Merge with /home/wd/git/u-boot/custodian/u-boot-mpc85xx

40 files changed, 2034 insertions, 710 deletions

diff --git a/Makefile b/Makefile
index f51688961..95e9e369a 100644
--- a/Makefile
+++ b/Makefile
@@ -212,6 +212,9 @@ LIBS += drivers/nand_legacy/libnand_legacy.a
 ifeq ($(CPU),mpc83xx)
 LIBS += drivers/qe/qe.a
 endif
+ifeq ($(CPU),mpc85xx)
+LIBS += drivers/qe/qe.a
+endif
 LIBS += drivers/sk98lin/libsk98lin.a
 LIBS += post/libpost.a post/drivers/libpostdrivers.a
 LIBS += $(shell if [ -d post/lib_$(ARCH) ]; then echo \
@@ -1783,17 +1786,38 @@ MPC8540EVAL_66_slave_config:      unconfig
 MPC8560ADS_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads
 
+MPC8541CDS_legacy_config \
 MPC8541CDS_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8541cds cds
+	@mkdir -p $(obj)include
+	@echo "" >$(obj)include/config.h ; \
+	if [ "$(findstring _legacy_,$@)" ] ; then \
+		echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
+		echo "... legacy" ; \
+	fi
+	@$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds cds
 
 MPC8544DS_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale
 
+MPC8548CDS_legacy_config \
 MPC8548CDS_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8548cds cds
+	@mkdir -p $(obj)include
+	@echo "" >$(obj)include/config.h ; \
+	if [ "$(findstring _legacy_,$@)" ] ; then \
+		echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
+		echo "... legacy" ; \
+	fi
+	@$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds cds
 
+MPC8555CDS_legacy_config \
 MPC8555CDS_config:	unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8555cds cds
+	@mkdir -p $(obj)include
+	@echo "" >$(obj)include/config.h ; \
+	if [ "$(findstring _legacy_,$@)" ] ; then \
+		echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
+		echo "... legacy" ; \
+	fi
+	@$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds cds
 
 MPC8568MDS_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds
diff --git a/board/cds/common/via.c b/board/cds/common/via.c
index e79bd02a1..4a63d7794 100644
--- a/board/cds/common/via.c
+++ b/board/cds/common/via.c
@@ -28,11 +28,16 @@ void mpc85xx_config_via(struct pci_controller *hose,
 			pci_dev_t dev, struct pci_config_table *tab)
 {
 	pci_dev_t bridge;
+	unsigned int cmdstat;
 
 	/* Enable USB and IDE functions */
 	pci_hose_write_config_byte(hose, dev, 0x48, 0x08);
 
-	pciauto_config_device(hose, dev);
+	pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat);
+	cmdstat |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY| PCI_COMMAND_MASTER;
+	pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat);
+	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
+	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
 
 	/*
 	 * Force the backplane P2P bridge to have a window
@@ -40,7 +45,7 @@ void mpc85xx_config_via(struct pci_controller *hose,
 	 * This allows legacy I/O (i8259, etc) on the VIA
 	 * southbridge to be accessed.
 	 */
-	bridge = PCI_BDF(0,17,0);
+	bridge = PCI_BDF(0,BRIDGE_ID,0);
 	pci_hose_write_config_byte(hose, bridge, PCI_IO_BASE, 0);
 	pci_hose_write_config_word(hose, bridge, PCI_IO_BASE_UPPER16, 0);
 	pci_hose_write_config_byte(hose, bridge, PCI_IO_LIMIT, 0x10);
diff --git a/board/cds/mpc8541cds/mpc8541cds.c b/board/cds/mpc8541cds/mpc8541cds.c
index 419232483..558ba9903 100644
--- a/board/cds/mpc8541cds/mpc8541cds.c
+++ b/board/cds/mpc8541cds/mpc8541cds.c
@@ -476,14 +476,17 @@ void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_ta
 
 static struct pci_config_table pci_mpc85xxcds_config_table[] = {
 	{0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
-	{0x1106, 0x0686, PCI_ANY_ID, 1, 2, 0, mpc85xx_config_via, {0,0,0}},
-	{0x1106, 0x0571, PCI_ANY_ID, 1, 2, 1,
+	{0x1106, 0x0686, PCI_ANY_ID, 1, VIA_ID, 0, mpc85xx_config_via, {0,0,0}},
+	{0x1106, 0x0571, PCI_ANY_ID, 1, VIA_ID, 1,
 		mpc85xx_config_via_usbide, {0,0,0}},
-	{0x1105, 0x3038, PCI_ANY_ID, 1, 2, 2, mpc85xx_config_via_usb, {0,0,0}},
-	{0x1106, 0x3038, PCI_ANY_ID, 1, 2, 3, mpc85xx_config_via_usb2, {0,0,0}},
-	{0x1106, 0x3058, PCI_ANY_ID, 1, 2, 5,
+	{0x1105, 0x3038, PCI_ANY_ID, 1, VIA_ID, 2,
+		mpc85xx_config_via_usb, {0,0,0}},
+	{0x1106, 0x3038, PCI_ANY_ID, 1, VIA_ID, 3,
+		mpc85xx_config_via_usb2, {0,0,0}},
+	{0x1106, 0x3058, PCI_ANY_ID, 1, VIA_ID, 5,
 		mpc85xx_config_via_power, {0,0,0}},
-	{0x1106, 0x3068, PCI_ANY_ID, 1, 2, 6, mpc85xx_config_via_ac97, {0,0,0}},
+	{0x1106, 0x3068, PCI_ANY_ID, 1, VIA_ID, 6,
+		mpc85xx_config_via_ac97, {0,0,0}},
 	{},
 };
 
diff --git a/board/cds/mpc8548cds/config.mk b/board/cds/mpc8548cds/config.mk
index 242a67620..b23bc8737 100644
--- a/board/cds/mpc8548cds/config.mk
+++ b/board/cds/mpc8548cds/config.mk
@@ -1,5 +1,5 @@
 #
-# Copyright 2004 Freescale Semiconductor.
+# Copyright 2004, 2007 Freescale Semiconductor.
 #
 # See file CREDITS for list of people who contributed to this
 # project.
@@ -23,7 +23,9 @@
 #
 # mpc8548cds board
 #
+ifndef TEXT_BASE
 TEXT_BASE = 0xfff80000
+endif
 
 PLATFORM_CPPFLAGS += -DCONFIG_E500=1
 PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
diff --git a/board/cds/mpc8548cds/init.S b/board/cds/mpc8548cds/init.S
index d468f5b61..72940b035 100644
--- a/board/cds/mpc8548cds/init.S
+++ b/board/cds/mpc8548cds/init.S
@@ -1,5 +1,5 @@
 /*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2004, 2007 Freescale Semiconductor.
  * Copyright 2002,2003, Motorola Inc.
  *
  * See file CREDITS for list of people who contributed to this
@@ -28,6 +28,12 @@
 #include <config.h>
 #include <mpc85xx.h>
 
+#define LAWAR_TRGT_PCI1		0x00000000
+#define LAWAR_TRGT_PCI2		0x00100000
+#define LAWAR_TRGT_PCIE		0x00200000
+#define LAWAR_TRGT_RIO		0x00c00000
+#define LAWAR_TRGT_LBC		0x00400000
+#define LAWAR_TRGT_DDR		0x00f00000
 
 /*
  * TLB0 and TLB1 Entries
@@ -47,8 +53,8 @@
  */
 
 #define	entry_start \
-	mflr	r1 	;	\
-	bl	0f 	;
+	mflr	r1	;	\
+	bl	0f	;
 
 #define	entry_end \
 0:	mflr	r0	;	\
@@ -84,8 +90,8 @@ tlb1_entry:
 #endif
 
 	/*
-	 * TLB0		16K	Cacheable, non-guarded
-	 * 0xd001_0000	16K	Temporary Global data for initialization
+	 * TLB0		16K	Cacheable, guarded
+	 * Temporary Global data for initialization
 	 *
 	 * Use four 4K TLB0 entries.  These entries must be cacheable
 	 * as they provide the bootstrap memory before the memory
@@ -97,28 +103,28 @@ tlb1_entry:
 	.long TLB1_MAS0(0, 0, 0)
 	.long TLB1_MAS1(1, 0, 0, 0, 0)
 	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR),
-			0,0,0,0,0,0,0,0)
+			0,0,0,0,0,0,1,0)
 	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR),
 			0,0,0,0,0,1,0,1,0,1)
 
 	.long TLB1_MAS0(0, 0, 0)
 	.long TLB1_MAS1(1, 0, 0, 0, 0)
 	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 4 * 1024),
-			0,0,0,0,0,0,0,0)
+			0,0,0,0,0,0,1,0)
 	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 4 * 1024),
 			0,0,0,0,0,1,0,1,0,1)
 
 	.long TLB1_MAS0(0, 0, 0)
 	.long TLB1_MAS1(1, 0, 0, 0, 0)
 	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 8 * 1024),
-			0,0,0,0,0,0,0,0)
+			0,0,0,0,0,0,1,0)
 	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 8 * 1024),
 			0,0,0,0,0,1,0,1,0,1)
 
 	.long TLB1_MAS0(0, 0, 0)
 	.long TLB1_MAS1(1, 0, 0, 0, 0)
 	.long TLB1_MAS2(E500_TLB_EPN(CFG_INIT_RAM_ADDR + 12 * 1024),
-			0,0,0,0,0,0,0,0)
+			0,0,0,0,0,0,1,0)
 	.long TLB1_MAS3(E500_TLB_RPN(CFG_INIT_RAM_ADDR + 12 * 1024),
 			0,0,0,0,0,1,0,1,0,1)
 
@@ -130,51 +136,44 @@ tlb1_entry:
 	 */
 	.long TLB1_MAS0(1, 0, 0)
 	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_16M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_FLASH_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE), 0,0,0,0,0,1,0,1,0,1)
+	.long TLB1_MAS2(E500_TLB_EPN(CFG_BOOT_BLOCK), 0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(E500_TLB_RPN(CFG_BOOT_BLOCK), 0,0,0,0,0,1,0,1,0,1)
 
 	/*
-	 * TLB 1:	256M	Non-cacheable, guarded
-	 * 0x80000000	256M	PCI1 MEM
+	 * TLB 1:	1G	Non-cacheable, guarded
+	 * 0x80000000	1G	PCI1/PCIE  8,9,a,b
 	 */
 	.long TLB1_MAS0(1, 1, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
+	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1G)
+	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI_PHYS), 0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI_PHYS), 0,0,0,0,0,1,0,1,0,1)
 
+#ifdef CFG_RIO_MEM_PHYS
 	/*
 	 * TLB 2:	256M	Non-cacheable, guarded
-	 * 0x90000000	256M	PCI2 MEM
 	 */
 	.long TLB1_MAS0(1, 2, 0)
 	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI2_MEM_BASE),
+	.long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_PHYS),
 			0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI2_MEM_BASE),
-			0,0,0,0,0,1,0,1,0,1)
+	.long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_PHYS),	0,0,0,0,0,1,0,1,0,1)
 
 	/*
-	 * TLB 3:	1GB	Non-cacheable, guarded
-	 * 0xa0000000	256M	PEX MEM First half
-	 * 0xb0000000	256M	PEX MEM Second half
-	 * 0xc0000000	256M	Rapid IO MEM First half
-	 * 0xd0000000	256M	Rapid IO MEM Second half
+	 * TLB 3:	256M	Non-cacheable, guarded
 	 */
 	.long TLB1_MAS0(1, 3, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1G)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PEX_MEM_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PEX_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLB 4:	Reserved for future usage
-	 */
-
+	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+	.long TLB1_MAS2(E500_TLB_EPN(CFG_RIO_MEM_PHYS + 0x10000000),
+			0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(E500_TLB_RPN(CFG_RIO_MEM_PHYS + 0x10000000),
+			0,0,0,0,0,1,0,1,0,1)
+#endif
 	/*
 	 * TLB 5:	64M	Non-cacheable, guarded
 	 * 0xe000_0000	1M	CCSRBAR
-	 * 0xe200_0000	8M	PCI1 IO
-	 * 0xe280_0000	8M	PCI2 IO
-	 * 0xe300_0000	16M	PEX IO
+	 * 0xe200_0000	1M	PCI1 IO
+	 * 0xe210_0000	1M	PCI2 IO
+	 * 0xe300_0000	1M	PCIe IO
 	 */
 	.long TLB1_MAS0(1, 5, 0)
 	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
@@ -187,17 +186,18 @@ tlb1_entry:
 	 */
 	.long TLB1_MAS0(1, 6, 0)
 	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,0,0,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
+	.long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_CACHE_BASE), 0,0,0,0,0,0,0,0)
+	.long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_CACHE_BASE), 0,0,0,0,0,1,0,1,0,1)
 
 	/*
-	 * TLB 7:	1M	Non-cacheable, guarded
-	 * 0xf8000000	1M	CADMUS registers
+	 * TLB 7:	64M	Non-cacheable, guarded
+	 * 0xf8000000	64M	CADMUS registers, relocated L2SRAM
 	 */
 	.long TLB1_MAS0(1, 7, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)
-	.long TLB1_MAS2(E500_TLB_EPN(CADMUS_BASE_ADDR), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CADMUS_BASE_ADDR), 0,0,0,0,0,1,0,1,0,1)
+	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
+	.long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_NONCACHE_BASE), 0,0,0,0,1,0,1,0)
+	.long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_NONCACHE_BASE), 0,0,0,0,0,1,0,1,0,1)
+
 2:
 	entry_end
 
@@ -205,14 +205,13 @@ tlb1_entry:
  * LAW(Local Access Window) configuration:
  *
  * 0x0000_0000     0x7fff_ffff     DDR                     2G
- * 0x8000_0000     0x8fff_ffff     PCI1 MEM                256M
- * 0x9000_0000     0x9fff_ffff     PCI2 MEM                256M
- * 0xa000_0000     0xbfff_ffff     PEX MEM                 512M
+ * 0x8000_0000     0x9fff_ffff     PCI1 MEM                512M
+ * 0xa000_0000     0xbfff_ffff     PCIe MEM                512M
  * 0xc000_0000     0xdfff_ffff     RapidIO                 512M
  * 0xe000_0000     0xe000_ffff     CCSR                    1M
- * 0xe200_0000     0xe27f_ffff     PCI1 IO                 8M
- * 0xe280_0000     0xe2ff_ffff     PCI2 IO                 8M
- * 0xe300_0000     0xe3ff_ffff     PEX IO                  16M
+ * 0xe200_0000     0xe10f_ffff     PCI1 IO                 1M
+ * 0xe280_0000     0xe20f_ffff     PCI2 IO                 1M
+ * 0xe300_0000     0xe30f_ffff     PCIe IO                 1M
  * 0xf000_0000     0xf3ff_ffff     SDRAM                   64M
  * 0xf800_0000     0xf80f_ffff     NVRAM/CADMUS (*)        1M
  * 0xff00_0000     0xff7f_ffff     FLASH (2nd bank)        8M
@@ -222,47 +221,50 @@ tlb1_entry:
  *    CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
  *    If flash is 8M at default position (last 8M), no LAW needed.
  *
- * The defines below are 1-off of the actual LAWAR0 usage.
- * So LAWAR3 define uses the LAWAR4 register in the ECM.
+ * LAW 0 is reserved for boot mapping
  */
 
-#define LAWBAR0 0
-#define LAWAR0  ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
-
-#define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
-#define LAWAR1 	(LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_256M))
+	.section .bootpg, "ax"
+	.globl	law_entry
+law_entry:
+	entry_start
 
-#define LAWBAR2 ((CFG_PCI2_MEM_BASE>>12) & 0xfffff)
-#define LAWAR2 	(LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_256M))
+	.long (4f-3f)/8
+3:
+	.long  0
+	.long  (LAWAR_TRGT_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN
 
-#define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff)
-#define LAWAR3 	(LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_8M))
+#ifdef CFG_PCI1_MEM_PHYS
+	.long	(CFG_PCI1_MEM_PHYS>>12) & 0xfffff
+	.long	LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)
 
-#define LAWBAR4 ((CFG_PCI2_IO_PHYS>>12) & 0xfffff)
-#define LAWAR4 	(LAWAR_EN | LAWAR_TRGT_IF_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_8M))
+	.long	(CFG_PCI1_IO_PHYS>>12) & 0xfffff
+	.long	LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_1M)
+#endif
 
-/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
-#define LAWBAR5 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
-#define LAWAR5 	(LAWAR_EN | LAWAR_TRGT_IF_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M))
+#ifdef CFG_PCI2_MEM_PHYS
+	.long	(CFG_PCI2_MEM_PHYS>>12) & 0xfffff
+	.long	LAWAR_EN | LAWAR_TRGT_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_512M)
 
-#define LAWBAR6 ((CFG_PEX_MEM_BASE>>12) & 0xfffff)
-#define LAWAR6 	(LAWAR_EN | LAWAR_TRGT_IF_PEX | (LAWAR_SIZE & LAWAR_SIZE_512M))
+	.long	(CFG_PCI2_IO_PHYS>>12) & 0xfffff
+	.long	LAWAR_EN | LAWAR_TRGT_PCI2 | (LAWAR_SIZE & LAWAR_SIZE_1M)
+#endif
 
-#define LAWBAR7 ((CFG_PEX_IO_PHYS>>12) & 0xfffff)
-#define LAWAR7 	(LAWAR_EN | LAWAR_TRGT_IF_PEX | (LAWAR_SIZE & LAWAR_SIZE_16M))
+#ifdef CFG_PCIE1_MEM_PHYS
+	.long	(CFG_PCIE1_MEM_PHYS>>12) & 0xfffff
+	.long	LAWAR_EN | LAWAR_TRGT_PCIE | (LAWAR_SIZE & LAWAR_SIZE_512M)
 
-#define LAWBAR8 ((CFG_RIO_MEM_BASE>>12) & 0xfffff)
-#define LAWAR8  (LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))
+	.long	(CFG_PCIE1_IO_PHYS>>12) & 0xfffff
+	.long	LAWAR_EN | LAWAR_TRGT_PCIE | (LAWAR_SIZE & LAWAR_SIZE_1M)
+#endif
 
-	.section .bootpg, "ax"
-	.globl	law_entry
+	/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
+	.long	(CFG_LBC_CACHE_BASE>>12) & 0xfffff
+	.long	LAWAR_EN | LAWAR_TRGT_LBC | (LAWAR_SIZE & LAWAR_SIZE_256M)
 
-law_entry:
-	entry_start
-	.long (4f-3f)/8
-3:
-	.long LAWBAR0,LAWAR0,LAWBAR1,LAWAR1,LAWBAR2,LAWAR2,LAWBAR3,LAWAR3
-	.long LAWBAR4,LAWAR4,LAWBAR5,LAWAR5,LAWBAR6,LAWAR6,LAWBAR7,LAWAR7
-	.long LAWBAR8,LAWAR8
+#ifdef CFG_RIO_MEM_PHYS
+	.long	(CFG_RIO_MEM_PHYS>>12) & 0xfffff
+	.long	LAWAR_EN | LAWAR_TRGT_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M)
+#endif
 4:
 	entry_end
diff --git a/board/cds/mpc8548cds/mpc8548cds.c b/board/cds/mpc8548cds/mpc8548cds.c
index b7236417e..48753d7e2 100644
--- a/board/cds/mpc8548cds/mpc8548cds.c
+++ b/board/cds/mpc8548cds/mpc8548cds.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2004, 2007 Freescale Semiconductor.
  *
  * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
  *
@@ -26,6 +26,7 @@
 #include <pci.h>
 #include <asm/processor.h>
 #include <asm/immap_85xx.h>
+#include <asm/immap_fsl_pci.h>
 #include <spd.h>
 #include <miiphy.h>
 
@@ -33,10 +34,15 @@
 #include "../common/eeprom.h"
 #include "../common/via.h"
 
+#if defined(CONFIG_OF_FLAT_TREE)
+#include <ft_build.h>
+#endif
 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 extern void ddr_enable_ecc(unsigned int dram_size);
 #endif
 
+DECLARE_GLOBAL_DATA_PTR;
+
 extern long int spd_sdram(void);
 
 void local_bus_init(void);
@@ -56,13 +62,6 @@ int checkboard (void)
 	/* PCI slot in USER bits CSR[6:7] by convention. */
 	uint pci_slot = get_pci_slot ();
 
-	uint pci_dual = get_pci_dual ();	/* PCI DUAL in CM_PCI[3] */
-	uint pci1_32 = gur->pordevsr & 0x10000;	/* PORDEVSR[15] */
-	uint pci1_clk_sel = gur->porpllsr & 0x8000;	/* PORPLLSR[16] */
-	uint pci2_clk_sel = gur->porpllsr & 0x4000;	/* PORPLLSR[17] */
-
-	uint pci1_speed = get_clock_freq ();	/* PCI PSPEED in [4:5] */
-
 	uint cpu_board_rev = get_cpu_board_revision ();
 
 	printf ("Board: CDS Version 0x%02x, PCI Slot %d\n",
@@ -71,20 +70,6 @@ int checkboard (void)
 	printf ("CPU Board Revision %d.%d (0x%04x)\n",
 		MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev),
 		MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev);
-
-	printf ("    PCI1: %d bit, %s MHz, %s\n",
-		(pci1_32) ? 32 : 64,
-		(pci1_speed == 33000000) ? "33" :
-		(pci1_speed == 66000000) ? "66" : "unknown",
-		pci1_clk_sel ? "sync" : "async");
-
-	if (pci_dual) {
-		printf ("    PCI2: 32 bit, 66 MHz, %s\n",
-			pci2_clk_sel ? "sync" : "async");
-	} else {
-		printf ("    PCI2: disabled\n");
-	}
-
 	/*
 	 * Initialize local bus.
 	 */
@@ -102,6 +87,8 @@ int checkboard (void)
 	 */
 	gur->tsec34ioovcr = 0xe7e0;	/*  1110 0111 1110 0xxx */
 
+	ecm->eedr = 0xffffffff;		/* clear ecm errors */
+	ecm->eeer = 0xffffffff;		/* enable ecm errors */
 	return 0;
 }
 
@@ -176,6 +163,9 @@ local_bus_init(void)
 	lbc->lcrr |= 0x00030000;
 
 	asm("sync;isync;msync");
+
+	lbc->ltesr = 0xffffffff;	/* Clear LBC error interrupts */
+	lbc->lteir = 0xffffffff;	/* Enable LBC error interrupts */
 }
 
 /*
@@ -301,7 +291,7 @@ testdram(void)
 }
 #endif
 
-#if defined(CONFIG_PCI)
+#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
 /* For some reason the Tundra PCI bridge shows up on itself as a
  * different device.  Work around that by refusing to configure it.
  */
@@ -309,32 +299,189 @@ void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_ta
 
 static struct pci_config_table pci_mpc85xxcds_config_table[] = {
 	{0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
-	{0x1106, 0x0686, PCI_ANY_ID, 1, 2, 0, mpc85xx_config_via, {0,0,0}},
-	{0x1106, 0x0571, PCI_ANY_ID, 1, 2, 1,
+	{0x1106, 0x0686, PCI_ANY_ID, 1, VIA_ID, 0, mpc85xx_config_via, {0,0,0}},
+	{0x1106, 0x0571, PCI_ANY_ID, 1, VIA_ID, 1,
 		mpc85xx_config_via_usbide, {0,0,0}},
-	{0x1105, 0x3038, PCI_ANY_ID, 1, 2, 2, mpc85xx_config_via_usb, {0,0,0}},
-	{0x1106, 0x3038, PCI_ANY_ID, 1, 2, 3, mpc85xx_config_via_usb2, {0,0,0}},
-	{0x1106, 0x3058, PCI_ANY_ID, 1, 2, 5,
+	{0x1105, 0x3038, PCI_ANY_ID, 1, VIA_ID, 2,
+		mpc85xx_config_via_usb, {0,0,0}},
+	{0x1106, 0x3038, PCI_ANY_ID, 1, VIA_ID, 3,
+		mpc85xx_config_via_usb2, {0,0,0}},
+	{0x1106, 0x3058, PCI_ANY_ID, 1, VIA_ID, 5,
 		mpc85xx_config_via_power, {0,0,0}},
-	{0x1106, 0x3068, PCI_ANY_ID, 1, 2, 6, mpc85xx_config_via_ac97, {0,0,0}},
+	{0x1106, 0x3068, PCI_ANY_ID, 1, VIA_ID, 6,
+		mpc85xx_config_via_ac97, {0,0,0}},
 	{},
 };
 
