Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm:
  M28: Cleanup memsize.o OOT build
  i.MX28: Move SPL to arch/arm/cpu/arm926ejs/mx28
  M28: Fix typo
  M28: Document that units has to be set to sectors on SD bootcard
  i.mx: i.mx6q: add the initial support for i.mx6q ARM2 board
  i.mx: mxc_gpio: add the i.mx6q support
  i.mx: add the initial support for freescale i.MX6Q processor
  i.mx: introduce the armv7/imx-common folder
  S5PC2XX: Rename S5pc2XX to exynos
  tegra2: Don't use board pointer before it is set up
  tegra2: Remove unneeded 'dynamic ram size' message
  tegra2: Remove unused low-level Tegra2 UART code
  tegra2: Remove unneeded config option
  tegra2: Remove unneeded boot code
  tegra2: Enable instruction cache
  arm: Move CP15 init out of cpu_init_crit()
  tegra2: Simplify tegra_start() boot path
  tegra2: Add arch_cpu_init() to fire up Cortex-A9
  tegra2: Use new GPIO APIs in gpio_config_uart()
  tegra2: Add support for Ventana
  tegra2: Modify MMC driver to handle power and cd GPIOs
  tegra2: Move board_mmc_init into board files

1 files changed, 3 insertions, 55 deletions

diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
index 370a25906..c806a6b3c 100644
--- a/board/nvidia/common/board.c
+++ b/board/nvidia/common/board.c
@@ -33,10 +33,6 @@
 #include <asm/arch/uart.h>
 #include "board.h"
 
-#ifdef CONFIG_TEGRA2_MMC
-#include <mmc.h>
-#endif
-
 DECLARE_GLOBAL_DATA_PTR;
 
 const struct tegra2_sysinfo sysinfo = {
@@ -100,33 +96,6 @@ static void pin_mux_uart(void)
 #endif	/* CONFIG_TEGRA2_ENABLE_UARTD */
 }
 
-#ifdef CONFIG_TEGRA2_MMC
-/*
- * Routine: pin_mux_mmc
- * Description: setup the pin muxes/tristate values for the SDMMC(s)
- */
-static void pin_mux_mmc(void)
-{
-	/* SDMMC4: config 3, x8 on 2nd set of pins */
-	pinmux_set_func(PINGRP_ATB, PMUX_FUNC_SDIO4);
-	pinmux_set_func(PINGRP_GMA, PMUX_FUNC_SDIO4);
-	pinmux_set_func(PINGRP_GME, PMUX_FUNC_SDIO4);
-
-	pinmux_tristate_disable(PINGRP_ATB);
-	pinmux_tristate_disable(PINGRP_GMA);
-	pinmux_tristate_disable(PINGRP_GME);
-
-	/* SDMMC3: SDIO3_CLK, SDIO3_CMD, SDIO3_DAT[3:0] */
-	pinmux_set_func(PINGRP_SDB, PMUX_FUNC_SDIO3);
-	pinmux_set_func(PINGRP_SDC, PMUX_FUNC_SDIO3);
-	pinmux_set_func(PINGRP_SDD, PMUX_FUNC_SDIO3);
-
-	pinmux_tristate_disable(PINGRP_SDC);
-	pinmux_tristate_disable(PINGRP_SDD);
-	pinmux_tristate_disable(PINGRP_SDB);
-}
-#endif
-
 /*
  * Routine: board_init
  * Description: Early hardware init.
@@ -142,30 +111,12 @@ int board_init(void)
 	return 0;
 }
 
-#ifdef CONFIG_TEGRA2_MMC
-/* this is a weak define that we are overriding */
-int board_mmc_init(bd_t *bd)
-{
-	debug("board_mmc_init called\n");
-	/* Enable muxes, etc. for SDMMC controllers */
-	pin_mux_mmc();
-	gpio_config_mmc();
-
-	debug("board_mmc_init: init eMMC\n");
-	/* init dev 0, eMMC chip, with 4-bit bus */
-	tegra2_mmc_init(0, 4);
-
-	debug("board_mmc_init: init SD slot\n");
-	/* init dev 1, SD slot, with 4-bit bus */
-	tegra2_mmc_init(1, 4);
-
-	return 0;
-}
-#endif
-
 #ifdef CONFIG_BOARD_EARLY_INIT_F
 int board_early_init_f(void)
 {
+	/* We didn't do this init in start.S, so do it now */
+	cpu_init_cp15();
+
 	/* Initialize essential common plls */
 	clock_early_init();
 
@@ -177,9 +128,6 @@ int board_early_init_f(void)
 
 	/* Initialize periph GPIOs */
 	gpio_config_uart();
-
-	/* Init UART, scratch regs, and start CPU */
-	tegra2_start();
 	return 0;
 }
 #endif	/* EARLY_INIT */