diff options
| -rw-r--r-- | drivers/net/tsec.c | 31 |
1 files changed, 15 insertions, 16 deletions
diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c index 3428dd0cf..9ffc801bc 100644 --- a/drivers/net/tsec.c +++ b/drivers/net/tsec.c @@ -113,32 +113,31 @@ static void tsec_configure_serdes(struct tsec_private *priv) * result. * 2) Use the 8 most significant bits as a hash into a 256-entry * table. The table is controlled through 8 32-bit registers: - * gaddr0-7. gaddr0's MSB is entry 0, and gaddr7's LSB is - * gaddr7. This means that the 3 most significant bits in the + * gaddr0-7. gaddr0's MSB is entry 0, and gaddr7's LSB is entry + * 255. This means that the 3 most significant bits in the * hash index which gaddr register to use, and the 5 other bits * indicate which bit (assuming an IBM numbering scheme, which - * for PowerPC (tm) is usually the case) in the tregister holds + * for PowerPC (tm) is usually the case) in the register holds * the entry. */ static int tsec_mcast_addr(struct eth_device *dev, const u8 *mcast_mac, u8 set) { struct tsec_private *priv = privlist[1]; - volatile tsec_t *regs = priv->regs; - volatile u32 *reg_array, value; - u8 result, whichbit, whichreg; + struct tsec __iomem *regs = priv->regs; + u32 result, value; + u8 whichbit, whichreg; - result = (u8)((ether_crc(MAC_ADDR_LEN, mcast_mac) >> 24) & 0xff); - whichbit = result & 0x1f; /* the 5 LSB = which bit to set */ - whichreg = result >> 5; /* the 3 MSB = which reg to set it in */ - value = (1 << (31-whichbit)); + result = ether_crc(MAC_ADDR_LEN, mcast_mac); + whichbit = (result >> 24) & 0x1f; /* the 5 LSB = which bit to set */ + whichreg = result >> 29; /* the 3 MSB = which reg to set it in */ - reg_array = &(regs->hash.gaddr0); + value = 1 << (31-whichbit); + + if (set) + setbits_be32(®s->hash.gaddr0 + whichreg, value); + else + clrbits_be32(®s->hash.gaddr0 + whichreg, value); - if (set) { - reg_array[whichreg] |= value; - } else { - reg_array[whichreg] &= ~value; - } return 0; } #endif /* Multicast TFTP ? */ |