mpc5xxx: Add MVBC_P board support

The MVBC_P is a MPC5200B based camera system with Intel Gigabit ethernet
controller (using e1000) and custom Altera Cyclone-II FPGA on PCI.

Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

1 files changed, 325 insertions, 0 deletions

diff --git a/board/matrix_vision/mvbc_p/mvbc_p.c b/board/matrix_vision/mvbc_p/mvbc_p.c
new file mode 100644
index 000000000..b61e84e38
--- /dev/null
+++ b/board/matrix_vision/mvbc_p/mvbc_p.c
@@ -0,0 +1,325 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
+ * (C) Copyright 2005-2007
+ * Andre Schwarz, Matrix Vision GmbH, andre.schwarz@matrix-vision.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc5xxx.h>
+#include <malloc.h>
+#include <pci.h>
+#include <i2c.h>
+#include <environment.h>
+#include <fdt_support.h>
+#include <asm/io.h>
+#include "fpga.h"
+#include "mvbc_p.h"
+
+#define SDRAM_MODE	0x00CD0000
+#define SDRAM_CONTROL	0x504F0000
+#define SDRAM_CONFIG1	0xD2322800
+#define SDRAM_CONFIG2	0x8AD70000
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void sdram_start (int hi_addr)
+{
+	long hi_bit = hi_addr ? 0x01000000 : 0;
+
+	/* unlock mode register */
+	out_be32((u32*)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | 0x80000000 | hi_bit);
+
+	/* precharge all banks */
+	out_be32((u32*)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | 0x80000002 | hi_bit);
+
+	/* precharge all banks */
+	out_be32((u32*)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | 0x80000002 | hi_bit);
+
+	/* auto refresh */
+	out_be32((u32*)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | 0x80000004 | hi_bit);
+
+	/* set mode register */
+	out_be32((u32*)MPC5XXX_SDRAM_MODE, SDRAM_MODE);
+
+	/* normal operation */
+	out_be32((u32*)MPC5XXX_SDRAM_CTRL, SDRAM_CONTROL | hi_bit);
+}
+
+phys_addr_t initdram (int board_type)
+{
+	ulong dramsize = 0;
+	ulong test1,
+	      test2;
+
+	/* setup SDRAM chip selects */
+	out_be32((u32*)MPC5XXX_SDRAM_CS0CFG, 0x0000001e);
+
+	/* setup config registers */
+	out_be32((u32*)MPC5XXX_SDRAM_CONFIG1, SDRAM_CONFIG1);
+	out_be32((u32*)MPC5XXX_SDRAM_CONFIG2, SDRAM_CONFIG2);
+
+	/* find RAM size using SDRAM CS0 only */
+	sdram_start(0);
+	test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	sdram_start(1);
+	test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+	if (test1 > test2) {
+		sdram_start(0);
+		dramsize = test1;
+	} else
+		dramsize = test2;
+
+	if (dramsize < (1 << 20))
+		dramsize = 0;
+
+	if (dramsize > 0)
+		out_be32((u32*)MPC5XXX_SDRAM_CS0CFG, 0x13 +
+			__builtin_ffs(dramsize >> 20) - 1);
+	else
+		out_be32((u32*)MPC5XXX_SDRAM_CS0CFG, 0);
+
+	return dramsize;
+}
+
+void mvbc_init_gpio(void)
+{
+	struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO;
+
+	printf("Ports : 0x%08x\n", gpio->port_config);
+	printf("PORCFG: 0x%08x\n", *(vu_long*)MPC5XXX_CDM_PORCFG);
+
+	out_be32(&gpio->simple_ddr, SIMPLE_DDR);
+	out_be32(&gpio->simple_dvo, SIMPLE_DVO);
+	out_be32(&gpio->simple_ode, SIMPLE_ODE);
+	out_be32(&gpio->simple_gpioe, SIMPLE_GPIOEN);
+
+	out_be32((u32*)&gpio->sint_ode, SINT_ODE);
+	out_be32((u32*)&gpio->sint_ddr, SINT_DDR);
+	out_be32((u32*)&gpio->sint_dvo, SINT_DVO);
+	out_be32((u32*)&gpio->sint_inten, SINT_INTEN);
+	out_be32((u32*)&gpio->sint_itype, SINT_ITYPE);
+	out_be32((u32*)&gpio->sint_gpioe, SINT_GPIOEN);
+
+	out_8((u8*)MPC5XXX_WU_GPIO_ODE, WKUP_ODE);
+	out_8((u8*)MPC5XXX_WU_GPIO_DIR, WKUP_DIR);
+	out_8((u8*)MPC5XXX_WU_GPIO_DATA_O, WKUP_DO);
+	out_8((u8*)MPC5XXX_WU_GPIO_ENABLE, WKUP_EN);
+
+	printf("simple_gpioe: 0x%08x\n", gpio->simple_gpioe);
+	printf("sint_gpioe  : 0x%08x\n", gpio->sint_gpioe);
+}
+
+void reset_environment(void)
+{
+	char *s, sernr[64];
+
+	printf("\n*** RESET ENVIRONMENT ***\n");
+	memset(sernr, 0, sizeof(sernr));
+	s = getenv("serial#");
+	if (s) {
