuration support diff --git a/include/configs/sc3.h b/include/configs/sc3.h new file mode 100644 index 000000000..b76744975 --- /dev/null +++ b/include/configs/sc3.h @@ -0,0 +1,585 @@ +/* + * (C) Copyright 2007 + * Heiko Schocher, DENX Software Engineering, <hs@denx.de>. + * + * From: + * (C) Copyright 2003 + * Juergen Beisert, EuroDesign embedded technologies, jbeisert@eurodsn.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#undef USE_VGA_GRAPHICS + +/* Memory Map + * 0x00000000 .... 0x03FFFFFF -> RAM (up to 128MiB) + * 0x74000000 .... 0x740FFFFF -> CS#6 + * 0x74100000 .... 0x741FFFFF -> CS#7 + * 0x74200000 .... 0x742FFFFF -> CS4# if no internal USB + * 0x74300000 .... 0x743FFFFF -> CS5# if no boosted IDE + * 0x77C00000 .... 0x77CFFFFF -> CS4# USB HC (1 MiB) + * 0x77D00000 .... 0x77DFFFFF -> CS1# NAND-Flash (1 MiB) + * 0x78000000 .... 0x78FFFFFF -> CS2# ISA-Bus Speicherzugriff (16 MiB) + * 0x79000000 .... 0x7900FFFF -> CS2# ISA-Bus IO-Zugriff (16 MiB, mapped: 64kiB) + * 0x79010000 .... 0x79FFFFFF -> CS2# ISA-Bus IO-Zugriff (mirrored) + * 0x7A000000 .... 0x7A0FFFFF -> CS5# IDE emulation (1MiB) + * + * 0x80000000 .... 0x9FFFFFFF -> PCI-Bus Speicherzugriff (512MiB, mapped: 1:1) + * 0xA0000000 .... 0xBFFFFFFF -> PCI-Bus Speicherzugriff (512MiB, mapped: 0x00000000...0x1FFFFFFF) + * 0xE8000000 .... 0xE800FFFF -> PCI-Bus IO-Zugriff (64kiB, translated to PCI: 0x0000...0xFFFF) + * 0xE8800000 .... 0xEBFFFFFF -> PCI-Bus IO-Zugriff (56MiB, translated to PCI: 0x00800000...0x3FFFFFF) + * 0xEED00000 .... 0xEED00003 -> PCI-Bus + * 0xEF400000 .... 0xEF40003F -> PCI-Bus Local Configuration Registers + * 0xEF40003F .... 0xEF5FFFFF -> reserved + * 0xEF600000 .... 0xEFFFFFFF -> 405GP internal Devices (10 MiB) + * 0xF0000000 .... 0xF01FFFFF -> Flash-ROM (2 MiB) + * 0xF0200000 .... 0xF7FFFFFF -> free for flash devices + * 0xF8000000 .... 0xF8000FFF -> OnChipMemory (4kiB) + * 0xF8001000 .... 0xFFDFFFFF -> free for flash devices + * 0xFFE00000 .... 0xFFFFFFFF -> BOOT-ROM (2 MiB) + */ + +#define CONFIG_SOLIDCARD3 1 +#define CONFIG_4xx 1 +#define CONFIG_405GP 1 + +#define CONFIG_BOARD_EARLY_INIT_F 1 + +/* + * Define IDE_USES_ISA_EMULATION for slower IDE access in the ISA-IO address range + * If undefined, IDE access uses a seperat emulation with higher access speed. + * Consider to inform your Linux IDE driver about the different addresses! + * IDE_USES_ISA_EMULATION is only used if your CONFIG_COMMANDS macro includes + * the CFG_CMD_IDE macro! + */ +#define IDE_USES_ISA_EMULATION + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#define CONFIG_SERIAL_MULTI +#undef CONFIG_SERIAL_SOFTWARE_FIFO +/* + * define CONFIG_POWER_DOWN if your cpu should power down while waiting for your input + * Works only, if you have enabled the CONFIG_SERIAL_SOFTWARE_FIFO feature + */ +#if CONFIG_SERIAL_SOFTWARE_FIFO + #define CONFIG_POWER_DOWN +#endif + +/* + * define CONFIG_SYS_CLK_FREQ to your base crystal clock in Hz + */ +#define CONFIG_SYS_CLK_FREQ 33333333 + +/* + * define CONFIG_BAUDRATE to the baudrate value you want to use as default + */ +#define CONFIG_BAUDRATE 115200 +#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "nand_args=setenv bootargs root=/dev/mtdblock5 rw" \ + "rootfstype=jffs2\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm ${kernel_addr}\0" \ + "flash_nand=nand_args addip addcon;bootm ${kernel_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ + "rootpath=/opt/eldk/ppc_4xx\0" \ + "bootfile=/tftpboot/sc3/uImage\0" \ + "u-boot=/tftpboot/sc3/u-boot.bin\0" \ + "setup=tftp 200000 /tftpboot/sc3/setup.img;autoscr 200000\0" \ + "kernel_addr=FFE08000\0" \ + "" +#undef CONFIG_BOOTCOMMAND + +#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */ +#define CFG_DEVICE_NULLDEV 1 /* include nulldev device */ + +#if 1 /* feel free to disable for development */ +#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ +#define CONFIG_AUTOBOOT_PROMPT "\nSC3 - booting... stop with S\n" +#define CONFIG_AUTOBOOT_DELAY_STR "S" /* 1st "password" */ +#endif + +/* + * define CONFIG_BOOTCOMMAND to the autoboot commands. They will running after + * the CONFIG_BOOTDELAY delay to boot your machine + */ +#define CONFIG_BOOTCOMMAND "bootp;dcache on;bootm" + +/* + * define CONFIG_BOOTARGS to the default kernel parameters. They will used if you don't + * set different values at the u-boot prompt + */ +#ifdef USE_VGA_GRAPHICS + #define CONFIG_BOOTARGS "root=/dev/nfs rw ip=bootp nfsroot=/tftpboot/solidcard3re" +#else + #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/nfs rw ip=bootp" +#endif +/* + * Is the USB host controller assembled? If yes define CONFIG_ISP1161_PRESENT + * This reserves memory bank #4 for this purpose + */ +#undef CONFIG_ISP1161_PRESENT + +#undef CONFIG_LOADS_ECHO /* no echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_NET_MULTI +/* #define CONFIG_EEPRO100_SROM_WRITE */ +/* #define CONFIG_SHOW_MAC */ +#define CONFIG_EEPRO100 +#define CONFIG_MII 1 /* add 405GP MII PHY management */ +#define CONFIG_PHY_ADDR 1 /* the connected Phy defaults to address 1 */ + +#define CONFIG_COMMANDS \ + (CONFIG_CMD_DFL | \ + CFG_CMD_AUTOSCRIPT | \ + CFG_CMD_PCI | \ + CFG_CMD_IRQ | \ + CFG_CMD_NET | \ + CFG_CMD_MII | \ + CFG_CMD_PING | \ + CFG_CMD_NAND | \ + CFG_CMD_JFFS2 | \ + CFG_CMD_I2C | \ + CFG_CMD_IDE | \ + CFG_CMD_DATE | \ + CFG_CMD_DHCP | \ + CFG_CMD_CACHE | \ + CFG_CMD_ELF ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP 1 /* undef to save memory */ +#define CFG_PROMPT "SC3> " /* Monitor Command Prompt */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ + +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ + +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +/* + * If CFG_EXT_SERIAL_CLOCK, then the UART divisor is 1. + * If CFG_405_UART_ERRATA_59, then UART divisor is 31. + * Otherwise, UART divisor is determined by CPU Clock and CFG_BASE_BAUD value. + * The Linux BASE_BAUD define should match this configuration. + * baseBaud = cpuClock/(uartDivisor*16) + * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock, + * set Linux BASE_BAUD to 403200. + * + * Consider the OPB clock! If it get lower the BASE_BAUD must be lower to + * (see 405GP datasheet for descritpion) + */ +#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */ +#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */ +#define CFG_BASE_BAUD 921600 /* internal clock */ + +/* The following table includes the supported baudrates */ +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} + +#define CFG_LOAD_ADDR 0x1000000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/*----------------------------------------------------------------------- + * IIC stuff + *----------------------------------------------------------------------- + */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ + +#define I2C_INIT +#define I2C_ACTIVE 0 +#define I2C_TRISTATE 0 + +#define CFG_I2C_SPEED 100000 /* use the standard 100kHz speed */ +#define CFG_I2C_SLAVE 0x7F /* mask valid bits */ + +#define CONFIG_RTC_DS1337 +#define CFG_I2C_RTC_ADDR 0x68 + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------- + */ +#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ +#define PCI_HOST_FORCE 1 /* configure as pci host */ +#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ + +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + /* resource configuration */ + +/* If you want to see, whats connected to your PCI bus */ +/* #define CONFIG_PCI_SCAN_SHOW */ + +#define CFG_PCI_SUBSYS_VENDORID 0x0000 /* PCI Vendor ID: to-do!!! */ +#define CFG_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */ +#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ +#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */ +#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ +#define CFG_PCI_PTM2LA 0x00000000 /* disabled */ +#define CFG_PCI_PTM2MS 0x00000000 /* disabled */ +#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ + +/*----------------------------------------------------------------------- + * External peripheral base address + *----------------------------------------------------------------------- + */ +#if !(CONFIG_COMMANDS & CFG_CMD_IDE) + +#undef CONFIG_IDE_LED /* no led for ide supported */ +#undef CONFIG_IDE_RESET /* no reset for ide supported */ + +/*----------------------------------------------------------------------- + * IDE/ATA stuff + *----------------------------------------------------------------------- + */ +#else /* !(CONFIG_COMMANDS & CFG_CMD_IDE) */ +#define CONFIG_START_IDE 1 /* check, if use IDE */ + +#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ +#undef CONFIG_IDE_LED /* no led for ide supported */ +#undef CONFIG_IDE_RESET /* no reset for ide supported */ + +#define CONFIG_ATAPI +#define CONFIG_DOS_PARTITION +#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */ + +#ifndef IDE_USES_ISA_EMULATION + +/* New and faster access */ +#define CFG_ATA_BASE_ADDR 0x7A000000 /* start of ISA IO emulation */ + +/* How many IDE busses are available */ +#define CFG_IDE_MAXBUS 1 + +/* What IDE ports are available */ +#define CFG_ATA_IDE0_OFFSET 0x000 /* first is available */ +#undef CFG_ATA_IDE1_OFFSET /* second not available */ + +/* access to the data port is calculated: + CFG_ATA_BASE_ADDR + CFG_ATA_IDE0_OFFSET + CFG_ATA_DATA_OFFSET + 0 */ +#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */ + +/* access to the registers is calculated: + CFG_ATA_BASE_ADDR + CFG_ATA_IDE0_OFFSET + CFG_ATA_REG_OFFSET + [1..7] */ +#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */ + +/* access to the alternate register is calculated: + CFG_ATA_BASE_ADDR + CFG_ATA_IDE0_OFFSET + CFG_ATA_ALT_OFFSET + 6 */ +#define CFG_ATA_ALT_OFFSET 0x008 /* Offset for alternate registers */ + +#else /* IDE_USES_ISA_EMULATION */ + +#define CFG_ATA_BASE_ADDR 0x79000000 /* start of ISA IO emulation */ + +/* How many IDE busses are available */ +#define CFG_IDE_MAXBUS 1 + +/* What IDE ports are available */ +#define CFG_ATA_IDE0_OFFSET 0x01F0 /* first is available */ +#undef CFG_ATA_IDE1_OFFSET /* second not available */ + +/* access to the data port is calculated: + CFG_ATA_BASE_ADDR + CFG_ATA_IDE0_OFFSET + CFG_ATA_DATA_OFFSET + 0 */ +#define CFG_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */ + +/* access to the registers is calculated: + CFG_ATA_BASE_ADDR + CFG_ATA_IDE0_OFFSET + CFG_ATA_REG_OFFSET + [1..7] */ +#define CFG_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses */ + +/* access to the alternate register is calculated: + CFG_ATA_BASE_ADDR + CFG_ATA_IDE0_OFFSET + CFG_ATA_ALT_OFFSET + 6 */ +#define CFG_ATA_ALT_OFFSET 0x03F0 /* Offset for alternate registers */ + +#endif /* IDE_USES_ISA_EMULATION */ + +#endif /* !(CONFIG_COMMANDS & CFG_CMD_IDE) */ + +/* +#define CFG_KEY_REG_BASE_ADDR 0xF0100000 +#define CFG_IR_REG_BASE_ADDR 0xF0200000 +#define CFG_FPGA_REG_BASE_ADDR 0xF0300000 +*/ + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CFG_SDRAM_BASE _must_ start at 0 + * + * CFG_FLASH_BASE -> start address of internal flash + * CFG_MONITOR_BASE -> start of u-boot + */ +#ifndef __ASSEMBLER__ +extern unsigned long offsetOfBigFlash; +extern unsigned long offsetOfEnvironment; +#endif + +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_FLASH_BASE 0xFFE00000 +#define CFG_MONITOR_BASE 0xFFFC0000 /* placed last 256k */ +#define CFG_MONITOR_LEN (224 * 1024) /* Reserve 224 KiB for Monitor */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 KiB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MiB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +/*----------------------------------------------------------------------- + * FLASH organization ## FIXME: lookup in datasheet + */ +#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ + +#define CFG_FLASH_CFI /* flash is CFI compat. */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver*/ +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector */ +#define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash*/ +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CFG_WRITE_SWAPPED_DATA /* swap Databytes between reading/writing */ + +#define CFG_ENV_IS_IN_FLASH 1 +#if CFG_ENV_IS_IN_FLASH +#define CFG_ENV_OFFSET 0x00000000 /* Offset of Environment Sector in bottom type */ +#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ +#define CFG_ENV_SECT_SIZE 0x4000 /* see README - env sector total size */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +#endif +/* let us changing anything in our environment */ +#define CONFIG_ENV_OVERWRITE + +/* + * NAND-FLASH stuff + */ +#define CFG_MAX_NAND_DEVICE 1 +#define NAND_MAX_CHIPS 1 +#define CFG_NAND_BASE 0x77D00000 + + +#define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */ + +/* No command line, one static partition Partition 3 contains jffs2 rootfs */ +#undef CONFIG_JFFS2_CMDLINE +#define CONFIG_JFFS2_DEV "nand0" +#define