-static struct pci_controller hose[] = {
-	{ config_table: pci_mpc85xxcds_config_table,},
-#ifdef CONFIG_MPC85XX_PCI2
-	{},
-#endif
-};
-
+static struct pci_controller pci1_hose = {
+	config_table: pci_mpc85xxcds_config_table};
 #endif	/* CONFIG_PCI */
 
+#ifdef CONFIG_PCI2
+static struct pci_controller pci2_hose;
+#endif	/* CONFIG_PCI2 */
+
+#ifdef CONFIG_PCIE1
+static struct pci_controller pcie1_hose;
+#endif	/* CONFIG_PCIE1 */
+
+int first_free_busno=0;
+
 void
 pci_init_board(void)
 {
-#ifdef CONFIG_PCI
-	pci_mpc85xx_init(&hose);
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile ccsr_gur_t *gur = &immap->im_gur;
+	uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
+	uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
+
+
+#ifdef CONFIG_PCI1
+{
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
+	extern void fsl_pci_init(struct pci_controller *hose);
+	struct pci_controller *hose = &pci1_hose;
+	struct pci_config_table *table;
+
+	uint pci_32 = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32;	/* PORDEVSR[15] */
+	uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;	/* PORDEVSR[14] */
+	uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;	/* PORPLLSR[16] */
+
+	uint pci_agent = (host_agent == 3) || (host_agent == 4 ) || (host_agent == 6);
+
+	uint pci_speed = get_clock_freq ();	/* PCI PSPEED in [4:5] */
+
+	if (!(gur->devdisr & MPC85xx_DEVDISR_PCI1)) {
+		printf ("    PCI: %d bit, %s MHz, %s, %s, %s\n",
+			(pci_32) ? 32 : 64,
+			(pci_speed == 33333000) ? "33" :
+			(pci_speed == 66666000) ? "66" : "unknown",
+			pci_clk_sel ? "sync" : "async",
+			pci_agent ? "agent" : "host",
+			pci_arb ? "arbiter" : "external-arbiter"
+			);
+
+
+		/* outbound memory */
+		pci_set_region(hose->regions + 0,
+			       CFG_PCI1_MEM_BASE,
+			       CFG_PCI1_MEM_PHYS,
+			       CFG_PCI1_MEM_SIZE,
+			       PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region(hose->regions + 1,
+			       CFG_PCI1_IO_BASE,
+			       CFG_PCI1_IO_PHYS,
+			       CFG_PCI1_IO_SIZE,
+			       PCI_REGION_IO);
+		hose->region_count = 2;
+
+		/* relocate config table pointers */
+		hose->config_table = \
+			(struct pci_config_table *)((uint)hose->config_table + gd->reloc_off);
+		for (table = hose->config_table; table && table->vendor; table++)
+			table->config_device += gd->reloc_off;
+
+		hose->first_busno=first_free_busno;
+		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+		fsl_pci_init(hose);
+		first_free_busno=hose->last_busno+1;
+		printf ("PCI on bus %02x - %02x\n",hose->first_busno,hose->last_busno);
+#ifdef CONFIG_PCIX_CHECK
+		if (!(gur->pordevsr & PORDEVSR_PCI)) {
+			/* PCI-X init */
+			if (CONFIG_SYS_CLK_FREQ < 66000000)
+				printf("PCI-X will only work at 66 MHz\n");
+
+			reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
+				| PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
+			pci_hose_write_config_word(hose, bus, PCIX_COMMAND, reg16);
+		}
+#endif
+	} else {
+		printf ("    PCI: disabled\n");
+	}
+}
+#else
+	gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
+#endif
+
+#ifdef CONFIG_PCI2
+{
+	uint pci2_clk_sel = gur->porpllsr & 0x4000;	/* PORPLLSR[17] */
+	uint pci_dual = get_pci_dual ();	/* PCI DUAL in CM_PCI[3] */
+	if (pci_dual) {
+		printf ("    PCI2: 32 bit, 66 MHz, %s\n",
+			pci2_clk_sel ? "sync" : "async");
+	} else {
+		printf ("    PCI2: disabled\n");
+	}
+}
+#else
+	gur->devdisr |= MPC85xx_DEVDISR_PCI2; /* disable */
+#endif /* CONFIG_PCI2 */
+
+#ifdef CONFIG_PCIE1
+{
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
+	extern void fsl_pci_init(struct pci_controller *hose);
+	struct pci_controller *hose = &pcie1_hose;
+	int pcie_ep =  (host_agent == 0) || (host_agent == 2 ) || (host_agent == 3);
+
+	int pcie_configured  = io_sel >= 1;
+
+	if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){
+		printf ("\n    PCIE connected to slot as %s (base address %x)",
+			pcie_ep ? "End Point" : "Root Complex",
+			(uint)pci);
+
+		if (pci->pme_msg_det) {
+			pci->pme_msg_det = 0xffffffff;
+			debug (" with errors.  Clearing.  Now 0x%08x",pci->pme_msg_det);
+		}
+		printf ("\n");
+
+		/* inbound */
+		pci_set_region(hose->regions + 0,
+			       CFG_PCI_MEMORY_BUS,
+			       CFG_PCI_MEMORY_PHYS,
+			       CFG_PCI_MEMORY_SIZE,
+			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+		/* outbound memory */
+		pci_set_region(hose->regions + 1,
+			       CFG_PCIE1_MEM_BASE,
+			       CFG_PCIE1_MEM_PHYS,
+			       CFG_PCIE1_MEM_SIZE,
+			       PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region(hose->regions + 2,
+			       CFG_PCIE1_IO_BASE,
+			       CFG_PCIE1_IO_PHYS,
+			       CFG_PCIE1_IO_SIZE,
+			       PCI_REGION_IO);
+
+		hose->region_count = 3;
+
+		hose->first_busno=first_free_busno;
+		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+		fsl_pci_init(hose);
+		printf ("PCIE on bus %d - %d\n",hose->first_busno,hose->last_busno);
+
+		first_free_busno=hose->last_busno+1;
+
+	} else {
+		printf ("    PCIE: disabled\n");
+	}
+ }
+#else
+	gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
 #endif
+
 }
 
 int last_stage_init(void)
@@ -367,3 +514,32 @@ int last_stage_init(void)
 
 	return 0;
 }
+
+
+#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
+void
+ft_pci_setup(void *blob, bd_t *bd)
+{
+	u32 *p;
+	int len;
+
+
+#ifdef CONFIG_PCI1
+	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8000/bus-range", &len);
+	if (p != NULL) {
+		p[0] = 0;
+		p[1] = pci1_hose.last_busno - pci1_hose.first_busno;
+		debug("PCI@8000 first_busno=%d last_busno=%d\n",p[0],p[1]);
+	}
+#endif
+
+#ifdef CONFIG_PCIE1
+	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@a000/bus-range", &len);
+	if (p != NULL) {
+		p[0] = 0;
+		p[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
+		debug("PCI@a000 first_busno=%d last_busno=%d\n",p[0],p[1]);
+	}
+#endif
+}
+#endif
diff --git a/board/cds/mpc8548cds/u-boot.lds b/board/cds/mpc8548cds/u-boot.lds
index c1f3495d7..530ba5a72 100644
--- a/board/cds/mpc8548cds/u-boot.lds
+++ b/board/cds/mpc8548cds/u-boot.lds
@@ -1,5 +1,5 @@
 /*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2004, 2007 Freescale Semiconductor.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -71,7 +71,6 @@ SECTIONS
     cpu/mpc85xx/cpu.o (.text)
     drivers/tsec.o (.text)
     cpu/mpc85xx/speed.o (.text)
-    cpu/mpc85xx/pci.o (.text)
     common/dlmalloc.o (.text)
     lib_generic/crc32.o (.text)
     lib_ppc/extable.o (.text)
diff --git a/board/cds/mpc8555cds/mpc8555cds.c b/board/cds/mpc8555cds/mpc8555cds.c
index 704bf0316..8f1642187 100644
--- a/board/cds/mpc8555cds/mpc8555cds.c
+++ b/board/cds/mpc8555cds/mpc8555cds.c
@@ -473,14 +473,17 @@ void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_ta
 
 static struct pci_config_table pci_mpc85xxcds_config_table[] = {
 	{0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
-	{0x1106, 0x0686, PCI_ANY_ID, 1, 2, 0, mpc85xx_config_via, {0,0,0}},
-	{0x1106, 0x0571, PCI_ANY_ID, 1, 2, 1,
+	{0x1106, 0x0686, PCI_ANY_ID, 1, VIA_ID, 0, mpc85xx_config_via, {0,0,0}},
+	{0x1106, 0x0571, PCI_ANY_ID, 1, VIA_ID, 1,
 		mpc85xx_config_via_usbide, {0,0,0}},
-	{0x1105, 0x3038, PCI_ANY_ID, 1, 2, 2, mpc85xx_config_via_usb, {0,0,0}},
-	{0x1106, 0x3038, PCI_ANY_ID, 1, 2, 3, mpc85xx_config_via_usb2, {0,0,0}},
-	{0x1106, 0x3058, PCI_ANY_ID, 1, 2, 5,
+	{0x1105, 0x3038, PCI_ANY_ID, 1, VIA_ID, 2,
+		mpc85xx_config_via_usb, {0,0,0}},
+	{0x1106, 0x3038, PCI_ANY_ID, 1, VIA_ID, 3,
+		mpc85xx_config_via_usb2, {0,0,0}},
+	{0x1106, 0x3058, PCI_ANY_ID, 1, VIA_ID, 5,
 		mpc85xx_config_via_power, {0,0,0}},
-	{0x1106, 0x3068, PCI_ANY_ID, 1, 2, 6, mpc85xx_config_via_ac97, {0,0,0}},
+	{0x1106, 0x3068, PCI_ANY_ID, 1, VIA_ID, 6,
+		mpc85xx_config_via_ac97, {0,0,0}},
 	{},
 };
 
diff --git a/board/freescale/mpc8544ds/init.S b/board/freescale/mpc8544ds/init.S
index 296fee5e6..ea7d54dc3 100644
--- a/board/freescale/mpc8544ds/init.S
+++ b/board/freescale/mpc8544ds/init.S
@@ -52,8 +52,8 @@
  */
 
 #define	entry_start \
-	mflr	r1 	;	\
-	bl	0f 	;
+	mflr	r1	;	\
+	bl	0f	;
 
 #define	entry_end \
 0:	mflr	r0	;	\
@@ -214,7 +214,7 @@ law_entry:
 	.long	0
 	.long	(LAWAR_TRGT_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN
 
-	.long	(CFG_PCI1_MEM_BASE>>12) & 0xfffff
+	.long	(CFG_PCI1_MEM_PHYS>>12) & 0xfffff
 	.long	LAWAR_EN | LAWAR_TRGT_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M)
 
 	.long	(CFG_PCI1_IO_PHYS>>12) & 0xfffff
diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c
index 4ff1da930..8ddbb0101 100644
--- a/board/freescale/mpc8544ds/mpc8544ds.c
+++ b/board/freescale/mpc8544ds/mpc8544ds.c
@@ -22,8 +22,10 @@
 
 #include <common.h>
 #include <command.h>
+#include <pci.h>
 #include <asm/processor.h>
 #include <asm/immap_85xx.h>
+#include <asm/immap_fsl_pci.h>
 #include <spd.h>
 #include <miiphy.h>
 
@@ -51,12 +53,19 @@ int checkboard (void)
 {
 	volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
 	volatile ccsr_gur_t *gur = &immap->im_gur;
+	volatile ccsr_lbc_t *lbc = &immap->im_lbc;
+	volatile ccsr_local_ecm_t *ecm = &immap->im_local_ecm;
 
 	if ((uint)&gur->porpllsr != 0xe00e0000) {
 		printf("immap size error %x\n",&gur->porpllsr);
 	}
 	printf ("Board: MPC8544DS\n");
 
+	lbc->ltesr = 0xffffffff;	/* Clear LBC error interrupts */
+	lbc->lteir = 0xffffffff;	/* Enable LBC error interrupts */
+	ecm->eedr = 0xffffffff;		/* Clear ecm errors */
+	ecm->eeer = 0xffffffff;		/* Enable ecm errors */
+
 	return 0;
 }
 
@@ -118,6 +127,316 @@ testdram(void)
 }
 #endif
 
+#ifdef CONFIG_PCI1
+static struct pci_controller pci1_hose;
+#endif
+
+#ifdef CONFIG_PCIE1
+static struct pci_controller pcie1_hose;
+#endif
+
+#ifdef CONFIG_PCIE2
+static struct pci_controller pcie2_hose;
+#endif
+
+#ifdef CONFIG_PCIE3
+static struct pci_controller pcie3_hose;
+#endif
+
+int first_free_busno=0;
+
+void
+pci_init_board(void)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile ccsr_gur_t *gur = &immap->im_gur;
+	uint devdisr = gur->devdisr;
+	uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
+	uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
+
+	debug ("   pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n",
+		devdisr, io_sel, host_agent);
+
+	if (io_sel & 1) {
+		if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS))
+			printf ("    eTSEC1 is in sgmii mode.\n");
+		if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
+			printf ("    eTSEC3 is in sgmii mode.\n");
+	}
+
+#ifdef CONFIG_PCIE3
+{
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE3_ADDR;
+	extern void fsl_pci_init(struct pci_controller *hose);
+	struct pci_controller *hose = &pcie3_hose;
+	int pcie_ep = (host_agent == 3);
+	int pcie_configured  = io_sel >= 1;
+
+	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
+		printf ("\n    PCIE3 connected to ULI as %s (base address %x)",
+			pcie_ep ? "End Point" : "Root Complex",
+			(uint)pci);
+		if (pci->pme_msg_det) {
+			pci->pme_msg_det = 0xffffffff;
+			debug (" with errors.  Clearing.  Now 0x%08x",pci->pme_msg_det);
+		}
+		printf ("\n");
+
+		/* inbound */
+		pci_set_region(hose->regions + 0,
+			       CFG_PCI_MEMORY_BUS,
+			       CFG_PCI_MEMORY_PHYS,
+			       CFG_PCI_MEMORY_SIZE,
+			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+		/* outbound memory */
+		pci_set_region(hose->regions + 1,
+			       CFG_PCIE3_MEM_BASE,
+			       CFG_PCIE3_MEM_PHYS,
+			       CFG_PCIE3_MEM_SIZE,
+			       PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region(hose->regions + 2,
+			       CFG_PCIE3_IO_BASE,
+			       CFG_PCIE3_IO_PHYS,
+			       CFG_PCIE3_IO_SIZE,
+			       PCI_REGION_IO);
+
+		hose->region_count = 3;
+#ifdef CFG_PCIE3_MEM_BASE2
+		/* outbound memory */
+		pci_set_region(hose->regions + 3,
+			       CFG_PCIE3_MEM_BASE2,
+			       CFG_PCIE3_MEM_PHYS2,
+			       CFG_PCIE3_MEM_SIZE2,
+			       PCI_REGION_MEM);
+		hose->region_count++;
+#endif
+		hose->first_busno=first_free_busno;
+		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+		fsl_pci_init(hose);
+
+		first_free_busno=hose->last_busno+1;
+		printf ("    PCIE3 on bus %02x - %02x\n",
+			hose->first_busno,hose->last_busno);
+
+	} else {
+		printf ("    PCIE3: disabled\n");
+	}
+
+ }
+#else
+	gur->devdisr |= MPC85xx_DEVDISR_PCIE3; /* disable */
+#endif
+
+#ifdef CONFIG_PCIE1
+ {
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
+	extern void fsl_pci_init(struct pci_controller *hose);
+	struct pci_controller *hose = &pcie1_hose;
+	int pcie_ep = (host_agent == 5);
+	int pcie_configured  = io_sel & 6;
+
+	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
+		printf ("\n    PCIE1 connected to Slot2 as %s (base address %x)",
+			pcie_ep ? "End Point" : "Root Complex",
+			(uint)pci);
+		if (pci->pme_msg_det) {
+			pci->pme_msg_det = 0xffffffff;
+			debug (" with errors.  Clearing.  Now 0x%08x",pci->pme_msg_det);
+		}
+		printf ("\n");
+
+		/* inbound */
+		pci_set_region(hose->regions + 0,
+			       CFG_PCI_MEMORY_BUS,
+			       CFG_PCI_MEMORY_PHYS,
+			       CFG_PCI_MEMORY_SIZE,
+			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+		/* outbound memory */
+		pci_set_region(hose->regions + 1,
+			       CFG_PCIE1_MEM_BASE,
+			       CFG_PCIE1_MEM_PHYS,
+			       CFG_PCIE1_MEM_SIZE,
+			       PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region(hose->regions + 2,
+			       CFG_PCIE1_IO_BASE,
+			       CFG_PCIE1_IO_PHYS,
+			       CFG_PCIE1_IO_SIZE,
+			       PCI_REGION_IO);
+
+		hose->region_count = 3;
+#ifdef CFG_PCIE1_MEM_BASE2
+		/* outbound memory */
+		pci_set_region(hose->regions + 3,
+			       CFG_PCIE1_MEM_BASE2,
+			       CFG_PCIE1_MEM_PHYS2,
+			       CFG_PCIE1_MEM_SIZE2,
+			       PCI_REGION_MEM);
+		hose->region_count++;
+#endif
+		hose->first_busno=first_free_busno;
+
+		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+		fsl_pci_init(hose);
+
+		first_free_busno=hose->last_busno+1;
+		printf("    PCIE1 on bus %02x - %02x\n",
+		       hose->first_busno,hose->last_busno);
+
+	} else {
+		printf ("    PCIE1: disabled\n");
+	}
+
+ }
+#else
+	gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
+#endif
+
+#ifdef CONFIG_PCIE2
+ {
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE2_ADDR;
+	extern void fsl_pci_init(struct pci_controller *hose);
+	struct pci_controller *hose = &pcie2_hose;
+	int pcie_ep = (host_agent == 3);
+	int pcie_configured  = io_sel & 4;
+
+	if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
+		printf ("\n    PCIE2 connected to Slot 1 as %s (base address %x)",
+			pcie_ep ? "End Point" : "Root Complex",
+			(uint)pci);
+		if (pci->pme_msg_det) {
+			pci->pme_msg_det = 0xffffffff;
+			debug (" with errors.  Clearing.  Now 0x%08x",pci->pme_msg_det);
+		}
+		printf ("\n");
+
+		/* inbound */
+		pci_set_region(hose->regions + 0,
+			       CFG_PCI_MEMORY_BUS,
+			       CFG_PCI_MEMORY_PHYS,
+			       CFG_PCI_MEMORY_SIZE,
+			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+		/* outbound memory */
+		pci_set_region(hose->regions + 1,
+			       CFG_PCIE2_MEM_BASE,
+			       CFG_PCIE2_MEM_PHYS,
+			       CFG_PCIE2_MEM_SIZE,
+			       PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region(hose->regions + 2,
+			       CFG_PCIE2_IO_BASE,
+			       CFG_PCIE2_IO_PHYS,
+			       CFG_PCIE2_IO_SIZE,
+			       PCI_REGION_IO);
+
+		hose->region_count = 3;
+#ifdef CFG_PCIE2_MEM_BASE2
+		/* outbound memory */
+		pci_set_region(hose->regions + 3,
+			       CFG_PCIE2_MEM_BASE2,
+			       CFG_PCIE2_MEM_PHYS2,
+			       CFG_PCIE2_MEM_SIZE2,
+			       PCI_REGION_MEM);
+		hose->region_count++;
+#endif
+		hose->first_busno=first_free_busno;
+		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+		fsl_pci_init(hose);
+		first_free_busno=hose->last_busno+1;
+		printf ("    PCIE2 on bus %02x - %02x\n",
+			hose->first_busno,hose->last_busno);
+
+	} else {
+		printf ("    PCIE2: disabled\n");
+	}
+
+ }
+#else
+	gur->devdisr |= MPC85xx_DEVDISR_PCIE2; /* disable */
+#endif
+
+
+#ifdef CONFIG_PCI1
+{
+	volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
+	extern void fsl_pci_init(struct pci_controller *hose);
+	struct pci_controller *hose = &pci1_hose;
+
+	uint pci_agent = (host_agent == 6);
+	uint pci_speed = 66666000; /*get_clock_freq (); PCI PSPEED in [4:5] */
+	uint pci_32 = 1;
+	uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;	/* PORDEVSR[14] */
+	uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;	/* PORPLLSR[16] */
+
+
+	if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
+		printf ("\n    PCI: %d bit, %s MHz, %s, %s, %s (base address %x)\n",
+			(pci_32) ? 32 : 64,
+			(pci_speed == 33333000) ? "33" :
+			(pci_speed == 66666000) ? "66" : "unknown",
+			pci_clk_sel ? "sync" : "async",
+			pci_agent ? "agent" : "host",
+			pci_arb ? "arbiter" : "external-arbiter",
+			(uint)pci
+			);
+
+		/* inbound */
+		pci_set_region(hose->regions + 0,
+			       CFG_PCI_MEMORY_BUS,
+			       CFG_PCI_MEMORY_PHYS,
+			       CFG_PCI_MEMORY_SIZE,
+			       PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+		/* outbound memory */
+		pci_set_region(hose->regions + 1,
+			       CFG_PCI1_MEM_BASE,
+			       CFG_PCI1_MEM_PHYS,
+			       CFG_PCI1_MEM_SIZE,
+			       PCI_REGION_MEM);
+
+		/* outbound io */
+		pci_set_region(hose->regions + 2,
+			       CFG_PCI1_IO_BASE,
+			       CFG_PCI1_IO_PHYS,
+			       CFG_PCI1_IO_SIZE,
+			       PCI_REGION_IO);
+		hose->region_count = 3;
+#ifdef CFG_PCIE3_MEM_BASE2
+		/* outbound memory */
+		pci_set_region(hose->regions + 3,
+			       CFG_PCIE3_MEM_BASE2,
+			       CFG_PCIE3_MEM_PHYS2,
+			       CFG_PCIE3_MEM_SIZE2,
+			       PCI_REGION_MEM);
+		hose->region_count++;
+#endif
+		hose->first_busno=first_free_busno;
+		pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+		fsl_pci_init(hose);
+		first_free_busno=hose->last_busno+1;
+		printf ("PCI on bus %02x - %02x\n",
+			hose->first_busno,hose->last_busno);
+	} else {
+		printf ("    PCI: disabled\n");
+	}
+}
+#else
+	gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
+#endif
+}
+
+
 int last_stage_init(void)
 {
 	return 0;
@@ -197,5 +516,36 @@ ft_board_setup(void *blob, bd_t *bd)
 		*p++ = cpu_to_be32(bd->bi_memstart);
 		*p = cpu_to_be32(bd->bi_memsize);
 	}
+#ifdef CONFIG_PCIE1
+	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@a000/bus-range", &len);
+	if (p != NULL) {
+		p[0] = 0;
+		p[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
+		debug("PCI@a000 first_busno=%d last_busno=%d\n",p[0],p[1]);
+	}
+#endif
+#ifdef CONFIG_PCIE2
+	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@9000/bus-range", &len);
+	if (p != NULL) {
+		p[0] = 0;
+		p[1] = pcie2_hose.last_busno - pcie2_hose.first_busno;
+		debug("PCI@9000 first_busno=%d last_busno=%d\n",p[0],p[1]);
+	}
+#endif
+#ifdef CONFIG_PCIE3
+	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@b000/bus-range", &len);
+	if (p != NULL) {
+		p[0] = 0;
+		p[1] = pcie3_hose.last_busno - pcie3_hose.first_busno;;
+		debug("PCI@b000 first_busno=%d last_busno=%d\n",p[0],p[1]);
+	}
+#endif
+	ft_cpu_setup(blob, bd);
+
+	p = ft_get_prop(blob, "/memory/reg", &len);
+	if (p != NULL) {
+		*p++ = cpu_to_be32(bd->bi_memstart);
+		*p = cpu_to_be32(bd->bi_memsize);
+	}
 }
 #endif
diff --git a/board/mpc8560ads/mpc8560ads.c b/board/mpc8560ads/mpc8560ads.c
index 41acb97af..eef524b45 100644
--- a/board/mpc8560ads/mpc8560ads.c
+++ b/board/mpc8560ads/mpc8560ads.c
@@ -554,7 +554,6 @@ ft_soc_setup(void *blob, bd_t *bd)
 {
 	u32 *p;
 	int len;
-	ulong data;
 
 	p = ft_get_prop(blob, "/" OF_SOC "/cpm@e0000000/brg-frequency", &len);
 
diff --git a/board/mpc8568mds/bcsr.c b/board/mpc8568mds/bcsr.c
index 2e2e8cd18..aae0f98e0 100644
--- a/board/mpc8568mds/bcsr.c
+++ b/board/mpc8568mds/bcsr.c
@@ -47,3 +47,10 @@ void disable_8568mds_flash_write()
 
 	bcsr[9] &= ~(0x01);
 }
+
+void enable_8568mds_qe_mdio()
+{
+	u8 *bcsr = (u8 *)(CFG_BCSR);
+
+	bcsr[7] |= 0x01;
+}
diff --git a/board/mpc8568mds/bcsr.h b/board/mpc8568mds/bcsr.h
index 8d4cb2f14..aefd9bf54 100644
--- a/board/mpc8568mds/bcsr.h
+++ b/board/mpc8568mds/bcsr.h
@@ -95,5 +95,6 @@
 void enable_8568mds_duart(void);
 void enable_8568mds_flash_write(void);
 void disable_8568mds_flash_write(void);
+void enable_8568mds_qe_mdio(void);
 
