Configuration changes for ADS5121 Rev 3

ADS5121 Rev 3 board is now the default config

config targets are now

ads5121_config
    Rev 3 board with
	PCI
	M41T62 on board RTC
	512MB DRAM

ads5121_rev2_config
    Rev 2 board with
	No PCI
	256MB DRAM

Signed-off-by: Martha Marx <mmarx@silicontkx.com>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: John Rigby <jrigby@freescale.com>

5 files changed, 67 insertions, 16 deletions

diff --git a/Makefile b/Makefile
index 6a734d139..e557d0d36 100644
--- a/Makefile
+++ b/Makefile
@@ -750,12 +750,11 @@ motionpro_config:	unconfig
 ## MPC512x Systems
 #########################################################################
 ads5121_config \
-ads5121_PCI_config \
-	:		 unconfig
+ads5121_rev2_config	\
+	: unconfig
 	@mkdir -p $(obj)include
-	@if [ "$(findstring _PCI_,$@)" ] ; then \
-		echo "#define CONFIG_PCI"  >>$(obj)include/config.h ; \
-		$(XECHO) "... with PCI enabled" ; \
+	@if [ "$(findstring rev2,$@)" ] ; then \
+		echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \
 	fi
 	@$(MKCONFIG) -a ads5121 ppc mpc512x ads5121
 
diff --git a/board/ads5121/README b/board/ads5121/README
new file mode 100644
index 000000000..f2d1df3c9
--- /dev/null
+++ b/board/ads5121/README
@@ -0,0 +1,9 @@
+To configure for the current (Rev 3.x) ADS5121
+	make ads5121_config
+This will automatically include PCI, the Real Time CLock, add backup flash
+ability and set the correct frequency and memory configuration.
+
+To configure for the older Rev 2 ADS5121 type (this will not have PCI)
+	make ads5121_rev2_config
+
+
diff --git a/board/ads5121/ads5121.c b/board/ads5121/ads5121.c
index 130b81d8d..de59991d2 100644
--- a/board/ads5121/ads5121.c
+++ b/board/ads5121/ads5121.c
@@ -26,7 +26,9 @@
 #include <asm/bitops.h>
 #include <command.h>
 #include <fdt_support.h>
-
+#ifdef CONFIG_MISC_INIT_R
+#include <i2c.h>
+#endif
 /* Clocks in use */
 #define SCCR1_CLOCKS_EN	(CLOCK_SCCR1_CFG_EN |				\
 			 CLOCK_SCCR1_LPC_EN |				\
@@ -75,8 +77,21 @@ int board_early_init_f (void)
 	 * Without this the flash identification routine fails, as it needs to issue
 	 * write commands in order to establish the device ID.
 	 */
-	*((volatile u8 *)(CFG_CPLD_BASE + 0x08)) = 0xC1;
 
+#ifdef CONFIG_ADS5121_REV2
+	*((volatile u8 *)(CFG_CPLD_BASE + 0x08)) = 0xC1;
+#else
+	if (*((u8 *)(CFG_CPLD_BASE + 0x08)) & 0x04) {
+		*((volatile u8 *)(CFG_CPLD_BASE + 0x08)) = 0xC1;
+	} else {
+		/* running from Backup flash */
+		*((volatile u8 *)(CFG_CPLD_BASE + 0x08)) = 0x32;
+	}
+#endif
+	/*
+	 * Configure Flash Speed
+	 */
+	*((volatile u32 *)(CFG_IMMR + LPC_OFFSET + CS0_CONFIG)) = CFG_CS0_CFG;
 	/*
 	 * Enable clocks
 	 */
diff --git a/cpu/mpc512x/cpu.c b/cpu/mpc512x/cpu.c
index bed77acaa..b59f36d5f 100644
--- a/cpu/mpc512x/cpu.c
+++ b/cpu/mpc512x/cpu.c
@@ -133,8 +133,9 @@ void watchdog_reset (void)
 #ifdef CONFIG_OF_LIBFDT
 void ft_cpu_setup(void *blob, bd_t *bd)
 {
-	char * cpu_path = "/cpus/" OF_CPU;
-	char * eth_path = "/" OF_SOC "/ethernet@2800";
+	char *cpu_path = "/cpus/" OF_CPU;
+	char *eth_path = "/" OF_SOC "/ethernet@2800";
+	char *eth_path_old = "/" OF_SOC_OLD "/ethernet@2800";
 
 	do_fixup_by_path_u32(blob, cpu_path, "timebase-frequency", OF_TBCLK, 1);
 	do_fixup_by_path_u32(blob, cpu_path, "bus-frequency", bd->bi_busfreq, 1);
@@ -144,5 +145,8 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 
 	/* this is so old kernels with old device trees will boot */
 	do_fixup_by_path_u32(blob, "/" OF_SOC_OLD, "bus-frequency", bd->bi_ipsfreq, 0);
+	do_fixup_by_path(blob, eth_path_old, "local-mac-address",
+			bd->bi_enetaddr, 6, 0);
+	do_fixup_by_path(blob, eth_path_old, "address", bd->bi_enetaddr, 6, 0);
 }
 #endif
diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h
index 22277d958..f104e68f1 100644
--- a/include/configs/ads5121.h
+++ b/include/configs/ads5121.h
@@ -58,7 +58,12 @@
 