CONFIG_JFFS2_PART_SIZE 0x00400000 +#define CONFIG_JFFS2_PART_OFFSET 0x00c00000 + +/*----------------------------------------------------------------------- + * Cache Configuration + * + * CFG_DCACHE_SIZE -> size of data cache: + * - 405GP 8k + * - 405GPr 16k + * How to handle the difference in chache size? + * CFG_CACHELINE_SIZE -> size of one cache line: 32 bytes + * (used in cpu/ppc4xx/start.S) +*/ +#define CFG_DCACHE_SIZE 16384 + +#define CFG_CACHELINE_SIZE 32 + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) + #define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Init Memory Controller: + * + */ + +#define FLASH_BASE0_PRELIM CFG_FLASH_BASE +#define FLASH_BASE1_PRELIM 0 + +/*----------------------------------------------------------------------- + * Some informations about the internal SRAM (OCM=On Chip Memory) + * + * CFG_OCM_DATA_ADDR -> location + * CFG_OCM_DATA_SIZE -> size +*/ + +#define CFG_TEMP_STACK_OCM 1 +#define CFG_OCM_DATA_ADDR 0xF8000000 +#define CFG_OCM_DATA_SIZE 0x1000 + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM): + * - we are using the internal 4k SRAM, so we don't need data cache mapping + * - internal SRAM (OCM=On Chip Memory) is placed to CFG_OCM_DATA_ADDR + * - Stackpointer will be located to + * (CFG_INIT_RAM_ADDR&0xFFFF0000) | (CFG_INIT_SP_OFFSET&0x0000FFFF) + * in cpu/ppc4xx/start.S + */ + +#undef CFG_INIT_DCACHE_CS +/* Where the internal SRAM starts */ +#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR +/* Where the internal SRAM ends (only offset) */ +#define CFG_INIT_RAM_END 0x0F00 + +/* + + CFG_INIT_RAM_ADDR ------> ------------ lower address + | | + | ^ | + | | | + | | Stack | + CFG_GBL_DATA_OFFSET ----> ------------ + | | + | 64 Bytes | + | | + CFG_INIT_RAM_END ------> ------------ higher address + (offset only) + +*/ +/* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_SIZE 64 +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +/* Initial value of the stack pointern in internal SRAM */ +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +/* ################################################################################### */ +/* These defines will be used in cpu/ppc4xx/cpu_init.c to setup external chip selects */ +/* They are currently undefined cause they are initiaized in board/solidcard3/init.S */ + +/* This chip select accesses the boot device */ +/* It depends on boot select switch if this device is 16 or 8 bit */ + +#undef CFG_EBC_PB0AP +#undef CFG_EBC_PB0CR + +#undef CFG_EBC_PB1AP +#undef CFG_EBC_PB1CR + +#undef CFG_EBC_PB2AP +#undef CFG_EBC_PB2CR + +#undef CFG_EBC_PB3AP +#undef CFG_EBC_PB3CR + +#undef CFG_EBC_PB4AP +#undef CFG_EBC_PB4CR + +#undef CFG_EBC_PB5AP +#undef CFG_EBC_PB5CR + +#undef CFG_EBC_PB6AP +#undef CFG_EBC_PB6CR + +#undef CFG_EBC_PB7AP +#undef CFG_EBC_PB7CR + +#define CFG_EBC_CFG 0xb84ef000 + +#define CONFIG_SDRAM_BANK0 /* use the standard SDRAM initialization */ +#undef CONFIG_SPD_EEPROM + +/* + * Define this to get more information about system configuration + */ +/* #define SC3_DEBUGOUT */ +#undef SC3_DEBUGOUT + +/*********************************************************************** + * External peripheral base address + ***********************************************************************/ + +#define CFG_ISA_MEM_BASE_ADDRESS 0x78000000 +/* + Die Grafik-Treiber greifen über die Adresse in diesem Macro auf den Chip zu. + Das funktioniert bei deren Karten, weil sie eine PCI-Bridge benutzen, die + das gleiche Mapping durchführen kann, wie der SC520 (also Aufteilen von IO-Zugriffen + auf ISA- und PCI-Zyklen) + */ +#define CFG_ISA_IO_BASE_ADDRESS 0xE8000000 +/*#define CFG_ISA_IO_BASE_ADDRESS 0x79000000 */ + +/************************************************************ + * Video support + ************************************************************/ + +#ifdef USE_VGA_GRAPHICS +#define CONFIG_VIDEO /* To enable video controller support */ +#define CONFIG_VIDEO_CT69000 +#define CONFIG_CFB_CONSOLE +/* #define CONFIG_VIDEO_LOGO */ +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_VIDEO_SW_CURSOR +/* #define CONFIG_VIDEO_HW_CURSOR */ +#define CONFIG_VIDEO_ONBOARD /* Video controller is on-board */ + +#define VIDEO_HW_RECTFILL +#define VIDEO_HW_BITBLT + +#endif + +/************************************************************ + * Ident + ************************************************************/ +#define CONFIG_SC3_VERSION "r1.4" + +#define POST_OUT(x) (*((volatile unsigned char*)(0x79000080))=x) + +#endif /* __CONFIG_H */ diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 00b92220c..e7f010889 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -188,7 +188,10 @@ /*----------------------------------------------------------------------- * DDR SDRAM *----------------------------------------------------------------------*/ -#define CFG_MBYTES_SDRAM (256) /* 256MB */ +#define CFG_MBYTES_SDRAM (256) /* 256MB */ +#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) +#define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */ +#endif /*----------------------------------------------------------------------- * I2C diff --git a/include/configs/spc1920.h b/include/configs/spc1920.h index 9d3609a67..09bbebdce 100644 --- a/include/configs/spc1920.h +++ b/include/configs/spc1920.h @@ -44,19 +44,19 @@ #define CONFIG_BAUDRATE 19200 /* use PLD CLK4 instead of brg */ -#undef CFG_SPC1920_SMC1_CLK4 +#define CFG_SPC1920_SMC1_CLK4 #define CONFIG_8xx_OSCLK 10000000 /* 10 MHz oscillator on EXTCLK */ #define CONFIG_8xx_CPUCLK_DEFAULT 50000000 #define CFG_8xx_CPUCLK_MIN 40000000 #define CFG_8xx_CPUCLK_MAX 133000000 -#define CFG_RESET_ADDRESS 0xf8000000 +#define CFG_RESET_ADDRESS 0xC0000000 #define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_LAST_STAGE_INIT - -#if 1 +#if 0 #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ #else #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ @@ -83,12 +83,13 @@ #ifndef CONFIG_COMMANDS #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ | CFG_CMD_ASKENV \ + | CFG_CMD_DATE \ | CFG_CMD_ECHO \ | CFG_CMD_IMMAP \ | CFG_CMD_JFFS2 \ | CFG_CMD_PING \ | CFG_CMD_DHCP \ - | CFG_CMD_IMMAP \ + | CFG_CMD_I2C \ | CFG_CMD_MII) /* & ~( CFG_CMD_NET)) */ @@ -193,13 +194,39 @@ #define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ #define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */ +#ifdef CFG_CMD_DATE +# define CONFIG_RTC_DS3231 +# define CFG_I2C_RTC_ADDR 0x68 +#endif + /*----------------------------------------------------------------------- * I2C configuration */ #if (CONFIG_COMMANDS & CFG_CMD_I2C) -#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CFG_I2C_SPEED 400000 /* I2C speed and slave address defaults */ -#define CFG_I2C_SLAVE 0x7F +/* enable I2C and select the hardware/software driver */ +#undef CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ + +#define CFG_I2C_SPEED 93000 /* 93 kHz is supposed to work */ +#define CFG_I2C_SLAVE 0xFE + +#ifdef CONFIG_SOFT_I2C +/* + * Software (bit-bang) I2C driver configuration + */ +#define PB_SCL 0x00000020 /* PB 26 */ +#define PB_SDA 0x00000010 /* PB 27 */ + +#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL) +#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA) +#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA) +#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0) +#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \ + else immr->im_cpm.cp_pbdat &= ~PB_SDA +#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \ + else immr->im_cpm.cp_pbdat &= ~PB_SCL +#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */ +#endif /* CONFIG_SOFT_I2C */ #endif /*----------------------------------------------------------------------- @@ -220,7 +247,7 @@ *----------------------------------------------------------------------- * PCMCIA config., multi-function pin tri-state */ -#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) +#define CFG_SIUMCR (SIUMCR_FRC) /*----------------------------------------------------------------------- * TBSCR - Time Base Status and Control 11-26 @@ -283,7 +310,7 @@ * FLASH timing: */ #define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \ - OR_SCY_3_CLK | OR_EHTR | OR_BI) + OR_SCY_6_CLK | OR_EHTR | OR_BI) #define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH) #define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) @@ -330,7 +357,56 @@ MBMR_TLFB_4X) /* 0x04804114 */ /* 0x10802114 */ -/* PLD CS5 */ +/* + * DSP Host Port Interface CS3 + */ +#define CFG_SPC1920_HPI_BASE 0x90000000 +#define CFG_PRELIM_OR3_AM 0xF8000000 + +#define CFG_OR3 (CFG_PRELIM_OR3_AM | \ + OR_G5LS | \ + OR_SCY_0_CLK | \ + OR_BI) + +#define CFG_BR3 ((CFG_SPC1920_HPI_BASE & BR_BA_MSK) | \ + BR_MS_UPMA | \ + BR_PS_16 | \ + BR_V); + +#define CFG_MAMR (MAMR_GPL_A4DIS | \ + MAMR_RLFA_5X | \ + MAMR_WLFA_5X) + +#define CONFIG_SPC1920_HPI_TEST + +#ifdef CONFIG_SPC1920_HPI_TEST +#define HPI_REG(x) (*((volatile u16 *) (CFG_SPC1920_HPI_BASE + x))) +#define HPI_HPIC_1 HPI_REG(0) +#define HPI_HPIC_2 HPI_REG(2) +#define HPI_HPIA_1 HPI_REG(0x2000008) +#define HPI_HPIA_2 HPI_REG(0x2000008 + 2) +#define HPI_HPID_INC_1 HPI_REG(0x1000004) +#define HPI_HPID_INC_2 HPI_REG(0x1000004 + 2) +#define HPI_HPID_NOINC_1 HPI_REG(0x300000c) +#define HPI_HPID_NOINC_2 HPI_REG(0x300000c + 2) +#endif /* CONFIG_SPC1920_HPI_TEST */ + +/* + * Ramtron FM18L08 FRAM 32KB on CS4 + */ +#define CFG_SPC1920_FRAM_BASE 0x80100000 +#define CFG_PRELIM_OR4_AM 0xffff8000 +#define CFG_OR4 (CFG_PRELIM_OR4_AM | \ + OR_ACS_DIV2 | \ + OR_BI | \ + OR_SCY_4_CLK | \ + OR_TRLX) + +#define CFG_BR4 ((CFG_SPC1920_FRAM_BASE & BR_BA_MSK) | BR_PS_8 | BR_V); + +/* + * PLD CS5 + */ #define CFG_SPC1920_PLD_BASE 0x80000000 #define CFG_PRELIM_OR5_AM 0xffff8000 @@ -343,10 +419,6 @@ #define CFG_BR5_PRELIM ((CFG_SPC1920_PLD_BASE & BR_BA_MSK) | BR_PS_8 | BR_V); -/* #define CFG_PLD_BASE 0x30000000 */ -/* #define CFG_OR5_PRELIM 0xffff1110 */ -/* #define CFG_BR5_PRELIM 0x30000401 */ - /* * Internal Definitions * diff --git a/include/configs/taishan.h b/include/configs/taishan.h new file mode 100644 index 000000000..7ace3971d --- /dev/null +++ b/include/configs/taishan.h @@ -0,0 +1,333 @@ +/* + * (C) Copyright 2007 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * TAISHAN.h - configuration for AMCC 440GX Ref + ***********************************************************************/ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_TAISHAN 1 /* Board is taishan */ +#define CONFIG_440GX 1 /* Specifc GX support */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#undef CFG_DRAM_TEST /* Disable-takes long time! */ +#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */ + +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ +#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ + +/*----------------------------------------------------------------------- + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + *----------------------------------------------------------------------*/ +#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ +#define CFG_FLASH_BASE 0xfc000000 /* start of FLASH */ +#define CFG_MONITOR_BASE 0xfffc0000 /* start of monitor */ +#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */ +#define CFG_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */ +#define CFG_ISRAM_BASE 0xc0000000 /* internal SRAM */ +#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */ + +#define CFG_EBC0_FLASH_BASE CFG_FLASH_BASE +#define CFG_EBC1_FPGA_BASE (CFG_PERIPHERAL_BASE + 0x01000000) +#define CFG_EBC2_LCM_BASE (CFG_PERIPHERAL_BASE + 0x02000000) +#define CFG_EBC3_CONN_BASE (CFG_PERIPHERAL_BASE + 0x08000000) + +#define CFG_GPIO_BASE (CFG_PERIPHERAL_BASE + 0x00000700) + +/*----------------------------------------------------------------------- + * Initial RAM & stack pointer (placed in internal SRAM) + *----------------------------------------------------------------------*/ +#define CFG_TEMP_STACK_OCM 1 +#define CFG_OCM_DATA_ADDR CFG_ISRAM_BASE +#define CFG_INIT_RAM_ADDR CFG_ISRAM_BASE /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM*/ +#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data*/ + +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4) +#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon*/ +#define CFG_MALLOC_LEN (1024 * 1024) /* Reserve 1024 kB for malloc*/ + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#define CONFIG_UART1_CONSOLE 1 /* use of UART1 as console */ +#define CONFIG_SERIAL_MULTI 1 /* enable serial multi support */ +#define CFG_EXT_SERIAL_CLOCK (1843200 * 6) /* Ext clk @ 11.059 MHz */ +#define CONFIG_BAUDRATE 115200 + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +/*----------------------------------------------------------------------- + * Environment + *----------------------------------------------------------------------*/ +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ + +/*----------------------------------------------------------------------- + * FLASH related + *----------------------------------------------------------------------*/ +#define CFG_FLASH_CFI +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ + +#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE} +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ +#define CFG_MAX_FLASH_SECT 1024 /* sectors per device */ + +#undef CFG_FLASH_CHECKSUM +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CFG_ENV_SECT_SIZE 0x40000 /* size of one complete sector */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +/*----------------------------------------------------------------------- + * E2PROM bootstrap configure value + *----------------------------------------------------------------------*/ + +/* + * 800/133/66 + * IIC 0~15: 86 78 11 6a 61 A7 04 62 00 00 00 00 00 00 00 00 + */ + +/* + * 800/160/80 + * IIC 0~15: 86 78 c1 a6 09 67 04 63 00 00 00 00 00 00 00 00 + */ + +/*----------------------------------------------------------------------- + * DDR SDRAM + *----------------------------------------------------------------------*/ +#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */ +#define CONFIG_SDRAM_BANK0 1 /* init onboard DDR SDRAM bank 0 */ +#define CFG_SDRAM0_TR0 0xC10A401A +#undef CONFIG_SDRAM_ECC /* enable ECC support */ + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F + +#undef CFG_I2C_MULTI_EEPROMS +#define CFG_I2C_EEPROM_ADDR 0x50 +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_ENABLE +#define CFG_EEPROM_PAGE_WRITE_BITS 3 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 + +#define CFG_BOOTSTRAP_IIC_ADDR 0x50 + +/* I2C SYSMON (LM75, AD7414 is almost compatible) */ +#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ +#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ +#define CFG_DTT_MAX_TEMP 70 +#define CFG_DTT_LOW_TEMP -30 +#define CFG_DTT_HYSTERESIS 3 + +/*----------------------------------------------------------------------- + * Environment + *----------------------------------------------------------------------*/ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "hostname=taishan\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "rootpath=/opt/eldk/ppc_4xx\0" \ + "bootfile=/tftpboot/taishan/uImage\0" \ + "kernel_addr=fc000000\0" \ + "ramdisk_addr=fc180000\0" \ + "load=tftp 100000 /tftpboot/taishan/u-boot.bin\0" \ + "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \ + "cp.b 100000 fffc0000 40000;" \ + "setenv filesize;saveenv\0" \ + "upd=run load;run update\0" \ + "fixedip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):" \ + "$(gatewayip):$(netmask):$(hostname):$(netdev):off panic=1\0" \ + "dhcp=setenv bootargs $(bootargs) ip=dhcp\0" \ + "kozio=bootm 0xffe00000\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" + +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#endif + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/*----------------------------------------------------------------------- + * Networking + *----------------------------------------------------------------------*/ +#define CONFIG_EMAC_NR_START 2 /* start with EMAC 2 (skip 0&1) */ +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_NET_MULTI 1 +#define CONFIG_PHY_ADDR 0xff /* no phy on EMAC0 */ +#define CONFIG_PHY1_ADDR 0xff /* no phy on EMAC1 */ +#define CONFIG_PHY2_ADDR 0x1 +#define CONFIG_PHY3_ADDR 0x3 +#define CONFIG_ET1011C_PHY 1 +#define CONFIG_HAS_ETH0 +#define CONFIG_HAS_ETH1 +#define CONFIG_HAS_ETH2 +#define CONFIG_HAS_ETH3 +#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ +#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ +#define CONFIG_PHY_RESET_DELAY 1000 +#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ + +#define CONFIG_NETCONSOLE /* include NetConsole support */ + +/*----------------------------------------------------------------------- + * Console/Commands/Parser + *----------------------------------------------------------------------*/ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DHCP | \ + CFG_CMD_DIAG | \ + CFG_CMD_DTT | \ + CFG_CMD_ELF | \ + CFG_CMD_EEPROM | \ + CFG_CMD_I2C | \ + CFG_CMD_IRQ | \ + CFG_CMD_MII | \ + CFG_CMD_NET | \ + CFG_CMD_NFS | \ + CFG_CMD_PCI | \ + CFG_CMD_PING | \ + CFG_CMD_REGINFO) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + *----------------------------------------------------------------------*/ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------- + */ +/* General PCI */ +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_EEPRO100 1 /* include PCI EEPRO100 */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */ + +/* Board-specific PCI */ +#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ +#define CFG_PCI_TARGET_INIT /* let board init pci target */ + +#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ +#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * Cache Configuration + *----------------------------------------------------------------------*/ +#define CFG_DCACHE_SIZE 32768 /* For AMCC 440 CPUs */ +#define CFG_CACHELINE_SIZE 32 /* ... */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif +#endif /* __CONFIG_H */ diff --git a/include/configs/uc101.h b/include/configs/uc101.h new file mode 100644 index 000000000..8cd8e9be7 --- /dev/null +++ b/include/configs/uc101.h @@ -0,0 +1,353 @@ +/* + * (C) Copyright 2003-2006 + * Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */ +#define CONFIG_UC101 1 /* UC101 board */ + +#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +#define CONFIG_BOARD_EARLY_INIT_R + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ +#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + +/* Partitions */ +#define CONFIG_DOS_PARTITION + +/* + * Supported commands + */ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_DATE | \ + CFG_CMD_DISPLAY | \ + CFG_CMD_DHCP | \ + CFG_CMD_PING | \ + CFG_CMD_EEPROM | \ + CFG_CMD_I2C | \ + CFG_CMD_DTT | \ + CFG_CMD_IDE | \ + CFG_CMD_FAT | \ + CFG_CMD_NFS | \ + CFG_CMD_MII | \ + CFG_CMD_SNTP ) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */ + +#if (TEXT_BASE == 0xFFF00000) /* Boot low */ +# define CFG_LOWBOOT 1 +#endif + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addwdt=setenv bootargs ${bootargs} wdt=off" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "flash_nfs=run nfsargs addip;" \ + "bootm ${kernel_addr}\0" \ + "net_nfs=tftp 300000 ${bootfile};run nfsargs addip