 #endif	/* __BCSR_H_ */
diff --git a/board/mpc8568mds/init.S b/board/mpc8568mds/init.S
index 0d879821e..972a7d429 100644
--- a/board/mpc8568mds/init.S
+++ b/board/mpc8568mds/init.S
@@ -143,54 +143,42 @@ tlb1_entry:
 	.long TLB1_MAS3(E500_TLB_RPN(CFG_FLASH_BASE), 0,0,0,0,0,1,0,1,0,1)
 
 	/*
-	 * TLBe 2:	256M	Non-cacheable, guarded
-	 * 0x80000000	256M	PCI1 MEM
+	 * TLBe 2:	1G	Non-cacheable, guarded
+	 * 0x80000000	512M	PCI1 MEM
+	 * 0xa0000000 	512M	PCIe MEM
 	 */
 	.long TLB1_MAS0(1, 2, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
+	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1G)
 	.long TLB1_MAS2(E500_TLB_EPN(CFG_PCI1_MEM_BASE), 0,0,0,0,1,0,1,0)
 	.long TLB1_MAS3(E500_TLB_RPN(CFG_PCI1_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
 
 	/*
-	 * TLBe 3:	256M	Non-cacheable, guarded
-	 * 0xa0000000	256M	PCIe Mem
-	 */
-	.long TLB1_MAS0(1, 3, 0)
-	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256M)
-	.long TLB1_MAS2(E500_TLB_EPN(CFG_PEX_MEM_BASE), 0,0,0,0,1,0,1,0)
-	.long TLB1_MAS3(E500_TLB_RPN(CFG_PEX_MEM_BASE), 0,0,0,0,0,1,0,1,0,1)
-
-	/*
-	 * TLBe 4:	Reserved for future usage
-	 */
-
-	/*
-	 * TLBe 5:	64M	Non-cacheable, guarded
+	 * TLBe 3:	64M	Non-cacheable, guarded
 	 * 0xe000_0000	1M	CCSRBAR
 	 * 0xe200_0000	8M	PCI1 IO
 	 * 0xe280_0000	8M	PCIe IO
 	 */
-	.long TLB1_MAS0(1, 5, 0)
+	.long TLB1_MAS0(1, 3, 0)
 	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
 	.long TLB1_MAS2(E500_TLB_EPN(CFG_CCSRBAR), 0,0,0,0,1,0,1,0)
 	.long TLB1_MAS3(E500_TLB_RPN(CFG_CCSRBAR), 0,0,0,0,0,1,0,1,0,1)
 
 	/*
-	 * TLBe 6:	64M	Cacheable, non-guarded
+	 * TLBe 4:	64M	Cacheable, non-guarded
 	 * 0xf000_0000	64M	LBC SDRAM
 	 */
-	.long TLB1_MAS0(1, 6, 0)
+	.long TLB1_MAS0(1, 4, 0)
 	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_64M)
 	.long TLB1_MAS2(E500_TLB_EPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,0,0,0)
 	.long TLB1_MAS3(E500_TLB_RPN(CFG_LBC_SDRAM_BASE), 0,0,0,0,0,1,0,1,0,1)
 
 	/*
-	 * TLBe 7:	256K	Non-cacheable, guarded
+	 * TLBe 5:	256K	Non-cacheable, guarded
 	 * 0xf8000000	32K BCSR
 	 * 0xf8008000	32K PIB (CS4)
 	 * 0xf8010000	32K PIB (CS5)
 	 */
-	.long TLB1_MAS0(1, 7, 0)
+	.long TLB1_MAS0(1, 5, 0)
 	.long TLB1_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K)
 	.long TLB1_MAS2(E500_TLB_EPN(CFG_BCSR_BASE), 0,0,0,0,1,0,1,0)
 	.long TLB1_MAS3(E500_TLB_RPN(CFG_BCSR_BASE), 0,0,0,0,0,1,0,1,0,1)
@@ -202,12 +190,12 @@ tlb1_entry:
  * LAW(Local Access Window) configuration:
  *
  *0)   0x0000_0000   0x7fff_ffff     DDR                     2G
- *1)   0x8000_0000   0x9fff_ffff     PCI1 MEM                256MB
- *2)   0xa000_0000   0xbfff_ffff     PCIe MEM                256MB
- *5)   0xc000_0000   0xdfff_ffff     SRIO                    256MB
+ *1)   0x8000_0000   0x9fff_ffff     PCI1 MEM                512MB
+ *2)   0xa000_0000   0xbfff_ffff     PCIe MEM                512MB
  *-)   0xe000_0000   0xe00f_ffff     CCSR                    1M
  *3)   0xe200_0000   0xe27f_ffff     PCI1 I/O                8M
- *4)   0xe280_0000   0xe2ff_ffff     PCIe I/0                8M
+ *4)   0xe280_0000   0xe2ff_ffff     PCIe I/O                8M
+ *5)   0xc000_0000   0xdfff_ffff     SRIO                    512MB
  *6.a) 0xf000_0000   0xf3ff_ffff     SDRAM                   64MB
  *6.b) 0xf800_0000   0xf800_7fff     BCSR                    32KB
  *6.c) 0xf800_8000   0xf800_ffff     PIB (CS4)		     32KB
@@ -226,20 +214,20 @@ tlb1_entry:
 #define LAWAR0  ((LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & LAWAR_SIZE_128M)) & ~LAWAR_EN)
 
 #define LAWBAR1 ((CFG_PCI1_MEM_BASE>>12) & 0xfffff)
-#define LAWAR1	(LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_256M))
+#define LAWAR1	(LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_512M))
 
 #define LAWBAR2 ((CFG_PEX_MEM_BASE>>12) & 0xfffff)
-#define LAWAR2	(LAWAR_EN | LAWAR_TRGT_IF_PEX | (LAWAR_SIZE & LAWAR_SIZE_256M))
+#define LAWAR2	(LAWAR_EN | LAWAR_TRGT_IF_PEX | (LAWAR_SIZE & LAWAR_SIZE_512M))
 
 #define LAWBAR3 ((CFG_PCI1_IO_PHYS>>12) & 0xfffff)
 #define LAWAR3	(LAWAR_EN | LAWAR_TRGT_IF_PCI1 | (LAWAR_SIZE & LAWAR_SIZE_8M))
 
 #define LAWBAR4 ((CFG_PEX_IO_PHYS>>12) & 0xfffff)
-#define LAWAR4  (LAWAR_EN | LAWAR_TRGT_IF_PEX | (LAWAR_SIZE & LAWAR_SIZE_16M))
+#define LAWAR4  (LAWAR_EN | LAWAR_TRGT_IF_PEX | (LAWAR_SIZE & LAWAR_SIZE_8M))
 
 
 #define LAWBAR5 ((CFG_SRIO_MEM_BASE>>12) & 0xfffff)
-#define LAWAR5	(LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_256M))
+#define LAWAR5	(LAWAR_EN | LAWAR_TRGT_IF_RIO | (LAWAR_SIZE & LAWAR_SIZE_512M))
 
 /* LBC window - maps 256M.  That's SDRAM, BCSR, PIBs, and Flash */
 #define LAWBAR6 ((CFG_LBC_SDRAM_BASE>>12) & 0xfffff)
diff --git a/board/mpc8568mds/mpc8568mds.c b/board/mpc8568mds/mpc8568mds.c
index 9c7960d47..818ff138a 100644
--- a/board/mpc8568mds/mpc8568mds.c
+++ b/board/mpc8568mds/mpc8568mds.c
@@ -27,9 +27,66 @@
 #include <asm/processor.h>
 #include <asm/immap_85xx.h>
 #include <spd.h>
+#include <i2c.h>
+#include <ioports.h>
 
 #include "bcsr.h"
 
+const qe_iop_conf_t qe_iop_conf_tab[] = {
+	/* GETH1 */
+	{4, 10, 1, 0, 2}, /* TxD0 */
+	{4,  9, 1, 0, 2}, /* TxD1 */
+	{4,  8, 1, 0, 2}, /* TxD2 */
+	{4,  7, 1, 0, 2}, /* TxD3 */
+	{4, 23, 1, 0, 2}, /* TxD4 */
+	{4, 22, 1, 0, 2}, /* TxD5 */
+	{4, 21, 1, 0, 2}, /* TxD6 */
+	{4, 20, 1, 0, 2}, /* TxD7 */
+	{4, 15, 2, 0, 2}, /* RxD0 */
+	{4, 14, 2, 0, 2}, /* RxD1 */
+	{4, 13, 2, 0, 2}, /* RxD2 */
+	{4, 12, 2, 0, 2}, /* RxD3 */
+	{4, 29, 2, 0, 2}, /* RxD4 */
+	{4, 28, 2, 0, 2}, /* RxD5 */
+	{4, 27, 2, 0, 2}, /* RxD6 */
+	{4, 26, 2, 0, 2}, /* RxD7 */
+	{4, 11, 1, 0, 2}, /* TX_EN */
+	{4, 24, 1, 0, 2}, /* TX_ER */
+	{4, 16, 2, 0, 2}, /* RX_DV */
+	{4, 30, 2, 0, 2}, /* RX_ER */
+	{4, 17, 2, 0, 2}, /* RX_CLK */
+	{4, 19, 1, 0, 2}, /* GTX_CLK */
+	{1, 31, 2, 0, 3}, /* GTX125 */
+
+	/* GETH2 */
+	{5, 10, 1, 0, 2}, /* TxD0 */
+	{5,  9, 1, 0, 2}, /* TxD1 */
+	{5,  8, 1, 0, 2}, /* TxD2 */
+	{5,  7, 1, 0, 2}, /* TxD3 */
+	{5, 23, 1, 0, 2}, /* TxD4 */
+	{5, 22, 1, 0, 2}, /* TxD5 */
+	{5, 21, 1, 0, 2}, /* TxD6 */
+	{5, 20, 1, 0, 2}, /* TxD7 */
+	{5, 15, 2, 0, 2}, /* RxD0 */
+	{5, 14, 2, 0, 2}, /* RxD1 */
+	{5, 13, 2, 0, 2}, /* RxD2 */
+	{5, 12, 2, 0, 2}, /* RxD3 */
+	{5, 29, 2, 0, 2}, /* RxD4 */
+	{5, 28, 2, 0, 2}, /* RxD5 */
+	{5, 27, 2, 0, 3}, /* RxD6 */
+	{5, 26, 2, 0, 2}, /* RxD7 */
+	{5, 11, 1, 0, 2}, /* TX_EN */
+	{5, 24, 1, 0, 2}, /* TX_ER */
+	{5, 16, 2, 0, 2}, /* RX_DV */
+	{5, 30, 2, 0, 2}, /* RX_ER */
+	{5, 17, 2, 0, 2}, /* RX_CLK */
+	{5, 19, 1, 0, 2}, /* GTX_CLK */
+	{1, 31, 2, 0, 3}, /* GTX125 */
+	{4,  6, 3, 0, 2}, /* MDIO */
+	{4,  5, 1, 0, 2}, /* MDC */
+	{0,  0, 0, 0, QE_IOP_TAB_END}, /* END of table */
+};
+
 
 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
 extern void ddr_enable_ecc(unsigned int dram_size);
@@ -49,6 +106,18 @@ int board_early_init_f (void)
 
 	enable_8568mds_duart();
 	enable_8568mds_flash_write();
+#if defined(CONFIG_QE) && !defined(CONFIG_eTSEC_MDIO_BUS)
+	enable_8568mds_qe_mdio();
+#endif
+
+#ifdef CFG_I2C2_OFFSET
+	/* Enable I2C2_SCL and I2C2_SDA */
+	volatile struct par_io *port_c;
+	port_c = (struct par_io*)(CFG_IMMR + 0xe0140);
+	port_c->cpdir2 |= 0x0f000000;
+	port_c->cppar2 &= ~0x0f000000;
+	port_c->cppar2 |= 0x0a000000;
+#endif
 
 	return 0;
 }
@@ -269,20 +338,62 @@ static struct pci_config_table pci_mpc8568mds_config_table[] = {
 #endif
 
 static struct pci_controller hose[] = {
+	{
 #ifndef CONFIG_PCI_PNP
-	{ config_table: pci_mpc8568mds_config_table,},
-#endif
-#ifdef CONFIG_MPC85XX_PCI2
-	{},
+	config_table: pci_mpc8568mds_config_table,
 #endif
+	}
 };
 
 #endif	/* CONFIG_PCI */
 
+/*
+ * pib_init() -- Initialize the PCA9555 IO expander on the PIB board
+ */
+void
+pib_init(void)
+{
+	u8 val8, orig_i2c_bus;
+	/*
+	 * Assign PIB PMC2/3 to PCI bus
+	 */
+
+	/*switch temporarily to I2C bus #2 */
+	orig_i2c_bus = i2c_get_bus_num();
+	i2c_set_bus_num(1);
+
+	val8 = 0x00;
+	i2c_write(0x23, 0x6, 1, &val8, 1);
+	i2c_write(0x23, 0x7, 1, &val8, 1);
+	val8 = 0xff;
+	i2c_write(0x23, 0x2, 1, &val8, 1);
+	i2c_write(0x23, 0x3, 1, &val8, 1);
+
+	val8 = 0x00;
+	i2c_write(0x26, 0x6, 1, &val8, 1);
+	val8 = 0x34;
+	i2c_write(0x26, 0x7, 1, &val8, 1);
+	val8 = 0xf9;
+	i2c_write(0x26, 0x2, 1, &val8, 1);
+	val8 = 0xff;
+	i2c_write(0x26, 0x3, 1, &val8, 1);
+
+	val8 = 0x00;
+	i2c_write(0x27, 0x6, 1, &val8, 1);
+	i2c_write(0x27, 0x7, 1, &val8, 1);
+	val8 = 0xff;
+	i2c_write(0x27, 0x2, 1, &val8, 1);
+	val8 = 0xef;
+	i2c_write(0x27, 0x3, 1, &val8, 1);
+
+	asm("eieio");
+}
+
 void
 pci_init_board(void)
 {
 #ifdef CONFIG_PCI
-	pci_mpc85xx_init(&hose);
+	pib_init();
+	pci_mpc85xx_init(hose);
 #endif
 }
diff --git a/cpu/mpc85xx/Makefile b/cpu/mpc85xx/Makefile
index ff67dcdd3..32091fa4e 100644
--- a/cpu/mpc85xx/Makefile
+++ b/cpu/mpc85xx/Makefile
@@ -30,7 +30,7 @@ LIB	= $(obj)lib$(CPU).a
 
 START	= start.o resetvec.o
 COBJS	= traps.o cpu.o cpu_init.o speed.o interrupts.o \
-	  pci.o serial_scc.o commproc.o ether_fcc.o spd_sdram.o
+	  pci.o serial_scc.o commproc.o ether_fcc.o spd_sdram.o qe_io.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
index 1d791c9b9..08e04685f 100644
--- a/cpu/mpc85xx/cpu.c
+++ b/cpu/mpc85xx/cpu.c
@@ -280,7 +280,7 @@ ft_cpu_setup(void *blob, bd_t *bd)
 	if (p != NULL)
 		*p = cpu_to_be32(clock);
 
-#if defined(CONFIG_TSEC1)
+#if defined(CONFIG_HAS_ETH0)
 	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len);
 	if (p)
 		memcpy(p, bd->bi_enetaddr, 6);
@@ -308,6 +308,17 @@ ft_cpu_setup(void *blob, bd_t *bd)
 	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/local-mac-address", &len);
 	if (p)
 		memcpy(p, bd->bi_enet2addr, 6);
+
+#ifdef CONFIG_UEC_ETH
+	p = ft_get_prop(blob, "/" OF_QE "/ucc@2000/mac-address", &len);
+	if (p)
+		memcpy(p, bd->bi_enet2addr, 6);
+
+	p = ft_get_prop(blob, "/" OF_QE "/ucc@2000/local-mac-address", &len);
+	if (p)
+		memcpy(p, bd->bi_enet2addr, 6);
+
+#endif
 #endif
 
 #if defined(CONFIG_HAS_ETH3)
@@ -318,6 +329,17 @@ ft_cpu_setup(void *blob, bd_t *bd)
 	p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/local-mac-address", &len);
 	if (p)
 		memcpy(p, bd->bi_enet3addr, 6);
+
+#ifdef CONFIG_UEC_ETH
+	p = ft_get_prop(blob, "/" OF_QE "/ucc@3000/mac-address", &len);
+	if (p)
+		memcpy(p, bd->bi_enet3addr, 6);
+
+	p = ft_get_prop(blob, "/" OF_QE "/ucc@3000/local-mac-address", &len);
+	if (p)
+		memcpy(p, bd->bi_enet3addr, 6);
+
+#endif
 #endif
 
 }
diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c
index 9517146ed..7b9961013 100644
--- a/cpu/mpc85xx/cpu_init.c
+++ b/cpu/mpc85xx/cpu_init.c
@@ -1,4 +1,6 @@
 /*
+ * Copyright 2007 Freescale Semiconductor.
+ *
  * (C) Copyright 2003 Motorola Inc.
  * Modified by Xianghua Xiao, X.Xiao@motorola.com
  *
@@ -32,6 +34,29 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#ifdef CONFIG_QE
+extern qe_iop_conf_t qe_iop_conf_tab[];
+extern void qe_config_iopin(u8 port, u8 pin, int dir,
+				int open_drain, int assign);
+extern void qe_init(uint qe_base);
+extern void qe_reset(void);
+
+static void config_qe_ioports(void)
+{
+	u8      port, pin;
+	int     dir, open_drain, assign;
+	int     i;
+
+	for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) {
+		port		= qe_iop_conf_tab[i].port;
+		pin		= qe_iop_conf_tab[i].pin;
+		dir		= qe_iop_conf_tab[i].dir;
+		open_drain	= qe_iop_conf_tab[i].open_drain;
+		assign		= qe_iop_conf_tab[i].assign;
+		qe_config_iopin(port, pin, dir, open_drain, assign);
+	}
+}
+#endif
 
 #ifdef CONFIG_CPM2
 static void config_8560_ioports (volatile immap_t * immr)
@@ -133,15 +158,18 @@ void cpu_init_f (void)
 #endif
 
 	/* now restrict to preliminary range */
+	/* if cs1 is already set via debugger, leave cs0/cs1 alone */
+	if (! memctl->br1 & 1) {
 #if defined(CFG_BR0_PRELIM) && defined(CFG_OR0_PRELIM)
-	memctl->br0 = CFG_BR0_PRELIM;
-	memctl->or0 = CFG_OR0_PRELIM;
+		memctl->br0 = CFG_BR0_PRELIM;
+		memctl->or0 = CFG_OR0_PRELIM;
 #endif
 
 #if defined(CFG_BR1_PRELIM) && defined(CFG_OR1_PRELIM)
-	memctl->or1 = CFG_OR1_PRELIM;
-	memctl->br1 = CFG_BR1_PRELIM;
+		memctl->or1 = CFG_OR1_PRELIM;
+		memctl->br1 = CFG_BR1_PRELIM;
 #endif
+	}
 
 #if defined(CFG_BR2_PRELIM) && defined(CFG_OR2_PRELIM)
 	memctl->or2 = CFG_OR2_PRELIM;
@@ -176,6 +204,11 @@ void cpu_init_f (void)
 #if defined(CONFIG_CPM2)
 	m8560_cpm_reset();
 #endif
+#ifdef CONFIG_QE
+	/* Config QE ioports */
+	config_qe_ioports();
+#endif
+
 }
 
 
@@ -185,16 +218,25 @@ void cpu_init_f (void)
  * The newer 8548, etc, parts have twice as much cache, but
  * use the same bit-encoding as the older 8555, etc, parts.
  *
- * FIXME: Use PVR_VER(pvr) == 1 test here instead of SVR_VER()?
  */
 
 int cpu_init_r(void)
 {
+#if defined(CONFIG_CLEAR_LAW0) || defined(CONFIG_L2_CACHE)
+	volatile immap_t    *immap = (immap_t *)CFG_IMMR;
+#endif
+#ifdef CONFIG_CLEAR_LAW0
+	volatile ccsr_local_ecm_t *ecm = &immap->im_local_ecm;
+
+	/* clear alternate boot location LAW (used for sdram, or ddr bank) */
+	ecm->lawar0 = 0;
+#endif
+
 #if defined(CONFIG_L2_CACHE)
-	volatile immap_t *immap = (immap_t *)CFG_IMMR;
 	volatile ccsr_l2cache_t *l2cache = &immap->im_l2cache;
 	volatile uint cache_ctl;
 	uint svr, ver;
+	uint l2srbar;
 
 	svr = get_svr();
 	ver = SVR_VER(svr);
@@ -204,33 +246,55 @@ int cpu_init_r(void)
 
 	switch (cache_ctl & 0x30000000) {
 	case 0x20000000:
-		if (ver == SVR_8548 || ver == SVR_8548_E) {
+		if (ver == SVR_8548 || ver == SVR_8548_E ||
+		    ver == SVR_8544) {
 			printf ("L2 cache 512KB:");
+			/* set L2E=1, L2I=1, & L2SRAM=0 */
+			cache_ctl = 0xc0000000;
 		} else {
 			printf ("L2 cache 256KB:");
+			/* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */
+			cache_ctl = 0xc8000000;
 		}
 		break;
-	case 0x00000000:
 	case 0x10000000:
+		printf ("L2 cache 256KB:");
+		if (ver == SVR_8544 || ver == SVR_8544_E) {
+			cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */
+		}
+		break;
 	case 0x30000000:
+	case 0x00000000:
 	default:
 		printf ("L2 cache unknown size (0x%08x)\n", cache_ctl);
 		return -1;
 	}
 
