Move architecture-specific includes to arch/$ARCH/include/asm

This helps to clean up the include/ directory so that it only contains
non-architecture-specific headers and also matches Linux's directory
layout which many U-Boot developers are already familiar with.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

1 files changed, 160 insertions, 0 deletions

diff --git a/arch/arm/include/asm/arch-arm720t/netarm_eth_module.h b/arch/arm/include/asm/arch-arm720t/netarm_eth_module.h
new file mode 100644
index 000000000..8f2f36981
--- /dev/null
+++ b/arch/arm/include/asm/arch-arm720t/netarm_eth_module.h
@@ -0,0 +1,160 @@
+/*
+ * include/asm-armnommu/arch-netarm/netarm_eth_module.h
+ *
+ * Copyright (C) 2000 NETsilicon, Inc.
+ * Copyright (C) 2000 WireSpeed Communications Corporation
+ *
+ * This software is copyrighted by WireSpeed. LICENSEE agrees that
+ * it will not delete this copyright notice, trademarks or protective
+ * notices from any copy made by LICENSEE.
+ *
+ * This software is provided "AS-IS" and any express or implied
+ * warranties or conditions, including but not limited to any
+ * implied warranties of merchantability and fitness for a particular
+ * purpose regarding this software. In no event shall WireSpeed
+ * be liable for any indirect, consequential, or incidental damages,
+ * loss of profits or revenue, loss of use or data, or interruption
+ * of business, whether the alleged damages are labeled in contract,
+ * tort, or indemnity.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * author(s) : Jackie Smith Cashion
+ *             David Smith
+ */
+
+#ifndef __NETARM_ETH_MODULE_REGISTERS_H
+#define __NETARM_ETH_MODULE_REGISTERS_H
+
+/* ETH unit register offsets */
+
+#define	NETARM_ETH_MODULE_BASE		(0xFF800000)
+
+#define get_eth_reg_addr(c) ((volatile unsigned int *)(NETARM_ETH_MODULE_BASE + (c)))
+
+#define NETARM_ETH_GEN_CTRL		(0x000) /* Ethernet Gen Control Reg */
+#define NETARM_ETH_GEN_STAT		(0x004) /* Ethernet Gen Status Reg */
+#define NETARM_ETH_FIFO_DAT1            (0x008) /* Fifo Data Reg 1 */
+#define NETARM_ETH_FIFO_DAT2            (0x00C) /* Fifo Data Reg 2 */
+#define NETARM_ETH_TX_STAT              (0x010) /* Transmit Status Reg */
+#define NETARM_ETH_RX_STAT              (0x014) /* Receive Status Reg */
+
+#define NETARM_ETH_MAC_CFG		(0x400) /* MAC Configuration Reg */
+#define NETARM_ETH_PCS_CFG		(0x408) /* PCS Configuration Reg */
+#define NETARM_ETH_STL_CFG		(0x410) /* STL Configuration Reg */
+#define NETARM_ETH_B2B_IPG_GAP_TMR	(0x440) /* Back-to-back IPG
+						   Gap Timer Reg */
+#define NETARM_ETH_NB2B_IPG_GAP_TMR	(0x444) /* Non Back-to-back
+						   IPG Gap Timer Reg */
+#define NETARM_ETH_MII_CMD		(0x540) /* MII (PHY) Command Reg */
+#define NETARM_ETH_MII_ADDR		(0x544) /* MII Address Reg */
+#define NETARM_ETH_MII_WRITE		(0x548) /* MII Write Data Reg */
+#define NETARM_ETH_MII_READ		(0x54C) /* MII Read Data Reg */
+#define NETARM_ETH_MII_IND		(0x550) /* MII Indicators Reg */
+#define NETARM_ETH_MIB_CRCEC		(0x580) /* (MIB) CRC Error Counter */
+#define NETARM_ETH_MIB_AEC		(0x584) /* Alignment Error Counter */
+#define NETARM_ETH_MIB_CEC		(0x588) /* Code Error Counter */
+#define NETARM_ETH_MIB_LFC		(0x58C) /* Long Frame Counter */
+#define NETARM_ETH_MIB_SFC		(0x590) /* Short Frame Counter */
+#define NETARM_ETH_MIB_LCC		(0x594) /* Late Collision Counter */
