board: xilinx: Remove common folder

All these files was used for ancient xilinx drivers
which are finally gone.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Rommel Custodio <sessyargc@gmail.com>

1 files changed, 0 insertions, 306 deletions

diff --git a/board/xilinx/common/xpacket_fifo_v1_00_b.h b/board/xilinx/common/xpacket_fifo_v1_00_b.h
deleted file mode 100644
index 1cda0e8cc..000000000
--- a/board/xilinx/common/xpacket_fifo_v1_00_b.h
+++ /dev/null
@@ -1,306 +0,0 @@
-/******************************************************************************
-*
-*     Author: Xilinx, Inc.
-*
-*
-*     This program is free software; you can redistribute it and/or modify it
-*     under the terms of the GNU General Public License as published by the
-*     Free Software Foundation; either version 2 of the License, or (at your
-*     option) any later version.
-*
-*
-*     XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS" AS A
-*     COURTESY TO YOU. BY PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
-*     ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE, APPLICATION OR STANDARD,
-*     XILINX IS MAKING NO REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
-*     FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE RESPONSIBLE FOR OBTAINING
-*     ANY THIRD PARTY RIGHTS YOU MAY REQUIRE FOR YOUR IMPLEMENTATION.
-*     XILINX EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH RESPECT TO
-*     THE ADEQUACY OF THE IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY
-*     WARRANTIES OR REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM
-*     CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND
-*     FITNESS FOR A PARTICULAR PURPOSE.
-*
-*
-*     Xilinx hardware products are not intended for use in life support
-*     appliances, devices, or systems. Use in such applications is
-*     expressly prohibited.
-*
-*
-*     (c) Copyright 2002-2004 Xilinx Inc.
-*     All rights reserved.
-*
-*
-*     You should have received a copy of the GNU General Public License along
-*     with this program; if not, write to the Free Software Foundation, Inc.,
-*     675 Mass Ave, Cambridge, MA 02139, USA.
-*
-******************************************************************************/
-/*****************************************************************************/
-/*
-*
-* @file xpacket_fifo_v1_00_b.h
-*
-* This component is a common component because it's primary purpose is to
-* prevent code duplication in drivers. A driver which must handle a packet
-* FIFO uses this component rather than directly manipulating a packet FIFO.
-*
-* A FIFO is a device which has dual port memory such that one user may be
-* inserting data into the FIFO while another is consuming data from the FIFO.
-* A packet FIFO is designed for use with packet protocols such as Ethernet and
-* ATM.  It is typically only used with devices when DMA and/or Scatter Gather
-* is used.  It differs from a nonpacket FIFO in that it does not provide any
-* interrupts for thresholds of the FIFO such that it is less useful without
-* DMA.
-*
-* @note
-*
-* This component has the capability to generate an interrupt when an error
-* condition occurs.  It is the user's responsibility to provide the interrupt
-* processing to handle the interrupt. This component provides the ability to
-* determine if that interrupt is active, a deadlock condition, and the ability
-* to reset the FIFO to clear the condition. In this condition, the device which
-* is using the FIFO should also be reset to prevent other problems. This error
-* condition could occur as a normal part of operation if the size of the FIFO
-* is not setup correctly.  See the hardware IP specification for more details.
-*
-* <pre>
-* MODIFICATION HISTORY:
-*
-* Ver   Who  Date     Changes
-* ----- ---- -------- -----------------------------------------------
-* 1.00b rpm 03/26/02  First release
-* </pre>
-*
-*****************************************************************************/
-#ifndef XPACKET_FIFO_H		/* prevent circular inclusions */
-#define XPACKET_FIFO_H		/* by using protection macros */
-
-/***************************** Include Files *********************************/
-
-#include "xbasic_types.h"
-#include "xstatus.h"
-
-/************************** Constant Definitions *****************************/
-
-/*
- * These constants specify the FIFO type and are mutually exclusive
- */
-#define XPF_READ_FIFO_TYPE      0	/* a read FIFO */
-#define XPF_WRITE_FIFO_TYPE     1	/* a write FIFO */
-
-/*
- * These constants define the offsets to each of the registers from the
- * register base address, each of the constants are a number of bytes
- */
-#define XPF_RESET_REG_OFFSET            0UL
-#define XPF_MODULE_INFO_REG_OFFSET      0UL
-#define XPF_COUNT_STATUS_REG_OFFSET     4UL
-
-/*
- * This constant is used with the Reset Register
- */
-#define XPF_RESET_FIFO_MASK             0x0000000A
-
-/*
- * These constants are used with the Occupancy/Vacancy Count Register. This
- * register also contains FIFO status
- */
-#define XPF_COUNT_MASK                  0x0000FFFF
-#define XPF_DEADLOCK_MASK               0x20000000
-#define XPF_ALMOST_EMPTY_FULL_MASK      0x40000000
-#define XPF_EMPTY_FULL_MASK             0x80000000
-
-/**************************** Type Definitions *******************************/
-
-/*
- * The XPacketFifo driver instance data. The driver is required to allocate a
- * variable of this type for every packet FIFO in the device.
- */
-typedef struct {
-	u32 RegBaseAddress;	/* Base address of registers */
-	u32 IsReady;		/* Device is initialized and ready */
-	u32 DataBaseAddress;	/* Base address of data for FIFOs */
-} XPacketFifoV100b;
-
-/***************** Macros (Inline Functions) Definitions *********************/
-
-/*****************************************************************************/
-/*
-*
-* Reset the specified packet FIFO.  Resetting a FIFO will cause any data
