Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm:
  drivers/rtc: add Marvell Integrated RTC
  Armada100: Add Board Support for Marvell GuruPlug-Display
  Armada100: MFP macro naming correction
  arm: auto gen asm-offsets.h for mb86r0x
  spear: fix build errors for spear3xx/spear600 platforms
  cosmetic: arm: lib/board.c: Coding Style cleanup
  ARM: versatile: fix board support
  SMDKV310: Enable device tree support
  SMDKV310: MMC_SPL: Fix building when using "make O="
  arm: a320: enable tagged list support
  arm: a320: fix multiline comment style
  ARMv7: u8500_href: Add missing header to fix compiler warning
  Removed unused define, CONFIG_ARMV7.
  avr32: add grasshopper (ICnova AP7000) board
  AT91/SPI: fix atmel_dataflash_spi.c to allow building without warnings
  MAKEALL: remove AT91 boards that are in boards.cfg
  AT91: Makes AT91SAM9263-EK build correctly against u-boot-atmel/master
  AT91: Makes AT91SAM9263 SoC build correctly against u-boot-atmel/master
  AT91: Board fix for AT91SAM9261-EK
  AT91: SoC fix at91sam9261_matrix.h
  AT91: Makes AT91SAM9RL-EK build correctly against u-boot-atmel/master
  AT91: Makes AT91SAM9RL SoC build correctly against u-boot-atmel/master
  AT91: change common at91sam9261 files to compile with new scheme
  AT91: fix mistake in at91sam9260_devices.c(spi1_hw_init)
  a/a/c/arm920t/at91/reset.c: drop obsolete CONFIG_AT91RM9200_USART
  README: fix arm920t/at91 path
  net/eth.c: drop obsolete at91rm9200 support
  README.at91-soc: remove AT91(RM9200) joining notice
  a/a/c/arm920t/cpu.c: remove CONFIG_AT91_LEGACY warning
  MAKEALL: remove obsolete at91rm9200 soc
  ARM: remove obsolete at91rm9200
  omap4: clock init support for omap4460
  omap4: support TPS programming
  omap: reuse omap3 gpio support in omap4
  omap4: sdram init changes for omap4460
  omap4: add omap4460 revision detection
  mkimage: Add OMAP boot image support
  omap: add MMC and FAT support to SPL
  omap: add basic SPL support
  armv7: start.S: fixes and enhancements for SPL
  omap4: automatic sdram detection
  omap4: calculate EMIF register values
  omap4: add sdram init support
  omap4: add clock support
  omap4: add OMAP4430 revision check
  omap4: cleanup pin mux data
  omap4: utility function to identify the context of hw init
  DA8xx: fix LPSC constants
  DA8xx: switch an enum to defines for consistency
  DA8xx: add MMC/SD controller addresses
  DaVinci EMAC: declare function for all DA8xx CPUs
  DA8xx: add generic GPIO driver
  DaVinci: rename gpio_defs.h to gpio.h
  omap3evm: eth: Include functions only when necessary
  omap3evm: Update ethernet reset sequence for Rev.G board
  omap3evm: eth: split function setup_net_chip
  omap3: Include array definition only when it is used
  omap730p2: fix build breaks
  omap2420h4: fix build breaks
  omap1610inn: fix build breaks
  omap1510inn: fix build breaks
  omap5912osk: fix build breaks
  omap1610h2: fix build breaks

1 files changed, 197 insertions, 0 deletions

diff --git a/tools/omap/clocks_get_m_n.c b/tools/omap/clocks_get_m_n.c
new file mode 100644
index 000000000..cfc176042
--- /dev/null
+++ b/tools/omap/clocks_get_m_n.c
@@ -0,0 +1,197 @@
+/*
+ * Program for finding M & N values for DPLLs
+ * To be run on Host PC
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <stdlib.h>
+#include <stdio.h>
+typedef unsigned int u32;
+#define MAX_N	127
+
+/*
+ * get_m_n_optimized() - Finds optimal DPLL multiplier(M) and divider(N)
+ * values based on the reference frequency, required output frequency,
+ * maximum tolerance for output frequency etc.