-	asm("msync;isync");
-	l2cache->l2ctl = 0x68000000; /* invalidate */
-	cache_ctl = l2cache->l2ctl;
-	asm("msync;isync");
-
-	l2cache->l2ctl = 0xa8000000; /* enable 256KB L2 cache */
-	cache_ctl = l2cache->l2ctl;
-	asm("msync;isync");
-
-	printf(" enabled\n");
+	if (l2cache->l2ctl & 0x80000000) {
+		printf(" already enabled.");
+		l2srbar = l2cache->l2srbar0;
+#ifdef CFG_INIT_L2_ADDR
+		if (l2cache->l2ctl & 0x00010000 && l2srbar >= CFG_FLASH_BASE) {
+			l2srbar = CFG_INIT_L2_ADDR;
+			l2cache->l2srbar0 = l2srbar;
+			printf("  Moving to 0x%08x", CFG_INIT_L2_ADDR);
+		}
+#endif /* CFG_INIT_L2_ADDR */
+		puts("\n");
+	} else {
+		asm("msync;isync");
+		l2cache->l2ctl = cache_ctl; /* invalidate & enable */
+		asm("msync;isync");
+		printf(" enabled\n");
+	}
 #else
 	printf("L2 cache: disabled\n");
 #endif
+#ifdef CONFIG_QE
+	uint qe_base = CFG_IMMR + 0x00080000; /* QE immr base */
+	qe_init(qe_base);
+	qe_reset();
+#endif
 
 	return 0;
 }
diff --git a/cpu/mpc85xx/interrupts.c b/cpu/mpc85xx/interrupts.c
index dc246dca0..bf737d622 100644
--- a/cpu/mpc85xx/interrupts.c
+++ b/cpu/mpc85xx/interrupts.c
@@ -89,6 +89,39 @@ int interrupt_init (void)
 	mtspr(SPRN_TCR, TCR_PIE);
 	set_dec (decrementer_count);
 	set_msr (get_msr () | MSR_EE);
+
+#ifdef CONFIG_INTERRUPTS
+	volatile ccsr_pic_t *pic = &immr->im_pic;
+
+	pic->iivpr1 = 0x810002;	/* 50220 enable ecm interrupts */
+	debug("iivpr1@%x = %x\n",&pic->iivpr1, pic->iivpr1);
+
+	pic->iivpr2 = 0x810002;	/* 50240 enable ddr interrupts */
+	debug("iivpr2@%x = %x\n",&pic->iivpr2, pic->iivpr2);
+
+	pic->iivpr3 = 0x810003;	/* 50260 enable lbc interrupts */
+	debug("iivpr3@%x = %x\n",&pic->iivpr3, pic->iivpr3);
+
+#ifdef CONFIG_PCI1
+	pic->iivpr8 = 0x810008;	/* enable pci1 interrupts */
+	debug("iivpr8@%x = %x\n",&pic->iivpr8, pic->iivpr8);
+#endif
+#if defined(CONFIG_PCI2) || defined(CONFIG_PCIE2)
+	pic->iivpr9 = 0x810009;	/* enable pci1 interrupts */
+	debug("iivpr9@%x = %x\n",&pic->iivpr9, pic->iivpr9);
+#endif
+#ifdef CONFIG_PCIE1
+	pic->iivpr10 = 0x81000a;	/* enable pcie1 interrupts */
+	debug("iivpr10@%x = %x\n",&pic->iivpr10, pic->iivpr10);
+#endif
+#ifdef CONFIG_PCIE3
+	pic->iivpr11 = 0x81000b;	/* enable pcie3 interrupts */
+	debug("iivpr11@%x = %x\n",&pic->iivpr11, pic->iivpr11);
+#endif
+
+	pic->ctpr=0;		/* 40080 clear current task priority register */
+#endif
+
 	return (0);
 }
 
diff --git a/cpu/mpc85xx/pci.c b/cpu/mpc85xx/pci.c
index 3c1a323aa..db09e45fb 100644
--- a/cpu/mpc85xx/pci.c
+++ b/cpu/mpc85xx/pci.c
@@ -142,7 +142,7 @@ pci_mpc85xx_init(struct pci_controller *board_hose)
 		u8 header_type;
 
 		pci_hose_read_config_byte(hose,
-					  PCI_BDF(0,17,0),
+					  PCI_BDF(0,BRIDGE_ID,0),
 					  PCI_HEADER_TYPE,
 					  &header_type);
 	}
diff --git a/cpu/mpc85xx/qe_io.c b/cpu/mpc85xx/qe_io.c
new file mode 100644
index 000000000..8878bc531
--- /dev/null
+++ b/cpu/mpc85xx/qe_io.c
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2006 Freescale Semiconductor, Inc.
+ *
+ * Dave Liu <daveliu@freescale.com>
+ * based on source code of Shlomi Gridish
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include "common.h"
+#include "asm/errno.h"
+#include "asm/io.h"
+#include "asm/immap_85xx.h"
+
+#if defined(CONFIG_QE)
+#define	NUM_OF_PINS	32
+void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
+{
+	u32			pin_2bit_mask;
+	u32			pin_2bit_dir;
+	u32			pin_2bit_assign;
+	u32			pin_1bit_mask;
+	u32			tmp_val;
+	volatile immap_t	*im = (volatile immap_t *)CFG_IMMR;
+	volatile par_io_t	*par_io = (volatile par_io_t *)
+						&(im->im_gur.qe_par_io);
+
+	/* Caculate pin location and 2bit mask and dir */
+	pin_2bit_mask = (u32)(0x3 << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
+	pin_2bit_dir = (u32)(dir << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
+
+	/* Setup the direction */
+	tmp_val = (pin > (NUM_OF_PINS/2) - 1) ? \
+		in_be32(&par_io[port].cpdir2) :
+		in_be32(&par_io[port].cpdir1);
+
+	if (pin > (NUM_OF_PINS/2) -1) {
+		out_be32(&par_io[port].cpdir2, ~pin_2bit_mask & tmp_val);
+		out_be32(&par_io[port].cpdir2, pin_2bit_dir | tmp_val);
+	} else {
+		out_be32(&par_io[port].cpdir1, ~pin_2bit_mask & tmp_val);
+		out_be32(&par_io[port].cpdir1, pin_2bit_dir | tmp_val);
+	}
+
+	/* Calculate pin location for 1bit mask */
+	pin_1bit_mask = (u32)(1 << (NUM_OF_PINS - (pin+1)));
+
+	/* Setup the open drain */
+	tmp_val = in_be32(&par_io[port].cpodr);
+	if (open_drain)
+		out_be32(&par_io[port].cpodr, pin_1bit_mask | tmp_val);
+	else
+		out_be32(&par_io[port].cpodr, ~pin_1bit_mask & tmp_val);
+
+	/* Setup the assignment */
+	tmp_val = (pin > (NUM_OF_PINS/2) - 1) ?
+		in_be32(&par_io[port].cppar2):
+		in_be32(&par_io[port].cppar1);
+	pin_2bit_assign = (u32)(assign
+				<< (NUM_OF_PINS - (pin%(NUM_OF_PINS/2)+1)*2));
+
+	/* Clear and set 2 bits mask */
+	if (pin > (NUM_OF_PINS/2) - 1) {
+		out_be32(&par_io[port].cppar2, ~pin_2bit_mask & tmp_val);
+		out_be32(&par_io[port].cppar2, pin_2bit_assign | tmp_val);
+	} else {
+		out_be32(&par_io[port].cppar1, ~pin_2bit_mask & tmp_val);
+		out_be32(&par_io[port].cppar1, pin_2bit_assign | tmp_val);
+	}
+}
+
+#endif /* CONFIG_QE */
diff --git a/cpu/mpc85xx/spd_sdram.c b/cpu/mpc85xx/spd_sdram.c
index 3777f49ad..5dc223a53 100644
--- a/cpu/mpc85xx/spd_sdram.c
+++ b/cpu/mpc85xx/spd_sdram.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2004, 2007 Freescale Semiconductor.
  * (C) Copyright 2003 Motorola Inc.
  * Xianghua Xiao (X.Xiao@motorola.com)
  *
@@ -173,11 +173,10 @@ spd_sdram(void)
 {
 	volatile immap_t *immap = (immap_t *)CFG_IMMR;
 	volatile ccsr_ddr_t *ddr = &immap->im_ddr;
-	volatile ccsr_gur_t *gur = &immap->im_gur;
 	spd_eeprom_t spd;
 	unsigned int n_ranks;
 	unsigned int rank_density;
-	unsigned int odt_rd_cfg, odt_wr_cfg;
+	unsigned int odt_rd_cfg, odt_wr_cfg, ba_bits;
 	unsigned int odt_cfg, mode_odt_enable;
 	unsigned int refresh_clk;
 #ifdef MPC85xx_DDR_SDRAM_CLK_CNTL
@@ -189,7 +188,7 @@ spd_sdram(void)
 	unsigned int max_data_rate, effective_data_rate;
 	unsigned int busfreq;
 	unsigned sdram_cfg;
-	unsigned int memsize;
+	unsigned int memsize = 0;
 	unsigned char caslat, caslat_ctrl;
 	unsigned int trfc, trfc_clk, trfc_low, trfc_high;
 	unsigned int trcd_clk;
@@ -204,6 +203,46 @@ spd_sdram(void)
 	unsigned int mode_caslat;
 	unsigned char sdram_type;
 	unsigned char d_init;
+	unsigned int bnds;
+
+	/*
+	 * Skip configuration if already configured.
+	 * memsize is determined from last configured chip select.
+	 */
+	if (ddr->cs0_config & 0x80000000) {
+		debug(" cs0 already configured, bnds=%x\n",ddr->cs0_bnds);
+		bnds = 0xfff & ddr->cs0_bnds;
+		if (bnds < 0xff) { /* do not add if at top of 4G */
+			memsize = (bnds + 1) << 4;
+		}
+	}
+	if (ddr->cs1_config & 0x80000000) {
+		debug(" cs1 already configured, bnds=%x\n",ddr->cs1_bnds);
+		bnds = 0xfff & ddr->cs1_bnds;
+		if (bnds < 0xff) { /* do not add if at top of 4G */
+			memsize = (bnds + 1) << 4; /* assume ordered bnds */
+		}
+	}
+	if (ddr->cs2_config & 0x80000000) {
+		debug(" cs2 already configured, bnds=%x\n",ddr->cs2_bnds);
+		bnds = 0xfff & ddr->cs2_bnds;
+		if (bnds < 0xff) { /* do not add if at top of 4G */
+			memsize = (bnds + 1) << 4;
+		}
+	}
+	if (ddr->cs3_config & 0x80000000) {
+		debug(" cs3 already configured, bnds=%x\n",ddr->cs3_bnds);
+		bnds = 0xfff & ddr->cs3_bnds;
+		if (bnds < 0xff) { /* do not add if at top of 4G */
+			memsize = (bnds + 1) << 4;
+		}
+	}
+
+	if (memsize) {
+		printf("       Reusing current %dMB configuration\n",memsize);
+		memsize = setup_laws_and_tlbs(memsize);
+		return memsize << 20;
+	}
 
 	/*
 	 * Read SPD information.
@@ -262,6 +301,7 @@ spd_sdram(void)
 		return 0;
 	}
 
+#ifdef CONFIG_MPC8548
 	/*
 	 * Adjust DDR II IO voltage biasing.
 	 * Only 8548 rev 1 needs the fix
@@ -269,9 +309,11 @@ spd_sdram(void)
 	if ((SVR_VER(get_svr()) == SVR_8548_E) &&
 			(SVR_MJREV(get_svr()) == 1) &&
 			(spd.mem_type == SPD_MEMTYPE_DDR2)) {
+		volatile ccsr_gur_t *gur = &immap->im_gur;
 		gur->ddrioovcr = (0x80000000	/* Enable */
 				  | 0x10000000);/* VSEL to 1.8V */
 	}
+#endif
 
 	/*
 	 * Determine the size of each Rank in bytes.
@@ -299,9 +341,14 @@ spd_sdram(void)
 #endif
 	}
 
+	ba_bits = 0;
+	if (spd.nbanks == 0x8)
+		ba_bits = 1;
+
 	ddr->cs0_config = ( 1 << 31
 			    | (odt_rd_cfg << 20)
 			    | (odt_wr_cfg << 16)
+			    | (ba_bits << 14)
 			    | (spd.nrow_addr - 12) << 8
 			    | (spd.ncol_addr - 8) );
 	debug("\n");
@@ -645,13 +692,10 @@ spd_sdram(void)
 	 */
 	cpo = 0;
 	if (spd.mem_type == SPD_MEMTYPE_DDR2) {
-		if (effective_data_rate == 266 || effective_data_rate == 333) {
+		if (effective_data_rate <= 333) {
 			cpo = 0x7;		/* READ_LAT + 5/4 */
-		} else if (effective_data_rate == 400) {
-			cpo = 0x9;		/* READ_LAT + 7/4 */
 		} else {
-			/* Pure speculation */
-			cpo = 0xb;
+			cpo = 0x9;		/* READ_LAT + 7/4 */
 		}
 	}
 
@@ -858,7 +902,12 @@ spd_sdram(void)
 	if (spd.mem_type == SPD_MEMTYPE_DDR)
 		clk_adjust = 0x6;
 	else
+#ifdef CONFIG_MPC8568
+		/* Empirally setting clk_adjust */
+		clk_adjust = 0x6;
+#else
 		clk_adjust = 0x7;
+#endif
 
 	ddr->sdram_clk_cntl = (0
 			       | 0x80000000
diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S
index 77c155c5b..2c98c2ad8 100644
--- a/cpu/mpc85xx/start.S
+++ b/cpu/mpc85xx/start.S
@@ -1,7 +1,6 @@
 /*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2004, 2007 Freescale Semiconductor.
  * Copyright (C) 2003  Motorola,Inc.
- * Xianghua Xiao<X.Xiao@motorola.com>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -46,7 +45,7 @@
 #endif
 
 #undef	MSR_KERNEL
-#define MSR_KERNEL ( MSR_ME  )	/* Machine Check */
+#define MSR_KERNEL ( MSR_ME )	/* Machine Check */
 
 /*
  * Set up GOT: Global Offset Table
@@ -80,110 +79,37 @@
  *
  */
 
-    .section .bootpg,"ax"
-    .globl _start_e500
+	.section .bootpg,"ax"
+	.globl _start_e500
 
 _start_e500:
-	mfspr	r0, PVR
-	lis	r1, PVR_85xx_REV1@h
-	ori	r1, r1, PVR_85xx_REV1@l
-	cmpw	r0, r1
-	bne	1f
 
-	/* Semi-bogus errata fixup for Rev 1 */
-	li	r0,0x2000
-	mtspr	977,r0
+/* clear registers/arrays not reset by hardware */
 
-	/*
-	 * Before invalidating MMU L1/L2, read TLB1 Entry 0 and then
-	 * write it back immediately to fixup a Rev 1 bug (Errata CPU4)
-	 * for this initial TLB1 entry 0, otherwise the TLB1 entry 0
-	 * will be invalidated (incorrectly).
-	 */
-	lis	r2,0x1000
-	mtspr	MAS0,r2
-	tlbre
-	tlbwe
-	isync
-
-1:
-	/*
-	 * Clear and set up some registers.
-	 * Note: Some registers need strict synchronization by
-	 * sync/mbar/msync/isync when being "mtspr".
-	 * BookE: isync before PID,tlbivax,tlbwe
-	 * BookE: isync after MSR,PID; msync_isync after tlbivax & tlbwe
-	 * E500:  msync,isync before L1CSR0
-	 * E500:  isync after BBEAR,BBTAR,BUCSR,DBCR0,DBCR1,HID0,HID1,
-	 *	  L1CSR0, L1CSR1, MAS[0,1,2,3,4,6],MMUCSR0, PID[0,1,2],
-	 *	  SPEFCSR
-	 */
-
-	/* invalidate d-cache */
-	mfspr	r0,L1CSR0
-	ori	r0,r0,0x0002
-	msync
-	isync
-	mtspr	L1CSR0,r0
-	isync
-
-	/* disable d-cache */
-	li	r0,0x0
-	mtspr	L1CSR0,r0
-
-	/* invalidate i-cache */
-	mfspr	r0,L1CSR1
-	ori	r0,r0,0x0002
-	mtspr	L1CSR1,r0
-	isync
-
-	/* disable i-cache */
-	li	r0,0x0
-	mtspr	L1CSR1,r0
-	isync
-
-	/* clear registers */
-	li	r0,0
-	mtspr	SRR0,r0
-	mtspr	SRR1,r0
-	mtspr	CSRR0,r0
-	mtspr	CSRR1,r0
-	mtspr	MCSRR0,r0
-	mtspr	MCSRR1,r0
-
-	mtspr	ESR,r0
-	mtspr	MCSR,r0
-	mtspr	DEAR,r0
-
-	/* not needed and conflicts with some debuggers */
-	/* mtspr	DBCR0,r0 */
-	mtspr	DBCR1,r0
-	mtspr	DBCR2,r0
-	/* not needed and conflicts with some debuggers */
-	/* mtspr	IAC1,r0 */
-	/* mtspr	IAC2,r0 */
-	mtspr	DAC1,r0
-	mtspr	DAC2,r0
+	/* L1 */
+	li	r0,2
+	mtspr	L1CSR0,r0	/* invalidate d-cache */
+	mtspr	L1CSR1,r0 	/* invalidate i-cache */
 
 	mfspr	r1,DBSR
 	mtspr	DBSR,r1		/* Clear all valid bits */
 
-	mtspr	PID0,r0
-	mtspr	PID1,r0
-	mtspr	PID2,r0
-	mtspr	TCR,r0
+	/*
+	 *	Enable L1 Caches early
+	 *
+	 */
 
-	mtspr	BUCSR,r0	/* disable branch prediction */
-	mtspr	MAS4,r0
-	mtspr	MAS6,r0
-#if defined(CONFIG_ENABLE_36BIT_PHYS)
-	mtspr	MAS7,r0
-#endif
+	lis	r2,L1CSR0_CPE@H	/* enable parity */
+	ori	r2,r2,L1CSR0_DCE
+	mtspr	L1CSR0,r2	/* enable L1 Dcache */
+	isync
+	mtspr	L1CSR1,r2	/* enable L1 Icache */
 	isync
+	msync
 
 	/* Setup interrupt vectors */
 	lis	r1,TEXT_BASE@h
-	mtspr IVPR, r1
+	mtspr	IVPR,r1
 
 	li	r1,0x0100
 	mtspr	IVOR0,r1	/* 0: Critical input */
@@ -217,26 +143,6 @@ _start_e500:
 	li	r1,0x0f00
 	mtspr	IVOR15,r1	/* 15: Debug */
 
-	/*
-	 * Invalidate MMU L1/L2
-	 *
-	 * Note: There is a fixup earlier for Errata CPU4 on
-	 * Rev 1 parts that must precede this MMU invalidation.
-	 */
-	li	r2, 0x001e
-	mtspr	MMUCSR0, r2
-	isync
-
-	/*
-	 * Invalidate all TLB0 entries.
-	 */
-	li	r3,4
-	li	r4,0
-	tlbivax r4,r3
-	/*
-	 * To avoid REV1 Errata CPU6 issues, make sure
-	 * the instruction following tlbivax is not a store.
-	 */
 
 	/*
 	 * After reset, CCSRBAR is located at CFG_CCSRBAR_DEFAULT, i.e.
@@ -254,14 +160,14 @@ _start_e500:
 	lwzu	r4,0(r5)	/* how many TLB1 entries we actually use */
 	mtctr	r4
 
-0:	lwzu	r0,4(r5)
-	lwzu	r1,4(r5)
-	lwzu	r2,4(r5)
-	lwzu	r3,4(r5)
-	mtspr	MAS0,r0
-	mtspr	MAS1,r1
-	mtspr	MAS2,r2
-	mtspr	MAS3,r3
+0:	lwzu	r6,4(r5)
+	lwzu	r7,4(r5)
+	lwzu	r8,4(r5)
+	lwzu	r9,4(r5)
+	mtspr	MAS0,r6
+	mtspr	MAS1,r7
+	mtspr	MAS2,r8
+	mtspr	MAS3,r9
 	isync
 	msync
 	tlbwe
@@ -271,22 +177,22 @@ _start_e500:
 1:
 #if (CFG_CCSRBAR_DEFAULT != CFG_CCSRBAR)
 	/* Special sequence needed to update CCSRBAR itself */
-	lis	r4, CFG_CCSRBAR_DEFAULT@h
-	ori	r4, r4, CFG_CCSRBAR_DEFAULT@l
+	lis	r4,CFG_CCSRBAR_DEFAULT@h
+	ori	r4,r4,CFG_CCSRBAR_DEFAULT@l
 
-	lis	r5, CFG_CCSRBAR@h
-	ori	r5, r5, CFG_CCSRBAR@l
+	lis	r5,CFG_CCSRBAR@h
+	ori	r5,r5,CFG_CCSRBAR@l
 	srwi	r6,r5,12
-	stw	r6, 0(r4)
+	stw	r6,0(r4)
 	isync
 
-	lis	r5, 0xffff
+	lis	r5,0xffff
 	ori	r5,r5,0xf000
-	lwz	r5, 0(r5)
+	lwz	r5,0(r5)
 	isync
 
-	lis	r3, CFG_CCSRBAR@h
-	lwz	r5, CFG_CCSRBAR@l(r3)
+	lis	r3,CFG_CCSRBAR@h
+	lwz	r5,CFG_CCSRBAR@l(r3)
 	isync
 #endif
 
@@ -300,8 +206,8 @@ _start_e500:
 	lwzu	r5,0(r6)	/* how many windows we actually use */
 	mtctr	r5
 
-	li	r2,0x0c28	/* the first pair is reserved for boot-over-rio-or-pci */
-	li	r1,0x0c30
+	li	r2,0x0c28	/* the first pair is reserved for */
+	li	r1,0x0c30	/* boot-over-rio-or-pci */
 
 0:	lwzu	r4,4(r6)
 	lwzu	r3,4(r6)
@@ -311,31 +217,6 @@ _start_e500:
 	addi	r1,r1,0x0020
 	bdnz	0b
 
-	/* Jump out the last 4K page and continue to 'normal' start */
-1:	bl	3f
-	b	_start
-
-3:	li	r0,0
-	mtspr	SRR1,r0		/* Keep things disabled for now */
-	mflr	r1
-	mtspr	SRR0,r1
-	rfi
-
-/*
- * r3 - 1st arg to board_init(): IMMP pointer
- * r4 - 2nd arg to board_init(): boot flag
- */
-	.text
-	.long	0x27051956		/* U-BOOT Magic Number			*/
-	.globl	version_string
-version_string:
-	.ascii U_BOOT_VERSION
-	.ascii " (", __DATE__, " - ", __TIME__, ")"
-	.ascii CONFIG_IDENT_STRING, "\0"
-
-	. = EXC_OFF_SYS_RESET
-	.globl	_start
-_start:
 	/* Clear and set up some registers. */
 	li	r0,0x0000
 	lis	r1,0xffff
@@ -354,17 +235,14 @@ _start:
 