+		printf("found serial# : %s\n", s);
+		strncpy(sernr, s, 64);
+	}
+	gd->env_valid = 0;
+	env_relocate();
+	if (s)
+		setenv("serial#", sernr);
+}
+
+int misc_init_r(void)
+{
+	char *s = getenv("reset_env");
+
+	if (!s) {
+		if (in_8((u8*)MPC5XXX_WU_GPIO_DATA_I) & MPC5XXX_GPIO_WKUP_6)
+			return 0;
+		udelay(50000);
+		if (in_8((u8*)MPC5XXX_WU_GPIO_DATA_I) & MPC5XXX_GPIO_WKUP_6)
+			return 0;
+		udelay(50000);
+		if (in_8((u8*)MPC5XXX_WU_GPIO_DATA_I) & MPC5XXX_GPIO_WKUP_6)
+			return 0;
+	}
+	printf(" === FACTORY RESET ===\n");
+	reset_environment();
+	saveenv();
+
+	return -1;
+}
+
+int checkboard(void)
+{
+	mvbc_init_gpio();
+	printf("Board: Matrix Vision mvBlueCOUGAR-P\n");
+
+	return 0;
+}
+
+void flash_preinit(void)
+{
+	/*
+	 * Now, when we are in RAM, enable flash write
+	 * access for detection process.
+	 * Note that CS_BOOT cannot be cleared when
+	 * executing in flash.
+	 */
+	clrbits_be32((u32*)MPC5XXX_BOOTCS_CFG, 0x1);
+}
+
+void flash_afterinit(ulong size)
+{
+	out_be32((u32*)MPC5XXX_BOOTCS_START, START_REG(CFG_BOOTCS_START |
+		size));
+	out_be32((u32*)MPC5XXX_CS0_START, START_REG(CFG_BOOTCS_START |
+		size));
+	out_be32((u32*)MPC5XXX_BOOTCS_STOP, STOP_REG(CFG_BOOTCS_START | size,
+		size));
+	out_be32((u32*)MPC5XXX_CS0_STOP, STOP_REG(CFG_BOOTCS_START | size,
+		size));
+}
+
+void pci_mvbc_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
+{
+	unsigned char line = 0xff;
+	u32 base;
+
+	if (PCI_BUS(dev) == 0) {
+		switch (PCI_DEV (dev)) {
+		case 0xa: /* FPGA */
+			line = 3;
+			pci_hose_read_config_dword(hose, dev, PCI_BASE_ADDRESS_0, &base);
+			printf("found FPA - enable arbitration\n");
+			writel(0x03, (u32*)(base + 0x80c0));
+			writel(0xf0, (u32*)(base + 0x8080));
+			break;
+		case 0xb: /* LAN */
+			line = 2;
+			break;
+		case 0x1a:
+			break;
+		default:
+			printf ("***pci_scan: illegal dev = 0x%08x\n", PCI_DEV (dev));
+			break;
+		}
+		pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, line);
+	}
+}
+
+struct pci_controller hose = {
+	fixup_irq:pci_mvbc_fixup_irq
+};
+
+int mvbc_p_load_fpga(void)
+{
+	size_t data_size = 0;
+	void *fpga_data = NULL;
+	char *datastr = getenv("fpgadata");
+	char *sizestr = getenv("fpgadatasize");
+
+	if (datastr)
+		fpga_data = (void *)simple_strtoul(datastr, NULL, 16);
+	if (sizestr)
+		data_size = (size_t)simple_strtoul(sizestr, NULL, 16);
+
+	return fpga_load(0, fpga_data, data_size);
+}
+
+extern void pci_mpc5xxx_init(struct pci_controller *);
+
+void pci_init_board(void)
+{
+	char *s;
+	int load_fpga = 1;
+
+	mvbc_p_init_fpga();
+	s = getenv("skip_fpga");
+	if (s) {
+		printf("found 'skip_fpga' -> FPGA _not_ loaded !\n");
+		load_fpga = 0;
+	}
+	if (load_fpga) {
+		printf("loading FPGA ... ");
+		mvbc_p_load_fpga();
+		printf("done\n");
+	}
+	pci_mpc5xxx_init(&hose);
+}
+
+u8 *dhcp_vendorex_prep(u8 *e)
+{
+	char *ptr;
+
+	/* DHCP vendor-class-identifier = 60 */
+	if ((ptr = getenv("dhcp_vendor-class-identifier"))) {
+		*e++ = 60;
+		*e++ = strlen(ptr);
+		while (*ptr)
+			*e++ = *ptr++;
+	}
+	/* DHCP_CLIENT_IDENTIFIER = 61 */
+	if ((ptr = getenv("dhcp_client_id"))) {
+		*e++ = 61;
+		*e++ = strlen(ptr);
+		while (*ptr)
+			*e++ = *ptr++;
+	}
+
+	return e;
+}
+
+u8 *dhcp_vendorex_proc (u8 *popt)
+{
+	return NULL;
+}
+
+void show_boot_progress(int val)
+{
+	struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO;
+
+	switch(val) {
+	case 0: /* FPGA ok */
+		setbits_be32(&gpio->simple_dvo, 0x80);
+		break;
+	case 1:
+		setbits_be32(&gpio->simple_dvo, 0x40);
+		break;
+	case 12:
+		setbits_be32(&gpio->simple_dvo, 0x20);
+		break;
+	case 15:
+		setbits_be32(&gpio->simple_dvo, 0x10);
+		break;
+	default:
+		break;
+	}
+
+}
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	ft_cpu_setup(blob, bd);
+	fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+}