+ *
+ * target_freq_khz - output frequency required in KHz
+ * ref_freq_khz - reference(input) frequency in KHz
+ * m - pointer to computed M value
+ * n - pointer to computed N value
+ * tolerance_khz - tolerance for the output frequency. When the algorithm
+ * succeeds in finding vialble M and N values the corresponding output
+ * frequency will be in the range:
+ *	[target_freq_khz - tolerance_khz, target_freq_khz]
+ *
+ * Formula:
+ *	Fdpll = (2 * M * Fref) / (N + 1)
+ *
+ * Considerations for lock-time:
+ *	- Smaller the N, better lock-time, especially lock-time will be
+ *	- For acceptable lock-times:
+ *		Fref / (M + 1) >= 1 MHz
+ *
+ * Considerations for power:
+ *	- The difference in power for different N values giving the same
+ *	  output is negligible. So, we optimize for lock-time
+ *
+ * Hard-constraints:
+ *	- N can not be greater than 127(7 bit field for representing N)
+ *
+ * Usage:
+ *	$ gcc clocks_get_m_n.c
+ *	$ ./a.out
+ */
+int get_m_n_optimized(u32 target_freq_khz, u32 ref_freq_khz, u32 *m, u32 *n,
+			u32 tolerance_khz)
+{
+	u32 min_freq = target_freq_khz - tolerance_khz;
+	u32 max_freq = target_freq_khz;
+	u32 freq, freq_old;
+	*n = 1;
+	while (1) {
+		*m = min_freq / ref_freq_khz / 2 * (*n) ;
+		freq_old = 0;
+		while (1) {
+			freq = ref_freq_khz * 2 * (*m) / (*n);
+			if (abs(target_freq_khz - freq_old) <=
+				abs(target_freq_khz - freq)) {
+				freq = freq_old;
+				(*m)--;
+				break;
+			}
+			(*m)++;
+			freq_old = freq;
+		}
+		if (freq >= min_freq && freq <= max_freq)
+			break;
+		(*n)++;
+		if ((*n) > MAX_N + 1) {
+			printf("ref %d m %d n %d target %d : ",
+				ref_freq_khz, *m, *n, target_freq_khz);
+			printf("can not find m & n - please consider"
+				" increasing tolerance\n");
+			return -1;
+		}
+	}
+	(*n)--;
+	printf("ref %d m %d n %d target %d locked %d\n",
+		ref_freq_khz, *m, *n, target_freq_khz, freq);
+	if ((ref_freq_khz / (*n + 1)) < 1000) {
+		printf("\tREFCLK - CLKINP/(N+1) is less than 1 MHz - less than"
+			" ideal, locking time will be high!\n");
+	}
+	return 0;
+}
+
+void main(void)
+{
+	u32 m, n;
+	printf("\nMPU - 2000000\n");
+	get_m_n_optimized(2000000, 12000, &m, &n, 0);
+	get_m_n_optimized(2000000, 13000, &m, &n, 0);
+	get_m_n_optimized(2000000, 16800, &m, &n, 800);
+	get_m_n_optimized(2000000, 19200, &m, &n, 0);
+	get_m_n_optimized(2000000, 26000, &m, &n, 0);
+	get_m_n_optimized(2000000, 27000, &m, &n, 0);
+	get_m_n_optimized(2000000, 38400, &m, &n, 0);
+
+	printf("\nMPU - 1200000\n");
+	get_m_n_optimized(1200000, 12000, &m, &n, 0);
+	get_m_n_optimized(1200000, 13000, &m, &n, 0);
+	get_m_n_optimized(1200000, 16800, &m, &n, 800);
+	get_m_n_optimized(1200000, 19200, &m, &n, 0);
+	get_m_n_optimized(1200000, 26000, &m, &n, 0);
+	get_m_n_optimized(1200000, 27000, &m, &n, 0);
