diff options
| -rw-r--r-- | board/sbc8548/sbc8548.c | 38 |
1 files changed, 35 insertions, 3 deletions
diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c index d1ef3bee5..371d07695 100644 --- a/board/sbc8548/sbc8548.c +++ b/board/sbc8548/sbc8548.c @@ -76,11 +76,15 @@ local_bus_init(void) volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; - uint clkdiv; + uint clkdiv, lbc_mhz, lcrr = CONFIG_SYS_LBC_LCRR; sys_info_t sysinfo; get_sys_info(&sysinfo); - clkdiv = (in_be32(&lbc->lcrr) & LCRR_CLKDIV) * 2; + + lbc_mhz = sysinfo.freqLocalBus / 1000000; + clkdiv = sysinfo.freqSystemBus / sysinfo.freqLocalBus; + + debug("LCRR=0x%x, CD=%d, MHz=%d\n", lcrr, clkdiv, lbc_mhz); out_be32(&gur->lbiuiplldcr1, 0x00078080); if (clkdiv == 16) { @@ -91,10 +95,38 @@ local_bus_init(void) out_be32(&gur->lbiuiplldcr0, 0x5c0f1bf0); } - setbits_be32(&lbc->lcrr, 0x00030000); + /* + * Local Bus Clock > 83.3 MHz. According to timing + * specifications set LCRR[EADC] to 2 delay cycles. + */ + if (lbc_mhz > 83) { + lcrr &= ~LCRR_EADC; + lcrr |= LCRR_EADC_2; + } + + /* + * According to MPC8548ERMAD Rev. 1.3, 13.3.1.16, 13-30 + * disable PLL bypass for Local Bus Clock > 83 MHz. + */ + if (lbc_mhz >= 66) + lcrr &= (~LCRR_DBYP); /* DLL Enabled */ + + else + lcrr |= LCRR_DBYP; /* DLL Bypass */ + out_be32(&lbc->lcrr, lcrr); asm("sync;isync;msync"); + /* + * According to MPC8548ERMAD Rev.1.3 read back LCRR + * and terminate with isync + */ + lcrr = in_be32(&lbc->lcrr); + asm ("isync;"); + + /* let DLL stabilize */ + udelay(500); + out_be32(&lbc->ltesr, 0xffffffff); /* Clear LBC error IRQs */ out_be32(&lbc->lteir, 0xffffffff); /* Enable LBC error IRQs */ } |