summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/powerpc/cpu/mpc8260/commproc.c2
-rw-r--r--arch/powerpc/cpu/mpc8260/i2c.c2
-rw-r--r--arch/powerpc/cpu/mpc8260/speed.c4
-rw-r--r--arch/powerpc/cpu/mpc83xx/speed.c5
-rw-r--r--arch/powerpc/cpu/mpc85xx/commproc.c2
-rw-r--r--arch/powerpc/cpu/mpc85xx/speed.c4
-rw-r--r--arch/powerpc/cpu/mpc8xx/fdt.c2
-rw-r--r--arch/powerpc/cpu/mpc8xx/speed.c2
-rw-r--r--arch/powerpc/include/asm/global_data.h14
-rw-r--r--arch/powerpc/lib/board.c2
-rw-r--r--common/cmd_immap.c2
-rw-r--r--drivers/qe/fdt.c4
-rw-r--r--drivers/qe/qe.c2
13 files changed, 26 insertions, 21 deletions
diff --git a/arch/powerpc/cpu/mpc8260/commproc.c b/arch/powerpc/cpu/mpc8260/commproc.c
index 082957ee0..e5bfed132 100644
--- a/arch/powerpc/cpu/mpc8260/commproc.c
+++ b/arch/powerpc/cpu/mpc8260/commproc.c
@@ -101,7 +101,7 @@ m8260_cpm_hostalloc(uint size, uint align)
* Baud rate clocks are zero-based in the driver code (as that maps
* to port numbers). Documentation uses 1-based numbering.
*/
-#define BRG_INT_CLK gd->brg_clk
+#define BRG_INT_CLK gd->arch.brg_clk
#define BRG_UART_CLK (BRG_INT_CLK / 16)
/* This function is used by UARTs, or anything else that uses a 16x
diff --git a/arch/powerpc/cpu/mpc8260/i2c.c b/arch/powerpc/cpu/mpc8260/i2c.c
index 7382cbadc..b720b1fb8 100644
--- a/arch/powerpc/cpu/mpc8260/i2c.c
+++ b/arch/powerpc/cpu/mpc8260/i2c.c
@@ -259,7 +259,7 @@ void i2c_init(int speed, int slaveadd)
* divide BRGCLK by 1)
*/
debug("[I2C] Setting rate...\n");
- i2c_setrate(gd->brg_clk, CONFIG_SYS_I2C_SPEED);
+ i2c_setrate(gd->arch.brg_clk, CONFIG_SYS_I2C_SPEED);
/* Set I2C controller in master mode */
i2c->i2c_i2com = 0x01;
diff --git a/arch/powerpc/cpu/mpc8260/speed.c b/arch/powerpc/cpu/mpc8260/speed.c
index bb50dee96..4ad1ec24c 100644
--- a/arch/powerpc/cpu/mpc8260/speed.c
+++ b/arch/powerpc/cpu/mpc8260/speed.c
@@ -145,7 +145,7 @@ int get_clocks (void)
gd->cpm_clk = gd->vco_out / 2;
gd->bus_clk = clkin;
gd->scc_clk = gd->vco_out / 4;
- gd->brg_clk = gd->vco_out / (1 << (2 * (dfbrg + 1)));
+ gd->arch.brg_clk = gd->vco_out / (1 << (2 * (dfbrg + 1)));
if (cp->b2c_mult > 0) {
gd->cpu_clk = (clkin * cp->b2c_mult) / 2;
@@ -231,7 +231,7 @@ int prt_8260_clks (void)
plldf, pllmf, pcidf);
printf (" - vco_out %10ld, scc_clk %10ld, brg_clk %10ld\n",
- gd->vco_out, gd->scc_clk, gd->brg_clk);
+ gd->vco_out, gd->scc_clk, gd->arch.brg_clk);
printf (" - cpu_clk %10ld, cpm_clk %10ld, bus_clk %10ld\n",
gd->cpu_clk, gd->cpm_clk, gd->bus_clk);
diff --git a/arch/powerpc/cpu/mpc83xx/speed.c b/arch/powerpc/cpu/mpc83xx/speed.c
index b8c05d159..21e8b0ab5 100644
--- a/arch/powerpc/cpu/mpc83xx/speed.c
+++ b/arch/powerpc/cpu/mpc83xx/speed.c
@@ -496,7 +496,7 @@ int get_clocks(void)
#endif
#if defined(CONFIG_QE)
gd->qe_clk = qe_clk;
- gd->brg_clk = brg_clk;
+ gd->arch.brg_clk = brg_clk;
#endif
#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x) || \
