Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx

Conflicts:

	Makefile

Signed-off-by: Wolfgang Denk <wd@denx.de>

40 files changed, 2107 insertions, 336 deletions

diff --git a/CREDITS b/CREDITS
index 4fe4e63f0..376732221 100644
--- a/CREDITS
+++ b/CREDITS
@@ -405,7 +405,8 @@ D: Atmel AT91CAP9ADK support
 
 N: Ricardo Ribalda Delgado
 E: ricardo.ribalda@uam.es
-D: PPC440x5 (Virtex5), ML507 Board, eeprom_simul, adt7460
+D: PPC440x5 (Virtex5), ML507 Board, eeprom_simul, adt7460, v5fx30teval
+D: Virtex ppc440 generic architecture
 W: http://www.ii.uam.es/~rribalda
 
 N: Stefan Roese
diff --git a/MAINTAINERS b/MAINTAINERS
index 3f16dabf5..64d84097a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -314,6 +314,8 @@ Daniel Poirot <dan.poirot@windriver.com>
 Ricardo Ribalda <ricardo.ribalda@uam.es>
 
 	ml507 		PPC440x5
+	v5fx30teval	PPC440x5
+	xilinx-pp440-generic	PPC440x5
 
 Stefan Roese <sr@denx.de>
 
diff --git a/MAKEALL b/MAKEALL
index fbdcb4243..9ccb9ac99 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -230,12 +230,16 @@ LIST_4xx="		\
 	sequoia_nand	\
 	taihu		\
 	taishan		\
+	v5fx30teval	\
+	v5fx30teval_flash \
 	VOH405		\
 	VOM405		\
 	W7OLMC		\
 	W7OLMG		\
 	walnut		\
 	WUH405		\
+	xilinx-ppc440-generic \
+	xilinx-ppc440-generic_flash \
 	XPEDITE1K	\
 	yellowstone	\
 	yosemite	\
diff --git a/Makefile b/Makefile
index 91f542e77..a342a8808 100644
--- a/Makefile
+++ b/Makefile
@@ -1242,12 +1242,14 @@ CMS700_config:	unconfig
 CPCI2DP_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
 
-CPCI405_config	\
-CPCI4052_config	\
+CPCI405_config:		unconfig
+	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
+
+CPCI4052_config		\
 CPCI405DT_config	\
 CPCI405AB_config:	unconfig
+	@echo "TEXT_BASE = 0xFFFC0000" > $(obj)board/esd/cpci405/config.tmp
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
-	@echo "BOARD_REVISION = $(@:_config=)"	>> $(obj)include/config.mk
 
 CPCIISER4_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd
@@ -1356,16 +1358,19 @@ ML2_config:	unconfig
 ml300_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx
 
-ml507_flash_config:	unconfig
+ml507_flash_config: unconfig
 	@mkdir -p $(obj)include $(obj)board/xilinx/ml507
-	@cp board/xilinx/ml507/u-boot-rom.lds  $(obj)board/xilinx/ml507/u-boot.lds
-	@echo "TEXT_BASE = 0xFE360000" > $(obj)board/xilinx/ml507/config.tmp
-	@$(MKCONFIG) $(@:_flash_config=) ppc ppc4xx ml507 xilinx
+	@echo "LDSCRIPT  := $(obj)board/xilinx/ppc440-generic/u-boot-rom.lds" \
+		> $(obj)board/xilinx/ml507/config.mk
+	@echo "TEXT_BASE := 0xFE360000" >> $(obj)board/xilinx/ml507/config.mk
+	@$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
 
-ml507_config:	unconfig
+ml507_config: unconfig
 	@mkdir -p $(obj)include $(obj)board/xilinx/ml507
-	@cp board/xilinx/ml507/u-boot-ram.lds  $(obj)board/xilinx/ml507/u-boot.lds
-	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ml507 xilinx
+	@echo "LDSCRIPT  := $(obj)board/xilinx/ppc440-generic/u-boot-ram.lds" \
+		> $(obj)board/xilinx/ml507/config.mk
+	@echo "TEXT_BASE := 0x04000000" >> $(obj)board/xilinx/ml507/config.mk
+	@$(MKCONFIG) ml507 ppc ppc4xx ml507 xilinx
 
 ocotea_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc
@@ -1461,6 +1466,18 @@ taihu_config:	unconfig
 taishan_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc
 
+v5fx30teval_config: unconfig
+	@mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
+	@echo "LDSCRIPT  := $(obj)board/xilinx/ppc440-generic/u-boot-ram.lds" > $(obj)board/avnet/v5fx30teval/config.mk
+	@echo "TEXT_BASE := 0x03000000" >> $(obj)board/avnet/v5fx30teval/config.mk
+	@$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
+
+v5fx30teval_flash_config: unconfig
+	@mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
+	@echo "LDSCRIPT  := $(obj)board/xilinx/ppc440-generic/u-boot-rom.lds" > $(obj)board/avnet/v5fx30teval/config.mk
+	@echo "TEXT_BASE := 0xFF1C0000" >> $(obj)board/avnet/v5fx30teval/config.mk
+	@$(MKCONFIG) v5fx30teval ppc ppc4xx v5fx30teval avnet
+
 VOH405_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd
 
@@ -1479,6 +1496,18 @@ sycamore_config: unconfig
 WUH405_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd
 
+xilinx-ppc440-generic_flash_config: unconfig
+	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic/
+	@echo "LDSCRIPT  := $(obj)board/xilinx/ppc440-generic/u-boot-rom.lds" > $(obj)board/xilinx/ppc440-generic/config.mk
+	@echo "TEXT_BASE := 0xFE360000" >> $(obj)board/xilinx/ppc440-generic/config.mk
+	@$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
+
+xilinx-ppc440-generic_config: unconfig
+	@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic/
+	@echo "LDSCRIPT  := $(obj)board/xilinx/ppc440-generic/u-boot-ram.lds" > $(obj)board/xilinx/ppc440-generic/config.mk
+	@echo "TEXT_BASE := 0x04000000" >> $(obj)board/xilinx/ppc440-generic/config.mk
+	@$(MKCONFIG) xilinx-ppc440-generic ppc ppc4xx ppc440-generic xilinx
+
 XPEDITE1K_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1k
 
diff --git a/board/avnet/v5fx30teval/.gitignore b/board/avnet/v5fx30teval/.gitignore
new file mode 100644
index 000000000..6896ef611
--- /dev/null
+++ b/board/avnet/v5fx30teval/.gitignore
@@ -0,0 +1 @@
+/config.mk
diff --git a/board/xilinx/ml507/config.mk b/board/avnet/v5fx30teval/Makefile
index e827e8a93..de23f296c 100644
--- a/board/xilinx/ml507/config.mk
+++ b/board/avnet/v5fx30teval/Makefile
@@ -1,6 +1,7 @@
 #
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# (C) Copyright 2008
+# Ricardo Ribalda,Universidad Autonoma de Madrid, ricardo.ribalda@uam.es
+# This work has been supported by: Qtechnology http://qtec.com/
 #
 # See file CREDITS for list of people who contributed to this
 # project.
@@ -20,8 +21,7 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 # MA 02111-1307 USA
 #
-sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
 
-ifndef TEXT_BASE
-TEXT_BASE = 0x04000000
-endif
+COBJS	+= $(BOARD).o
+
+include $(SRCTREE)/board/xilinx/ppc440-generic/Makefile
diff --git a/board/avnet/v5fx30teval/v5fx30teval.c b/board/avnet/v5fx30teval/v5fx30teval.c
new file mode 100644
index 000000000..14a1d5d52
--- /dev/null
+++ b/board/avnet/v5fx30teval/v5fx30teval.c
@@ -0,0 +1,28 @@
+/*
+ * (C) Copyright 2008
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * This work has been supported by: QTechnology  http://qtec.com/
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+#include <common.h>
+#include <asm/processor.h>
+
+
+int checkboard(void)
+{
+	puts("Avnet Virtex 5 FX30 Evaluation Board\n");
+	return 0;
+}
diff --git a/board/avnet/v5fx30teval/xparameters.h b/board/avnet/v5fx30teval/xparameters.h
new file mode 100644
index 000000000..bb657fcf2
--- /dev/null
+++ b/board/avnet/v5fx30teval/xparameters.h
@@ -0,0 +1,33 @@
+/*
+ * (C) Copyright 2008
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * This work has been supported by: QTechnology  http://qtec.com/
+ * based on xparameters.h by Xilinx
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef XPARAMETER_H
+#define XPARAMETER_H
+
+#define XPAR_DDR2_SDRAM_MEM_BASEADDR	0x00000000
+#define XPAR_INTC_0_BASEADDR		0x81800000
+#define XPAR_UARTLITE_0_BASEADDR	0x84000000
+#define XPAR_FLASH_MEM0_BASEADDR	0xFF000000
+#define XPAR_PLB_CLOCK_FREQ_HZ		100000000
+#define XPAR_CORE_CLOCK_FREQ_HZ		400000000
+#define XPAR_INTC_MAX_NUM_INTR_INPUTS	13
+#define XPAR_UARTLITE_0_BAUDRATE	9600
+
+#endif
diff --git a/board/esd/cpci405/config.mk b/board/esd/cpci405/config.mk
index 0be45c70d..6cfb8912d 100644
--- a/board/esd/cpci405/config.mk
+++ b/board/esd/cpci405/config.mk
@@ -21,20 +21,8 @@
 # MA 02111-1307 USA
 #
 
-#
-# esd CPCI405 boards
-#
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
 
-ifeq ($(BOARD_REVISION),CPCI4052)
-TEXT_BASE = 0xFFFC0000
-else
-ifeq ($(BOARD_REVISION),CPCI405DT)
-TEXT_BASE = 0xFFFC0000
-else
-ifeq ($(BOARD_REVISION),CPCI405AB)
-TEXT_BASE = 0xFFFC0000
-else
+ifndef TEXT_BASE
 TEXT_BASE = 0xFFFD0000
 endif
-endif
-endif
diff --git a/board/esd/cpci405/u-boot.lds b/board/esd/cpci405/u-boot.lds
index 21547ac27..2a1fc31ce 100644
--- a/board/esd/cpci405/u-boot.lds
+++ b/board/esd/cpci405/u-boot.lds
@@ -57,22 +57,7 @@ SECTIONS
   .plt : { *(.plt) }
   .text      :
   {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
     cpu/ppc4xx/start.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/4xx_uart.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    . = env_offset;*/
-/*    common/environment.o(.text)*/
 
     *(.text)
     *(.fixup)
diff --git a/board/netstal/hcu5/sdram.c b/board/netstal/hcu5/sdram.c
index 66a958c78..e5df62ef7 100644
--- a/board/netstal/hcu5/sdram.c
+++ b/board/netstal/hcu5/sdram.c
@@ -122,7 +122,7 @@ void sdram_panic(const char *reason)
 }
 
 #ifdef CONFIG_DDR_ECC
-static void blank_string(int size)
+void blank_string(int size)
 {
 	int i;
 
diff --git a/board/xilinx/ml507/.gitignore b/board/xilinx/ml507/.gitignore
new file mode 100644
index 000000000..6896ef611
--- /dev/null
+++ b/board/xilinx/ml507/.gitignore
@@ -0,0 +1 @@
+/config.mk
diff --git a/board/xilinx/ml507/Makefile b/board/xilinx/ml507/Makefile
index 72837048a..de23f296c 100644
--- a/board/xilinx/ml507/Makefile
+++ b/board/xilinx/ml507/Makefile
@@ -1,6 +1,7 @@
 #
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# (C) Copyright 2008
+# Ricardo Ribalda,Universidad Autonoma de Madrid, ricardo.ribalda@uam.es
+# This work has been supported by: Qtechnology http://qtec.com/
 #
 # See file CREDITS for list of people who contributed to this
 # project.
@@ -21,38 +22,6 @@
 # MA 02111-1307 USA
 #
 
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-endif
+COBJS	+= $(BOARD).o
 
-INCS		:=
-CFLAGS		+= $(INCS)
-HOST_CFLAGS	+= $(INCS)
-
-LIB	= $(obj)lib$(BOARD).a
-
-COBJS	= $(BOARD).o
-
-SOBJS	= init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(OBJS) $(SOBJS)
-	$(AR) $(ARFLAGS) $@ $^
-
-clean:
-	rm -f $(SOBJS) $(OBJS)
-
-distclean:	clean
-	rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+include $(SRCTREE)/board/xilinx/ppc440-generic/Makefile
diff --git a/board/xilinx/ml507/init.S b/board/xilinx/ml507/init.S
deleted file mode 100644
index 3228a65e5..000000000
--- a/board/xilinx/ml507/init.S
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *  (C) Copyright 2008
- *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
- *  This work has been supported by: QTechnology  http://qtec.com/
- *
- *  This program is free software: you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation, either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#include <ppc_asm.tmpl>
-#include <config.h>
-#include <asm-ppc/mmu.h>
-
-.section .bootpg,"ax"
-.globl tlbtab
-
-tlbtab:
-tlbtab_start
-	/* SDRAM */
-tlbentry(XPAR_DDR2_SDRAM_MEM_BASEADDR, SZ_256M, CFG_SDRAM_BASE, 0,
-	 AC_R | AC_W | AC_X | SA_G | SA_I)
-	/* UART */
-tlbentry(XPAR_UARTLITE_0_BASEADDR, SZ_64K, XPAR_UARTLITE_0_BASEADDR, 0,
-	 AC_R | AC_W | SA_G | SA_I)
-	/* PIC */
-tlbentry(XPAR_INTC_0_BASEADDR, SZ_64K, XPAR_INTC_0_BASEADDR, 0,
-	 AC_R | AC_W | SA_G | SA_I)
-#ifdef XPAR_IIC_EEPROM_BASEADDR
-	/* I2C */
-tlbentry(XPAR_IIC_EEPROM_BASEADDR, SZ_64K, XPAR_IIC_EEPROM_BASEADDR, 0,
-	 AC_R | AC_W | SA_G | SA_I)
-#endif
-#ifdef XPAR_LLTEMAC_0_BASEADDR
-	/* Net */
-tlbentry(XPAR_LLTEMAC_0_BASEADDR, SZ_64K, XPAR_LLTEMAC_0_BASEADDR, 0,
-	 AC_R | AC_W | SA_G | SA_I)
-#endif
-#ifdef XPAR_FLASH_MEM0_BASEADDR
-	/*Flash*/
-tlbentry(XPAR_FLASH_MEM0_BASEADDR, SZ_256M, XPAR_FLASH_MEM0_BASEADDR, 0,
-	 AC_R | AC_W | AC_X | SA_G | SA_I)
-#endif
-tlbtab_end
diff --git a/board/xilinx/ml507/ml507.c b/board/xilinx/ml507/ml507.c
index d4993039e..f9789cf0f 100644
--- a/board/xilinx/ml507/ml507.c
+++ b/board/xilinx/ml507/ml507.c
@@ -20,28 +20,9 @@
 #include <common.h>
 #include <asm/processor.h>
 
