Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm:
  ARM: Add Calxeda Highbank platform
  dkb: make mmc command as default enabled
  Marvell: dkb: add mmc support
  ARM: pantheon: add mmc definition
  davinci: remove config.mk file from the sources
  ARM:AM33XX: Add support for TI AM335X EVM
  ARM:AM33XX: Added timer support
  ARM:AM33XX: Add emif/ddr support
  ARM:AM33XX: Add clock definitions
  ARM:AM33XX: Added support for AM33xx
  omap3/emif4: fix registers definition
  davinci: remove obsolete macro CONFIG_EMAC_MDIO_PHY_NUM
  davinci: emac: add support for more than 1 PHYs
  davinci: emac: add new features to autonegotiate for EMAC
  da850evm: Move LPSC configuration to board_early_init_f()
  omap4_panda: Build in cmd_gpio support on panda
  omap: Don't use gpio_free to change direction to input
  mmc: omap: Allow OMAP_HSMMC[23]_BASE to be unset
  OMAP3: overo : Add environment variable optargs to bootargs
  OMAP3: overo: Move ethernet CS4 configuration to execute based on board id
  OMAP3: overo : Use ttyO2 instead of ttyS2.
  da830: add support for NAND boot mode
  dm36x: revert cache disable patch
  dm644X: revert cache disable patch
  devkit8000: Add malloc space
  omap: spl: fix build break due to changes in FAT
  OMAP3 SPL: Provide weak omap_rev_string
  omap: beagle: Use ubifs instead of jffs2 for nand boot
  omap: overo: Disable pull-ups on camera PCLK, HS and VS signals
  omap: overo: Configure mux for gpio10
  SPL: Add DMA library
  omap3: Add interface for omap3 DMA
  omap3: Add DMA register accessors
  omap3: Add Base register for DMA
  arm, davinci: add missing LSPC define for MMC/SD1
  U-Boot/SPL: omap4: Make ddr pre-calculated timings as default.
  DaVinci: correct MDSTAT.STATE mask
  omap4: splitting padconfs into common, 4430 and 4460
  omap4: adding revision detection for 4460 ES1.1
  omap4: replacing OMAP4_CONTROL with OMAP4430_CONTROL
  gplug: fixed build error as a result of code cleanup patch
  kirkwood_spi: add dummy spi_init()
  gpio: mvmfp: reduce include platform file
  ARM: orion5x: reduce dependence of including platform file
  serial: reduce include platform file for marvell chip
  ARM: kirkwood: reduce dependence of including platform file
  ARM: armada100: reduce dependence of including platform file
  ARM: pantheon: reduce dependence of including platform file
  Armada100: Add env storage support for Marvell gplugD
  Armada100: Add SPI flash support for Marvell gplugD
  Armada100: Add SPI support for Marvell gplugD
  SPI: Add SPI driver support for Marvell Armada100
  dreamplug: initial board support.
  imx: fix coding style
  misc: pmic: drop old Freescale's pmic driver
  MX31: mx31pdk: use new pmic driver
  MX31: mx31ads: use new pmic driver
  MX31: mx31_litekit: use new pmic driver
  MX5: mx53evk: use new pmic driver
  MX5: mx51evk: use new pmic driver
  MX35: mx35pdk: use new pmic driver
  misc: pmic: addI2C  support to pmic_fsl driver
  misc: pmic: use I2C_SET_BUS in pmic I2C
  MX5: efikamx/efikasb: use new pmic driver
  MX3: qong: use new pmic driver
  RTC: Switch mc13783 to generic pmic code
  MX5: vision2: use new pmic driver
  misc: pmic: Freescale PMIC switches to generic PMIC driver
  misc:pmic:samsung Enable PMIC driver at GONI target
  misc:pmic:max8998 MAX8998 support at a new PMIC driver.