addwdt;bootm\0" \ + "rootpath=/opt/eldk/ppc_82xx\0" \ + "" + +#define CONFIG_BOOTCOMMAND "run net_nfs" + +#define CONFIG_MISC_INIT_R 1 + +/* + * IPB Bus clocking configuration. + */ +#define CFG_IPBSPEED_133 /* define for 133MHz speed */ + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */ + +#define CFG_I2C_SPEED 100000 /* 100 kHz */ +#define CFG_I2C_SLAVE 0x7F + +/* + * EEPROM configuration + */ +#define CFG_I2C_EEPROM_ADDR 0x58 +#define CFG_I2C_EEPROM_ADDR_LEN 1 +#define CFG_EEPROM_PAGE_WRITE_BITS 4 +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 +/* for LM81 */ +#define CFG_EEPROM_PAGE_WRITE_ENABLE + +/* + * RTC configuration + */ +#define CONFIG_RTC_PCF8563 +#define CFG_I2C_RTC_ADDR 0x51 + +/* I2C SYSMON (LM75) */ +#define CONFIG_DTT_LM81 1 /* ON Semi's LM75 */ +#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ +#define CFG_DTT_MAX_TEMP 70 +#define CFG_DTT_LOW_TEMP -30 +#define CFG_DTT_HYSTERESIS 3 + +/* + * Flash configuration + */ +#define CFG_FLASH_BASE 0xFF800000 + +#define CFG_FLASH_SIZE 0x00800000 /* 8 MByte */ +#define CFG_MAX_FLASH_SECT 140 /* max num of sects on one chip */ + +#define CFG_ENV_ADDR (TEXT_BASE+0x40000) /* second sector */ +#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks + (= chip selects) */ +#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ +#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ + +#define CFG_FLASH_CFI_DRIVER +#define CFG_FLASH_CFI +#define CFG_FLASH_EMPTY_INFO +#define CFG_FLASH_CFI_AMD_RESET + +/* + * Environment settings + */ +#define CFG_ENV_IS_IN_FLASH 1 +#define CFG_ENV_SIZE 0x4000 +#define CFG_ENV_SECT_SIZE 0x10000 +#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +/* + * Memory map + */ +#define CFG_MBAR 0xF0000000 +#define CFG_DEFAULT_MBAR 0x80000000 + +#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SRAM_BASE 0x80100000 /* CS 1 */ +#define CFG_DISPLAY_BASE 0x80600000 /* CS 3 */ +#define CFG_IB_MASTER 0xc0510000 /* CS 6 */ +#define CFG_IB_EPLD 0xc0500000 /* CS 7 */ + +/* Settings for XLB = 132 MHz */ +#define SDRAM_DDR 1 +#define SDRAM_MODE 0x018D0000 +#define SDRAM_EMODE 0x40090000 +#define SDRAM_CONTROL 0x714f0f00 +#define SDRAM_CONFIG1 0x73722930 +#define SDRAM_CONFIG2 0x47770000 +#define SDRAM_TAPDELAY 0x10000000 + +/* SRAM */ +#define SRAM_BASE CFG_SRAM_BASE /* SRAM base address */ +#define SRAM_LEN 0x1fffff +#define SRAM_END (SRAM_BASE + SRAM_LEN) + +/* Use ON-Chip SRAM until RAM will be available */ +#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM +#ifdef CONFIG_POST +/* preserve space for the post_word at end of on-chip SRAM */ +#define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE +#else +#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE +#endif + + +#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET + +#define CFG_MONITOR_BASE TEXT_BASE +#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) +# define CFG_RAMBOOT 1 +#endif + +#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ +#define CFG_MALLOC_LEN (512 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Ethernet configuration + */ +#define CONFIG_MPC5xxx_FEC 1 +#define CONFIG_PHY_ADDR 0x00 +#define CONFIG_MII 1 + +/* + * GPIO configuration + */ +#define CFG_GPS_PORT_CONFIG 0x4d558044 + +/*use Hardware WDT */ +#define CONFIG_HW_WATCHDOG + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +/* Enable an alternate, more extensive memory test */ +#define CFG_ALT_MEMTEST + +#define CFG_MEMTEST_START 0x00300000 /* memtest works on */ +#define CFG_MEMTEST_END 0x00f00000 /* 3 ... 15 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x300000 /* default load address */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +/* + * Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined, + * which is normally part of the default commands (CFV_CMD_DFL) + */ +#define CONFIG_LOOPW + +/* + * Various low-level settings + */ +#if defined(CONFIG_MPC5200) +#define CFG_HID0_INIT HID0_ICE | HID0_ICFI +#define CFG_HID0_FINAL HID0_ICE +#else +#define CFG_HID0_INIT 0 +#define CFG_HID0_FINAL 0 +#endif + +#define CFG_BOOTCS_START CFG_FLASH_BASE +#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE +#define CFG_BOOTCS_CFG 0x00045D00 +#define CFG_CS0_START CFG_FLASH_BASE +#define CFG_CS0_SIZE CFG_FLASH_SIZE + +/* 8Mbit SRAM @0x80100000 */ +#define CFG_CS1_START CFG_SRAM_BASE +#define CFG_CS1_SIZE 0x00100000 +#define CFG_CS1_CFG 0x21D00 + +/* Display H1, Status Inputs, EPLD @0x80600000 8 Bit */ +#define CFG_CS3_START CFG_DISPLAY_BASE +#define CFG_CS3_SIZE 0x00000100 +#define CFG_CS3_CFG 0x00081802 + +/* Interbus Master 16 Bit */ +#define CFG_CS6_START CFG_IB_MASTER +#define CFG_CS6_SIZE 0x00010000 +#define CFG_CS6_CFG 0x00FF3500 + +/* Interbus EPLD 8 Bit */ +#define CFG_CS7_START CFG_IB_EPLD +#define CFG_CS7_SIZE 0x00010000 +#define CFG_CS7_CFG 0x00081800 + +#define CFG_CS_BURST 0x00000000 +#define CFG_CS_DEADCYCLE 0x33333333 + +/*----------------------------------------------------------------------- + * IDE/ATA stuff Supports IDE harddisk + *----------------------------------------------------------------------- + */ + +#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ + +#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CFG_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ + +#define CONFIG_IDE_PREINIT 1 +/* #define CONFIG_IDE_RESET 1 beispile siehe tqm5200.c */ + +#define CFG_ATA_IDE0_OFFSET 0x0000 + +#define CFG_ATA_BASE_ADDR MPC5XXX_ATA + +/* Offset for data I/O */ +#define CFG_ATA_DATA_OFFSET (0x0060) + +/* Offset for normal register accesses */ +#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) + +/* Offset for alternate registers */ +#define CFG_ATA_ALT_OFFSET (0x005C) + +/* Interval between registers */ +#define CFG_ATA_STRIDE 4 + +#define CONFIG_ATAPI 1 + +/*---------------------------------------------------------------------*/ +/* Display addresses */ +/*---------------------------------------------------------------------*/ +#define CFG_DISP_CHR_RAM (CFG_DISPLAY_BASE + 0x38) +#define CFG_DISP_CWORD (CFG_DISPLAY_BASE + 0x30) + +#endif /* __CONFIG_H */ diff --git a/include/configs/v38b.h b/include/configs/v38b.h index 554a7a41b..e19591d29 100644 --- a/include/configs/v38b.h +++ b/include/configs/v38b.h @@ -39,6 +39,7 @@ #define CONFIG_NETCONSOLE 1 #define CONFIG_BOARD_EARLY_INIT_R 1 /* do board-specific init */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* do board-specific init */ #define CFG_XLB_PIPELINING 