-int board_pre_init(void)
-{
-	return 0;
-}
 
 int checkboard(void)
 {
-	puts("ML507 Board\n");
+	puts("Xilinx ML507 Board\n");
 	return 0;
 }
-
-phys_size_t initdram(int board_type)
-{
-	return get_ram_size(XPAR_DDR2_SDRAM_MEM_BASEADDR,
-			    CFG_SDRAM_SIZE_MB * 1024 * 1024);
-}
-
-void get_sys_info(sys_info_t * sysInfo)
-{
-	sysInfo->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ;
-	sysInfo->freqPLB = XPAR_PLB_CLOCK_FREQ_HZ;
-	sysInfo->freqPCI = 0;
-
-	return;
-}
diff --git a/board/xilinx/ml507/xparameters.h b/board/xilinx/ml507/xparameters.h
index 77d2ddf9b..1992fff22 100644
--- a/board/xilinx/ml507/xparameters.h
+++ b/board/xilinx/ml507/xparameters.h
@@ -21,15 +21,14 @@
 #ifndef XPARAMETER_H
 #define XPARAMETER_H
 
-#define XPAR_DDR2_SDRAM_MEM_BASEADDR 	0x00000000
-#define XPAR_IIC_EEPROM_BASEADDR 	0x81600000
-#define XPAR_INTC_0_BASEADDR 		0x81800000
-#define XPAR_LLTEMAC_0_BASEADDR 	0x81C00000
-#define XPAR_UARTLITE_0_BASEADDR 	0x84000000
-#define XPAR_FLASH_MEM0_BASEADDR 	0xFE000000
-#define XPAR_PLB_CLOCK_FREQ_HZ 		100000000
-#define XPAR_CORE_CLOCK_FREQ_HZ 	400000000
-#define XPAR_INTC_MAX_NUM_INTR_INPUTS 	13
+#define XPAR_DDR2_SDRAM_MEM_BASEADDR	0x00000000
+#define XPAR_IIC_EEPROM_BASEADDR	0x81600000
+#define XPAR_INTC_0_BASEADDR		0x81800000
+#define XPAR_UARTLITE_0_BASEADDR	0x84000000
+#define XPAR_FLASH_MEM0_BASEADDR	0xFE000000
+#define XPAR_PLB_CLOCK_FREQ_HZ		100000000
+#define XPAR_CORE_CLOCK_FREQ_HZ		400000000
+#define XPAR_INTC_MAX_NUM_INTR_INPUTS	13
 #define XPAR_UARTLITE_0_BAUDRATE	9600
 
 #endif
diff --git a/board/xilinx/ppc440-generic/.gitignore b/board/xilinx/ppc440-generic/.gitignore
new file mode 100644
index 000000000..6896ef611
--- /dev/null
+++ b/board/xilinx/ppc440-generic/.gitignore
@@ -0,0 +1 @@
+/config.mk
diff --git a/board/xilinx/ppc440-generic/Makefile b/board/xilinx/ppc440-generic/Makefile
new file mode 100644
index 000000000..f7405a840
--- /dev/null
+++ b/board/xilinx/ppc440-generic/Makefile
@@ -0,0 +1,62 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+# Work supported by Qtechnology http://www.qtec.com
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+endif
+
+INCS		:=
+CFLAGS		+= $(INCS)
+HOST_CFLAGS	+= $(INCS)
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	+= $(SRCTREE)/board/xilinx/ppc440-generic/xilinx_ppc440_generic.o
+
+SOBJS	+= $(SRCTREE)/board/xilinx/ppc440-generic/init.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $^
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/xilinx/ppc440-generic/init.S b/board/xilinx/ppc440-generic/init.S
new file mode 100644
index 000000000..1409467ea
--- /dev/null
+++ b/board/xilinx/ppc440-generic/init.S
@@ -0,0 +1,45 @@
+/*
+ *  (C) Copyright 2008
+ *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ *  This work has been supported by: QTechnology  http://qtec.com/
+ *
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+#include <asm-ppc/mmu.h>
+
+.section .bootpg,"ax"
+.globl tlbtab
+
+tlbtab:
+tlbtab_start
+tlbentry(0x00000000, SZ_256M, 0x00000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0x10000000, SZ_256M, 0x10000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0x20000000, SZ_256M, 0x20000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0x30000000, SZ_256M, 0x30000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0x40000000, SZ_256M, 0x40000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0x50000000, SZ_256M, 0x50000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0x60000000, SZ_256M, 0x60000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0x70000000, SZ_256M, 0x70000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0x80000000, SZ_256M, 0x80000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0x90000000, SZ_256M, 0x90000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0xa0000000, SZ_256M, 0xa0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0xb0000000, SZ_256M, 0xb0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0xc0000000, SZ_256M, 0xc0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0xd0000000, SZ_256M, 0xd0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0xe0000000, SZ_256M, 0xe0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbentry(0xf0000000, SZ_256M, 0xf0000000, 0, AC_R | AC_W | AC_X | SA_G | SA_I)
+tlbtab_end
diff --git a/board/xilinx/ml507/u-boot-ram.lds b/board/xilinx/ppc440-generic/u-boot-ram.lds
index 2c98d2785..2c98d2785 100644
--- a/board/xilinx/ml507/u-boot-ram.lds
+++ b/board/xilinx/ppc440-generic/u-boot-ram.lds
diff --git a/board/xilinx/ml507/u-boot-rom.lds b/board/xilinx/ppc440-generic/u-boot-rom.lds
index d5da018ba..d5da018ba 100644
--- a/board/xilinx/ml507/u-boot-rom.lds
+++ b/board/xilinx/ppc440-generic/u-boot-rom.lds
diff --git a/board/xilinx/ppc440-generic/xilinx_ppc440_generic.c b/board/xilinx/ppc440-generic/xilinx_ppc440_generic.c
new file mode 100644
index 000000000..0867226ff
--- /dev/null
+++ b/board/xilinx/ppc440-generic/xilinx_ppc440_generic.c
@@ -0,0 +1,52 @@
+/*
+ * (C) Copyright 2008
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * This work has been supported by: QTechnology  http://qtec.com/
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <config.h>
+#include <common.h>
+#include <asm/processor.h>
+
+int __board_pre_init(void)
+{
+	return 0;
+}
+int board_pre_init(void) __attribute__((weak, alias("__board_pre_init")));
+
+int __checkboard(void)
+{
+	puts("Xilinx PPC440 Generic Board\n");
+	return 0;
+}
+int checkboard(void) __attribute__((weak, alias("__checkboard")));
+
+phys_size_t __initdram(int board_type)
+{
+	return get_ram_size(XPAR_DDR2_SDRAM_MEM_BASEADDR,
+			    CFG_SDRAM_SIZE_MB * 1024 * 1024);
+}
+phys_size_t initdram(int) __attribute__((weak, alias("__initdram")));
+
+void __get_sys_info(sys_info_t *sysInfo)
+{
+	sysInfo->freqProcessor = XPAR_CORE_CLOCK_FREQ_HZ;
+	sysInfo->freqPLB = XPAR_PLB_CLOCK_FREQ_HZ;
+	sysInfo->freqPCI = 0;
+
+	return;
+}
+void get_sys_info(sys_info_t *) __attribute__((weak, alias("__get_sys_info")));
diff --git a/board/xilinx/ppc440-generic/xparameters.h b/board/xilinx/ppc440-generic/xparameters.h
new file mode 100644
index 000000000..1992fff22
--- /dev/null
+++ b/board/xilinx/ppc440-generic/xparameters.h
@@ -0,0 +1,34 @@
+/*
+ * (C) Copyright 2008
+ * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ * This work has been supported by: QTechnology  http://qtec.com/
+ * based on xparameters-ml507.h by Xilinx
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef XPARAMETER_H
+#define XPARAMETER_H
+
+#define XPAR_DDR2_SDRAM_MEM_BASEADDR	0x00000000
+#define XPAR_IIC_EEPROM_BASEADDR	0x81600000
+#define XPAR_INTC_0_BASEADDR		0x81800000
+#define XPAR_UARTLITE_0_BASEADDR	0x84000000
+#define XPAR_FLASH_MEM0_BASEADDR	0xFE000000
+#define XPAR_PLB_CLOCK_FREQ_HZ		100000000
+#define XPAR_CORE_CLOCK_FREQ_HZ		400000000
+#define XPAR_INTC_MAX_NUM_INTR_INPUTS	13
+#define XPAR_UARTLITE_0_BAUDRATE	9600
+
+#endif
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index 15250d470..f1d76840f 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -60,8 +60,6 @@
 		       "SDRAM_" #mnemonic, SDRAM_##mnemonic, data);	\
 	} while (0)
 
-static inline void ppc4xx_ibm_ddr2_register_dump(void);
-
 #if defined(CONFIG_SPD_EEPROM)
 
 /*-----------------------------------------------------------------------------+
@@ -260,62 +258,19 @@ static void program_ecc_addr(unsigned long start_address,
 			     unsigned long num_bytes,
 			     unsigned long tlb_word2_i_value);
 #endif
+#if !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
 static void program_DQS_calibration(unsigned long *dimm_populated,
-				    unsigned char *iic0_dimm_addr,
-				    unsigned long num_dimm_banks);
+				unsigned char *iic0_dimm_addr,
+				unsigned long num_dimm_banks);
 #ifdef HARD_CODED_DQS /* calibration test with hardvalues */
 static void	test(void);
 #else
 static void	DQS_calibration_process(void);
 #endif
+#endif
 int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 void dcbz_area(u32 start_address, u32 num_bytes);
 
-static u32 mfdcr_any(u32 dcr)
-{
-	u32 val;
-
-	switch (dcr) {
-	case SDRAM_R0BAS + 0:
-		val = mfdcr(SDRAM_R0BAS + 0);
-		break;
-	case SDRAM_R0BAS + 1:
-		val = mfdcr(SDRAM_R0BAS + 1);
-		break;
-	case SDRAM_R0BAS + 2:
-		val = mfdcr(SDRAM_R0BAS + 2);
-		break;
-	case SDRAM_R0BAS + 3:
-		val = mfdcr(SDRAM_R0BAS + 3);
-		break;
-	default:
-		printf("DCR %d not defined in case statement!!!\n", dcr);
-		val = 0; /* just to satisfy the compiler */
-	}
-
-	return val;
-}
-
-static void mtdcr_any(u32 dcr, u32 val)
-{
-	switch (dcr) {
-	case SDRAM_R0BAS + 0:
-		mtdcr(SDRAM_R0BAS + 0, val);
-		break;
-	case SDRAM_R0BAS + 1:
-		mtdcr(SDRAM_R0BAS + 1, val);
-		break;
-	case SDRAM_R0BAS + 2:
-		mtdcr(SDRAM_R0BAS + 2, val);
-		break;
-	case SDRAM_R0BAS + 3:
-		mtdcr(SDRAM_R0BAS + 3, val);
-		break;
-	default:
-		printf("DCR %d not defined in case statement!!!\n", dcr);
-	}
-}
-
 static unsigned char spd_read(uchar chip, uint addr)
 {
 	unsigned char data[2];
@@ -609,7 +564,11 @@ phys_size_t initdram(int board_type)
 	/*------------------------------------------------------------------
 	 * DQS calibration.
 	 *-----------------------------------------------------------------*/
+#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
+	DQS_autocalibration();
+#else
 	program_DQS_calibration(dimm_populated, iic0_dimm_addr, num_dimm_banks);
+#endif
 
 #ifdef CONFIG_DDR_ECC
 	/*------------------------------------------------------------------
@@ -2329,18 +2288,6 @@ static unsigned long is_ecc_enabled(void)
 	return ecc;
 }
 
-static void blank_string(int size)
-{
-	int i;
-
-	for (i=0; i<size; i++)
-		putc('\b');
-	for (i=0; i<size; i++)
-		putc(' ');
-	for (i=0; i<size; i++)
-		putc('\b');
-}
-
 #ifdef CONFIG_DDR_ECC
 /*-----------------------------------------------------------------------------+
  * program_ecc.
@@ -2468,6 +2415,7 @@ static void program_ecc_addr(unsigned long start_address,
 }
 #endif
 
+#if !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
 /*-----------------------------------------------------------------------------+
  * program_DQS_calibration.
  *-----------------------------------------------------------------------------*/
@@ -3001,7 +2949,8 @@ static void test(void)
 		(ppcMfdcr_sdram(SDRAM_MCOPT1) & ~SDRAM_MCOPT1_MCHK_MASK)
 		| ecc_temp);
 }
-#endif
+#endif /* !HARD_CODED_DQS */
+#endif /* !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) */
 