+	get_m_n_optimized(1200000, 38400, &m, &n, 0);
+
+	printf("\nMPU - 1584000\n");
+	get_m_n_optimized(1584000, 12000, &m, &n, 0);
+	get_m_n_optimized(1584000, 13000, &m, &n, 0);
+	get_m_n_optimized(1584000, 16800, &m, &n, 400);
+	get_m_n_optimized(1584000, 19200, &m, &n, 0);
+	get_m_n_optimized(1584000, 26000, &m, &n, 0);
+	get_m_n_optimized(1584000, 27000, &m, &n, 0);
+	get_m_n_optimized(1584000, 38400, &m, &n, 0);
+
+	printf("\nCore 1600000\n");
+	get_m_n_optimized(1600000, 12000, &m, &n, 0);
+	get_m_n_optimized(1600000, 13000, &m, &n, 0);
+	get_m_n_optimized(1600000, 16800, &m, &n, 200);
+	get_m_n_optimized(1600000, 19200, &m, &n, 0);
+	get_m_n_optimized(1600000, 26000, &m, &n, 0);
+	get_m_n_optimized(1600000, 27000, &m, &n, 0);
+	get_m_n_optimized(1600000, 38400, &m, &n, 0);
+
+	printf("\nPER 1536000\n");
+	get_m_n_optimized(1536000, 12000, &m, &n, 0);
+	get_m_n_optimized(1536000, 13000, &m, &n, 0);
+	get_m_n_optimized(1536000, 16800, &m, &n, 0);
+	get_m_n_optimized(1536000, 19200, &m, &n, 0);
+	get_m_n_optimized(1536000, 26000, &m, &n, 0);
+	get_m_n_optimized(1536000, 27000, &m, &n, 0);
+	get_m_n_optimized(1536000, 38400, &m, &n, 0);
+
+	printf("\nIVA 1862000\n");
+	get_m_n_optimized(1862000, 12000, &m, &n, 0);
+	get_m_n_optimized(1862000, 13000, &m, &n, 0);
+	get_m_n_optimized(1862000, 16800, &m, &n, 0);
+	get_m_n_optimized(1862000, 19200, &m, &n, 900);
+	get_m_n_optimized(1862000, 26000, &m, &n, 0);
+	get_m_n_optimized(1862000, 27000, &m, &n, 0);
+	get_m_n_optimized(1862000, 38400, &m, &n, 800);
+
+	printf("\nABE 196608 sys clk\n");
+	get_m_n_optimized(196608, 12000, &m, &n, 700);
+	get_m_n_optimized(196608, 13000, &m, &n, 200);
+	get_m_n_optimized(196608, 16800, &m, &n, 700);
+	get_m_n_optimized(196608, 19200, &m, &n, 400);
+	get_m_n_optimized(196608, 26000, &m, &n, 200);
+	get_m_n_optimized(196608, 27000, &m, &n, 900);
+	get_m_n_optimized(196608, 38400, &m, &n, 0);
+
+	printf("\nABE 196608 32K\n");
+	get_m_n_optimized(196608000/4, 32768, &m, &n, 0);
+
+	printf("\nUSB 1920000\n");
+	get_m_n_optimized(1920000, 12000, &m, &n, 0);
+	get_m_n_optimized(1920000, 13000, &m, &n, 0);
+	get_m_n_optimized(1920000, 16800, &m, &n, 0);
+	get_m_n_optimized(1920000, 19200, &m, &n, 0);
+	get_m_n_optimized(1920000, 26000, &m, &n, 0);
+	get_m_n_optimized(1920000, 27000, &m, &n, 0);
+	get_m_n_optimized(1920000, 38400, &m, &n, 0);
+
+	printf("\nCore ES1 1523712\n");
+	get_m_n_optimized(1524000, 12000, &m, &n, 100);
+	get_m_n_optimized(1524000, 13000, &m, &n, 0);
+	get_m_n_optimized(1524000, 16800, &m, &n, 0);
+	get_m_n_optimized(1524000, 19200, &m, &n, 0);
+	get_m_n_optimized(1524000, 26000, &m, &n, 0);
+	get_m_n_optimized(1524000, 27000, &m, &n, 0);
+
+	/* exact recommendation for SDPs */
+	get_m_n_optimized(1523712, 38400, &m, &n, 0);
+
+}