diff options
| -rw-r--r-- | board/freescale/mx53loco/mx53loco.c | 48 | ||||
| -rw-r--r-- | include/configs/mx53loco.h | 2 | ||||
| -rw-r--r-- | include/fsl_pmic.h | 10 |
3 files changed, 48 insertions, 12 deletions
diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c index 7ed5c4e4d..8f5ded988 100644 --- a/board/freescale/mx53loco/mx53loco.c +++ b/board/freescale/mx53loco/mx53loco.c @@ -38,6 +38,7 @@ #include <asm/gpio.h> #include <pmic.h> #include <dialog_pmic.h> +#include <fsl_pmic.h> DECLARE_GLOBAL_DATA_PTR; @@ -319,23 +320,46 @@ static void setup_iomux_i2c(void) static int power_init(void) { - unsigned int val, ret; + unsigned int val; + int ret = -1; struct pmic *p; - pmic_dialog_init(); - p = get_pmic(); + if (!i2c_probe(CONFIG_SYS_DIALOG_PMIC_I2C_ADDR)) { + pmic_dialog_init(); + p = get_pmic(); - /* Set VDDA to 1.25V */ - val = DA9052_BUCKCORE_BCOREEN | DA_BUCKCORE_VBCORE_1_250V; - ret = pmic_reg_write(p, DA9053_BUCKCORE_REG, val); + /* Set VDDA to 1.25V */ + val = DA9052_BUCKCORE_BCOREEN | DA_BUCKCORE_VBCORE_1_250V; + ret = pmic_reg_write(p, DA9053_BUCKCORE_REG, val); - ret |= pmic_reg_read(p, DA9053_SUPPLY_REG, &val); - val |= DA9052_SUPPLY_VBCOREGO; - ret |= pmic_reg_write(p, DA9053_SUPPLY_REG, val); + ret |= pmic_reg_read(p, DA9053_SUPPLY_REG, &val); + val |= DA9052_SUPPLY_VBCOREGO; + ret |= pmic_reg_write(p, DA9053_SUPPLY_REG, val); - /* Set Vcc peripheral to 1.35V */ - ret |= pmic_reg_write(p, DA9053_BUCKPRO_REG, 0x62); - ret |= pmic_reg_write(p, DA9053_SUPPLY_REG, 0x62); + /* Set Vcc peripheral to 1.30V */ + ret |= pmic_reg_write(p, DA9053_BUCKPRO_REG, 0x62); + ret |= pmic_reg_write(p, DA9053_SUPPLY_REG, 0x62); + } + + if (!i2c_probe(CONFIG_SYS_FSL_PMIC_I2C_ADDR)) { + pmic_init(); + p = get_pmic(); + + /* Set VDDGP to 1.25V for 1GHz on SW1 */ + pmic_reg_read(p, REG_SW_0, &val); + val = (val & ~SWx_VOLT_MASK_MC34708) | SWx_1_250V_MC34708; + ret = pmic_reg_write(p, REG_SW_0, val); + + /* Set VCC as 1.30V on SW2 */ + pmic_reg_read(p, REG_SW_1, &val); + val = (val & ~SWx_VOLT_MASK_MC34708) | SWx_1_300V_MC34708; + ret |= pmic_reg_write(p, REG_SW_1, val); + + /* Set global reset timer to 4s */ + pmic_reg_read(p, REG_POWER_CTL2, &val); + val = (val & ~TIMER_MASK_MC34708) | TIMER_4S_MC34708; + ret |= pmic_reg_write(p, REG_POWER_CTL2, val); + } return ret; } diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 8f43eecdd..87f6ed1e2 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -97,7 +97,9 @@ #define CONFIG_PMIC #define CONFIG_PMIC_I2C #define CONFIG_DIALOG_PMIC +#define CONFIG_PMIC_FSL #define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48 +#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8 /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE diff --git a/include/fsl_pmic.h b/include/fsl_pmic.h index 742f2e19f..3b7cd37fb 100644 --- a/include/fsl_pmic.h +++ b/include/fsl_pmic.h @@ -122,4 +122,14 @@ enum { /* Interrupt status 1 */ #define RTCRSTI (1 << 7) +/* MC34708 Definitions */ +#define SWx_VOLT_MASK_MC34708 0x3F +#define SWx_1_250V_MC34708 0x30 +#define SWx_1_300V_MC34708 0x34 +#define TIMER_MASK_MC34708 0x300 +#define TIMER_4S_MC34708 0x100 +#define VUSBSEL_MC34708 (1 << 2) +#define VUSBEN_MC34708 (1 << 3) +#define SWBST_CTRL 31 + #endif |