 #else /* CONFIG_SPD_EEPROM */
 
@@ -3104,9 +3053,12 @@ phys_size_t initdram(int board_type)
 	/* Set Delay Control Registers */
 
 	mtsdram(SDRAM_DLCR, CFG_SDRAM0_DLCR);
+
+#if !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
 	mtsdram(SDRAM_RDCC, CFG_SDRAM0_RDCC);
 	mtsdram(SDRAM_RQDC, CFG_SDRAM0_RQDC);
 	mtsdram(SDRAM_RFDC, CFG_SDRAM0_RFDC);
+#endif /* !CONFIG_PPC4xx_DDR_AUTOCALIBRATION */
 
 	/*
 	 * Enable Controller by SDRAM0_MCOPT2[DCEN] = 1:
@@ -3115,18 +3067,98 @@ phys_size_t initdram(int board_type)
 	mfsdram(SDRAM_MCOPT2, val);
 	mtsdram(SDRAM_MCOPT2, val | SDRAM_MCOPT2_DCEN_ENABLE);
 
+#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+	/*------------------------------------------------------------------
+	 | DQS calibration.
+	 +-----------------------------------------------------------------*/
+	DQS_autocalibration();
+#endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */
+#endif /* CONFIG_PPC4xx_DDR_AUTOCALIBRATION */
+
 #if defined(CONFIG_DDR_ECC)
 	ecc_init(CFG_SDRAM_BASE, CFG_MBYTES_SDRAM << 20);
 #endif /* defined(CONFIG_DDR_ECC) */
 
 	ppc4xx_ibm_ddr2_register_dump();
+
+#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
+	/*
+	 * Clear potential errors resulting from auto-calibration.
+	 * If not done, then we could get an interrupt later on when
+	 * exceptions are enabled.
+	 */
+	set_mcsr(get_mcsr());
+#endif /* CONFIG_PPC4xx_DDR_AUTOCALIBRATION */
+
 #endif /* !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */
 
 	return (CFG_MBYTES_SDRAM << 20);
 }
 #endif /* CONFIG_SPD_EEPROM */
 
-static inline void ppc4xx_ibm_ddr2_register_dump(void)
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#if defined(CONFIG_440)
+u32 mfdcr_any(u32 dcr)
+{
+	u32 val;
+
+	switch (dcr) {
+	case SDRAM_R0BAS + 0:
+		val = mfdcr(SDRAM_R0BAS + 0);
+		break;
+	case SDRAM_R0BAS + 1:
+		val = mfdcr(SDRAM_R0BAS + 1);
+		break;
+	case SDRAM_R0BAS + 2:
+		val = mfdcr(SDRAM_R0BAS + 2);
+		break;
+	case SDRAM_R0BAS + 3:
+		val = mfdcr(SDRAM_R0BAS + 3);
+		break;
+	default:
+		printf("DCR %d not defined in case statement!!!\n", dcr);
+		val = 0; /* just to satisfy the compiler */
+	}
+
+	return val;
+}
+
+void mtdcr_any(u32 dcr, u32 val)
+{
+	switch (dcr) {
+	case SDRAM_R0BAS + 0:
+		mtdcr(SDRAM_R0BAS + 0, val);
+		break;
+	case SDRAM_R0BAS + 1:
+		mtdcr(SDRAM_R0BAS + 1, val);
+		break;
+	case SDRAM_R0BAS + 2:
+		mtdcr(SDRAM_R0BAS + 2, val);
+		break;
+	case SDRAM_R0BAS + 3:
+		mtdcr(SDRAM_R0BAS + 3, val);
+		break;
+	default:
+		printf("DCR %d not defined in case statement!!!\n", dcr);
+	}
+}
+#endif /* defined(CONFIG_440) */
+
+void blank_string(int size)
+{
+	int i;
+
+	for (i = 0; i < size; i++)
+		putc('\b');
+	for (i = 0; i < size; i++)
+		putc(' ');
+	for (i = 0; i < size; i++)
+		putc('\b');
+}
+#endif /* !defined(CONFIG_NAND_U_BOOT) &&  !defined(CONFIG_NAND_SPL) */
+
+inline void ppc4xx_ibm_ddr2_register_dump(void)
 {
 #if defined(DEBUG)
 	printf("\nPPC4xx IBM DDR2 Register Dump:\n");
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index 8a3833513..6d4d043e0 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -198,6 +198,7 @@
 #define BI_PHYMODE_RMII  8
 #endif
 #endif
+#define BI_PHYMODE_SGMII 9
 
 #if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
     defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
@@ -216,6 +217,52 @@
 #define MAL_RX_CHAN_MUL	1
 #endif
 
+/*--------------------------------------------------------------------+
+ * Fixed PHY (PHY-less) support for Ethernet Ports.
+ *--------------------------------------------------------------------*/
+
+/*
+ * Some boards do not have a PHY for each ethernet port. These ports
+ * are known as Fixed PHY (or PHY-less) ports. For such ports, set
+ * the appropriate CONFIG_PHY_ADDR equal to CONFIG_FIXED_PHY and
+ * then define CFG_FIXED_PHY_PORTS to define what the speed and
+ * duplex should be for these ports in the board configuration
+ * file.
+ *
+ * For Example:
+ *     #define CONFIG_FIXED_PHY   0xFFFFFFFF
+ *
+ *     #define CONFIG_PHY_ADDR    CONFIG_FIXED_PHY
+ *     #define CONFIG_PHY1_ADDR   1
+ *     #define CONFIG_PHY2_ADDR   CONFIG_FIXED_PHY
+ *     #define CONFIG_PHY3_ADDR   3
+ *
+ *     #define CFG_FIXED_PHY_PORT(devnum,speed,duplex) \
+ *                     {devnum, speed, duplex},
+ *
+ *     #define CFG_FIXED_PHY_PORTS \
+ *                     CFG_FIXED_PHY_PORT(0,1000,FULL) \
+ *                     CFG_FIXED_PHY_PORT(2,100,HALF)
+ */
+
+#ifndef CONFIG_FIXED_PHY
+#define CONFIG_FIXED_PHY	0xFFFFFFFF /* Fixed PHY (PHY-less) */
+#endif
+
+#ifndef CFG_FIXED_PHY_PORTS
+#define CFG_FIXED_PHY_PORTS	/* default is an empty array */
+#endif
+
+struct fixed_phy_port {
+	unsigned int devnum;	/* ethernet port */
+	unsigned int speed;	/* specified speed 10,100 or 1000 */
+	unsigned int duplex;	/* specified duplex FULL or HALF */
+};
+
+static const struct fixed_phy_port fixed_phy_port[] = {
+	CFG_FIXED_PHY_PORTS	/* defined in board configuration file */
+};
+
 /*-----------------------------------------------------------------------------+
  * Global variables. TX and RX descriptors and buffers.
  *-----------------------------------------------------------------------------*/
@@ -611,8 +658,17 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
 
 #if defined(CONFIG_460EX)
 	mode = 9;
+	mfsdr(SDR0_ETH_CFG, eth_cfg);
+	if (((eth_cfg & SDR0_ETH_CFG_SGMII0_ENABLE) > 0) &&
+	    ((eth_cfg & SDR0_ETH_CFG_SGMII1_ENABLE) > 0))
+		mode = 11; /* config SGMII */
 #else
 	mode = 10;
+	mfsdr(SDR0_ETH_CFG, eth_cfg);
+	if (((eth_cfg & SDR0_ETH_CFG_SGMII0_ENABLE) > 0) &&
+	    ((eth_cfg & SDR0_ETH_CFG_SGMII1_ENABLE) > 0) &&
+	    ((eth_cfg & SDR0_ETH_CFG_SGMII2_ENABLE) > 0))
+		mode = 12; /* config SGMII */
 #endif
 
 	/* TODO:
@@ -635,6 +691,8 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
 	/*
 	 * Right now only 2*RGMII is supported. Please extend when needed.
 	 * sr - 2008-02-19
+	 * Add SGMII support.
+	 * vg - 2008-07-28
 	 */
 	switch (mode) {
 	case 1:
@@ -761,6 +819,20 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis)
 		bis->bi_phymode[2] = BI_PHYMODE_RGMII;
 		bis->bi_phymode[3] = BI_PHYMODE_RGMII;
 		break;
+	case 11:
+		/* 2 SGMII - 460EX */
+		bis->bi_phymode[0] = BI_PHYMODE_SGMII;
+		bis->bi_phymode[1] = BI_PHYMODE_SGMII;
+		bis->bi_phymode[2] = BI_PHYMODE_NONE;
+		bis->bi_phymode[3] = BI_PHYMODE_NONE;
+		break;
+	case 12:
+		/* 3 SGMII - 460GT */
+		bis->bi_phymode[0] = BI_PHYMODE_SGMII;
+		bis->bi_phymode[1] = BI_PHYMODE_SGMII;
+		bis->bi_phymode[2] = BI_PHYMODE_SGMII;
+		bis->bi_phymode[3] = BI_PHYMODE_NONE;
+		break;
 	default:
 		break;
 	}
@@ -945,9 +1017,50 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 	out_be32((void *)EMAC_M1 + hw_p->hw_addr, mode_reg);
 #endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */
 
+#if defined(CONFIG_GPCS_PHY_ADDR) || defined(CONFIG_GPCS_PHY1_ADDR) || \
+    defined(CONFIG_GPCS_PHY2_ADDR) || defined(CONFIG_GPCS_PHY3_ADDR)
+	if (bis->bi_phymode[devnum] == BI_PHYMODE_SGMII) {
+		/*
+		 * In SGMII mode, GPCS access is needed for
+		 * communication with the internal SGMII SerDes.
+		 */
+		switch (devnum) {
+#if defined(CONFIG_GPCS_PHY_ADDR)
+		case 0:
+			reg = CONFIG_GPCS_PHY_ADDR;
+			break;
+#endif
+#if defined(CONFIG_GPCS_PHY1_ADDR)
+		case 1:
+			reg = CONFIG_GPCS_PHY1_ADDR;
+			break;
+#endif
+#if defined(CONFIG_GPCS_PHY2_ADDR)
+		case 2:
+			reg = CONFIG_GPCS_PHY2_ADDR;
+			break;
+#endif
+#if defined(CONFIG_GPCS_PHY3_ADDR)
+		case 3:
+			reg = CONFIG_GPCS_PHY3_ADDR;
+			break;
+#endif
+		}
+
+		mode_reg = in_be32((void *)EMAC_M1 + hw_p->hw_addr);
+		mode_reg |= EMAC_M1_MF_1000GPCS | EMAC_M1_IPPA_SET(reg);
+		out_be32((void *)EMAC_M1 + hw_p->hw_addr, mode_reg);
+
+		/* Configure GPCS interface to recommended setting for SGMII */
+		miiphy_reset(dev->name, reg);
+		miiphy_write(dev->name, reg, 0x04, 0x8120); /* AsymPause, FDX */
+		miiphy_write(dev->name, reg, 0x07, 0x2801); /* msg_pg, toggle */
+		miiphy_write(dev->name, reg, 0x00, 0x0140); /* 1Gbps, FDX     */
+	}
+#endif /* defined(CONFIG_GPCS_PHY_ADDR) */
+
 	/* wait for PHY to complete auto negotiation */
 	reg_short = 0;
-#ifndef CONFIG_CS8952_PHY
 	switch (devnum) {
 	case 0:
 		reg = CONFIG_PHY_ADDR;
@@ -974,6 +1087,9 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 
 	bis->bi_phynum[devnum] = reg;
 
+	if (reg == CONFIG_FIXED_PHY)
+		goto get_speed;
+
 #if defined(CONFIG_PHY_RESET)
 	/*
 	 * Reset the phy, only if its the first time through
@@ -986,6 +1102,27 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 		miiphy_write (dev->name, reg, 0x09, 0x0e00);
 		miiphy_write (dev->name, reg, 0x04, 0x01e1);
 #endif
+#if defined(CONFIG_M88E1112_PHY)
+		if (bis->bi_phymode[devnum] == BI_PHYMODE_SGMII) {
+			/*
+			 * Marvell 88E1112 PHY needs to have the SGMII MAC
+			 * interace (page 2) properly configured to
+			 * communicate with the 460EX/GT GPCS interface.
+			 */
+
+			/* Set access to Page 2 */
+			miiphy_write(dev->name, reg, 0x16, 0x0002);
+
+			miiphy_write(dev->name, reg, 0x00, 0x0040); /* 1Gbps */
+			miiphy_read(dev->name, reg, 0x1a, &reg_short);
+			reg_short |= 0x8000; /* bypass Auto-Negotiation */
+			miiphy_write(dev->name, reg, 0x1a, reg_short);
+			miiphy_reset(dev->name, reg); /* reset MAC interface */
+
+			/* Reset access to Page 0 */
+			miiphy_write(dev->name, reg, 0x16, 0x0000);
+		}
+#endif /* defined(CONFIG_M88E1112_PHY) */
 		miiphy_reset (dev->name, reg);
 
 #if defined(CONFIG_440GX) || \
@@ -1022,7 +1159,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 			miiphy_write (dev->name, reg, 0x1f, 0x0000);
 			/* end Vitesse/Cicada errata */
 		}
-#endif
+#endif /* defined(CONFIG_CIS8201_PHY) */
 
 #if defined(CONFIG_ET1011C_PHY)
 		/*
@@ -1041,9 +1178,9 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 
 			miiphy_write(dev->name, reg, 0x1c, 0x74f0);
 		}
-#endif
+#endif /* defined(CONFIG_ET1011C_PHY) */
 
