diff options
Diffstat (limited to 'drivers/net/wireless/rt2x00/rt2800usb.c')
| -rw-r--r-- | drivers/net/wireless/rt2x00/rt2800usb.c | 159 |
1 files changed, 65 insertions, 94 deletions
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 5a2dfe87c6b..3dff56ec195 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -1,5 +1,6 @@ /* - Copyright (C) 2009 Ivo van Doorn <IvDoorn@gmail.com> + Copyright (C) 2010 Willow Garage <http://www.willowgarage.com> + Copyright (C) 2009 - 2010 Ivo van Doorn <IvDoorn@gmail.com> Copyright (C) 2009 Mattias Nissler <mattias.nissler@gmx.de> Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org> Copyright (C) 2009 Xose Vazquez Perez <xose.vazquez@gmail.com> @@ -100,19 +101,6 @@ static int rt2800usb_write_firmware(struct rt2x00_dev *rt2x00dev, msleep(10); rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); - /* - * Send signal to firmware during boot time. - */ - rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0); - - if (rt2x00_rt(rt2x00dev, RT3070) || - rt2x00_rt(rt2x00dev, RT3071) || - rt2x00_rt(rt2x00dev, RT3572)) { - udelay(200); - rt2800_mcu_request(rt2x00dev, MCU_CURRENT, 0, 0, 0); - udelay(10); - } - return 0; } @@ -134,26 +122,18 @@ static void rt2800usb_toggle_rx(struct rt2x00_dev *rt2x00dev, static int rt2800usb_init_registers(struct rt2x00_dev *rt2x00dev) { u32 reg; - int i; /* * Wait until BBP and RF are ready. */ - for (i = 0; i < REGISTER_BUSY_COUNT; i++) { - rt2800_register_read(rt2x00dev, MAC_CSR0, ®); - if (reg && reg != ~0) - break; - msleep(1); - } - - if (i == REGISTER_BUSY_COUNT) { - ERROR(rt2x00dev, "Unstable hardware.\n"); + if (rt2800_wait_csr_ready(rt2x00dev)) return -EBUSY; - } rt2800_register_read(rt2x00dev, PBF_SYS_CTRL, ®); rt2800_register_write(rt2x00dev, PBF_SYS_CTRL, reg & ~0x00002000); + rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003); + rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_CSR, 1); rt2x00_set_field32(®, MAC_SYS_CTRL_RESET_BBP, 1); @@ -172,30 +152,10 @@ static int rt2800usb_init_registers(struct rt2x00_dev *rt2x00dev) static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev) { u32 reg; - u16 word; - /* - * Initialize all registers. - */ - if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev) || - rt2800_init_registers(rt2x00dev) || - rt2800_init_bbp(rt2x00dev) || - rt2800_init_rfcsr(rt2x00dev))) + if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev))) return -EIO; - rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); - rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); - rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); - - udelay(50); - - rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); - rt2x00_set_field32(®, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1); - rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1); - rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1); - rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); - - rt2800_register_read(rt2x00dev, USB_DMA_CFG, ®); rt2x00_set_field32(®, USB_DMA_CFG_PHY_CLEAR, 0); rt2x00_set_field32(®, USB_DMA_CFG_RX_BULK_AGG_EN, 0); @@ -210,45 +170,12 @@ static int rt2800usb_enable_radio(struct rt2x00_dev *rt2x00dev) rt2x00_set_field32(®, USB_DMA_CFG_TX_BULK_EN, 1); rt2800_register_write(rt2x00dev, USB_DMA_CFG, reg); - rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, ®); - rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_TX, 1); - rt2x00_set_field32(®, MAC_SYS_CTRL_ENABLE_RX, 1); - rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, reg); - - /* - * Initialize LED control - */ - rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word); - rt2800_mcu_request(rt2x00dev, MCU_LED_1, 0xff, - word & 0xff, (word >> 8) & 0xff); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word); - rt2800_mcu_request(rt2x00dev, MCU_LED_2, 0xff, - word & 0xff, (word >> 8) & 0xff); - - rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word); - rt2800_mcu_request(rt2x00dev, MCU_LED_3, 0xff, - word & 0xff, (word >> 8) & 0xff); - - return 0; + return rt2800_enable_radio(rt2x00dev); } static void rt2800usb_disable_radio(struct rt2x00_dev *rt2x00dev) { - u32 