 /* CONFIG_PCI is defined at config time */
 
+#ifdef CONFIG_ADS5121_REV2
 #define CFG_MPC512X_CLKIN	66000000	/* in Hz */
+#else
+#define CFG_MPC512X_CLKIN	33333333	/* in Hz */
+#define CONFIG_PCI
+#endif
 
 #define CONFIG_BOARD_EARLY_INIT_F		/* call board_early_init_f() */
 #define CONFIG_MISC_INIT_R
@@ -72,7 +77,11 @@
 /*
  * DDR Setup - manually set all parameters as there's no SPD etc.
  */
+#ifdef CONFIG_ADS5121_REV2
 #define CFG_DDR_SIZE		256		/* MB */
+#else
+#define CFG_DDR_SIZE		512		/* MB */
+#endif
 #define CFG_DDR_BASE		0x00000000	/* DDR is system memory*/
 #define CFG_SDRAM_BASE		CFG_DDR_BASE
 
@@ -120,14 +129,20 @@
  *	[09:05]	DRAM tRP:
  *	[04:00] DRAM tRPA
  */
-
+#ifdef CONFIG_ADS5121_REV2
 #define CFG_MDDRC_SYS_CFG	0xF8604A00
 #define CFG_MDDRC_SYS_CFG_RUN	0xE8604A00
+#define CFG_MDDRC_TIME_CFG1	0x54EC1168
+#define CFG_MDDRC_TIME_CFG2	0x35210864
+#else
+#define CFG_MDDRC_SYS_CFG	 0xFA804A00
+#define CFG_MDDRC_SYS_CFG_RUN	 0xEA804A00
+#define CFG_MDDRC_TIME_CFG1	 0x68EC1168
+#define CFG_MDDRC_TIME_CFG2	 0x34310864
+#endif
 #define CFG_MDDRC_SYS_CFG_EN	0xF0000000
 #define CFG_MDDRC_TIME_CFG0	0x00003D2E
 #define CFG_MDDRC_TIME_CFG0_RUN	0x06183D2E
-#define CFG_MDDRC_TIME_CFG1	0x54EC1168
-#define CFG_MDDRC_TIME_CFG2	0x35210864
 
 #define CFG_MICRON_NOP		0x01380000
 #define CFG_MICRON_PCHG_ALL	0x01100400
@@ -166,12 +181,17 @@
 /*
  * NOR FLASH on the Local Bus
  */
+#undef CONFIG_BKUP_FLASH
 #define CFG_FLASH_CFI				/* use the Common Flash Interface */
 #define CFG_FLASH_CFI_DRIVER			/* use the CFI driver */
+#ifdef CONFIG_BKUP_FLASH
+#define CFG_FLASH_BASE		0xFF800000	/* start of FLASH   */
+#define CFG_FLASH_SIZE		0x00800000	/* max flash size in bytes */
+#else
 #define CFG_FLASH_BASE		0xFC000000	/* start of FLASH   */
 #define CFG_FLASH_SIZE		0x04000000	/* max flash size in bytes */
+#endif
 #define CFG_FLASH_USE_BUFFER_WRITE
-
 #define CFG_MAX_FLASH_BANKS	1		/* number of banks */
 #define CFG_FLASH_BANKS_LIST	{CFG_FLASH_BASE}
 #define CFG_MAX_FLASH_SECT	256		/* max sectors per device */
@@ -287,14 +307,13 @@
 #define CONFIG_NET_MULTI
 #define CONFIG_PHY_ADDR		0x1
 #define CONFIG_MII		1	/* MII PHY management		*/
+#define CONFIG_FEC_AN_TIMEOUT	1
 
-#if 0
 /*
  * Configure on-board RTC
  */
-#define CONFIG_RTC_DS1374			/* use ds1374 rtc via i2c	*/
+#define CONFIG_RTC_M41T62			/* use M41T62 rtc via i2 */
 #define CFG_I2C_RTC_ADDR		0x68	/* at address 0x68		*/
-#endif
 
 /*
  * Environment
@@ -303,7 +322,11 @@
 /* This has to be a multiple of the Flash sector size */
 #define CFG_ENV_ADDR		(CFG_MONITOR_BASE + CFG_MONITOR_LEN)
 #define CFG_ENV_SIZE		0x2000
+#ifdef CONFIG_BKUP_FLASH
+#define CFG_ENV_SECT_SIZE	0x20000	/* one sector (256K) for env */
+#else
 #define CFG_ENV_SECT_SIZE	0x40000	/* one sector (256K) for env */
+#endif
 
 /* Address and size of Redundant Environment Sector	*/
 #define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
@@ -322,6 +345,7 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_DATE
 
 #if defined(CONFIG_PCI)
 #define CONFIG_CMD_PCI