-#endif
+#endif /* defined(CONFIG_440GX) ... */
 		/* Start/Restart autonegotiation */
 		phy_setup_aneg (dev->name, reg);
 		udelay (1000);
@@ -1073,15 +1210,30 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
 			}
 			udelay (1000);	/* 1 ms */
 			miiphy_read (dev->name, reg, PHY_BMSR, &reg_short);
-
 		}
 		puts (" done\n");
 		udelay (500000);	/* another 500 ms (results in faster booting) */
 	}
-#endif /* #ifndef CONFIG_CS8952_PHY */
 
-	speed = miiphy_speed (dev->name, reg);
-	duplex = miiphy_duplex (dev->name, reg);
+get_speed:
+	if (reg == CONFIG_FIXED_PHY) {
+		for (i = 0; i < ARRAY_SIZE(fixed_phy_port); i++) {
+			if (devnum == fixed_phy_port[i].devnum) {
+				speed = fixed_phy_port[i].speed;
+				duplex = fixed_phy_port[i].duplex;
+				break;
+			}
+		}
+
+		if (i == ARRAY_SIZE(fixed_phy_port)) {
+			printf("ERROR: PHY (%s) not configured correctly!\n",
+				dev->name);
+			return -1;
+		}
+	} else {
+		speed = miiphy_speed(dev->name, reg);
+		duplex = miiphy_duplex(dev->name, reg);
+	}
 