 	/* Enable Time Base and Select Time Base Clock */
 	lis	r0,HID0_EMCP@h		/* Enable machine check */
-	ori	r0,r0,0x4000		/* time base is processor clock */
 #if defined(CONFIG_ENABLE_36BIT_PHYS)
-	ori	r0,r0,0x0080		/* enable MAS7 updates */
+	ori	r0,r0,(HID0_TBEN|HID0_ENMAS7)@l	/* Enable Timebase & MAS7 */
+#else
+	ori	r0,r0,HID0_TBEN@l	/* enable Timebase */
 #endif
 	mtspr	HID0,r0
 
-#if defined(CONFIG_ADDR_STREAMING)
-	li	r0,0x3000
-#else
-	li	r0,0x1000
-#endif
+	li	r0,(HID1_ASTME|HID1_ABE)@l	/* Addr streaming & broadcast */
 	mtspr	HID1,r0
 
 	/* Enable Branch Prediction */
@@ -383,37 +261,53 @@ _start:
 #endif
 
 /* L1 DCache is used for initial RAM */
-	mfspr	r2, L1CSR0
-	ori	r2, r2, 0x0003
-	oris	r2, r2, 0x0001
-	mtspr	L1CSR0, r2	/* enable/invalidate L1 Dcache */
-	isync
 
 	/* Allocate Initial RAM in data cache.
 	 */
-	lis	r3, CFG_INIT_RAM_ADDR@h
-	ori	r3, r3, CFG_INIT_RAM_ADDR@l
-	li	r2, 512 /* 512*32=16K */
+	lis	r3,CFG_INIT_RAM_ADDR@h
+	ori	r3,r3,CFG_INIT_RAM_ADDR@l
+	li	r2,512 /* 512*32=16K */
 	mtctr	r2
-	li	r0, 0
+	li	r0,0
 1:
-	dcbz	r0, r3
-	dcbtls	0,r0, r3
-	addi	r3, r3, 32
+	dcbz	r0,r3
+	dcbtls	0,r0,r3
+	addi	r3,r3,32
 	bdnz	1b
 
-#ifndef CFG_RAMBOOT
+	/* Jump out the last 4K page and continue to 'normal' start */
+#ifdef CFG_RAMBOOT
+	bl	3f
+	b	_start_cont
+#else
 	/* Calculate absolute address in FLASH and jump there		*/
 	/*--------------------------------------------------------------*/
-	lis	r3, CFG_MONITOR_BASE@h
-	ori	r3, r3, CFG_MONITOR_BASE@l
-	addi	r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
+	lis	r3,CFG_MONITOR_BASE@h
+	ori	r3,r3,CFG_MONITOR_BASE@l
+	addi	r3,r3,_start_cont - _start + _START_OFFSET
 	mtlr	r3
-	blr
+#endif
 
-in_flash:
-#endif	/* CFG_RAMBOOT */
+3:	li	r0,0
+	mtspr	SRR1,r0		/* Keep things disabled for now */
+	mflr	r1
+	mtspr	SRR0,r1
+	rfi
+	isync
+
+	.text
+	.globl	_start
+_start:
+	.long	0x27051956		/* U-BOOT Magic Number */
+	.globl	version_string
+version_string:
+	.ascii U_BOOT_VERSION
+	.ascii " (", __DATE__, " - ", __TIME__, ")"
+	.ascii CONFIG_IDENT_STRING, "\0"
 
+	.align	4
+	.globl	_start_cont
+_start_cont:
 	/* Setup the stack in initial RAM,could be L2-as-SRAM or L1 dcache*/
 	lis	r1,CFG_INIT_RAM_ADDR@h
 	ori	r1,r1,CFG_INIT_SP_OFFSET@l
@@ -424,26 +318,24 @@ in_flash:
 
 	stwu	r1,-8(r1)		/* Save back chain and move SP */
 	lis	r0,RESET_VECTOR@h	/* Address of reset vector */
-	ori	r0,r0, RESET_VECTOR@l
+	ori	r0,r0,RESET_VECTOR@l
 	stwu	r1,-8(r1)		/* Save back chain and move SP */
 	stw	r0,+12(r1)		/* Save return addr (underflow vect) */
 
 	GET_GOT
 	bl	cpu_init_f
-	bl	icache_enable
 	bl	board_init_f
 	isync
 
-/* --FIXME-- machine check with MCSRRn and rfmci */
-
+	. = EXC_OFF_SYS_RESET
 	.globl	_start_of_vectors
 _start_of_vectors:
-#if 0
+
 /* Critical input. */
-	CRIT_EXCEPTION(0x0100, CritcalInput, CritcalInputException)
-#endif
-/* Machine check --FIXME-- Should be MACH_EXCEPTION */
-	CRIT_EXCEPTION(0x0200, MachineCheck, MachineCheckException)
+	CRIT_EXCEPTION(0x0100, CriticalInput, CritcalInputException)
+
+/* Machine check */
+	MCK_EXCEPTION(0x200, MachineCheck, MachineCheckException)
 
 /* Data Storage exception. */
 	STD_EXCEPTION(0x0300, DataStorage, UnknownException)
@@ -452,7 +344,7 @@ _start_of_vectors:
 	STD_EXCEPTION(0x0400, InstStorage, UnknownException)
 
 /* External Interrupt exception. */
-	STD_EXCEPTION(0x0500, ExtInterrupt, UnknownException)
+	STD_EXCEPTION(0x0500, ExtInterrupt, ExtIntException)
 
 /* Alignment exception. */
 	. = 0x0600
@@ -469,8 +361,8 @@ Alignment:
 	mtlr	r6
 	blrl
 .L_Alignment:
-	.long	AlignmentException - _start + EXC_OFF_SYS_RESET
-	.long	int_return - _start + EXC_OFF_SYS_RESET
+	.long	AlignmentException - _start + _START_OFFSET
+	.long	int_return - _start + _START_OFFSET
 
 /* Program check exception */
 	. = 0x0700
@@ -483,8 +375,8 @@ ProgramCheck:
 	mtlr	r6
 	blrl
 .L_ProgramCheck:
-	.long	ProgramCheckException - _start + EXC_OFF_SYS_RESET
-	.long	int_return - _start + EXC_OFF_SYS_RESET
+	.long	ProgramCheckException - _start + _START_OFFSET
+	.long	int_return - _start + _START_OFFSET
 
 	/* No FPU on MPC85xx.  This exception is not supposed to happen.
 	*/
@@ -496,23 +388,23 @@ ProgramCheck:
  * r3-... arguments
  */
 SystemCall:
-	addis	r11,r0,0		/* get functions table addr */
-	ori	r11,r11,0		/* Note: this code is patched in trap_init */
-	addis	r12,r0,0		/* get number of functions */
+	addis	r11,r0,0	/* get functions table addr */
+	ori	r11,r11,0	/* Note: this code is patched in trap_init */
+	addis	r12,r0,0	/* get number of functions */
 	ori	r12,r12,0
 
-	cmplw	0, r0, r12
+	cmplw	0,r0,r12
 	bge	1f
 
-	rlwinm	r0,r0,2,0,31		/* fn_addr = fn_tbl[r0] */
+	rlwinm	r0,r0,2,0,31	/* fn_addr = fn_tbl[r0] */
 	add	r11,r11,r0
 	lwz	r11,0(r11)
 
-	li	r20,0xd00-4		/* Get stack pointer */
+	li	r20,0xd00-4	/* Get stack pointer */
 	lwz	r12,0(r20)
-	subi	r12,r12,12		/* Adjust stack pointer */
+	subi	r12,r12,12	/* Adjust stack pointer */
 	li	r0,0xc00+_end_back-SystemCall
-	cmplw	0, r0, r12		/* Check stack overflow */
+	cmplw	0,r0,r12	/* Check stack overflow */
 	bgt	1f
 	stw	r12,0(r20)
 
@@ -570,7 +462,7 @@ _end_back:
 _end_of_vectors:
 
 
-	. = 0x2100
+	. = . + (0x100 - ( . & 0xff ))	/* align for debug */
 
 /*
  * This code finishes saving the registers to the exception frame
@@ -655,26 +547,58 @@ crit_return:
 	REST_GPR(31, r1)
 	lwz	r2,_NIP(r1)	/* Restore environment */
 	lwz	r0,_MSR(r1)
-	mtspr	990,r2		/* SRR2 */
-	mtspr	991,r0		/* SRR3 */
+	mtspr	SPRN_CSRR0,r2
+	mtspr	SPRN_CSRR1,r0
 	lwz	r0,GPR0(r1)
 	lwz	r2,GPR2(r1)
 	lwz	r1,GPR1(r1)
 	SYNC
 	rfci
 
+mck_return:
+	mfmsr	r28		/* Disable interrupts */
+	li	r4,0
+	ori	r4,r4,MSR_EE
+	andc	r28,r28,r4
+	SYNC			/* Some chip revs need this... */
+	mtmsr	r28
+	SYNC
+	lwz	r2,_CTR(r1)
+	lwz	r0,_LINK(r1)
+	mtctr	r2
+	mtlr	r0
+	lwz	r2,_XER(r1)
+	lwz	r0,_CCR(r1)
+	mtspr	XER,r2
+	mtcrf	0xFF,r0
+	REST_10GPRS(3, r1)
+	REST_10GPRS(13, r1)
+	REST_8GPRS(23, r1)
+	REST_GPR(31, r1)
+	lwz	r2,_NIP(r1)	/* Restore environment */
+	lwz	r0,_MSR(r1)
+	mtspr	SPRN_MCSRR0,r2
+	mtspr	SPRN_MCSRR1,r0
+	lwz	r0,GPR0(r1)
+	lwz	r2,GPR2(r1)
+	lwz	r1,GPR1(r1)
+	SYNC
+	rfmci
+
 /* Cache functions.
 */
 invalidate_icache:
 	mfspr	r0,L1CSR1
-	ori	r0,r0,0x0002
+	ori	r0,r0,L1CSR1_ICFI
+	msync
+	isync
 	mtspr	L1CSR1,r0
 	isync
-	blr				/*   entire I cache */
+	blr				/* entire I cache */
 
 invalidate_dcache:
 	mfspr	r0,L1CSR0
-	ori	r0,r0,0x0002
+	ori	r0,r0,L1CSR0_DCFI
 	msync
 	isync
 	mtspr	L1CSR0,r0
@@ -697,9 +621,9 @@ icache_enable:
 	.globl	icache_disable
 icache_disable:
 	mfspr	r0,L1CSR1
-	lis	r1,0xfffffffe@h
-	ori	r1,r1,0xfffffffe@l
-	and	r0,r0,r1
+	lis	r3,0
+	ori	r3,r3,L1CSR1_ICE
+	andc	r0,r0,r3
 	mtspr	L1CSR1,r0
 	isync
 	blr
@@ -707,7 +631,7 @@ icache_disable:
 	.globl	icache_status
 icache_status:
 	mfspr	r3,L1CSR1
-	andi.	r3,r3,1
+	andi.	r3,r3,L1CSR1_ICE
 	blr
 
 	.globl	dcache_enable
@@ -727,12 +651,10 @@ dcache_enable:
 
 	.globl	dcache_disable
 dcache_disable:
-	mfspr	r0,L1CSR0
-	lis	r1,0xfffffffe@h
-	ori	r1,r1,0xfffffffe@l
-	and	r0,r0,r1
-	msync
-	isync
+	mfspr	r3,L1CSR0
+	lis	r4,0
+	ori	r4,r4,L1CSR0_DCE
+	andc	r3,r3,r4
 	mtspr	L1CSR0,r0
 	isync
 	blr
@@ -740,27 +662,27 @@ dcache_disable:
 	.globl	dcache_status
 dcache_status:
 	mfspr	r3,L1CSR0
-	andi.	r3,r3,1
+	andi.	r3,r3,L1CSR0_DCE
 	blr
 
 	.globl get_pir
 get_pir:
-	mfspr	r3, PIR
+	mfspr	r3,PIR
 	blr
 
 	.globl get_pvr
 get_pvr:
-	mfspr	r3, PVR
+	mfspr	r3,PVR
 	blr
 
 	.globl get_svr
 get_svr:
-	mfspr	r3, SVR
+	mfspr	r3,SVR
 	blr
 
 	.globl wr_tcr
 wr_tcr:
-	mtspr	TCR, r3
+	mtspr	TCR,r3
 	blr
 
 /*------------------------------------------------------------------------------- */
@@ -913,16 +835,16 @@ ppcSync:
  */
 	.globl	relocate_code
 relocate_code:
-	mr	r1,  r3		/* Set new stack pointer		*/
-	mr	r9,  r4		/* Save copy of Init Data pointer	*/
-	mr	r10, r5		/* Save copy of Destination Address	*/
+	mr	r1,r3		/* Set new stack pointer		*/
+	mr	r9,r4		/* Save copy of Init Data pointer	*/
+	mr	r10,r5		/* Save copy of Destination Address	*/
 
-	mr	r3,  r5				/* Destination Address	*/
-	lis	r4, CFG_MONITOR_BASE@h		/* Source      Address	*/
-	ori	r4, r4, CFG_MONITOR_BASE@l
+	mr	r3,r5				/* Destination Address	*/
+	lis	r4,CFG_MONITOR_BASE@h		/* Source      Address	*/
+	ori	r4,r4,CFG_MONITOR_BASE@l
 	lwz	r5,GOT(__init_end)
 	sub	r5,r5,r4
-	li	r6, CFG_CACHELINE_SIZE		/* Cache Line Size	*/
+	li	r6,CFG_CACHELINE_SIZE		/* Cache Line Size	*/
 
 	/*
 	 * Fix GOT pointer:
@@ -931,12 +853,12 @@ relocate_code:
 	 *
 	 * Offset:
 	 */
-	sub	r15, r10, r4
+	sub	r15,r10,r4
 
 	/* First our own GOT */
-	add	r14, r14, r15
+	add	r14,r14,r15
 	/* the the one used by the C code */
-	add	r30, r30, r15
+	add	r30,r30,r15
 
 	/*
 	 * Now relocate code
@@ -997,10 +919,10 @@ relocate_code:
  * initialization, now running from RAM.
  */
 
-	addi	r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
+	addi	r0,r10,in_ram - _start + _START_OFFSET
 	mtlr	r0
 	blr				/* NEVER RETURNS! */
-
+	.globl	in_ram
 in_ram:
 
 	/*
@@ -1044,19 +966,19 @@ clear_bss:
 	lwz	r3,GOT(__bss_start)
 	lwz	r4,GOT(_end)
 
-	cmplw	0, r3, r4
+	cmplw	0,r3,r4
 	beq	6f
 
-	li	r0, 0
+	li	r0,0
 5:
-	stw	r0, 0(r3)
-	addi	r3, r3, 4
-	cmplw	0, r3, r4
+	stw	r0,0(r3)
+	addi	r3,r3,4
+	cmplw	0,r3,r4
 	bne	5b
 6:
 
-	mr	r3, r9		/* Init Data pointer		*/
-	mr	r4, r10		/* Destination Address		*/
+	mr	r3,r9		/* Init Data pointer		*/
+	mr	r4,r10		/* Destination Address		*/
 	bl	board_init_r
 
 	/*
@@ -1067,52 +989,54 @@ clear_bss:
 	 */
 	.globl	trap_init
 trap_init:
-	lwz	r7, GOT(_start)
-	lwz	r8, GOT(_end_of_vectors)
+	lwz	r7,GOT(_start_of_vectors)
+	lwz	r8,GOT(_end_of_vectors)
 
-	li	r9, 0x100		/* reset vector always at 0x100 */
+	li	r9,0x100		/* reset vector always at 0x100 */
 
-	cmplw	0, r7, r8
+	cmplw	0,r7,r8
 	bgelr				/* return if r7>=r8 - just in case */
 
 	mflr	r4			/* save link register		*/
 1:
-	lwz	r0, 0(r7)
-	stw	r0, 0(r9)
-	addi	r7, r7, 4
-	addi	r9, r9, 4
-	cmplw	0, r7, r8
+	lwz	r0,0(r7)
+	stw	r0,0(r9)
+	addi	r7,r7,4
+	addi	r9,r9,4
+	cmplw	0,r7,r8
 	bne	1b
 
 	/*
 	 * relocate `hdlr' and `int_return' entries
 	 */
-	li	r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
+	li	r7,.L_CriticalInput - _start + _START_OFFSET
 	bl	trap_reloc
-	li	r7, .L_DataStorage - _start + EXC_OFF_SYS_RESET
+	li	r7,.L_MachineCheck - _start + _START_OFFSET
 	bl	trap_reloc
-	li	r7, .L_InstStorage - _start + EXC_OFF_SYS_RESET
+	li	r7,.L_DataStorage - _start + _START_OFFSET
 	bl	trap_reloc
-	li	r7, .L_ExtInterrupt - _start + EXC_OFF_SYS_RESET
+	li	r7,.L_InstStorage - _start + _START_OFFSET
 	bl	trap_reloc
-	li	r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
+	li	r7,.L_ExtInterrupt - _start + _START_OFFSET
 	bl	trap_reloc
-	li	r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
+	li	r7,.L_Alignment - _start + _START_OFFSET
 	bl	trap_reloc
-	li	r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
+	li	r7,.L_ProgramCheck - _start + _START_OFFSET
 	bl	trap_reloc
-	li	r7, .L_Decrementer - _start + EXC_OFF_SYS_RESET
+	li	r7,.L_FPUnavailable - _start + _START_OFFSET
 	bl	trap_reloc
-	li	r7, .L_IntervalTimer - _start + EXC_OFF_SYS_RESET
-	li	r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
+	li	r7,.L_Decrementer - _start + _START_OFFSET
+	bl	trap_reloc
+	li	r7,.L_IntervalTimer - _start + _START_OFFSET
+	li	r8,_end_of_vectors - _start + _START_OFFSET
 2:
 	bl	trap_reloc
-	addi	r7, r7, 0x100		/* next exception vector	*/
-	cmplw	0, r7, r8
+	addi	r7,r7,0x100		/* next exception vector	*/
+	cmplw	0,r7,r8
 	blt	2b
 
 	lis	r7,0x0
-	mtspr	IVPR, r7
+	mtspr	IVPR,r7
 
 	mtlr	r4			/* restore link register	*/
 	blr
@@ -1121,13 +1045,13 @@ trap_init:
 	 * Function: relocate entries for one exception vector
 	 */
 trap_reloc:
-	lwz	r0, 0(r7)		/* hdlr ...			*/
-	add	r0, r0, r3		/*  ... += dest_addr		*/
-	stw	r0, 0(r7)
+	lwz	r0,0(r7)		/* hdlr ...			*/
+	add	r0,r0,r3		/*  ... += dest_addr		*/
+	stw	r0,0(r7)
 
-	lwz	r0, 4(r7)		/* int_return ...		*/
-	add	r0, r0, r3		/*  ... += dest_addr		*/
-	stw	r0, 4(r7)
+	lwz	r0,4(r7)		/* int_return ...		*/
+	add	r0,r0,r3		/*  ... += dest_addr		*/
+	stw	r0,4(r7)
 
 	blr
 
@@ -1135,13 +1059,13 @@ trap_reloc:
 .globl unlock_ram_in_cache
 unlock_ram_in_cache:
 	/* invalidate the INIT_RAM section */
-	lis	r3, (CFG_INIT_RAM_ADDR & ~31)@h
-	ori	r3, r3, (CFG_INIT_RAM_ADDR & ~31)@l
-	li	r2,512
-	mtctr	r2
-1:	icbi	r0, r3
-	dcbi	r0, r3
-	addi	r3, r3, 32
+	lis	r3,(CFG_INIT_RAM_ADDR & ~31)@h
+	ori	r3,r3,(CFG_INIT_RAM_ADDR & ~31)@l
+	li	r4,512
+	mtctr	r4
+1:	icbi	r0,r3
+	dcbi	r0,r3
+	addi	r3,r3,32
 	bdnz	1b
 	sync			/* Wait for all icbi to complete on bus */
 	isync
diff --git a/cpu/mpc85xx/traps.c b/cpu/mpc85xx/traps.c
index 9cd621c3a..efc80c7ae 100644
--- a/cpu/mpc85xx/traps.c
+++ b/cpu/mpc85xx/traps.c
@@ -1,6 +1,7 @@
 /*
  * linux/arch/ppc/kernel/traps.c
  *
+ * Copyright 2007 Freescale Semiconductor.
  * Copyright (C) 2003 Motorola
  * Modified by Xianghua Xiao(x.xiao@motorola.com)
  *
@@ -145,10 +146,13 @@ CritcalInputException(struct pt_regs *regs)
 	panic("Critical Input Exception");
 }
 
+int machinecheck_count = 0;
+int machinecheck_error = 0;
 void
 MachineCheckException(struct pt_regs *regs)
 {
 	unsigned long fixup;
+	unsigned int mcsr, mcsrr0, mcsrr1, mcar;
 
 	/* Probing PCI using config cycles cause this exception
 	 * when a device is not present.  Catch it and return to
@@ -159,34 +163,62 @@ MachineCheckException(struct pt_regs *regs)
 		return;
 	}
 
