diff options
Diffstat (limited to 'include/uapi/linux/usb/ch11.h')
| -rw-r--r-- | include/uapi/linux/usb/ch11.h | 266 |
1 files changed, 266 insertions, 0 deletions
diff --git a/include/uapi/linux/usb/ch11.h b/include/uapi/linux/usb/ch11.h new file mode 100644 index 00000000000..7692dc69ccf --- /dev/null +++ b/include/uapi/linux/usb/ch11.h @@ -0,0 +1,266 @@ +/* + * This file holds Hub protocol constants and data structures that are + * defined in chapter 11 (Hub Specification) of the USB 2.0 specification. + * + * It is used/shared between the USB core, the HCDs and couple of other USB + * drivers. + */ + +#ifndef __LINUX_CH11_H +#define __LINUX_CH11_H + +#include <linux/types.h> /* __u8 etc */ + +/* + * Hub request types + */ + +#define USB_RT_HUB (USB_TYPE_CLASS | USB_RECIP_DEVICE) +#define USB_RT_PORT (USB_TYPE_CLASS | USB_RECIP_OTHER) + +/* + * Hub class requests + * See USB 2.0 spec Table 11-16 + */ +#define HUB_CLEAR_TT_BUFFER 8 +#define HUB_RESET_TT 9 +#define HUB_GET_TT_STATE 10 +#define HUB_STOP_TT 11 + +/* + * Hub class additional requests defined by USB 3.0 spec + * See USB 3.0 spec Table 10-6 + */ +#define HUB_SET_DEPTH 12 +#define HUB_GET_PORT_ERR_COUNT 13 + +/* + * Hub Class feature numbers + * See USB 2.0 spec Table 11-17 + */ +#define C_HUB_LOCAL_POWER 0 +#define C_HUB_OVER_CURRENT 1 + +/* + * Port feature numbers + * See USB 2.0 spec Table 11-17 + */ +#define USB_PORT_FEAT_CONNECTION 0 +#define USB_PORT_FEAT_ENABLE 1 +#define USB_PORT_FEAT_SUSPEND 2 /* L2 suspend */ +#define USB_PORT_FEAT_OVER_CURRENT 3 +#define USB_PORT_FEAT_RESET 4 +#define USB_PORT_FEAT_L1 5 /* L1 suspend */ +#define USB_PORT_FEAT_POWER 8 +#define USB_PORT_FEAT_LOWSPEED 9 /* Should never be used */ +#define USB_PORT_FEAT_C_CONNECTION 16 +#define USB_PORT_FEAT_C_ENABLE 17 +#define USB_PORT_FEAT_C_SUSPEND 18 +#define USB_PORT_FEAT_C_OVER_CURRENT 19 +#define USB_PORT_FEAT_C_RESET 20 +#define USB_PORT_FEAT_TEST 21 +#define USB_PORT_FEAT_INDICATOR 22 +#define USB_PORT_FEAT_C_PORT_L1 23 + +/* + * Port feature selectors added by USB 3.0 spec. + * See USB 3.0 spec Table 10-7 + */ +#define USB_PORT_FEAT_LINK_STATE 5 +#define USB_PORT_FEAT_U1_TIMEOUT 23 +#define USB_PORT_FEAT_U2_TIMEOUT 24 +#define USB_PORT_FEAT_C_PORT_LINK_STATE 25 +#define USB_PORT_FEAT_C_PORT_CONFIG_ERROR 26 +#define USB_PORT_FEAT_REMOTE_WAKE_MASK 27 +#define USB_PORT_FEAT_BH_PORT_RESET 28 +#define USB_PORT_FEAT_C_BH_PORT_RESET 29 +#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30 + +#define USB_PORT_LPM_TIMEOUT(p) (((p) & 0xff) << 8) + +/* USB 3.0 hub remote wake mask bits, see table 10-14 */ +#define USB_PORT_FEAT_REMOTE_WAKE_CONNECT (1 << 8) +#define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT (1 << 9) +#define USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT (1 << 10) + +/* + * Hub Status and Hub Change results + * See USB 2.0 spec Table 11-19 and Table 11-20 + */ +struct usb_port_status { + __le16 wPortStatus; + __le16 wPortChange; +} __attribute__ ((packed)); + +/* + * wPortStatus bit field + * See USB 2.0 spec Table 11-21 + */ +#define USB_PORT_STAT_CONNECTION 0x0001 +#define USB_PORT_STAT_ENABLE 0x0002 +#define USB_PORT_STAT_SUSPEND 0x0004 +#define USB_PORT_STAT_OVERCURRENT 0x0008 +#define USB_PORT_STAT_RESET 0x0010 +#define USB_PORT_STAT_L1 0x0020 +/* bits 6 to 7 are reserved */ +#define USB_PORT_STAT_POWER 0x0100 +#define USB_PORT_STAT_LOW_SPEED 0x0200 +#define USB_PORT_STAT_HIGH_SPEED 0x0400 +#define USB_PORT_STAT_TEST 0x0800 +#define USB_PORT_STAT_INDICATOR 0x1000 +/* bits 13 to 15 are reserved */ + +/* + * Additions to wPortStatus bit field from USB 3.0 + * See USB 3.0 spec Table 10-10 + */ +#define USB_PORT_STAT_LINK_STATE 0x01e0 +#define USB_SS_PORT_STAT_POWER 0x0200 +#define USB_SS_PORT_STAT_SPEED 0x1c00 +#define USB_PORT_STAT_SPEED_5GBPS 0x0000 +/* Valid only if port is enabled */ +/* Bits that are the same from USB 2.0 */ +#define USB_SS_PORT_STAT_MASK (USB_PORT_STAT_CONNECTION | \ + USB_PORT_STAT_ENABLE | \ + USB_PORT_STAT_OVERCURRENT | \ + USB_PORT_STAT_RESET) + +/* + * Definitions for PORT_LINK_STATE values + * (bits 5-8) in wPortStatus + */ +#define USB_SS_PORT_LS_U0 0x0000 +#define USB_SS_PORT_LS_U1 0x0020 +#define USB_SS_PORT_LS_U2 0x0040 +#define USB_SS_PORT_LS_U3 0x0060 +#define USB_SS_PORT_LS_SS_DISABLED 0x0080 +#define USB_SS_PORT_LS_RX_DETECT 0x00a0 +#define USB_SS_PORT_LS_SS_INACTIVE 0x00c0 +#define USB_SS_PORT_LS_POLLING 0x00e0 +#define USB_SS_PORT_LS_RECOVERY 0x0100 +#define USB_SS_PORT_LS_HOT_RESET 0x0120 +#define USB_SS_PORT_LS_COMP_MOD 0x0140 +#define USB_SS_PORT_LS_LOOPBACK 0x0160 + +/* + * wPortChange bit field + * See USB 2.0 spec Table 11-22 and USB 2.0 LPM ECN Table-4.10 + * Bits 0 to 5 shown, bits 6 to 15 are reserved + */ +#define USB_PORT_STAT_C_CONNECTION 0x0001 +#define USB_PORT_STAT_C_ENABLE 0x0002 +#define USB_PORT_STAT_C_SUSPEND 0x0004 +#define USB_PORT_STAT_C_OVERCURRENT 0x0008 +#define USB_PORT_STAT_C_RESET 0x0010 +#define USB_PORT_STAT_C_L1 0x0020 +/* + * USB 3.0 wPortChange bit fields + * See USB 3.0 spec Table 10-11 + */ +#define USB_PORT_STAT_C_BH_RESET 0x0020 +#define USB_PORT_STAT_C_LINK_STATE 0x0040 +#define USB_PORT_STAT_C_CONFIG_ERROR 0x0080 + +/* + * wHubCharacteristics (masks) + * See USB 2.0 spec Table 11-13, offset 3 + */ +#define HUB_CHAR_LPSM 0x0003 /* Logical Power Switching Mode mask */ +#define HUB_CHAR_COMMON_LPSM 0x0000 /* All ports power control at once */ +#define HUB_CHAR_INDV_PORT_LPSM 0x0001 /* per-port power control */ +#define HUB_CHAR_NO_LPSM 0x0002 /* no power switching */ + +#define