diff options
| -rwxr-xr-x | MAKEALL | 2 | ||||
| -rw-r--r-- | Makefile | 8 | ||||
| -rw-r--r-- | board/eukrea/cpu9260/cpu9260.c | 33 | ||||
| -rw-r--r-- | board/eukrea/cpu9260/led.c | 6 | ||||
| -rw-r--r-- | include/configs/cpu9260.h | 11 |
5 files changed, 24 insertions, 36 deletions
@@ -455,8 +455,6 @@ LIST_at91="$(boards_by_soc at91)\ at91sam9m10g45ek \ at91sam9rlek \ CPUAT91 \ - CPU9260 \ - CPU9G20 \ pm9g45 \ SBC35_A9G20 \ TNY_A9260 \ @@ -820,14 +820,6 @@ at91sam9rlek_config : unconfig fi; @$(MKCONFIG) -n $@ -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91 -CPU9G20_128M_config \ -CPU9G20_config \ -CPU9260_128M_config \ -CPU9260_config : unconfig - @mkdir -p $(obj)include - @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h - @$(MKCONFIG) -n $@ -a cpu9260 arm arm926ejs cpu9260 eukrea at91 - at91sam9m10g45ek_nandflash_config \ at91sam9m10g45ek_dataflash_config \ at91sam9m10g45ek_dataflash_cs0_config \ diff --git a/board/eukrea/cpu9260/cpu9260.c b/board/eukrea/cpu9260/cpu9260.c index 9ec48a0d2..0959c5cdb 100644 --- a/board/eukrea/cpu9260/cpu9260.c +++ b/board/eukrea/cpu9260/cpu9260.c @@ -4,7 +4,7 @@ * Lead Tech Design <www.leadtechdesign.com> * Ilko Iliev <www.ronetix.at> * - * (C) Copyright 2009 + * (C) Copyright 2009-2011 * Eric Benard <eric@eukrea.com> * * See file CREDITS for list of people who contributed to this @@ -27,16 +27,15 @@ */ #include <common.h> -#include <asm/sizes.h> +#include <asm/io.h> #include <asm/arch/at91sam9260.h> #include <asm/arch/at91sam9_smc.h> #include <asm/arch/at91_common.h> +#include <asm/arch/at91_matrix.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/at91_rstc.h> -#include <asm/arch/at91_matrix.h> #include <asm/arch/at91_pio.h> #include <asm/arch/clk.h> -#include <asm/arch/io.h> #include <asm/arch/hardware.h> #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) #include <net.h> @@ -54,9 +53,9 @@ DECLARE_GLOBAL_DATA_PTR; static void cpu9260_nand_hw_init(void) { unsigned long csa; - at91_smc_t *smc = (at91_smc_t *) AT91_SMC_BASE; - at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE; - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_smc_t *smc = (at91_smc_t *) ATMEL_BASE_SMC; + at91_matrix_t *matrix = (at91_matrix_t *) ATMEL_BASE_MATRIX; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; /* Enable CS3 */ csa = readl(&matrix->csa) | AT91_MATRIX_CSA_EBI_CS3A; @@ -93,7 +92,7 @@ static void cpu9260_nand_hw_init(void) &smc->cs[3].mode); #endif - writel(1 << AT91SAM9260_ID_PIOC, &pmc->pcer); + writel(1 << ATMEL_ID_PIOC, &pmc->pcer); /* Configure RDY/BSY */ at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1); @@ -107,11 +106,11 @@ static void cpu9260_nand_hw_init(void) static void cpu9260_macb_hw_init(void) { unsigned long rstcmr; - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; - at91_rstc_t *rstc = (at91_rstc_t *) AT91_RSTC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; + at91_rstc_t *rstc = (at91_rstc_t *) ATMEL_BASE_RSTC; /* Enable clock */ - writel(1 << AT91SAM9260_ID_EMAC, &pmc->pcer); + writel(1 << ATMEL_ID_EMAC0, &pmc->pcer); at91_set_pio_pullup(AT91_PIO_PORTA, 17, 1); @@ -136,14 +135,14 @@ static void cpu9260_macb_hw_init(void) int board_early_init_f(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; - writel((1 << AT91SAM9260_ID_PIOA) | - (1 << AT91SAM9260_ID_PIOC) | - (1 << AT91SAM9260_ID_PIOB), + writel((1 << ATMEL_ID_PIOA) | + (1 << ATMEL_ID_PIOB) | + (1 << ATMEL_ID_PIOC), &pmc->pcer); - at91_serial_hw_init(); + at91_seriald_hw_init(); return 0; } @@ -184,7 +183,7 @@ int board_eth_init(bd_t *bis) { int rc = 0; #ifdef CONFIG_MACB - rc = macb_eth_initialize(0, (void *)AT91_EMAC_BASE, 0); + rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC0, 0); #endif return rc; } diff --git a/board/eukrea/cpu9260/led.c b/board/eukrea/cpu9260/led.c index d0906bc89..8d865eb87 100644 --- a/board/eukrea/cpu9260/led.c +++ b/board/eukrea/cpu9260/led.c @@ -28,17 +28,17 @@ #include <asm/arch/at91sam9260.h> #include <asm/arch/at91_pmc.h> #include <asm/arch/gpio.h> -#include <asm/arch/io.h> +#include <asm/io.h> static unsigned int saved_state[4] = {STATUS_LED_OFF, STATUS_LED_OFF, STATUS_LED_OFF, STATUS_LED_OFF}; void coloured_LED_init(void) { - at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE; + at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; /* Enable clock */ - writel(1 << AT91SAM9260_ID_PIOC, &pmc->pcer); + writel(1 << ATMEL_ID_PIOC, &pmc->pcer); at91_set_pio_output(CONFIG_RED_LED, 1); at91_set_pio_output(CONFIG_GREEN_LED, 1); diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h index a8ada2d41..ba9f797d6 100644 --- a/include/configs/cpu9260.h +++ b/include/configs/cpu9260.h @@ -37,8 +37,7 @@ #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 #define CONFIG_SYS_HZ 1000 - -#define CONFIG_ARM926EJS +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #if defined(CONFIG_CPU9G20) #define CONFIG_AT91SAM9G20 @@ -48,6 +47,8 @@ #error "Unknown board" #endif +#include <asm/arch/hardware.h> + #define CONFIG_AT91FAMILY #define CONFIG_ARCH_CPU_INIT #undef CONFIG_USE_IRQ @@ -251,10 +252,8 @@ #define CONFIG_AT91SAM9_WATCHDOG #define CONFIG_AT91_GPIO #define CONFIG_ATMEL_USART -#undef CONFIG_USART0 -#undef CONFIG_USART1 -#undef CONFIG_USART2 -#define CONFIG_USART3 +#define CONFIG_USART_BASE ATMEL_BASE_DBGU +#define CONFIG_USART_ID ATMEL_ID_SYS #define CONFIG_BOOTDELAY 3 |