 	if (hw_p->print_speed) {
 		hw_p->print_speed = 0;
diff --git a/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c b/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
new file mode 100644
index 000000000..83b9883a7
--- /dev/null
+++ b/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
@@ -0,0 +1,1212 @@
+/*
+ * cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
+ * This SPD SDRAM detection code supports AMCC PPC44x cpu's with a
+ * DDR2 controller (non Denali Core). Those currently are:
+ *
+ * 405:		405EX
+ * 440/460:	440SP/440SPe/460EX/460GT/460SX
+ *
+ * (C) Copyright 2008 Applied Micro Circuits Corporation
+ * Adam Graham  <agraham@amcc.com>
+ *
+ * (C) Copyright 2007-2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * COPYRIGHT   AMCC   CORPORATION 2004
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/* define DEBUG for debugging output (obviously ;-)) */
+#undef DEBUG
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
+
+/*
+ * Only compile the DDR auto-calibration code for NOR boot and
+ * not for NAND boot (NAND SPL and NAND U-Boot - NUB)
+ */
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+
+#define MAXBXCF			4
+#define SDRAM_RXBAS_SHIFT_1M	20
+
+#if defined(CFG_DECREMENT_PATTERNS)
+#define NUMMEMTESTS		24
+#else
+#define NUMMEMTESTS		8
+#endif /* CFG_DECREMENT_PATTERNS */
+#define NUMLOOPS		1	/* configure as you deem approporiate */
+#define NUMMEMWORDS		16
+
+/* Private Structure Definitions */
+
+struct autocal_regs {
+	u32 rffd;
+	u32 rqfd;
+};
+
+struct ddrautocal {
+	u32 rffd;
+	u32 rffd_min;
+	u32 rffd_max;
+	u32 rffd_size;
+	u32 rqfd;
+	u32 rqfd_size;
+	u32 rdcc;
+	u32 flags;
+};
+
+struct sdram_timing {
+	u32 wrdtr;
+	u32 clktr;
+};
+
+struct sdram_timing_clks {
+	u32 wrdtr;
+	u32 clktr;
+	u32 rdcc;
+	u32 flags;
+};
+
+struct autocal_clks {
+	struct sdram_timing_clks clocks;
+	struct ddrautocal	 autocal;
+};
+
+/*--------------------------------------------------------------------------+
+ * Prototypes
+ *--------------------------------------------------------------------------*/
+#if defined(CONFIG_PPC4xx_DDR_METHOD_A)
+static u32 DQS_calibration_methodA(struct ddrautocal *);
+static u32 program_DQS_calibration_methodA(struct ddrautocal *);
+#else
+static u32 DQS_calibration_methodB(struct ddrautocal *);
+static u32 program_DQS_calibration_methodB(struct ddrautocal *);
+#endif
+static int short_mem_test(u32 *);
+
+/*
+ * To provide an interface for board specific config values in this common
+ * DDR setup code, we implement he "weak" default functions here. They return
+ * the default value back to the caller.
+ *
+ * Please see include/configs/yucca.h for an example fora board specific
+ * implementation.
+ */
+
+#if !defined(CONFIG_SPD_EEPROM)
+u32 __ddr_wrdtr(u32 default_val)
+{
+	return default_val;
+}
+u32 ddr_wrdtr(u32) __attribute__((weak, alias("__ddr_wrdtr")));
+
+u32 __ddr_clktr(u32 default_val)
+{
+	return default_val;
+}
+u32 ddr_clktr(u32) __attribute__((weak, alias("__ddr_clktr")));
+
+/*
+ * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
+ */
+void __spd_ddr_init_hang(void)
+{
+	hang();
+}
+void
+spd_ddr_init_hang(void) __attribute__((weak, alias("__spd_ddr_init_hang")));
+#endif /* defined(CONFIG_SPD_EEPROM) */
+
+ulong __ddr_scan_option(ulong default_val)
+{
+	return default_val;
+}
+ulong ddr_scan_option(ulong) __attribute__((weak, alias("__ddr_scan_option")));
+
+static u32 *get_membase(int bxcr_num)
+{
+	ulong bxcf;
+	u32 *membase;
+
+#if defined(SDRAM_R0BAS)
+	/* BAS from Memory Queue rank reg. */
+	membase =
+	    (u32 *)(SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+bxcr_num)));
+	bxcf = 0;	/* just to satisfy the compiler */
+#else
+	/* BAS from SDRAM_MBxCF mem rank reg. */
+	mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf);
+	membase = (u32 *)((bxcf & 0xfff80000) << 3);
+#endif
+
+	return membase;
+}
+
+static inline void ecc_clear_status_reg(void)
+{
+	mtsdram(SDRAM_ECCCR, 0xffffffff);
+#if defined(SDRAM_R0BAS)
+	mtdcr(SDRAM_ERRSTATLL, 0xffffffff);
+#endif
+}
+
+static int ecc_check_status_reg(void)
+{
+	u32 ecc_status;
+
+	/*
+	 * Compare suceeded, now check
+	 * if got ecc error. If got an
+	 * ecc error, then don't count
+	 * this as a passing value
+	 */
+	mfsdram(SDRAM_ECCCR, ecc_status);
+	if (ecc_status != 0x00000000) {
+		/* clear on error */
+		ecc_clear_status_reg();
+		/* ecc check failure */
+		return 0;
+	}
+	ecc_clear_status_reg();
+	sync();
+
+	return 1;
+}
+
+/* return 1 if passes, 0 if fail */
+static int short_mem_test(u32 *base_address)
+{
+	int i, j, l;
+	u32 ecc_mode = 0;
+
+	ulong test[NUMMEMTESTS][NUMMEMWORDS] = {
+	/* 0 */	{0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+		 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+		 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+		 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF},
+	/* 1 */	{0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+		 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+		 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+		 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000},
+	/* 2 */	{0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+		 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+		 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+		 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555},
+	/* 3 */	{0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+		 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+		 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+		 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA},
+	/* 4 */	{0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+		 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+		 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+		 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A},
+	/* 5 */	{0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+		 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+		 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+		 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5},
+	/* 6 */	{0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+		 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+		 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+		 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA},
+	/* 7 */	{0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+		 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+		 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+		 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55},
+
+#if defined(CFG_DECREMENT_PATTERNS)
+	/* 8 */	{0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+		 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+		 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
+		 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff},
+	/* 9 */	{0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe,
+		 0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe,
+		 0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe,
+		 0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe},
+	/* 10 */{0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd,
+		 0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd,
+		 0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd,
+		 0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd},
+	/* 11 */{0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc,
+		 0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc,
+		 0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc,
+		 0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc},
+	/* 12 */{0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb,
+		 0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb,
+		 0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb,
+		 0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb},
+	/* 13 */{0xfffafffa, 0xfffafffa, 0xfffffffa, 0xfffafffa,
+		 0xfffafffa, 0xfffafffa, 0xfffafffa, 0xfffafffa,
+		 0xfffafffa, 0xfffafffa, 0xfffafffa, 0xfffafffa,
+		 0xfffafffa, 0xfffafffa, 0xfffafffa, 0xfffafffa},
+	/* 14 */{0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9,
+		 0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9,
+		 0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9,
+		 0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9},
+	/* 15 */{0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8,
+		 0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8,
+		 0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8,
+		 0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8},
+	/* 16 */{0xfff7fff7, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7,
+		 0xfff7fff7, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7,
+		 0xfff7fff7, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7,
+		 0xfff7ffff, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7},
+	/* 17 */{0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7,
+		 0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7,
+		 0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7,
+		 0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7},
+	/* 18 */{0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5,
+		 0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5,
+		 0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5,
+		 0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5},
+	/* 19 */{0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4,
+		 0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4,
+		 0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4,
+		 0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4},
+	/* 20 */{0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3,
+		 0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3,
+		 0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3,
+		 0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3},
+	/* 21 */{0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2,
+		 0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2,
+		 0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2,
+		 0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2},
+	/* 22 */{0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1,
+		 0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1,
+		 0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1,
+		 0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1},
+	/* 23 */{0xfff0fff0, 0xfff0fff0, 0xfff0fff0, 0xfff0fff0,
+		 0xfff0fff0, 0xfff0fff0, 0xfff0fff0, 0xfff0fff0,
+		 0xfff0fff0, 0xfff0fff0, 0xfff0fff0, 0xfff0fff0,
+		 0xfff0fff0, 0xfff0fffe, 0xfff0fff0, 0xfff0fff0},
+#endif /* CFG_DECREMENT_PATTERNS */
+								 };
+
+	mfsdram(SDRAM_MCOPT1, ecc_mode);
+	if ((ecc_mode & SDRAM_MCOPT1_MCHK_CHK_REP) ==
+						SDRAM_MCOPT1_MCHK_CHK_REP) {
+		ecc_clear_status_reg();
+		sync();
+		ecc_mode = 1;
+	} else {
+		ecc_mode = 0;
+	}
+
+	/*
+	 * Run the short memory test.
+	 */
+	for (i = 0; i < NUMMEMTESTS; i++) {
+		for (j = 0; j < NUMMEMWORDS; j++) {
+			base_address[j] = test[i][j];
+			ppcDcbf((ulong)&(base_address[j]));
+		}
+		sync();
+		for (l = 0; l < NUMLOOPS; l++) {
+			for (j = 0; j < NUMMEMWORDS; j++) {
+				if (base_address[j] != test[i][j]) {
+					ppcDcbf((u32)&(base_address[j]));
+					return 0;
+				} else {
+					if (ecc_mode) {
+						if (!ecc_check_status_reg())
+							return 0;
+					}
+				}
+				ppcDcbf((u32)&(base_address[j]));
+			} /* for (j = 0; j < NUMMEMWORDS; j++) */
+			sync();
+		} /* for (l=0; l<NUMLOOPS; l++) */
+	}
+
+	return 1;
+}
+
+#if defined(CONFIG_PPC4xx_DDR_METHOD_A)
+/*-----------------------------------------------------------------------------+
+| program_DQS_calibration_methodA.
++-----------------------------------------------------------------------------*/
+static u32 program_DQS_calibration_methodA(struct ddrautocal *ddrcal)
+{
+	u32 pass_result = 0;
+
+#ifdef DEBUG
+	ulong temp;
+
+	mfsdram(SDRAM_RDCC, temp);
+	debug("<%s>SDRAM_RDCC=0x%08x\n", __func__, temp);
+#endif
+
+	pass_result = DQS_calibration_methodA(ddrcal);
+
+	return pass_result;
+}
+
+/*
+ * DQS_calibration_methodA()
+ *
+ * Autocalibration Method A
+ *
+ *  ARRAY [Entire DQS Range] DQS_Valid_Window ;    initialized to all zeros
+ *  ARRAY [Entire FDBK Range] FDBK_Valid_Window;   initialized to all zeros
+ *  MEMWRITE(addr, expected_data);
+ *  for (i = 0; i < Entire DQS Range; i++) {       RQDC.RQFD
+ *      for (j = 0; j < Entire FDBK Range; j++) {  RFDC.RFFD
+ *         MEMREAD(addr, actual_data);
+ *         if (actual_data == expected_data) {
+ *             DQS_Valid_Window[i] = 1;            RQDC.RQFD
+ *             FDBK_Valid_Window[i][j] = 1;        RFDC.RFFD
+ *         }
+ *      }
+ *  }
+ */
+static u32 DQS_calibration_methodA(struct ddrautocal *cal)
+{
+	ulong rfdc_reg;
+	ulong rffd;
+
+	ulong rqdc_reg;
+	ulong rqfd;
+
+	u32 *membase;
+	ulong bxcf;
+	int rqfd_average;
+	int bxcr_num;
+	int rffd_average;
+	int pass;
+	u32 passed = 0;
+
+	int in_window;
+	struct autocal_regs curr_win_min;
+	struct autocal_regs curr_win_max;
+	struct autocal_regs best_win_min;
+	struct autocal_regs best_win_max;
+	struct autocal_regs loop_win_min;
+	struct autocal_regs loop_win_max;
+
+#ifdef DEBUG
+	ulong temp;
+#endif
+	ulong rdcc;
+
+	char slash[] = "\\|/-\\|/-";
+	int loopi = 0;
+
+	/* start */
+	in_window = 0;
+
+	memset(&curr_win_min, 0, sizeof(curr_win_min));
+	memset(&curr_win_max, 0, sizeof(curr_win_max));
+	memset(&best_win_min, 0, sizeof(best_win_min));
+	memset(&best_win_max, 0, sizeof(best_win_max));
+	memset(&loop_win_min, 0, sizeof(loop_win_min));
+	memset(&loop_win_max, 0, sizeof(loop_win_max));
+
+	rdcc = 0;
+
+	/*
+	 * Program RDCC register
+	 * Read sample cycle auto-update enable
+	 */
+	mtsdram(SDRAM_RDCC, SDRAM_RDCC_RDSS_T1 | SDRAM_RDCC_RSAE_ENABLE);
+
+#ifdef DEBUG
+	mfsdram(SDRAM_RDCC, temp);
+	debug("<%s>SDRAM_RDCC=0x%x\n", __func__, temp);
+	mfsdram(SDRAM_RTSR, temp);
+	debug("<%s>SDRAM_RTSR=0x%x\n", __func__, temp);
+	mfsdram(SDRAM_FCSR, temp);
+	debug("<%s>SDRAM_FCSR=0x%x\n", __func__, temp);
+#endif
+
+	/*
+	 * Program RQDC register
+	 * Internal DQS delay mechanism enable
+	 */
+	mtsdram(SDRAM_RQDC,
+		SDRAM_RQDC_RQDE_ENABLE | SDRAM_RQDC_RQFD_ENCODE(0x00));
+
+#ifdef DEBUG
+	mfsdram(SDRAM_RQDC, temp);
+	debug("<%s>SDRAM_RQDC=0x%x\n", __func__, temp);
+#endif
+
+	/*
+	 * Program RFDC register
+	 * Set Feedback Fractional Oversample
+	 * Auto-detect read sample cycle enable
+	 */
+	mtsdram(SDRAM_RFDC, SDRAM_RFDC_ARSE_ENABLE |
+		SDRAM_RFDC_RFOS_ENCODE(0) | SDRAM_RFDC_RFFD_ENCODE(0));
+
+#ifdef DEBUG
+	mfsdram(SDRAM_RFDC, temp);
+	debug("<%s>SDRAM_RFDC=0x%x\n", __func__, temp);
+#endif
+
+	putc(' ');
+	for (rqfd = 0; rqfd <= SDRAM_RQDC_RQFD_MAX; rqfd++) {
+
+		mfsdram(SDRAM_RQDC, rqdc_reg);
+		rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK);
+		mtsdram(SDRAM_RQDC, rqdc_reg | SDRAM_RQDC_RQFD_ENCODE(rqfd));
+
+		putc('\b');
+		putc(slash[loopi++ % 8]);
+
+		curr_win_min.rffd = 0;
+		curr_win_max.rffd = 0;
+		in_window = 0;
+
+		for (rffd = 0, pass = 0; rffd <= SDRAM_RFDC_RFFD_MAX; rffd++) {
+			mfsdram(SDRAM_RFDC, rfdc_reg);
+			rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK);
+			mtsdram(SDRAM_RFDC,
+				    rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd));
+
+			for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) {
+				mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf);
+
+				/* Banks enabled */
+				if (bxcf & SDRAM_BXCF_M_BE_MASK) {
+					/* Bank is enabled */
+					membase = get_membase(bxcr_num);
+					pass = short_mem_test(membase);
+				} /* if bank enabled */
+			} /* for bxcr_num */
+
+			/* If this value passed update RFFD windows */
+			if (pass && !in_window) { /* at the start of window */
+				in_window = 1;
+				curr_win_min.rffd = curr_win_max.rffd = rffd;
+				curr_win_min.rqfd = curr_win_max.rqfd = rqfd;
+				mfsdram(SDRAM_RDCC, rdcc); /*record this value*/
+			} else if (!pass && in_window) { /* at end of window */
+				in_window = 0;
+			} else if (pass && in_window) { /* within the window */
+				curr_win_max.rffd = rffd;
+				curr_win_max.rqfd = rqfd;
+			}
+			/* else if (!pass && !in_window)
+				skip - no pass, not currently in a window */
+
+			if (in_window) {
+				if ((curr_win_max.rffd - curr_win_min.rffd) >
+				    (best_win_max.rffd - best_win_min.rffd)) {
+					best_win_min.rffd = curr_win_min.rffd;
+					best_win_max.rffd = curr_win_max.rffd;
+
+					best_win_min.rqfd = curr_win_min.rqfd;
+					best_win_max.rqfd = curr_win_max.rqfd;
+					cal->rdcc	  = rdcc;
+				}
+				passed = 1;
+			}
+		} /* RFDC.RFFD */
+
+		/*
+		 * save-off the best window results of the RFDC.RFFD
+		 * for this RQDC.RQFD setting
+		 */
+		/*
+		 * if (just ended RFDC.RFDC loop pass window) >
+		 *	(prior RFDC.RFFD loop pass window)
+		 */
+		if ((best_win_max.rffd - best_win_min.rffd) >
+		    (loop_win_max.rffd - loop_win_min.rffd)) {
+			loop_win_min.rffd = best_win_min.rffd;
+			loop_win_max.rffd = best_win_max.rffd;
+			loop_win_min.rqfd = rqfd;
+			loop_win_max.rqfd = rqfd;
+			debug("RQFD.min 0x%08x, RQFD.max 0x%08x, "
+			      "RFFD.min 0x%08x, RFFD.max 0x%08x\n",
+					loop_win_min.rqfd, loop_win_max.rqfd,
+					loop_win_min.rffd, loop_win_max.rffd);
+		}
+	} /* RQDC.RQFD */
+
+	putc('\b');
+
+	debug("\n");
+
+	if ((loop_win_min.rffd == 0) && (loop_win_max.rffd == 0) &&
+	    (best_win_min.rffd == 0) && (best_win_max.rffd == 0) &&
+	    (best_win_min.rqfd == 0) && (best_win_max.rqfd == 0)) {
+		passed = 0;
+	}
+
+	/*
+	 * Need to program RQDC before RFDC.
+	 */
+	debug("<%s> RQFD Min: 0x%x\n", __func__, loop_win_min.rqfd);
+	debug("<%s> RQFD Max: 0x%x\n", __func__, loop_win_max.rqfd);
+	rqfd_average = loop_win_max.rqfd;
+
+	if (rqfd_average < 0)
+		rqfd_average = 0;
+
+	if (rqfd_average > SDRAM_RQDC_RQFD_MAX)
+		rqfd_average = SDRAM_RQDC_RQFD_MAX;
+
+	debug("<%s> RFFD average: 0x%08x\n", __func__, rqfd_average);
+	mtsdram(SDRAM_RQDC, (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
+				SDRAM_RQDC_RQFD_ENCODE(rqfd_average));
+
+	debug("<%s> RFFD Min: 0x%08x\n", __func__, loop_win_min.rffd);
+	debug("<%s> RFFD Max: 0x%08x\n", __func__, loop_win_max.rffd);
+	rffd_average = ((loop_win_min.rffd + loop_win_max.rffd) / 2);
+
+	if (rffd_average < 0)
+		rffd_average = 0;
+
+	if (rffd_average > SDRAM_RFDC_RFFD_MAX)
+		rffd_average = SDRAM_RFDC_RFFD_MAX;
+
+	debug("<%s> RFFD average: 0x%08x\n", __func__, rffd_average);
+	mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average));
+
+	/* if something passed, then return the size of the largest window */
+	if (passed != 0) {
+		passed		= loop_win_max.rffd - loop_win_min.rffd;
+		cal->rqfd	= rqfd_average;
+		cal->rffd	= rffd_average;
+		cal->rffd_min	= loop_win_min.rffd;
+		cal->rffd_max	= loop_win_max.rffd;
+	}
+
+	return (u32)passed;
+}
+
+#else	/* !defined(CONFIG_PPC4xx_DDR_METHOD_A) */
+
+/*-----------------------------------------------------------------------------+
+| program_DQS_calibration_methodB.
++-----------------------------------------------------------------------------*/
+static u32 program_DQS_calibration_methodB(struct ddrautocal *ddrcal)
+{
+	u32 pass_result = 0;
+
+#ifdef DEBUG
+	ulong temp;
+#endif
+
+	/*
+	 * Program RDCC register
+	 * Read sample cycle auto-update enable
+	 */
+	mtsdram(SDRAM_RDCC, SDRAM_RDCC_RDSS_T2 | SDRAM_RDCC_RSAE_ENABLE);
+
+#ifdef DEBUG
+	mfsdram(SDRAM_RDCC, temp);
+	debug("<%s>SDRAM_RDCC=0x%08x\n", __func__, temp);
+#endif
+
+	/*
+	 * Program RQDC register
+	 * Internal DQS delay mechanism enable
+	 */
+	mtsdram(SDRAM_RQDC,
+#if defined(CONFIG_DDR_RQDC_START_VAL)
+			SDRAM_RQDC_RQDE_ENABLE |
+			    SDRAM_RQDC_RQFD_ENCODE(CONFIG_DDR_RQDC_START_VAL));
+#else
+			SDRAM_RQDC_RQDE_ENABLE | SDRAM_RQDC_RQFD_ENCODE(0x38));
+#endif
+
+#ifdef DEBUG
+	mfsdram(SDRAM_RQDC, temp);
+	debug("<%s>SDRAM_RQDC=0x%08x\n", __func__, temp);
+#endif
+
+	/*
+	 * Program RFDC register
+	 * Set Feedback Fractional Oversample
+	 * Auto-detect read sample cycle enable
+	 */
+	mtsdram(SDRAM_RFDC,	SDRAM_RFDC_ARSE_ENABLE |
+				SDRAM_RFDC_RFOS_ENCODE(0) |
+				SDRAM_RFDC_RFFD_ENCODE(0));
+
+#ifdef DEBUG
+	mfsdram(SDRAM_RFDC, temp);
+	debug("<%s>SDRAM_RFDC=0x%08x\n", __func__, temp);
+#endif
+
+	pass_result = DQS_calibration_methodB(ddrcal);
+
+	return pass_result;
+}
+
+/*
+ * DQS_calibration_methodB()
+ *
+ * Autocalibration Method B
+ *
+ * ARRAY [Entire DQS Range] DQS_Valid_Window ;       initialized to all zeros
+ * ARRAY [Entire Feedback Range] FDBK_Valid_Window;  initialized to all zeros
+ * MEMWRITE(addr, expected_data);
+ * Initialialize the DQS delay to 80 degrees (MCIF0_RRQDC[RQFD]=0x38).
+ *
+ *  for (j = 0; j < Entire Feedback Range; j++) {
+ *      MEMREAD(addr, actual_data);
+ *       if (actual_data == expected_data) {
+ *           FDBK_Valid_Window[j] = 1;
+ *       }
+ * }
+ *
+ * Set MCIF0_RFDC[RFFD] to the middle of the FDBK_Valid_Window.
+ *
+ * for (i = 0; i < Entire DQS Range; i++) {
+ *     MEMREAD(addr, actual_data);
+ *     if (actual_data == expected_data) {
+ *         DQS_Valid_Window[i] = 1;
+ *      }
+ * }
+ *
+ * Set MCIF0_RRQDC[RQFD] to the middle of the DQS_Valid_Window.
+ */
+/*-----------------------------------------------------------------------------+
+| DQS_calibration_methodB.
++-----------------------------------------------------------------------------*/
+static u32 DQS_calibration_methodB(struct ddrautocal *cal)
+{
+	ulong rfdc_reg;
+	ulong rffd;
+
+	ulong rqdc_reg;
+	ulong rqfd;
+
+	ulong rdcc;
+
+	u32 *membase;
+	ulong bxcf;
+	int rqfd_average;
+	int bxcr_num;
+	int rffd_average;
+	int pass;
+	uint passed = 0;
+
+	int in_window;
+	u32 curr_win_min, curr_win_max;
+	u32 best_win_min, best_win_max;
+	u32 size = 0;
+
+	/*------------------------------------------------------------------
+	 | Test to determine the best read clock delay tuning bits.
+	 |
+	 | Before the DDR controller can be used, the read clock delay needs to
+	 | be set.  This is SDRAM_RQDC[RQFD] and SDRAM_RFDC[RFFD].
+	 | This value cannot be hardcoded into the program because it changes
+	 | depending on the board's setup and environment.
+	 | To do this, all delay values are tested to see if they
+	 | work or not.  By doing this, you get groups of fails with groups of
+	 | passing values.  The idea is to find the start and end of a passing
+	 | window and take the center of it to use as the read clock delay.
+	 |
+	 | A failure has to be seen first so that when we hit a pass, we know
+	 | that it is truely the start of the window.  If we get passing values
+	 | to start off with, we don't know if we are at the start of the window
+	 |
+	 | The code assumes that a failure will always be found.
+	 | If a failure is not found, there is no easy way to get the middle
+	 | of the passing window.  I guess we can pretty much pick any value
+	 | but some values will be better than others.  Since the lowest speed
+	 | we can clock the DDR interface at is 200 MHz (2x 100 MHz PLB speed),
+	 | from experimentation it is safe to say you will always have a failure
+	 +-----------------------------------------------------------------*/
+
+	debug("\n\n");
+
+	in_window = 0;
+	rdcc = 0;
+
+	curr_win_min = curr_win_max = 0;
+	best_win_min = best_win_max = 0;
+	for (rffd = 0; rffd <= SDRAM_RFDC_RFFD_MAX; rffd++) {
+		mfsdram(SDRAM_RFDC, rfdc_reg);
+		rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK);
+		mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd));
+
+		pass = 1;
+		for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) {
+			mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf);
+
+			/* Banks enabled */
+			if (bxcf & SDRAM_BXCF_M_BE_MASK) {
+				/* Bank is enabled */
+				membase = get_membase(bxcr_num);
+				pass &= short_mem_test(membase);
+			} /* if bank enabled */
+		} /* for bxcf_num */
+
+		/* If this value passed */
+		if (pass && !in_window) {	/* start of passing window */
+			in_window = 1;
+			curr_win_min = curr_win_max = rffd;
+			mfsdram(SDRAM_RDCC, rdcc);	/* record this value */
+		} else if (!pass && in_window) {	/* end passing window */
+			in_window = 0;
+		} else if (pass && in_window) {	/* within the passing window */
+			curr_win_max = rffd;
+		}
+
+		if (in_window) {
+			if ((curr_win_max - curr_win_min) >
+			    (best_win_max - best_win_min)) {
+				best_win_min = curr_win_min;
+				best_win_max = curr_win_max;
+				cal->rdcc    = rdcc;
+			}
+			passed = 1;
+		}
+	} /* for rffd */
+
+	if ((best_win_min == 0) && (best_win_max == 0))
+		passed = 0;
+	else
+		size = best_win_max - best_win_min;
+
+	debug("RFFD Min: 0x%x\n", best_win_min);
+	debug("RFFD Max: 0x%x\n", best_win_max);
+	rffd_average = ((best_win_min + best_win_max) / 2);
+
+	cal->rffd_min = best_win_min;
+	cal->rffd_max = best_win_max;
+
+	if (rffd_average < 0)
+		rffd_average = 0;
+
+	if (rffd_average > SDRAM_RFDC_RFFD_MAX)
+		rffd_average = SDRAM_RFDC_RFFD_MAX;
+
+	mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average));
+
+	rffd = rffd_average;
+	in_window = 0;
+
+	curr_win_min = curr_win_max = 0;
+	best_win_min = best_win_max = 0;
+	for (rqfd = 0; rqfd <= SDRAM_RQDC_RQFD_MAX; rqfd++) {
+		mfsdram(SDRAM_RQDC, rqdc_reg);
+		rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK);
+		mtsdram(SDRAM_RQDC, rqdc_reg | SDRAM_RQDC_RQFD_ENCODE(rqfd));
+
+		pass = 1;
+		for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) {
+
+			mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf);
+
+			/* Banks enabled */
+			if (bxcf & SDRAM_BXCF_M_BE_MASK) {
+				/* Bank is enabled */
+				membase = get_membase(bxcr_num);
+				pass &= short_mem_test(membase);
+			} /* if bank enabled */
+		} /* for bxcf_num */
+
+		/* If this value passed */
+		if (pass && !in_window) {
+			in_window = 1;
+			curr_win_min = curr_win_max = rqfd;
+		} else if (!pass && in_window) {
+			in_window = 0;
+		} else if (pass && in_window) {
+			curr_win_max = rqfd;
+		}
+
+		if (in_window) {
+			if ((curr_win_max - curr_win_min) >
+			    (best_win_max - best_win_min)) {
+				best_win_min = curr_win_min;
+				best_win_max = curr_win_max;
+			}
+			passed = 1;
+		}
+	} /* for rqfd */
+
+	if ((best_win_min == 0) && (best_win_max == 0))
+		passed = 0;
+
+	debug("RQFD Min: 0x%x\n", best_win_min);
+	debug("RQFD Max: 0x%x\n", best_win_max);
+	rqfd_average = ((best_win_min + best_win_max) / 2);
+
+	if (rqfd_average < 0)
+		rqfd_average = 0;
+
+	if (rqfd_average > SDRAM_RQDC_RQFD_MAX)
+		rqfd_average = SDRAM_RQDC_RQFD_MAX;
+
+	mtsdram(SDRAM_RQDC, (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
+					SDRAM_RQDC_RQFD_ENCODE(rqfd_average));
+
+	mfsdram(SDRAM_RQDC, rqdc_reg);
+	mfsdram(SDRAM_RFDC, rfdc_reg);
+
+	/*
+	 * Need to program RQDC before RFDC. The value is read above.
+	 * That is the reason why auto cal not work.
+	 * See, comments below.
+	 */
+	mtsdram(SDRAM_RQDC, rqdc_reg);
+	mtsdram(SDRAM_RFDC, rfdc_reg);
+
+	debug("RQDC: 0x%08X\n", rqdc_reg);
+	debug("RFDC: 0x%08X\n", rfdc_reg);
+
+	/* if something passed, then return the size of the largest window */
+	if (passed != 0) {
+		passed		= size;
+		cal->rqfd	= rqfd_average;
+		cal->rffd	= rffd_average;
+	}
+
+	return (uint)passed;
+}
+#endif /* defined(CONFIG_PPC4xx_DDR_METHOD_A) */
+
+/*
+ * Default table for DDR auto-calibration of all
+ * possible WRDTR and CLKTR values.
+ * Table format is:
+ *	 {SDRAM_WRDTR.[WDTR], SDRAM_CLKTR.[CKTR]}
+ *
+ * Table is terminated with {-1, -1} value pair.
+ *
+ * Board vendors can specify their own board specific subset of
+ * known working {SDRAM_WRDTR.[WDTR], SDRAM_CLKTR.[CKTR]} value
+ * pairs via a board defined ddr_scan_option() function.
+ */
+struct sdram_timing full_scan_options[] = {
+	{0, 0}, {0, 1}, {0, 2}, {0, 3},
+	{1, 0}, {1, 1}, {1, 2}, {1, 3},
+	{2, 0}, {2, 1}, {2, 2}, {2, 3},
+	{3, 0}, {3, 1}, {3, 2}, {3, 3},
+	{4, 0}, {4, 1}, {4, 2}, {4, 3},
+	{5, 0}, {5, 1}, {5, 2}, {5, 3},
+	{6, 0}, {6, 1}, {6, 2}, {6, 3},
+	{-1, -1}
+};
+
+/*---------------------------------------------------------------------------+
+| DQS_calibration.
++----------------------------------------------------------------------------*/
+u32 DQS_autocalibration(void)
+{
+	u32 wdtr;
+	u32 clkp;
+	u32 result = 0;
+	u32 best_result = 0;
+	u32 best_rdcc;
+	struct ddrautocal ddrcal;
+	struct autocal_clks tcal;
+	ulong rfdc_reg;
+	ulong rqdc_reg;
+	u32 val;
+	int verbose_lvl = 0;
+	char *str;
+	char slash[] = "\\|/-\\|/-";
+	int loopi = 0;
+	struct sdram_timing *scan_list;
+
+#if defined(DEBUG_PPC4xx_DDR_AUTOCALIBRATION)
+	int i;
+	char tmp[64];	/* long enough for environment variables */
+#endif
+
+	memset(&tcal, 0, sizeof(tcal));
+
+	ddr_scan_option((ulong)full_scan_options);
+
+	scan_list =
+	      (struct sdram_timing *)ddr_scan_option((ulong)full_scan_options);
+
+	mfsdram(SDRAM_MCOPT1, val);
+	if ((val & SDRAM_MCOPT1_MCHK_CHK_REP) == SDRAM_MCOPT1_MCHK_CHK_REP)
+		str = "ECC Auto calibration -";
+	else
+		str = "Auto calibration -";
+
+	puts(str);
+
+#if defined(DEBUG_PPC4xx_DDR_AUTOCALIBRATION)
+	i = getenv_r("autocalib", tmp, sizeof(tmp));
+	if (i < 0)
+		strcpy(tmp, CONFIG_AUTOCALIB);
+
+	if (strcmp(tmp, "final") == 0) {
+		/* display the final autocalibration results only */
+		verbose_lvl = 1;
+	} else if (strcmp(tmp, "loop") == 0) {
+		/* display summary autocalibration info per iteration */
+		verbose_lvl = 2;
+	} else if (strcmp(tmp, "display") == 0) {
+		/* display full debug autocalibration window info. */
+		verbose_lvl = 3;
+	}
+#endif /* (DEBUG_PPC4xx_DDR_AUTOCALIBRATION) */
+
+	best_rdcc = (SDRAM_RDCC_RDSS_T4 >> 30);
+
+	while ((scan_list->wrdtr != -1) && (scan_list->clktr != -1)) {
+		wdtr = scan_list->wrdtr;
+		clkp = scan_list->clktr;
+
+		mfsdram(SDRAM_WRDTR, val);
+		val &= ~(SDRAM_WRDTR_LLWP_MASK | SDRAM_WRDTR_WTR_MASK);
+		mtsdram(SDRAM_WRDTR, (val |
+			ddr_wrdtr(SDRAM_WRDTR_LLWP_1_CYC | (wdtr << 25))));
+
+		mtsdram(SDRAM_CLKTR, clkp << 30);
+
+		putc('\b');
+		putc(slash[loopi++ % 8]);
+
+#ifdef DEBUG
+		debug("\n");
+		debug("*** --------------\n");
+		mfsdram(SDRAM_WRDTR, val);
+		debug("*** SDRAM_WRDTR set to 0x%08x\n", val);
+		mfsdram(SDRAM_CLKTR, val);
+		debug("*** SDRAM_CLKTR set to 0x%08x\n", val);
+#endif
+
+		debug("\n");
+		if (verbose_lvl > 2) {
+			printf("*** SDRAM_WRDTR (wdtr) set to %d\n", wdtr);
+			printf("*** SDRAM_CLKTR (clkp) set to %d\n", clkp);
+		}
+
+		memset(&ddrcal, 0, sizeof(ddrcal));
+
+		/*
+		 * DQS calibration.
+		 */
+		/*
+		 * program_DQS_calibration_method[A|B]() returns 0 if no
+		 * passing RFDC.[RFFD] window is found or returns the size
+		 * of the best passing window; in the case of a found passing
+		 * window, the ddrcal will contain the values of the best
+		 * window RQDC.[RQFD] and RFDC.[RFFD].
+		 */
+
+		/*
+		 * Call PPC4xx SDRAM DDR autocalibration methodA or methodB.
+		 * Default is methodB.
+		 * Defined the autocalibration method in the board specific
+		 * header file.
+		 * Please see include/configs/kilauea.h for an example for
+		 * a board specific implementation.
+		 */
+#if defined(CONFIG_PPC4xx_DDR_METHOD_A)
+		result = program_DQS_calibration_methodA(&ddrcal);
+#else
+		result = program_DQS_calibration_methodB(&ddrcal);
+#endif
+
+		sync();
+
+		/*
+		 * Clear potential errors resulting from auto-calibration.
+		 * If not done, then we could get an interrupt later on when
+		 * exceptions are enabled.
+		 */
+		set_mcsr(get_mcsr());
+
+		val = ddrcal.rdcc;	/* RDCC from the best passing window */
+
+		udelay(100);
+
+		if (verbose_lvl > 1) {
+			char *tstr;
+			switch ((val >> 30)) {
+			case 0:
+				if (result != 0)
+					tstr = "T1";
+				else
+					tstr = "N/A";
+				break;
+			case 1:
+				tstr = "T2";
+				break;
+			case 2:
+				tstr = "T3";
+				break;
+			case 3:
+				tstr = "T4";
+				break;
+			default:
+				tstr = "unknown";
+				break;
+			}
+			printf("** WRDTR(%d) CLKTR(%d), Wind (%d), best (%d), "
+			       "max-min(0x%04x)(0x%04x), RDCC: %s\n",
+				wdtr, clkp, result, best_result,
+				ddrcal.rffd_min, ddrcal.rffd_max, tstr);
+		}
+
+		/*
+		 * The DQS calibration "result" is either "0"
+		 * if no passing window was found, or is the
+		 * size of the RFFD passing window.
+		 */
+		if (result != 0) {
+			tcal.autocal.flags = 1;
+			debug("*** (%d)(%d) result passed window size: 0x%08x, "
+			      "rqfd = 0x%08x, rffd = 0x%08x, rdcc = 0x%08x\n",
+				wdtr, clkp, result, ddrcal.rqfd,
+				ddrcal.rffd, ddrcal.rdcc);
+			/*
+			 * Save the SDRAM_WRDTR and SDRAM_CLKTR
+			 * settings for the largest returned
+			 * RFFD passing window size.
+			 */
+			if (result > best_result) {
+				/*
+				 * want the lowest Read Sample Cycle Select
+				 */
+				val = (val & SDRAM_RDCC_RDSS_MASK) >> 30;
+				debug("*** (%d) (%d) current_rdcc, best_rdcc\n",
+							val, best_rdcc);
+				if (val <= best_rdcc) {
+					best_rdcc = val;
+					tcal.clocks.wrdtr = wdtr;
+					tcal.clocks.clktr = clkp;
+					tcal.clocks.rdcc = (val << 30);
+					tcal.autocal.rqfd = ddrcal.rqfd;
+					tcal.autocal.rffd = ddrcal.rffd;
+					best_result = result;
+
+					if (verbose_lvl > 2) {
+						printf("** (%d)(%d)  "
+						       "best result: 0x%04x\n",
+							wdtr, clkp,
+							best_result);
+						printf("** (%d)(%d)  "
+						       "best WRDTR: 0x%04x\n",
+							wdtr, clkp,
+							tcal.clocks.wrdtr);
+						printf("** (%d)(%d)  "
+						       "best CLKTR: 0x%04x\n",
+							wdtr, clkp,
+							tcal.clocks.clktr);
+						printf("** (%d)(%d)  "
+						       "best RQDC: 0x%04x\n",
+							wdtr, clkp,
+							tcal.autocal.rqfd);
+						printf("** (%d)(%d)  "
+						       "best RFDC: 0x%04x\n",
+							wdtr, clkp,
+							tcal.autocal.rffd);
+						printf("** (%d)(%d)  "
+						       "best RDCC: 0x%08x\n",
+							wdtr, clkp,
+							(u32)tcal.clocks.rdcc);
+						mfsdram(SDRAM_RTSR, val);
+						printf("** (%d)(%d)  best "
+						       "loop RTSR: 0x%08x\n",
+							wdtr, clkp, val);
+						mfsdram(SDRAM_FCSR, val);
+						printf("** (%d)(%d)  best "
+						       "loop FCSR: 0x%08x\n",
+							wdtr, clkp, val);
+					}
+				} /* if (val <= best_rdcc) */
+			} /* if (result >= best_result) */
+		} /* if (result != 0) */
+		scan_list++;
+	} /* while ((scan_list->wrdtr != -1) && (scan_list->clktr != -1)) */
+
+	if (tcal.autocal.flags == 1) {
+		if (verbose_lvl > 0) {
+			printf("*** --------------\n");
+			printf("*** best_result window size: %d\n",
+							best_result);
+			printf("*** best_result WRDTR: 0x%04x\n",
+							tcal.clocks.wrdtr);
+			printf("*** best_result CLKTR: 0x%04x\n",
+							tcal.clocks.clktr);
+			printf("*** best_result RQFD: 0x%04x\n",
+							tcal.autocal.rqfd);
+			printf("*** best_result RFFD: 0x%04x\n",
+							tcal.autocal.rffd);
+			printf("*** best_result RDCC: 0x%04x\n",
+							tcal.clocks.rdcc);
+			printf("*** --------------\n");
+			printf("\n");
+		}
+
+		/*
+		 * if got best passing result window, then lock in the
+		 * best CLKTR, WRDTR, RQFD, and RFFD values
+		 */
+		mfsdram(SDRAM_WRDTR, val);
+		mtsdram(SDRAM_WRDTR, (val &
+		    ~(SDRAM_WRDTR_LLWP_MASK | SDRAM_WRDTR_WTR_MASK)) |
+		    ddr_wrdtr(SDRAM_WRDTR_LLWP_1_CYC |
+					(tcal.clocks.wrdtr << 25)));
+
+		mtsdram(SDRAM_CLKTR, tcal.clocks.clktr << 30);
+
+		mfsdram(SDRAM_RQDC, rqdc_reg);
+		rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK);
+		mtsdram(SDRAM_RQDC, rqdc_reg |
+				SDRAM_RQDC_RQFD_ENCODE(tcal.autocal.rqfd));
+
+		mfsdram(SDRAM_RQDC, rqdc_reg);
+		debug("*** best_result: read value SDRAM_RQDC 0x%08x\n",
+				rqdc_reg);
+
+		mfsdram(SDRAM_RFDC, rfdc_reg);
+		rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK);
+		mtsdram(SDRAM_RFDC, rfdc_reg |
+				SDRAM_RFDC_RFFD_ENCODE(tcal.autocal.rffd));
+
+		mfsdram(SDRAM_RFDC, rfdc_reg);
+		debug("*** best_result: read value SDRAM_RFDC 0x%08x\n",
+				rfdc_reg);
+		mfsdram(SDRAM_RDCC, val);
+		debug("***  SDRAM_RDCC 0x%08x\n", val);
+	} else {
+		/*
+		 * no valid windows were found
+		 */
+		printf("DQS memory calibration window can not be determined, "
+		       "terminating u-boot.\n");
+		ppc4xx_ibm_ddr2_register_dump();
+		spd_ddr_init_hang();
+	}
+
+	blank_string(strlen(str));
+
+	return 0;
+}
+#else /* defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */
+u32 DQS_autocalibration(void)
+{
+	return 0;
+}
+#endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */
+#endif /* defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) */
diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile
index c773400a5..463b57566 100644
--- a/cpu/ppc4xx/Makefile
+++ b/cpu/ppc4xx/Makefile
@@ -35,6 +35,9 @@ SOBJS	+= kgdb.o
 COBJS	:= 40x_spd_sdram.o
 COBJS	+= 44x_spd_ddr.o
 COBJS	+= 44x_spd_ddr2.o
+ifdef CONFIG_PPC4xx_DDR_AUTOCALIBRATION
+COBJS	+= 4xx_ibm_ddr2_autocalib.o
+endif
 COBJS	+= 4xx_pci.o
 COBJS	+= 4xx_pcie.o
 COBJS	+= bedbug_405.o
diff --git a/cpu/ppc4xx/miiphy.c b/cpu/ppc4xx/miiphy.c
index c8827201e..84b1bbe54 100644
--- a/cpu/ppc4xx/miiphy.c
+++ b/cpu/ppc4xx/miiphy.c
@@ -180,8 +180,10 @@ int phy_setup_aneg (char *devname, unsigned char addr)
  *
  * sr: Currently on 460EX only EMAC0 works with MDIO, so we always
  * return EMAC0 offset here
+ * vg: For 460EX/460GT if internal GPCS PHY address is specified
+ * return appropriate EMAC offset
  */
-unsigned int miiphy_getemac_offset (void)
+unsigned int miiphy_getemac_offset(u8 addr)
 {
 #if (defined(CONFIG_440) && \
     !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
@@ -233,6 +235,35 @@ unsigned int miiphy_getemac_offset (void)
 		return 0x100;
 #endif
 
