CCM: remove code for yet another corpse

The CCM board has long reached EOL, and support for it is no longer
relevant in current versions of U-Boot.  Remove it.

Signed-off-by: Wolfgang Denk <wd@denx.de>

1 files changed, 0 insertions, 169 deletions

diff --git a/board/siemens/CCM/fpga_ccm.c b/board/siemens/CCM/fpga_ccm.c
deleted file mode 100644
index 50b08abce..000000000
--- a/board/siemens/CCM/fpga_ccm.c
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <mpc8xx.h>
-#include <commproc.h>
-#include <common.h>
-
-#include "../common/fpga.h"
-
-fpga_t fpga_list[] = {
-    { "PUMA" , PUMA_CONF_BASE ,
-      CONFIG_SYS_PC_PUMA_INIT , CONFIG_SYS_PC_PUMA_PROG , CONFIG_SYS_PC_PUMA_DONE  }
-};
-int fpga_count = sizeof(fpga_list) / sizeof(fpga_t);
-
-void can_driver_enable (void);
-void can_driver_disable (void);
-
-#define	_NOT_USED_	0xFFFFFFFF
-
-/*
- * PUMA access using UPM B
- */
-const uint puma_table[] =
-{
-	/*
-	 * Single Read. (Offset 0 in UPM RAM)
-	 */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_,
-	/*
-	 * Precharge and MRS
-	 */
-		    _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Burst Read. (Offset 8 in UPM RAM)
-	 */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Single Write. (Offset 18 in UPM RAM)
-	 */
-	0x0FFCF804, 0x0FFCF400, 0x3FFDFC47, /* last */
-					    _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Burst Write. (Offset 20 in UPM RAM)
-	 */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Refresh  (Offset 30 in UPM RAM)
-	 */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Exception. (Offset 3c in UPM RAM)
-	 */
-	0x7FFFFC07, /* last */
-		    _NOT_USED_, _NOT_USED_, _NOT_USED_,
-};
-
-
-ulong fpga_control (fpga_t* fpga, int cmd)
-{
-    volatile immap_t     *immr  = (immap_t *)CONFIG_SYS_IMMR;
-    volatile memctl8xx_t *memctl = &immr->im_memctl;
-
-    switch (cmd) {
-    case FPGA_INIT_IS_HIGH:
-	immr->im_ioport.iop_pcdir &= ~fpga->init_mask; /* input */
-	return (immr->im_ioport.iop_pcdat & fpga->init_mask) ? 1:0;
-
-    case FPGA_INIT_SET_LOW:
-	immr->im_ioport.iop_pcdir |=  fpga->init_mask; /* output */
-	immr->im_ioport.iop_pcdat &= ~fpga->init_mask;
-	break;
-
-    case FPGA_INIT_SET_HIGH:
-	immr->im_ioport.iop_pcdir |= fpga->init_mask; /* output */
-	immr->im_ioport.iop_pcdat |= fpga->init_mask;
-	break;
-
-    case FPGA_PROG_SET_LOW:
-	immr->im_ioport.iop_pcdat &= ~fpga->prog_mask;
-	break;
-
-    case FPGA_PROG_SET_HIGH:
-	immr->im_ioport.iop_pcdat |= fpga->prog_mask;
-	break;
-
-    case FPGA_DONE_IS_HIGH:
-	return (immr->im_ioport.iop_pcdat & fpga->done_mask) ? 1:0;
-
-    case FPGA_READ_MODE:
-	/* disable FPGA in memory controller */
-	memctl->memc_br4 = 0;
-	memctl->memc_or4 = PUMA_CONF_OR_READ;
-	memctl->memc_br4 = PUMA_CONF_BR_READ;
-
-	/* (re-) enable CAN drivers */
-	can_driver_enable ();
-
-	break;
-
-    case FPGA_LOAD_MODE:
-	/* disable FPGA in memory controller */
-	memctl->memc_br4 = 0;
-	/*
-	 * We must disable the CAN drivers first because
-	 * they use UPM B, too.
-	 */
-	can_driver_disable ();
-	/*
-	 * Configure UPMB for FPGA
-	 */
-	upmconfig(UPMB,(uint *)puma_table,sizeof(puma_table)/sizeof(uint));
-	memctl->memc_or4 = PUMA_CONF_OR_LOAD;
-	memctl->memc_br4 = PUMA_CONF_BR_LOAD;
-	break;
-
-    case FPGA_GET_ID:
-	return *(volatile ulong *)fpga->conf_base;
-
-    case FPGA_INIT_PORTS:
-	immr->im_ioport.iop_pcpar &= ~fpga->init_mask; /* INIT I/O */
-	immr->im_ioport.iop_pcso  &= ~fpga->init_mask;
-	immr->im_ioport.iop_pcdir &= ~fpga->init_mask;
-
-	immr->im_ioport.iop_pcpar &= ~fpga->prog_mask; /* PROG Output */
-	immr->im_ioport.iop_pcso  &= ~fpga->prog_mask;
-	immr->im_ioport.iop_pcdir |=  fpga->prog_mask;
-
-	immr->im_ioport.iop_pcpar &= ~fpga->done_mask; /* DONE Input */
-	immr->im_ioport.iop_pcso  &= ~fpga->done_mask;
-	immr->im_ioport.iop_pcdir &= ~fpga->done_mask;
-
-	break;
-
-    }
-    return 0;
-}