tools: updater: Remove remainders of dead board

tools/updater needs board/MAI/AmigaOneG3SE board
for compiling.
But AmigaOneG3SE board was already deleted
by Commit 953b7e6.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>

1 files changed, 0 insertions, 168 deletions

diff --git a/tools/updater/flash.c b/tools/updater/flash.c
deleted file mode 100644
index 538887207..000000000
--- a/tools/updater/flash.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * (C) Copyright 2000-2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <flash.h>
-
-extern flash_info_t  flash_info[]; /* info for FLASH chips */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-
-/*-----------------------------------------------------------------------
- * Set protection status for monitor sectors
- *
- * The monitor is always located in the _first_ Flash bank.
- * If necessary you have to map the second bank at lower addresses.
- */
-void
-flash_protect (int flag, ulong from, ulong to, flash_info_t *info)
-{
-	ulong b_end = info->start[0] + info->size - 1;	/* bank end address */
-	short s_end = info->sector_count - 1;	/* index of last sector */
-	int i;
-
-	/* Do nothing if input data is bad. */
-	if (info->sector_count == 0 || info->size == 0 || to < from) {
-		return;
-	}
-
-	/* There is nothing to do if we have no data about the flash
-	 * or the protect range and flash range don't overlap.
-	 */
-	if (info->flash_id == FLASH_UNKNOWN ||
-	    to < info->start[0] || from > b_end) {
-		return;
-	}
-
-	for (i=0; i<info->sector_count; ++i) {
-		ulong end;		/* last address in current sect	*/
-
-		end = (i == s_end) ? b_end : info->start[i + 1] - 1;
-
-		/* Update protection if any part of the sector
-		 * is in the specified range.
-		 */
-		if (from <= end && to >= info->start[i]) {
-			if (flag & FLAG_PROTECT_CLEAR) {
-#if defined(CONFIG_SYS_FLASH_PROTECTION)
-				flash_real_protect(info, i, 0);
-#else
-				info->protect[i] = 0;
-#endif	/* CONFIG_SYS_FLASH_PROTECTION */
-			}
-			else if (flag & FLAG_PROTECT_SET) {
-#if defined(CONFIG_SYS_FLASH_PROTECTION)
-				flash_real_protect(info, i, 1);
-#else
-				info->protect[i] = 1;
-#endif	/* CONFIG_SYS_FLASH_PROTECTION */
-			}
-		}
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-
-flash_info_t *
-addr2info (ulong addr)
-{
-#ifndef CONFIG_SPD823TS
-	flash_info_t *info;
-	int i;
-
-	for (i=0, info = &flash_info[0]; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i, ++info) {
-		if (info->flash_id != FLASH_UNKNOWN &&
-		    addr >= info->start[0] &&
-		    /* WARNING - The '- 1' is needed if the flash
-		     * is at the end of the address space, since
-		     * info->start[0] + info->size wraps back to 0.
-		     * Please don't change this unless you understand this.
-		     */
-		    addr <= info->start[0] + info->size - 1) {
-			return (info);
-		}
-	}
-#endif /* CONFIG_SPD823TS */
-
-	return (NULL);
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- * Make sure all target addresses are within Flash bounds,
- * and no protected sectors are hit.
- * Returns:
- * ERR_OK          0 - OK
- * ERR_TIMOUT      1 - write timeout
- * ERR_NOT_ERASED  2 - Flash not erased
- * ERR_PROTECTED   4 - target range includes protected sectors
- * ERR_INVAL       8 - target address not in Flash memory
- * ERR_ALIGN       16 - target address not aligned on boundary
- *			(only some targets require alignment)
- */
-int
-flash_write (char *src, ulong addr, ulong cnt)
-{
-#ifdef CONFIG_SPD823TS
-	return (ERR_TIMOUT);	/* any other error codes are possible as well */
-#else
-	int i;
-	ulong         end        = addr + cnt - 1;
-	flash_info_t *info_first = addr2info (addr);
-	flash_info_t *info_last  = addr2info (end );
-	flash_info_t *info;
-	int j;
-
-	if (cnt == 0) {
-		return (ERR_OK);
-	}
-
-	if (!info_first || !info_last) {
-		return (ERR_INVAL);
-	}
-
-	for (info = info_first; info <= info_last; ++info) {
-		ulong b_end = info->start[0] + info->size;	/* bank end addr */
-		short s_end = info->sector_count - 1;
-		for (i=0; i<info->sector_count; ++i) {
-			ulong e_addr = (i == s_end) ? b_end : info->start[i + 1];
-
-			if ((end >= info->start[i]) && (addr < e_addr) &&
-			    (info->protect[i] != 0) ) {
-				return (ERR_PROTECTED);
-			}
-		}
-	}
-
-	printf("\rWriting ");
-	for (j=0; j<20; j++) putc(177);
-	printf("\rWriting ");
-
-	/* finally write data to flash */
-	for (info = info_first; info <= info_last && cnt>0; ++info) {
-		ulong len;
-
-		len = info->start[0] + info->size - addr;
-		if (len > cnt)
-			len = cnt;
-
-		if ((i = write_buff(info, src, addr, len)) != 0) {
-			return (i);
-		}
-		cnt  -= len;
-		addr += len;
-		src  += len;
-	}
-	return (ERR_OK);
-#endif /* CONFIG_SPD823TS */
-}
-
-/*-----------------------------------------------------------------------
- */