+	mcsrr0 = mfspr(SPRN_MCSRR0);
+	mcsrr1 = mfspr(SPRN_MCSRR1);
+	mcsr = mfspr(SPRN_MCSR);
+	mcar = mfspr(SPRN_MCAR);
+
+	machinecheck_count++;
+	machinecheck_error=1;
+
 #if defined(CONFIG_CMD_KGDB)
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
 		return;
 #endif
 
 	printf("Machine check in kernel mode.\n");
-	printf("Caused by (from msr): ");
-	printf("regs %p ",regs);
-	switch( regs->msr & 0x000F0000) {
-	case (0x80000000>>12):
-		printf("Machine check signal - probably due to mm fault\n"
-		       "with mmu off\n");
-		break;
-	case (0x80000000>>13):
-		printf("Transfer error ack signal\n");
-		break;
-	case (0x80000000>>14):
-		printf("Data parity signal\n");
-		break;
-	case (0x80000000>>15):
-		printf("Address parity signal\n");
-		break;
-	default:
-		printf("Unknown values in msr\n");
-	}
+	printf("Caused by (from mcsr): ");
+	printf("mcsr = 0x%08x\n", mcsr);
+	if (mcsr & 0x80000000)
+		printf("Machine check input pin\n");
+	if (mcsr & 0x40000000)
+		printf("Instruction cache parity error\n");
+	if (mcsr & 0x20000000)
+		printf("Data cache push parity error\n");
+	if (mcsr & 0x10000000)
+		printf("Data cache parity error\n");
+	if (mcsr & 0x00000080)
+		printf("Bus instruction address error\n");
+	if (mcsr & 0x00000040)
+		printf("Bus Read address error\n");
+	if (mcsr & 0x00000020)
+		printf("Bus Write address error\n");
+	if (mcsr & 0x00000010)
+		printf("Bus Instruction data bus error\n");
+	if (mcsr & 0x00000008)
+		printf("Bus Read data bus error\n");
+	if (mcsr & 0x00000004)
+		printf("Bus Write bus error\n");
+	if (mcsr & 0x00000002)
+		printf("Bus Instruction parity error\n");
+	if (mcsr & 0x00000001)
+		printf("Bus Read parity error\n");
+
 	show_regs(regs);
+	printf("MCSR=0x%08x \tMCSRR0=0x%08x \nMCSRR1=0x%08x \tMCAR=0x%08x\n",
+	       mcsr, mcsrr0, mcsrr1, mcar);
 	print_backtrace((unsigned long *)regs->gpr[1]);
-	panic("machine check");
+	if (machinecheck_count > 10) {
+		panic("machine check count too high\n");
+	}
+
+	if (machinecheck_count > 1) {
+		regs->nip += 4; /* skip offending instruction */
+		printf("Skipping current instr, Returning to 0x%08x\n",
+		       regs->nip);
+	} else {
+		printf("Returning back to 0x%08x\n",regs->nip);
+	}
 }
 
 void
@@ -253,6 +285,33 @@ UnknownException(struct pt_regs *regs)
 	       regs->nip, regs->msr, regs->trap);
 	_exception(0, regs);
 }
+void
+ExtIntException(struct pt_regs *regs)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMR;
+	volatile ccsr_pic_t *pic = &immap->im_pic;
+	uint vect;
+
+#if defined(CONFIG_CMD_KGDB)
+	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
+		return;
+#endif
+
+	printf("External Interrupt Exception at PC: %lx, SR: %lx, vector=%lx",
+	       regs->nip, regs->msr, regs->trap);
+	vect = pic->iack0;
+	printf(" irq IACK0@%05x=%d\n",&pic->iack0,vect);
+	show_regs(regs);
+	print_backtrace((unsigned long *)regs->gpr[1]);
+	machinecheck_count++;
+#ifdef EXTINT_NOSKIP
+	printf("Returning back to 0x%08x\n",regs->nip);
+#else
+	regs->nip += 4; /* skip offending instruction */
+	printf("Skipping current instr, Returning to 0x%08x\n",regs->nip);
+#endif
+
+}
 
 void
 DebugException(struct pt_regs *regs)
diff --git a/doc/README.mpc8544ds b/doc/README.mpc8544ds
new file mode 100644
index 000000000..14c7f765e
--- /dev/null
+++ b/doc/README.mpc8544ds
@@ -0,0 +1,122 @@
+Overview
+--------
+The MPC8544DS system is similar to the 85xx CDS systems such
+as the MPC8548CDS due to the similar E500 core.  However, it
+is placed on the same board as the 8641 HPCN system.
+
+
+Flash Banks
+-----------
+Like the 85xx CDS systems, the 8544 DS board has two flash banks.
+They are both present on boot, but there locations can be swapped
+using the dip-switch SW10, bit 2.
+
+However, unlike the CDS systems, but similar to the 8641 HPCN
+board, a runtime reset through the FPGA can also affect a swap
+on the flash bank mappings for the next reset cycle.
+
+Irrespective of the switch SW10[2], booting is always from the
+boot bank at 0xfff8_0000.
+
+
+Memory Map
+----------
+
+0xff80_0000 - 0xffbf_ffff	Alernate bank		4MB
+0xffc0_0000 - 0xffff_ffff	Boot bank		4MB
+
+0xffb8_0000			Alternate image start	512KB
+0xfff8_0000			Boot image start	512KB
+
+
+Flashing Images
+---------------
+
+For example, to place a new image in the alternate flash bank
+and then reset with that new image temporarily, use this:
+
+    tftp 1000000 u-boot.bin.8544ds
+    erase ffb80000 ffbfffff
+    cp.b 1000000 ffb80000 80000
+    pixis_reset altbank
+
+
+To overwrite the image in the boot flash bank:
+
+    tftp 1000000 u-boot.bin.8544ds
+    protect off all
+    erase fff80000 ffffffff
+    cp.b 1000000 fff80000 80000
+
+Other example U-Boot image and flash manipulations examples
+can be found in the README.mpc85xxcds file as well.
+
+
+The pixis_reset command
+-----------------------
+A new command, "pixis_reset", is introduced to reset mpc8641hpcn board
+using the FPGA sequencer.  When the board restarts, it has the option
+of using either the current or alternate flash bank as the boot
+image, with or without the watchdog timer enabled, and finally with
+or without frequency changes.
+
+Usage is;
+
+	pixis_reset
+	pixis_reset altbank
+	pixis_reset altbank wd
+	pixis_reset altbank cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>
+	pixis_reset cf <SYSCLK freq> <COREPLL ratio> <MPXPLL ratio>
+
+Examples;
+
+	/* reset to current bank, like "reset" command */
+	pixis_reset
+
+	/* reset board but use the to alternate flash bank */
+	pixis_reset altbank
+
+	/* reset board, use alternate flash bank with watchdog timer enabled*/
+	pixis_reset altbank wd
+
+	/* reset board to alternate bank with frequency changed.
+	 * 40 is SYSCLK, 2.5 is COREPLL ratio, 10 is MPXPLL ratio
+	 */
+	pixis-reset altbank cf 40 2.5 10
+
+Valid clock choices are in the 8641 Reference Manuals.
+
+
+Using the Device Tree Source File
+---------------------------------
+To create the DTB (Device Tree Binary) image file,
+use a command similar to this:
+
+    dtc -b 0 -f -I dts -O dtb mpc8544ds.dts > mpc8544ds.dtb
+
+Likely, that .dts file will come from here;
+
+    linux-2.6/arch/powerpc/boot/dts/mpc8544ds.dts
+
+After placing the DTB file in your TFTP disk area, 
+you can download that dtb file using a command like:
+
+    tftp 900000 mpc8544ds.dtb
+
+Burn it to flash if you want.
+
+
+Booting Linux
+-------------
+
+Place a linux uImage in the TFTP disk area too.
+
+    tftp 1000000 uImage.8544
+    tftp 900000 mpc8544ds.dtb
+    bootm 1000000 - 900000
+
+Watch your ethact, netdev and bootargs U-Boot environment variables.
+You may want to do something like this too:
+
+    setenv ethact eTSEC3
+    setenv netdev eth1
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index c416a67c8..89a727982 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -391,17 +391,17 @@ static int uec_set_mac_if_mode(uec_private_t *uec, enet_interface_e if_mode)
 	return 0;
 }
 
-static int init_mii_management_configuration(uec_t *uec_regs)
+static int init_mii_management_configuration(uec_mii_t *uec_mii_regs)
 {
 	uint		timeout = 0x1000;
 	u32		miimcfg = 0;
 
-	miimcfg = in_be32(&uec_regs->miimcfg);
+	miimcfg = in_be32(&uec_mii_regs->miimcfg);
 	miimcfg |= MIIMCFG_MNGMNT_CLC_DIV_INIT_VALUE;
-	out_be32(&uec_regs->miimcfg, miimcfg);
+	out_be32(&uec_mii_regs->miimcfg, miimcfg);
 
 	/* Wait until the bus is free */
-	while ((in_be32(&uec_regs->miimcfg) & MIIMIND_BUSY) && timeout--);
+	while ((in_be32(&uec_mii_regs->miimcfg) & MIIMIND_BUSY) && timeout--);
 	if (timeout <= 0) {
 		printf("%s: The MII Bus is stuck!", __FUNCTION__);
 		return -ETIMEDOUT;
@@ -413,13 +413,13 @@ static int init_mii_management_configuration(uec_t *uec_regs)
 static int init_phy(struct eth_device *dev)
 {
 	uec_private_t		*uec;
-	uec_t			*uec_regs;
+	uec_mii_t		*umii_regs;
 	struct uec_mii_info	*mii_info;
 	struct phy_info		*curphy;
 	int			err;
 
 	uec = (uec_private_t *)dev->priv;
-	uec_regs = uec->uec_regs;
+	umii_regs = uec->uec_mii_regs;
 
 	uec->oldlink = 0;
 	uec->oldspeed = 0;
@@ -451,19 +451,19 @@ static int init_phy(struct eth_device *dev)
 	mii_info->mii_id = uec->uec_info->phy_address;
 	mii_info->dev = dev;
 
-	mii_info->mdio_read = &read_phy_reg;
-	mii_info->mdio_write = &write_phy_reg;
+	mii_info->mdio_read = &uec_read_phy_reg;
+	mii_info->mdio_write = &uec_write_phy_reg;
 
 	uec->mii_info = mii_info;
 
-	if (init_mii_management_configuration(uec_regs)) {
+	if (init_mii_management_configuration(umii_regs)) {
 		printf("%s: The MII Bus is stuck!", dev->name);
 		err = -1;
 		goto bus_fail;
 	}
 
 	/* get info for this PHY */
-	curphy = get_phy_info(uec->mii_info);
+	curphy = uec_get_phy_info(uec->mii_info);
 	if (!curphy) {
 		printf("%s: No PHY found", dev->name);
 		err = -1;
@@ -989,6 +989,13 @@ static int uec_startup(uec_private_t *uec)
 	/* Setup MAC interface mode */
 	uec_set_mac_if_mode(uec, uec_info->enet_interface);
 
+	/* Setup MII management base */
+#ifndef CONFIG_eTSEC_MDIO_BUS
+	uec->uec_mii_regs = (uec_mii_t *)(&uec_regs->miimcfg);
+#else
+	uec->uec_mii_regs = (uec_mii_t *) CONFIG_MIIM_ADDRESS;
+#endif
+
 	/* Setup MII master clock source */
 	qe_set_mii_clk_src(uec_info->uf_info.ucc_num);
 
diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h
index 04950264b..c384055ce 100644
--- a/drivers/qe/uec.h
+++ b/drivers/qe/uec.h
@@ -675,6 +675,7 @@ typedef struct uec_private {
 	ucc_fast_private_t		*uccf;
 	struct eth_device		*dev;
 	uec_t				*uec_regs;
+	uec_mii_t			*uec_mii_regs;
 	/* enet init command parameter */
 	uec_init_cmd_pram_t		*p_init_enet_param;
 	u32				init_enet_param_offset;
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index 76fd38896..ca6faa6ef 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -60,14 +60,14 @@ void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val);
 /* Write value to the PHY for this device to the register at regnum, */
 /* waiting until the write is done before it returns.  All PHY */
 /* configuration has to be done through the TSEC1 MIIM regs */
-void write_phy_reg (struct eth_device *dev, int mii_id, int regnum, int value)
+void uec_write_phy_reg (struct eth_device *dev, int mii_id, int regnum, int value)
 {
 	uec_private_t *ugeth = (uec_private_t *) dev->priv;
-	uec_t *ug_regs;
+	uec_mii_t *ug_regs;
 	enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum;
 	u32 tmp_reg;
 
-	ug_regs = ugeth->uec_regs;
+	ug_regs = ugeth->uec_mii_regs;
 
 	/* Stop the MII management read cycle */
 	out_be32 (&ug_regs->miimcom, 0);
@@ -87,15 +87,15 @@ void write_phy_reg (struct eth_device *dev, int mii_id, int regnum, int value)
 /* Reads from register regnum in the PHY for device dev, */
 /* returning the value.  Clears miimcom first.  All PHY */
 /* configuration has to be done through the TSEC1 MIIM regs */
-int read_phy_reg (struct eth_device *dev, int mii_id, int regnum)
+int uec_read_phy_reg (struct eth_device *dev, int mii_id, int regnum)
 {
 	uec_private_t *ugeth = (uec_private_t *) dev->priv;
-	uec_t *ug_regs;
+	uec_mii_t *ug_regs;
 	enet_tbi_mii_reg_e mii_reg = (enet_tbi_mii_reg_e) regnum;
 	u32 tmp_reg;
 	u16 value;
 
-	ug_regs = ugeth->uec_regs;
+	ug_regs = ugeth->uec_mii_regs;
 
 	/* Setting up the MII Mangement Address Register */
 	tmp_reg = ((u32) mii_id << MIIMADD_PHY_ADDRESS_SHIFT) | mii_reg;
@@ -521,7 +521,7 @@ void phy_write (struct uec_mii_info *mii_info, u16 regnum, u16 val)
 /* Use the PHY ID registers to determine what type of PHY is attached
  * to device dev.  return a struct phy_info structure describing that PHY
  */
-struct phy_info *get_phy_info (struct uec_mii_info *mii_info)
+struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info)
 {
 	u16 phy_reg;
 	u32 phy_ID;
diff --git a/drivers/qe/uec_phy.h b/drivers/qe/uec_phy.h
index 9bd926ddd..e59a940e0 100644
--- a/drivers/qe/uec_phy.h
+++ b/drivers/qe/uec_phy.h
@@ -249,10 +249,10 @@ struct phy_info {
 	void (*close) (struct uec_mii_info * mii_info);
 };
 
-struct phy_info *get_phy_info (struct uec_mii_info *mii_info);
-void write_phy_reg (struct eth_device *dev, int mii_id, int regnum,
+struct phy_info *uec_get_phy_info (struct uec_mii_info *mii_info);
+void uec_write_phy_reg (struct eth_device *dev, int mii_id, int regnum,
 		    int value);
-int read_phy_reg (struct eth_device *dev, int mii_id, int regnum);
+int uec_read_phy_reg (struct eth_device *dev, int mii_id, int regnum);
 void mii_clear_phy_interrupt (struct uec_mii_info *mii_info);
 void mii_configure_phy_interrupt (struct uec_mii_info *mii_info,
 				  u32 interrupts);
diff --git a/include/asm-ppc/global_data.h b/include/asm-ppc/global_data.h
index bbaeb3f57..1f1583a92 100644
--- a/include/asm-ppc/global_data.h
+++ b/include/asm-ppc/global_data.h
@@ -71,16 +71,16 @@ typedef	struct	global_data {
 	u32 lclk_clk;
 	u32 ddr_clk;
 	u32 pci_clk;
+#if defined(CONFIG_MPC8360)
+	u32  ddr_sec_clk;
+#endif /* CONFIG_MPC8360 */
+#endif
 #if defined(CONFIG_QE)
 	u32 qe_clk;
 	u32 brg_clk;
 	uint mp_alloc_base;
 	uint mp_alloc_top;
 #endif /* CONFIG_QE */
-#if defined (CONFIG_MPC8360)
-	u32  ddr_sec_clk;
-#endif /* CONFIG_MPC8360 */
-#endif
 #if defined(CONFIG_MPC5xxx)
 	unsigned long	ipb_clk;
 	unsigned long	pci_clk;
diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h
index e002d2838..3d4816f3a 100644
--- a/include/asm-ppc/immap_85xx.h
+++ b/include/asm-ppc/immap_85xx.h
@@ -1,6 +1,8 @@
 /*
  * MPC85xx Internal Memory Map
  *
+ * Copyright 2007 Freescale Semiconductor.
+ *
  * Copyright(c) 2002,2003 Motorola Inc.
  * Xianghua Xiao (x.xiao@motorola.com)
  *
@@ -1520,14 +1522,39 @@ typedef struct ccsr_rio {
 	char	res58[60176];
 } ccsr_rio_t;
 
+/* Quick Engine Block Pin Muxing Registers (0xe_0100 - 0xe_01bf) */
+typedef struct par_io {
+	uint	cpodr;		/* 0x100 */
+	uint	cpdat;		/* 0x104 */
+	uint	cpdir1;		/* 0x108 */
+	uint	cpdir2;		/* 0x10c */
+	uint	cppar1;		/* 0x110 */
+	uint	cppar2;		/* 0x114 */
+	char	res[8];
+}par_io_t;
+
 /*
  * Global Utilities Register Block(0xe_0000-0xf_ffff)
  */
 typedef struct ccsr_gur {
 	uint	porpllsr;	/* 0xe0000 - POR PLL ratio status register */
 	uint	porbmsr;	/* 0xe0004 - POR boot mode status register */
+#define MPC85xx_PORBMSR_HA 		0x00070000
 	uint	porimpscr;	/* 0xe0008 - POR I/O impedance status and control register */
 	uint	pordevsr;	/* 0xe000c - POR I/O device status regsiter */
+#define MPC85xx_PORDEVSR_SGMII1_DIS	0x20000000
+#define MPC85xx_PORDEVSR_SGMII2_DIS	0x10000000
+#define MPC85xx_PORDEVSR_SGMII3_DIS	0x08000000
+#define MPC85xx_PORDEVSR_SGMII4_DIS	0x04000000
+#define MPC85xx_PORDEVSR_IO_SEL		0x00380000
+#define MPC85xx_PORDEVSR_PCI2_ARB 	0x00040000
+#define MPC85xx_PORDEVSR_PCI1_ARB 	0x00020000
+#define MPC85xx_PORDEVSR_PCI1_PCI32 	0x00010000
+#define MPC85xx_PORDEVSR_PCI1_SPD 	0x00008000
+#define MPC85xx_PORDEVSR_PCI2_SPD 	0x00004000
+#define MPC85xx_PORDEVSR_DRAM_RTYPE	0x00000060
+#define MPC85xx_PORDEVSR_RIO_CTLS 	0x00000008
+#define MPC85xx_PORDEVSR_RIO_DEV_ID	0x00000007
 	uint	pordbgmsr;	/* 0xe0010 - POR debug mode status register */
 	char	res1[12];
 	uint	gpporcr;	/* 0xe0020 - General-purpose POR configuration register */
@@ -1541,6 +1568,25 @@ typedef struct ccsr_gur {
 	uint	pmuxcr;		/* 0xe0060 - Alternate function signal multiplex control */
 	char	res6[12];
 	uint	devdisr;	/* 0xe0070 - Device disable control */
+#define MPC85xx_DEVDISR_PCI1		0x80000000
+#define MPC85xx_DEVDISR_PCI2		0x40000000
+#define MPC85xx_DEVDISR_PCIE		0x20000000
+#define MPC85xx_DEVDISR_LBC		0x08000000
+#define MPC85xx_DEVDISR_PCIE2		0x04000000
+#define MPC85xx_DEVDISR_PCIE3		0x02000000
+#define MPC85xx_DEVDISR_SEC		0x01000000
+#define MPC85xx_DEVDISR_SRIO		0x00080000
+#define MPC85xx_DEVDISR_RMSG		0x00040000
+#define MPC85xx_DEVDISR_DDR 		0x00010000
+#define MPC85xx_DEVDISR_CPU 		0x00008000
+#define MPC85xx_DEVDISR_TB 		0x00004000
+#define MPC85xx_DEVDISR_DMA		0x00000400
+#define MPC85xx_DEVDISR_TSEC1		0x00000080
+#define MPC85xx_DEVDISR_TSEC2		0x00000040
+#define MPC85xx_DEVDISR_TSEC3		0x00000020
+#define MPC85xx_DEVDISR_TSEC4		0x00000010
+#define MPC85xx_DEVDISR_I2C		0x00000004
+#define MPC85xx_DEVDISR_DUART		0x00000002
 	char	res7[12];
 	uint	powmgtcsr;	/* 0xe0080 - Power management status and control register */
 	char	res8[12];
@@ -1550,7 +1596,13 @@ typedef struct ccsr_gur {
 	uint	svr;		/* 0xe00a4 - System version register */
 	char	res10a[8];
 	uint	rstcr;		/* 0xe00b0 - Reset control register */
+#ifdef MPC8568
+	char	res10b[76];
+	par_io_t qe_par_io[7];  /* 0xe0100 - 0xe01bf */
+	char	res10c[3136];
+#else
 	char	res10b[3404];
+#endif
 	uint	clkocr;		/* 0xe0e00 - Clock out select register */
 	char	res11[12];
 	uint	ddrdllcr;	/* 0xe0e10 - DDR DLL control register */
@@ -1562,7 +1614,7 @@ typedef struct ccsr_gur {
 	uint	ddrioovcr;	/* 0xe0f24 - DDR IO Override Control */
 	uint	res14;		/* 0xe0f28 */
 	uint	tsec34ioovcr;	/* 0xe0f2c - eTSEC 3/4 IO override control */
-	char	res15[61651];
+	char	res15[61648];	/* 0xe0f30 to 0xefffff */
 } ccsr_gur_t;
 
 #define PORDEVSR_PCI	(0x00800000)	/* PCI Mode */
diff --git a/include/asm-ppc/immap_qe.h b/include/asm-ppc/immap_qe.h
index 950b9497f..a16a6d3fc 100644
--- a/include/asm-ppc/immap_qe.h
+++ b/include/asm-ppc/immap_qe.h
@@ -281,6 +281,17 @@ typedef struct ucc_slow {
 	u8 res4[0x200 - 0x091];
 } __attribute__ ((packed)) ucc_slow_t;
 
+typedef struct ucc_mii_mng {
+	u32 miimcfg;		/* MII management configuration reg    */
+	u32 miimcom;		/* MII management command reg          */
+	u32 miimadd;		/* MII management address reg          */
+	u32 miimcon;		/* MII management control reg          */
+	u32 miimstat;		/* MII management status reg           */
+	u32 miimind;		/* MII management indication reg       */
+	u32 ifctl;		/* interface control reg               */
+	u32 ifstat;		/* interface statux reg                */
+} __attribute__ ((packed))uec_mii_t;
+
 typedef struct ucc_ethernet {
 	u32 maccfg1;		/* mac configuration reg. 1            */
 	u32 maccfg2;		/* mac configuration reg. 2            */
@@ -540,14 +551,21 @@ typedef struct qe_immap {
 	u8 res14[0x300];
 	u8 res15[0x3A00];
 	u8 res16[0x8000];	/* 0x108000 -  0x110000 */
+#if defined(CONFIG_MPC8568)
+	u8 muram[0x10000];	/* 0x1_0000 -  0x2_0000 Multi-user RAM */
+	u8 res17[0x20000];	/* 0x2_0000 -  0x4_0000 */
+#else
 	u8 muram[0xC000];	/* 0x110000 -  0x11C000 Multi-user RAM */
 	u8 res17[0x24000];	/* 0x11C000 -  0x140000 */
 	u8 res18[0xC0000];	/* 0x140000 -  0x200000 */
+#endif
 } __attribute__ ((packed)) qe_map_t;
 
 extern qe_map_t *qe_immr;
 
-#if defined(CONFIG_MPC8360)
+#if defined(CONFIG_MPC8568)
+#define QE_MURAM_SIZE		0x10000UL
+#elif defined(CONFIG_MPC8360)
 #define QE_MURAM_SIZE		0xc000UL
 #elif defined(CONFIG_MPC832X)
 #define QE_MURAM_SIZE		0x4000UL
diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h
index 9be5a279e..0a160e251 100644
--- a/include/asm-ppc/processor.h
+++ b/include/asm-ppc/processor.h
@@ -217,12 +217,14 @@
 #define   HID0_DPM	(1<<20)
 #define   HID0_ICE	(1<<HID0_ICE_SHIFT)	/* Instruction Cache Enable */
 #define   HID0_DCE	(1<<HID0_DCE_SHIFT)	/* Data Cache Enable */
+#define   HID0_TBEN	(1<<14)		/* Time Base Enable */
 #define   HID0_ILOCK	(1<<13)		/* Instruction Cache Lock */
 #define   HID0_DLOCK	(1<<HID0_DLOCK_SHIFT)	/* Data Cache Lock */
 #define   HID0_ICFI	(1<<11)		/* Instr. Cache Flash Invalidate */
 #define   HID0_DCFI	(1<<10)		/* Data Cache Flash Invalidate */
 #define   HID0_DCI	HID0_DCFI
 #define   HID0_SPD	(1<<9)		/* Speculative disable */
+#define   HID0_ENMAS7	(1<<7)		/* Enable MAS7 Update for 36-bit phys */
 #define   HID0_SGE	(1<<7)		/* Store Gathering Enable */
 #define   HID0_SIED	HID_SGE		/* Serial Instr. Execution [Disable] */
 #define   HID0_DCFA	(1<<6)		/* Data Cache Flush Assist */
@@ -450,6 +452,7 @@
 #define SPRN_PID1       0x279   /* Process ID Register 1 */
 #define SPRN_PID2       0x27a   /* Process ID Register 2 */
 #define SPRN_MCSR	0x23c	/* Machine Check Syndrome register */
+#define SPRN_MCAR	0x23d	/* Machine Check Address register */
 #ifdef CONFIG_440
 #define MCSR_MCS	0x80000000	/* Machine Check Summary */
 #define MCSR_IB		0x40000000	/* Instruction PLB Error */
diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h
index 50d3b6b87..232f1716b 100644
--- a/include/configs/MPC8541CDS.h
+++ b/include/configs/MPC8541CDS.h
@@ -350,6 +350,13 @@ extern unsigned long get_clock_freq(void);
 #define CFG_PCI2_IO_PHYS	0xe2100000
 #define CFG_PCI2_IO_SIZE	0x100000	/* 1M */
 
