Move arch/ppc to arch/powerpc

As discussed on the list, move "arch/ppc" to "arch/powerpc" to
better match the Linux directory structure.

Please note that this patch also changes the "ppc" target in
MAKEALL to "powerpc" to match this new infrastructure. But "ppc"
is kept as an alias for now, to not break compatibility with
scripts using this name.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Anatolij Gustschin <agust@denx.de>

1 files changed, 442 insertions, 0 deletions

diff --git a/arch/powerpc/cpu/mpc5xxx/i2c.c b/arch/powerpc/cpu/mpc5xxx/i2c.c
new file mode 100644
index 000000000..4f7f71632
--- /dev/null
+++ b/arch/powerpc/cpu/mpc5xxx/i2c.c
@@ -0,0 +1,442 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_HARD_I2C
+
+#include <mpc5xxx.h>
+#include <i2c.h>
+
+#if (CONFIG_SYS_I2C_MODULE == 2)
+#define I2C_BASE	MPC5XXX_I2C2
+#elif (CONFIG_SYS_I2C_MODULE == 1)
+#define I2C_BASE	MPC5XXX_I2C1
+#else
+#error CONFIG_SYS_I2C_MODULE is not properly configured
+#endif
+
+#define I2C_TIMEOUT	6667
+#define I2C_RETRIES	3
+
+struct mpc5xxx_i2c_tap {
+	int scl2tap;
+	int tap2tap;
+};
+
+static int  mpc_reg_in    (volatile u32 *reg);
+static void mpc_reg_out   (volatile u32 *reg, int val, int mask);
+static int  wait_for_bb   (void);
+static int  wait_for_pin  (int *status);
+static int  do_address    (uchar chip, char rdwr_flag);
+static int  send_bytes    (uchar chip, char *buf, int len);
+static int  receive_bytes (uchar chip, char *buf, int len);
+static int  mpc_get_fdr   (int);
+
+static int mpc_reg_in(volatile u32 *reg)
+{
+	int ret = *reg >> 24;
+	__asm__ __volatile__ ("eieio");
+	return ret;
+}
+
+static void mpc_reg_out(volatile u32 *reg, int val, int mask)
+{
+	int tmp;
+
+	if (!mask) {
+		*reg = val << 24;
+	} else {
+		tmp = mpc_reg_in(reg);
+		*reg = ((tmp & ~mask) | (val & mask)) << 24;
+	}
+	__asm__ __volatile__ ("eieio");
+
+	return;
+}
+
+static int wait_for_bb(void)
+{
+	struct mpc5xxx_i2c *regs    = (struct mpc5xxx_i2c *)I2C_BASE;
+	int                 timeout = I2C_TIMEOUT;
+	int                 status;
+
+	status = mpc_reg_in(&regs->msr);
+
+	while (timeout-- && (status & I2C_BB)) {
+#if 1
+		volatile int temp;
+		mpc_reg_out(&regs->mcr, I2C_STA, I2C_STA);
+		temp = mpc_reg_in(&regs->mdr);
+		mpc_reg_out(&regs->mcr, 0, I2C_STA);
+		mpc_reg_out(&regs->mcr, 0, 0);
+		mpc_reg_out(&regs->mcr, I2C_EN, 0);
+#endif
+		udelay(15);
+		status = mpc_reg_in(&regs->msr);
+	}
+
+	return (status & I2C_BB);
+}
+
+static int wait_for_pin(int *status)
+{
+	struct mpc5xxx_i2c *regs    = (struct mpc5xxx_i2c *)I2C_BASE;
+	int                 timeout = I2C_TIMEOUT;
+
+	*status = mpc_reg_in(&regs->msr);
+
+	while (timeout-- && !(*status & I2C_IF)) {
+		udelay(15);
+		*status = mpc_reg_in(&regs->msr);
+	}
+
+	if (!(*status & I2C_IF)) {
+		return -1;
+	}
+
+	mpc_reg_out(&regs->msr, 0, I2C_IF);
+
+	return 0;
+}
+
+static int do_address(uchar chip, char rdwr_flag)
+{
+	struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
+	int                 status;
+
+	chip <<= 1;
+
+	if (rdwr_flag) {
+		chip |= 1;
+	}
+
+	mpc_reg_out(&regs->mcr, I2C_TX, I2C_TX);
+	mpc_reg_out(&regs->mdr, chip, 0);
+
+	if (wait_for_pin(&status)) {
+		return -2;
+	}
+
+	if (status & I2C_RXAK) {
+		return -3;
+	}
+
+	return 0;
+}
+