+#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
+	u32 eoffset = 0;
+
+	switch (addr) {
+#if defined(CONFIG_HAS_ETH1) && defined(CONFIG_GPCS_PHY1_ADDR)
+	case CONFIG_GPCS_PHY1_ADDR:
+		if (addr == EMAC_M1_IPPA_GET(in_be32((void *)EMAC_M1 + 0x100)))
+			eoffset = 0x100;
+		break;
+#endif
+#if defined(CONFIG_HAS_ETH2) && defined(CONFIG_GPCS_PHY2_ADDR)
+	case CONFIG_GPCS_PHY2_ADDR:
+		if (addr == EMAC_M1_IPPA_GET(in_be32((void *)EMAC_M1 + 0x300)))
+			eoffset = 0x300;
+		break;
+#endif
+#if defined(CONFIG_HAS_ETH3) && defined(CONFIG_GPCS_PHY3_ADDR)
+	case CONFIG_GPCS_PHY3_ADDR:
+		if (addr == EMAC_M1_IPPA_GET(in_be32((void *)EMAC_M1 + 0x400)))
+			eoffset = 0x400;
+		break;
+#endif
+	default:
+		eoffset = 0;
+		break;
+	}
+	return eoffset;
+#endif
+
 	return 0;
 #endif
 }
@@ -262,7 +293,7 @@ static int emac_miiphy_command(u8 addr, u8 reg, int cmd, u16 value)
 	u32 emac_reg;
 	u32 sta_reg;
 