+#ifdef CONFIG_LEGACY
+#define BRIDGE_ID 17
+#define VIA_ID 2
+#else
+#define BRIDGE_ID 28
+#define VIA_ID 4
+#endif
 
 #if defined(CONFIG_PCI)
 
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index d0f94a3e2..32934e155 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -34,14 +34,14 @@
 #define CONFIG_MPC8544		1
 #define CONFIG_MPC8544DS	1
 
-#undef CONFIG_PCI			/* Enable PCI/PCIE */
-#undef CONFIG_PCI1			/* PCI controller 1 */
-#undef CONFIG_PCIE1			/* PCIE controler 1 (slot 1) */
-#undef CONFIG_PCIE2			/* PCIE controler 2 (slot 2) */
-#undef CONFIG_PCIE3			/* PCIE controler 3 (ULI bridge) */
-#undef CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
+#define CONFIG_PCI		1	/* Enable PCI/PCIE */
+#define CONFIG_PCI1		1	/* PCI controller 1 */
+#define CONFIG_PCIE1		1	/* PCIE controler 1 (slot 1) */
+#define CONFIG_PCIE2		1	/* PCIE controler 2 (slot 2) */
+#define CONFIG_PCIE3		1	/* PCIE controler 3 (ULI bridge) */
+#define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
 
-#define CONFIG_TSEC_ENET 		/* tsec ethernet support */
+#define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup */
 #undef CONFIG_DDR_DLL
@@ -52,6 +52,7 @@
 #define CONFIG_MEM_INIT_VALUE		0xDeadBeef
 
 #define CONFIG_DDR_ECC_CMD
+#define CONFIG_INTERRUPTS		/* enable pci, srio, ddr interrupts */
 
 /*
  * When initializing flash, if we cannot find the manufacturer ID,
@@ -70,7 +71,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * These can be toggled for performance analysis, otherwise use default.
  */
-#define CONFIG_L2_CACHE			/* toggle L2 cache 	*/
+#define CONFIG_L2_CACHE			/* toggle L2 cache */
 #define CONFIG_BTB			/* toggle branch predition */
 #define CONFIG_ADDR_STREAMING		/* toggle addr streaming */
 #define CONFIG_CLEAR_LAW0		/* Clear LAW0 in cpu_init_r */
@@ -86,13 +87,13 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CFG_MEMTEST_START	0x00200000	/* memtest works on */
 #define CFG_MEMTEST_END		0x00400000
 #define CFG_ALT_MEMTEST
-#define CONFIG_PANIC_HANG 	/* do not reset board on panic */
+#define CONFIG_PANIC_HANG	/* do not reset board on panic */
 
 /*
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CFG_CCSRBAR_DEFAULT 	0xff700000	/* CCSRBAR Default */
+#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
 #define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
 #define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
 
@@ -344,7 +345,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SATA_ULI5288
 #define CFG_SCSI_MAX_SCSI_ID	4
 #define CFG_SCSI_MAX_LUN	1
-#define CFG_SCSI_MAX_DEVICE 	(CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN)
+#define CFG_SCSI_MAX_DEVICE	(CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN)
 #define CFG_SCSI_MAXDEVICE	CFG_SCSI_MAX_DEVICE
 #endif /* SCSCI */
 
@@ -354,7 +355,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #if defined(CONFIG_TSEC_ENET)
 
 #ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI 	1
+#define CONFIG_NET_MULTI	1
 #endif
 
 #define CONFIG_MII		1	/* MII PHY management */
@@ -365,6 +366,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_TSEC3_NAME	"eTSEC3"
 #undef CONFIG_MPC85XX_FEC
 
+#define CONFIG_TSEC_TBI		1	/* enable internal TBI phy */
+#define CONFIG_SGMII_RISER
+#define TSEC1_SGMII_PHY_ADDR_OFFSET	0x1c	/* sgmii phy base */
+
 #define TSEC1_PHY_ADDR		0
 #define TSEC3_PHY_ADDR		1
 
@@ -374,7 +379,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_ETHPRIME		"eTSEC1"
 
 #define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
-
 #endif	/* CONFIG_TSEC_ENET */
 
 /*
@@ -392,7 +396,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
 
-
 /*
  * BOOTP options
  */
@@ -415,6 +418,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
     #define CONFIG_CMD_PCI
     #define CONFIG_CMD_BEDBUG
     #define CONFIG_CMD_NET
+    #define CONFIG_CMD_SCSI
+    #define CONFIG_CMD_EXT2
 #endif
 
 
@@ -441,10 +446,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20) 	/* Initial Memory map for Linux*/
+#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
 /* Cache Configuration */
-#define CFG_DCACHE_SIZE	32768
+#define CFG_DCACHE_SIZE		32768
 #define CFG_CACHELINE_SIZE	32
 #if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
@@ -482,7 +487,8 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #define CONFIG_HOSTNAME	8544ds_unknown
 #define CONFIG_ROOTPATH	/nfs/mpc85xx
-#define CONFIG_BOOTFILE	8544ds_tmt/uImage.uboot
+#define CONFIG_BOOTFILE	8544ds/uImage.uboot
+#define CONFIG_UBOOTPATH	8544ds/u-boot.bin	/* TFTP server */
 
 #define CONFIG_SERVERIP	192.168.0.1
 #define CONFIG_GATEWAYIP 192.168.0.1
@@ -491,7 +497,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_LOADADDR	1000000	/*default location for tftp and bootm*/
 
 #define CONFIG_BOOTDELAY 10	/* -1 disables auto-boot */
-#undef	CONFIG_BOOTARGS	/* the boot command will set bootargs*/
+#undef	CONFIG_BOOTARGS		/* the boot command will set bootargs*/
 
 #define CONFIG_BAUDRATE	115200
 
@@ -499,10 +505,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define PCIE_ENV \
  "pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \
 	"echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \
- "pcie1regs=setenv a e000a; run pciereg\0"	\
- "pcie2regs=setenv a e0009; run pciereg\0"	\
- "pcie3regs=setenv a e000b; run pciereg\0"	\
- "pcieerr=md ${a}020 1; md ${a}e00;"		\
+ "pcieerr=md ${a}020 1; md ${a}e00 e;"		\
 	"pci d.b $b.0 7 1; pci d.w $b.0 1e 1;"	\
 	"pci d.w $b.0 56 1;"			\
 	"pci d $b.0 104 1;pci d $b.0 110 1;pci d $b.0 130 1\0" \
@@ -511,12 +514,18 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 	"pci w $b.0 104 ffffffff; pci w $b.0 110 ffffffff;" \
 	"pci w $b.0 130 ffffffff\0" \
  "pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0"	\
- "pcie1err=setenv a e000a; run pcieerr\0"	\
- "pcie2err=setenv a e0009; run pcieerr\0"	\
- "pcie3err=setenv a e000b; run pcieerr\0"	\
- "pcie1errc=setenv a e000a; run pcieerrc\0"	\
- "pcie2errc=setenv a e0009; run pcieerrc\0"	\
- "pcie3errc=setenv a e000b; run pcieerrc\0"
+ "pcie1regs=setenv a e000a; run pciereg\0"	\
+ "pcie2regs=setenv a e0009; run pciereg\0"	\
+ "pcie3regs=setenv a e000b; run pciereg\0"	\
+ "pcie1cfg=setenv b 3; run pciecfg\0" \
+ "pcie2cfg=setenv b 5; run pciecfg\0" \
+ "pcie3cfg=setenv b 0; run pciecfg\0" \
+ "pcie1err=setenv a e000a; setenv b 3; run pcieerr\0"	\
+ "pcie2err=setenv a e0009; setenv b 5; run pcieerr\0"	\
+ "pcie3err=setenv a e000b; setenv b 0; run pcieerr\0"	\
+ "pcie1errc=setenv a e000a; setenv b 3; run pcieerrc\0"	\
+ "pcie2errc=setenv a e0009; setenv b 5; run pcieerrc\0"	\
+ "pcie3errc=setenv a e000b; setenv b 0; run pcieerrc\0"
 #else
 #define	PCIE_ENV ""
 #endif
@@ -524,14 +533,14 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #if defined(CONFIG_PCI1)
 #define PCI_ENV \
  "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \
-	"echo e;md ${a}e00 9\0" 		\
+	"echo e;md ${a}e00 9\0"			\
  "pci1regs=setenv a e0008; run pcireg\0"	\
  "pcierr=md ${a}e00 8; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \
 	"pci d.w $b.0 56 1\0"			\
- "pcierrc=mw ${a}e00 ffffffff; pci w.b $b.0 7 ff; pci w.w $b.0 1e ffff;" \
-	"pci w.w $b.0 56 ffff\0"		\
- "pci1err=setenv a e0008; run pcierr\0"		\
- "pci1errc=setenv a e0008; run pcierrc\0"
+ "pcierrc=mw ${a}e00 ffffffff; mw ${a}e0c 0; pci w.b $b.0 7 ff;" \
+	"pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff\0"		\
+ "pci1err=setenv a e0008; setenv b 7; run pcierr\0"		\
+ "pci1errc=setenv a e0008; setenv b 7; run pcierrc\0"
 #else
 #define	PCI_ENV ""
 #endif
@@ -551,25 +560,39 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define ENET_ENV ""
 #endif
 
-#define	CONFIG_EXTRA_ENV_SETTINGS		\
- "netdev=eth0\0"				\
+#define	CONFIG_EXTRA_ENV_SETTINGS				\
+ "netdev=eth0\0"						\
+ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"				\
+ "tftpflash=tftpboot $loadaddr $uboot; "			\
+	"protect off " MK_STR(TEXT_BASE) " +$filesize; "	\
+	"erase " MK_STR(TEXT_BASE) " +$filesize; "		\
+	"cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; "	\
+	"protect on " MK_STR(TEXT_BASE) " +$filesize; "		\
+	"cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0"	\
  "consoledev=ttyS0\0"				\
  "ramdiskaddr=2000000\0"			\
- "ramdiskfile=8544ds_tmt/ramdisk.uboot\0"	\
- "fdtaddr=400000\0"				\
- "fdtfile=8544ds_tmt/mpc8544ds.dtb\0"		\
- "eoi=mw e00400b0 0\0" 				\
- "iack=md e00400a0 1\0" 			\
+ "ramdiskfile=8544ds/ramdisk.uboot\0"		\
+ "dtbaddr=c00000\0"				\
+ "dtbfile=8544ds/mpc8544ds.dtb\0"		\
+ "bdev=sda3\0"					\
+ "eoi=mw e00400b0 0\0"				\
+ "iack=md e00400a0 1\0"				\
  "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \
 	"md ${a}e00 3; md ${a}e20 3; md ${a}e40 7; md ${a}f00 5\0" \
- "ddrregs=setenv a e0002; run ddrreg\0" 	\
+ "ddrregs=setenv a e0002; run ddrreg\0"		\
  "gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}b20 3;" \
-	"md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0" 	\
- "guregs=setenv a e00e0; run gureg\0" 		\
+	"md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0"	\
+ "guregs=setenv a e00e0; run gureg\0"		\
  "ecmreg=md ${a}000 1; md ${a}010 1; md ${a}bf8 2; md ${a}e00 6\0" \
- "ecmregs=setenv a e0001; run ecmreg\0" 	\
- PCIE_ENV 	\
- PCI_ENV 	\
+ "ecmregs=setenv a e0001; run ecmreg\0"		\
+ "lawregs=md e0000c08 4b\0" \
+ "lbcregs=md e0005000 36\0" \
+ "dma0regs=md e0021100 12\0" \
+ "dma1regs=md e0021180 12\0" \
+ "dma2regs=md e0021200 12\0" \
+ "dma3regs=md e0021280 12\0" \
+ PCIE_ENV	\
+ PCI_ENV	\
  ENET_ENV
 
 
@@ -579,23 +602,23 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
  "console=$consoledev,$baudrate $othbootargs;"	\
  "tftp $loadaddr $bootfile;"		\
- "tftp $fdtaddr $fdtfile;"		\
- "bootm $loadaddr - $fdtaddr"
+ "tftp $dtbaddr $dtbfile;"		\
+ "bootm $loadaddr - $dtbaddr"
 
 
-#define CONFIG_RAMBOOTCOMMAND 		\
+#define CONFIG_RAMBOOTCOMMAND		\
  "setenv bootargs root=/dev/ram rw "	\
  "console=$consoledev,$baudrate $othbootargs;"	\
  "tftp $ramdiskaddr $ramdiskfile;"	\
  "tftp $loadaddr $bootfile;"		\
- "tftp $fdtaddr $fdtfile;"		\
- "bootm $loadaddr $ramdiskaddr $fdtaddr"
+ "tftp $dtbaddr $dtbfile;"		\
+ "bootm $loadaddr $ramdiskaddr $dtbaddr"
 
-#define CONFIG_BOOTCOMMAND 		\
- "setenv bootargs root=/dev/sda3 rw "	\
+#define CONFIG_BOOTCOMMAND		\
+ "setenv bootargs root=/dev/$bdev rw "	\
  "console=$consoledev,$baudrate $othbootargs;"	\
  "tftp $loadaddr $bootfile;"		\
- "tftp $fdtaddr $fdtfile;"		\
- "bootm $loadaddr - $fdtaddr"
+ "tftp $dtbaddr $dtbfile;"		\
+ "bootm $loadaddr - $dtbaddr"
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index 2e84fc874..cda9fd5c1 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2004, 2007 Freescale Semiconductor.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -11,7 +11,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -36,8 +36,14 @@
 #define CONFIG_MPC8548		1	/* MPC8548 specific */
 #define CONFIG_MPC8548CDS	1	/* MPC8548CDS board specific */
 
-#define CONFIG_PCI
-#define CONFIG_TSEC_ENET 		/* tsec ethernet support */
+#define CONFIG_PCI		/* enable any pci type devices */
+#define CONFIG_PCI1		/* PCI controller 1 */
+#define CONFIG_PCIE1		/* PCIE controler 1 (slot 1) */
+#undef CONFIG_RIO
+#undef CONFIG_PCI2
+#define CONFIG_FSL_PCI_INIT	1	/* Use common FSL init code */
+
+#define CONFIG_TSEC_ENET		/* tsec ethernet support */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup*/
 #define CONFIG_DDR_DLL			/* possible DLL fix needed */
@@ -46,6 +52,7 @@
 #define CONFIG_DDR_ECC			/* only for ECC DDR module */
 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
 #define CONFIG_MEM_INIT_VALUE		0xDeadBeef
+#define CONFIG_INTERRUPTS		/* enable pci, srio, ddr interrupts */
 
 
 /*
@@ -65,16 +72,16 @@ extern unsigned long get_clock_freq(void);
 /*
  * These can be toggled for performance analysis, otherwise use default.
  */
-#define CONFIG_L2_CACHE		    	    /* toggle L2 cache 	*/
-#define CONFIG_BTB			    /* toggle branch predition */
-#define CONFIG_ADDR_STREAMING		    /* toggle addr streaming   */
+#define CONFIG_L2_CACHE			/* toggle L2 cache */
+#define CONFIG_BTB			/* toggle branch predition */
+#define CONFIG_ADDR_STREAMING		/* toggle addr streaming */
+#define CONFIG_CLEAR_LAW0		/* Clear LAW0 in cpu_init_r */
 
 /*
  * Only possible on E500 Version 2 or newer cores.
  */
 #define CONFIG_ENABLE_36BIT_PHYS	1
 
-
 #define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */
 
 #undef	CFG_DRAM_TEST			/* memory test, takes time */
@@ -85,10 +92,14 @@ extern unsigned long get_clock_freq(void);
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CFG_CCSRBAR_DEFAULT 	0xff700000	/* CCSRBAR Default */
+#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
 #define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
 #define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */
 
+#define CFG_PCI1_ADDR	(CFG_CCSRBAR+0x8000)
+#define CFG_PCI2_ADDR	(CFG_CCSRBAR+0x9000)
+#define CFG_PCIE1_ADDR	(CFG_CCSRBAR+0xa000)
+
 /*
  * DDR Setup
  */
@@ -106,7 +117,6 @@ extern unsigned long get_clock_freq(void);
 
 #undef CONFIG_CLOCKS_IN_MHZ
 
-
 /*
  * Local Bus Definitions
  */
@@ -124,9 +134,9 @@ extern unsigned long get_clock_freq(void);
  *    Use GPCM = BRx[24:26] = 000
  *    Valid = BRx[31] = 1
  *
- * 0    4    8    12   16   20   24   28
- * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001    BR0
- * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001    BR1
+ * 0	4    8	  12   16   20	 24   28
+ * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001	 BR0
+ * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001	 BR1
  *
  * OR0, OR1:
  *    Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0
@@ -137,11 +147,12 @@ extern unsigned long get_clock_freq(void);
  *    TRLX = use relaxed timing = ORx[29] = 1
  *    EAD = use external address latch delay = OR[31] = 1
  *
- * 0    4    8    12   16   20   24   28
- * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65    ORx
+ * 0	4    8	  12   16   20	 24   28
+ * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65	 ORx
  */
 
-#define CFG_FLASH_BASE		0xff000000	/* start of FLASH 8M */
+#define CFG_BOOT_BLOCK		0xff000000	/* boot TLB block */
+#define CFG_FLASH_BASE		CFG_BOOT_BLOCK	/* start of FLASH 16M */
 
 #define CFG_BR0_PRELIM		0xff801001
 #define CFG_BR1_PRELIM		0xff001001
@@ -156,7 +167,7 @@ extern unsigned long get_clock_freq(void);
 #define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
 #define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
 
-#define CFG_MONITOR_BASE    	TEXT_BASE	/* start of monitor */
+#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
 
 #define CFG_FLASH_CFI_DRIVER
 #define CFG_FLASH_CFI
@@ -166,7 +177,12 @@ extern unsigned long get_clock_freq(void);
 /*
  * SDRAM on the Local Bus
  */
-#define CFG_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
+#define CFG_LBC_CACHE_BASE	0xf0000000	/* Localbus cacheable */
+#define CFG_LBC_CACHE_SIZE	64
+#define CFG_LBC_NONCACHE_BASE	0xf8000000	/* Localbus non-cacheable */
+#define CFG_LBC_NONCACHE_SIZE	64
+
+#define CFG_LBC_SDRAM_BASE	CFG_LBC_CACHE_BASE	/* Localbus SDRAM */
 #define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
 
 /*
@@ -180,14 +196,14 @@ extern unsigned long get_clock_freq(void);
  *    SDRAM for MSEL = BR2[24:26] = 011
  *    Valid = BR[31] = 1
  *
- * 0    4    8    12   16   20   24   28
+ * 0	4    8	  12   16   20	 24   28
  * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
  *
  * FIXME: CFG_LBC_SDRAM_BASE should be masked and OR'ed into
  * FIXME: the top 17 bits of BR2.
  */
 
-#define CFG_BR2_PRELIM          0xf0001861
+#define CFG_BR2_PRELIM		0xf0001861
 
 /*
  * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
@@ -196,19 +212,19 @@ extern unsigned long get_clock_freq(void);
  *    64MB mask for AM, OR2[0:7] = 1111 1100
  *		   XAM, OR2[17:18] = 11
  *    9 columns OR2[19-21] = 010
- *    13 rows   OR2[23-25] = 100
+ *    13 rows	OR2[23-25] = 100
  *    EAD set for extra time OR[31] = 1
  *
- * 0    4    8    12   16   20   24   28
+ * 0	4    8	  12   16   20	 24   28
  * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
  */
 
 #define CFG_OR2_PRELIM		0xfc006901
 
-#define CFG_LBC_LCRR		0x00030004    /* LB clock ratio reg */
-#define CFG_LBC_LBCR		0x00000000    /* LB config reg */
-#define CFG_LBC_LSRT		0x20000000  /* LB sdram refresh timer */
-#define CFG_LBC_MRTPR		0x00000000  /* LB refresh timer prescal*/
+#define CFG_LBC_LCRR		0x00030004	/* LB clock ratio reg */
+#define CFG_LBC_LBCR		0x00000000	/* LB config reg */
+#define CFG_LBC_LSRT		0x20000000	/* LB sdram refresh timer */
+#define CFG_LBC_MRTPR		0x00000000	/* LB refresh timer prescal*/
 
 /*
  * LSDMR masks
@@ -236,7 +252,7 @@ extern unsigned long get_clock_freq(void);
 /*
  * Common settings for all Local Bus SDRAM commands.
  * At run time, either BSMA1516 (for CPU 1.1)
- *                  or BSMA1617 (for CPU 1.0) (old)
+ *		    or BSMA1617 (for CPU 1.0) (old)
  * is OR'ed in too.
  */
 #define CFG_LBC_LSDMR_COMMON	( CFG_LBC_LSDMR_RFCR16		\
@@ -256,61 +272,63 @@ extern unsigned long get_clock_freq(void);
  *    Base address of 0xf8000000 = BR[0:16] = 1111 1000 0000 0000 0
  *    port-size = 8-bits  = BR[19:20] = 01
  *    no parity checking  = BR[21:22] = 00
- *    GPMC for MSEL       = BR[24:26] = 000
- *    Valid               = BR[31]    = 1
+ *    GPMC for MSEL	  = BR[24:26] = 000
+ *    Valid		  = BR[31]    = 1
  *
- * 0    4    8    12   16   20   24   28
+ * 0	4    8	  12   16   20	 24   28
  * 1111 1000 0000 0000 0000 1000 0000 0001 = f8000801
  *
  * For OR3, need:
- *    1 MB mask for AM,   OR[0:16]  = 1111 1111 1111 0000 0
+ *    1 MB mask for AM,	  OR[0:16]  = 1111 1111 1111 0000 0
  *    disable buffer ctrl OR[19]    = 0
- *    CSNT                OR[20]    = 1
- *    ACS                 OR[21:22] = 11
- *    XACS                OR[23]    = 1
+ *    CSNT		  OR[20]    = 1
+ *    ACS		  OR[21:22] = 11
+ *    XACS		  OR[23]    = 1
  *    SCY 15 wait states  OR[24:27] = 1111	max is suboptimal but safe
- *    SETA                OR[28]    = 0
- *    TRLX                OR[29]    = 1
- *    EHTR                OR[30]    = 1
- *    EAD extra time      OR[31]    = 1
+ *    SETA		  OR[28]    = 0
+ *    TRLX		  OR[29]    = 1
+ *    EHTR		  OR[30]    = 1
+ *    EAD extra time	  OR[31]    = 1
  *
- * 0    4    8    12   16   20   24   28
+ * 0	4    8	  12   16   20	 24   28
  * 1111 1111 1111 0000 0000 1111 1111 0111 = fff00ff7
  */
 
 #define CADMUS_BASE_ADDR 0xf8000000
-#define CFG_BR3_PRELIM   0xf8000801
-#define CFG_OR3_PRELIM   0xfff00ff7
+#define CFG_BR3_PRELIM	 0xf8000801
+#define CFG_OR3_PRELIM	 0xfff00ff7
 
 #define CONFIG_L1_INIT_RAM
-#define CFG_INIT_RAM_LOCK 	1
+#define CFG_INIT_RAM_LOCK	1
 #define CFG_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
-#define CFG_INIT_RAM_END    	0x4000	    /* End of used area in RAM */
+#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */
+
+#define CFG_INIT_L2_ADDR	0xf8f80000	/* relocate boot L2SRAM */
 
-#define CFG_GBL_DATA_SIZE  	128	    /* num bytes initial data */
+#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
 #define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
-#define CFG_MONITOR_LEN	    	(256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN	    	(128 * 1024)	/* Reserved for malloc */
+#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
 