  misc:pmic:core New generic PMIC driver
  mx31pdk: Remove unneeded config
  mx31: provide readable WEIM CS accessor
  MX51: vision2: Set global macros
  I2C: Add i2c_get/set_speed() to mxc_i2c.c
  ARM: Update mach-types
  devkit8000: Add config to enable SPL MMC boot
  devkit8000: protect board_mmc_init
  arm, post: add missing post_time_ms for arm
  cosmetic, post: Codingstyle cleanup
  arm, logbuffer: make it compileclean
  tegra2: Enable MMC for Seaboard
  tegra2: Add more pinmux functions
  tegra2: Rename PIN_ to PINGRP_
  tegra2: Add more clock functions
  tegra2: Clean up board code a little
  tegra2: Rename CLOCK_PLL_ID to CLOCK_ID

1 files changed, 0 insertions, 235 deletions

diff --git a/drivers/misc/fsl_pmic.c b/drivers/misc/fsl_pmic.c
deleted file mode 100644
index 23255a59b..000000000
--- a/drivers/misc/fsl_pmic.c
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-#include <asm/errno.h>
-#include <linux/types.h>
-#include <fsl_pmic.h>
-
-static int check_param(u32 reg, u32 write)
-{
-	if (reg > 63 || write > 1) {
-		printf("<reg num> = %d is invalid. Should be less then 63\n",
-			reg);
-		return -1;
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_FSL_PMIC_I2C
-#include <i2c.h>
-
-u32 pmic_reg(u32 reg, u32 val, u32 write)
-{
-	unsigned char buf[4] = { 0 };
-	u32 ret_val = 0;
-
-	if (check_param(reg, write))
-		return -1;
-
-	if (write) {
-		buf[0] = (val >> 16) & 0xff;
-		buf[1] = (val >> 8) & 0xff;
-		buf[2] = (val) & 0xff;
-		if (i2c_write(CONFIG_SYS_FSL_PMIC_I2C_ADDR, reg, 1, buf, 3))
-			return -1;
-	} else {
-		if (i2c_read(CONFIG_SYS_FSL_PMIC_I2C_ADDR, reg, 1, buf, 3))
-			return -1;
-		ret_val = buf[0] << 16 | buf[1] << 8 | buf[2];
-	}
-
-	return ret_val;
-}
-#else /* SPI interface */
-#include <spi.h>
-static struct spi_slave *slave;
-
-struct spi_slave *pmic_spi_probe(void)
-{
-	return spi_setup_slave(CONFIG_FSL_PMIC_BUS,
-		CONFIG_FSL_PMIC_CS,
-		CONFIG_FSL_PMIC_CLK,
-		CONFIG_FSL_PMIC_MODE);
-}
-
-void pmic_spi_free(struct spi_slave *slave)
-{
-	if (slave)
-		spi_free_slave(slave);
-}
-
-u32 pmic_reg(u32 reg, u32 val, u32 write)
-{
-	u32 pmic_tx, pmic_rx;
-	u32 tmp;
-
-	if (!slave) {
-		slave = pmic_spi_probe();
-
-		if (!slave)
-			return -1;
-	}
-
-	if (check_param(reg, write))
-		return -1;
-
-	if (spi_claim_bus(slave))
-		return -1;
-
-	pmic_tx = (write << 31) | (reg << 25) | (val & 0x00FFFFFF);
-
-	tmp = cpu_to_be32(pmic_tx);
-
-	if (spi_xfer(slave, 4 << 3, &tmp, &pmic_rx,
-			SPI_XFER_BEGIN | SPI_XFER_END)) {
-		spi_release_bus(slave);
-		return -1;
-	}
-
-	if (write) {
-		pmic_tx &= ~(1 << 31);
-		tmp = cpu_to_be32(pmic_tx);
-		if (spi_xfer(slave, 4 << 3, &tmp, &pmic_rx,
-			SPI_XFER_BEGIN | SPI_XFER_END)) {
-			spi_release_bus(slave);
-			return -1;
-		}
-	}
-
-	spi_release_bus(slave);
-	return cpu_to_be32(pmic_rx);
-}
-#endif
-
-void pmic_reg_write(u32 reg, u32 value)
-{
-	pmic_reg(reg, value, 1);
-}
-
-u32 pmic_reg_read(u32 reg)
-{
-	return pmic_reg(reg, 0, 0);
-}
-
-void pmic_show_pmic_info(void)
-{
-	u32 rev_id;
-
-	rev_id = pmic_reg_read(REG_IDENTIFICATION);
-	printf("PMIC ID: 0x%08x [Rev: ", rev_id);
-	switch (rev_id & 0x1F) {
-	case 0x1:
-		puts("1.0");
-		break;
-	case 0x9:
-		puts("1.1");
-		break;
-	case 0xA:
-		puts("1.2");
-		break;
-	case 0x10:
-		puts("2.0");
-		break;
-	case 0x11:
-		puts("2.1");
-		break;
-	case 0x18:
-		puts("3.0");
-		break;
-	case 0x19:
-		puts("3.1");
-		break;
-	case 0x1A:
-		puts("3.2");
-		break;
-	case 0x2:
-		puts("3.2A");
-		break;
-	case 0x1B:
-		puts("3.3");
-		break;
-	case 0x1D:
-		puts("3.5");
-		break;
-	default:
-		puts("unknown");
-		break;
-	}
-	puts("]\n");
-}
-
-static void pmic_dump(int numregs)
-{
-	u32 val;
-	int i;
-
-	pmic_show_pmic_info();
-	for (i = 0; i < numregs; i++) {
-		val = pmic_reg_read(i);
-		if (!(i % 8))
-			printf ("\n0x%02x: ", i);
-		printf("%08x ", val);
-	}
-	puts("\n");
-}
-
-int do_pmic(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	char *cmd;
-	int nregs;
-	u32 val;
-
-	/* at least two arguments please */
-	if (argc < 2)
-		return cmd_usage(cmdtp);
-
-	cmd = argv[1];
-	if (strcmp(cmd, "dump") == 0) {
-		if (argc < 3)
-			return cmd_usage(cmdtp);
-
-		nregs = simple_strtoul(argv[2], NULL, 16);
-		pmic_dump(nregs);
-		return 0;
-	}
-	if (strcmp(cmd, "write") == 0) {
-		if (argc < 4)
-			return cmd_usage(cmdtp);
-
-		nregs = simple_strtoul(argv[2], NULL, 16);
-		val = simple_strtoul(argv[3], NULL, 16);
-		pmic_reg_write(nregs, val);
-		return 0;
-	}
-	/* No subcommand found */
-	return 1;
-}
-
-U_BOOT_CMD(
-	pmic,	CONFIG_SYS_MAXARGS, 1, do_pmic,
-	"Freescale PMIC (Atlas)",
-	"dump [numregs] - dump registers\n"
-	"pmic write <reg> <value> - write register"
-);