+static int send_bytes(uchar chip, char *buf, int len)
+{
+	struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
+	int                 wrcount;
+	int                 status;
+
+	for (wrcount = 0; wrcount < len; ++wrcount) {
+
+		mpc_reg_out(&regs->mdr, buf[wrcount], 0);
+
+		if (wait_for_pin(&status)) {
+			break;
+		}
+
+		if (status & I2C_RXAK) {
+			break;
+		}
+
+	}
+
+	return !(wrcount == len);
+}
+
+static int receive_bytes(uchar chip, char *buf, int len)
+{
+	struct mpc5xxx_i2c *regs    = (struct mpc5xxx_i2c *)I2C_BASE;
+	int                 dummy   = 1;
+	int                 rdcount = 0;
+	int                 status;
+	int                 i;
+
+	mpc_reg_out(&regs->mcr, 0, I2C_TX);
+
+	for (i = 0; i < len; ++i) {
+		buf[rdcount] = mpc_reg_in(&regs->mdr);
+
+		if (dummy) {
+			dummy = 0;
+		} else {
+			rdcount++;
+		}
+
+
+		if (wait_for_pin(&status)) {
+			return -4;
+		}
+	}
+
+	mpc_reg_out(&regs->mcr, I2C_TXAK, I2C_TXAK);
+	buf[rdcount++] = mpc_reg_in(&regs->mdr);
+
+	if (wait_for_pin(&status)) {
+		return -5;
+	}
+
+	mpc_reg_out(&regs->mcr, 0, I2C_TXAK);
+
+	return 0;
+}
+
+#if defined(CONFIG_SYS_I2C_INIT_MPC5XXX)
+
+#define FDR510(x) (u8) (((x & 0x20) >> 3) | (x & 0x3))
+#define FDR432(x) (u8) ((x & 0x1C) >> 2)
+/*
+ * Reset any i2c devices that may have been interrupted during a system reset.
+ * Normally this would be accomplished by clocking the line until SCL and SDA
+ * are released and then sending a start condtiion (From an Atmel datasheet).
+ * There is no direct access to the i2c pins so instead create start commands
+ * through the i2c interface.  Send a start command then delay for the SDA Hold
+ * time, repeat this by disabling/enabling the bus a total of 9 times.
+ */
+static void send_reset(void)
+{
+	struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
+	int i;
+	u32 delay;
+	u8 fdr;
+	int SDA_Tap[] = { 3, 3, 4, 4, 1, 1, 2, 2};
+	struct mpc5xxx_i2c_tap scltap[] = {
+		{4, 1},
+		{4, 2},
+		{6, 4},
+		{6, 8},
+		{14, 16},
+		{30, 32},
+		{62, 64},
+		{126, 128}
+	};
+
+	fdr = (u8)mpc_reg_in(&regs->mfdr);
+
+	delay = scltap[FDR432(fdr)].scl2tap + ((SDA_Tap[FDR510(fdr)] - 1) * \
+		scltap[FDR432(fdr)].tap2tap) + 3;
+
+	for (i = 0; i < 9; i++) {
+		mpc_reg_out(&regs->mcr, I2C_EN|I2C_STA|I2C_TX, I2C_INIT_MASK);
+		udelay(delay);
+		mpc_reg_out(&regs->mcr, 0, I2C_INIT_MASK);
+		udelay(delay);
+	}
+
+	mpc_reg_out(&regs->mcr, I2C_EN, I2C_INIT_MASK);
+}
+#endif /* CONFIG_SYS_I2c_INIT_MPC5XXX */
+
+/**************** I2C API ****************/
+
+void i2c_init(int speed, int saddr)
+{
+	struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
+
+	mpc_reg_out(&regs->mcr, 0, 0);
+	mpc_reg_out(&regs->madr, saddr << 1, 0);
+
+	/* Set clock
+	 */
+	mpc_reg_out(&regs->mfdr, mpc_get_fdr(speed), 0);
+
+	/* Enable module
+	 */
+	mpc_reg_out(&regs->mcr, I2C_EN, I2C_INIT_MASK);
+	mpc_reg_out(&regs->msr, 0, I2C_IF);
+
+#if defined(CONFIG_SYS_I2C_INIT_MPC5XXX)
+	send_reset();
+#endif
+	return;
+}
+
+static int mpc_get_fdr(int speed)
+{
+	static int fdr = -1;
+
+	if (fdr == -1) {
+		ulong best_speed = 0;
+		ulong divider;
+		ulong ipb, scl;
+		ulong bestmatch = 0xffffffffUL;
+		int best_i = 0, best_j = 0, i, j;
+		int SCL_Tap[] = { 9, 10, 12, 15, 5, 6, 7, 8};
+		struct mpc5xxx_i2c_tap scltap[] = {