HUB_CHAR_COMPOUND 0x0004 /* hub is part of a compound device */ + +#define HUB_CHAR_OCPM 0x0018 /* Over-Current Protection Mode mask */ +#define HUB_CHAR_COMMON_OCPM 0x0000 /* All ports Over-Current reporting */ +#define HUB_CHAR_INDV_PORT_OCPM 0x0008 /* per-port Over-current reporting */ +#define HUB_CHAR_NO_OCPM 0x0010 /* No Over-current Protection support */ + +#define HUB_CHAR_TTTT 0x0060 /* TT Think Time mask */ +#define HUB_CHAR_PORTIND 0x0080 /* per-port indicators (LEDs) */ + +struct usb_hub_status { + __le16 wHubStatus; + __le16 wHubChange; +} __attribute__ ((packed)); + +/* + * Hub Status & Hub Change bit masks + * See USB 2.0 spec Table 11-19 and Table 11-20 + * Bits 0 and 1 for wHubStatus and wHubChange + * Bits 2 to 15 are reserved for both + */ +#define HUB_STATUS_LOCAL_POWER 0x0001 +#define HUB_STATUS_OVERCURRENT 0x0002 +#define HUB_CHANGE_LOCAL_POWER 0x0001 +#define HUB_CHANGE_OVERCURRENT 0x0002 + + +/* + * Hub descriptor + * See USB 2.0 spec Table 11-13 + */ + +#define USB_DT_HUB (USB_TYPE_CLASS | 0x09) +#define USB_DT_SS_HUB (USB_TYPE_CLASS | 0x0a) +#define USB_DT_HUB_NONVAR_SIZE 7 +#define USB_DT_SS_HUB_SIZE 12 + +/* + * Hub Device descriptor + * USB Hub class device protocols + */ + +#define USB_HUB_PR_FS 0 /* Full speed hub */ +#define USB_HUB_PR_HS_NO_TT 0 /* Hi-speed hub without TT */ +#define USB_HUB_PR_HS_SINGLE_TT 1 /* Hi-speed hub with single TT */ +#define USB_HUB_PR_HS_MULTI_TT 2 /* Hi-speed hub with multiple TT */ +#define USB_HUB_PR_SS 3 /* Super speed hub */ + +struct usb_hub_descriptor { + __u8 bDescLength; + __u8 bDescriptorType; + __u8 bNbrPorts; + __le16 wHubCharacteristics; + __u8 bPwrOn2PwrGood; + __u8 bHubContrCurrent; + + /* 2.0 and 3.0 hubs differ here */ + union { + struct { + /* add 1 bit for hub status change; round to bytes */ + __u8 DeviceRemovable[(USB_MAXCHILDREN + 1 + 7) / 8]; + __u8 PortPwrCtrlMask[(USB_MAXCHILDREN + 1 + 7) / 8]; + } __attribute__ ((packed)) hs; + + struct { + __u8 bHubHdrDecLat; + __le16 wHubDelay; + __le16 DeviceRemovable; + } __attribute__ ((packed)) ss; + } u; +} __attribute__ ((packed)); + +/* port indicator status selectors, tables 11-7 and 11-25 */ +#define HUB_LED_AUTO 0 +#define HUB_LED_AMBER 1 +#define HUB_LED_GREEN 2 +#define HUB_LED_OFF 3 + +enum hub_led_mode { + INDICATOR_AUTO = 0, + INDICATOR_CYCLE, + /* software blinks for attention: software, hardware, reserved */ + INDICATOR_GREEN_BLINK, INDICATOR_GREEN_BLINK_OFF, + INDICATOR_AMBER_BLINK, INDICATOR_AMBER_BLINK_OFF, + INDICATOR_ALT_BLINK, INDICATOR_ALT_BLINK_OFF +} __attribute__ ((packed)); + +/* Transaction Translator Think Times, in bits */ +#define HUB_TTTT_8_BITS 0x00 +#define HUB_TTTT_16_BITS 0x20 +#define HUB_TTTT_24_BITS 0x40 +#define HUB_TTTT_32_BITS 0x60 + +#endif /* __LINUX_CH11_H */ |