-* contained in the FIFO to be lost.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-*
-* @return
-*
-* None.
-*
-* @note
-*
-* Signature: void XPF_V100B_RESET(XPacketFifoV100b *InstancePtr)
-*
-******************************************************************************/
-#define XPF_V100B_RESET(InstancePtr) \
-    XIo_Out32((InstancePtr)->RegBaseAddress + XPF_RESET_REG_OFFSET, XPF_RESET_FIFO_MASK);
-
-/*****************************************************************************/
-/*
-*
-* Get the occupancy count for a read packet FIFO and the vacancy count for a
-* write packet FIFO. These counts indicate the number of 32-bit words
-* contained (occupancy) in the FIFO or the number of 32-bit words available
-* to write (vacancy) in the FIFO.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-*
-* @return
-*
-* The occupancy or vacancy count for the specified packet FIFO.
-*
-* @note
-*
-* Signature: u32 XPF_V100B_GET_COUNT(XPacketFifoV100b *InstancePtr)
-*
-******************************************************************************/
-#define XPF_V100B_GET_COUNT(InstancePtr) \
-    (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
-    XPF_COUNT_MASK)
-
-/*****************************************************************************/
-/*
-*
-* Determine if the specified packet FIFO is almost empty. Almost empty is
-* defined for a read FIFO when there is only one data word in the FIFO.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-*
-* @return
-*
-* TRUE if the packet FIFO is almost empty, FALSE otherwise.
-*
-* @note
-*
-* Signature: u32 XPF_V100B_IS_ALMOST_EMPTY(XPacketFifoV100b *InstancePtr)
-*
-******************************************************************************/
-#define XPF_V100B_IS_ALMOST_EMPTY(InstancePtr) \
-    (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
-    XPF_ALMOST_EMPTY_FULL_MASK)
-
-/*****************************************************************************/
-/*
-*
-* Determine if the specified packet FIFO is almost full. Almost full is
-* defined for a write FIFO when there is only one available data word in the
-* FIFO.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-*
-* @return
-*
-* TRUE if the packet FIFO is almost full, FALSE otherwise.
-*
-* @note
-*
-* Signature: u32 XPF_V100B_IS_ALMOST_FULL(XPacketFifoV100b *InstancePtr)
-*
-******************************************************************************/
-#define XPF_V100B_IS_ALMOST_FULL(InstancePtr) \
-    (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
-    XPF_ALMOST_EMPTY_FULL_MASK)
-
-/*****************************************************************************/
-/*
-*
-* Determine if the specified packet FIFO is empty. This applies only to a
-* read FIFO.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-*
-* @return
-*
-* TRUE if the packet FIFO is empty, FALSE otherwise.
-*
-* @note
-*
-* Signature: u32 XPF_V100B_IS_EMPTY(XPacketFifoV100b *InstancePtr)
-*
-******************************************************************************/
-#define XPF_V100B_IS_EMPTY(InstancePtr) \
-    (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
-    XPF_EMPTY_FULL_MASK)
-
-/*****************************************************************************/
-/*
-*
-* Determine if the specified packet FIFO is full. This applies only to a
-* write FIFO.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-*
-* @return
-*
-* TRUE if the packet FIFO is full, FALSE otherwise.
-*
-* @note
-*
-* Signature: u32 XPF_V100B_IS_FULL(XPacketFifoV100b *InstancePtr)
-*
-******************************************************************************/
-#define XPF_V100B_IS_FULL(InstancePtr) \
-    (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
-    XPF_EMPTY_FULL_MASK)
-
-/*****************************************************************************/
-/*
-*
-* Determine if the specified packet FIFO is deadlocked.  This condition occurs
-* when the FIFO is full and empty at the same time and is caused by a packet
-* being written to the FIFO which exceeds the total data capacity of the FIFO.
-* It occurs because of the mark/restore features of the packet FIFO which allow
-* retransmission of a packet. The software should reset the FIFO and any devices
-* using the FIFO when this condition occurs.
-*
-* @param InstancePtr contains a pointer to the FIFO to operate on.
-*
-* @return
-*
-* TRUE if the packet FIFO is deadlocked, FALSE otherwise.
-*
-* @note
-*
-* This component has the capability to generate an interrupt when an error
-* condition occurs.  It is the user's responsibility to provide the interrupt
-* processing to handle the interrupt. This function provides the ability to
-* determine if a deadlock condition, and the ability to reset the FIFO to
-* clear the condition.
-*
-* In this condition, the device which is using the FIFO should also be reset
-* to prevent other problems. This error condition could occur as a normal part
-* of operation if the size of the FIFO is not setup correctly.
-*
-* Signature: u32 XPF_V100B_IS_DEADLOCKED(XPacketFifoV100b *InstancePtr)
-*
-******************************************************************************/
-#define XPF_V100B_IS_DEADLOCKED(InstancePtr) \
-    (XIo_In32((InstancePtr)->RegBaseAddress + XPF_COUNT_STATUS_REG_OFFSET) & \
-    XPF_DEADLOCK_MASK)
-
-/************************** Function Prototypes ******************************/
-
-/* Standard functions */
-
-XStatus XPacketFifoV100b_Initialize(XPacketFifoV100b * InstancePtr,
-				    u32 RegBaseAddress, u32 DataBaseAddress);
-XStatus XPacketFifoV100b_SelfTest(XPacketFifoV100b * InstancePtr, u32 FifoType);
-
-/* Data functions */
-
-XStatus XPacketFifoV100b_Read(XPacketFifoV100b * InstancePtr,
-			      u8 * ReadBufferPtr, u32 ByteCount);
-XStatus XPacketFifoV100b_Write(XPacketFifoV100b * InstancePtr,
-			       u8 * WriteBufferPtr, u32 ByteCount);
-
-#endif				/* end of protection macro */