-	emac_reg = miiphy_getemac_offset();
+	emac_reg = miiphy_getemac_offset(addr);
 
 	/* wait for completion */
 	if (emac_miiphy_wait(emac_reg) != 0)
@@ -311,7 +342,7 @@ int emac4xx_miiphy_read (char *devname, unsigned char addr, unsigned char reg,
 	unsigned long sta_reg;
 	unsigned long emac_reg;
 
-	emac_reg = miiphy_getemac_offset ();
+	emac_reg = miiphy_getemac_offset(addr);
 
 	if (emac_miiphy_command(addr, reg, EMAC_STACR_READ, 0) != 0)
 		return -1;
diff --git a/include/asm-ppc/ppc4xx-sdram.h b/include/asm-ppc/ppc4xx-sdram.h
index 0174d6235..8efa55797 100644
--- a/include/asm-ppc/ppc4xx-sdram.h
+++ b/include/asm-ppc/ppc4xx-sdram.h
@@ -29,6 +29,7 @@
 /*
  * SDRAM Controller
  */
+
 /*
  * XXX - ToDo: Revisit file to change all these lower case defines into
  * upper case. Also needs to be done in the controller setup code too
@@ -256,6 +257,7 @@
 #define SDRAM_DLYCAL_DLCV_ENCODE(x)	(((x)<<2) & SDRAM_DLYCAL_DLCV_MASK)
 #define SDRAM_DLYCAL_DLCV_DECODE(x)	(((x) & SDRAM_DLYCAL_DLCV_MASK)>>2)
 
+#if !defined(CONFIG_405EX)
 /*
  * Memory queue defines
  */
@@ -293,7 +295,6 @@
 
 #define SDRAM_PLBADDUHB		(SDRAMQ_DCR_BASE+0x10)  /* PLB base address upper 32 LL */
 
-#if !defined(CONFIG_405EX)
 /*
  * Memory Bank 0-7 configuration
  */
@@ -1401,4 +1402,18 @@
 
 #endif /* CONFIG_SDRAM_PPC4xx_DENALI_DDR2 */
 
+#ifndef __ASSEMBLY__
+/*
+ * Prototypes
+ */
+void inline blank_string(int size);
+inline void ppc4xx_ibm_ddr2_register_dump(void);
+u32 mfdcr_any(u32);
+void mtdcr_any(u32, u32);
+u32 ddr_wrdtr(u32);
+u32 ddr_clktr(u32);
+void spd_ddr_init_hang(void);
+u32 DQS_autocalibration(void);
+#endif /* __ASSEMBLY__ */
+
 #endif /* _PPC4xx_SDRAM_H_ */
diff --git a/include/configs/CPCI4052.h b/include/configs/CPCI4052.h
index fd49f569a..9ec172189 100644
--- a/include/configs/CPCI4052.h
+++ b/include/configs/CPCI4052.h
@@ -146,6 +146,8 @@
 
 #define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
 
+#define CONFIG_CMDLINE_EDITING		/* add command line history	*/
+
 #define CONFIG_LOOPW            1       /* enable loopw command         */
 
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
@@ -219,6 +221,10 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
diff --git a/include/configs/CPCI405AB.h b/include/configs/CPCI405AB.h
index 55dd6296d..78995984f 100644
--- a/include/configs/CPCI405AB.h
+++ b/include/configs/CPCI405AB.h
@@ -144,6 +144,8 @@
 
 #define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
 
+#define CONFIG_CMDLINE_EDITING		/* add command line history	*/
+
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
 
 #define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
@@ -215,6 +217,10 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index 2ceda001c..86ea6c69b 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -281,7 +281,6 @@
  ***********************************************************/
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		1	/* PHY address			*/
-#define CONFIG_CS8952_PHY	1	/* its a CS8952 PHY		*/
 /************************************************************
  * RTC
  ***********************************************************/
diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h
index a475f97e6..f9eaa7777 100644
--- a/include/configs/kilauea.h
+++ b/include/configs/kilauea.h
@@ -223,6 +223,22 @@
  *----------------------------------------------------------------------*/
 #define CFG_MBYTES_SDRAM        (256)		/* 256MB			*/
 
+/*
+ * CONFIG_PPC4xx_DDR_AUTOCALIBRATION
+ *
+ * Note: DDR Autocalibration Method_A scans the full range of possible PPC4xx
+ *       SDRAM Controller DDR autocalibration values and takes a lot longer
+ *       to run than Method_B.
+ * (See the Method_A and Method_B algorithm discription in the file:
+ *	cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c)
+ * Define CONFIG_PPC4xx_DDR_METHOD_A to use DDR autocalibration Method_A
+ *
+ * DDR Autocalibration Method_B is the default.
+ */
+#define	CONFIG_PPC4xx_DDR_AUTOCALIBRATION	/* IBM DDR autocalibration */
+#define	DEBUG_PPC4xx_DDR_AUTOCALIBRATION	/* dynamic DDR autocal debug */
+#undef	CONFIG_PPC4xx_DDR_METHOD_A
+
 #define	CFG_SDRAM0_MB0CF_BASE	((  0 << 20) + CFG_SDRAM_BASE)
 
 /* DDR1/2 SDRAM Device Control Register Data Values */
@@ -386,6 +402,9 @@
 #define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"   */
 #define CONFIG_PHY1_ADDR	2
 
+/* Debug messages for the DDR autocalibration */
+#define CONFIG_AUTOCALIB		"silent\0"  /* default is non-verbose */
+
 /*
  * Default environment variables
  */
diff --git a/include/configs/ml507.h b/include/configs/ml507.h
index f8cd49998..37d93bb3c 100644
--- a/include/configs/ml507.h
+++ b/include/configs/ml507.h
@@ -17,106 +17,33 @@
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
-/*
-#define DEBUG
-#define ET_DEBUG
-*/
- /*CPU*/
-#define CONFIG_XILINX_ML507	1
-#define CONFIG_XILINX_440	1
+
+/*CPU*/
 #define CONFIG_440		1
-#define CONFIG_4xx		1
+#define CONFIG_XILINX_ML507	1
 #include "../board/xilinx/ml507/xparameters.h"
 
 /*Mem Map*/
-#define CFG_SDRAM_BASE		0x0
 #define CFG_SDRAM_SIZE_MB	256
-#define CFG_MONITOR_BASE	TEXT_BASE
-#define CFG_MONITOR_LEN		( 192 * 1024 )
-#define CFG_MALLOC_LEN		( CFG_ENV_SIZE + 128 * 1024 )
-
-/*Uart*/
-#define CONFIG_XILINX_UARTLITE
-#define CONFIG_BAUDRATE		XPAR_UARTLITE_0_BAUDRATE
-#define CFG_BAUDRATE_TABLE	{ XPAR_UARTLITE_0_BAUDRATE }
-#define CONFIG_SERIAL_BASE	XPAR_UARTLITE_0_BASEADDR
-
-/*Cmd*/
-#include <config_cmd_default.h>
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_JFFS2
-#define CONFIG_JFFS2_CMDLINE
-#undef CONFIG_CMD_I2C
-#undef CONFIG_CMD_DTT
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_PING
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_EEPROM
-#undef CONFIG_CMD_IMLS
 
 /*Env*/
-#define	CFG_ENV_IS_IN_FLASH
+#define	CFG_ENV_IS_IN_FLASH	1
 #define	CFG_ENV_SIZE		0x20000
 #define	CFG_ENV_SECT_SIZE	0x20000
-#define CFG_ENV_OFFSET 		0x340000
-#define CFG_ENV_ADDR 		(XPAR_FLASH_MEM0_BASEADDR+CFG_ENV_OFFSET)
+#define CFG_ENV_OFFSET		0x340000
+#define CFG_ENV_ADDR		(XPAR_FLASH_MEM0_BASEADDR+CFG_ENV_OFFSET)
 
