nand_spl: change out_be32 to raw_writel and depend on subsequent sync

This change reduces the SPL size by removing the redundant syncs produced
by out_be32 and just replies on one final sync

Done with:

sed -r '/in_be32/b; s/(out_be32)\(([^,]*),\s+(.*)\)/__raw_writel(\3, \2)/g' -i `git grep --name-only sdram_init nand_spl/`

Signed-off-by: Matthew McClintock <msm@freescale.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

1 files changed, 24 insertions, 24 deletions

diff --git a/nand_spl/board/freescale/p1_p2_rdb_pc/nand_boot.c b/nand_spl/board/freescale/p1_p2_rdb_pc/nand_boot.c
index fcff38249..4c140c157 100644
--- a/nand_spl/board/freescale/p1_p2_rdb_pc/nand_boot.c
+++ b/nand_spl/board/freescale/p1_p2_rdb_pc/nand_boot.c
@@ -36,32 +36,32 @@ void sdram_init(void)
 {
 	ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
 
-	out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS);
-	out_be32(&ddr->cs0_config, CONFIG_SYS_DDR_CS0_CONFIG);
+	__raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds);
+	__raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config);
 #if CONFIG_CHIP_SELECTS_PER_CTRL > 1
-	out_be32(&ddr->cs1_bnds, CONFIG_SYS_DDR_CS1_BNDS);
-	out_be32(&ddr->cs1_config, CONFIG_SYS_DDR_CS1_CONFIG);
+	__raw_writel(CONFIG_SYS_DDR_CS1_BNDS, &ddr->cs1_bnds);
+	__raw_writel(CONFIG_SYS_DDR_CS1_CONFIG, &ddr->cs1_config);
 #endif
-	out_be32(&ddr->timing_cfg_3, CONFIG_SYS_DDR_TIMING_3);
-	out_be32(&ddr->timing_cfg_0, CONFIG_SYS_DDR_TIMING_0);
-	out_be32(&ddr->timing_cfg_1, CONFIG_SYS_DDR_TIMING_1);
-	out_be32(&ddr->timing_cfg_2, CONFIG_SYS_DDR_TIMING_2);
+	__raw_writel(CONFIG_SYS_DDR_TIMING_3, &ddr->timing_cfg_3);
+	__raw_writel(CONFIG_SYS_DDR_TIMING_0, &ddr->timing_cfg_0);
+	__raw_writel(CONFIG_SYS_DDR_TIMING_1, &ddr->timing_cfg_1);
+	__raw_writel(CONFIG_SYS_DDR_TIMING_2, &ddr->timing_cfg_2);
 
-	out_be32(&ddr->sdram_cfg_2, CONFIG_SYS_DDR_CONTROL_2);
-	out_be32(&ddr->sdram_mode, CONFIG_SYS_DDR_MODE_1);
-	out_be32(&ddr->sdram_mode_2, CONFIG_SYS_DDR_MODE_2);
+	__raw_writel(CONFIG_SYS_DDR_CONTROL_2, &ddr->sdram_cfg_2);
+	__raw_writel(CONFIG_SYS_DDR_MODE_1, &ddr->sdram_mode);
+	__raw_writel(CONFIG_SYS_DDR_MODE_2, &ddr->sdram_mode_2);
 
-	out_be32(&ddr->sdram_interval, CONFIG_SYS_DDR_INTERVAL);
-	out_be32(&ddr->sdram_data_init, CONFIG_SYS_DDR_DATA_INIT);
-	out_be32(&ddr->sdram_clk_cntl, CONFIG_SYS_DDR_CLK_CTRL);
+	__raw_writel(CONFIG_SYS_DDR_INTERVAL, &ddr->sdram_interval);
+	__raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init);
+	__raw_writel(CONFIG_SYS_DDR_CLK_CTRL, &ddr->sdram_clk_cntl);
 
-	out_be32(&ddr->timing_cfg_4, CONFIG_SYS_DDR_TIMING_4);
-	out_be32(&ddr->timing_cfg_5, CONFIG_SYS_DDR_TIMING_5);
-	out_be32(&ddr->ddr_zq_cntl, CONFIG_SYS_DDR_ZQ_CONTROL);
-	out_be32(&ddr->ddr_wrlvl_cntl, CONFIG_SYS_DDR_WRLVL_CONTROL);
+	__raw_writel(CONFIG_SYS_DDR_TIMING_4, &ddr->timing_cfg_4);
+	__raw_writel(CONFIG_SYS_DDR_TIMING_5, &ddr->timing_cfg_5);
+	__raw_writel(CONFIG_SYS_DDR_ZQ_CONTROL, &ddr->ddr_zq_cntl);
+	__raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL, &ddr->ddr_wrlvl_cntl);
 
 	/* Set, but do not enable the memory */
-	out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL & ~SDRAM_CFG_MEM_EN);
+	__raw_writel(CONFIG_SYS_DDR_CONTROL & ~SDRAM_CFG_MEM_EN, &ddr->sdram_cfg);
 
 	asm volatile("sync;isync");
 	udelay(500);
@@ -92,13 +92,13 @@ void board_init_f(ulong bootflag)
 
 #ifndef CONFIG_QE
 	/* init DDR3 reset signal */
-	out_be32(&pgpio->gpdir, 0x02000000);
-	out_be32(&pgpio->gpodr, 0x00200000);
-	out_be32(&pgpio->gpdat, 0x00000000);
+	__raw_writel(0x02000000, &pgpio->gpdir);
+	__raw_writel(0x00200000, &pgpio->gpodr);
+	__raw_writel(0x00000000, &pgpio->gpdat);
 	udelay(1000);
-	out_be32(&pgpio->gpdat, 0x00200000);
+	__raw_writel(0x00200000, &pgpio->gpdat);
 	udelay(1000);
-	out_be32(&pgpio->gpdir, 0x00000000);
+	__raw_writel(0x00000000, &pgpio->gpdir);
 #endif
 
 	/* Initialize the DDR3 */