+#define NETARM_ETH_MIB_EDC		(0x598) /* Excessive Deferral
+						   Counter */
+#define NETARM_ETH_MIB_MCC		(0x59C) /* Maximum Collision Counter */
+#define NETARM_ETH_SAL_FILTER		(0x5C0) /* SAL Station Address
+						   Filter Reg */
+#define NETARM_ETH_SAL_STATION_ADDR_1	(0x5C4) /* SAL Station Address
+						   Reg */
+#define NETARM_ETH_SAL_STATION_ADDR_2	(0x5C8)
+#define NETARM_ETH_SAL_STATION_ADDR_3	(0x5CC)
+#define NETARM_ETH_SAL_HASH_TBL_1	(0x5D0) /* SAL Multicast Hash Table*/
+#define NETARM_ETH_SAL_HASH_TBL_2	(0x5D4)
+#define NETARM_ETH_SAL_HASH_TBL_3	(0x5D8)
+#define NETARM_ETH_SAL_HASH_TBL_4	(0x5DC)
+
+/* select bitfield defintions */
+
+/* Ethernet General Control Register (0xFF80_0000) */
+
+#define NETARM_ETH_GCR_ERX		(0x80000000) /* Enable Receive FIFO */
+#define NETARM_ETH_GCR_ERXDMA		(0x40000000) /* Enable Receive DMA */
+#define NETARM_ETH_GCR_ETX		(0x00800000) /* Enable Transmit FIFO */
+#define NETARM_ETH_GCR_ETXDMA		(0x00400000) /* Enable Transmit DMA */
+#define NETARM_ETH_GCR_ETXWM_50		(0x00100000) /* Transmit FIFO Water
+							Mark.  Start transmit
+							when FIFO is 50%
+							full. */
+#define NETARM_ETH_GCR_PNA		(0x00000400) /* pSOS pNA Buffer
+							Descriptor Format */
+
+/* Ethernet General Status Register (0xFF80_0004) */
+
+#define NETARM_ETH_GST_RXFDB            (0x30000000)
+#define NETARM_ETH_GST_RXREGR		(0x08000000) /* Receive Register
+							Ready */
+#define NETARM_ETH_GST_RXFIFOH		(0x04000000)
+#define NETARM_ETH_GST_RXBR		(0x02000000)
+#define NETARM_ETH_GST_RXSKIP		(0x01000000)
+
+#define NETARM_ETH_GST_TXBC             (0x00020000)
+
+
+/* Ethernet Transmit Status Register (0xFF80_0010) */
+
+#define NETARM_ETH_TXSTAT_TXOK          (0x00008000)
+
+
+/* Ethernet Receive Status Register (0xFF80_0014) */
+
+#define NETARM_ETH_RXSTAT_SIZE          (0xFFFF0000)
+#define NETARM_ETH_RXSTAT_RXOK          (0x00002000)
+
+
+/* PCS Configuration Register (0xFF80_0408) */
+
+#define NETARM_ETH_PCSC_NOCFR		(0x1) /* Disable Ciphering */
+#define NETARM_ETH_PCSC_ENJAB		(0x2) /* Enable Jabber Protection */
+#define NETARM_ETH_PCSC_CLKS_25M	(0x0) /* 25 MHz Clock Speed Select */
+#define NETARM_ETH_PCSC_CLKS_33M	(0x4) /* 33 MHz Clock Speed Select */
+
+/* STL Configuration Register (0xFF80_0410) */
+
+#define NETARM_ETH_STLC_RXEN		(0x2) /* Enable Packet Receiver */
+#define NETARM_ETH_STLC_AUTOZ		(0x4) /* Auto Zero Statistics */
+
+/* MAC Configuration Register (0xFF80_0400) */
+
+#define NETARM_ETH_MACC_HUGEN		(0x1) /* Enable Unlimited Transmit
+						 Frame Sizes */
+#define NETARM_ETH_MACC_PADEN		(0x4) /* Automatic Pad Fill Frames
+						 to 64 Bytes */
+#define NETARM_ETH_MACC_CRCEN		(0x8) /* Append CRC to Transmit
+						 Frames */
+
+/* MII (PHY) Command Register (0xFF80_0540) */
+
+#define NETARM_ETH_MIIC_RSTAT		(0x1) /* Single Scan for Read Data */
+
+/* MII Indicators Register (0xFF80_0550) */
+
+#define NETARM_ETH_MIII_BUSY		(0x1) /* MII I/F Busy with
+						 Read/Write */
+
+/* SAL Station Address Filter Register (0xFF80_05C0) */
+
+#define NETARM_ETH_SALF_PRO		(0x8) /* Enable Promiscuous Mode */
+#define NETARM_ETH_SALF_PRM		(0x4) /* Accept All Multicast
+						 Packets */
+#define NETARM_ETH_SALF_PRA		(0x2) /* Accept Mulitcast Packets
+						 using Hash Table */
+#define NETARM_ETH_SALF_BROAD		(0x1) /* Accept All Broadcast
+						 Packets */
+
+
+#endif /* __NETARM_GEN_MODULE_REGISTERS_H */