+			{4, 1},
+			{4, 2},
+			{6, 4},
+			{6, 8},
+			{14, 16},
+			{30, 32},
+			{62, 64},
+			{126, 128}
+		};
+
+		ipb = gd->ipb_clk;
+		for (i = 7; i >= 0; i--) {
+			for (j = 7; j >= 0; j--) {
+				scl = 2 * (scltap[j].scl2tap +
+					(SCL_Tap[i] - 1) * scltap[j].tap2tap + 2);
+				if (ipb <= speed*scl) {
+					if ((speed*scl - ipb) < bestmatch) {
+						bestmatch = speed*scl - ipb;
+						best_i = i;
+						best_j = j;
+						best_speed = ipb/scl;
+					}
+				}
+			}
+		}
+		divider = (best_i & 3) | ((best_i & 4) << 3) | (best_j << 2);
+		if (gd->flags & GD_FLG_RELOC) {
+			fdr = divider;
+		} else {
+			if (gd->have_console)
+				printf("%ld kHz, ", best_speed / 1000);
+			return divider;
+		}
+	}
+
+	return fdr;
+}
+
+int i2c_probe(uchar chip)
+{
+	struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
+	int                 i;
+
+	for (i = 0; i < I2C_RETRIES; i++) {
+		mpc_reg_out(&regs->mcr, I2C_STA, I2C_STA);
+
+		if (! do_address(chip, 0)) {
+			mpc_reg_out(&regs->mcr, 0, I2C_STA);
+			udelay(500);
+			break;
+		}
+
+		mpc_reg_out(&regs->mcr, 0, I2C_STA);
+		udelay(500);
+	}
+
+	return (i == I2C_RETRIES);
+}
+
+int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
+{
+	char                xaddr[4];
+	struct mpc5xxx_i2c * regs        = (struct mpc5xxx_i2c *)I2C_BASE;
+	int                  ret         = -1;
+
+	xaddr[0] = (addr >> 24) & 0xFF;
+	xaddr[1] = (addr >> 16) & 0xFF;
+	xaddr[2] = (addr >>  8) & 0xFF;
+	xaddr[3] =  addr	& 0xFF;
+
+	if (wait_for_bb()) {
+		if (gd->have_console)
+			printf("i2c_read: bus is busy\n");
+		goto Done;
+	}
+
+	mpc_reg_out(&regs->mcr, I2C_STA, I2C_STA);
+	if (do_address(chip, 0)) {
+		if (gd->have_console)
+			printf("i2c_read: failed to address chip\n");
+		goto Done;
+	}
+
+	if (send_bytes(chip, &xaddr[4-alen], alen)) {
+		if (gd->have_console)
+			printf("i2c_read: send_bytes failed\n");
+		goto Done;
+	}
+
+	mpc_reg_out(&regs->mcr, I2C_RSTA, I2C_RSTA);
+	if (do_address(chip, 1)) {
+		if (gd->have_console)
+			printf("i2c_read: failed to address chip\n");
+		goto Done;
+	}
+
+	if (receive_bytes(chip, (char *)buf, len)) {
+		if (gd->have_console)
+			printf("i2c_read: receive_bytes failed\n");
+		goto Done;
+	}
+
+	ret = 0;
+Done:
+	mpc_reg_out(&regs->mcr, 0, I2C_STA);
+	return ret;
+}
+
+int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
+{
+	char               xaddr[4];
+	struct mpc5xxx_i2c *regs        = (struct mpc5xxx_i2c *)I2C_BASE;
+	int                 ret         = -1;
+
+	xaddr[0] = (addr >> 24) & 0xFF;
+	xaddr[1] = (addr >> 16) & 0xFF;
+	xaddr[2] = (addr >>  8) & 0xFF;
+	xaddr[3] =  addr	& 0xFF;
+
+	if (wait_for_bb()) {
+		if (gd->have_console)
+			printf("i2c_write: bus is busy\n");
+		goto Done;
+	}
+
+	mpc_reg_out(&regs->mcr, I2C_STA, I2C_STA);
+	if (do_address(chip, 0)) {
+		if (gd->have_console)
+			printf("i2c_write: failed to address chip\n");
+		goto Done;
+	}
+
+	if (send_bytes(chip, &xaddr[4-alen], alen)) {
+		if (gd->have_console)
+			printf("i2c_write: send_bytes failed\n");
+		goto Done;
+	}
+
+	if (send_bytes(chip, (char *)buf, len)) {
+		if (gd->have_console)
+			printf("i2c_write: send_bytes failed\n");
+		goto Done;
+	}
+
+	ret = 0;
+Done:
+	mpc_reg_out(&regs->mcr, 0, I2C_STA);
+	return ret;
+}
+
+#endif	/* CONFIG_HARD_I2C */