1 /* gives better performance */ @@ -101,7 +102,7 @@ CFG_CMD_IRQ | \ CFG_CMD_JFFS2 | \ CFG_CMD_MII | \ - CFG_CMD_SDRAMi | \ + CFG_CMD_SDRAM | \ CFG_CMD_DATE | \ CFG_CMD_USB | \ CFG_CMD_FAT) @@ -135,7 +136,7 @@ "preboot=echo;echo Type \"run flash_nfs\" to mount root " \ "filesystem over NFS; echo\0" \ "netdev=eth0\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "ramargs=setenv bootargs root=/dev/ram rw wdt=off \0" \ "addip=setenv bootargs $(bootargs) " \ "ip=$(ipaddr):$(serverip):$(gatewayip):" \ "$(netmask):$(hostname):$(netdev):off panic=1\0" \ @@ -144,7 +145,7 @@ "$(ramdisk_addr)\0" \ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$(serverip):$(rootpath)\0" \ + "nfsroot=$(serverip):$(rootpath) wdt=off\0" \ "hostname=v38b\0" \ "ethact=FEC ETHERNET\0" \ "rootpath=/opt/eldk-3.1.1/ppc_6xx\0" \ diff --git a/include/configs/yellowstone.h b/include/configs/yellowstone.h index 58717f8a6..911a52dbc 100644 --- a/include/configs/yellowstone.h +++ b/include/configs/yellowstone.h @@ -302,6 +302,20 @@ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + *----------------------------------------------------------------------*/ +#define CFG_FLASH CFG_FLASH_BASE +#define CFG_CPLD 0x80000000 + +/* Memory Bank 0 (NOR-FLASH) initialization */ +#define CFG_EBC_PB0AP 0x03017300 +#define CFG_EBC_PB0CR (CFG_FLASH | 0xda000) + +/* Memory Bank 2 (CPLD) initialization */ +#define CFG_EBC_PB2AP 0x04814500 +#define CFG_EBC_PB2CR (CFG_CPLD | 0x18000) + +/*----------------------------------------------------------------------- * Cache Configuration */ #define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */ diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h index 6e942abca..2cc18db9a 100644 --- a/include/configs/yosemite.h +++ b/include/configs/yosemite.h @@ -307,6 +307,20 @@ #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + *----------------------------------------------------------------------*/ +#define CFG_FLASH CFG_FLASH_BASE +#define CFG_CPLD 0x80000000 + +/* Memory Bank 0 (NOR-FLASH) initialization */ +#define CFG_EBC_PB0AP 0x03017300 +#define CFG_EBC_PB0CR (CFG_FLASH | 0xda000) + +/* Memory Bank 2 (CPLD) initialization */ +#define CFG_EBC_PB2AP 0x04814500 +#define CFG_EBC_PB2CR (CFG_CPLD | 0x18000) + +/*----------------------------------------------------------------------- * Cache Configuration */ #define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */ diff --git a/include/dtt.h b/include/dtt.h index a17aa6770..842a761c9 100644 --- a/include/dtt.h +++ b/include/dtt.h @@ -29,6 +29,7 @@ #if defined(CONFIG_DTT_LM75) || \ defined(CONFIG_DTT_DS1621) || \ + defined(CONFIG_DTT_LM81) || \ defined(CONFIG_DTT_ADM1021) #define CONFIG_DTT /* We have a DTT */ @@ -58,6 +59,14 @@ extern int dtt_get_temp(int sensor); #define DTT_TEMP_SET 0x3 #endif +#if defined(CONFIG_DTT_LM81) +#define DTT_READ_TEMP 0x27 +#define DTT_CONFIG_TEMP 0x4b +#define DTT_TEMP_MAX 0x39 +#define DTT_TEMP_HYST 0x3a +#define DTT_CONFIG 0x40 +#endif + #if defined(CONFIG_DTT_DS1621) #define DTT_READ_TEMP 0xAA #define DTT_READ_COUNTER 0xA8 diff --git a/include/ppc405.h b/include/ppc405.h index 44702400e..e475fa54c 100644 --- a/include/ppc405.h +++ b/include/ppc405.h @@ -160,6 +160,7 @@ #define mem_bear 0x10 /* bus error address reg */ #endif #define mem_mcopt1 0x20 /* memory controller options 1 */ + #define mem_status 0x24 /* memory status */ #define mem_rtr 0x30 /* refresh timer reg */ #define mem_pmit 0x34 /* power management idle timer */ #define mem_mb0cf 0x40 /* memory bank 0 configuration */ diff --git a/include/ppc440.h b/include/ppc440.h index 50f4ec403..91cff414a 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -887,12 +887,14 @@ /* PLB4 Arbiter - PowerPC440EP Pass1 */ #define PLB4_DCR_BASE 0x080 +#define plb4_acr (PLB4_DCR_BASE+0x1) #define plb4_revid (PLB4_DCR_BASE+0x2) -#define plb4_acr (PLB4_DCR_BASE+0x3) #define plb4_besr (PLB4_DCR_BASE+0x4) #define plb4_bearl (PLB4_DCR_BASE+0x6) #define plb4_bearh (PLB4_DCR_BASE+0x7) +#define PLB4_ACR_WRP (0x80000000 >> 7) + /* Nebula PLB4 Arbiter - PowerPC440EP */ #define PLB_ARBITER_BASE 0x80 @@ -3284,26 +3286,26 @@ typedef struct { unsigned long add; /* gpio core base address */ /* * Macros for accessing the indirect EBC registers */ -#define mtebc(reg, data) mtdcr(ebccfga,reg);mtdcr(ebccfgd,data) -#define mfebc(reg, data) mtdcr(ebccfga,reg);data = mfdcr(ebccfgd) +#define mtebc(reg, data) { mtdcr(ebccfga,reg);mtdcr(ebccfgd,data); } +#define mfebc(reg, data) { mtdcr(ebccfga,reg);data = mfdcr(ebccfgd); } /* * Macros for accessing the indirect SDRAM controller registers */ -#define mtsdram(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data) -#define mfsdram(reg, data) mtdcr(memcfga,reg);data = mfdcr(memcfgd) +#define mtsdram(reg, data) { mtdcr(memcfga,reg);mtdcr(memcfgd,data); } +#define mfsdram(reg, data) { mtdcr(memcfga,reg);data = mfdcr(memcfgd); } /* * Macros for accessing the indirect clocking controller registers */ -#define mtclk(reg, data) mtdcr(clkcfga,reg);mtdcr(clkcfgd,data) -#define mfclk(reg, data) mtdcr(clkcfga,reg);data = mfdcr(clkcfgd) +#define mtclk(reg, data) { mtdcr(clkcfga,reg);mtdcr(clkcfgd,data); } +#define mfclk(reg, data) { mtdcr(clkcfga,reg);data = mfdcr(clkcfgd); } /* * Macros for accessing the sdr controller registers */ -#define mtsdr(reg, data) mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,data) -#define mfsdr(reg, data) mtdcr(sdrcfga,reg);data = mfdcr(sdrcfgd) +#define mtsdr(reg, data) { mtdcr(sdrcfga,reg);mtdcr(sdrcfgd,data); } +#define mfsdr(reg, data) { mtdcr(sdrcfga,reg);data = mfdcr(sdrcfgd); } #ifndef __ASSEMBLY__ diff --git a/lib_ppc/board.c b/lib_ppc/board.c index f42412196..24e8e970b 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -76,6 +76,10 @@ extern int update_flash_size (int flash_size); #endif +#if defined(CONFIG_SOLIDCARD3) +extern void sc3_read_eeprom(void); +#endif + #if (CONFIG_COMMANDS & CFG_CMD_DOC) void doc_init (void); #endif @@ -93,6 +97,9 @@ static char *failed = "*** failed ***\n"; extern flash_info_t flash_info[]; #endif +#if defined(CONFIG_START_IDE) +extern int board_start_ide(void); +#endif #include <environment.h> DECLARE_GLOBAL_DATA_PTR; @@ -815,6 +822,9 @@ void board_init_r (gd_t *id, ulong dest_addr) #endif /* CONFIG_405GP, CONFIG_405EP */ #endif /* CFG_EXTBDINFO */ +#if defined(CONFIG_SOLIDCARD3) + sc3_read_eeprom(); +#endif s = getenv ("ethaddr"); #if defined (CONFIG_MBX) || \ defined (CONFIG_RPXCLASSIC) || \ @@ -921,6 +931,7 @@ void board_init_r (gd_t *id, ulong dest_addr) defined(CONFIG_KUP4X) || \ defined(CONFIG_LWMON) || \ defined(CONFIG_PCU_E) || \ + defined(CONFIG_SOLIDCARD3) || \ defined(CONFIG_W7O) || \ defined(CONFIG_MISC_INIT_R) /* miscellaneous platform dependent initialisations */ @@ -1030,7 +1041,12 @@ void board_init_r (gd_t *id, ulong dest_addr) # else puts ("IDE: "); #endif +#if defined(CONFIG_START_IDE) + if (board_start_ide()) + ide_init (); +#else ide_init (); +#endif #endif /* CFG_CMD_IDE */ #ifdef CONFIG_LAST_STAGE_INIT diff --git a/nand_spl/board/amcc/sequoia/Makefile b/nand_spl/board/amcc/sequoia/Makefile index a71f583ed..b42da8cf6 100644 --- a/nand_spl/board/amcc/sequoia/Makefile +++ b/nand_spl/board/amcc/sequoia/Makefile @@ -76,7 +76,9 @@ $(obj)init.S: $(obj)sdram.c: @rm -f $(obj)sdram.c + @rm -f $(obj)sdram.h ln -s $(SRCTREE)/board/amcc/sequoia/sdram.c $(obj)sdram.c + ln -s $(SRCTREE)/board/amcc/sequoia/sdram.h $(obj)sdram.h # from nand_spl directory $(obj)nand_boot.c: diff --git a/rtc/Makefile b/rtc/Makefile index cf2b24ef0..cdc8ac934 100644 --- a/rtc/Makefile +++ b/rtc/Makefile @@ -29,7 +29,7 @@ LIB = $(obj)librtc.a COBJS = date.o \ bf533_rtc.o ds12887.o ds1302.o ds1306.o ds1307.o \ - ds1337.o ds1374.o ds1556.o ds164x.o ds174x.o \ + ds1337.o ds1374.o ds1556.o ds164x.o ds174x.o ds3231.o \ m41t11.o max6900.o m48t35ax.o mc146818.o mk48t59.o \ mpc5xxx.o mpc8xx.o pcf8563.o s3c24x0_rtc.o rs5c372.o diff --git a/rtc/ds3231.c b/rtc/ds3231.c new file mode 100644 index 000000000..50aeeb561 --- /dev/null +++ b/rtc/ds3231.c @@ -0,0 +1,193 @@ +/* + * (C) Copyright 2006 + * Markus Klotzbuecher, mk@denx.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Date & Time support (no alarms) for Dallas Semiconductor (now Maxim) + * Extremly Accurate DS3231 Real Time Clock (RTC). + * + * copied from ds1337.c + */ + +#include <common.h> +#include <command.h> +#include <rtc.h> +#include <i2c.h> + +#if defined(CONFIG_RTC_DS3231) && (CONFIG_COMMANDS & CFG_CMD_DATE) + +/*---------------------------------------------------------------------*/ +#undef DEBUG_RTC + +#ifdef DEBUG_RTC +#define DEBUGR(fmt,args...) printf(fmt ,##args) +#else +#define DEBUGR(fmt,args...) +#endif +/*---------------------------------------------------------------------*/ + +/* + * RTC register addresses + */ +#define RTC_SEC_REG_ADDR 0x0 +#define RTC_MIN_REG_ADDR 0x1 +#define RTC_HR_REG_ADDR 0x2 +#define RTC_DAY_REG_ADDR 0x3 +#define RTC_DATE_REG_ADDR 0x4 +#define RTC_MON_REG_ADDR 0x5 +#define RTC_YR_REG_ADDR 0x6 +#define RTC_CTL_REG_ADDR 0x0e +#define RTC_STAT_REG_ADDR 0x0f + + +/* + * RTC control register bits + */ +#define RTC_CTL_BIT_A1IE 0x1 /* Alarm 1 interrupt enable */ +#define RTC_CTL_BIT_A2IE 0x2 /* Alarm 2 interrupt enable */ +#define RTC_CTL_BIT_INTCN 0x4 /* Interrupt control */ +#define RTC_CTL_BIT_RS1 0x8 /* Rate select 1 */ +#define RTC_CTL_BIT_RS2 0x10 /* Rate select 2 */ +#define RTC_CTL_BIT_DOSC 0x80 /* Disable Oscillator */ + +/* + * RTC status register bits + */ +#define RTC_STAT_BIT_A1F 0x1 /* Alarm 1 flag */ +#define RTC_STAT_BIT_A2F 0x2 /* Alarm 2 flag */ +#define RTC_STAT_BIT_OSF 0x80 /* Oscillator stop flag */ + + +static uchar rtc_read (uchar reg); +static void rtc_write (uchar reg, uchar val); +static uchar bin2bcd (unsigned int n); +static unsigned bcd2bin (uchar c); + + +/* + * Get the current time from the RTC + */ +void rtc_get (struct rtc_time *tmp) +{ + uchar sec, min, hour, mday, wday, mon_cent, year, control, status; + + control = rtc_read (RTC_CTL_REG_ADDR); + status = rtc_read (RTC_STAT_REG_ADDR); + sec = rtc_read (RTC_SEC_REG_ADDR); + min = rtc_read (RTC_MIN_REG_ADDR); + hour = rtc_read (RTC_HR_REG_ADDR); + wday = rtc_read (RTC_DAY_REG_ADDR); + mday = rtc_read (RTC_DATE_REG_ADDR); + mon_cent = rtc_read (RTC_MON_REG_ADDR); + year = rtc_read (RTC_YR_REG_ADDR); + + DEBUGR ("Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x " + "hr: %02x min: %02x sec: %02x control: %02x status: %02x\n", + year, mon_cent, mday, wday, hour, min, sec, control, status); + + if (status & RTC_STAT_BIT_OSF) { + printf ("### Warning: RTC oscillator has stopped\n"); + /* clear the OSF flag */ + rtc_write (RTC_STAT_REG_ADDR, + rtc_read (RTC_STAT_REG_ADDR) & ~RTC_STAT_BIT_OSF); + } + + tmp->tm_sec = bcd2bin (sec & 0x7F); + tmp->tm_min = bcd2bin (min & 0x7F); + tmp->tm_hour = bcd2bin (hour & 0x3F); + tmp->tm_mday = bcd2bin (mday & 0x3F); + tmp->tm_mon = bcd2bin (mon_cent & 0x1F); + tmp->tm_year = bcd2bin (year) + ((mon_cent & 0x80) ? 2000 : 1900); + tmp->tm_wday = bcd2bin ((wday - 1) & 0x07); + tmp->tm_yday = 0; + tmp->tm_isdst= 0; + + DEBUGR ("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", + tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, + tmp->tm_hour, tmp->tm_min, tmp->tm_sec); +} + + +/* + * Set the RTC + */ +void rtc_set (struct rtc_time *tmp) +{ + uchar century; + + DEBUGR ("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", + tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, + tmp->tm_hour, tmp->tm_min, tmp->tm_sec); + + rtc_write (RTC_YR_REG_ADDR, bin2bcd (tmp->tm_year % 100)); + + century = (tmp->tm_year >= 2000) ? 0x80 : 0; + rtc_write (RTC_MON_REG_ADDR, bin2bcd (tmp->tm_mon) | century); + + rtc_write (RTC_DAY_REG_ADDR, bin2bcd (tmp->tm_wday + 1)); + rtc_write (RTC_DATE_REG_ADDR, bin2bcd (tmp->tm_mday)); + rtc_write (RTC_HR_REG_ADDR, bin2bcd (tmp->tm_hour)); + rtc_write (RTC_MIN_REG_ADDR, bin2bcd (tmp->tm_min)); + rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec)); +} + + +/* + * Reset the RTC. We also enable the oscillator output on the + * SQW/INTB* pin and program it for 32,768 Hz output. Note that + * according to the datasheet, turning on the square wave output + * increases the current drain on the backup battery from about + * 600 nA to 2uA. + */ +void rtc_reset (void) +{ + rtc_write (RTC_CTL_REG_ADDR, RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS2); +} + + +/* + * Helper functions + */ + +static +uchar rtc_read (uchar reg) +{ + return (i2c_reg_read (CFG_I2C_RTC_ADDR, reg)); +} + + +static void rtc_write (uchar reg, uchar val) +{ + i2c_reg_write (CFG_I2C_RTC_ADDR, reg, val); +} + +static unsigned bcd2bin (uchar n) +{ + return ((((n >> 4) & 0x0F) * 10) + (n & 0x0F)); +} + +static unsigned char bin2bcd (unsigned int n) +{ + return (((n / 10) << 4) | (n % 10)); +} + +#endif /* (CONFIG_RTC_DS3231) && (CONFIG_COMMANDS & CFG_CMD_DATE) */ |