General help message cleanup

Many of the help messages were not really helpful; for example, many
commands that take no arguments would not print a correct synopsis
line, but "No additional help available." which is not exactly wrong,
but not helpful either.

Commit ``Make "usage" messages more helpful.'' changed this
partially. But it also became clear that lots of "Usage" and "Help"
messages (fields "usage" and "help" in struct cmd_tbl_s respective)
were actually redundant.

This patch cleans this up - for example:

Before:
	=> help dtt
	dtt - Digital Thermometer and Thermostat

	Usage:
	dtt         - Read temperature from digital thermometer and thermostat.

After:
	=> help dtt
	dtt - Read temperature from Digital Thermometer and Thermostat

	Usage:
	dtt

Signed-off-by: Wolfgang Denk <wd@denx.de>

1 files changed, 12 insertions, 11 deletions

diff --git a/board/bc3450/cmd_bc3450.c b/board/bc3450/cmd_bc3450.c
index aa46e5812..271ffb1d1 100644
--- a/board/bc3450/cmd_bc3450.c
+++ b/board/bc3450/cmd_bc3450.c
@@ -198,7 +198,7 @@ U_BOOT_CMD (dip, 1, 1, cmd_dip,
 	    "\n"
 	    "     - prints the state of the dip switch and/or\n"
 	    "       external configuration inputs as hex value.\n"
-	    "     - \"Config 1\" is the LSB\n");
+	    "     - \"Config 1\" is the LSB");
 
 
 /*
@@ -229,7 +229,7 @@ static int cmd_buz (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 
 U_BOOT_CMD (buz, 2, 1, cmd_buz,
 	    "turns buzzer on/off",
-	    "\n" "buz <on/off>\n" "     - turns the buzzer on or off\n");
+	    "\n" "buz <on/off>\n" "     - turns the buzzer on or off");
 #endif /* CONFIG_BC3450_BUZZER */
 
 
@@ -326,14 +326,14 @@ U_BOOT_CMD (fp, 3, 1, cmd_fp,
 	    "\n"
 	    "fp bl <on/off>\n"
 	    "     - turns the CCFL backlight of the display on/off\n"
-	    "fp <on/off>\n" "     - turns the whole display on/off\n"
+	    "fp <on/off>\n" "     - turns the whole display on/off"
 #ifdef CONFIG_BC3450_CRT
+	    "\n"
 	    "fp crt <on/off>\n"
-	    "     - enables/disables the crt output (debug only)\n"
+	    "     - enables/disables the crt output (debug only)"
 #endif /* CONFIG_BC3450_CRT */
 	);
 
-
 /*
  * temp - DS1620 thermometer
  */
@@ -524,7 +524,7 @@ static int cmd_temp (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 
 U_BOOT_CMD (temp, 3, 1, cmd_temp,
 	    "print current temperature",
-	    "\n" "temp\n" "     - print current temperature\n");
+	    "\n" "temp\n" "     - print current temperature");
 
 #ifdef CONFIG_BC3450_CAN
 /*
@@ -818,10 +818,11 @@ int cmd_test (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 
 U_BOOT_CMD (test, 2, 1, cmd_test, "unit test routines", "\n"
 #ifdef CONFIG_BC3450_CAN
-	    "test can\n"
-	    "     - connect CAN1 (X8) with CAN2 (X9) for this test\n"
+	"test can\n"
+	"     - connect CAN1 (X8) with CAN2 (X9) for this test\n"
 #endif /* CONFIG_BC3450_CAN */
-	    "test unit-off\n"
-	    "     - turns off the BC3450 unit\n"
-	    "       WARNING: Unsaved environment variables will be lost!\n");
+	"test unit-off\n"
+	"     - turns off the BC3450 unit\n"
+	"       WARNING: Unsaved environment variables will be lost!"
+);
 #endif