 /* Serial Port */
-#define CONFIG_CONS_INDEX     2
+#define CONFIG_CONS_INDEX	2
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
 #define CFG_NS16550
 #define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE    1
+#define CFG_NS16550_REG_SIZE	1
 #define CFG_NS16550_CLK		get_bus_freq(0)
 
-#define CFG_BAUDRATE_TABLE  \
+#define CFG_BAUDRATE_TABLE \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
-#define CFG_NS16550_COM1        (CFG_CCSRBAR+0x4500)
-#define CFG_NS16550_COM2        (CFG_CCSRBAR+0x4600)
+#define CFG_NS16550_COM1	(CFG_CCSRBAR+0x4500)
+#define CFG_NS16550_COM2	(CFG_CCSRBAR+0x4600)
 
 /* Use the HUSH parser */
 #define CFG_HUSH_PARSER
-#ifdef  CFG_HUSH_PARSER
+#ifdef	CFG_HUSH_PARSER
 #define CFG_PROMPT_HUSH_PS2 "> "
 #endif
 
@@ -331,55 +349,74 @@ extern unsigned long get_clock_freq(void);
  */
 #define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
 #define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
+#undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
 #define CFG_I2C_EEPROM_ADDR	0x57
 #define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
+#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
 #define CFG_I2C_OFFSET		0x3000
 
 /*
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
+#define CFG_PCI_PHYS		0x80000000	/* 1G PCI TLB */
+
 #define CFG_PCI1_MEM_BASE	0x80000000
 #define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE	0x10000000	/* 256M */
+#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
 #define CFG_PCI1_IO_BASE	0x00000000
 #define CFG_PCI1_IO_PHYS	0xe2000000
-#define CFG_PCI1_IO_SIZE	0x00800000	/* 8M */
+#define CFG_PCI1_IO_SIZE	0x00100000	/* 1M */
 
-#define CFG_PCI2_MEM_BASE	0x90000000
+#ifdef CONFIG_PCI2
+#define CFG_PCI2_MEM_BASE	0xa0000000
 #define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
-#define CFG_PCI2_MEM_SIZE	0x10000000	/* 256M */
+#define CFG_PCI2_MEM_SIZE	0x20000000	/* 512M */
 #define CFG_PCI2_IO_BASE	0x00000000
 #define CFG_PCI2_IO_PHYS	0xe2800000
-#define CFG_PCI2_IO_SIZE	0x00800000	/* 8M */
+#define CFG_PCI2_IO_SIZE	0x00100000	/* 1M */
+#endif
 
-#define CFG_PEX_MEM_BASE	0xa0000000
-#define CFG_PEX_MEM_PHYS	CFG_PEX_MEM_BASE
-#define CFG_PEX_MEM_SIZE	0x20000000	/* 512M */
-#define CFG_PEX_IO_BASE		0x00000000
-#define CFG_PEX_IO_PHYS		0xe3000000
-#define CFG_PEX_IO_SIZE		0x01000000	/* 16M */
+#ifdef CONFIG_PCIE1
+#define CFG_PCIE1_MEM_BASE	0xa0000000
+#define CFG_PCIE1_MEM_PHYS	CFG_PCIE1_MEM_BASE
+#define CFG_PCIE1_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCIE1_IO_BASE	0x00000000
+#define CFG_PCIE1_IO_PHYS	0xe3000000
+#define CFG_PCIE1_IO_SIZE	0x00100000	/*   1M */
+#endif
 
+#ifdef CONFIG_RIO
 /*
  * RapidIO MMU
  */
 #define CFG_RIO_MEM_BASE	0xC0000000
 #define CFG_RIO_MEM_SIZE	0x20000000	/* 512M */
+#endif
+
+#ifdef CONFIG_LEGACY
+#define BRIDGE_ID 17
+#define VIA_ID 2
+#else
+#define BRIDGE_ID 28
+#define VIA_ID 4
+#endif
 
 #if defined(CONFIG_PCI)
 
 #define CONFIG_NET_MULTI
-#define CONFIG_PCI_PNP	               	/* do pci plug-and-play */
-#define CONFIG_85XX_PCI2
+#define CONFIG_PCI_PNP			/* do pci plug-and-play */
 
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
 
 #undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
-#define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
+
+/* PCI view of System Memory */
+#define CFG_PCI_MEMORY_BUS	0x00000000
+#define CFG_PCI_MEMORY_PHYS	0x00000000
+#define CFG_PCI_MEMORY_SIZE	0x80000000
 
 #endif	/* CONFIG_PCI */
 
@@ -387,7 +424,7 @@ extern unsigned long get_clock_freq(void);
 #if defined(CONFIG_TSEC_ENET)
 
 #ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI 	1
+#define CONFIG_NET_MULTI	1
 #endif
 
 #define CONFIG_MII		1	/* MII PHY management */
@@ -397,7 +434,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_TSEC2_NAME	"eTSEC1"
 #define CONFIG_TSEC3	1
 #define CONFIG_TSEC3_NAME	"eTSEC2"
-#undef CONFIG_TSEC4
+#define CONFIG_TSEC4
 #define CONFIG_TSEC4_NAME	"eTSEC3"
 #undef CONFIG_MPC85XX_FEC
 
@@ -413,7 +450,7 @@ extern unsigned long get_clock_freq(void);
 
 /* Options are: eTSEC[0-3] */
 #define CONFIG_ETHPRIME		"eTSEC0"
-
+#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
 #endif	/* CONFIG_TSEC_ENET */
 
 /*
@@ -473,7 +510,7 @@ extern unsigned long get_clock_freq(void);
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CFG_BOOTMAPSZ	(8 << 20) 	/* Initial Memory map for Linux*/
+#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
 
 /* Cache Configuration */
 #define CFG_DCACHE_SIZE	32768
@@ -501,58 +538,156 @@ extern unsigned long get_clock_freq(void);
 
 /* The mac addresses for all ethernet interface */
 #if defined(CONFIG_TSEC_ENET)
-#define CONFIG_ETHADDR   00:E0:0C:00:00:FD
+#define CONFIG_ETHADDR	 00:E0:0C:00:00:FD
 #define CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR  00:E0:0C:00:01:FD
+#define CONFIG_ETH1ADDR	 00:E0:0C:00:01:FD
 #define CONFIG_HAS_ETH2
-#define CONFIG_ETH2ADDR  00:E0:0C:00:02:FD
+#define CONFIG_ETH2ADDR	 00:E0:0C:00:02:FD
 #define CONFIG_HAS_ETH3
-#define CONFIG_ETH3ADDR  00:E0:0C:00:03:FD
+#define CONFIG_ETH3ADDR	 00:E0:0C:00:03:FD
 #endif
 
-#define CONFIG_IPADDR    192.168.1.253
+#define CONFIG_IPADDR	 192.168.1.253
 
-#define CONFIG_HOSTNAME  unknown
-#define CONFIG_ROOTPATH  /nfsroot
-#define CONFIG_BOOTFILE  your.uImage
+#define CONFIG_HOSTNAME	 unknown
+#define CONFIG_ROOTPATH	 /nfsroot
+#define CONFIG_BOOTFILE	8548cds/uImage.uboot
+#define CONFIG_UBOOTPATH	8548cds/u-boot.bin	/* TFTP server */
 
-#define CONFIG_SERVERIP  192.168.1.1
+#define CONFIG_SERVERIP	 192.168.1.1
 #define CONFIG_GATEWAYIP 192.168.1.1
-#define CONFIG_NETMASK   255.255.255.0
+#define CONFIG_NETMASK	 255.255.255.0
 
-#define CONFIG_LOADADDR  200000   /*default location for tftp and bootm*/
+#define CONFIG_LOADADDR	1000000	/*default location for tftp and bootm*/
 
-#define CONFIG_BOOTDELAY 10       /* -1 disables auto-boot */
-#undef  CONFIG_BOOTARGS           /* the boot command will set bootargs*/
+#define CONFIG_BOOTDELAY 10	/* -1 disables auto-boot */
+#undef	CONFIG_BOOTARGS		/* the boot command will set bootargs*/
 
 #define CONFIG_BAUDRATE	115200
 
-#define	CONFIG_EXTRA_ENV_SETTINGS				        \
-   "netdev=eth0\0"                                                      \
-   "consoledev=ttyS1\0"                                                 \
-   "ramdiskaddr=600000\0"                                               \
-   "ramdiskfile=your.ramdisk.u-boot\0"					\
-   "fdtaddr=400000\0"							\
-   "fdtfile=your.fdt.dtb\0"
+#if defined(CONFIG_PCIE1)
+#define PCIE_ENV \
+ "pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \
+	"echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \
+ "pcieerr=md ${a}020 1; md ${a}e00 e; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \
+	"pci d.w $b.0 56 1; pci d $b.0 104 1; pci d $b.0 110 1;" \
+	"pci d $b.0 130 1\0" \
+ "pcieerrc=mw ${a}020 ffffffff; mw ${a}e00 ffffffff; pci w.b $b.0 7 ff;" \
+	"pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff; pci w $b.0 104 ffffffff;"\
+	"pci w $b.0 110 ffffffff; pci w $b.0 130 ffffffff\0" \
+ "pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0" \
+ "pcie1regs=setenv a e000a; run pciereg\0" \
+ "pcie1cfg=setenv b 3; run pciecfg\0" \
+ "pcie1err=setenv a e000a; setenv b 3; run pcieerr\0" \
+ "pcie1errc=setenv a e000a; setenv b 3; run pcieerrc\0"
+#else
+#define	PCIE_ENV ""
+#endif
+
+#if defined(CONFIG_PCI1) || defined(CONFIG_PCI2)
+#define PCI_ENV \
+ "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \
+	"echo e;md ${a}e00 9\0" \
+ "pcierr=md ${a}e00 8; pci d.b $b.0 7 1;pci d.w $b.0 1e 1;" \
+	"pci d.w $b.0 56 1\0" \
+ "pcierrc=mw ${a}e00 ffffffff; mw ${a}e0c 0; pci w.b $b.0 7 ff;" \
+	"pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff\0"
+#else
+#define	PCI_ENV ""
+#endif
+
+#if defined(CONFIG_PCI1)
+#define PCI_ENV1 \
+ "pci1regs=setenv a e0008; run pcireg\0" \
+ "pci1err=setenv a e0008; setenv b 0; run pcierr\0" \
+ "pci1errc=setenv a e0008; setenv b 0; run pcierrc\0"
+#else
+#define	PCI_ENV1 ""
+#endif
+
+#if defined(CONFIG_PCI2)
+#define PCI_ENV2 \
+ "pci2regs=setenv a e0009; run pcireg\0" \
+ "pci2err=setenv a e0009; setenv b 123; run pcierr\0"	\
+ "pci2errc=setenv a e0009; setenv b 123; run pcierrc\0"
+#else
+#define	PCI_ENV2 ""
+#endif
+
+#if defined(CONFIG_TSEC_ENET)
+#define ENET_ENV \
+ "enetreg1=md ${a}000 2; md ${a}010 9; md ${a}050 4; md ${a}08c 1;" \
+	"md ${a}098 2\0" \
+ "enetregt=echo t;md ${a}100 6; md ${a}140 2; md ${a}180 10; md ${a}200 10\0" \
+ "enetregr=echo r;md ${a}300 6; md ${a}330 5; md ${a}380 10; md ${a}400 10\0" \
+ "enetregm=echo mac;md ${a}500 5; md ${a}520 28;echo fifo;md ${a}a00 1;" \
+	"echo mib;md ${a}680 31\0" \
+ "enetreg=run enetreg1; run enetregm; run enetregt; run enetregr\0" \
+ "enet1regs=setenv a e0024; run enetreg\0" \
+ "enet2regs=setenv a e0025; run enetreg\0" \
+ "enet3regs=setenv a e0026; run enetreg\0" \
+ "enet4regs=setenv a e0027; run enetreg\0"
+#else
+#define ENET_ENV ""
+#endif
+
+#if 0
+#define	CONFIG_EXTRA_ENV_SETTINGS				\
+ "netdev=eth0\0"						\
+ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"				\
+ "tftpflash=tftpboot $loadaddr $uboot; "			\
+	"protect off " MK_STR(TEXT_BASE) " +$filesize; "	\
+	"erase " MK_STR(TEXT_BASE) " +$filesize; "		\
+	"cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; "	\
+	"protect on " MK_STR(TEXT_BASE) " +$filesize; "		\
+	"cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0"	\
+ "consoledev=ttyS1\0"				\
+ "ramdiskaddr=2000000\0"			\
+ "ramdiskfile=ramdisk.uboot\0"			\
+ "dtbaddr=c00000\0"				\
+ "dtbfile=mpc8548cds.dtb\0"			\
+ "eoi=mw e00400b0 0\0"				\
+ "iack=md e00400a0 1\0"				\
+ "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \
+	"md ${a}e00 3; md ${a}e20 3; md ${a}e40 7; md ${a}f00 5\0" \
+ "ddrregs=setenv a e0002; run ddrreg\0"		\
+ "gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}b20 3;" \
+	"md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0"	\
+ "guregs=setenv a e00e0; run gureg\0"		\
+ "ecmreg=md ${a}000 1; md ${a}010 1; md ${a}bf8 2; md ${a}e00 6\0" \
+ "ecmregs=setenv a e0001; run ecmreg\0" \
+ "lawregs=md e0000c08 4b\0" \
+ "lbcregs=md e0005000 36\0" \
+ "dma0regs=md e0021100 12\0" \
+ "dma1regs=md e0021180 12\0" \
+ "dma2regs=md e0021200 12\0" \
+ "dma3regs=md e0021280 12\0" \
+ PCIE_ENV \
+ PCI_ENV \
+ PCI_ENV1 \
+ PCI_ENV2 \
+ ENET_ENV
+#endif
 
 
-#define CONFIG_NFSBOOTCOMMAND	                                        \
-   "setenv bootargs root=/dev/nfs rw "                                  \
-      "nfsroot=$serverip:$rootpath "                                    \
+#define CONFIG_NFSBOOTCOMMAND						\
+   "setenv bootargs root=/dev/nfs rw "					\
+      "nfsroot=$serverip:$rootpath "					\
       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
-      "console=$consoledev,$baudrate $othbootargs;"                     \
-   "tftp $loadaddr $bootfile;"                                          \
-   "tftp $fdtaddr $fdtfile;"						\
-   "bootm $loadaddr - $fdtaddr"
+      "console=$consoledev,$baudrate $othbootargs;"			\
+   "tftp $loadaddr $bootfile;"						\
+   "tftp $dtbaddr $dtbfile;"						\
+   "bootm $loadaddr - $dtbaddr"
 
 
 #define CONFIG_RAMBOOTCOMMAND \
-   "setenv bootargs root=/dev/ram rw "                                  \
-      "console=$consoledev,$baudrate $othbootargs;"                     \
-   "tftp $ramdiskaddr $ramdiskfile;"                                    \
-   "tftp $loadaddr $bootfile;"                                          \
-   "bootm $loadaddr $ramdiskaddr"
+   "setenv bootargs root=/dev/ram rw "					\
+      "console=$consoledev,$baudrate $othbootargs;"			\
+   "tftp $ramdiskaddr $ramdiskfile;"					\
+   "tftp $loadaddr $bootfile;"						\
+   "tftp $dtbaddr $dtbfile;"						\
+   "bootm $loadaddr $ramdiskaddr $dtbaddr"
 
-#define CONFIG_BOOTCOMMAND  CONFIG_NFSBOOTCOMMAND
+#define CONFIG_BOOTCOMMAND	CONFIG_NFSBOOTCOMMAND
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h
index a3025bd71..e8fe99aaf 100644
--- a/include/configs/MPC8555CDS.h
+++ b/include/configs/MPC8555CDS.h
@@ -350,6 +350,13 @@ extern unsigned long get_clock_freq(void);
 #define CFG_PCI2_IO_PHYS	0xe2100000
 #define CFG_PCI2_IO_SIZE	0x00100000	/* 1M */
 
+#ifdef CONFIG_LEGACY
+#define BRIDGE_ID 17
+#define VIA_ID 2
+#else
+#define BRIDGE_ID 28
+#define VIA_ID 4
+#endif
 
 #if defined(CONFIG_PCI)
 
diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h
index eef168c25..dc9cb1ff5 100644
--- a/include/configs/MPC8568MDS.h
+++ b/include/configs/MPC8568MDS.h
@@ -28,20 +28,21 @@
 
 /* High Level Configuration Options */
 #define CONFIG_BOOKE		1	/* BOOKE */
-#define CONFIG_E500			1	/* BOOKE e500 family */
+#define CONFIG_E500		1	/* BOOKE e500 family */
 #define CONFIG_MPC85xx		1	/* MPC8540/60/55/41/48/68 */
 #define CONFIG_MPC8568		1	/* MPC8568 specific */
 #define CONFIG_MPC8568MDS	1	/* MPC8568MDS board specific */
 
-#undef CONFIG_PCI
+#define CONFIG_PCI
 #define CONFIG_TSEC_ENET 		/* tsec ethernet support */
+#undef CONFIG_QE			/* Enable QE */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup*/
 #define CONFIG_DDR_DLL			/* possible DLL fix needed */
 /*#define CONFIG_DDR_2T_TIMING		 Sets the 2T timing bit */
 
 /*#define CONFIG_DDR_ECC*/			/* only for ECC DDR module */
-/*#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER*/	/* 	 DDR controller or DMA? */
+/*#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER*/	/* DDR controller or DMA? */
 #define CONFIG_MEM_INIT_VALUE		0xDeadBeef
 
 
@@ -297,6 +298,7 @@ extern unsigned long get_clock_freq(void);
 
 #define OF_CPU			"PowerPC,8568@0"
 #define OF_SOC			"soc8568@e0000000"
+#define OF_QE			"qe@e0080000"
 #define OF_TBCLK		(bd->bi_busfreq / 8)
 #define OF_STDOUT_PATH		"/soc8568@e0000000/serial@4600"
 
@@ -306,11 +308,14 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
 #define CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
-#define CFG_I2C_EEPROM_ADDR	0x57
+#define CFG_I2C_EEPROM_ADDR	0x52
 #define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES        {0x69}	/* Don't probe these addrs */
+#define CFG_I2C_NOPROBES        {{0,0x69}}	/* Don't probe these addrs */
 #define CFG_I2C_OFFSET		0x3000
+#define CFG_I2C2_OFFSET		0x3100
 
 /*
  * General PCI
@@ -318,7 +323,7 @@ extern unsigned long get_clock_freq(void);
  */
 #define CFG_PCI1_MEM_BASE	0x80000000
 #define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
-#define CFG_PCI1_MEM_SIZE	0x10000000	/* 256M */
+#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
 #define CFG_PCI1_IO_BASE	0x00000000
 #define CFG_PCI1_IO_PHYS	0xe2000000
 #define CFG_PCI1_IO_SIZE	0x00800000	/* 8M */
@@ -337,6 +342,44 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP	               	/* do pci plug-and-play */
 
+#ifdef CONFIG_QE
+/*
+ * QE UEC ethernet configuration
+ */
+#define CONFIG_UEC_ETH
+#ifndef CONFIG_TSEC_ENET
+#define CONFIG_ETHPRIME         "Freescale GETH"
+#endif
+#define CONFIG_PHY_MODE_NEED_CHANGE
+#define CONFIG_eTSEC_MDIO_BUS
+
+#ifdef CONFIG_eTSEC_MDIO_BUS
+#define CONFIG_MIIM_ADDRESS 	0xE0024520
+#endif
+
+#define CONFIG_UEC_ETH1         /* GETH1 */
+
+#ifdef CONFIG_UEC_ETH1
+#define CFG_UEC1_UCC_NUM        0       /* UCC1 */
+#define CFG_UEC1_RX_CLK         QE_CLK_NONE
+#define CFG_UEC1_TX_CLK         QE_CLK16
+#define CFG_UEC1_ETH_TYPE       GIGA_ETH
+#define CFG_UEC1_PHY_ADDR       7
+#define CFG_UEC1_INTERFACE_MODE ENET_1000_GMII
+#endif
+
+#define CONFIG_UEC_ETH2         /* GETH2 */
+
+#ifdef CONFIG_UEC_ETH2
+#define CFG_UEC2_UCC_NUM        1       /* UCC2 */
+#define CFG_UEC2_RX_CLK         QE_CLK_NONE
+#define CFG_UEC2_TX_CLK         QE_CLK16
+#define CFG_UEC2_ETH_TYPE       GIGA_ETH
+#define CFG_UEC2_PHY_ADDR       1
+#define CFG_UEC2_INTERFACE_MODE ENET_1000_GMII
+#endif
+#endif /* CONFIG_QE */
+
 #undef CONFIG_EEPRO100
 #undef CONFIG_TULIP
 
@@ -345,13 +388,12 @@ extern unsigned long get_clock_freq(void);
 
 #endif	/* CONFIG_PCI */
 
-
-#if defined(CONFIG_TSEC_ENET)
-
 #ifndef CONFIG_NET_MULTI
 #define CONFIG_NET_MULTI 	1
 #endif
 
+#if defined(CONFIG_TSEC_ENET)
+
 #define CONFIG_MII		1	/* MII PHY management */
 #define CONFIG_TSEC1	1
 #define CONFIG_TSEC1_NAME	"eTSEC0"
@@ -457,12 +499,15 @@ extern unsigned long get_clock_freq(void);
  */
 
 /* The mac addresses for all ethernet interface */
-#if defined(CONFIG_TSEC_ENET)
+#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_UEC_ETH)
+#define CONFIG_HAS_ETH0
 #define CONFIG_ETHADDR   00:E0:0C:00:00:FD
 #define CONFIG_HAS_ETH1
 #define CONFIG_ETH1ADDR  00:E0:0C:00:01:FD
 #define CONFIG_HAS_ETH2
 #define CONFIG_ETH2ADDR  00:E0:0C:00:02:FD
+#define CONFIG_HAS_ETH3
+#define CONFIG_ETH3ADDR  00:E0:0C:00:03:FD
 #endif
 
 #define CONFIG_IPADDR    192.168.1.253
diff --git a/include/mpc85xx.h b/include/mpc85xx.h
index 6fbd50457..321b24f75 100644
--- a/include/mpc85xx.h
+++ b/include/mpc85xx.h
@@ -1,14 +1,14 @@
 /*
- * Copyright 2004 Freescale Semiconductor.
+ * Copyright 2004, 2007 Freescale Semiconductor.
  * Copyright(c) 2003 Motorola Inc.
- * Xianghua Xiao (x.xiao@motorola.com)
  */
 
 #ifndef	__MPC85xx_H__
 #define __MPC85xx_H__
 
-#define EXC_OFF_SYS_RESET	0x0100	/* System reset	*/
-#define	_START_OFFSET		EXC_OFF_SYS_RESET
+/* define for common ppc_asm.tmpl */
+#define EXC_OFF_SYS_RESET	0x100	/* System reset */
+#define _START_OFFSET		0
 
 #if defined(CONFIG_E500)
 #include <e500.h>
diff --git a/include/ppc_asm.tmpl b/include/ppc_asm.tmpl
index ac8f31768..0019d4609 100644
--- a/include/ppc_asm.tmpl
+++ b/include/ppc_asm.tmpl
@@ -285,7 +285,6 @@ label:								\
 	.long	hdlr - _start + _START_OFFSET;			\
 	.long	crit_return - _start + _START_OFFSET
 
-#ifdef CONFIG_440
 #define MCK_EXCEPTION(n, label, hdlr)				\
 	. = n;							\
 label:								\
@@ -299,6 +298,5 @@ label:								\
 .L_ ## label :							\
 	.long	hdlr - _start + _START_OFFSET;			\
 	.long	mck_return - _start + _START_OFFSET
-#endif /* CONFIG_440  */
 
 #endif	/* __PPC_ASM_TMPL__ */