reg; - - rt2800_register_read(rt2x00dev, WPDMA_GLO_CFG, ®); - rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0); - rt2x00_set_field32(®, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0); - rt2800_register_write(rt2x00dev, WPDMA_GLO_CFG, reg); - - rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0); - rt2800_register_write(rt2x00dev, PWR_PIN_CFG, 0); - rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0); - - /* Wait for DMA, ignore error */ - rt2800_wait_wpdma_ready(rt2x00dev); - + rt2800_disable_radio(rt2x00dev); rt2x00usb_disable_radio(rt2x00dev); } @@ -320,21 +247,19 @@ static int rt2800usb_set_device_state(struct rt2x00_dev *rt2x00dev, /* * TX descriptor initialization */ -static void rt2800usb_write_tx_data(struct queue_entry* entry, - struct txentry_desc *txdesc) +static __le32 *rt2800usb_get_txwi(struct queue_entry *entry) { - __le32 *txwi = (__le32 *) (entry->skb->data + TXINFO_DESC_SIZE); - - rt2800_write_txwi(txwi, txdesc); + if (entry->queue->qid == QID_BEACON) + return (__le32 *) (entry->skb->data); + else + return (__le32 *) (entry->skb->data + TXINFO_DESC_SIZE); } - -static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, - struct sk_buff *skb, +static void rt2800usb_write_tx_desc(struct queue_entry *entry, struct txentry_desc *txdesc) { - struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); - __le32 *txi = (__le32 *) skb->data; + struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); + __le32 *txi = (__le32 *) entry->skb->data; u32 word; /* @@ -342,7 +267,7 @@ static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, */ rt2x00_desc_read(txi, 0, &word); rt2x00_set_field32(&word, TXINFO_W0_USB_DMA_TX_PKT_LEN, - skb->len - TXINFO_DESC_SIZE); + entry->skb->len - TXINFO_DESC_SIZE); rt2x00_set_field32(&word, TXINFO_W0_WIV, !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags)); rt2x00_set_field32(&word, TXINFO_W0_QSEL, 2); @@ -379,6 +304,46 @@ static int rt2800usb_get_tx_data_len(struct queue_entry *entry) } /* + * TX control handlers + */ +static void rt2800usb_work_txdone(struct work_struct *work) +{ + struct rt2x00_dev *rt2x00dev = + container_of(work, struct rt2x00_dev, txdone_work); + struct data_queue *queue; + struct queue_entry *entry; + + rt2800_txdone(rt2x00dev); + + /* + * Process any trailing TX status reports for IO failures, + * we loop until we find the first non-IO error entry. This + * can either be a frame which is free, is being uploaded, + * or has completed the upload but didn't have an entry + * in the TX_STAT_FIFO register yet. + */ + tx_queue_for_each(rt2x00dev, queue) { + while (!rt2x00queue_empty(queue)) { + entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE); + + if (test_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags) || + !test_bit(ENTRY_DATA_IO_FAILED, &entry->flags)) + break; + + rt2x00lib_txdone_noinfo(entry, TXDONE_FAILURE); + } + } +} + +static void rt2800usb_kill_tx_queue(struct data_queue *queue) +{ + if (queue->qid == QID_BEACON) + rt2x00usb_register_write(queue->rt2x00dev, BCN_TIME_CFG, 0); + + rt2x00usb_kill_tx_queue(queue); +} + +/* * RX control handlers */ static void rt2800usb_fill_rxdone(struct queue_entry *entry, @@ -514,6 +479,11 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev) */ rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; + /* + * Overwrite TX done handler + */ + PREPARE_WORK(&rt2x00dev->txdone_work, rt2800usb_work_txdone); + return 0; } @@ -549,6 +519,7 @@ static const struct rt2800_ops rt2800usb_rt2800_ops = { .regbusy_read = rt2x00usb_regbusy_read, .drv_write_firmware = rt2800usb_write_firmware, .drv_init_registers = rt2800usb_init_registers, + .drv_get_txwi = rt2800usb_get_txwi, }; static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = { @@ -566,11 +537,11 @@ static const struct rt2x00lib_ops rt2800usb_rt2x00_ops = { .link_tuner = rt2800_link_tuner, .watchdog = rt2x00usb_watchdog, .write_tx_desc = rt2800usb_write_tx_desc, - .write_tx_data = rt2800usb_write_tx_data, + .write_tx_data = rt2800_write_tx_data, .write_beacon = rt2800_write_beacon, .get_tx_data_len = rt2800usb_get_tx_data_len, .kick_tx_queue = rt2x00usb_kick_tx_queue, - .kill_tx_queue = rt2x00usb_kill_tx_queue, + .kill_tx_queue = rt2800usb_kill_tx_queue, .fill_rxdone = rt2800usb_fill_rxdone, .config_shared_key = rt2800_config_shared_key, .config_pairwise_key = rt2800_config_pairwise_key, |