defined(CONFIG_MPC837x)
@@ -540,7 +540,8 @@ static int do_clocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
printf(" Coherent System Bus: %-4s MHz\n", strmhz(buf, gd->csb_clk));
#if defined(CONFIG_QE)
printf(" QE: %-4s MHz\n", strmhz(buf, gd->qe_clk));
- printf(" BRG: %-4s MHz\n", strmhz(buf, gd->brg_clk));
+ printf(" BRG: %-4s MHz\n",
+ strmhz(buf, gd->arch.brg_clk));
#endif
printf(" Local Bus Controller:%-4s MHz\n", strmhz(buf, gd->lbiu_clk));
printf(" Local Bus: %-4s MHz\n", strmhz(buf, gd->lclk_clk));
diff --git a/arch/powerpc/cpu/mpc85xx/commproc.c b/arch/powerpc/cpu/mpc85xx/commproc.c
index 292b723dc..7f10476a3 100644
--- a/arch/powerpc/cpu/mpc85xx/commproc.c
+++ b/arch/powerpc/cpu/mpc85xx/commproc.c
@@ -110,7 +110,7 @@ m8560_cpm_hostalloc(uint size, uint align)
* Baud rate clocks are zero-based in the driver code (as that maps
* to port numbers). Documentation uses 1-based numbering.
*/
-#define BRG_INT_CLK gd->brg_clk
+#define BRG_INT_CLK gd->arch.brg_clk
#define BRG_UART_CLK ((BRG_INT_CLK + 15) / 16)
/* This function is used by UARTS, or anything else that uses a 16x
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index 801ee078c..8a581ef76 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -395,7 +395,7 @@ int get_clocks (void)
#ifdef CONFIG_QE
gd->qe_clk = sys_info.freqQE;
- gd->brg_clk = gd->qe_clk / 2;
+ gd->arch.brg_clk = gd->qe_clk / 2;
#endif
/*
* The base clock for I2C depends on the actual SOC. Unfortunately,
@@ -438,7 +438,7 @@ int get_clocks (void)
gd->vco_out = 2*sys_info.freqSystemBus;
gd->cpm_clk = gd->vco_out / 2;
gd->scc_clk = gd->vco_out / 4;
- gd->brg_clk = gd->vco_out / (1 << (2 * (dfbrg + 1)));
+ gd->arch.brg_clk = gd->vco_out / (1 << (2 * (dfbrg + 1)));
#endif
if(gd->cpu_clk != 0) return (0);
diff --git a/arch/powerpc/cpu/mpc8xx/fdt.c b/arch/powerpc/cpu/mpc8xx/fdt.c
index 7130983ff..7edd7e420 100644
--- a/arch/powerpc/cpu/mpc8xx/fdt.c
+++ b/arch/powerpc/cpu/mpc8xx/fdt.c
@@ -37,7 +37,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
"clock-frequency", bd->bi_intfreq, 1);
do_fixup_by_compat_u32(blob, "fsl,cpm-brg", "clock-frequency",
- gd->brg_clk, 1);
+ gd->arch.brg_clk, 1);
/* Fixup ethernet MAC addresses */
fdt_fixup_ethernet(blob);
diff --git a/arch/powerpc/cpu/mpc8xx/speed.c b/arch/powerpc/cpu/mpc8xx/speed.c
index 6e13e5de0..091b49f24 100644
--- a/arch/powerpc/cpu/mpc8xx/speed.c
+++ b/arch/powerpc/cpu/mpc8xx/speed.c
@@ -192,7 +192,7 @@ void get_brgclk(uint sccr)
divider = 64;
break;
}
- gd->brg_clk = gd->cpu_clk/divider;
+ gd->arch.brg_clk = gd->cpu_clk/divider;
}
#if !defined(CONFIG_8xx_CPUCLK_DEFAULT)
diff --git a/arch/powerpc/include/asm/global_data.h b/arch/powerpc/include/asm/global_data.h
index df621da70..ac348c6f1 100644
--- a/arch/powerpc/include/asm/global_data.h
+++ b/arch/powerpc/include/asm/global_data.h
@@ -29,6 +29,15 @@