 /*Misc*/
-#define CONFIG_BOOTDELAY	5		/* autoboot after 5 seconds     */
-#define CFG_LONGHELP				/* undef to save memory         */
-#define CFG_PROMPT		"board:/# "	/* Monitor Command Prompt       */
-#if defined(CONFIG_CMD_KGDB)
-#define CFG_CBSIZE		1024		/* Console I/O Buffer Size      */
-#else
-#define CFG_CBSIZE		256		/* Console I/O Buffer Size      */
-#endif
-#define CFG_PBSIZE		( CFG_CBSIZE + sizeof( CFG_PROMPT ) + 16 )
-#define CFG_MAXARGS		16		/* max number of command args   */
-#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
-#define CFG_MEMTEST_START	0x00400000	/* memtest works on           */
-#define CFG_MEMTEST_END		0x00C00000	/* 4 ... 12 MB in DRAM        */
-#define CFG_LOAD_ADDR		0x00400000	/* default load address       */
-#define CFG_EXTBDINFO		1		/* Extended board_into (bd_t) */
-#define CFG_HZ			1000		/* decrementer freq: 1 ms ticks */
-#define CONFIG_CMDLINE_EDITING			/* add command line history     */
-#define CONFIG_AUTO_COMPLETE			/* add autocompletion support   */
-#define CONFIG_LOOPW				/* enable loopw command         */
-#define CONFIG_MX_CYCLIC			/* enable mdc/mwc commands      */
-#define CONFIG_ZERO_BOOTDELAY_CHECK		/* check for keypress on bootdelay==0 */
-#define CONFIG_VERSION_VARIABLE			/* include version env variable */
-#define CFG_CONSOLE_INFO_QUIET			/* don't print console @ startup */
-#define CFG_HUSH_PARSER				/* Use the HUSH parser          */
-#define	CFG_PROMPT_HUSH_PS2	"> "
-#define CONFIG_LOADS_ECHO			/* echo on for serial download  */
-#define CFG_LOADS_BAUD_CHANGE			/* allow baudrate change        */
-#define CFG_BOOTMAPSZ		( 8 << 20 )	/* Initial Memory map for Linux */
+#define CFG_PROMPT		"ml507:/# "	/* Monitor Command Prompt    */
 #define CONFIG_PREBOOT		"echo U-Boot is up and runnining;"
 
-/*Stack*/
-#define CFG_INIT_RAM_ADDR	0x800000	/* Initial RAM address    */
-#define CFG_INIT_RAM_END	0x2000		/* End of used area in RAM  */
-#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data   */
-#define CFG_GBL_DATA_OFFSET	( CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE )
-#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
-/*Speed*/
-#define CONFIG_SYS_CLK_FREQ	XPAR_CORE_CLOCK_FREQ_HZ
-
 /*Flash*/
-#define	CFG_FLASH_BASE		XPAR_FLASH_MEM0_BASEADDR
 #define	CFG_FLASH_SIZE		(32*1024*1024)
-#define	CFG_FLASH_CFI		1
-#define	CONFIG_FLASH_CFI_DRIVER	1
-#define	CFG_FLASH_EMPTY_INFO	1
-#define	CFG_MAX_FLASH_BANKS	1
 #define	CFG_MAX_FLASH_SECT	259
-#define	CFG_FLASH_PROTECTION
 #define MTDIDS_DEFAULT		"nor0=ml507-flash"
 #define MTDPARTS_DEFAULT	"mtdparts=ml507-flash:-(user)"
 
+/*Generic Configs*/
+#include <configs/xilinx-ppc440.h>
 
 #endif						/* __CONFIG_H */
diff --git a/include/configs/v5fx30teval.h b/include/configs/v5fx30teval.h
new file mode 100644
index 000000000..67d8d7f63
--- /dev/null
+++ b/include/configs/v5fx30teval.h
@@ -0,0 +1,49 @@
+/*
+ * (C) Copyright 2008
+ *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ *  This work has been supported by: QTechnology  http://qtec.com/
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*CPU*/
+#define CONFIG_440		1
+#define CONFIG_XILINX_ML507	1
+#include "../board/avnet/v5fx30teval/xparameters.h"
+
+/*Mem Map*/
+#define CFG_SDRAM_SIZE_MB	64
+
+/*Env*/
+#define	CFG_ENV_IS_IN_FLASH	1
+#define	CFG_ENV_SIZE		0x20000
+#define	CFG_ENV_SECT_SIZE	0x20000
+#define CFG_ENV_OFFSET		0x1A0000
+#define CFG_ENV_ADDR		(XPAR_FLASH_MEM0_BASEADDR+CFG_ENV_OFFSET)
+
+/*Misc*/
+#define CFG_PROMPT		"v5fx30t:/# "	/* Monitor Command Prompt    */
+#define CONFIG_PREBOOT		"echo U-Boot is up and runnining;"
+
+/*Flash*/
+#define	CFG_FLASH_SIZE		(16*1024*1024)
+#define	CFG_MAX_FLASH_SECT	131
+#define MTDIDS_DEFAULT		"nor0=v5fx30t-flash"
+#define MTDPARTS_DEFAULT	"mtdparts=v5fx30t-flash:-(user)"
+
+/*Generic Configs*/
+#include <configs/xilinx-ppc440.h>
+
+#endif						/* __CONFIG_H */
diff --git a/include/configs/xilinx-ppc440-generic.h b/include/configs/xilinx-ppc440-generic.h
new file mode 100644
index 000000000..4e8080bf6
--- /dev/null
+++ b/include/configs/xilinx-ppc440-generic.h
@@ -0,0 +1,49 @@
+/*
+ * (C) Copyright 2008
+ *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ *  This work has been supported by: QTechnology  http://qtec.com/
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*CPU*/
+#define CONFIG_440			1
+#define CONFIG_XILINX_PPC440_GENERIC	1
+#include "../board/xilinx/ppc440-generic/xparameters.h"
+
+/*Mem Map*/
+#define CFG_SDRAM_SIZE_MB	256
+
+/*Env*/
+#define	CFG_ENV_IS_IN_FLASH	1
+#define	CFG_ENV_SIZE		0x20000
+#define	CFG_ENV_SECT_SIZE	0x20000
+#define CFG_ENV_OFFSET		0x340000
+#define CFG_ENV_ADDR		(XPAR_FLASH_MEM0_BASEADDR+CFG_ENV_OFFSET)
+
+/*Misc*/
+#define CFG_PROMPT		"board:/# "	/* Monitor Command Prompt    */
+#define CONFIG_PREBOOT		"echo U-Boot is up and runnining;"
+
+/*Flash*/
+#define	CFG_FLASH_SIZE		(32*1024*1024)
+#define	CFG_MAX_FLASH_SECT	259
+#define MTDIDS_DEFAULT		"nor0=ml507-flash"
+#define MTDPARTS_DEFAULT	"mtdparts=ml507-flash:-(user)"
+
+/*Generic Configs*/
+#include <configs/xilinx-ppc440.h>
+
+#endif						/* __CONFIG_H */
diff --git a/include/configs/xilinx-ppc440.h b/include/configs/xilinx-ppc440.h
new file mode 100644
index 000000000..40293cd84
--- /dev/null
+++ b/include/configs/xilinx-ppc440.h
@@ -0,0 +1,106 @@
+/*
+ * (C) Copyright 2008
+ *  Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
+ *  This work has been supported by: QTechnology  http://qtec.com/
+ *  This program is free software: you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation, either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef __CONFIG_GEN_H
+#define __CONFIG_GEN_H
+/*
+#define DEBUG
+#define ET_DEBUG
+*/
+ /*CPU*/
+#define CONFIG_XILINX_440	1
+#define CONFIG_440		1
+#define CONFIG_4xx		1
+
+/*Mem Map*/
+#define CFG_SDRAM_BASE		0x0
+#define CFG_MONITOR_BASE	TEXT_BASE
+#define CFG_MONITOR_LEN		(192 * 1024)
+#define CFG_MALLOC_LEN		(CFG_ENV_SIZE + 128 * 1024)
+
+/*Uart*/
+#define CONFIG_XILINX_UARTLITE
+#define CONFIG_BAUDRATE		XPAR_UARTLITE_0_BAUDRATE
+#define CFG_BAUDRATE_TABLE	{ XPAR_UARTLITE_0_BAUDRATE }
+#define CONFIG_SERIAL_BASE	XPAR_UARTLITE_0_BASEADDR
+
+/*Cmd*/
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_JFFS2
+#define CONFIG_JFFS2_CMDLINE
+#undef CONFIG_CMD_SPI
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_DTT
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_PING
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_IMLS
+
+/*Misc*/
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds     */
+#define CFG_LONGHELP			/* undef to save memory         */
+#if defined(CONFIG_CMD_KGDB)
+#define CFG_CBSIZE		1024	/* Console I/O Buffer Size      */
+#else
+#define CFG_CBSIZE		256	/* Console I/O Buffer Size      */
+#endif
+#define CFG_PBSIZE		(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+#define CFG_MAXARGS		16	/* max number of command args   */
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_MEMTEST_START	0x00400000	/* memtest works on           */
+#define CFG_MEMTEST_END		0x00C00000	/* 4 ... 12 MB in DRAM        */
+#define CFG_LOAD_ADDR		0x00400000	/* default load address       */
+#define CFG_EXTBDINFO		1	/* Extended board_into (bd_t) */
+#define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
+#define CONFIG_CMDLINE_EDITING		/* add command line history     */
+#define CONFIG_AUTO_COMPLETE		/* add autocompletion support   */
+#define CONFIG_LOOPW			/* enable loopw command         */
+#define CONFIG_MX_CYCLIC		/* enable mdc/mwc commands      */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE		/* include version env variable */
+#define CFG_CONSOLE_INFO_QUIET		/* don't print console @ startup */
+#define CFG_HUSH_PARSER			/* Use the HUSH parser          */
+#define	CFG_PROMPT_HUSH_PS2	"> "
+#define CONFIG_LOADS_ECHO		/* echo on for serial download  */
+#define CFG_LOADS_BAUD_CHANGE		/* allow baudrate change        */
+#define CFG_BOOTMAPSZ		(8 << 20)/* Initial Memory map for Linux */
+
+/*Stack*/
+#define CFG_INIT_RAM_ADDR	0x800000	/* Initial RAM address    */
+#define CFG_INIT_RAM_END	0x2000		/* End of used area in RAM  */
+#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data   */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+/*Speed*/
+#define CONFIG_SYS_CLK_FREQ	XPAR_CORE_CLOCK_FREQ_HZ
+
+/*Flash*/
+#define	CFG_FLASH_BASE		XPAR_FLASH_MEM0_BASEADDR
+#define	CFG_FLASH_CFI		1
+#define	CONFIG_FLASH_CFI_DRIVER	1
+#define	CFG_FLASH_EMPTY_INFO	1
+#define	CFG_MAX_FLASH_BANKS	1
+#define	CFG_FLASH_PROTECTION
+
+#endif						/* __CONFIG_H */
diff --git a/include/ppc440.h b/include/ppc440.h
index 3584fd24e..be8d3ffef 100644
--- a/include/ppc440.h
+++ b/include/ppc440.h
@@ -2064,19 +2064,6 @@
 
 #ifndef __ASSEMBLY__
 
-static inline u32 get_mcsr(void)
-{
-	u32 val;
-
-	asm volatile("mfspr %0, 0x23c" : "=r" (val) :);
-	return val;
-}
-
-static inline void set_mcsr(u32 val)
-{
-	asm volatile("mtspr 0x23c, %0" : "=r" (val) :);
-}
-
 #endif	/* _ASMLANGUAGE */
 
 #endif	/* __PPC440_H__ */
diff --git a/include/ppc4xx.h b/include/ppc4xx.h
index 59a3b06b7..e216663a8 100644
--- a/include/ppc4xx.h
+++ b/include/ppc4xx.h
@@ -203,6 +203,19 @@ typedef struct
 	unsigned long pllPlbDiv;
 } PPC4xx_SYS_INFO;
 
+static inline u32 get_mcsr(void)
+{
+	u32 val;
+
+	asm volatile("mfspr %0, 0x23c" : "=r" (val) :);
+	return val;
+}
+
+static inline void set_mcsr(u32 val)
+{
+	asm volatile("mtspr 0x23c, %0" : "=r" (val) :);
+}
+
 #endif	/* __ASSEMBLY__ */
 
 #endif	/* __PPC4XX_H__ */
diff --git a/include/ppc4xx_enet.h b/include/ppc4xx_enet.h
index b74c6fcaf..00669a717 100644
--- a/include/ppc4xx_enet.h
+++ b/include/ppc4xx_enet.h
@@ -376,6 +376,7 @@ typedef struct emac_4xx_hw_st {
 #define EMAC_M1_APP		(0x08000000)
 #define EMAC_M1_RSVD		(0x06000000)
 #define EMAC_M1_IST		(0x01000000)
+#define EMAC_M1_MF_1000GPCS	(0x00C00000)
 #define EMAC_M1_MF_1000MBPS	(0x00800000)	/* 0's for 10MBPS */
 #define EMAC_M1_MF_100MBPS	(0x00400000)
 #define EMAC_M1_RFS_MASK	(0x00380000)
@@ -394,6 +395,8 @@ typedef struct emac_4xx_hw_st {
 #define EMAC_M1_MWSW		(0x00007000)
 #define EMAC_M1_JUMBO_ENABLE	(0x00000800)
 #define EMAC_M1_IPPA		(0x000007c0)
+#define EMAC_M1_IPPA_SET(id)	(((id) & 0x1f) << 6)
+#define EMAC_M1_IPPA_GET(id)	(((id) >> 6) & 0x1f)
 #define EMAC_M1_OBCI_GT100	(0x00000020)
 #define EMAC_M1_OBCI_100	(0x00000018)
 #define EMAC_M1_OBCI_83		(0x00000010)