/* Architecture-specific global data */
struct arch_global_data {
+#if defined(CONFIG_8xx)
+ unsigned long brg_clk;
+#endif
+#if defined(CONFIG_CPM2)
+ unsigned long brg_clk;
+#endif
+#if defined(CONFIG_QE)
+ u32 brg_clk;
+#endif
};
/*
@@ -45,15 +54,11 @@ typedef struct global_data {
unsigned int baudrate;
unsigned long cpu_clk; /* CPU clock in Hz! */
unsigned long bus_clk;
-#if defined(CONFIG_8xx)
- unsigned long brg_clk;
-#endif
#if defined(CONFIG_CPM2)
/* There are many clocks on the MPC8260 - see page 9-5 */
unsigned long vco_out;
unsigned long cpm_clk;
unsigned long scc_clk;
- unsigned long brg_clk;
#ifdef CONFIG_PCI
unsigned long pci_clk;
#endif
@@ -106,7 +111,6 @@ typedef struct global_data {
#endif
#if defined(CONFIG_QE)
u32 qe_clk;
- u32 brg_clk;
uint mp_alloc_base;
uint mp_alloc_top;
#endif /* CONFIG_QE */
diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c
index 6a7bf4b6c..b1069a6c0 100644
--- a/arch/powerpc/lib/board.c
+++ b/arch/powerpc/lib/board.c
@@ -581,7 +581,7 @@ void board_init_f(ulong bootflag)
bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */
#if defined(CONFIG_CPM2)
bd->bi_cpmfreq = gd->cpm_clk;
- bd->bi_brgfreq = gd->brg_clk;
+ bd->bi_brgfreq = gd->arch.brg_clk;
bd->bi_sccfreq = gd->scc_clk;
bd->bi_vco = gd->vco_out;
#endif /* CONFIG_CPM2 */
diff --git a/common/cmd_immap.c b/common/cmd_immap.c
index 1f59c1e1d..fdf9489b2 100644
--- a/common/cmd_immap.c
+++ b/common/cmd_immap.c
@@ -453,7 +453,7 @@ static void prbrg (int n, uint val)
#if defined(CONFIG_8xx)
ulong clock = gd->cpu_clk;
#elif defined(CONFIG_8260)
- ulong clock = gd->brg_clk;
+ ulong clock = gd->arch.brg_clk;
#endif
printf ("BRG%d:", n);
diff --git a/drivers/qe/fdt.c b/drivers/qe/fdt.c
index 73e9060d5..1a123b8ce 100644
--- a/drivers/qe/fdt.c
+++ b/drivers/qe/fdt.c
@@ -77,13 +77,13 @@ void ft_qe_setup(void *blob)
do_fixup_by_prop_u32(blob, "device_type", "qe", 4,
"bus-frequency", gd->qe_clk, 1);
do_fixup_by_prop_u32(blob, "device_type", "qe", 4,
- "brg-frequency", gd->brg_clk, 1);
+ "brg-frequency", gd->arch.brg_clk, 1);
do_fixup_by_compat_u32(blob, "fsl,qe",
"clock-frequency", gd->qe_clk, 1);
do_fixup_by_compat_u32(blob, "fsl,qe",
"bus-frequency", gd->qe_clk, 1);
do_fixup_by_compat_u32(blob, "fsl,qe",
- "brg-frequency", gd->brg_clk, 1);
+ "brg-frequency", gd->arch.brg_clk, 1);
do_fixup_by_compat_u32(blob, "fsl,qe-gtm",
"clock-frequency", gd->qe_clk / 2, 1);
fdt_fixup_qe_firmware(blob);
diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c
index 345587be6..72c585cff 100644
--- a/drivers/qe/qe.c
+++ b/drivers/qe/qe.c
@@ -220,7 +220,7 @@ void qe_assign_page(uint snum, uint para_ram_base)
from CLKn pin, we have te change the function.
*/
-#define BRG_CLK (gd->brg_clk)
+#define BRG_CLK (gd->arch.brg_clk)
int qe_set_brg(uint brg, uint rate)
{
generated by cgit v1.2.3-70-g09d2 (git 2.51.2) at 2025-10-31 00:41:58 +0000